# Makefile.in generated by automake 1.16.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2018 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Copyright © 2016 Broadcom
# Copyright © 2016 Intel Corporation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice (including the next
# paragraph) shall be included in all copies or substantial portions of the
# Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
# IN THE SOFTWARE.

# Copyright © 2016 Intel Corporation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice (including the next
# paragraph) shall be included in all copies or substantial portions of the
# Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
# IN THE SOFTWARE.




VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
noinst_PROGRAMS =
check_PROGRAMS = qpu/tests/qpu_disasm$(EXEEXT)
@USE_V3D_SIMULATOR_TRUE@am__append_1 = $(V3D_SIMULATOR_CFLAGS)
subdir = src/broadcom
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_compile_flag.m4 \
	$(top_srcdir)/m4/ax_check_gnu_make.m4 \
	$(top_srcdir)/m4/ax_check_python_mako_module.m4 \
	$(top_srcdir)/m4/ax_gcc_builtin.m4 \
	$(top_srcdir)/m4/ax_gcc_func_attribute.m4 \
	$(top_srcdir)/m4/ax_prog_bison.m4 \
	$(top_srcdir)/m4/ax_prog_flex.m4 \
	$(top_srcdir)/m4/ax_pthread.m4 $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/VERSION $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(noinst_HEADERS) \
	$(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
PROGRAMS = $(noinst_PROGRAMS)
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__installdirs = "$(DESTDIR)$(libdir)"
LTLIBRARIES = $(lib_LTLIBRARIES) $(noinst_LTLIBRARIES)
cle_libbroadcom_cle_la_LIBADD =
am__dirstamp = $(am__leading_dot)dirstamp
am__objects_1 = cle/libbroadcom_cle_la-v3d_decoder.lo
am_cle_libbroadcom_cle_la_OBJECTS = $(am__objects_1)
cle_libbroadcom_cle_la_OBJECTS = $(am_cle_libbroadcom_cle_la_OBJECTS)
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 = 
cle_libbroadcom_cle_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
	$(cle_libbroadcom_cle_la_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
libbroadcom_la_LIBADD =
am__objects_2 = clif/clif_dump.lo common/v3d_debug.lo \
	compiler/nir_to_vir.lo compiler/vir.lo compiler/vir_dump.lo \
	compiler/vir_live_variables.lo compiler/vir_lower_uniforms.lo \
	compiler/vir_opt_copy_propagate.lo \
	compiler/vir_opt_dead_code.lo \
	compiler/vir_opt_small_immediates.lo \
	compiler/vir_register_allocate.lo compiler/vir_to_qpu.lo \
	compiler/qpu_schedule.lo compiler/qpu_validate.lo \
	compiler/v3d33_tex.lo compiler/v3d33_vpm_setup.lo \
	compiler/v3d40_tex.lo compiler/v3d_nir_lower_io.lo \
	compiler/v3d_nir_lower_txf_ms.lo qpu/qpu_disasm.lo \
	qpu/qpu_instr.lo qpu/qpu_pack.lo
am_libbroadcom_la_OBJECTS = $(am__objects_2)
libbroadcom_la_OBJECTS = $(am_libbroadcom_la_OBJECTS)
libbroadcom_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
	$(AM_CFLAGS) $(CFLAGS) $(libbroadcom_la_LDFLAGS) $(LDFLAGS) -o \
	$@
libbroadcom_v33_la_LIBADD =
am__objects_3 = clif/libbroadcom_v33_la-v3dx_dump.lo
am_libbroadcom_v33_la_OBJECTS = $(am__objects_3)
libbroadcom_v33_la_OBJECTS = $(am_libbroadcom_v33_la_OBJECTS)
libbroadcom_v33_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
	$(libbroadcom_v33_la_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
libbroadcom_v41_la_LIBADD =
am__objects_4 = clif/libbroadcom_v41_la-v3dx_dump.lo
am_libbroadcom_v41_la_OBJECTS = $(am__objects_4)
libbroadcom_v41_la_OBJECTS = $(am_libbroadcom_v41_la_OBJECTS)
libbroadcom_v41_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
	$(libbroadcom_v41_la_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
libbroadcom_v42_la_LIBADD =
am__objects_5 = clif/libbroadcom_v42_la-v3dx_dump.lo
am_libbroadcom_v42_la_OBJECTS = $(am__objects_5)
libbroadcom_v42_la_OBJECTS = $(am_libbroadcom_v42_la_OBJECTS)
libbroadcom_v42_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
	$(libbroadcom_v42_la_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
qpu_tests_qpu_disasm_SOURCES = qpu/tests/qpu_disasm.c
qpu_tests_qpu_disasm_OBJECTS = qpu/tests/qpu_disasm.$(OBJEXT)
qpu_tests_qpu_disasm_LDADD = $(LDADD)
qpu_tests_qpu_disasm_DEPENDENCIES = libbroadcom.la \
	$(top_builddir)/src/compiler/nir/libnir.la \
	$(top_builddir)/src/util/libmesautil.la
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
am__maybe_remake_depfiles = depfiles
am__depfiles_remade =  \
	cle/$(DEPDIR)/libbroadcom_cle_la-v3d_decoder.Plo \
	clif/$(DEPDIR)/clif_dump.Plo \
	clif/$(DEPDIR)/libbroadcom_v33_la-v3dx_dump.Plo \
	clif/$(DEPDIR)/libbroadcom_v41_la-v3dx_dump.Plo \
	clif/$(DEPDIR)/libbroadcom_v42_la-v3dx_dump.Plo \
	common/$(DEPDIR)/v3d_debug.Plo \
	compiler/$(DEPDIR)/nir_to_vir.Plo \
	compiler/$(DEPDIR)/qpu_schedule.Plo \
	compiler/$(DEPDIR)/qpu_validate.Plo \
	compiler/$(DEPDIR)/v3d33_tex.Plo \
	compiler/$(DEPDIR)/v3d33_vpm_setup.Plo \
	compiler/$(DEPDIR)/v3d40_tex.Plo \
	compiler/$(DEPDIR)/v3d_nir_lower_io.Plo \
	compiler/$(DEPDIR)/v3d_nir_lower_txf_ms.Plo \
	compiler/$(DEPDIR)/vir.Plo compiler/$(DEPDIR)/vir_dump.Plo \
	compiler/$(DEPDIR)/vir_live_variables.Plo \
	compiler/$(DEPDIR)/vir_lower_uniforms.Plo \
	compiler/$(DEPDIR)/vir_opt_copy_propagate.Plo \
	compiler/$(DEPDIR)/vir_opt_dead_code.Plo \
	compiler/$(DEPDIR)/vir_opt_small_immediates.Plo \
	compiler/$(DEPDIR)/vir_register_allocate.Plo \
	compiler/$(DEPDIR)/vir_to_qpu.Plo qpu/$(DEPDIR)/qpu_disasm.Plo \
	qpu/$(DEPDIR)/qpu_instr.Plo qpu/$(DEPDIR)/qpu_pack.Plo \
	qpu/tests/$(DEPDIR)/qpu_disasm.Po
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo "  CC      " $@;
am__v_CC_1 = 
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo "  CCLD    " $@;
am__v_CCLD_1 = 
SOURCES = $(cle_libbroadcom_cle_la_SOURCES) $(libbroadcom_la_SOURCES) \
	$(libbroadcom_v33_la_SOURCES) $(libbroadcom_v41_la_SOURCES) \
	$(libbroadcom_v42_la_SOURCES) qpu/tests/qpu_disasm.c
DIST_SOURCES = $(cle_libbroadcom_cle_la_SOURCES) \
	$(libbroadcom_la_SOURCES) $(libbroadcom_v33_la_SOURCES) \
	$(libbroadcom_v41_la_SOURCES) $(libbroadcom_v42_la_SOURCES) \
	qpu/tests/qpu_disasm.c
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
DATA = $(noinst_DATA)
HEADERS = $(noinst_HEADERS)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
am__tty_colors_dummy = \
  mgn= red= grn= lgn= blu= brg= std=; \
  am__color_tests=no
am__tty_colors = { \
  $(am__tty_colors_dummy); \
  if test "X$(AM_COLOR_TESTS)" = Xno; then \
