#!/bin/sh
#
# Copyright (c) 2006 - 2008 Kungliga Tekniska Högskolan
# (Royal Institute of Technology, Stockholm, Sweden). 
# All rights reserved. 
#
# Redistribution and use in source and binary forms, with or without 
# modification, are permitted provided that the following conditions 
# are met: 
#
# 1. Redistributions of source code must retain the above copyright 
#    notice, this list of conditions and the following disclaimer. 
#
# 2. Redistributions in binary form must reproduce the above copyright 
#    notice, this list of conditions and the following disclaimer in the 
#    documentation and/or other materials provided with the distribution. 
#
# 3. Neither the name of the Institute nor the names of its contributors 
#    may be used to endorse or promote products derived from this software 
#    without specific prior written permission. 
#
# THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND 
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
# ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE 
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 
# SUCH DAMAGE. 

top_builddir="@top_builddir@"
env_setup="@env_setup@"
objdir="@objdir@"

testfailed="echo test failed; cat messages.log; exit 1"

. ${env_setup}

# If there is no useful db support compiled in, disable test
${have_db} || exit 77

R=TEST.H5L.SE

port=@port@

kadmin="${kadmin} -l -r $R"
kdc="${kdc} --addresses=localhost -P $port"

server=host/datan.test.h5l.se
cache="FILE:${objdir}/cache.krb5"
keyfile="${hx509_data}/key.der"
keyfile2="${hx509_data}/key2.der"

kinit="${kinit} -c $cache ${afs_no_afslog}"
kgetcred="${kgetcred} -c $cache"
kdestroy="${kdestroy} -c $cache ${afs_no_unlog}"

KRB5_CONFIG="${objdir}/krb5-pkinit.conf"
export KRB5_CONFIG

rsa=yes
pkinit=no
if ${hxtool} info | grep 'rsa: hx509 null RSA' > /dev/null ; then
    rsa=no
fi
if ${hxtool} info | grep 'rand: not available' > /dev/null ; then
    rsa=no
fi

if ${kinit} --help 2>&1 | grep "CA certificates" > /dev/null; then
    pkinit=yes
fi

# If we doesn't support pkinit and have RSA, give up
if test "$pkinit" != yes -o "$rsa" != yes ; then
    exit 77
fi


rm -f current-db*
rm -f out-*
rm -f mkey.file*

> messages.log

echo Creating database
${kadmin} \
    init \
    --realm-max-ticket-life=1day \
    --realm-max-renewable-life=1month \
    ${R} || exit 1

${kadmin} add -p foo --use-defaults foo@${R} || exit 1
${kadmin} add -p bar --use-defaults bar@${R} || exit 1
${kadmin} add -p baz --use-defaults baz@${R} || exit 1
${kadmin} modify --alias=baz2@test.h5l.se baz@${R} || exit 1
${kadmin} modify --pkinit-acl="CN=baz,DC=test,DC=h5l,DC=se" baz@${R} || exit 1

${kadmin} add -p kaka --use-defaults ${server}@${R} || exit 1

echo "Doing database check"
${kadmin} check ${R} || exit 1

echo "Setting up certificates"
${hxtool} request-create \
	 --subject="CN=kdc,DC=test,DC=h5l,DC=se" \
	 --key=FILE:${keyfile2} \
	 req-kdc.der || exit 1
${hxtool} request-create \
	 --subject="CN=bar,DC=test,DC=h5l,DC=se" \
	 --key=FILE:${keyfile2} \
	 req-pkinit.der || exit 1
${hxtool} request-create \
	 --subject="CN=baz,DC=test,DC=h5l,DC=se" \
	 --key=FILE:${keyfile2} \
	 req-pkinit2.der || exit 1

echo "issue self-signed ca cert"
${hxtool} issue-certificate \
	  --self-signed \
	  --issue-ca \
	  --ca-private-key=FILE:${keyfile} \
          --subject="CN=CA,DC=test,DC=h5l,DC=se" \
	  --certificate="FILE:ca.crt" || exit 1

echo "issue kdc certificate"
${hxtool} issue-certificate \
	  --ca-certificate=FILE:$objdir/ca.crt,${keyfile} \
	  --type="pkinit-kdc" \
          --pk-init-principal="krbtgt/TEST.H5L.SE@TEST.H5L.SE" \
	  --req="PKCS10:req-kdc.der" \
	  --certificate="FILE:kdc.crt" || exit 1

echo "issue user certificate (pkinit san)"
${hxtool} issue-certificate \
	  --ca-certificate=FILE:$objdir/ca.crt,${keyfile} \
	  --type="pkinit-client" \
          --pk-init-principal="bar@TEST.H5L.SE" \
	  --req="PKCS10:req-pkinit.der" \
	  --certificate="FILE:pkinit.crt" || exit 1

echo "issue user 2 certificate (no san)"
${hxtool} issue-certificate \
	  --ca-certificate=FILE:$objdir/ca.crt,${keyfile} \
	  --type="pkinit-client" \
	  --req="PKCS10:req-pkinit2.der" \
	  --certificate="FILE:pkinit2.crt" || exit 1

