                         ----------------------
                                HAProxy
                          Configuration Manual
                         ----------------------
                              version 3.2
                              2026/02/19


This document covers the configuration language as implemented in the version
specified above. It does not provide any hints, examples, or advice. For such
documentation, please refer to the Reference Manual or the Architecture Manual.
The summary below is meant to help you find sections by name and navigate
through the document.

Note to documentation contributors :
    This document is formatted with 80 columns per line, with even number of
    spaces for indentation and without tabs. Please follow these rules strictly
    so that it remains easily printable everywhere. If a line needs to be
    printed verbatim and does not fit, please end each line with a backslash
    ('\') and continue on next line, indented by two characters. It is also
    sometimes useful to prefix all output lines (logs, console outputs) with 3
    closing angle brackets ('>>>') in order to emphasize the difference between
    inputs and outputs when they may be ambiguous. If you add sections,
    please update the summary below for easier searching.


Summary
-------

1.    Quick reminder about HTTP
1.1.      The HTTP transaction model
1.2.      Terminology
1.3.      HTTP request
1.3.1.        The request line
1.3.2.        The request headers
1.4.      HTTP response
1.4.1.        The response line
1.4.2.        The response headers

2.    Configuring HAProxy
2.1.      Configuration file format
2.2.      Quoting and escaping
2.3.      Environment variables
2.4.      Conditional blocks
2.5.      Time format
2.6.      Size format
2.7.      Name format for maps and ACLs
2.8.      Variables
2.9.      Address formats
2.9.1.        Address family prefixes
2.9.2.        Socket type prefixes
2.9.3.        Protocol prefixes
2.10.     Examples

3.    Global section
3.1.      Process management and security
3.2.      Performance tuning
3.3.      Debugging
3.4.      HTTPClient tuning

4.    Proxies
4.1.      Proxy keywords matrix
4.2.      Alphabetically sorted keywords reference
4.3.      Actions keywords matrix
4.4.      Alphabetically sorted actions reference

5.    Bind and server options
5.1.      Bind options
5.2.      Server and default-server options
5.3.      Server DNS resolution
5.3.1.      Global overview
5.3.2.      The resolvers section

6.    Cache
6.1.      Limitation
6.2.      Setup
6.2.1.        Cache section
6.2.2.        Proxy section

7.    Using ACLs and fetching samples
7.1.      ACL basics
7.1.1.      Matching booleans
7.1.2.      Matching integers
7.1.3.      Matching strings
7.1.4.      Matching regular expressions (regexes)
7.1.5.      Matching arbitrary data blocks
7.1.6.      Matching IPv4 and IPv6 addresses
7.2.      Using ACLs to form conditions
7.3.      Fetching samples
7.3.1.        Converters
7.3.2.        Fetching samples from internal states
7.3.3.        Fetching samples at Layer 4
7.3.4.        Fetching samples at Layer 5
7.3.5.        Fetching samples from buffer contents (Layer 6)
7.3.6.        Fetching HTTP samples (Layer 7)
7.3.7.        Fetching samples for developers
7.4.      Pre-defined ACLs

8.    Logging
8.1.      Log levels
8.2.      Log formats
8.2.1.        Default log format
8.2.2.        TCP log format
8.2.3.        HTTP log format
8.2.4.        HTTPS log format
8.2.5.        Error log format
8.2.6.        Custom log format
8.3.      Advanced logging options
8.3.1.        Disabling logging of external tests
8.3.2.        Logging before waiting for the stream to terminate
8.3.3.        Raising log level upon errors
8.3.4.        Disabling logging of successful connections
8.3.5.        Log profiles
8.4.      Timing events
8.5.      Stream state at disconnection
8.6.      Non-printable characters
8.7.      Capturing HTTP cookies
8.8.      Capturing HTTP headers
8.9.      Examples of logs

9.    Supported filters
9.1.      Trace
9.2.      HTTP compression
9.3.      Stream Processing Offload Engine (SPOE)
9.4.      Cache
9.5.      fcgi-app
9.6.      OpenTracing
9.7.      Bandwidth limitation

10.   FastCGI applications
10.1.     Setup
10.1.1.       Fcgi-app section
10.1.2.       Proxy section
10.1.3.       Example
10.2.     Default parameters
10.3.     Limitations

11.   Stick-tables and Peers
11.1.     Stick-tables declaration
11.2.     Peers declaration

12.   Other sections
12.1.     Traces
12.2.     Userlists
12.3.     Mailers
12.4.     HTTP-errors
12.5.     Rings
12.6.     Log forwarding
12.7.     Certificate Storage
12.7.1.      Load options
12.8.     ACME
12.9.     Programs (deprecated)


1. Quick reminder about HTTP
----------------------------

When HAProxy is running in HTTP mode, both the request and the response are
fully analyzed and indexed, thus it becomes possible to build matching criteria
on almost anything found in the contents.

However, it is important to understand how HTTP requests and responses are
formed, and how HAProxy decomposes them. It will then become easier to write
correct rules and to debug existing configurations.

First, HTTP is standardized by a series of RFC that HAProxy follows as closely
as possible:
  - RFC 9110: HTTP Semantics (explains the meaning of protocol elements)
  - RFC 9111: HTTP Caching (explains the rules to follow for an HTTP cache)
  - RFC 9112: HTTP/1.1 (representation, interoperability rules, security)
  - RFC 9113: HTTP/2   (representation, interoperability rules, security)
  - RFC 9114: HTTP/3   (representation, interoperability rules, security)

In addition to these, RFC 8999 to 9002 specify the QUIC transport layer used by
the HTTP/3 protocol.


1.1. The HTTP transaction model
-------------------------------

The HTTP protocol is transaction-driven. This means that each request will lead
to one and only one response. Originally, with version 1.0 of the protocol,
there was a single request per connection: a TCP connection is established from
the client to the server, a request is sent by the client over the connection,
the server responds, and the connection is closed. A new request then involves
a new connection :

  [CON1] [REQ1] ... [RESP1] [CLO1] [CON2] [REQ2] ... [RESP2] [CLO2] ...

In this mode, often called the "HTTP close" mode, there are as many connection
establishments as there are HTTP transactions. Since the connection is closed
by the server after the response, the client does not need to know the content
length, it considers that the response is complete when the connection closes.
This also means that if some responses are truncated due to network errors, the
client could mistakenly think a response was complete, and this used to cause
truncated images to be rendered on screen sometimes.

Due to the transactional nature of the protocol, it was possible to improve it
to avoid closing a connection between two subsequent transactions. In this mode
however, it is mandatory that the server indicates the content length for each
response so that the client does not wait indefinitely. For this, a special
header is used: "Content-length". This mode is called the "keep-alive" mode,
and arrived with HTTP/1.1 (some HTTP/1.0 agents support it), and connections
that are reused between requests are called "persistent connections":

  [CON] [REQ1] ... [RESP1] [REQ2] ... [RESP2] [CLO] ...

Its advantages are a reduced latency between transactions, less processing
power required on the server side, and the ability to detect a truncated
response. It is generally faster than the close mode, but not always because
some clients often limit their concurrent connections to a smaller value, and
this compensates less for poor network connectivity. Also, some servers have to
keep the connection alive for a long time waiting for a possible new request
and may experience a high memory usage due to the high number of connections,
and closing too fast may break some requests that arrived at the moment the
connection was closed.

In this mode, the response size needs to be known upfront so that's not always
possible with dynamically generated or compressed contents. For this reason
another mode was implemented, the "chunked mode", where instead of announcing
the size of the whole size at once, the sender only advertises the size of the
next "chunk" of response it already has in a buffer, and can terminate at any
moment with a zero-sized chunk. In this mode, the Content-Length header is not
used.

Another improvement in the communications is the pipelining mode. It still uses
keep-alive, but the client does not wait for the first response to send the
second request. This is useful for fetching large number of images composing a
page :

  [CON] [REQ1] [REQ2] ... [RESP1] [RESP2] [CLO] ...

This can obviously have a tremendous benefit on performance because the network
latency is eliminated between subsequent requests. Many HTTP agents do not
correctly support pipelining since there is no way to associate a response with
the corresponding request in HTTP. For this reason, it is mandatory for the
server to reply in the exact same order as the requests were received. In
practice, after several attempts by various clients to deploy it, it has been
totally abandoned for its lack of reliability on certain servers. But it is
mandatory for servers to support it.

The next improvement is the multiplexed mode, as implemented in HTTP/2 and
HTTP/3. In this mode, multiple transactions (i.e. request-response pairs) are
transmitted in parallel over a single connection, and they all progress at
their own speed, independent from each other. With multiplexed protocols, a new
notion of "stream" was introduced, to represent these parallel communications
happening over the same connection. Each stream is generally assigned a unique
identifier for a given connection, that is used by both endpoints to know where
to deliver the data. It is fairly common for clients to start many (up to 100,
sometimes more) streams in parallel over a same connection, and let the server
sort them out and respond in any order depending on what response is available.
The main benefit of the multiplexed mode is that it significantly reduces the
number of round trips, and speeds up page loading time over high latency
networks. It is sometimes visible on sites using many images, where all images
appear to load in parallel.

These protocols have also improved their efficiency by adopting some mechanisms
to compress header fields in order to reduce the number of bytes on the wire,
so that without the appropriate tools, they are not realistically manipulable
by hand nor readable to the naked eye like HTTP/1 was. For this reason, various
examples of HTTP messages continue to be represented in literature (including
this document) using the HTTP/1 syntax even for newer versions of the protocol.

HTTP/2 suffers from some design limitations, such as packet losses affecting
all streams at once, and if a client takes too much time to retrieve an object
(e.g. needs to store it on disk), it may slow down its retrieval and make it
impossible during this time to access the data that is pending behind it. This
is called "head of line blocking" or "HoL blocking" or sometimes just "HoL".

HTTP/3 is implemented over QUIC, itself implemented over UDP. QUIC solves the
head of line blocking at the transport level by means of independently handled
streams. Indeed, when experiencing loss, an impacted stream does not affect the
other streams, and all of them can be accessed in parallel. QUIC also provides
connection migration support but currently haproxy does not support it.

By default HAProxy operates in keep-alive mode with regards to persistent
connections: for each connection it processes each request and response, and
leaves the connection idle on both sides between the end of a response and the
start of a new request. When it receives HTTP/2 connections from a client, it
processes all the requests in parallel and leaves the connection idling,
waiting for new requests, just as if it was a keep-alive HTTP connection.

HAProxy essentially supports 3 connection modes :
  - keep alive    : all requests and responses are processed, and the client
                    facing and server facing connections are kept alive for new
                    requests. This is the default and suits the modern web and
                    modern protocols (HTTP/2 and HTTP/3).

  - server close  : the server-facing connection is closed after the response.

  - close         : the connection is actively closed after end of response on
                    both sides.

In addition to this, by default, the server-facing connection is reusable by
any request from any client, as mandated by the HTTP protocol specification, so
any information pertaining to a specific client has to be passed along with
each request if needed (e.g. client's source address etc). When HTTP/2 is used
with a server, by default HAProxy will dedicate this connection to the same
client to avoid the risk of head of line blocking between clients.


1.2. Terminology
----------------

Inside HAProxy, the terminology has evolved a bit over the ages to follow the
evolutions of the HTTP protocol and its usages. While originally there was no
significant difference between a connection, a session, a stream or a
transaction, these ones clarified over time to match closely what exists in the
modern versions of the HTTP protocol, though some terms remain visible in the
configuration or the command line interface for the purpose of historical
compatibility.

Here are some definitions that apply to the current version of HAProxy:

  - connection: a connection is a single, bidiractional communication channel
    between a remote agent (client or server) and haproxy, at the lowest level
    possible. Usually it corresponds to a TCP socket established between a pair
    of IP and ports. On the client-facing side, connections are the very first
    entities that are instantiated when a client connects to haproxy, and rules
    applying at the connection level are the earliest ones that apply.

  - session: a session adds some context information associated with a
    connection. This includes and information specific to the transport layer
    (e.g. TLS keys etc), or variables. This term has long been used inside
    HAProxy to denote end-to-end HTTP/1.0 communications between two ends, and
    as such it remains visible in the name of certain CLI commands or
    statistics, despite representing streams nowadays, but the help messages
    and descriptions try to make this unambiguous. It is still valid when it
    comes to network-level terminology (e.g. TCP sessions inside the operating
    systems, or TCP sessions across a firewall), or for non-HTTP user-level
    applications (e.g. a telnet session or an SSH session). It must not be
    confused with "application sessions" that are used to store a full user
    context in a cookie and require to be sent to the same server.

  - stream: a stream exactly corresponds to an end-to-end bidirectional
    communication at the application level, where analysis and transformations
    may be applied. In HTTP, it contains a single request and its associated
    response, and is instantiated by the arrival of the request and is finished
    with the end of delivery of the response. In this context there is a 1:1
    relation between such a stream and the stream of a multiplexed protocol. In
    TCP communications there is a single stream per connection.

  - transaction: a transaction is only a pair of a request and the associated
    response. The term was used in conjunction with sessions before the streams
    but nowadays there is a 1:1 relation between a transaction and a stream. It
    is essentially visible in the variables' scope "txn" which is valid during
    the whole transaction, hence the stream.

  - request: it designates the traffic flowing from the client to the server.
    It is mainly used for HTTP to indicate where operations are performed. This
    term also exists for TCP operations to indicate where data are processed.
    Requests often appear in counters as a unit of traffic or activity. They do
    not always imply a response (e.g. due to errors), but since there is no
    spontaneous responses without requests, requests remain a relevant metric
    of the overall activity. In TCP there are as many requests as connections.

  - response: this designates the traffic flowing from the server to the
    client, or sometimes from HAProxy to the client, when HAProxy produces the
    response itself (e.g. an HTTP redirect).

  - service: this generally indicates some internal processing in HAProxy that
    does not require a server, such as the stats page, the cache, or some Lua
    code to implement a small application. A service usually reads a request,
    performs some operations and produces a response.


1.3. HTTP request
-----------------

First, let's consider this HTTP request :

  Line     Contents
  number
     1     GET /serv/login.php?lang=en&profile=2 HTTP/1.1
     2     Host: www.mydomain.com
     3     User-agent: my small browser
     4     Accept: image/jpeg, image/gif
     5     Accept: image/png


1.3.1. The Request line
-----------------------

Line 1 is the "request line". It is always composed of 3 fields :

  - a METHOD      : GET
  - a URI         : /serv/login.php?lang=en&profile=2
  - a version tag : HTTP/1.1

All of them are delimited by what the standard calls LWS (linear white spaces),
which are commonly spaces, but can also be tabs or line feeds/carriage returns
followed by spaces/tabs. The method itself cannot contain any colon (':') and
is limited to alphabetic letters. All those various combinations make it
desirable that HAProxy performs the splitting itself rather than leaving it to
the user to write a complex or inaccurate regular expression.

The URI itself can have several forms :

  - A "relative URI" :

      /serv/login.php?lang=en&profile=2

    It is a complete URL without the host part. This is generally what is
    received by servers, reverse proxies and transparent proxies.

  - An "absolute URI", also called a "URL" :

      http://192.168.0.12:8080/serv/login.php?lang=en&profile=2

    It is composed of a "scheme" (the protocol name followed by '://'), a host
    name or address, optionally a colon (':') followed by a port number, then
    a relative URI beginning at the first slash ('/') after the address part.
    This is generally what proxies receive, but a server supporting HTTP/1.1
    must accept this form too.

  - a star ('*') : this form is only accepted in association with the OPTIONS
    method and is not relayable. It is used to inquiry a next hop's
    capabilities.

  - an address:port combination : 192.168.0.12:80
    This is used with the CONNECT method, which is used to establish TCP
    tunnels through HTTP proxies, generally for HTTPS, but sometimes for
    other protocols too.

In a relative URI, two sub-parts are identified. The part before the question
mark is called the "path". It is typically the relative path to static objects
on the server. The part after the question mark is called the "query string".
It is mostly used with GET requests sent to dynamic scripts and is very
specific to the language, framework or application in use.

HTTP/2 and HTTP/3 do not convey a version information with the request, so the
version is assumed to be the same as the one of the underlying protocol (i.e.
"HTTP/2"). In addition, these protocols do not send a request line as one part,
but split it into individual fields called "pseudo-headers", whose name start
with a colon, and which are conveniently reassembled by HAProxy into an
equivalent request line. For this reason, request lines found in logs may
slightly differ between HTTP/1.x and HTTP/2 or HTTP/3.


1.3.2. The request headers
--------------------------

The headers start at the second line. They are composed of a name at the
beginning of the line, immediately followed by a colon (':'). Traditionally,
an LWS is added after the colon but that's not required. Then come the values.
Multiple identical headers may be folded into one single line, delimiting the
values with commas, provided that their order is respected. This is commonly
encountered in the "Cookie:" field. A header may span over multiple lines if
the subsequent lines begin with an LWS. In the example in 1.3, lines 4 and 5
define a total of 3 values for the "Accept:" header. Finally, all LWS at the
beginning or at the end of a header are ignored and are not part of the value,
as per the specification.

Contrary to a common misconception, header names are not case-sensitive, and
their values are not either if they refer to other header names (such as the
"Connection:" header). In HTTP/2 and HTTP/3, header names are always sent in
lower case, as can be seen when running in debug mode. Internally, all header
names are normalized to lower case so that HTTP/1.x and HTTP/2 or HTTP/3 use
the exact same representation, and they are sent as-is on the other side. This
explains why an HTTP/1.x request typed with camel case is delivered in lower
case.

The end of the headers is indicated by the first empty line. People often say
that it's a double line feed, which is not exact, even if a double line feed
is one valid form of empty line.

Fortunately, HAProxy takes care of all these complex combinations when indexing
headers, checking values and counting them, so there is no reason to worry
about the way they could be written, but it is important not to accuse an
application of being buggy if it does unusual, valid things.

Important note:
   As suggested by RFC7231, HAProxy normalizes headers by replacing line breaks
   in the middle of headers by LWS in order to join multi-line headers. This
   is necessary for proper analysis and helps less capable HTTP parsers to work
   correctly and not to be fooled by such complex constructs.


1.4. HTTP response
------------------

An HTTP response looks very much like an HTTP request. Both are called HTTP
messages. Let's consider this HTTP response :

  Line     Contents
  number
     1     HTTP/1.1 200 OK
     2     Content-length: 350
     3     Content-Type: text/html

As a special case, HTTP supports so called "Informational responses" as status
codes 1xx. These messages are special in that they don't convey any part of the
response, they're just used as sort of a signaling message to ask a client to
continue to post its request for instance. In the case of a status 100 response
the requested information will be carried by the next non-100 response message
following the informational one. This implies that multiple responses may be
sent to a single request, and that this only works when keep-alive is enabled
(1xx messages appeared in HTTP/1.1). HAProxy handles these messages and is able
to correctly forward and skip them, and only process the next non-100 response.
As such, these messages are neither logged nor transformed, unless explicitly
state otherwise. Status 101 messages indicate that the protocol is changing
over the same connection and that HAProxy must switch to tunnel mode, just as
if a CONNECT had occurred. Then the Upgrade header would contain additional
information about the type of protocol the connection is switching to.