    am__color_tests=no; \
  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
    am__color_tests=yes; \
  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
    am__color_tests=yes; \
  fi; \
  if test $$am__color_tests = yes; then \
    red='[0;31m'; \
    grn='[0;32m'; \
    lgn='[1;32m'; \
    blu='[1;34m'; \
    mgn='[0;35m'; \
    brg='[1m'; \
    std='[m'; \
  fi; \
}
am__recheck_rx = ^[ 	]*:recheck:[ 	]*
am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
# A command that, given a newline-separated list of test names on the
# standard input, print the name of the tests that are to be re-run
# upon "make recheck".
am__list_recheck_tests = $(AWK) '{ \
  recheck = 1; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
        { \
          if ((getline line2 < ($$0 ".log")) < 0) \
	    recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
        { \
          recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
        { \
          break; \
        } \
    }; \
  if (recheck) \
    print $$0; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# A command that, given a newline-separated list of test names on the
# standard input, create the global log from their .trs and .log files.
am__create_global_log = $(AWK) ' \
function fatal(msg) \
{ \
  print "fatal: making $@: " msg | "cat >&2"; \
  exit 1; \
} \
function rst_section(header) \
{ \
  print header; \
  len = length(header); \
  for (i = 1; i <= len; i = i + 1) \
    printf "="; \
  printf "\n\n"; \
} \
{ \
  copy_in_global_log = 1; \
  global_test_result = "RUN"; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
         fatal("failed to read from " $$0 ".trs"); \
      if (line ~ /$(am__global_test_result_rx)/) \
        { \
          sub("$(am__global_test_result_rx)", "", line); \
          sub("[ 	]*$$", "", line); \
          global_test_result = line; \
        } \
      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
        copy_in_global_log = 0; \
    }; \
  if (copy_in_global_log) \
    { \
      rst_section(global_test_result ": " $$0); \
      while ((rc = (getline line < ($$0 ".log"))) != 0) \
      { \
        if (rc < 0) \
          fatal("failed to read from " $$0 ".log"); \
        print line; \
      }; \
      printf "\n"; \
    }; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# Restructured Text title.
am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
# Default flags passed to test drivers.
am__common_driver_flags = \
  --color-tests "$$am__color_tests" \
  --enable-hard-errors "$$am__enable_hard_errors" \
  --expect-failure "$$am__expect_failure"
# To be inserted before the command running the test.  Creates the
# directory for the log if needed.  Stores in $dir the directory
# containing $f, in $tst the test, in $log the log.  Executes the
# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
# will run the test scripts (or their associated LOG_COMPILER, if
# thy have one).
am__check_pre = \
$(am__sh_e_setup);					\
$(am__vpath_adj_setup) $(am__vpath_adj)			\
$(am__tty_colors);					\
srcdir=$(srcdir); export srcdir;			\
case "$@" in						\
  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
    *) am__odir=.;; 					\
esac;							\
test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
if test -f "./$$f"; then dir=./;			\
elif test -f "$$f"; then dir=;				\
else dir="$(srcdir)/"; fi;				\
tst=$$dir$$f; log='$@'; 				\
if test -n '$(DISABLE_HARD_ERRORS)'; then		\
  am__enable_hard_errors=no; 				\
else							\
  am__enable_hard_errors=yes; 				\
fi; 							\
case " $(XFAIL_TESTS) " in				\
  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
    am__expect_failure=yes;;				\
  *)							\
    am__expect_failure=no;;				\
esac; 							\
$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
# A shell command to get the names of the tests scripts with any registered
# extension removed (i.e., equivalently, the names of the test logs, with
# the '.log' extension removed).  The result is saved in the shell variable
# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
# since that might cause problem with VPATH rewrites for suffix-less tests.
# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
am__set_TESTS_bases = \
  bases='$(TEST_LOGS)'; \
  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
  bases=`echo $$bases`
RECHECK_LOGS = $(TEST_LOGS)
AM_RECURSIVE_TARGETS = check recheck
TEST_SUITE_LOG = test-suite.log
TEST_EXTENSIONS = @EXEEXT@ .test
LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
am__set_b = \
  case '$@' in \
    */*) \
      case '$*' in \
        */*) b='$*';; \
          *) b=`echo '$@' | sed 's/\.log$$//'`; \
       esac;; \
    *) \
      b='$*';; \
  esac
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
TEST_LOGS = $(am__test_logs2:.test.log=.log)
TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
	$(TEST_LOG_FLAGS)
am__DIST_COMMON = $(srcdir)/Makefile.cle.am \
	$(srcdir)/Makefile.genxml.am $(srcdir)/Makefile.in \
	$(srcdir)/Makefile.sources $(srcdir)/Makefile.v3d.am \
	$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDGPU_CFLAGS = @AMDGPU_CFLAGS@
AMDGPU_LIBS = @AMDGPU_LIBS@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
ANDROID_CFLAGS = @ANDROID_CFLAGS@
ANDROID_LIBS = @ANDROID_LIBS@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BACKTRACE_CFLAGS = @BACKTRACE_CFLAGS@
BACKTRACE_LIBS = @BACKTRACE_LIBS@
BSYMBOLIC = @BSYMBOLIC@
CC = @CC@
CCAS = @CCAS@
CCASDEPMODE = @CCASDEPMODE@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CLANG_RESOURCE_DIR = @CLANG_RESOURCE_DIR@
CLOCK_LIB = @CLOCK_LIB@
CLOVER_STD_OVERRIDE = @CLOVER_STD_OVERRIDE@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXX11_CXXFLAGS = @CXX11_CXXFLAGS@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
D3D_DRIVER_INSTALL_DIR = @D3D_DRIVER_INSTALL_DIR@
DEFINES = @DEFINES@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DLOPEN_LIBS = @DLOPEN_LIBS@
DRI2PROTO_CFLAGS = @DRI2PROTO_CFLAGS@
DRI2PROTO_LIBS = @DRI2PROTO_LIBS@
DRIGL_CFLAGS = @DRIGL_CFLAGS@
DRIGL_LIBS = @DRIGL_LIBS@
DRI_DRIVER_INSTALL_DIR = @DRI_DRIVER_INSTALL_DIR@
DRI_DRIVER_SEARCH_DIR = @DRI_DRIVER_SEARCH_DIR@
DRI_LIB_DEPS = @DRI_LIB_DEPS@
DRI_PC_REQ_PRIV = @DRI_PC_REQ_PRIV@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGL_CFLAGS = @EGL_CFLAGS@
EGL_LIB_DEPS = @EGL_LIB_DEPS@
EGL_NATIVE_PLATFORM = @EGL_NATIVE_PLATFORM@
EGREP = @EGREP@