echo "issue user 3 certificate (ms san)"
${hxtool} issue-certificate \
	  --ca-certificate=FILE:$objdir/ca.crt,${keyfile} \
	  --type="pkinit-client" \
          --ms-upn="bar@test.h5l.se" \
	  --req="PKCS10:req-pkinit2.der" \
	  --certificate="FILE:pkinit3.crt" || exit 1

echo "issue user 3 certificate (ms san, baz2)"
${hxtool} issue-certificate \
	  --ca-certificate=FILE:$objdir/ca.crt,${keyfile} \
	  --type="pkinit-client" \
          --ms-upn="baz2@test.h5l.se" \
	  --req="PKCS10:req-pkinit2.der" \
	  --certificate="FILE:pkinit4.crt" || exit 1


echo foo > ${objdir}/foopassword

echo Starting kdc ; > messages.log
${kdc} --detach --testing || { echo "kdc failed to start"; exit 1; }
kdcpid=`getpid kdc`

trap "kill -9 ${kdcpid}; echo signal killing kdc; cat ca.crt kdc.crt pkinit.crt ;exit 1;" EXIT

ec=0

echo "Trying pk-init (principal in cert)"; > messages.log
base="${objdir}"
${kinit} -C FILE:${base}/pkinit.crt,${keyfile2} bar@${R} || \
	{ ec=1 ; eval "${testfailed}"; }
${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "Trying pk-init (principal in pki-mapping file) "; > messages.log
${kinit} -C FILE:${base}/pkinit.crt,${keyfile2} foo@${R} || \
	{ ec=1 ; eval "${testfailed}"; }
${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "Trying pk-init (principal subject in DB)"; > messages.log
${kinit} -C FILE:${base}/pkinit2.crt,${keyfile2} baz@${R} || \
	{ ec=1 ; eval "${testfailed}"; }
${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "Trying pk-init (ms upn)"; > messages.log
${kinit} -C FILE:${base}/pkinit3.crt,${keyfile2} bar@${R} || \
	{ ec=1 ; eval "${testfailed}"; }
${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "Trying pk-init (ms upn, enterprise)"; > messages.log
${kinit}  --canonicalize \
	-C FILE:${base}/pkinit4.crt,${keyfile2} baz2@test.h5l.se@${R} || \
	{ ec=1 ; eval "${testfailed}"; }
${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "Trying pk-init (ms upn, enterprise, pk-enterprise)"; > messages.log
${kinit} --canonicalize \
	--pk-enterprise \
	-C FILE:${base}/pkinit4.crt,${keyfile2} ${R} || \
	{ ec=1 ; eval "${testfailed}"; }
${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
${kdestroy}

KRB5_CONFIG="${objdir}/krb5-pkinit-win.conf"
export KRB5_CONFIG

echo "Duplicated tests, now in windows 2000 mode"

echo "Trying pk-init (principal in cert)"; > messages.log
base="${objdir}"
${kinit} -C FILE:${base}/pkinit.crt,${keyfile2} bar@${R} || \
	{ ec=1 ; eval "${testfailed}"; }
${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "Trying pk-init (principal in pki-mapping file) "; > messages.log
${kinit} -C FILE:${base}/pkinit.crt,${keyfile2} foo@${R} || \
	{ ec=1 ; eval "${testfailed}"; }
${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "Trying pk-init (principal subject in DB)"; > messages.log
${kinit} -C FILE:${base}/pkinit2.crt,${keyfile2} baz@${R} || \
	{ ec=1 ; eval "${testfailed}"; }
${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "Trying pk-init (ms upn)"; > messages.log
${kinit} -C FILE:${base}/pkinit3.crt,${keyfile2} bar@${R} || \
	{ ec=1 ; eval "${testfailed}"; }
${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
${kdestroy}


KRB5_CONFIG="${objdir}/krb5-pkinit.conf"
export KRB5_CONFIG

echo "Trying PKCS11 support"

cat > test-rc-file.rc <<EOF
certificate	cert	User certificate	FILE:${base}/pkinit.crt,${keyfile2}
app-fatal	true
EOF

SOFTPKCS11RC="test-rc-file.rc"
export SOFTPKCS11RC

dir=${base}/../../lib/hx509
file=

for a in libhx509.so .libs/libhx509.so libhx509.dylib .libs/libhx509.dylib ; do
    if [ -f $dir/$a ] ; then
	file=$dir/$a
	break
    fi
done

if [ X"$file" != X -a @DLOPEN@ ] ; then

    echo "Trying pk-init (principal in pki-mapping file) "; > messages.log
    ${kinit} -C PKCS11:${file} foo@${R} || \
	{ ec=1 ; eval "${testfailed}"; }
    ${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
    ${kdestroy}

fi


echo "killing kdc (${kdcpid})"
sh ${leaks_kill} kdc $kdcpid || exit 1

trap "" EXIT

exit $ec