1.4.1. The response line
------------------------

Line 1 is the "response line". It is always composed of 3 fields :

  - a version tag : HTTP/1.1
  - a status code : 200
  - a reason      : OK

The status code is always 3-digit. The first digit indicates a general status :
 - 1xx = informational message to be skipped (e.g. 100, 101)
 - 2xx = OK, content is following   (e.g. 200, 206)
 - 3xx = OK, no content following   (e.g. 302, 304)
 - 4xx = error caused by the client (e.g. 401, 403, 404)
 - 5xx = error caused by the server (e.g. 500, 502, 503)

Status codes greater than 599 must not be emitted in communications, though
certain agents may produce them in logs to report their internal statuses.
Please refer to RFC9110 for the detailed meaning of all such codes. HTTP/2 and
above do not have a version tag and use the ":status" pseudo-header to report
the status code.

The "reason" field is just a hint, but is not parsed by clients. Anything can
be found there, but it's a common practice to respect the well-established
messages. It can be composed of one or multiple words, such as "OK", "Found",
or "Authentication Required". It does not exist in HTTP/2 and above and is
not emitted there. When a response from HTTP/2 or above is transmitted to an
HTTP/1 client, HAProxy will produce such a common reason field that matches
the status code.

HAProxy may emit the following status codes by itself :

  Code  When / reason
   200  access to stats page, and when replying to monitoring requests
   301  when performing a redirection, depending on the configured code
   302  when performing a redirection, depending on the configured code
   303  when performing a redirection, depending on the configured code
   307  when performing a redirection, depending on the configured code
   308  when performing a redirection, depending on the configured code
   400  for an invalid or too large request
   401  when an authentication is required to perform the action (when
        accessing the stats page)
   403  when a request is forbidden by a "http-request deny" rule
   404  when the requested resource could not be found
   408  when the request timeout strikes before the request is complete
   410  when the requested resource is no longer available and will not
        be available again
   413  when a HTTP/1.0 GET/HEAD/DELETE requests has a payload, also see
        the "h1-accept-payload-with-any-method" option
   500  when HAProxy encounters an unrecoverable internal error, such as a
        memory allocation failure, which should never happen
   501 when HAProxy is unable to satisfy a client request because of an
       unsupported feature
   502  when the server returns an empty, invalid or incomplete response, or
        when an "http-response deny" rule blocks the response.
   503  when no server was available to handle the request, or in response to
        monitoring requests which match the "monitor fail" condition
   504  when the response timeout strikes before the server responds

The error 4xx and 5xx codes above may be customized (see "errorloc" in section
4.2). Other status codes can be emitted on purpose by specific actions (see the
"deny", "return" and "redirect" actions in section 4.3 for example).


1.4.2. The response headers
---------------------------

Response headers work exactly like request headers, and as such, HAProxy uses
the same parsing function for both. Please refer to paragraph 1.3.2 for more
details.


2. Configuring HAProxy
----------------------

2.1. Configuration file format
------------------------------

HAProxy's configuration process involves 3 major sources of parameters :

  - the arguments from the command-line, which always take precedence
  - the configuration file(s), whose format is described here
  - the running process's environment, in case some environment variables are
    explicitly referenced

The configuration file follows a fairly simple hierarchical format which obey
a few basic rules:

  1. a configuration file is an ordered sequence of statements

  2. a statement is a single non-empty line before any unprotected "#" (hash)

  3. a line is a series of tokens or "words" delimited by unprotected spaces or
     tab characters

  4. the first word or sequence of words of a line is one of the keywords or
     keyword sequences listed in this document

  5. all other words are all arguments of the first one, some being well-known
     keywords listed in this document, others being values, references to other
     parts of the configuration, or expressions

  6. certain keywords delimit a section inside which only a subset of keywords
     are supported

  7. a section ends at the end of a file or on a special keyword starting a new
     section

This is all that is needed to know to write a simple but reliable configuration
generator, but this is not enough to reliably parse any configuration nor to
figure how to deal with certain corner cases.

First, there are a few consequences of the rules above. Rule 6 and 7 imply that
the keywords used to define a new section are valid everywhere and cannot have
a different meaning in a specific section. These keywords are always a single
word (as opposed to a sequence of words), and traditionally the section that
follows them is designated using the same name. For example when speaking about
the "global section", it designates the section of configuration that follows
the "global" keyword. This usage is used a lot in error messages to help locate
the parts that need to be addressed.

A number of sections create an internal object or configuration space, which
requires to be distinguished from other ones. In this case they will take an
extra word which will set the name of this particular section. For some of them
the section name is mandatory. For example "frontend foo" will create a new
section of type "frontend" named "foo". Usually a name is specific to its
section and two sections of different types may use the same name, but this is
not recommended as it tends to complexify configuration management.

A direct consequence of rule 7 is that when multiple files are read at once,
each of them must start with a new section, and the end of each file will end
a section. A file cannot contain sub-sections nor end an existing section and
start a new one.

Rule 1 mentioned that ordering matters. Indeed, some keywords create directives
that can be repeated multiple times to create ordered sequences of rules to be
applied in a certain order. For example "tcp-request" can be used to alternate
"accept" and "reject" rules on varying criteria. As such, a configuration file
processor must always preserve a section's ordering when editing a file. The
ordering of sections usually does not matter except for the global section
which must be placed before other sections, but it may be repeated if needed.
In addition, some automatic identifiers may automatically be assigned to some
of the created objects (e.g. proxies), and by reordering sections, their
identifiers will change. These ones appear in the statistics for example. As
such, the configuration below will assign "foo" ID number 1 and "bar" ID number
2, which will be swapped if the two sections are reversed:

     listen foo
         bind :80

     listen bar
         bind :81

Another important point is that according to rules 2 and 3 above, empty lines,
spaces, tabs, and comments following and unprotected "#" character are not part
of the configuration as they are just used as delimiters. This implies that the
following configurations are strictly equivalent:

         global#this is the global section
     daemon#daemonize
         frontend         foo
     mode             http   # or tcp

and:

     global
         daemon

     # this is the public web frontend
     frontend foo
         mode http

The common practice is to align to the left only the keyword that initiates a
new section, and indent (i.e. prepend a tab character or a few spaces) all
other keywords so that it's instantly visible that they belong to the same
section (as done in the second example above). Placing comments before a new
section helps the reader decide if it's the desired one. Leaving a blank line
at the end of a section also visually helps spotting the end when editing it.

Tabs are very convenient for indent but they do not copy-paste well. If spaces
are used instead, it is recommended to avoid placing too many (2 to 4) so that
editing in field doesn't become a burden with limited editors that do not
support automatic indent.

In the early days it used to be common to see arguments split at fixed tab
positions because most keywords would not take more than two arguments. With
modern versions featuring complex expressions this practice does not stand
anymore, and is not recommended.


2.2. Quoting and escaping
-------------------------

In modern configurations, some arguments require the use of some characters
that were previously considered as pure delimiters. In order to make this
possible, HAProxy supports character escaping by prepending a backslash ('\')
in front of the character to be escaped, weak quoting with double quotes ("")
around a piece of text, and strong quoting with single quotes ('') around a
piece of text.

This is pretty similar to what is done in a number of programming languages and
very close to what is commonly encountered in Bourne shell. The principle is
the following: while the configuration parser cuts the lines into words, it
also takes care of quotes and backslashes to decide whether a character is a
delimiter or is the raw representation of this character within the current
word. The escape character is then removed, the quotes are removed, and the
remaining word is used as-is as a keyword or argument for example.

If a backslash is needed in a word, it must either be escaped using itself
(i.e. double backslash) or be strongly quoted.

Escaping outside quotes is achieved by preceding a special character by a
backslash ('\'):

  \    to mark a space and differentiate it from a delimiter
  \#   to mark a hash and differentiate it from a comment
  \\   to use a backslash
  \'   to use a single quote and differentiate it from strong quoting
  \"   to use a double quote and differentiate it from weak quoting

In addition, a few non-printable characters may be emitted using their usual
C-language representation:

  \n   to insert a line feed (LF, character \x0a or ASCII 10 decimal)
  \r   to insert a carriage return (CR, character \x0d or ASCII 13 decimal)
  \t   to insert a tab (character \x09 or ASCII 9 decimal)
  \xNN to insert character having ASCII code hex NN (e.g \x0a for LF).

Weak quoting is achieved by surrounding double quotes ("") around the character
or sequence of characters to protect. Weak quoting prevents the interpretation
of:

       space or tab as a word separator
  '    single quote as a strong quoting delimiter
  #    hash as a comment start

Weak quoting permits the interpretation of environment variables (which are not
evaluated outside of quotes) by preceding them with a dollar sign ('$'). If a
dollar character is needed inside double quotes, it must be escaped using a
backslash.

Strong quoting is achieved by surrounding single quotes ('') around the
character or sequence of characters to protect. Inside single quotes, nothing
is interpreted, it's the efficient way to quote regular expressions.

As a result, here is the matrix indicating how special characters can be
entered in different contexts (unprintable characters are replaced with their
name within angle brackets). Note that some characters that may only be
represented escaped have no possible representation inside single quotes,
hence its absence there:

  Character  |  Unquoted     |  Weakly quoted              |  Strongly quoted
  -----------+---------------+-----------------------------+-----------------
    <TAB>    |  \<TAB>, \x09 |  "<TAB>", "\<TAB>", "\x09"  |  '<TAB>'
  -----------+---------------+-----------------------------+-----------------
    <LF>     |  \n, \x0a     |  "\n", "\x0a"               |
  -----------+---------------+-----------------------------+-----------------
    <CR>     |  \r, \x0d     |  "\r", "\x0d"               |
  -----------+---------------+-----------------------------+-----------------
    <SPC>    |  \<SPC>, \x20 |  "<SPC>", "\<SPC>", "\x20"  |  '<SPC>'
  -----------+---------------+-----------------------------+-----------------
    "        |  \", \x22     |  "\"", "\x22"               |  '"'
  -----------+---------------+-----------------------------+-----------------
    #        |  \#, \x23     |  "#", "\#", "\x23"          |  '#'
  -----------+---------------+-----------------------------+-----------------
    $        |  $, \$, \x24  |  "\$", "\x24"               |  '$'
  -----------+---------------+-----------------------------+-----------------
    '        |  \', \x27     |  "'", "\'", "\x27"          |
  -----------+---------------+-----------------------------+-----------------
    \        |  \\, \x5c     |  "\\", "\x5c"               |  '\'
  -----------+---------------+-----------------------------+-----------------

  Example:
      # those are all strictly equivalent:
      log-format %{+Q}o\ %t\ %s\ %{-Q}r
      log-format "%{+Q}o %t %s %{-Q}r"
      log-format '%{+Q}o %t %s %{-Q}r'
      log-format "%{+Q}o %t"' %s %{-Q}r'
      log-format "%{+Q}o %t"' %s'\ %{-Q}r

There is one particular case where a second level of quoting or escaping may be
necessary. Some keywords take arguments within parenthesis, sometimes delimited
by commas. These arguments are commonly integers or predefined words, but when
they are arbitrary strings, it may be required to perform a separate level of
escaping to disambiguate the characters that belong to the argument from the
characters that are used to delimit the arguments themselves. A pretty common
case is the "regsub" converter. It takes a regular expression in argument, and
if a closing parenthesis is needed inside, this one will require to have its
own quotes.

The keyword argument parser is exactly the same as the top-level one regarding
quotes, except that the \#, \$, and \xNN escapes are not processed. But what is
not always obvious is that the delimiters used inside must first be escaped or
quoted so that they are not resolved at the top level.

Let's take this example making use of the "regsub" converter which takes 3
arguments, one regular expression, one replacement string and one set of flags:

    # replace all occurrences of "foo" with "blah" in the path:
    http-request set-path %[path,regsub(foo,blah,g)]

Here no special quoting was necessary. But if now we want to replace either
"foo" or "bar" with "blah", we'll need the regular expression "(foo|bar)". We
cannot write:

    http-request set-path %[path,regsub((foo|bar),blah,g)]

because we would like the string to cut like this:

    http-request set-path %[path,regsub((foo|bar),blah,g)]
                                       |---------|----|-|
                                 arg1 _/         /    /
                                 arg2 __________/    /
                                 arg3 ______________/

but actually what is passed is a string between the opening and closing
parenthesis then garbage:

    http-request set-path %[path,regsub((foo|bar),blah,g)]
                                       |--------|--------|
                        arg1=(foo|bar _/        /
                    trailing garbage  _________/

The obvious solution here seems to be that the closing parenthesis needs to be
quoted, but alone this will not work, because as mentioned above, quotes are
processed by the top-level parser which will resolve them before processing
this word:

    http-request set-path %[path,regsub("(foo|bar)",blah,g)]
    ------------ -------- ----------------------------------
       word1       word2    word3=%[path,regsub((foo|bar),blah,g)]

So we didn't change anything for the argument parser at the second level which
still sees a truncated regular expression as the only argument, and garbage at
the end of the string. By escaping the quotes they will be passed unmodified to
the second level:

    http-request set-path %[path,regsub(\"(foo|bar)\",blah,g)]
    ------------ -------- ------------------------------------
       word1       word2    word3=%[path,regsub("(foo|bar)",blah,g)]
                                                |---------||----|-|
                                arg1=(foo|bar) _/          /    /
                                    arg2=blah  ___________/    /
                                        arg3=g _______________/

Another approach consists in using single quotes outside the whole string and
double quotes inside (so that the double quotes are not stripped again):

    http-request set-path '%[path,regsub("(foo|bar)",blah,g)]'
    ------------ --------  ----------------------------------
       word1       word2    word3=%[path,regsub("(foo|bar)",blah,g)]
                                                |---------||----|-|
                                arg1=(foo|bar) _/          /    /
                                          arg2 ___________/    /
                                          arg3 _______________/

But in this case it's important to note that delimiters embedded into the
higher level string remain pure characters and are not delimiters anymore. It
particularly means that spaces and tabs around commas are part of the string.
The example below is wrong on multiple points:

    http-request set-path '%[path, regsub("(foo|bar)", blah, g)]'
    ------------ --------  --------------------------------------
       word1       word2    word3=%[path, regsub("(foo|bar)", blah, g)]
                                        |--------|---------||-----|--|
                       converter=" regsub" _/        /         /   /
                                    arg1=(foo|bar) _/         /   /
                                     arg2=" blah" ___________/   /
                                        arg3=" g" ______________/

The single fact of surrounding commas with spaces resulted in the spaces being
part of the field itself, hence the converter " regsub" (starting with a
space), which won't be found and will trigger an error, but more subtly, the
replacement string " blah" will insert a space in the output. A good rule of
thumb is to never insert unneeded spaces inside expressions.

When using regular expressions, it can happen that the dollar ('$') character
appears in the expression or that a backslash ('\') is used in the replacement
string. In this case these ones will also be processed inside the double quotes
thus single quotes are preferred (or double escaping). Example:

    http-request set-path '%[path,regsub("^/(here)(/|$)","my/\1",g)]'
    ------------ --------  -----------------------------------------
       word1       word2    word3=%[path,regsub("^/(here)(/|$)","my/\1",g)]
                                                |-------------| |-----||-|
                              arg1=(here)(/|$) _/               /      /
                                    arg2=my/\1 ________________/      /
                                          arg3 ______________________/

Remember that backslashes are not escape characters within single quotes and
that the whole word above is already protected against them using the single
quotes. Conversely, if double quotes had been used around the whole expression,
single the dollar character and the backslashes would have been resolved at top
level, breaking the argument contents at the second level.

Unfortunately, since single quotes can't be escaped inside of strong quoting,
if you need to include single quotes in your argument, you will need to escape
or quote them twice. There are a few ways to do this:

    http-request set-var(txn.foo) str("\\'foo\\'")
    http-request set-var(txn.foo) str(\"\'foo\'\")
    http-request set-var(txn.foo) str(\\\'foo\\\')

When in doubt, simply do not use quotes anywhere, and start to place single or
double quotes around arguments that require a comma or a closing parenthesis,
and think about escaping these quotes using a backslash if the string contains
a dollar or a backslash. Again, this is pretty similar to what is used under
a Bourne shell when double-escaping a command passed to "eval". For API writers
the best is probably to place escaped quotes around each and every argument,
regardless of their contents. Users will probably find that using single quotes
around the whole expression and double quotes around each argument provides
more readable configurations.


2.3. Environment variables
--------------------------

HAProxy's configuration supports environment variables. Those variables are
interpreted only within double quotes. Variables are expanded during the
configuration parsing. Variable names must be preceded by a dollar ("$") and
optionally enclosed with braces ("{}") similarly to what is done in Bourne
shell. Variable names can contain alphanumerical characters or the character
underscore ("_") but should not start with a digit. If the variable contains a
list of several values separated by spaces, it can be expanded as individual
arguments by enclosing the variable with braces and appending the suffix '[*]'
before the closing brace. It is also possible to specify a default value to
use when the variable is not set, by appending that value after a dash '-'
next to the variable name. Note that the default value only replaces non
existing variables, not empty ones.

  Example:

      bind "fd@${FD_APP1}"

      log "${LOCAL_SYSLOG-127.0.0.1}:514" local0 notice  # send to local server

      user "$HAPROXY_USER"

Some variables are defined by HAProxy, they can be used in the configuration
file, or could be inherited by a program (See 12.9. Programs). These variables
are listed in the matrix below, and they are classified among four categories:

  * usable: the variable is accessible from the configuration, either to be
    resolved as-is, or used within conditional blocks or predicates to enable
    or disable this some configuration fragments, as described in section 2.4
    "Conditional blocks".

  * modifiable: the variable can be redefined or unset in the configuration via
    "setenv"/"unsetenv" keywords.

  * listed: the variable is listed in CLI's "show env" command output,
    described in section 9.3 "Unix Sockets commands" of the management guide.

  * exported: variable is exported to launch programs in a modified environment
    (See section 12.9 "Programs"). Note that this does not apply to external
    checks which have their own rules regarding exported variables.

There also two subcategories "master" and "worker", respectively marked 'M' and
'W' in the table below, showing the differences between the two processes when
HAProxy is launched in master-worker mode.

  * master: the variable is set and accessible from the master process. So, it
    will appear in the master CLI's "show env" output and it can be used in
    conditional blocks or directives to enable some special settings for the
    master (see examples in section 2.4 "Conditional blocks").

  * worker: the variable is set and accessible from the worker process. It will
    appear in the worker CLI's "show env" (or the master CLI's "@1 show env")
    and it may as well condition some worker process parameters (see examples
    from section 2.4 "Conditional blocks").

In standalone mode (without "-W" option nor the "master-worker" keyword) the
process behaves like a worker, except for variables "HAPROXY_MASTER_CLI" and
"HAPROXY_MWORKER" which are not defined.

Some variables are marked as not usable and not modifiable:

  * HAPROXY_CFGFILES
  * HAPROXY_MWORKER
  * HAPROXY_CLI
  * HAPROXY_MASTER_CLI
  * HAPROXY_LOCALPEER

Their values are undefined during configuration parsing, they are set later
during the initialization. So, it's recommended not to use these variables
within conditional blocks and not to reference them in the global section's
"setenv"/"resetenv"/"unsetenv" keywords.