ETNAVIV_CFLAGS = @ETNAVIV_CFLAGS@
ETNAVIV_LIBS = @ETNAVIV_LIBS@
EXEEXT = @EXEEXT@
EXPAT_CFLAGS = @EXPAT_CFLAGS@
EXPAT_LIBS = @EXPAT_LIBS@
FGREP = @FGREP@
GALLIUM_PIPE_LOADER_DEFINES = @GALLIUM_PIPE_LOADER_DEFINES@
GBM_PC_LIB_PRIV = @GBM_PC_LIB_PRIV@
GBM_PC_REQ_PRIV = @GBM_PC_REQ_PRIV@
GC_SECTIONS = @GC_SECTIONS@
GLESv1_CM_LIB_DEPS = @GLESv1_CM_LIB_DEPS@
GLESv1_CM_PC_LIB_PRIV = @GLESv1_CM_PC_LIB_PRIV@
GLESv2_LIB_DEPS = @GLESv2_LIB_DEPS@
GLESv2_PC_LIB_PRIV = @GLESv2_PC_LIB_PRIV@
GLPROTO_CFLAGS = @GLPROTO_CFLAGS@
GLPROTO_LIBS = @GLPROTO_LIBS@
GLVND_CFLAGS = @GLVND_CFLAGS@
GLVND_LIBS = @GLVND_LIBS@
GLX_TLS = @GLX_TLS@
GL_LIB = @GL_LIB@
GL_LIB_DEPS = @GL_LIB_DEPS@
GL_PC_CFLAGS = @GL_PC_CFLAGS@
GL_PC_LIB_PRIV = @GL_PC_LIB_PRIV@
GL_PC_REQ_PRIV = @GL_PC_REQ_PRIV@
GL_PKGCONF_LIB = @GL_PKGCONF_LIB@
GREP = @GREP@
I915_CFLAGS = @I915_CFLAGS@
I915_LIBS = @I915_LIBS@
INDENT = @INDENT@
INDENT_FLAGS = @INDENT_FLAGS@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LD_BUILD_ID = @LD_BUILD_ID@
LD_NO_UNDEFINED = @LD_NO_UNDEFINED@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBATOMIC_LIBS = @LIBATOMIC_LIBS@
LIBCLC_INCLUDEDIR = @LIBCLC_INCLUDEDIR@
LIBCLC_LIBEXECDIR = @LIBCLC_LIBEXECDIR@
LIBDRM_CFLAGS = @LIBDRM_CFLAGS@
LIBDRM_LIBS = @LIBDRM_LIBS@
LIBELF_CFLAGS = @LIBELF_CFLAGS@
LIBELF_LIBS = @LIBELF_LIBS@
LIBGLVND_DATADIR = @LIBGLVND_DATADIR@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBSENSORS_LIBS = @LIBSENSORS_LIBS@
LIBTOOL = @LIBTOOL@
LIBUNWIND_CFLAGS = @LIBUNWIND_CFLAGS@
LIBUNWIND_LIBS = @LIBUNWIND_LIBS@
LIB_DIR = @LIB_DIR@
LIB_EXT = @LIB_EXT@
LIPO = @LIPO@
LLVM_CFLAGS = @LLVM_CFLAGS@
LLVM_CONFIG = @LLVM_CONFIG@
LLVM_CXXFLAGS = @LLVM_CXXFLAGS@
LLVM_INCLUDEDIR = @LLVM_INCLUDEDIR@
LLVM_LDFLAGS = @LLVM_LDFLAGS@
LLVM_LIBS = @LLVM_LIBS@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MSVC2013_COMPAT_CFLAGS = @MSVC2013_COMPAT_CFLAGS@
MSVC2013_COMPAT_CXXFLAGS = @MSVC2013_COMPAT_CXXFLAGS@
NINE_MAJOR = @NINE_MAJOR@
NINE_MINOR = @NINE_MINOR@
NINE_PATCH = @NINE_PATCH@
NINE_VERSION = @NINE_VERSION@
NM = @NM@
NMEDIT = @NMEDIT@
NOUVEAU_CFLAGS = @NOUVEAU_CFLAGS@
NOUVEAU_LIBS = @NOUVEAU_LIBS@
NVVIEUX_CFLAGS = @NVVIEUX_CFLAGS@
NVVIEUX_LIBS = @NVVIEUX_LIBS@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OMX_BELLAGIO_CFLAGS = @OMX_BELLAGIO_CFLAGS@
OMX_BELLAGIO_LIBS = @OMX_BELLAGIO_LIBS@
OMX_BELLAGIO_LIB_INSTALL_DIR = @OMX_BELLAGIO_LIB_INSTALL_DIR@
OMX_TIZONIA_CFLAGS = @OMX_TIZONIA_CFLAGS@
OMX_TIZONIA_LIBS = @OMX_TIZONIA_LIBS@
OMX_TIZONIA_LIB_INSTALL_DIR = @OMX_TIZONIA_LIB_INSTALL_DIR@
OPENCL_LIBNAME = @OPENCL_LIBNAME@
OPENCL_VERSION = @OPENCL_VERSION@
OSMESA_LIB = @OSMESA_LIB@
OSMESA_LIB_DEPS = @OSMESA_LIB_DEPS@
OSMESA_PC_LIB_PRIV = @OSMESA_PC_LIB_PRIV@
OSMESA_PC_REQ = @OSMESA_PC_REQ@
OSMESA_VERSION = @OSMESA_VERSION@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
POSIX_SHELL = @POSIX_SHELL@
PTHREADSTUBS_CFLAGS = @PTHREADSTUBS_CFLAGS@
PTHREADSTUBS_LIBS = @PTHREADSTUBS_LIBS@
PTHREAD_CC = @PTHREAD_CC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
PWR8_CFLAGS = @PWR8_CFLAGS@
PYTHON = @PYTHON@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
RADEON_CFLAGS = @RADEON_CFLAGS@
RADEON_LIBS = @RADEON_LIBS@
RANLIB = @RANLIB@
RM = @RM@
SCANNER_ARG = @SCANNER_ARG@
SED = @SED@
SELINUX_CFLAGS = @SELINUX_CFLAGS@
SELINUX_LIBS = @SELINUX_LIBS@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SIMPENROSE_CFLAGS = @SIMPENROSE_CFLAGS@
SIMPENROSE_LIBS = @SIMPENROSE_LIBS@
SSE41_CFLAGS = @SSE41_CFLAGS@
STRIP = @STRIP@
SWR_AVX2_CXXFLAGS = @SWR_AVX2_CXXFLAGS@
SWR_AVX_CXXFLAGS = @SWR_AVX_CXXFLAGS@
SWR_KNL_CXXFLAGS = @SWR_KNL_CXXFLAGS@
SWR_SKX_CXXFLAGS = @SWR_SKX_CXXFLAGS@
V3D_SIMULATOR_CFLAGS = @V3D_SIMULATOR_CFLAGS@
V3D_SIMULATOR_LIBS = @V3D_SIMULATOR_LIBS@
VALGRIND_CFLAGS = @VALGRIND_CFLAGS@
VALGRIND_LIBS = @VALGRIND_LIBS@
VA_CFLAGS = @VA_CFLAGS@
VA_LIBS = @VA_LIBS@
VA_LIB_INSTALL_DIR = @VA_LIB_INSTALL_DIR@
VA_MAJOR = @VA_MAJOR@
VA_MINOR = @VA_MINOR@
VC4_CFLAGS = @VC4_CFLAGS@
VC4_LIBS = @VC4_LIBS@
VDPAU_CFLAGS = @VDPAU_CFLAGS@
VDPAU_LIBS = @VDPAU_LIBS@
VDPAU_LIB_INSTALL_DIR = @VDPAU_LIB_INSTALL_DIR@
VDPAU_MAJOR = @VDPAU_MAJOR@
VDPAU_MINOR = @VDPAU_MINOR@
VERSION = @VERSION@
VISIBILITY_CFLAGS = @VISIBILITY_CFLAGS@
VISIBILITY_CXXFLAGS = @VISIBILITY_CXXFLAGS@
VL_CFLAGS = @VL_CFLAGS@
VL_LIBS = @VL_LIBS@
VULKAN_ICD_INSTALL_DIR = @VULKAN_ICD_INSTALL_DIR@
WAYLAND_CLIENT_CFLAGS = @WAYLAND_CLIENT_CFLAGS@
WAYLAND_CLIENT_LIBS = @WAYLAND_CLIENT_LIBS@
WAYLAND_EGL_CFLAGS = @WAYLAND_EGL_CFLAGS@
WAYLAND_EGL_LIBS = @WAYLAND_EGL_LIBS@
WAYLAND_PROTOCOLS_CFLAGS = @WAYLAND_PROTOCOLS_CFLAGS@
WAYLAND_PROTOCOLS_DATADIR = @WAYLAND_PROTOCOLS_DATADIR@
WAYLAND_PROTOCOLS_LIBS = @WAYLAND_PROTOCOLS_LIBS@
WAYLAND_SCANNER = @WAYLAND_SCANNER@
WAYLAND_SCANNER_CFLAGS = @WAYLAND_SCANNER_CFLAGS@
WAYLAND_SCANNER_LIBS = @WAYLAND_SCANNER_LIBS@
WAYLAND_SERVER_CFLAGS = @WAYLAND_SERVER_CFLAGS@
WAYLAND_SERVER_LIBS = @WAYLAND_SERVER_LIBS@
WNO_OVERRIDE_INIT = @WNO_OVERRIDE_INIT@
X11_INCLUDES = @X11_INCLUDES@
XA_MAJOR = @XA_MAJOR@
XA_MINOR = @XA_MINOR@
XA_PATCH = @XA_PATCH@
XA_VERSION = @XA_VERSION@
XCB_DRI2_CFLAGS = @XCB_DRI2_CFLAGS@
XCB_DRI2_LIBS = @XCB_DRI2_LIBS@
XCB_DRI3_CFLAGS = @XCB_DRI3_CFLAGS@
XCB_DRI3_LIBS = @XCB_DRI3_LIBS@
XCB_DRI3_MODIFIERS_CFLAGS = @XCB_DRI3_MODIFIERS_CFLAGS@
XCB_DRI3_MODIFIERS_LIBS = @XCB_DRI3_MODIFIERS_LIBS@
XCB_RANDR_CFLAGS = @XCB_RANDR_CFLAGS@
XCB_RANDR_LIBS = @XCB_RANDR_LIBS@
XLIBGL_CFLAGS = @XLIBGL_CFLAGS@
XLIBGL_LIBS = @XLIBGL_LIBS@
XLIB_RANDR_CFLAGS = @XLIB_RANDR_CFLAGS@
XLIB_RANDR_LIBS = @XLIB_RANDR_LIBS@
XVMC_CFLAGS = @XVMC_CFLAGS@
XVMC_LIBS = @XVMC_LIBS@
XVMC_LIB_INSTALL_DIR = @XVMC_LIB_INSTALL_DIR@
XVMC_MAJOR = @XVMC_MAJOR@
XVMC_MINOR = @XVMC_MINOR@
YACC = @YACC@
YFLAGS = @YFLAGS@
ZLIB_CFLAGS = @ZLIB_CFLAGS@
ZLIB_LIBS = @ZLIB_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
acv_mako_found = @acv_mako_found@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
ax_pthread_config = @ax_pthread_config@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
ifGNUmake = @ifGNUmake@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AM_CPPFLAGS = \
	-I$(top_srcdir)/include \
	-I$(top_builddir)/src \
	-I$(top_srcdir)/src \
	-I$(top_builddir)/src/compiler/nir \
	-I$(top_srcdir)/src/broadcom/ \
	-I$(top_srcdir)/src/broadcom/cle \
	-I$(top_srcdir)/src/broadcom/include \
	-I$(top_srcdir)/src/gallium/auxiliary \
	-I$(top_srcdir)/src/gallium/include \
	$(VALGRIND_CFLAGS) \
	$(DEFINES)