The table below summaries the status of each variable for the different working
modes:

  +--------------------------+----------+---------+------------+-----------+
  |        variable          | exported | usable  | modifiable |  listed   |
  |                          |          +---------+------------+-----------+
  |                          |          |  M | W  |   M  |  W  |  M  |  W  |
  +--------------------------+----------+----+----+------+-----+-----+-----+
  | HAPROXY_STARTUP_VERSION  |    X     |  X | X  |      |     |  X  |  X  |
  | HAPROXY_BRANCH           |    X     |  X | X  |      |     |  X  |  X  |
  | HAPROXY_CFGFILES         |    X     |    |    |      |     |  X  |  X  |
  | HAPROXY_MWORKER          |    X     |    |    |      |     |  X  |  X  |
  | HAPROXY_CLI              |          |    |    |      |     |     |  X  |
  | HAPROXY_MASTER_CLI       |          |    |    |      |     |  X  |     |
  | HAPROXY_LOCALPEER        |          |    | X  |      |     |     |  X  |
  | HAPROXY_HTTP_LOG_FMT     |          |    | X  |      |  X  |     |     |
  | HAPROXY_HTTP_CLF_LOG_FMT |          |    | X  |      |  X  |     |     |
  | HAPROXY_HTTPS_LOG_FMT    |          |    | X  |      |  X  |     |     |
  | HAPROXY_TCP_LOG_FMT      |          |    | X  |      |  X  |     |     |
  +--------------------------+----------+----+----+------+-----+-----+-----+

The variables in question are the following:

  * HAPROXY_LOCALPEER: defined at the startup of the process which contains the
    name of the local peer. (See "-L" in the management guide.)

  * HAPROXY_CFGFILES: list of the configuration files loaded by HAProxy,
    separated by semicolons. Can be useful in the case you specified a
    directory.

  * HAPROXY_HTTP_LOG_FMT: contains the value of the default HTTP log format as
    defined in section 8.2.3 "HTTP log format". It can be used to override the
    default log format without having to copy the whole original definition.

  * HAPROXY_HTTP_CLF_LOG_FMT: contains the value of the default HTTP CLF log
    format as defined in section 8.2.3 "HTTP log format". It can be used to
    override the default log format without having to copy the whole original
    definition.

    Example:
      # Add the rule that gave the final verdict to the log
      log-format "${HAPROXY_TCP_LOG_FMT} lr=last_rule_file:last_rule_line"

  * HAPROXY_HTTPS_LOG_FMT: similar to HAPROXY_HTTP_LOG_FMT but for HTTPS log
    format as defined in section 8.2.4 "HTTPS log format".

  * HAPROXY_TCP_LOG_FMT: similar to HAPROXY_HTTP_LOG_FMT but for TCP log format
    as defined in section 8.2.2 "TCP log format".

  * HAPROXY_TCP_CLF_LOG_FMT: similar to HAPROXY_HTTP_CLF_LOG_FMT but for TCP
    CLF log format as defined in section 8.2.2 "TCP log format".

  * HAPROXY_MWORKER: In master-worker mode, this variable is set to 1.

  * HAPROXY_CLI: configured listeners addresses of the stats socket of every
    processe, these addresses are separated by semicolons.

  * HAPROXY_MASTER_CLI: In master-worker mode, listeners addresses of the master
    CLI, separated by semicolons.

  * HAPROXY_STARTUP_VERSION: contains the version used to start, in master-
    worker mode this is the version which was used to start the master, even
    after updating the binary and reloading.

  * HAPROXY_BRANCH: contains the HAProxy branch version (such as "2.8"). It
    does not contain the full version number. It can be useful in case of
    migration if resources (such as maps or certificates) are in a path
    containing the branch number.

In addition, some pseudo-variables are internally resolved and may be used as
regular variables. Pseudo-variables always start with a dot ('.'), and are the
only ones where the dot is permitted. The current list of pseudo-variables is:

  * .FILE: the name of the configuration file currently being parsed.

  * .LINE: the line number of the configuration file currently being parsed,
    starting at one.

  * .SECTION: the name of the section currently being parsed, or its type if
    the section doesn't have a name (e.g. "global"), or an empty string before
    the first section.

These variables are resolved at the location where they are parsed. For example
if a ".LINE" variable is used in a "log-format" directive located in a defaults
section, its line number will be resolved before parsing and compiling the
"log-format" directive, so this same line number will be reused by subsequent
proxies.

This way it is possible to emit information to help locate a rule in variables,
logs, error statuses, health checks, header values, or even to use line numbers
to name some config objects like servers for example.


2.4. Conditional blocks
-----------------------

It may sometimes be convenient to be able to conditionally enable or disable
some arbitrary parts of the configuration, for example to enable/disable SSL or
ciphers, enable or disable some pre-production listeners without modifying the
configuration, or adjust the configuration's syntax to support two distinct
versions of HAProxy during a migration.. HAProxy brings a set of nestable
preprocessor-like directives which allow to integrate or ignore some blocks of
text. These directives must be placed on their own line and they act on the
lines that follow them. Two of them support an expression, the other ones only
switch to an alternate block or end a current level. The 4 following directives
are defined to form conditional blocks:

  - .if <condition>
  - .elif <condition>
  - .else
  - .endif

The ".if" directive nests a new level, ".elif" stays at the same level, ".else"
as well, and ".endif" closes a level. Each ".if" must be terminated by a
matching ".endif". The ".elif" may only be placed after ".if" or ".elif", and
there is no limit to the number of ".elif" that may be chained. There may be
only one ".else" per ".if" and it must always be after the ".if" or the last
".elif" of a block.

Comments may be placed on the same line if needed after a '#', they will be
ignored. The directives are tokenized like other configuration directives, and
as such it is possible to use environment variables in conditions.

Conditions can also be evaluated on startup with the -cc parameter.
See "3. Starting HAProxy" in the management doc.

The conditions are either an empty string (which then returns false), or an
expression made of any combination of:

  - the integer zero ('0'), always returns "false"
  - a non-nul integer (e.g. '1'), always returns "true".
  - a predicate optionally followed by argument(s) in parenthesis.
  - a condition placed between a pair of parenthesis '(' and ')'
  - an exclamation mark ('!') preceding any of the non-empty elements above,
    and which will negate its status.
  - expressions combined with a logical AND ('&&'), which will be evaluated
    from left to right until one returns false
  - expressions combined with a logical OR ('||'), which will be evaluated
    from right to left until one returns true

The same line tokenizer and argument parser are used as for the rest of the
configuration language. Words are split around consecutive series of one or
more unquoted spaces or tabs, and are reassembled together using a single space
to delimit them before evaluation, in order to save the user from having to
quote the entire line. But this also means that spaces surrounding commas or
parenthesis are definitely part of the value, which is not always expected.
For example, the expression below:

   .if defined( HAPROXY_MWORKER )

will test for the existence of variable " HAPROXY_MWORKER " (with spaces),
and this one:

   .if streq("$ENABLE_SSL",     1)

will compare the environment variable "ENABLE_SSL" to the value " 1" (with a
single leading space). The reason is the line is first split into words like
this:

   .if streq("$ENABLE_SSL",     1)
  |---|--------------------|   |--|
    1           2               3

then the weak quoting is applied and environment variable "$ENABLE_SSL" is
resolved (let's say for example that ENABLE_SSL=0), and finally the words are
reassembled into a single string by placing a single space between the words:

   .if streq(0, 1)
  |---|-------|--|
    1     2     3

and only then it is parsed as a single expression. The space that was inserted
between the comma and "1" is still part of the argument value, making this
argument " 1":

   .if streq(0, 1)
  |---|-----|-|--|
    \    \    \  \_ argument2: " 1"
     \    \    \___ argument1: "0"
      \    \_______ function: "streq"
       \___________ directive: ".if"

It's visible here that even if ENABLE_SSL had been equal to "1", it wouldn't
have matched " 1" since the string would differ by one space.

Note: as explained in section "2.2. Quoting and escaping", a good rule of thumb
      is to never insert unneeded spaces inside expressions.

Note that like in other languages, the AND operator has precedence over the OR
operator, so that "A && B || C && D" evalues as "(A && B) || (C && D)".

The list of currently supported predicates is the following:

  - defined(<name>)       : returns true if an environment variable <name>
                            exists, regardless of its contents

  - feature(<name>)       : returns true if feature <name> is listed as present
                            in the features list reported by "haproxy -vv"
                            (which means a <name> appears after a '+')

  - openssl_version_atleast(<ver>) : returns true if the current openssl
                            version is at least as recent as <ver> otherwise
                            false.
                            Libraries like LibreSSL, AWS-LC and WolfSSL also
                            provide a pseudo OpenSSL version.
                            Example:
                              ssllib_name_startswith(OpenSSL) && openssl_version_atleast(1.1.1)

  - openssl_version_before(<ver>) : returns true if the current openssl
                            version is strictly older than <ver> otherwise
                            false.
                            Libraries like LibreSSL, AWS-LC and WolfSSL also
                            provide a pseudo OpenSSL version.
                            Example: openssl_version_before(3.5.0)

  - ssllib_name_startswith(<name>)  : return true if the SSL library name
                            HAProxy was linked with, starts with <name>.
                            Example: ssllib_name_startswith(wolfSSL)

  - streq(<str1>,<str2>)  : returns true only if the two strings are equal
  - strneq(<str1>,<str2>) : returns true only if the two strings differ
  - strstr(<str1>,<str2>) : returns true only if the second string is found in
                            the first one.

  - version_atleast(<ver>): returns true if the current haproxy version is
                            at least as recent as <ver> otherwise false. The
                            version syntax is the same as shown by "haproxy -v"
                            and missing components are assumed as being zero.

  - version_before(<ver>) : returns true if the current haproxy version is
                            strictly older than <ver> otherwise false. The
                            version syntax is the same as shown by "haproxy -v"
                            and missing components are assumed as being zero.

  - enabled(<opt>)        : returns true if the option <opt> is enabled at
                            run-time. Only a subset of options are supported:
                                POLL, EPOLL, KQUEUE, EVPORTS, SPLICE,
                                GETADDRINFO, REUSEPORT, FAST-FORWARD,
                                SERVER-SSL-VERIFY-NONE

Example:

   # 1. HAPROXY_MWORKER variable is set automatically by HAProxy in master and
   # in worker process environments (see HAProxy variables matrix from
   # 2.3. Environment variables). Its presence enables an additional listener.

   global
     master-worker

   .if defined(HAPROXY_MWORKER)
       listen mwcli_px
          bind :1111
          ...
   .endif

   # 2. HAPROXY_BRANCH is set automatically by HAProxy in master and in worker
   # process environments (see HAProxy variables matrix from 2.3. Environment
   # variables). We check HAPROXY_BRANCH value and conditionally enable
   # mworker-max-reloads parameter.

   global
     master-worker

   .if streq("$HAPROXY_BRANCH",3.1)
        mworker-max-reloads 5
   .endif

   # 3. Some arbitrary environment variables are set by user in the global
   # section. If HAProxy is started in master-worker mode, they are presented in
   # master and in worker process environments. We check values of these
   # variables and conditionally enable ports 80 and 443. Environment variables
   # checks can be mixed with features and version checks.

   global
     setenv WITH_SSL yes
     unsetenv SSL_ONLY

   .if strneq("$SSL_ONLY",yes)
          bind :80
   .endif

   .if streq("$WITH_SSL",yes)
     .if feature(OPENSSL)
          bind :443 ssl crt ...
     .endif
   .endif

   .if feature(OPENSSL) && (streq("$WITH_SSL",yes) || streq("$SSL_ONLY",yes))
          bind :443 ssl crt ...
   .endif

   .if version_atleast(2.4-dev19)
       profiling.memory on
   .endif

   .if !feature(OPENSSL)
       .alert "SSL support is mandatory"
   .endif

Four other directives are provided to report some status:

  - .diag "message"    : emit this message only when in diagnostic mode (-dD)
  - .notice "message"  : emit this message at level NOTICE
  - .warning "message" : emit this message at level WARNING
  - .alert "message"   : emit this message at level ALERT

Messages emitted at level WARNING may cause the process to fail to start if
"zero-warning" is enabled. Messages emitted at level ALERT will always cause a
fatal error. These can be used to detect some inappropriate conditions and
provide advice to the user.

Example:

  .if "${A}"
    .if "${B}"
       .notice "A=1, B=1"
    .elif "${C}"
       .notice "A=1, B=0, C=1"
    .elif "${D}"
       .warning "A=1, B=0, C=0, D=1"
    .else
       .alert "A=1, B=0, C=0, D=0"
    .endif
  .else
       .notice "A=0"
  .endif

  .diag "WTA/2021-05-07: replace 'redirect' with 'return' after switch to 2.4"
        http-request redirect location /goaway if ABUSE


2.5. Time format
----------------

Some parameters involve values representing time, such as timeouts. These
values are generally expressed in milliseconds (unless explicitly stated
otherwise) but may be expressed in any other unit by suffixing the unit to the
numeric value. It is important to consider this because it will not be repeated
for every keyword. Supported units are :

  - us : microseconds. 1 microsecond = 1/1000000 second
  - ms : milliseconds. 1 millisecond = 1/1000 second. This is the default.
  - s  : seconds. 1s = 1000ms
  - m  : minutes. 1m = 60s = 60000ms
  - h  : hours.   1h = 60m = 3600s = 3600000ms
  - d  : days.    1d = 24h = 1440m = 86400s = 86400000ms


2.6. Size format
----------------

Some parameters involve values representing size, such as bandwidth limits.
These values are generally expressed in bytes (unless explicitly stated
otherwise) but may be expressed in any other unit by suffixing the unit to the
numeric value. It is important to consider this because it will not be repeated
for every keyword. Supported units are case insensitive :

  - k : kilobytes. 1 kilobyte = 1024 bytes
  - m : megabytes. 1 megabyte = 1048576 bytes
  - g : gigabytes. 1 gigabyte = 1073741824 bytes

Both time and size formats require integers, decimal notation is not allowed.


2.7. Name format for maps and ACLs
-------------------------------------

It is possible to use a list of pattern for maps or ACLs. A list of pattern is
identified by its name and may be used at different places in the
configuration. List of pattern are split on three categories depending on
the name format:

  * Lists of pattern based on regular files: It is the default case. The
    filename, absolute or relative, is used as name. The file must exist
    otherwise an error is triggered. But it may be empty. The "file@" prefix
    may also be specified but it is not part of the name identifying the
    list. A filename, with or without the prefix, references the same list of
    pattern.

  * Lists of pattern based on optional files: The filename must be preceded by
    "opt@" prefix. The file existence is optional. If the file exists, its
    content is loaded but no error is reported if not. The prefix is not part
    of the name identifying the list. It means, for a given filename, Optional
    files and regular files reference the same list of pattern.

  * Lists of pattern based on virtual files: The name is just an identifier. It
    is not a reference to any file. "virt@" prefix must be used. It is part of
    the name. Thus it cannot be mixed with other kind of lists.

Virtual files are useful when patterns are fully dynamically managed with no
patterns on startup and on reload. Optional files may be used under the same
conditions. But patterns can be dumped in the file, via an external script based
on the "show map" CLI command for instance. This way, it is possible to keep
patterns on reload.

Note: Even if it is unlikely, it means no regular file starting with "file@",
      "opt@" or "virt@" can be loaded, except by adding "./" explicitly in
      front of the filename (for instance "file@./virt@map").


2.8. Variables
--------------

In HAProxy configuration, variables can be used in sample fetch functions,
converters, log-format strings or TCP/HTTP actions. Process-wide variables can
be defined, globally accessible for the whole life of the process. Some others
have a shorter lifespan. Variables are similar to those found in shell
scripts. It is a symbolic name for a chunk of memory. The variables size is not
limited and is dynamically allocated. So they must be used with caution,
especially for an intensive usage. However, it is possible to limit the maximum
amount of memory used by the variables by setting "tune.vars" global parameters.

Variables must be designated using the format "<scope>.<name>". The <scope> is
a single word indicating the life time of the variable. The <name> part, inside
a scope, may only contain characters 'a-z', 'A-Z', '0-9' and '_'. It is unique
in this scope but the same name in different scopes can be used and refers to
different variables. Supported scopes are:

  * proc  : for variables known during the whole process lifespan and globally
            accessible. "proc" variables can be manipulated from the CLI using
            "get var" and "set var" commands. They can also be set from
            "global" sections via "set-var" and "set-var-fmt" directives.

  * sess  : for variables known during the whole lifespan of a session. "sess"
            variables are private to a session, not visbile from outside it and
            not shared with other sessions.

  * txn   : for variables known during the whole lifespan of a transaction. "txn"
            variables are private to a stream, not visible from outside it and
            not shared with other streams.

  * req   : for variables known during the request processing for a specific
            stream. "req" variables are visible from the stream creation and
            until the first server connection attempt. They are private to a
            stream, not visible from outside it and not shared with other
            streams. There is no overlap at all between "req" and "res"
            variables.

  * res   : for variables known during the response processing for a specific
            stream. "res" variables are visible from the first server
            connection attempt and until the stream destruction. They are
            private to a stream, not visible from outside it and not shared
            with other streams. There is no overlap at all between "req" and
            "res" variables.

  * check : for variables known during a health-check execution. "check"
            variables are private to a health-check, not visible from outside
            it and are not shared with other health-checks. They can be set
            using dedicated "tcp-check" or "http-check" directives.

Depending on the context, extra scopes referencing the parent of a current
stream can be used:

  * psess : same as "sess" but using the session of the parent stream, if any.

  * ptxn  : same as "txn" but using the transaction of the parent stream, if
            any.

  * preq  : same as "req" but using the parent stream, if any. "preq"
            variables are only accessible during request processing of the
            parent stream.

  * pres  : same as "res" but using the parent stream, if any. "pres"
            variables are only accessible during response processing of the
            parent stream.

Scopes referencing the parent stream are usable from the moment it is defined.
Most of time, there is no parent stream. But, if applicable, this will be
explicitly specified. For now, it is only possible to retrieve the value of
variables defined in a scope of the parent stream. It is not possible to set
nor unset such variables. Usually a child stream performs some processing for
the parent at a precise moment and prevents it from making progress until the
operation it does is completed. This means that the parent may be stopped in
the middle of a request processing or a response processing for example. As
such, certain scopes will not be available from the child stream. For example
if a request is subject to some analysis performed by a child stream, this
child stream will not find any variable in the "pres" scope since the parent is
not processing a response, hence doesn't have any variables in its "res" scope.

The content of a variable is the result of the evaluation of a sample fetch
expression and it inherits of the output type of this expression. It is
important when the variable is used because its type must be compatible with
its usage. For instance a variable containing a string used in "add()"
converter must be convertible to a valid integer to succeed. It is especially
true when variables are compared to static value. The right matching method
must be used.


2.9. Address formats
--------------------

Several statements as "bind, "server", "nameserver" and "log" requires an
address.

This address can be a host name, an IPv4 address, an IPv6 address, or '*'.
The '*' is equal to the special address "0.0.0.0" and can be used, in the case
of "bind" or "dgram-bind" to listen on all IPv4 of the system.The IPv6
equivalent is '::'.

Depending of the statement, a port or port range follows the IP address. This
is mandatory on 'bind' statement, optional on 'server'.

This address can also begin with a slash '/'. It is considered as the "unix"
family, and '/' and following characters must be present the path.

Default socket type or transport method "datagram" or "stream" depends on the
configuration statement showing the address. Indeed, 'bind' and 'server' will
use a "stream" socket type by default whereas 'log', 'nameserver' or
'dgram-bind' will use a "datagram".

Optionally, a prefix could be used to force the address family and/or the
socket type and the transport method.


2.9.1. Address family prefixes
------------------------------

'abns@<name>' following <name> is an abstract namespace (Linux only).

'abnsz@<name>' following <name> is a zero-terminated abstract namespace
               (Linux only).

'fd@<n>'      following address is a file descriptor <n> inherited from the
              parent. The fd must be bound and may or may not already be
              listening.

'ip@<address>[:port1[-port2]]' following <address> is considered as an IPv4 or
                               IPv6 address depending on the syntax. Depending
                               on the statement using this address, a port or
                               a port range may or must be specified.

'ipv4@<address>[:port1[-port2]]' following <address> is always considered as
                                 an IPv4 address. Depending on the statement
                                 using this address, a port or a port range
                                 may or must be specified.

'ipv6@<address>[:port1[-port2]]' following <address> is always considered as
                                 an IPv6 address. Depending on the statement
                                 using this address, a port or a port range
                                 may or must be specified.

'sockpair@<n>' following address is the file descriptor of a connected unix
               socket or of a socketpair. During a connection, the initiator
               creates a pair of connected sockets, and passes one of them
               over the FD to the other end. The listener waits to receive
               the FD from the unix socket and uses it as if it were the FD
               of an accept(). Should be used carefully.

               Bugs: This protocol is known to be unreliable on macOS because
               of an issue in the macOS sendmsg(2) implementation. The
               connection might not be accepted correctly.


'unix@<path>'  following string is considered as a UNIX socket <path>. this
               prefix is useful to declare an UNIX socket path which don't
               start by slash '/'.


2.9.2. Socket type prefixes
---------------------------

Previous "Address family prefixes" can also be prefixed to force the socket
type and the transport method. The default depends of the statement using
this address but in some cases the user may force it to a different one.
This is the case for "log" statement where the default is syslog over UDP
but we could force to use syslog over TCP.

Those prefixes were designed for internal purpose and users should instead use
use aliases of the next section "2.9.3 Protocol prefixes". However these can
sometimes be convenient, for example in combination with inherited sockets
known by their file descriptor number, in which case the address family is "fd"
and the socket type must be declared.

If users need one those prefixes to perform what they expect because
they can not configure the same using the protocol prefixes, they should
report this to the maintainers.

'stream+<family>@<address>' forces socket type and transport method
                            to "stream"

'dgram+<family>@<address>'  forces socket type and transport method
                            to "datagram".

'quic+<family>@<address>'   forces socket type to "datagram" and transport
                            method to "stream".



2.9.3. Protocol prefixes
------------------------

'quic4@<address>[:port1[-port2]]' following <address> is always considered as
                                  an IPv4 address but socket type is forced to
                                  "datagram" and the transport method is forced
                                  to "stream". Depending on the statement using
                                  this address, a UDP port or port range can or
                                  must be specified. It is equivalent to
                                  "quic+ipv4@".

'quic6@<address>[:port1[-port2]]' following <address> is always considered as
                                  an IPv6 address but socket type is forced to
                                  "datagram" and the transport method is forced
                                  to "stream". Depending on the statement using
                                  this address, a UDP port or port range can or
                                  must be specified. It is equivalent to
                                  "quic+ipv6@".

'tcp@<address>[:port1[-port2]]' following <address> is considered as an IPv4
                                or IPv6 address depending of the syntax but
                                socket type and transport method is forced to
                                "stream". Depending on the statement using
                                this address, a port or a port range can or
                                must be specified. It is considered as an alias
                                of 'stream+ip@'.

'tcp4@<address>[:port1[-port2]]' following <address> is always considered as
                                 an IPv4 address but socket type and transport
                                 method is forced to "stream". Depending on the
                                 statement using this address, a port or port
                                 range can or must be specified.
                                 It is considered as an alias of 'stream+ipv4@'.

'tcp6@<address>[:port1[-port2]]' following <address> is always considered as
                                 an IPv6 address but socket type and transport
                                 method is forced to "stream". Depending on the
                                 statement using this address, a port or port
                                 range can or must be specified.
                                 It is considered as an alias of 'stream+ipv4@'.

'mptcp@<address>[:port1[-port2]]' following <address> is considered as an IPv4
                                  or IPv6 address depending of the syntax but
                                  socket type and transport method is forced to
                                  "stream", with the MPTCP protocol. Depending
                                  on the statement using this address, a port or
                                  a port range can or must be specified.

'mptcp4@<address>[:port1[-port2]]' following <address> is always considered as
                                   an IPv4 address but socket type and transport
                                   method is forced to "stream", with the MPTCP
                                   protocol. Depending on the statement using
                                   this address, a port or port range can or
                                   must be specified.

'mptcp6@<address>[:port1[-port2]]' following <address> is always considered as
                                   an IPv6 address but socket type and transport
                                   method is forced to "stream", with the MPTCP
                                   protocol. Depending on the statement using
                                   this address, a port or port range can or
                                   must be specified.

'udp@<address>[:port1[-port2]]' following <address> is considered as an IPv4
                                or IPv6 address depending of the syntax but
                                socket type and transport method is forced to
                                "datagram". Depending on the statement using
                                this address, a port or a port range can or
                                must be specified. It is considered as an alias
                                of 'dgram+ip@'.

'udp4@<address>[:port1[-port2]]' following <address> is always considered as
                                 an IPv4 address but socket type and transport
                                 method is forced to "datagram". Depending on
                                 the statement using this address, a port or
                                 port range can or must be specified.
                                 It is considered as an alias of 'dgram+ipv4@'.

'udp6@<address>[:port1[-port2]]' following <address> is always considered as
                                 an IPv6 address but socket type and transport
                                 method is forced to "datagram". Depending on
                                 the statement using this address, a port or
                                 port range can or must be specified.
                                 It is considered as an alias of 'dgram+ipv4@'.

'uxdg@<path>'    following string is considered as a unix socket <path> but
                 transport method is forced to "datagram". It is considered as
                 an alias of 'dgram+unix@'.

'uxst@<path>'    following string is considered as a unix socket <path> but
                 transport method is forced to "stream". It is considered as
                 an alias of 'stream+unix@'.

In future versions, other prefixes could be used to specify protocols like
QUIC which proposes stream transport based on socket of type "datagram".


2.10. Examples
-------------

    # Simple configuration for an HTTP proxy listening on port 80 on all
    # interfaces and forwarding requests to a single backend "servers" with a
    # single server "server1" listening on 127.0.0.1:8000
    global
        daemon
        maxconn 256

    defaults
        mode http
        timeout connect 5000ms
        timeout client 50000ms
        timeout server 50000ms

    frontend http-in
        bind *:80
        default_backend servers

    backend servers
        server server1 127.0.0.1:8000 maxconn 32


    # The same configuration defined with a single listen block. Shorter but
    # less expressive, especially in HTTP mode.
    global
        daemon
        maxconn 256

    defaults
        mode http
        timeout connect 5000ms
        timeout client 50000ms
        timeout server 50000ms

    listen http-in
        bind *:80
        server server1 127.0.0.1:8000 maxconn 32


Assuming haproxy is in $PATH, test these configurations in a shell with:

    $ sudo haproxy -f configuration.conf -c


3. Global parameters
--------------------

Parameters in the "global" section are process-wide and often OS-specific. They
are generally set once for all and do not need being changed once correct. Some
of them have command-line equivalents.

The following keywords are supported in the "global" section :

 * Process management and security
   - 51degrees-allow-unmatched
   - 51degrees-cache-size
   - 51degrees-data-file
   - 51degrees-difference
   - 51degrees-drift
   - 51degrees-property-name-list
   - 51degrees-property-separator
   - 51degrees-use-performance-graph
   - 51degrees-use-predictive-graph
   - ca-base
   - chroot
   - cluster-secret
   - cpu-map
   - cpu-policy
   - cpu-set
   - crt-base
   - daemon
   - default-path
   - description
   - deviceatlas-json-file
   - deviceatlas-log-level
   - deviceatlas-properties-cookie
   - deviceatlas-separator
   - dns-accept-family
   - expose-deprecated-directives
   - expose-experimental-directives
   - external-check
   - fd-hard-limit
   - gid
   - grace
   - group
   - h1-accept-payload-with-any-method
   - h1-case-adjust
   - h1-case-adjust-file
   - h1-do-not-close-on-insecure-transfer-encoding
   - h2-workaround-bogus-websocket-clients
   - hard-stop-after
   - harden.reject-privileged-ports.tcp
   - harden.reject-privileged-ports.quic
   - insecure-fork-wanted
   - insecure-setuid-wanted
   - issuers-chain-path
   - key-base
   - limited-quic
   - localpeer
   - log
   - log-send-hostname
   - log-tag
   - lua-load
   - lua-load-per-thread
   - lua-prepend-path
   - mworker-max-reloads
   - nbthread
   - no-quic
   - node
   - numa-cpu-mapping
   - ocsp-update.disable
   - ocsp-update.maxdelay
   - ocsp-update.mindelay
   - ocsp-update.httpproxy
   - ocsp-update.mode
   - pidfile
   - pp2-never-send-local
   - presetenv
   - prealloc-fd
   - resetenv
   - set-dumpable
   - set-var
   - setenv
   - ssl-default-bind-ciphers
   - ssl-default-bind-ciphersuites
   - ssl-default-bind-client-sigalgs
   - ssl-default-bind-curves
   - ssl-default-bind-options
   - ssl-default-bind-sigalgs
   - ssl-default-server-ciphers
   - ssl-default-server-ciphersuites
   - ssl-default-server-client-sigalgs
   - ssl-default-server-curves
   - ssl-default-server-options
   - ssl-default-server-sigalgs
   - ssl-dh-param-file
   - ssl-propquery
   - ssl-provider
   - ssl-provider-path
   - ssl-security-level
   - ssl-server-verify
   - ssl-skip-self-issued-ca
   - stats
   - stats-file
   - strict-limits
   - uid
   - ulimit-n
   - unix-bind
   - unsetenv
   - user
   - wurfl-cache-size
   - wurfl-data-file
   - wurfl-information-list
   - wurfl-information-list-separator

 * Performance tuning
   - busy-polling
   - max-spread-checks
   - maxcompcpuusage
   - maxcomprate
   - maxconn
   - maxconnrate
   - maxpipes
   - maxsessrate
   - maxsslconn
   - maxsslrate
   - maxzlibmem
   - no-memory-trimming
   - noepoll
   - noevports
   - nogetaddrinfo
   - nokqueue
   - nopoll
   - noreuseport
   - nosplice
   - profiling.memory
   - profiling.tasks
   - server-state-base
   - server-state-file
   - spread-checks
   - ssl-engine
   - ssl-mode-async
   - tune.applet.zero-copy-forwarding
   - tune.buffers.limit
   - tune.buffers.reserve
   - tune.bufsize
   - tune.bufsize.small
   - tune.comp.maxlevel
   - tune.disable-fast-forward
   - tune.disable-zero-copy-forwarding
   - tune.epoll.mask-events
   - tune.events.max-events-at-once
   - tune.fail-alloc
   - tune.fd.edge-triggered
   - tune.h1.zero-copy-fwd-recv
   - tune.h1.zero-copy-fwd-send
   - tune.h2.be.glitches-threshold
   - tune.h2.be.initial-window-size
   - tune.h2.be.max-concurrent-streams
   - tune.h2.be.rxbuf
   - tune.h2.fe.glitches-threshold
   - tune.h2.fe.initial-window-size
   - tune.h2.fe.max-concurrent-streams
   - tune.h2.fe.max-total-streams
   - tune.h2.fe.rxbuf
   - tune.h2.header-table-size
   - tune.h2.initial-window-size
   - tune.h2.max-concurrent-streams
   - tune.h2.max-frame-size
   - tune.h2.zero-copy-fwd-send
   - tune.http.cookielen
   - tune.http.logurilen
   - tune.http.maxhdr
   - tune.idle-pool.shared
   - tune.idletimer
   - tune.lua.bool-sample-conversion
   - tune.lua.burst-timeout
   - tune.lua.forced-yield
   - tune.lua.log.loggers
   - tune.lua.log.stderr
   - tune.lua.maxmem
   - tune.lua.service-timeout
   - tune.lua.session-timeout
   - tune.lua.task-timeout
   - tune.max-checks-per-thread
   - tune.maxaccept
   - tune.maxpollevents
   - tune.maxrewrite
   - tune.max-rules-at-once
   - tune.memory.hot-size
   - tune.pattern.cache-size
   - tune.peers.max-updates-at-once
   - tune.pipesize
   - tune.pool-high-fd-ratio
   - tune.pool-low-fd-ratio
   - tune.pt.zero-copy-forwarding
   - tune.quic.cc-hystart
   - tune.quic.cc.cubic.min-losses
   - tune.quic.disable-tx-pacing
   - tune.quic.disable-udp-gso
   - tune.quic.frontend.glitches-threshold
   - tune.quic.frontend.max-data-size
   - tune.quic.frontend.max-idle-timeout
   - tune.quic.frontend.max-streams-bidi
   - tune.quic.frontend.max-tx-mem
   - tune.quic.frontend.stream-data-ratio
   - tune.quic.frontend.default-max-window-size
   - tune.quic.max-frame-loss
   - tune.quic.reorder-ratio
   - tune.quic.retry-threshold
   - tune.quic.socket-owner
   - tune.quic.zero-copy-fwd-send
   - tune.renice.runtime
   - tune.renice.startup
   - tune.rcvbuf.backend
   - tune.rcvbuf.client
   - tune.rcvbuf.frontend
   - tune.rcvbuf.server
   - tune.recv_enough
   - tune.ring.queues
   - tune.runqueue-depth
   - tune.sched.low-latency
   - tune.sndbuf.backend
   - tune.sndbuf.client
   - tune.sndbuf.frontend
   - tune.sndbuf.server
   - tune.stick-counters
   - tune.ssl.cachesize
   - tune.ssl.capture-buffer-size
   - tune.ssl.capture-cipherlist-size (deprecated)
   - tune.ssl.certificate-compression
   - tune.ssl.default-dh-param
   - tune.ssl.force-private-cache
   - tune.ssl.hard-maxrecord
   - tune.ssl.keylog
   - tune.ssl.lifetime
   - tune.ssl.maxrecord
   - tune.ssl.ssl-ctx-cache-size
   - tune.ssl.ocsp-update.maxdelay (deprecated)
   - tune.ssl.ocsp-update.mindelay (deprecated)
   - tune.takeover-other-tg-connections
   - tune.vars.global-max-size
   - tune.vars.proc-max-size
   - tune.vars.reqres-max-size
   - tune.vars.sess-max-size
   - tune.vars.txn-max-size
   - tune.zlib.memlevel
   - tune.zlib.windowsize

 * Debugging
   - anonkey
   - debug.counters
   - force-cfg-parser-pause
   - quiet
   - warn-blocked-traffic-after
   - zero-warning

 * HTTPClient
   - httpclient.resolvers.disabled
   - httpclient.resolvers.id
   - httpclient.resolvers.prefer
   - httpclient.retries
   - httpclient.ssl.ca-file
   - httpclient.ssl.verify
   - httpclient.timeout.connect

3.1. Process management and security
------------------------------------

51degrees-data-file <file path>
  The path of the 51Degrees data file to provide device detection services. The
  file should be unzipped and accessible by HAProxy with relevant permissions.

  Please note that this option is only available when HAProxy has been
  compiled with USE_51DEGREES.

51degrees-property-name-list [<string> ...]
  A list of 51Degrees property names to be load from the dataset. A full list
  of names is available on the 51Degrees website:
  https://51degrees.com/resources/property-dictionary

  Please note that this option is only available when HAProxy has been
  compiled with USE_51DEGREES.

51degrees-property-separator <char>
  A char that will be appended to every property value in a response header
  containing 51Degrees results. If not set that will be set as ','.

  Please note that this option is only available when HAProxy has been
  compiled with USE_51DEGREES.

51degrees-cache-size <number>
  Sets the size of the 51Degrees converter cache to <number> entries. This
  is an LRU cache which reminds previous device detections and their results.
  By default, this cache is disabled.

  Please note that this option is only available when HAProxy has been
  compiled with USE_51DEGREES.

51degrees-use-performance-graph { on | off }
  Enables ('on') or disables ('off') the use of the performance graph in
  the detection process. The default value depends on 51Degrees library.

  Please note that this option is only available when HAProxy has been
  compiled with USE_51DEGREES and 51DEGREES_VER=4.

51degrees-use-predictive-graph { on | off }
  Enables ('on') or disables ('off') the use of the predictive graph in
  the detection process. The default value depends on 51Degrees library.

  Please note that this option is only available when HAProxy has been
  compiled with USE_51DEGREES and 51DEGREES_VER=4.

51degrees-drift <number>
  Sets the drift value that a detection can allow.

  Please note that this option is only available when HAProxy has been
  compiled with USE_51DEGREES and 51DEGREES_VER=4.

51degrees-difference <number>
  Sets the difference value that a detection can allow.

  Please note that this option is only available when HAProxy has been
  compiled with USE_51DEGREES and 51DEGREES_VER=4.

51degrees-allow-unmatched { on | off }
  Enables ('on') or disables ('off') the use of unmatched nodes in the
  detection process. The default value depends on 51Degrees library.

  Please note that this option is only available when HAProxy has been
  compiled with USE_51DEGREES and 51DEGREES_VER=4.

acme.scheduler { auto | off }
  Enable or disable the ACME scheduler.

  The ACME scheduler starts at HAProxy startup, it will loop over the
  certificates and start an ACME renewal task when the notAfter value is past
  curtime + (notAfter - notBefore) / 12, or 7 days if notBefore is not defined.
  The scheduler will then sleep and wakeup after 12 hours.

  The default value is "auto".

  See also: acme

ca-base <dir>
  Assigns a default directory to fetch SSL CA certificates and CRLs from when a
  relative path is used with "ca-file", "ca-verify-file" or "crl-file"
  directives. Absolute locations specified in "ca-file", "ca-verify-file" and
  "crl-file" prevail and ignore "ca-base".

chroot <jail dir>
  Changes current directory to <jail dir> and performs a chroot() there before
  dropping privileges. This increases the security level in case an unknown
  vulnerability would be exploited, since it would make it very hard for the
  attacker to exploit the system. This only works when the process is started
  with superuser privileges. It is important to ensure that <jail_dir> is both
  empty and non-writable to anyone.

close-spread-time <time>
  Define a time window during which idle connections and active connections
  closing is spread in case of soft-stop. After a SIGUSR1 is received and the
  grace period is over (if any), the idle connections will all be closed at
  once if this option is not set, and active HTTP or HTTP2 connections will be
  ended after the next request is received, either by appending a "Connection:
  close" line to the HTTP response, or by sending a GOAWAY frame in case of
  HTTP2. When this option is set, connection closing will be spread over this
  set <time>.
  If the close-spread-time is set to "infinite", active connection closing
  during a soft-stop will be disabled. The "Connection: close" header will not
  be added to HTTP responses (or GOAWAY for HTTP2) anymore and idle connections
  will only be closed once their timeout is reached (based on the various
  timeouts set in the configuration).