AM_CFLAGS = $(EXPAT_CFLAGS) $(am__append_1)
BROADCOM_GENXML_GENERATED_FILES = \
	cle/v3d_packet_v21_pack.h \
	cle/v3d_packet_v33_pack.h \
	cle/v3d_packet_v41_pack.h \
	cle/v3d_packet_v42_pack.h \
	cle/v3d_xml.h \
	$()

BROADCOM_GENXML_XML_FILES = \
	cle/v3d_packet_v21.xml \
	cle/v3d_packet_v33.xml \
	$()

BROADCOM_FILES = \
	cle/v3d_packet_helpers.h \
	cle/v3dx_pack.h\
	clif/clif_dump.c \
	clif/clif_dump.h \
	clif/clif_private.h \
	common/v3d_debug.c \
	common/v3d_debug.h \
	common/v3d_device_info.h \
	common/v3d_macros.h \
	compiler/nir_to_vir.c \
	compiler/vir.c \
	compiler/vir_dump.c \
	compiler/vir_live_variables.c \
	compiler/vir_lower_uniforms.c \
	compiler/vir_opt_copy_propagate.c \
	compiler/vir_opt_dead_code.c \
	compiler/vir_opt_small_immediates.c \
	compiler/vir_register_allocate.c \
	compiler/vir_to_qpu.c \
	compiler/qpu_schedule.c \
	compiler/qpu_validate.c \
	compiler/v3d33_tex.c \
	compiler/v3d33_vpm_setup.c \
	compiler/v3d40_tex.c \
	compiler/v3d_compiler.h \
	compiler/v3d_nir_lower_io.c \
	compiler/v3d_nir_lower_txf_ms.c \
	qpu/qpu_disasm.c \
	qpu/qpu_disasm.h \
	qpu/qpu_instr.c \
	qpu/qpu_instr.h \
	qpu/qpu_pack.c \
	$()

BROADCOM_PER_VERSION_SOURCES = \
	clif/v3dx_dump.c \
	$()

BROADCOM_DECODER_FILES = \
	cle/v3d_decoder.c \
	cle/v3d_decoder.h \
	$()

lib_LTLIBRARIES = 
check_LTLIBRARIES = 
noinst_DATA = 
noinst_HEADERS = 
noinst_LTLIBRARIES = cle/libbroadcom_cle.la libbroadcom.la \
	libbroadcom_v33.la libbroadcom_v41.la libbroadcom_v42.la
TESTS = $(check_PROGRAMS)
BUILT_SOURCES = $(BROADCOM_GENXML_GENERATED_FILES)
CLEANFILES = $(BUILT_SOURCES)
EXTRA_DIST = $(BROADCOM_FILES) meson.build cle/meson.build \
	compiler/meson.build qpu/meson.build \
	$(BROADCOM_GENXML_XML_FILES) \
	$(BROADCOM_GENXML_GENERATED_FILES) cle/gen_pack_header.py $()
MKDIR_GEN = $(AM_V_at)$(MKDIR_P) $(@D)
PYTHON_GEN = $(AM_V_GEN)$(PYTHON) $(PYTHON_FLAGS)
SUFFIXES = _pack.h .xml
GEN_ZIPPED = $(srcdir)/../intel/genxml/gen_zipped_file.py
cle_libbroadcom_cle_la_CFLAGS = \
	-I$(top_builddir)/src/broadcom/cle	\
	$(AM_CFLAGS)