  Arguments :
    <time>  is a time window (by default in milliseconds) during which
            connection closing will be spread during a soft-stop operation, or
            "infinite" if active connection closing should be disabled.

  It is recommended to set this setting to a value lower than the one used in
  the "hard-stop-after" option if this one is used, so that all connections
  have a chance to gracefully close before the process stops.

  See also: grace, hard-stop-after, idle-close-on-response

cluster-secret <secret>
  Define an ASCII string secret shared between several nodes belonging to the
  same cluster. It could be used for different usages. It is at least used to
  derive stateless reset tokens for all the QUIC connections instantiated by
  this process. This is also the case to derive secrets used to encrypt Retry
  tokens.

  If this parameter is not set, a random value will be selected on process
  startup. This allows to use features which rely on it, albeit with some
  limitations.

cpu-map [auto:]<thread-group>[/<thread-set>] <cpu-set>[,...] [...]
  On some operating systems, it is possible to bind a thread group or a thread
  to a specific CPU set. This means that the designated threads will never run
  on other CPUs. The "cpu-map" directive specifies CPU sets for individual
  threads or thread groups. The first argument is a thread group range,
  optionally followed by a thread set. These ranges have the following format:

      all | odd | even | number[-[number]]

  <number> must be a number between 1 and 32 or 64, depending on the machine's
  word size. Any group IDs above 'thread-groups' and any thread IDs above the
  machine's word size are ignored. All thread numbers are relative to the group
  they belong to. It is possible to specify a range with two such number
  delimited by a dash ('-'). It also is possible to specify all threads at once
  using "all", only odd numbers using "odd" or even numbers using "even", just
  like with the "thread" bind directive. The second and forthcoming arguments
  are CPU sets. Each CPU set is either a unique number starting at 0 for the
  first CPU or a range with two such numbers delimited by a dash ('-'). These
  CPU numbers and ranges may be repeated by delimiting them with commas or by
  passing more ranges as new arguments on the same line. Outside of Linux and
  BSD operating systems, there may be a limitation on the maximum CPU index to
  either 31 or 63. Multiple "cpu-map" directives may be specified, but each
  "cpu-map" directive will replace the previous ones when they overlap.

  Ranges can be partially defined. The higher bound can be omitted. In such
  case, it is replaced by the corresponding maximum value, 32 or 64 depending
  on the machine's word size.

  The prefix "auto:" can be added before the thread set to let HAProxy
  automatically bind a set of threads to a CPU by incrementing threads and
  CPU sets. To be valid, both sets must have the same size. No matter the
  declaration order of the CPU sets, it will be bound from the lowest to the
  highest bound. Having both a group and a thread range with the "auto:"
  prefix is not supported. Only one range is supported, the other one must be
  a fixed number.

  Note that group ranges are supported for historical reasons. Nowadays, a lone
  number designates a thread group and must be 1 if thread-groups are not used,
  and specifying a thread range or number requires to prepend "1/" in front of
  it if thread groups are not used. Finally, "1" is strictly equivalent to
  "1/all" and designates all threads in the group.

  Examples:
      cpu-map 1/all 0-3 # bind all threads of the first group on the
                        # first 4 CPUs

      cpu-map 1/1- 0-   # will be replaced by "cpu-map 1/1-64 0-63"
                        # or "cpu-map 1/1-32 0-31" depending on the machine's
                        # word size.

      # all these lines bind thread 1 to the cpu 0, the thread 2 to cpu 1
      # and so on.
      cpu-map auto:1/1-4   0-3
      cpu-map auto:1/1-4   0-1 2-3
      cpu-map auto:1/1-4   3 2 1 0
      cpu-map auto:1/1-4   3,2,1,0

      # bind each thread to exactly one CPU using all/odd/even keyword
      cpu-map auto:1/all   0-63
      cpu-map auto:1/even  0-31
      cpu-map auto:1/odd   32-63

      # invalid cpu-map because thread and CPU sets have different sizes.
      cpu-map auto:1/1-4   0    # invalid
      cpu-map auto:1/1     0-3  # invalid

      # map 40 threads of those 4 groups to individual CPUs
      cpu-map auto:1/1-10   0-9
      cpu-map auto:2/1-10   10-19
      cpu-map auto:3/1-10   20-29
      cpu-map auto:4/1-10   30-39

      # Map 80 threads to one physical socket and 80 others to another socket
      # without forcing assignment. These are split into 4 groups since no
      # group may have more than 64 threads.
      cpu-map 1/1-40   0-39,80-119    # node0, siblings 0 & 1
      cpu-map 2/1-40   0-39,80-119
      cpu-map 3/1-40   40-79,120-159  # node1, siblings 0 & 1
      cpu-map 4/1-40   40-79,120-159


cpu-policy <policy>
  Selects the CPU allocation policy to be used.

  On multi-CPU systems, there can be plenty of reasons for not using all
  available CPU cores, and/or for grouping them into different thread groups,
  for performance, latency, cost, or system-wide resource management. The
  "cpu-set" directive already allows to evict a number of them, but once done,
  it is necessary to decide how to assign the remaining ones to threads and
  thread groups.

  This mapping is normally performed using the "cpu-map" directive, though it
  can be particularly difficult to maintain on heterogeneous systems.

  The "cpu-policy" directive chooses between a small number of allocation
  policies which one to use instead, when "cpu-map" is not used. The following
  policies are currently supported:

   - none               no particular post-selection is performed. All enabled
                        CPUs will be usable, and if the number of threads is
                        not set, it will be set to the number of available CPUs
                        but no more than 32 for 32-bit systems or 64 for 64-bit
                        systems, per thread-group. The number of thread-groups,
                        if not set, will be set to 1.

   - efficiency         exactly like "group-by-ccx" below, except that CPU
                        clusters composed of cores whose performance is more
                        than 25% above that of the next less performant one are
                        evicted. These are typically "big" or "performance"
                        cores. This means that if more than one type of CPU
                        cores are detected, only the efficient one will be
                        used. This can make sense for use with moderate loads
                        when the most powerful cores need to be available to
                        the application or a security component. Some modern
                        CPUs have a large number of such efficient CPU cores
                        which can collectively deliver a decent level of
                        performance while using less power.

   - first-usable-node  if the CPUs were not previously restricted at boot (for
                        example using the "taskset" utility), and if the
                        "nbthread" directive was not set, then the first NUMA
                        node with enabled CPUs will be used, and this number of
                        CPUs will be used as the number of threads. A single
                        thread group will be enabled with all of them, within
                        the limit of 32 or 64 depending on the system. This is
                        the default policy.

   - group-by-2-ccx     same as "group-by-ccx" below but create a group every
                        two CCX. This can make sense on CPUs having many CCX of
                        few cores each, to avoid creating many groups, or to
                        smooth the distribution a little bit when not all cores
                        are in use. Please note that it can have very bad
                        performance effects when the communication between CCX
                        is slow. This is generally recommended against.

   - group-by-2-clusters same as "group-by-cluster" but create a group every
                        two clusters. This can make sense on CPUs having many
                        clusters of few cores each, to avoid creating many
                        groups, or to smooth the distribution a little bit when
                        not all cores are in use. Please note that it can have
                        very bad performance effects when the communication
                        between clusters is slow. This is generally recommended
                        against.

   - group-by-3-ccx     same as "group-by-ccx" below but create a group every
                        three CCX. This can make sense on CPUs having many CCX
                        of few cores each, to avoid creating many groups, or to
                        smooth the distribution a little bit when not all cores
                        are in use. Please note that it can have very bad
                        performance effects when the communication between CCX
                        is slow. This is generally recommended against.

   - group-by-3-clusters same as "group-by-cluster" but create a group every
                        three clusters. This can make sense on CPUs having many
                        clusters of few cores each, to avoid creating many
                        groups, or to smooth the distribution a little bit when
                        not all cores are in use. Please note that it can have
                        very bad performance effects when the communication
                        between clusters is slow. This is generally recommended
                        against.

   - group-by-4-ccx     same as "group-by-ccx" below but create a group every
                        four CCX. This can make sense on CPUs having many CCX
                        of few cores each, to avoid creating many groups, or to
                        smooth the distribution a little bit when not all cores
                        are in use. Please note that it can have very bad
                        performance effects when the communication between CCX
                        is slow. This is generally recommended against.

   - group-by-4-clusters same as "group-by-cluster" but create a group every
                        four clusters. This can make sense on CPUs having many
                        clusters of few cores each, to avoid creating many
                        groups, or to smooth the distribution a little bit when
                        not all cores are in use. Please note that it can have
                        very bad performance effects when the communication
                        between clusters is slow. This is generally recommended
                        against.

   - group-by-ccx       if neither "nbthread" not "nbtgroups" were set, then
                        one thread group is created for each CPU core complex
                        ("CCX") with available CPUs, each with as many threads
                        as CPUs. A CCX groups CPUs having a similarly fast
                        access to the last level cache ("LLC"), typically the
                        L3 cache. On most modern machines, it is critical for
                        performance not to mix CPUs from distant CCX in the
                        same thread group. All threads of a group are then
                        bound to all CPUs of the CCX so that intra-group
                        communications remain local to the CCX without
                        enforcing too strong a binding. The per-group thread
                        limits and thread-group limits are respected. This is
                        recommended on multi-socket and NUMA systems, as well
                        as CPUs with bad inter-CCX latencies.

   - group-by-cluster   if neither "nbthread" not "nbtgroups" were set, then
                        one thread group is created for each CPU cluster with
                        available CPUs, each with as many threads as CPUs. All
                        threads of a group are bound to all CPUs of the cluster
                        so that intra-group communications remain local to the
                        cluster without enforcing too strong a binding. The
                        per-group thread limits and thread-group limits are
                        respected. This is recommended on multi-socket and NUMA
                        systems, as well as CPUs with bad inter-CCX latencies.
                        On most server machines, clusters and CCX are the same,
                        but on heterogenous machines ("performance" vs
                        "efficiency" or "big" vs "little"), a cluster will
                        generally be made of only a part of a CCX composed only
                        of very similar CPUs (same type, +/-5% frequency
                        difference max). The difference is visible on modern
                        laptops and desktop machines used by developers and
                        admins to validate setups.

   - performance        exactly like "group-by-ccx" above, except that CPU
                        clusters composed of cores whose performance is less
                        than 80% of those of the next more performant one are
                        evicted. These are typically "little" or "efficient"
                        cores, whose addition generally doesn't bring significant
                        gains and can easily be counter-productive (e.g. TLS
                        handshakes). Often, keeping such cores for other tasks
                        such as network handling is much more effective. On
                        development systems, these can also be used to run
                        auxiliary tools such as load generators and monitoring
                        tools.

   - resource           this is like "group-by-cluster" above, except that only
                        the smallest and most efficient CPU cluster will be
                        used, while all other ones will be ignored. This can be
                        used to limit the resource usage to the strict minimum
                        that still delivers decent performance, for example to
                        try to further reduce power consumption or minimize the
                        number of cores needed on some rented systems for a
                        sidecar setup, in order to scale the system down more
                        easily. Note that if a single cluster is present, it
                        will still be fully used.

  See also: "cpu-map", "cpu-set", "nbthread"

cpu-set <directive>...
  Allows to symbolically describe what sets of CPUs to run on. The directive
  supports the following keyword:
    - reset              this undoes any previous limitation that could have
                         been inherited by a service manager or a "taskset"
                         command for example.
    - drop-cpu <set>     do not bind to CPUs in this set
    - only-cpu <set>     do not bind to CPUs not in this set
    - drop-node <set>    do not bind to CPUs belonging to this NUMA node
    - only-node <set>    do not bind to CPUs not belonging to this NUMA node
    - drop-cluster <set> do not bind to CPUs on this hardware cluster number
    - only-cluster <set> do not bind to CPUs on other hardware cluster number
    - drop-core <set>    do not bind to CPUs on this hardware core number
    - only-core <set>    do not bind to CPUs on other hardware core number
    - drop-thread <set>  do not bind to CPUs on this hardware thread number
    - only-thread <set>  do not bind to CPUs on other hardware thread number
  See also: "cpu-policy"

crt-base <dir>
  Assigns a default directory to fetch SSL certificates from when a relative
  path is used with "crtfile" or "crt" directives. Absolute locations specified
  prevail and ignore "crt-base".

daemon
  Makes the process fork into background. This is the recommended mode of
  operation. It is equivalent to the command line "-D" argument. It can be
  disabled by the command line "-db" argument. This option is ignored in
  systemd mode.

default-path { current | config | parent | origin <path> }
  By default HAProxy loads all files designated by a relative path from the
  location the process is started in. In some circumstances it might be
  desirable to force all relative paths to start from a different location
  just as if the process was started from such locations. This is what this
  directive is made for. Technically it will perform a temporary chdir() to
  the designated location while processing each configuration file, and will
  return to the original directory after processing each file. It takes an
  argument indicating the policy to use when loading files whose path does
  not start with a slash ('/'):
    - "current" indicates that all relative files are to be loaded from the
      directory the process is started in ; this is the default.

    - "config" indicates that all relative files should be loaded from the
      directory containing the configuration file. More specifically, if the
      configuration file contains a slash ('/'), the longest part up to the
      last slash is used as the directory to change to, otherwise the current
      directory is used. This mode is convenient to bundle maps, errorfiles,
      certificates and Lua scripts together as relocatable packages. When
      multiple configuration files are loaded, the directory is updated for
      each of them.

    - "parent" indicates that all relative files should be loaded from the
      parent of the directory containing the configuration file. More
      specifically, if the configuration file contains a slash ('/'), ".."
      is appended to the longest part up to the last slash is used as the
      directory to change to, otherwise the directory is "..". This mode is
      convenient to bundle maps, errorfiles,  certificates and Lua scripts
      together as relocatable packages, but where each part is located in a
      different subdirectory (e.g. "config/", "certs/", "maps/", ...).

    - "origin" indicates that all relative files should be loaded from the
      designated (mandatory) path. This may be used to ease management of
      different HAProxy instances running in parallel on a system, where each
      instance uses a different prefix but where the rest of the sections are
      made easily relocatable.

  Each "default-path" directive instantly replaces any previous one and will
  possibly result in switching to a different directory. While this should
  always result in the desired behavior, it is really not a good practice to
  use multiple default-path directives, and if used, the policy ought to remain
  consistent across all configuration files.

  Warning: some configuration elements such as maps or certificates are
  uniquely identified by their configured path. By using a relocatable layout,
  it becomes possible for several of them to end up with the same unique name,
  making it difficult to update them at run time, especially when multiple
  configuration files are loaded from different directories. It is essential to
  observe a strict collision-free file naming scheme before adopting relative
  paths. A robust approach could consist in prefixing all files names with
  their respective site name, or in doing so at the directory level.

description <text>
  Add a text that describes the instance.

  Please note that it is required to escape certain characters (# for example)
  and this text is inserted into a html page so you should avoid using
  "<" and ">" characters.

deviceatlas-json-file <path>
  Sets the path of the DeviceAtlas JSON data file to be loaded by the API.
  The path must be a valid JSON data file and accessible by HAProxy process.

deviceatlas-log-level <value>
  Sets the level of information returned by the API. This directive is
  optional and set to 0 by default if not set.

deviceatlas-properties-cookie <name>
  Sets the client cookie's name used for the detection if the DeviceAtlas
  Client-side component was used during the request. This directive is optional
  and set to DAPROPS by default if not set.

deviceatlas-separator <char>
  Sets the character separator for the API properties results. This directive
  is optional and set to | by default if not set.

dns-accept-family <family>[,...]
  By default, DNS resolvers accept both IPv4 and IPv6 addresses. This can be
  influenced by the "resolve-prefer" keywords on server lines as well as the
  family argument to the "do-resolve" action, but that is only a preference,
  which does not block the other family from being used when it's alone. In
  some environments where dual-stack is not usable, stumbling on an unreachable
  IPv6-only DNS record can cause significant trouble as it will replace a
  previous IPv4 one which would possibly have continued to work till next
  request. The "dns-accept-family" global option permits to enforce usage of
  only one (or both) address families. The argument is a comma-delimited list
  of the following words:
    - "ipv4": query and accept IPv4 addresses ("A" records)
    - "ipv6": query and accept IPv6 addresses ("AAAA" records)
    - "auto": use IPv4, and IPv6 if the system has a default gateway for it.
              The result of the last check is cached for 30 seconds.

  When a single family is used, no request will be sent to resolvers for the
  other family, and any response for the othe family will be ignored. The
  default value is "ipv4,ipv6", which effectively enables both families.
  See also: "resolve-prefer", "do-resolve"

expose-deprecated-directives
  This statement must appear before using some directives tagged as deprecated
  to silent warnings and make sure the config file will not be rejected. Not
  all deprecated directives are concerned, only those without any alternative
  solution.

expose-experimental-directives
  This statement must appear before using directives tagged as experimental or
  the config file will be rejected. Please note that features covered by this
  option are not guaranteed to work well and may break during the maintenance
  cycle. Developers will maintain them in best effort mode while the next
  version is being worked on, and will deploy any reasonable effort to avoid
  breaking them but with no guarantee. For these reasons, these features are
  not expected to be supported beyond the release of the next LTS release.
  Users who want to try experimental features are expected to upgrade quickly
  to benefit from the improvements made to that feature.

external-check [preserve-env]
  Allows the use of an external agent to perform health checks. This is
  disabled by default as a security precaution, and even when enabled, checks
  may still fail unless "insecure-fork-wanted" is enabled as well. If the
  program launched makes use of a setuid executable (it should really not),
  you may also need to set "insecure-setuid-wanted" in the global section.
  By default, the checks start with a clean environment which only contains
  variables defined in the "external-check" command in the backend section. It
  may sometimes be desirable to preserve the environment though, for example
  when complex scripts retrieve their extra paths or information there. This
  can be done by appending the "preserve-env" keyword. In this case however it
  is strongly advised not to run a setuid nor as a privileged user, as this
  exposes the check program to potential attacks. See "option external-check",
  and "insecure-fork-wanted", and "insecure-setuid-wanted" for extra details.

fd-hard-limit <number>
  Sets an upper bound to the maximum number of file descriptors that the
  process will use, regardless of system limits. While "ulimit-n" and "maxconn"
  may be used to enforce a value, when they are not set, the process will be
  limited to the hard limit of the RLIMIT_NOFILE setting as reported by
  "ulimit -n -H". But some modern operating systems are now allowing extremely
  large values here (in the order of 1 billion), which will consume way too
  much RAM for regular usage. The fd-hard-limit setting is provided to enforce
  a possibly lower bound to this limit. This means that it will always respect
  the system-imposed limits when they are below <number> but the specified
  value will be used if system-imposed limits are higher. By default
  fd-hard-limit is set to 1048576. This default could be changed via
  DEFAULT_MAXFD compile-time variable, that could serve as the maximum (kernel)
  system limit, if RLIMIT_NOFILE hard limit is extremely large. fd-hard-limit
  set in global section allows to temporarily override the value provided via
  DEFAULT_MAXFD at the build-time. In the example below, no other setting is
  specified and the maxconn value will automatically adapt to the lower of
  "fd-hard-limit" and the RLIMIT_NOFILE limit:

      global
          # use as many FDs as possible but no more than 50000
          fd-hard-limit 50000

  See also: ulimit-n, maxconn

gid <number>
  Changes the process's group ID to <number>. It is recommended that the group
  ID is dedicated to HAProxy or to a small set of similar daemons. HAProxy must
  be started with a user belonging to this group, or with superuser privileges.
  Note that if HAProxy is started from a user having supplementary groups, it
  will only be able to drop these groups if started with superuser privileges.
  See also "group" and "uid".

grace <time>
  Defines a delay between SIGUSR1 and real soft-stop.

  Arguments :
    <time>  is an extra delay (by default in milliseconds) after receipt of the
            SIGUSR1 signal that will be waited for before proceeding with the
            soft-stop operation.

  This is used for compatibility with legacy environments where the haproxy
  process needs to be stopped but some external components need to detect the
  status before listeners are unbound. The principle is that the internal
  "stopping" variable (which is reported by the "stopping" sample fetch
  function) will be turned to true, but listeners will continue to accept
  connections undisturbed, until the delay expires, after what the regular
  soft-stop will proceed. This must not be used with processes that are
  reloaded, or this will prevent the old process from unbinding, and may
  prevent the new one from starting, or simply cause trouble.

  Example:

    global
      grace 10s

    # Returns 200 OK until stopping is set via SIGUSR1
    frontend ext-check
      bind :9999
      monitor-uri /ext-check
      monitor fail if { stopping }

  Please note that a more flexible and durable approach would instead consist
  for an orchestration system in setting a global variable from the CLI, use
  that variable to respond to external checks, then after a delay send the
  SIGUSR1 signal.

  Example:

    # Returns 200 OK until proc.stopping is set to non-zero. May be done
    # from HTTP using set-var(proc.stopping) or from the CLI using:
    # > set var proc.stopping int(1)
    frontend ext-check
      bind :9999
      monitor-uri /ext-check
      monitor fail if { var(proc.stopping) -m int gt 0 }

  See also: hard-stop-after, monitor

group <group name>
  Similar to "gid" but uses the GID of group name <group name> from /etc/group.
  See also "gid" and "user".

h1-accept-payload-with-any-method
  Does not reject HTTP/1.0 GET/HEAD/DELETE requests with a payload with a
  413 Payload Too Large HTTP response.

  While It is explicitly allowed in HTTP/1.1, HTTP/1.0 is not clear on this
  point and some old servers don't expect any payload and never look for body
  length (via Content-Length or Transfer-Encoding headers). It means that some
  intermediaries may properly handle the payload for HTTP/1.0 GET/HEAD/DELETE
  requests, while some others may totally ignore it. That may lead to security
  issues because a request smuggling attack is possible. Thus, by default,
  HAProxy rejects HTTP/1.0 GET/HEAD/DELETE requests with a payload.

  However, it may be an issue with some old clients. In this case, this global
  option may be set.

h1-do-not-close-on-insecure-transfer-encoding
  As mandated by the HTTP/1.1 specification (RFC9112#6.1), the presence of both
  a Transfer-Encoding header field and a Content-Length header field in the
  same message represents a serious risk of conveying a content smuggling
  attack if there are any HTTP/1.0 agent anywhere in the upstream of downstream
  chain, and when facing this, an agent must absolutely close the connection
  after the response so as to prevent any exploitation. But this may have a
  performance impact on some very old clients, especially if they need to
  renegotiate a TLS connection for every request. This option is present to
  ask HAProxy not to enforce this rule, and to just sanitize the message but
  leave the connection alive after the response. This may only be done when
  absolutely certain that no HTTP/1.0 agents are present in the chain and that
  all implementations before HAProxy are fully HTTP/1.1 compliant regarding the
  rules that apply to these header fields. In any case, HAProxy will continue
  to ignore and drop the extraneous Content-Length header so as not to confuse
  the next hop.

  When enabling this option to work around an old broken client or server, it
  is important to understand that regardless of the need or not for this
  option, such an agent violating this rule faces a risk to see its messages
  truncated by old agents that would consider Content-Length and ignore
  Transfer-Encoding, since the cumulated size of the encoded chunk sizes are
  not being accounted for. As such, the rule above is not just a matter of
  security but also of taking care of getting rid of agents that may face
  communication trouble due to incompatibilities with older ones.

h1-case-adjust <from> <to>
  Defines the case adjustment to apply, when enabled, to the header name
  <from>, to change it to <to> before sending it to HTTP/1 clients or
  servers. <from> must be in lower case, and <from> and <to> must not differ
  except for their case. It may be repeated if several header names need to be
  adjusted. Duplicate entries are not allowed. If a lot of header names have to
  be adjusted, it might be more convenient to use "h1-case-adjust-file".
  Please note that no transformation will be applied unless "option
  h1-case-adjust-bogus-client" or "option h1-case-adjust-bogus-server" is
  specified in a proxy.

  There is no standard case for header names because, as stated in RFC7230,
  they are case-insensitive. So applications must handle them in a case-
  insensitive manner. But some bogus applications violate the standards and
  erroneously rely on the cases most commonly used by browsers. This problem
  becomes critical with HTTP/2 because all header names must be exchanged in
  lower case, and HAProxy follows the same convention. All header names are
  sent in lower case to clients and servers, regardless of the HTTP version.

  Applications which fail to properly process requests or responses may require
  to temporarily use such workarounds to adjust header names sent to them for
  the time it takes the application to be fixed. Please note that an
  application which requires such workarounds might be vulnerable to content
  smuggling attacks and must absolutely be fixed.

  Example:
    global
      h1-case-adjust content-length Content-Length

  See "h1-case-adjust-file", "option h1-case-adjust-bogus-client" and
  "option h1-case-adjust-bogus-server".

h1-case-adjust-file <hdrs-file>
  Defines a file containing a list of key/value pairs used to adjust the case
  of some header names before sending them to HTTP/1 clients or servers. The
  file <hdrs-file> must contain 2 header names per line. The first one must be
  in lower case and both must not differ except for their case. Lines which
  start with '#' are ignored, just like empty lines. Leading and trailing tabs
  and spaces are stripped. Duplicate entries are not allowed. Please note that
  no transformation will be applied unless "option h1-case-adjust-bogus-client"
  or "option h1-case-adjust-bogus-server" is specified in a proxy.

  If this directive is repeated, only the last one will be processed.  It is an
  alternative to the directive "h1-case-adjust" if a lot of header names need
  to be adjusted. Please read the risks associated with using this.

  See "h1-case-adjust", "option h1-case-adjust-bogus-client" and
  "option h1-case-adjust-bogus-server".

h2-workaround-bogus-websocket-clients
  This disables the announcement of the support for h2 websockets to clients.
  This can be use to overcome clients which have issues when implementing the
  relatively fresh RFC8441, such as Firefox 88. To allow clients to
  automatically downgrade to http/1.1 for the websocket tunnel, specify h2
  support on the bind line using "alpn" without an explicit "proto" keyword. If
  this statement was previously activated, this can be disabled by prefixing
  the keyword with "no'.

hard-stop-after <time>
  Defines the maximum time allowed to perform a clean soft-stop.

  Arguments :
    <time>  is the maximum time (by default in milliseconds) for which the
            instance will remain alive when a soft-stop is received via the
            SIGUSR1 signal.

  This may be used to ensure that the instance will quit even if connections
  remain opened during a soft-stop (for example with long timeouts for a proxy
  in tcp mode). It applies both in TCP and HTTP mode.

  Example:
    global
      hard-stop-after 30s

  See also: grace

harden.reject-privileged-ports.tcp { on | off }
harden.reject-privileged-ports.quic { on | off }
  Toggle per protocol protection which forbid communication with clients which
  use privileged ports as their source port. This range of ports is defined
  according to RFC 6335. By default, protection is active for QUIC protocol as
  this behavior is suspicious and may be used as a spoofing or DNS/NTP
  amplification attack.

http-err-codes [+-]<range>[,...] [...]
  Replace, reduce or extend the list of status codes that define an error as
  considered by the termination codes and the "http_err_cnt" counter in stick
  tables. The default range for errors is 400 to 499, but in certain contexts
  some users prefer to exclude specific codes, especially when tracking client
  errors (e.g. 404 on systems with dynamically generated contents). See also
  "http-fail-codes" and "http_err_cnt".

  A range specified without '+' nor '-' redefines the existing range to the new
  one. A range starting with '+' extends the existing range to also include the
  specified one, which may or may not overlap with the existing one. A range
  starting with '-' removes the specified range from the existing one. A range
  consists in a number from 100 to 599, optionally followed by "-" followed by
  another number greater than or equal to the first one to indicate the high
  boundary of the range. Multiple ranges may be delimited by commas for a same
  add/del/ replace operation.

  Example:
     http-err-codes 400,402-444,446-480,490   # sets exactly these codes
     http-err-codes 400-499 -450 +500         # sets 400 to 500 except 450
     http-err-codes -450-459                  # removes 450 to 459 from range
     http-err-codes +501,505                  # adds 501 and 505 to range

http-fail-codes [+-]<range>[,...] [...]
  Replace, reduce or extend the list of status codes that define a failure as
  considered by the termination codes and the "http_fail_cnt" counter in stick
  tables. The default range for failures is 500 to 599 except 501 and 505 which
  can be triggered by clients, and normally indicate a failure from the server
  to process the request. Some users prefer to exclude certain codes in certain
  contexts where it is known they're not relevant, such as 500 in certain SOAP
  environments as it doesn't translate a server fault there. The syntax is
  exactly the same as for http-err-codes above. See also "http-err-codes" and
  "http_fail_cnt".

insecure-fork-wanted
  By default HAProxy tries hard to prevent any thread and process creation
  after it starts. Doing so is particularly important when using Lua files of
  uncertain origin, and when experimenting with development versions which may
  still contain bugs whose exploitability is uncertain. And generally speaking
  it's good hygiene to make sure that no unexpected background activity can be
  triggered by traffic. But this prevents external checks from working, and may
  break some very specific Lua scripts which actively rely on the ability to
  fork. This option is there to disable this protection. Note that it is a bad
  idea to disable it, as a vulnerability in a library or within HAProxy itself
  will be easier to exploit once disabled. In addition, forking from Lua or
  anywhere else is not reliable as the forked process may randomly embed a lock
  set by another thread and never manage to finish an operation. As such it is
  highly recommended that this option is never used and that any workload
  requiring such a fork be reconsidered and moved to a safer solution (such as
  agents instead of external checks). This option supports the "no" prefix to
  disable it. This can also be activated with "-dI" on the haproxy command
  line.

insecure-setuid-wanted
  HAProxy doesn't need to call executables at run time (except when using
  external checks which are strongly recommended against), and is even expected
  to isolate itself into an empty chroot. As such, there basically is no valid
  reason to allow a setuid executable to be called without the user being fully
  aware of the risks. In a situation where HAProxy would need to call external
  checks and/or disable chroot, exploiting a vulnerability in a library or in
  HAProxy itself could lead to the execution of an external program. On Linux
  it is possible to lock the process so that any setuid bit present on such an
  executable is ignored. This significantly reduces the risk of privilege
  escalation in such a situation. This is what HAProxy does by default. In case
  this causes a problem to an external check (for example one which would need
  the "ping" command), then it is possible to disable this protection by
  explicitly adding this directive in the global section. If enabled, it is
  possible to turn it back off by prefixing it with the "no" keyword.

issuers-chain-path <dir>
  Assigns a directory to load certificate chain for issuer completion. All
  files must be in PEM format. For certificates loaded with "crt" or "crt-list",
  if certificate chain is not included in PEM (also commonly known as
  intermediate certificate), HAProxy will complete chain if the issuer of the
  certificate corresponds to the first certificate of the chain loaded with
  "issuers-chain-path".
  A "crt" file with PrivateKey+Certificate+IntermediateCA2+IntermediateCA1
  could be replaced with PrivateKey+Certificate. HAProxy will complete the
  chain if a file with IntermediateCA2+IntermediateCA1 is present in
  "issuers-chain-path" directory. All other certificates with the same issuer
  will share the chain in memory.

  The OCSP features are able to use the completed chain when no .issuer was
  used, or no chain was provided in the PEM.

key-base <dir>
  Assigns a default directory to fetch SSL private keys from when a relative
  path is used with "key" directives. Absolute locations specified prevail and
  ignore "key-base". This option only works with a crt-store load line.

limited-quic
  This setting must be used to explicitly enable the QUIC listener bindings when
  haproxy is compiled against a TLS/SSL stack without QUIC support, typically
  OpenSSL. It has no effect when haproxy is compiled against a TLS/SSL stack
  with QUIC support, quictls for instance. Note that QUIC 0-RTT is not supported
  when this setting is set.

localpeer <name>
  Sets the local instance's peer name. It will be ignored if the "-L"
  command line argument is specified or if used after "peers" section
  definitions. In such cases, a warning message will be emitted during
  the configuration parsing.

  This option will also set the HAPROXY_LOCALPEER environment variable.
  See also "-L" in the management guide and "peers" section below.

log <target> [len <length>] [format <format>] [sample <ranges>:<sample_size>]
    [profile <prof>] <facility> [max level [min level]]
  Adds a global syslog server. Several global servers can be defined. They
  will receive logs for starts and exits, as well as all logs from proxies
  configured with "log global". See "log" option for proxies for more details.

log-send-hostname [<string>]
  Sets the hostname field in the syslog header. If optional "string" parameter
  is set the header is set to the string contents, otherwise uses the hostname
  of the system. Generally used if one is not relaying logs through an
  intermediate syslog server or for simply customizing the hostname printed in
  the logs.

log-tag <string>
  Sets the tag field in the syslog header to this string. It defaults to the
  program name as launched from the command line, which usually is "haproxy".
  Sometimes it can be useful to differentiate between multiple processes
  running on the same host. See also the per-proxy "log-tag" directive.

lua-load <file> [ <arg1> [ <arg2> [ ... ] ] ]
  This global directive loads and executes a Lua file in the shared context
  that is visible to all threads. Any variable set in such a context is visible
  from any thread. This is the easiest and recommended way to load Lua programs
  but it will not scale well if a lot of Lua calls are performed, as only one
  thread may be running on the global state at a time. A program loaded this
  way will always see 0 in the "core.thread" variable. This directive can be
  used multiple times.

  args are available in the lua file using the code below in the body of the
  file. Do not forget that Lua arrays start at index 1. A "local" variable
  declared in a file is available in the entire file and not available on
  other files.

     local args = table.pack(...)

lua-load-per-thread <file> [ <arg1> [ <arg2> [ ... ] ] ]
  This global directive loads and executes a Lua file into each started thread.
  Any global variable has a thread-local visibility so that each thread could
  see a different value. As such it is strongly recommended not to use global
  variables in programs loaded this way. An independent copy is loaded and
  initialized for each thread, everything is done sequentially and in the
  thread's numeric order from 1 to nbthread. If some operations need to be
  performed only once, the program should check the "core.thread" variable to
  figure what thread is being initialized. Programs loaded this way will run
  concurrently on all threads and will be highly scalable. This is the
  recommended way to load simple functions that register sample-fetches,
  converters, actions or services once it is certain the program doesn't depend
  on global variables. For the sake of simplicity, the directive is available
  even if only one thread is used and even if threads are disabled (in which
  case it will be equivalent to lua-load). This directive can be used multiple
  times.

  See lua-load for usage of args.

lua-prepend-path <string> [<type>]
  Prepends the given string followed by a semicolon to Lua's package.<type>
  variable.
  <type> must either be "path" or "cpath". If <type> is not given it defaults
  to "path".

  Lua's paths are semicolon delimited lists of patterns that specify how the
  `require` function attempts to find the source file of a library. Question
  marks (?) within a pattern will be replaced by module name. The path is
  evaluated left to right. This implies that paths that are prepended later
  will be checked earlier.

  As an example by specifying the following path:

    lua-prepend-path /usr/share/haproxy-lua/?/init.lua
    lua-prepend-path /usr/share/haproxy-lua/?.lua

  When `require "example"` is being called Lua will first attempt to load the
  /usr/share/haproxy-lua/example.lua script, if that does not exist the
  /usr/share/haproxy-lua/example/init.lua will be attempted and the default
  paths if that does not exist either.

  See https://www.lua.org/pil/8.1.html for the details within the Lua
  documentation.

master-worker [no-exit-on-failure]
  Master-worker mode. It is equivalent to the command line "-W" argument.

  This mode will launch a "master" which will fork a "worker" after reading the
  configuration to process the traffic. The master is used as a process manager
  which will monitor the "workers".

  Using this mode, you can reload HAProxy directly by sending a SIGUSR2 signal
  to the master. Reloading will ask the master to read the configuration again
  and fork a new worker. The previous worker will be kept until the end of its
  jobs.

  The master-worker mode is compatible either with the foreground or daemon
  mode.

  By default, if a worker exits with a bad return code, in the case of a
  segfault for example, all workers will be killed, and the master will leave.
  It is convenient to combine this behavior with Restart=on-failure in a
  systemd unit file in order to relaunch the whole process. If you don't want
  this behavior, you must use the keyword "no-exit-on-failure".