cle_libbroadcom_cle_la_SOURCES = $(BROADCOM_DECODER_FILES)
@USE_V3D_SIMULATOR_TRUE@libbroadcom_la_LDFLAGS = $(V3D_SIMULATOR_LIBS)
libbroadcom_v33_la_SOURCES = $(BROADCOM_PER_VERSION_SOURCES)
libbroadcom_v33_la_CFLAGS = -DV3D_VERSION=33
libbroadcom_v41_la_SOURCES = $(BROADCOM_PER_VERSION_SOURCES)
libbroadcom_v41_la_CFLAGS = -DV3D_VERSION=41
libbroadcom_v42_la_SOURCES = $(BROADCOM_PER_VERSION_SOURCES)
libbroadcom_v42_la_CFLAGS = -DV3D_VERSION=42
libbroadcom_la_SOURCES = $(BROADCOM_FILES)
LDADD = \
	libbroadcom.la \
	$(top_builddir)/src/compiler/nir/libnir.la \
	$(top_builddir)/src/util/libmesautil.la \
	$(NULL)

all: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) all-am

.SUFFIXES:
.SUFFIXES: _pack.h .xml .c .lo .log .o .obj .test .test$(EXEEXT) .trs
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(srcdir)/Makefile.sources $(srcdir)/Makefile.genxml.am $(srcdir)/Makefile.cle.am $(srcdir)/Makefile.v3d.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/broadcom/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign src/broadcom/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
	esac;
$(srcdir)/Makefile.sources $(srcdir)/Makefile.genxml.am $(srcdir)/Makefile.cle.am $(srcdir)/Makefile.v3d.am $(am__empty):

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

clean-checkPROGRAMS:
	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list

clean-noinstPROGRAMS:
	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list

clean-checkLTLIBRARIES:
	-test -z "$(check_LTLIBRARIES)" || rm -f $(check_LTLIBRARIES)
	@list='$(check_LTLIBRARIES)'; \
	locs=`for p in $$list; do echo $$p; done | \
	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
	      sort -u`; \
	test -z "$$locs" || { \
	  echo rm -f $${locs}; \
	  rm -f $${locs}; \
	}

install-libLTLIBRARIES: $(lib_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
	list2=; for p in $$list; do \
	  if test -f $$p; then \
	    list2="$$list2 $$p"; \
	  else :; fi; \
	done; \
	test -z "$$list2" || { \
	  echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
	}

uninstall-libLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
	done

clean-libLTLIBRARIES:
	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
	@list='$(lib_LTLIBRARIES)'; \
	locs=`for p in $$list; do echo $$p; done | \
	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
	      sort -u`; \
	test -z "$$locs" || { \
	  echo rm -f $${locs}; \
	  rm -f $${locs}; \
	}

clean-noinstLTLIBRARIES:
	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
	@list='$(noinst_LTLIBRARIES)'; \
	locs=`for p in $$list; do echo $$p; done | \
	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
	      sort -u`; \
	test -z "$$locs" || { \
	  echo rm -f $${locs}; \
	  rm -f $${locs}; \
	}
cle/$(am__dirstamp):
	@$(MKDIR_P) cle
	@: > cle/$(am__dirstamp)
cle/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) cle/$(DEPDIR)
	@: > cle/$(DEPDIR)/$(am__dirstamp)
cle/libbroadcom_cle_la-v3d_decoder.lo: cle/$(am__dirstamp) \
	cle/$(DEPDIR)/$(am__dirstamp)

cle/libbroadcom_cle.la: $(cle_libbroadcom_cle_la_OBJECTS) $(cle_libbroadcom_cle_la_DEPENDENCIES) $(EXTRA_cle_libbroadcom_cle_la_DEPENDENCIES) cle/$(am__dirstamp)
	$(AM_V_CCLD)$(cle_libbroadcom_cle_la_LINK)  $(cle_libbroadcom_cle_la_OBJECTS) $(cle_libbroadcom_cle_la_LIBADD) $(LIBS)
clif/$(am__dirstamp):
	@$(MKDIR_P) clif
	@: > clif/$(am__dirstamp)
clif/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) clif/$(DEPDIR)
	@: > clif/$(DEPDIR)/$(am__dirstamp)
clif/clif_dump.lo: clif/$(am__dirstamp) clif/$(DEPDIR)/$(am__dirstamp)
common/$(am__dirstamp):
	@$(MKDIR_P) common
	@: > common/$(am__dirstamp)
common/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) common/$(DEPDIR)
	@: > common/$(DEPDIR)/$(am__dirstamp)
common/v3d_debug.lo: common/$(am__dirstamp) \
	common/$(DEPDIR)/$(am__dirstamp)
compiler/$(am__dirstamp):
	@$(MKDIR_P) compiler
	@: > compiler/$(am__dirstamp)
compiler/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) compiler/$(DEPDIR)
	@: > compiler/$(DEPDIR)/$(am__dirstamp)
compiler/nir_to_vir.lo: compiler/$(am__dirstamp) \
	compiler/$(DEPDIR)/$(am__dirstamp)
compiler/vir.lo: compiler/$(am__dirstamp) \
	compiler/$(DEPDIR)/$(am__dirstamp)
compiler/vir_dump.lo: compiler/$(am__dirstamp) \
	compiler/$(DEPDIR)/$(am__dirstamp)
compiler/vir_live_variables.lo: compiler/$(am__dirstamp) \
	compiler/$(DEPDIR)/$(am__dirstamp)
compiler/vir_lower_uniforms.lo: compiler/$(am__dirstamp) \
	compiler/$(DEPDIR)/$(am__dirstamp)
compiler/vir_opt_copy_propagate.lo: compiler/$(am__dirstamp) \
	compiler/$(DEPDIR)/$(am__dirstamp)
compiler/vir_opt_dead_code.lo: compiler/$(am__dirstamp) \
	compiler/$(DEPDIR)/$(am__dirstamp)
compiler/vir_opt_small_immediates.lo: compiler/$(am__dirstamp) \
	compiler/$(DEPDIR)/$(am__dirstamp)
compiler/vir_register_allocate.lo: compiler/$(am__dirstamp) \
	compiler/$(DEPDIR)/$(am__dirstamp)
compiler/vir_to_qpu.lo: compiler/$(am__dirstamp) \
	compiler/$(DEPDIR)/$(am__dirstamp)
compiler/qpu_schedule.lo: compiler/$(am__dirstamp) \
	compiler/$(DEPDIR)/$(am__dirstamp)
compiler/qpu_validate.lo: compiler/$(am__dirstamp) \
	compiler/$(DEPDIR)/$(am__dirstamp)
compiler/v3d33_tex.lo: compiler/$(am__dirstamp) \
	compiler/$(DEPDIR)/$(am__dirstamp)
compiler/v3d33_vpm_setup.lo: compiler/$(am__dirstamp) \
	compiler/$(DEPDIR)/$(am__dirstamp)
compiler/v3d40_tex.lo: compiler/$(am__dirstamp) \
	compiler/$(DEPDIR)/$(am__dirstamp)
compiler/v3d_nir_lower_io.lo: compiler/$(am__dirstamp) \
	compiler/$(DEPDIR)/$(am__dirstamp)
compiler/v3d_nir_lower_txf_ms.lo: compiler/$(am__dirstamp) \
	compiler/$(DEPDIR)/$(am__dirstamp)
qpu/$(am__dirstamp):
	@$(MKDIR_P) qpu
	@: > qpu/$(am__dirstamp)
qpu/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) qpu/$(DEPDIR)
	@: > qpu/$(DEPDIR)/$(am__dirstamp)
qpu/qpu_disasm.lo: qpu/$(am__dirstamp) qpu/$(DEPDIR)/$(am__dirstamp)
qpu/qpu_instr.lo: qpu/$(am__dirstamp) qpu/$(DEPDIR)/$(am__dirstamp)
qpu/qpu_pack.lo: qpu/$(am__dirstamp) qpu/$(DEPDIR)/$(am__dirstamp)