  See also "-W" in the management guide.

mworker-max-reloads <number>
  In master-worker mode, this option limits the number of time a worker can
  survive to a reload. If the worker did not leave after a reload, once its
  number of reloads is greater than this number, the worker will receive a
  SIGTERM. This option helps to keep under control the number of workers.
  See also "show proc" in the Management Guide.

nbthread <number>
  This setting is only available when support for threads was built in. It
  makes HAProxy run on <number> threads. "nbthread" also works when HAProxy is
  started in foreground. On some platforms supporting CPU affinity, the default
  "nbthread" value is automatically set to the number of CPUs the process is
  bound to upon startup. This means that the thread count can easily be
  adjusted from the calling process using commands like "taskset" or "cpuset".
  Otherwise, this value defaults to 1. The default value is reported in the
  output of "haproxy -vv". Note that values set here or automatically detected
  are subject to the limit set by "thread-hard-limit" (if set).

no-quic
  Disable QUIC transport protocol. All the QUIC listeners will still be created.
  But they will not bind their addresses. Hence, no QUIC traffic will be
  processed by haproxy. See also "quic_enabled" sample fetch.

numa-cpu-mapping
  When running on a NUMA-aware platform with the cpu-policy is set to
  "first-usable-node" (the default one), HAProxy inspects on startup the CPU
  topology of the machine. If a multi-socket machine is detected, the affinity
  is automatically calculated to run on the CPUs of a single node. This is done
  in order to not suffer from the performance penalties caused by the
  inter-socket bus latency. However, if the applied binding is non optimal on a
  particular architecture, it can be disabled with the statement 'no
  numa-cpu-mapping'. This automatic binding is also not applied if a nbthread
  statement is present in the configuration, if the affinity of the process is
  already specified, for example via the 'cpu-map' directive or the taskset
  utility, or if the cpu-policy is set to any other value. See also "cpu-map",
  "cpu-policy", "cpu-set".

ocsp-update.disable [ on | off ]
  Disable completely the ocsp-update in HAProxy. Any ocsp-update configuration
  will be ignored. Default is "off".
  See option "ocsp-update" for more information about the auto update
  mechanism.

ocsp-update.httpproxy <address>[:port]
  Allow to use an HTTP proxy for the OCSP updates. This only works with HTTP,
  HTTPS is not supported. This option will allow the OCSP updater to send
  absolute URI in the request to the proxy.

ocsp-update.maxdelay <number>
tune.ssl.ocsp-update.maxdelay <number> (deprecated)
  Sets the maximum interval between two automatic updates of the same OCSP
  response. This time is expressed in seconds and defaults to 3600 (1 hour). It
  must be set to a higher value than "ocsp-update.mindelay". See
  option "ocsp-update" for more information about the auto update mechanism.

ocsp-update.mindelay <number>
tune.ssl.ocsp-update.mindelay <number> (deprecated)
  Sets the minimum interval between two automatic updates of the same OCSP
  response. This time is expressed in seconds and defaults to 300 (5 minutes).
  It is particularly useful for OCSP response that do not have explicit
  expiration times. It must be set to a lower value than
  "ocsp-update.maxdelay". See option "ocsp-update" for more
  information about the auto update mechanism.

ocsp-update.mode [ on | off ]
  Sets the default ocsp-update mode for all certificates used in the
  configuration. This global option can be superseded by the crt-list
  "ocsp-update" option. This option is set to "off" by default.
  See option "ocsp-update" for more information about the auto update
  mechanism.

pidfile <pidfile>
  Writes PIDs of all daemons into file <pidfile> when daemon mode or writes PID
  of master process into file <pidfile> when master-worker mode. This option is
  equivalent to the "-p" command line argument. The file must be accessible to
  the user starting the process. See also "daemon" and "master-worker".

pp2-never-send-local
  A bug in the PROXY protocol v2 implementation was present in HAProxy up to
  version 2.1, causing it to emit a PROXY command instead of a LOCAL command
  for health checks. This is particularly minor but confuses some servers'
  logs. Sadly, the bug was discovered very late and revealed that some servers
  which possibly only tested their PROXY protocol implementation against
  HAProxy fail to properly handle the LOCAL command, and permanently remain in
  the "down" state when HAProxy checks them. When this happens, it is possible
  to enable this global option to revert to the older (bogus) behavior for the
  time it takes to contact the affected components' vendors and get them fixed.
  This option is disabled by default and acts on all servers having the
  "send-proxy-v2" statement.

presetenv <name> <value>
  Sets environment variable <name> to value <value>. If the variable exists, it
  is NOT overwritten. The changes immediately take effect so that the next line
  in the configuration file sees the new value. See also "setenv", "resetenv",
  and "unsetenv".

prealloc-fd
  Performs a one-time open of the maximum file descriptor which results in a
  pre-allocation of the kernel's data structures. This prevents short pauses
  when nbthread>1 and HAProxy opens a file descriptor which requires the kernel
  to expand its data structures.

resetenv [<name> ...]
  Removes all environment variables except the ones specified in argument. It
  allows to use a clean controlled environment before setting new values with
  setenv or unsetenv. Please note that some internal functions may make use of
  some environment variables, such as time manipulation functions, but also
  OpenSSL or even external checks. This must be used with extreme care and only
  after complete validation. The changes immediately take effect so that the
  next line in the configuration file sees the new environment. See also
  "setenv", "presetenv", and "unsetenv".

server-state-base <directory>
  Specifies the directory prefix to be prepended in front of all servers state
  file names which do not start with a '/'. See also "server-state-file",
  "load-server-state-from-file" and "server-state-file-name".

server-state-file <file>
  Specifies the path to the file containing state of servers. If the path starts
  with a slash ('/'), it is considered absolute, otherwise it is considered
  relative to the directory specified using "server-state-base" (if set) or to
  the current directory. Before reloading HAProxy, it is possible to save the
  servers' current state using the stats command "show servers state". The
  output of this command must be written in the file pointed by <file>. When
  starting up, before handling traffic, HAProxy will read, load and apply state
  for each server found in the file and available in its current running
  configuration. See also "server-state-base" and "show servers state",
  "load-server-state-from-file" and "server-state-file-name"

set-dumpable
  This option is better left disabled by default and enabled only upon a
  developer's request. If it has been enabled, it may still be forcibly
  disabled by prefixing it with the "no" keyword. It has no impact on
  performance nor stability but will try hard to re-enable core dumps that were
  possibly disabled by file size limitations (ulimit -f), core size limitations
  (ulimit -c), or "dumpability" of a process after changing its UID/GID (such
  as /proc/sys/fs/suid_dumpable on Linux). Core dumps might still be limited by
  the current directory's permissions (check what directory the file is started
  from), the chroot directory's permission (it may be needed to temporarily
  disable the chroot directive or to move it to a dedicated writable location),
  or any other system-specific constraint. For example, some Linux flavours are
  notorious for replacing the default core file with a path to an executable
  not even installed on the system (check /proc/sys/kernel/core_pattern). Often,
  simply writing "core", "core.%p" or "/var/log/core/core.%p" addresses the
  issue. When trying to enable this option waiting for a rare issue to
  re-appear, it's often a good idea to first try to obtain such a dump by
  issuing, for example, "kill -11" to the "haproxy" process and verify that it
  leaves a core where expected when dying.

set-var <var-name> <expr>
  Sets the process-wide variable '<var-name>' to the result of the evaluation
  of the sample expression <expr>. The variable '<var-name>' may only be a
  process-wide variable (using the 'proc.' prefix). It works exactly like the
  'set-var' action in TCP or HTTP rules except that the expression is evaluated
  at configuration parsing time and that the variable is instantly set. The
  sample fetch functions and converters permitted in the expression are only
  those using internal data, typically 'int(value)' or 'str(value)'. It is
  possible to reference previously allocated variables as well. These variables
  will then be readable (and modifiable) from the regular rule sets.

  Example:
      global
          set-var proc.current_state str(primary)
          set-var proc.prio int(100)
          set-var proc.threshold int(200),sub(proc.prio)

set-var-fmt <var-name> <fmt>
  Sets the process-wide variable '<var-name>' to the string resulting from the
  evaluation of the log-format <fmt>. The variable '<var-name>' may only be a
  process-wide variable (using the 'proc.' prefix). It works exactly like the
  'set-var-fmt' action in TCP or HTTP rules except that the expression is
  evaluated at configuration parsing time and that the variable is instantly
  set. The sample fetch functions and converters permitted in the expression
  are only those using internal data, typically 'int(value)' or 'str(value)'.
  It is possible to reference previously allocated variables as well. These
  variables will then be readable (and modifiable) from the regular rule sets.
  Please see section 8.2.6 for details on the Custom log format syntax.

  Example:
      global
          set-var-fmt proc.current_state "primary"
          set-var-fmt proc.bootid        "%pid|%t"

setcap <name>[,<name>...]
  Sets a list of capabilities that must be preserved when starting and running
  either as a non-root user (uid > 0), or when starting with uid 0 (root)
  and switching then to a non-root. By default all permissions are
  lost by the uid switch, but some are often needed when trying to connect to
  a server from a foreign address during transparent proxying, or when binding
  to a port below 1024, e.g. when using "tune.quic.socket-owner connection",
  resulting in setups running entirely under uid 0. Setting capabilities
  generally is a safer alternative, as only the required capabilities will be
  preserved. The feature is OS-specific and only enabled on Linux when
  USE_LINUX_CAP=1 is set at build time. The list of supported capabilities also
  depends on the OS and is enumerated by the error message displayed when an
  invalid capability name or an empty one is passed. Multiple capabilities may
  be passed, delimited by commas. Among those commonly used, "cap_net_raw"
  allows to transparently bind to a foreign address, and "cap_net_bind_service"
  allows to bind to a privileged port and may be used by QUIC. If the process
  is started and run under the same non-root user, needed capabilities should
  be set on haproxy binary file with setcap along with this keyword. For more
  details about setting capabilities on haproxy binary, please see chapter
  13.1 Linux capabilities support in the Management guide.

  Example:
      global
          setcap cap_net_bind_service,cap_net_admin

setenv <name> <value>
  Sets environment variable <name> to value <value>. If the variable exists, it
  is overwritten. The changes immediately take effect so that the next line in
  the configuration file sees the new value. See also "presetenv", "resetenv",
  and "unsetenv".

ssl-default-bind-ciphers <ciphers>
  This setting is only available when support for OpenSSL was built in. It sets
  the default string describing the list of cipher algorithms ("cipher suite")
  that are negotiated during the SSL/TLS handshake up to TLSv1.2 for all
  "bind" lines which do not explicitly define theirs. The format of the string
  is defined in "man 1 ciphers" from OpenSSL man pages. For background
  information and recommendations see e.g.
  (https://wiki.mozilla.org/Security/Server_Side_TLS) and
  (https://mozilla.github.io/server-side-tls/ssl-config-generator/). For TLSv1.3
  cipher configuration, please check the "ssl-default-bind-ciphersuites" keyword.
  Please check the "bind" keyword for more information.

ssl-default-bind-ciphersuites <ciphersuites>
  This setting is only available when support for OpenSSL was built in and
  OpenSSL 1.1.1 or later was used to build HAProxy. It sets the default string
  describing the list of cipher algorithms ("cipher suite") that are negotiated
  during the TLSv1.3 handshake for all "bind" lines which do not explicitly define
  theirs. The format of the string is defined in
  "man 1 ciphers" from OpenSSL man pages under the section "ciphersuites". For
  cipher configuration for TLSv1.2 and earlier, please check the
  "ssl-default-bind-ciphers" keyword. This setting might accept TLSv1.2
  ciphersuites however this is an undocumented behavior and not recommended as
  it could be inconsistent or buggy.
  The default TLSv1.3 ciphersuites of OpenSSL are:
  "TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256"

  TLSv1.3 only supports 5 ciphersuites:

  - TLS_AES_128_GCM_SHA256
  - TLS_AES_256_GCM_SHA384
  - TLS_CHACHA20_POLY1305_SHA256
  - TLS_AES_128_CCM_SHA256
  - TLS_AES_128_CCM_8_SHA256

  Please check the "bind" keyword for more information.

  Example:
      global
          ssl-default-bind-ciphers ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-RSA-AES128-GCM-SHA256
          ssl-default-bind-ciphersuites TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256

ssl-default-bind-client-sigalgs <sigalgs>
  This setting is only available when support for OpenSSL was built in. It sets
  the default string describing the list of signature algorithms related to
  client authentication for all "bind" lines which do not explicitly define
  theirs. The format of the string is a colon-delimited list of signature
  algorithms. Each signature algorithm can use one of two forms: TLS1.3 signature
  scheme names ("rsa_pss_rsae_sha256") or the public key algorithm + digest form
  ("ECDSA+SHA256"). A list can contain both forms. For more information on the
  format, see SSL_CTX_set1_client_sigalgs(3). A list of signature algorithms is
  also available in RFC8446 section 4.2.3 and in OpenSSL in the ssl/t1_lib.c
  file.  This setting is not applicable to TLSv1.1 and earlier versions of the
  protocol as the signature algorithms aren't separately negotiated in these
  versions. It is not recommended to change this setting unless compatibility
  with a middlebox is required.

ssl-default-bind-curves <curves>
  This setting is only available when support for OpenSSL was built in. It sets
  the default string describing the list of elliptic curves algorithms ("curve
  suite") that are negotiated during the SSL/TLS handshake with ECDHE. The format
  of the string is a colon-delimited list of curve name.
  Please check the "bind" keyword for more information.

ssl-default-bind-options [<option>]...
  This setting is only available when support for OpenSSL was built in. It sets
  default ssl-options to force on all "bind" lines. Please check the "bind"
  keyword to see available options.

  Example:
        global
           ssl-default-bind-options ssl-min-ver TLSv1.0 no-tls-tickets

ssl-default-bind-sigalgs <sigalgs>
  This setting is only available when support for OpenSSL was built in. It
  sets the default string describing the list of signature algorithms that
  are negotiated during the TLSv1.2 and TLSv1.3 handshake for all "bind" lines
  which do not explicitly define theirs. The format of the string is a
  colon-delimited list of signature algorithms. Each signature algorithm can
  use one of two forms: TLS1.3 signature scheme names ("rsa_pss_rsae_sha256")
  or the public key algorithm + digest form ("ECDSA+SHA256"). A list
  can contain both forms. For more information on the format,
  see SSL_CTX_set1_sigalgs(3). A list of signature algorithms is also
  available in RFC8446 section 4.2.3 and in OpenSSL in the ssl/t1_lib.c file.
  This setting is not applicable to TLSv1.1 and earlier versions of the
  protocol as the signature algorithms aren't separately negotiated in these
  versions. It is not recommended to change this setting unless compatibility
  with a middlebox is required.

ssl-default-server-ciphers <ciphers>
  This setting is only available when support for OpenSSL was built in. It
  sets the default string describing the list of cipher algorithms that are
  negotiated during the SSL/TLS handshake up to TLSv1.2 with the server,
  for all "server" lines which do not explicitly define theirs. The format of
  the string is defined in "man 1 ciphers" from OpenSSL man pages. For background
  information and recommendations see e.g.
  (https://wiki.mozilla.org/Security/Server_Side_TLS) and
  (https://mozilla.github.io/server-side-tls/ssl-config-generator/).
  For TLSv1.3 cipher configuration, please check the
  "ssl-default-server-ciphersuites" keyword. Please check the "server" keyword
  for more information.

ssl-default-server-ciphersuites <ciphersuites>
  This setting is only available when support for OpenSSL was built in and
  OpenSSL 1.1.1 or later was used to build HAProxy. It sets the default
  string describing the list of cipher algorithms that are negotiated during
  the TLSv1.3 handshake with the server, for all "server" lines which do not
  explicitly define theirs. The format of the string is defined in
  "man 1 ciphers" from OpenSSL man pages under the section "ciphersuites". For
  cipher configuration for TLSv1.2 and earlier, please check the
  "ssl-default-server-ciphers" keyword. Please check the "server" keyword for
  more information.

ssl-default-server-client-sigalgs <sigalgs>
  This setting is only available when support for OpenSSL was built in. It sets
  the default string describing the list of signature algorithms related to
  client authentication for all "server" lines which do not explicitly define
  theirs. The format of the string is a colon-delimited list of signature
  algorithms. Each signature algorithm can use one of two forms: TLS1.3 signature
  scheme names ("rsa_pss_rsae_sha256") or the public key algorithm + digest form
  ("ECDSA+SHA256"). A list can contain both forms. For more information on the
  format, see SSL_CTX_set1_client_sigalgs(3). A list of signature algorithms is
  also available in RFC8446 section 4.2.3 and in OpenSSL in the ssl/t1_lib.c
  file.  This setting is not applicable to TLSv1.1 and earlier versions of the
  protocol as the signature algorithms aren't separately negotiated in these
  versions. It is not recommended to change this setting unless compatibility
  with a middlebox is required.

ssl-default-server-curves <curves>
  This setting is only available when support for OpenSSL was built in. It sets
  the default string describing the list of elliptic curves algorithms ("curve
  suite") that are negotiated during the SSL/TLS handshake with ECDHE. The format
  of the string is a colon-delimited list of curve name.
  Please check the "server" keyword for more information.

ssl-default-server-options [<option>]...
  This setting is only available when support for OpenSSL was built in. It sets
  default ssl-options to force on all "server" lines. Please check the "server"
  keyword to see available options.

ssl-default-server-sigalgs <sigalgs>
  This setting is only available when support for OpenSSL was built in. It
  sets the default string describing the list of signature algorithms that
  are negotiated during the TLSv1.2 and TLSv1.3 handshake for all "server" lines
  which do not explicitly define theirs. The format of the string is a
  colon-delimited list of signature algorithms. Each signature algorithm can
  use one of two forms: TLS1.3 signature scheme names ("rsa_pss_rsae_sha256")
  or the public key algorithm + digest form ("ECDSA+SHA256"). A list
  can contain both forms. For more information on the format,
  see SSL_CTX_set1_sigalgs(3). A list of signature algorithms is also
  available in RFC8446 section 4.2.3 and in OpenSSL in the ssl/t1_lib.c file.
  This setting is not applicable to TLSv1.1 and earlier versions of the
  protocol as the signature algorithms aren't separately negotiated in these
  versions. It is not recommended to change this setting unless compatibility
  with a middlebox is required.

ssl-dh-param-file <file>
  This setting is only available when support for OpenSSL was built in. It sets
  the default DH parameters that are used during the SSL/TLS handshake when
  ephemeral Diffie-Hellman (DHE) key exchange is used, for all "bind" lines
  which do not explicitly define theirs. It will be overridden by custom DH
  parameters found in a bind certificate file if any. If custom DH parameters
  are not specified either by using ssl-dh-param-file or by setting them
  directly in the certificate file, DHE ciphers will not be used, unless
  tune.ssl.default-dh-param is set. In this latter case, pre-defined DH
  parameters of the specified size will be used. Custom parameters are known to
  be more secure and therefore their use is recommended.
  Custom DH parameters may be generated by using the OpenSSL command
  "openssl dhparam <size>", where size should be at least 2048, as 1024-bit DH
  parameters should not be considered secure anymore.

ssl-propquery <query>
  This setting is only available when support for OpenSSL was built in and when
  OpenSSL's version is at least 3.0. It allows to define a default property
  string used when fetching algorithms in providers. It behave the same way as
  the openssl propquery option and it follows the same syntax (described in
  https://www.openssl.org/docs/man3.0/man7/property.html). For instance, if you
  have two providers loaded, the foo one and the default one, the propquery
  "?provider=foo" allows to pick the algorithm implementations provided by the
  foo provider by default, and to fallback on the default provider's one if it
  was not found.

ssl-provider <name>
  This setting is only available when support for OpenSSL was built in and when
  OpenSSL's version is at least 3.0. It allows to load a provider during init.
  If loading is successful, any capabilities provided by the loaded provider
  might be used by HAProxy. Multiple 'ssl-provider' options can be specified in
  a configuration file. The providers will be loaded in their order of
  appearance.

  Please note that loading a provider explicitly prevents OpenSSL from loading
  the 'default' provider automatically. OpenSSL also allows to define the
  providers that should be loaded directly in its configuration file
  (openssl.cnf for instance) so it is not necessary to use this 'ssl-provider'
  option to load providers. The "show ssl providers" CLI command can be used to
  show all the providers that were successfully loaded.

  The default search path of OpenSSL provider can be found in the output of the
  "openssl version -a" command. If the provider is in another directory, you
  can set the OPENSSL_MODULES environment variable, which takes the directory
  where your provider can be found.