libbroadcom.la: $(libbroadcom_la_OBJECTS) $(libbroadcom_la_DEPENDENCIES) $(EXTRA_libbroadcom_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(libbroadcom_la_LINK)  $(libbroadcom_la_OBJECTS) $(libbroadcom_la_LIBADD) $(LIBS)
clif/libbroadcom_v33_la-v3dx_dump.lo: clif/$(am__dirstamp) \
	clif/$(DEPDIR)/$(am__dirstamp)

libbroadcom_v33.la: $(libbroadcom_v33_la_OBJECTS) $(libbroadcom_v33_la_DEPENDENCIES) $(EXTRA_libbroadcom_v33_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(libbroadcom_v33_la_LINK)  $(libbroadcom_v33_la_OBJECTS) $(libbroadcom_v33_la_LIBADD) $(LIBS)
clif/libbroadcom_v41_la-v3dx_dump.lo: clif/$(am__dirstamp) \
	clif/$(DEPDIR)/$(am__dirstamp)

libbroadcom_v41.la: $(libbroadcom_v41_la_OBJECTS) $(libbroadcom_v41_la_DEPENDENCIES) $(EXTRA_libbroadcom_v41_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(libbroadcom_v41_la_LINK)  $(libbroadcom_v41_la_OBJECTS) $(libbroadcom_v41_la_LIBADD) $(LIBS)
clif/libbroadcom_v42_la-v3dx_dump.lo: clif/$(am__dirstamp) \
	clif/$(DEPDIR)/$(am__dirstamp)

libbroadcom_v42.la: $(libbroadcom_v42_la_OBJECTS) $(libbroadcom_v42_la_DEPENDENCIES) $(EXTRA_libbroadcom_v42_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(libbroadcom_v42_la_LINK)  $(libbroadcom_v42_la_OBJECTS) $(libbroadcom_v42_la_LIBADD) $(LIBS)
qpu/tests/$(am__dirstamp):
	@$(MKDIR_P) qpu/tests
	@: > qpu/tests/$(am__dirstamp)
qpu/tests/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) qpu/tests/$(DEPDIR)
	@: > qpu/tests/$(DEPDIR)/$(am__dirstamp)
qpu/tests/qpu_disasm.$(OBJEXT): qpu/tests/$(am__dirstamp) \
	qpu/tests/$(DEPDIR)/$(am__dirstamp)

qpu/tests/qpu_disasm$(EXEEXT): $(qpu_tests_qpu_disasm_OBJECTS) $(qpu_tests_qpu_disasm_DEPENDENCIES) $(EXTRA_qpu_tests_qpu_disasm_DEPENDENCIES) qpu/tests/$(am__dirstamp)
	@rm -f qpu/tests/qpu_disasm$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(qpu_tests_qpu_disasm_OBJECTS) $(qpu_tests_qpu_disasm_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)
	-rm -f cle/*.$(OBJEXT)
	-rm -f cle/*.lo
	-rm -f clif/*.$(OBJEXT)
	-rm -f clif/*.lo
	-rm -f common/*.$(OBJEXT)
	-rm -f common/*.lo
	-rm -f compiler/*.$(OBJEXT)
	-rm -f compiler/*.lo
	-rm -f qpu/*.$(OBJEXT)
	-rm -f qpu/*.lo
	-rm -f qpu/tests/*.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@cle/$(DEPDIR)/libbroadcom_cle_la-v3d_decoder.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@clif/$(DEPDIR)/clif_dump.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@clif/$(DEPDIR)/libbroadcom_v33_la-v3dx_dump.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@clif/$(DEPDIR)/libbroadcom_v41_la-v3dx_dump.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@clif/$(DEPDIR)/libbroadcom_v42_la-v3dx_dump.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@common/$(DEPDIR)/v3d_debug.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@compiler/$(DEPDIR)/nir_to_vir.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@compiler/$(DEPDIR)/qpu_schedule.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@compiler/$(DEPDIR)/qpu_validate.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@compiler/$(DEPDIR)/v3d33_tex.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@compiler/$(DEPDIR)/v3d33_vpm_setup.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@compiler/$(DEPDIR)/v3d40_tex.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@compiler/$(DEPDIR)/v3d_nir_lower_io.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@compiler/$(DEPDIR)/v3d_nir_lower_txf_ms.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@compiler/$(DEPDIR)/vir.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@compiler/$(DEPDIR)/vir_dump.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@compiler/$(DEPDIR)/vir_live_variables.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@compiler/$(DEPDIR)/vir_lower_uniforms.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@compiler/$(DEPDIR)/vir_opt_copy_propagate.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@compiler/$(DEPDIR)/vir_opt_dead_code.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@compiler/$(DEPDIR)/vir_opt_small_immediates.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@compiler/$(DEPDIR)/vir_register_allocate.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@compiler/$(DEPDIR)/vir_to_qpu.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@qpu/$(DEPDIR)/qpu_disasm.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@qpu/$(DEPDIR)/qpu_instr.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@qpu/$(DEPDIR)/qpu_pack.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@qpu/tests/$(DEPDIR)/qpu_disasm.Po@am__quote@ # am--include-marker

$(am__depfiles_remade):
	@$(MKDIR_P) $(@D)
	@echo '# dummy' >$@-t && $(am__mv) $@-t $@

am--depfiles: $(am__depfiles_remade)

.c.o:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<

.c.obj:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.c.lo:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<

cle/libbroadcom_cle_la-v3d_decoder.lo: cle/v3d_decoder.c
@am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(cle_libbroadcom_cle_la_CFLAGS) $(CFLAGS) -MT cle/libbroadcom_cle_la-v3d_decoder.lo -MD -MP -MF cle/$(DEPDIR)/libbroadcom_cle_la-v3d_decoder.Tpo -c -o cle/libbroadcom_cle_la-v3d_decoder.lo `test -f 'cle/v3d_decoder.c' || echo '$(srcdir)/'`cle/v3d_decoder.c
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) cle/$(DEPDIR)/libbroadcom_cle_la-v3d_decoder.Tpo cle/$(DEPDIR)/libbroadcom_cle_la-v3d_decoder.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='cle/v3d_decoder.c' object='cle/libbroadcom_cle_la-v3d_decoder.lo' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(cle_libbroadcom_cle_la_CFLAGS) $(CFLAGS) -c -o cle/libbroadcom_cle_la-v3d_decoder.lo `test -f 'cle/v3d_decoder.c' || echo '$(srcdir)/'`cle/v3d_decoder.c

clif/libbroadcom_v33_la-v3dx_dump.lo: clif/v3dx_dump.c
@am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbroadcom_v33_la_CFLAGS) $(CFLAGS) -MT clif/libbroadcom_v33_la-v3dx_dump.lo -MD -MP -MF clif/$(DEPDIR)/libbroadcom_v33_la-v3dx_dump.Tpo -c -o clif/libbroadcom_v33_la-v3dx_dump.lo `test -f 'clif/v3dx_dump.c' || echo '$(srcdir)/'`clif/v3dx_dump.c
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) clif/$(DEPDIR)/libbroadcom_v33_la-v3dx_dump.Tpo clif/$(DEPDIR)/libbroadcom_v33_la-v3dx_dump.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='clif/v3dx_dump.c' object='clif/libbroadcom_v33_la-v3dx_dump.lo' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbroadcom_v33_la_CFLAGS) $(CFLAGS) -c -o clif/libbroadcom_v33_la-v3dx_dump.lo `test -f 'clif/v3dx_dump.c' || echo '$(srcdir)/'`clif/v3dx_dump.c

clif/libbroadcom_v41_la-v3dx_dump.lo: clif/v3dx_dump.c
@am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbroadcom_v41_la_CFLAGS) $(CFLAGS) -MT clif/libbroadcom_v41_la-v3dx_dump.lo -MD -MP -MF clif/$(DEPDIR)/libbroadcom_v41_la-v3dx_dump.Tpo -c -o clif/libbroadcom_v41_la-v3dx_dump.lo `test -f 'clif/v3dx_dump.c' || echo '$(srcdir)/'`clif/v3dx_dump.c
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) clif/$(DEPDIR)/libbroadcom_v41_la-v3dx_dump.Tpo clif/$(DEPDIR)/libbroadcom_v41_la-v3dx_dump.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='clif/v3dx_dump.c' object='clif/libbroadcom_v41_la-v3dx_dump.lo' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbroadcom_v41_la_CFLAGS) $(CFLAGS) -c -o clif/libbroadcom_v41_la-v3dx_dump.lo `test -f 'clif/v3dx_dump.c' || echo '$(srcdir)/'`clif/v3dx_dump.c

clif/libbroadcom_v42_la-v3dx_dump.lo: clif/v3dx_dump.c
@am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbroadcom_v42_la_CFLAGS) $(CFLAGS) -MT clif/libbroadcom_v42_la-v3dx_dump.lo -MD -MP -MF clif/$(DEPDIR)/libbroadcom_v42_la-v3dx_dump.Tpo -c -o clif/libbroadcom_v42_la-v3dx_dump.lo `test -f 'clif/v3dx_dump.c' || echo '$(srcdir)/'`clif/v3dx_dump.c
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) clif/$(DEPDIR)/libbroadcom_v42_la-v3dx_dump.Tpo clif/$(DEPDIR)/libbroadcom_v42_la-v3dx_dump.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='clif/v3dx_dump.c' object='clif/libbroadcom_v42_la-v3dx_dump.lo' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbroadcom_v42_la_CFLAGS) $(CFLAGS) -c -o clif/libbroadcom_v42_la-v3dx_dump.lo `test -f 'clif/v3dx_dump.c' || echo '$(srcdir)/'`clif/v3dx_dump.c

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
	-rm -rf cle/.libs cle/_libs
	-rm -rf clif/.libs clif/_libs
	-rm -rf common/.libs common/_libs
	-rm -rf compiler/.libs compiler/_libs
	-rm -rf qpu/.libs qpu/_libs
	-rm -rf qpu/tests/.libs qpu/tests/_libs

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-am

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-am

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

# Recover from deleted '.trs' file; this should ensure that
# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
# to avoid problems with "make -n".
.log.trs:
	rm -f $< $@
	$(MAKE) $(AM_MAKEFLAGS) $<

# Leading 'am--fnord' is there to ensure the list of targets does not
# expand to empty, as could happen e.g. with make check TESTS=''.
am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
am--force-recheck:
	@:

$(TEST_SUITE_LOG): $(TEST_LOGS)
	@$(am__set_TESTS_bases); \
	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
	redo_bases=`for i in $$bases; do \
	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
	            done`; \
	if test -n "$$redo_bases"; then \
	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
	  if $(am__make_dryrun); then :; else \
	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
	  fi; \
	fi; \
	if test -n "$$am__remaking_logs"; then \
	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
	       "recursion detected" >&2; \
	elif test -n "$$redo_logs"; then \
	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
	fi; \
	if $(am__make_dryrun); then :; else \
	  st=0;  \
	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
	  for i in $$redo_bases; do \
	    test -f $$i.trs && test -r $$i.trs \
	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
	    test -f $$i.log && test -r $$i.log \
	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
	  done; \
	  test $$st -eq 0 || exit 1; \
	fi
	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
	ws='[ 	]'; \
	results=`for b in $$bases; do echo $$b.trs; done`; \
	test -n "$$results" || results=/dev/null; \
	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
	  success=true; \
	else \
	  success=false; \
	fi; \
	br='==================='; br=$$br$$br$$br$$br; \
	result_count () \
	{ \
	    if test x"$$1" = x"--maybe-color"; then \
	      maybe_colorize=yes; \
	    elif test x"$$1" = x"--no-color"; then \
	      maybe_colorize=no; \
	    else \
	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
	    fi; \
	    shift; \
	    desc=$$1 count=$$2; \
	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
	      color_start=$$3 color_end=$$std; \
	    else \
	      color_start= color_end=; \
	    fi; \
	    echo "$${color_start}# $$desc $$count$${color_end}"; \
	}; \
	create_testsuite_report () \
	{ \
	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
	  result_count $$1 "PASS: " $$pass  "$$grn"; \
	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
	  result_count $$1 "FAIL: " $$fail  "$$red"; \
	  result_count $$1 "XPASS:" $$xpass "$$red"; \
	  result_count $$1 "ERROR:" $$error "$$mgn"; \
	}; \
	{								\
	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
	    $(am__rst_title);						\
	  create_testsuite_report --no-color;				\
	  echo;								\
	  echo ".. contents:: :depth: 2";				\
	  echo;								\
	  for b in $$bases; do echo $$b; done				\
	    | $(am__create_global_log);					\
	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
	if $$success; then						\
	  col="$$grn";							\
	 else								\
	  col="$$red";							\
	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
	fi;								\
	echo "$${col}$$br$${std}"; 					\
	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
	echo "$${col}$$br$${std}"; 					\
	create_testsuite_report --maybe-color;				\
	echo "$$col$$br$$std";						\
	if $$success; then :; else					\
	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
	  fi;								\
	  echo "$$col$$br$$std";					\
	fi;								\
	$$success || exit 1

check-TESTS: $(check_PROGRAMS) $(check_LTLIBRARIES)
	@list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
	@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	trs_list=`for i in $$bases; do echo $$i.trs; done`; \
	log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
	exit $$?;
recheck: all $(check_PROGRAMS) $(check_LTLIBRARIES)
	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	bases=`for i in $$bases; do echo $$i; done \
	         | $(am__list_recheck_tests)` || exit 1; \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	log_list=`echo $$log_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
	        am__force_recheck=am--force-recheck \
	        TEST_LOGS="$$log_list"; \
	exit $$?
qpu/tests/qpu_disasm.log: qpu/tests/qpu_disasm$(EXEEXT)
	@p='qpu/tests/qpu_disasm$(EXEEXT)'; \
	b='qpu/tests/qpu_disasm'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
.test.log:
	@p='$<'; \
	$(am__set_b); \
	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
@am__EXEEXT_TRUE@.test$(EXEEXT).log:
@am__EXEEXT_TRUE@	@p='$<'; \
@am__EXEEXT_TRUE@	$(am__set_b); \
@am__EXEEXT_TRUE@	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)

distdir: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_LTLIBRARIES)
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-am
all-am: Makefile $(PROGRAMS) $(LTLIBRARIES) $(DATA) $(HEADERS)
installdirs:
	for dir in "$(DESTDIR)$(libdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:
	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-rm -f cle/$(DEPDIR)/$(am__dirstamp)
	-rm -f cle/$(am__dirstamp)
	-rm -f clif/$(DEPDIR)/$(am__dirstamp)
	-rm -f clif/$(am__dirstamp)
	-rm -f common/$(DEPDIR)/$(am__dirstamp)
	-rm -f common/$(am__dirstamp)
	-rm -f compiler/$(DEPDIR)/$(am__dirstamp)
	-rm -f compiler/$(am__dirstamp)
	-rm -f qpu/$(DEPDIR)/$(am__dirstamp)
	-rm -f qpu/$(am__dirstamp)
	-rm -f qpu/tests/$(DEPDIR)/$(am__dirstamp)
	-rm -f qpu/tests/$(am__dirstamp)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-am

clean-am: clean-checkLTLIBRARIES clean-checkPROGRAMS clean-generic \
	clean-libLTLIBRARIES clean-libtool clean-noinstLTLIBRARIES \
	clean-noinstPROGRAMS mostlyclean-am

distclean: distclean-am
		-rm -f cle/$(DEPDIR)/libbroadcom_cle_la-v3d_decoder.Plo
	-rm -f clif/$(DEPDIR)/clif_dump.Plo
	-rm -f clif/$(DEPDIR)/libbroadcom_v33_la-v3dx_dump.Plo
	-rm -f clif/$(DEPDIR)/libbroadcom_v41_la-v3dx_dump.Plo
	-rm -f clif/$(DEPDIR)/libbroadcom_v42_la-v3dx_dump.Plo
	-rm -f common/$(DEPDIR)/v3d_debug.Plo
	-rm -f compiler/$(DEPDIR)/nir_to_vir.Plo
	-rm -f compiler/$(DEPDIR)/qpu_schedule.Plo
	-rm -f compiler/$(DEPDIR)/qpu_validate.Plo
	-rm -f compiler/$(DEPDIR)/v3d33_tex.Plo
	-rm -f compiler/$(DEPDIR)/v3d33_vpm_setup.Plo
	-rm -f compiler/$(DEPDIR)/v3d40_tex.Plo
	-rm -f compiler/$(DEPDIR)/v3d_nir_lower_io.Plo
	-rm -f compiler/$(DEPDIR)/v3d_nir_lower_txf_ms.Plo
	-rm -f compiler/$(DEPDIR)/vir.Plo
	-rm -f compiler/$(DEPDIR)/vir_dump.Plo
	-rm -f compiler/$(DEPDIR)/vir_live_variables.Plo
	-rm -f compiler/$(DEPDIR)/vir_lower_uniforms.Plo
	-rm -f compiler/$(DEPDIR)/vir_opt_copy_propagate.Plo
	-rm -f compiler/$(DEPDIR)/vir_opt_dead_code.Plo
	-rm -f compiler/$(DEPDIR)/vir_opt_small_immediates.Plo
	-rm -f compiler/$(DEPDIR)/vir_register_allocate.Plo
	-rm -f compiler/$(DEPDIR)/vir_to_qpu.Plo
	-rm -f qpu/$(DEPDIR)/qpu_disasm.Plo
	-rm -f qpu/$(DEPDIR)/qpu_instr.Plo
	-rm -f qpu/$(DEPDIR)/qpu_pack.Plo
	-rm -f qpu/tests/$(DEPDIR)/qpu_disasm.Po
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-tags

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am:

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am: install-libLTLIBRARIES

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
		-rm -f cle/$(DEPDIR)/libbroadcom_cle_la-v3d_decoder.Plo
	-rm -f clif/$(DEPDIR)/clif_dump.Plo
	-rm -f clif/$(DEPDIR)/libbroadcom_v33_la-v3dx_dump.Plo
	-rm -f clif/$(DEPDIR)/libbroadcom_v41_la-v3dx_dump.Plo
	-rm -f clif/$(DEPDIR)/libbroadcom_v42_la-v3dx_dump.Plo
	-rm -f common/$(DEPDIR)/v3d_debug.Plo
	-rm -f compiler/$(DEPDIR)/nir_to_vir.Plo
	-rm -f compiler/$(DEPDIR)/qpu_schedule.Plo
	-rm -f compiler/$(DEPDIR)/qpu_validate.Plo
	-rm -f compiler/$(DEPDIR)/v3d33_tex.Plo
	-rm -f compiler/$(DEPDIR)/v3d33_vpm_setup.Plo
	-rm -f compiler/$(DEPDIR)/v3d40_tex.Plo
	-rm -f compiler/$(DEPDIR)/v3d_nir_lower_io.Plo
	-rm -f compiler/$(DEPDIR)/v3d_nir_lower_txf_ms.Plo
	-rm -f compiler/$(DEPDIR)/vir.Plo
	-rm -f compiler/$(DEPDIR)/vir_dump.Plo
	-rm -f compiler/$(DEPDIR)/vir_live_variables.Plo
	-rm -f compiler/$(DEPDIR)/vir_lower_uniforms.Plo
	-rm -f compiler/$(DEPDIR)/vir_opt_copy_propagate.Plo
	-rm -f compiler/$(DEPDIR)/vir_opt_dead_code.Plo
	-rm -f compiler/$(DEPDIR)/vir_opt_small_immediates.Plo
	-rm -f compiler/$(DEPDIR)/vir_register_allocate.Plo
	-rm -f compiler/$(DEPDIR)/vir_to_qpu.Plo
	-rm -f qpu/$(DEPDIR)/qpu_disasm.Plo
	-rm -f qpu/$(DEPDIR)/qpu_instr.Plo
	-rm -f qpu/$(DEPDIR)/qpu_pack.Plo
	-rm -f qpu/tests/$(DEPDIR)/qpu_disasm.Po
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-libLTLIBRARIES

.MAKE: all check check-am install install-am install-strip

.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-TESTS \
	check-am clean clean-checkLTLIBRARIES clean-checkPROGRAMS \
	clean-generic clean-libLTLIBRARIES clean-libtool \
	clean-noinstLTLIBRARIES clean-noinstPROGRAMS cscopelist-am \
	ctags ctags-am distclean distclean-compile distclean-generic \
	distclean-libtool distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-libLTLIBRARIES install-man install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	recheck tags tags-am uninstall uninstall-am \
	uninstall-libLTLIBRARIES

.PRECIOUS: Makefile


$(BROADCOM_GENXML_GENERATED_FILES): cle/gen_pack_header.py

cle/v3d_packet_v21_pack.h: $(srcdir)/cle/v3d_packet_v21.xml $(srcdir)/cle/gen_pack_header.py
	$(MKDIR_GEN)
	$(PYTHON_GEN) $(srcdir)/cle/gen_pack_header.py $< 21 > $@ || ($(RM) $@; false)

cle/v3d_packet_v33_pack.h: $(srcdir)/cle/v3d_packet_v33.xml $(srcdir)/cle/gen_pack_header.py
	$(MKDIR_GEN)
	$(PYTHON_GEN) $(srcdir)/cle/gen_pack_header.py $< 33 > $@ || ($(RM) $@; false)

cle/v3d_packet_v41_pack.h: $(srcdir)/cle/v3d_packet_v33.xml $(srcdir)/cle/gen_pack_header.py
	$(MKDIR_GEN)
	$(PYTHON_GEN) $(srcdir)/cle/gen_pack_header.py $< 41 > $@ || ($(RM) $@; false)

cle/v3d_packet_v42_pack.h: $(srcdir)/cle/v3d_packet_v33.xml $(srcdir)/cle/gen_pack_header.py
	$(MKDIR_GEN)
	$(PYTHON_GEN) $(srcdir)/cle/gen_pack_header.py $< 42 > $@ || ($(RM) $@; false)
cle/v3d_xml.h: $(GEN_ZIPPED) $(BROADCOM_GENXML_XML_FILES)
	$(MKDIR_GEN)
	$(PYTHON_GEN) $(GEN_ZIPPED) $(BROADCOM_GENXML_XML_FILES:%=$(srcdir)/%) > $@ || ($(RM) $@; false)

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