  See also "ssl-propquery" and "ssl-provider-path".

ssl-provider-path <path>
  This setting is only available when support for OpenSSL was built in and when
  OpenSSL's version is at least 3.0. It allows to specify the search path that
  is to be used by OpenSSL for looking for providers. It behaves the same way
  as the OPENSSL_MODULES environment variable. It will be used for any
  following 'ssl-provider' option or until a new 'ssl-provider-path' is
  defined.
  See also "ssl-provider".

ssl-load-extra-del-ext
  This setting allows to configure the way HAProxy does the lookup for the
  extra SSL files. By default HAProxy adds a new extension to the filename.
  (ex: with "foobar.crt" load "foobar.crt.key"). With this option enabled,
  HAProxy removes the extension before adding the new one (ex: with
  "foobar.crt" load "foobar.key").

  Your crt file must have a ".crt" extension for this option to work.

  This option is not compatible with bundle extensions (.ecdsa, .rsa. .dsa)
  and won't try to remove them.

  This option is disabled by default. See also "ssl-load-extra-files".

ssl-load-extra-files <none|all|bundle|sctl|ocsp|issuer|key>*
  This setting alters the way HAProxy will look for unspecified files during
  the loading of the SSL certificates. This option applies to certificates
  associated to "bind" lines as well as "server" lines but some of the extra
  files will not have any functional impact for "server" line certificates.

  By default, HAProxy discovers automatically a lot of files not specified in
  the configuration, and you may want to disable this behavior if you want to
  optimize the startup time.

  "none": Only load the files specified in the configuration. Don't try to load
  a certificate bundle if the file does not exist. In the case of a directory,
  it won't try to bundle the certificates if they have the same basename.

  "all": This is the default behavior, it will try to load everything,
  bundles, sctl, ocsp, issuer, key.

  "bundle": When a file specified in the configuration does not exist, HAProxy
  will try to load a "cert bundle". Certificate bundles are only managed on the
  frontend side and will not work for backend certificates.

  Starting from HAProxy 2.3, the bundles are not loaded in the same OpenSSL
  certificate store, instead it will loads each certificate in a separate
  store which is equivalent to declaring multiple "crt". OpenSSL 1.1.1 is
  required to achieve this. Which means that bundles are now used only for
  backward compatibility and are not mandatory anymore to do an hybrid RSA/ECC
  bind configuration.

  To associate these PEM files into a "cert bundle" that is recognized by
  HAProxy, they must be named in the following way: All PEM files that are to
  be bundled must have the same base name, with a suffix indicating the key
  type. Currently, three suffixes are supported: rsa, dsa and ecdsa. For
  example, if www.example.com has two PEM files, an RSA file and an ECDSA
  file, they must be named: "example.pem.rsa" and "example.pem.ecdsa". The
  first part of the filename is arbitrary; only the suffix matters. To load
  this bundle into HAProxy, specify the base name only:

  Example :  bind :8443 ssl crt example.pem

  Note that the suffix is not given to HAProxy; this tells HAProxy to look for
  a cert bundle.

  HAProxy will load all PEM files in the bundle as if they were configured
  separately in several "crt".

  The bundle loading does not have an impact anymore on the directory loading
  since files are loading separately.

  On the CLI, bundles are seen as separate files, and the bundle extension is
  required to commit them.

  OCSP files (.ocsp), issuer files (.issuer), Certificate Transparency (.sctl)
  as well as private keys (.key) are supported with multi-cert bundling.

  "sctl": Try to load "<basename>.sctl" for each crt keyword. If provided for
  a backend certificate, it will be loaded but will not have any functional
  impact.

  "ocsp": Try to load "<basename>.ocsp" for each crt keyword. If provided for
  a backend certificate, it will be loaded but will not have any functional
  impact.

  "issuer": Try to load "<basename>.issuer" if the issuer of the OCSP file is
  not provided in the PEM file. If provided for a backend certificate, it will
  be loaded but will not have any functional impact.

  "key": If the private key was not provided by the PEM file, try to load a
  file "<basename>.key" containing a private key.

  The default behavior is "all".

  Example:
    ssl-load-extra-files bundle sctl
    ssl-load-extra-files sctl ocsp issuer
    ssl-load-extra-files none

  See also: "crt", section 5.1 about bind options and section 5.2 about server
  options.

ssl-security-level <number>
  This directive allows to chose the OpenSSL security level as described in
  https://www.openssl.org/docs/man1.1.1/man3/SSL_CTX_set_security_level.html
  The security level will be applied to every SSL contextes in HAProxy.
  Only a value between 0 and 5 is supported.

  The default value depends on your OpenSSL version, distribution and how was
  compiled the library.

  This directive requires at least OpenSSL 1.1.1.

ssl-server-verify [none|required]
  The default behavior for SSL verify on servers side. If specified to 'none',
  servers certificates are not verified. The default is 'required' except if
  forced using cmdline option '-dV'.

ssl-skip-self-issued-ca
  Self issued CA, aka x509 root CA, is the anchor for chain validation: as a
  server is useless to send it, client must have it. Standard configuration
  need to not include such CA in PEM file. This option allows you to keep such
  CA in PEM file without sending it to the client. Use case is to provide
  issuer for ocsp without the need for '.issuer' file and be able to share it
  with 'issuers-chain-path'. This concerns all certificates without intermediate
  certificates. It's useless for BoringSSL, .issuer is ignored because ocsp
  bits does not need it. Requires at least OpenSSL 1.0.2.

stats maxconn <connections>
  By default, the stats socket is limited to 10 concurrent connections. It is
  possible to change this value with "stats maxconn".

stats socket [<address:port>|<path>] [param*]
  Binds a UNIX socket to <path> or a TCPv4/v6 address to <address:port>.
  Connections to this socket will return various statistics outputs and even
  allow some commands to be issued to change some runtime settings. Please
  consult section 9.3 "Unix Socket commands" of Management Guide for more
  details.

  All parameters supported by "bind" lines are supported, for instance to
  restrict access to some users or their access rights. Please consult
  section 5.1 for more information.

stats timeout <timeout, in milliseconds>
  The default timeout on the stats socket is set to 10 seconds. It is possible
  to change this value with "stats timeout". The value must be passed in
  milliseconds, or be suffixed by a time unit among { us, ms, s, m, h, d }.

stats-file <path>
  Path to a generated haproxy stats-file. On startup haproxy will preload the
  values to its internal counters. Use the CLI command "dump stats-file" to
  produce such stats-file. See the management manual for more details.

stress-level <level>
  Activate alternative code to stress haproxy binary. Level is an integer from
  0 to 9. The default value 0 disable any stressing execution. Levels from 1 to
  9 will increase the stress pressure on the haproxy binary. Note that using
  any positive level can significantly hurt performance. As such it should
  never be activated unless for debugging purpose and on a developer request.

strict-limits
  Makes process fail at startup when a setrlimit fails. HAProxy tries to set the
  best setrlimit according to what has been calculated. If it fails, it will
  emit a warning. This option is here to guarantee an explicit failure of
  HAProxy when those limits fail. It is enabled by default. It may still be
  forcibly disabled by prefixing it with the "no" keyword.

thread-group <group> [<thread-range>...]
  This setting is only available when support for threads was built in. It
  enumerates the list of threads that will compose thread group <group>.
  Thread numbers and group numbers start at 1. Thread ranges are defined either
  using a single thread number at once, or by specifying the lower and upper
  bounds delimited by a dash '-' (e.g. "1-16"). Unassigned threads will be
  automatically assigned to unassigned thread groups, and thread groups
  defined with this directive will never receive more threads than those
  defined. Defining the same group multiple times overrides previous
  definitions with the new one. See also "nbthread" and "thread-groups".

thread-groups <number>
  This setting is only available when support for threads was built in. It
  makes HAProxy split its threads into <number> independent groups. At the
  moment, the default value is 1. Thread groups make it possible to reduce
  sharing between threads to limit contention, at the expense of some extra
  configuration efforts. It is also the only way to use more than 64 threads
  since up to 64 threads per group may be configured. The maximum number of
  groups is configured at compile time and defaults to 16. See also "nbthread".

thread-hard-limit <number>
  This setting is used to enforce a limit to the number of threads, either
  detected, or configured. This is particularly useful on operating systems
  where the number of threads is automatically detected, where a number of
  threads lower than the number of CPUs is desired in generic and portable
  configurations. Indeed, while "nbthread" enforces a number of threads that
  will result in a warning and bad performance if higher than CPUs available,
  thread-hard-limit will only cap the maximum value and automatically limit
  the number of threads to no higher than this value, but will not raise lower
  values. If "nbthread" is forced to a higher value, thread-hard-limit wins,
  and a warning is emitted in so that the configuration anomaly can be
  fixed. By default there is no limit. See also "nbthread".

uid <number>
  Changes the process's user ID to <number>. It is recommended that the user ID
  is dedicated to HAProxy or to a small set of similar daemons. HAProxy must
  be started with superuser privileges in order to be able to switch to another
  one. See also "gid" and "user".

ulimit-n <number>
  Sets the maximum number of per-process file-descriptors to <number>. By
  default, it is automatically computed, so it is recommended not to use this
  option. If the intent is only to limit the number of file descriptors, better
  use "fd-hard-limit" instead.

  Note that the dynamic servers are not taken into account in this automatic
  resource calculation. If using a large number of them, it may be needed to
  manually specify this value.

  See also: fd-hard-limit, maxconn

unix-bind [ prefix <prefix> ] [ mode <mode> ] [ user <user> ] [ uid <uid> ]
          [ group <group> ] [ gid <gid> ]

  Fixes common settings to UNIX listening sockets declared in "bind" statements.
  This is mainly used to simplify declaration of those UNIX sockets and reduce
  the risk of errors, since those settings are most commonly required but are
  also process-specific. The <prefix> setting can be used to force all socket
  path to be relative to that directory. This might be needed to access another
  component's chroot. Note that those paths are resolved before HAProxy chroots
  itself, so they are absolute. The <mode>, <user>, <uid>, <group> and <gid>
  all have the same meaning as their homonyms used by the "bind" statement. If
  both are specified, the "bind" statement has priority, meaning that the
  "unix-bind" settings may be seen as process-wide default settings.

unsetenv [<name> ...]
  Removes environment variables specified in arguments. This can be useful to
  hide some sensitive information that are occasionally inherited from the
  user's environment during some operations. Variables which did not exist are
  silently ignored so that after the operation, it is certain that none of
  these variables remain. The changes immediately take effect so that the next
  line in the configuration file will not see these variables. See also
  "setenv", "presetenv", and "resetenv".

user <user name>
  Similar to "uid" but uses the UID of user name <user name> from /etc/passwd.
  See also "uid" and "group".

node <name>
  Only letters, digits, hyphen and underscore are allowed, like in DNS names.

  This statement is useful in HA configurations where two or more processes or
  servers share the same IP address. By setting a different node-name on all
  nodes, it becomes easy to immediately spot what server is handling the
  traffic.

wurfl-cache-size <size>
  Sets the WURFL Useragent cache size. For faster lookups, already processed user
  agents are kept in a LRU cache :
  - "0"     : no cache is used.
  - <size>  : size of lru cache in elements.

  Please note that this option is only available when HAProxy has been compiled
  with USE_WURFL=1.

wurfl-data-file <file path>
  The path of the WURFL data file to provide device detection services. The
  file should be accessible by HAProxy with relevant permissions.

  Please note that this option is only available when HAProxy has been compiled
  with USE_WURFL=1.

wurfl-information-list [<capability>]*
  A space-delimited list of WURFL capabilities, virtual capabilities, property
  names we plan to use in injected headers. A full list of capability and
  virtual capability names is available on the Scientiamobile website :

      https://www.scientiamobile.com/wurflCapability

  Valid WURFL properties are:
  - wurfl_id                    Contains the device ID of the matched device.

  - wurfl_root_id               Contains the device root ID of the matched
                                device.

  - wurfl_isdevroot             Tells if the matched device is a root device.
                                Possible values are "TRUE" or "FALSE".

  - wurfl_useragent             The original useragent coming with this
                                particular web request.

  - wurfl_api_version           Contains a string representing the currently
                                used Libwurfl API version.

  - wurfl_info                  A string containing information on the parsed
                                wurfl.xml and its full path.

  - wurfl_last_load_time        Contains the UNIX timestamp of the last time
                                WURFL has been loaded successfully.

  - wurfl_normalized_useragent  The normalized useragent.

  Please note that this option is only available when HAProxy has been compiled
  with USE_WURFL=1.

wurfl-information-list-separator <char>
  A char that will be used to separate values in a response header containing
  WURFL results. If not set that a comma (',') will be used by default.

  Please note that this option is only available when HAProxy has been compiled
  with USE_WURFL=1.

wurfl-patch-file [<file path>]
  A list of WURFL patch file paths. Note that patches are loaded during startup
  thus before the chroot.

  Please note that this option is only available when HAProxy has been compiled
  with USE_WURFL=1.

3.2. Performance tuning
-----------------------

busy-polling
  In some situations, especially when dealing with low latency on processors
  supporting a variable frequency or when running inside virtual machines, each
  time the process waits for an I/O using the poller, the processor goes back
  to sleep or is offered to another VM for a long time, and it causes
  excessively high latencies. This option provides a solution preventing the
  processor from sleeping by always using a null timeout on the pollers. This
  results in a significant latency reduction (30 to 100 microseconds observed)
  at the expense of a risk to overheat the processor. It may even be used with
  threads, in which case improperly bound threads may heavily conflict,
  resulting in a worse performance and high values for the CPU stolen fields
  in "show info" output, indicating which threads are misconfigured. It is
  important not to let the process run on the same processor as the network
  interrupts when this option is used. It is also better to avoid using it on
  multiple CPU threads sharing the same core. This option is disabled by
  default. If it has been enabled, it may still be forcibly disabled by
  prefixing it with the "no" keyword. It is ignored by the "select" and
  "poll" pollers.

  This option is automatically disabled on old processes in the context of
  seamless reload; it avoids too much cpu conflicts when multiple processes
  stay around for some time waiting for the end of their current connections.

max-spread-checks <delay in milliseconds>
  By default, HAProxy tries to spread the start of health checks across the
  smallest health check interval of all the servers in a farm. The principle is
  to avoid hammering services running on the same server. But when using large
  check intervals (10 seconds or more), the last servers in the farm take some
  time before starting to be tested, which can be a problem. This parameter is
  used to enforce an upper bound on delay between the first and the last check,
  even if the servers' check intervals are larger. When servers run with
  shorter intervals, their intervals will be respected though.

maxcompcpuusage <number>
  Sets the maximum CPU usage HAProxy can reach before stopping the compression
  for new requests or decreasing the compression level of current requests.
  It works like 'maxcomprate' but measures CPU usage instead of incoming data
  bandwidth. The value is expressed in percent of the CPU used by HAProxy. A
  value of 100 disable the limit. The default value is 100. Setting a lower
  value will prevent the compression work from slowing the whole process down
  and from introducing high latencies.

maxcomprate <number>
  Sets the maximum per-process input compression rate to <number> kilobytes
  per second. For each stream, if the maximum is reached, the compression
  level will be decreased during the stream. If the maximum is reached at the
  beginning of a stream, the stream will not compress at all. If the maximum
  is not reached, the compression level will be increased up to
  tune.comp.maxlevel. A value of zero means there is no limit, this is the
  default value.

maxconn <number>
  Sets the maximum per-process number of concurrent connections to <number>. It
  is equivalent to the command-line argument "-n". The value provided in
  command-line argument via "-n" takes the precedence over the maxconn value set
  in the global section. Haproxy process could be also compiled with
  SYSTEM_MAXCONN compile-time variable, which is served in this case as the
  system maxconn maximum. Again, the command-line "-n" argument allows at
  runtime to bypass SYSTEM_MAXCONN limit, if set. Proxies will stop accepting
  connections when maxconn is reached. The process soft file descriptor limit
  (could be obtained with "ulimit -n" command) is automatically adjusted
  according to provided maxconn. See also "ulimit-n". Note: the "select" poller
  cannot reliably use more than 1024 file descriptors on some platforms. If your
  platform only supports select and reports "select FAILED" on startup, you need
  to reduce the maxconn until it works (slightly below 500 in general). If
  maxconn value is not set, it will be automatically calculated based on the
  current file descriptors limits, reported by the "ulimit -nH" command (we take
  the maximum between the hard and soft values), then automatic value will be
  possibly reduced by "fd-hard-limit" and by memory limit, if the latter was
  enforced via "-m" command line option. Automatic value is also dependent from
  the buffer size, memory allocated to compression, SSL cache size, and the use
  or not of SSL and the associated maxsslconn (which can also be automatic).

  See also: fd-hard-limit, ulimit-n

maxconnrate <number>
  Sets the maximum per-process number of connections per second to <number>.
  Proxies will stop accepting connections when this limit is reached. It can be
  used to limit the global capacity regardless of each frontend capacity. It is
  important to note that this can only be used as a service protection measure,
  as there will not necessarily be a fair share between frontends when the
  limit is reached, so it's a good idea to also limit each frontend to some
  value close to its expected share. Also, lowering tune.maxaccept can improve
  fairness.

maxpipes <number>
  Sets the maximum per-process number of pipes to <number>. Currently, pipes
  are only used by kernel-based tcp splicing. Since a pipe contains two file
  descriptors, the "ulimit-n" value will be increased accordingly. The default
  value is maxconn/4, which seems to be more than enough for most heavy usages.
  The splice code dynamically allocates and releases pipes, and can fall back
  to standard copy, so setting this value too low may only impact performance.

maxsessrate <number>
  Sets the maximum per-process number of sessions per second to <number>.
  Proxies will stop accepting connections when this limit is reached. It can be
  used to limit the global capacity regardless of each frontend capacity. It is
  important to note that this can only be used as a service protection measure,
  as there will not necessarily be a fair share between frontends when the
  limit is reached, so it's a good idea to also limit each frontend to some
  value close to its expected share. Also, lowering tune.maxaccept can improve
  fairness.

maxsslconn <number>
  Sets the maximum per-process number of concurrent SSL connections to
  <number>. By default there is no SSL-specific limit, which means that the
  global maxconn setting will apply to all connections. Setting this limit
  avoids having openssl use too much memory and crash when malloc returns NULL
  (since it unfortunately does not reliably check for such conditions). Note
  that the limit applies both to incoming and outgoing connections, so one
  connection which is deciphered then ciphered accounts for 2 SSL connections.
  If this value is not set, but a memory limit is enforced, this value will be
  automatically computed based on the memory limit, maxconn,  the buffer size,
  memory allocated to compression, SSL cache size, and use of SSL in either
  frontends, backends or both. If neither maxconn nor maxsslconn are specified
  when there is a memory limit, HAProxy will automatically adjust these values
  so that 100% of the connections can be made over SSL with no risk, and will
  consider the sides where it is enabled (frontend, backend, both).

maxsslrate <number>
  Sets the maximum per-process number of SSL sessions per second to <number>.
  SSL listeners will stop accepting connections when this limit is reached. It
  can be used to limit the global SSL CPU usage regardless of each frontend
  capacity. It is important to note that this can only be used as a service
  protection measure, as there will not necessarily be a fair share between
  frontends when the limit is reached, so it's a good idea to also limit each
  frontend to some value close to its expected share. It is also important to
  note that the sessions are accounted before they enter the SSL stack and not
  after, which also protects the stack against bad handshakes. Also, lowering
  tune.maxaccept can improve fairness.

maxzlibmem <number>
  Sets the maximum amount of RAM in megabytes per process usable by the zlib.
  When the maximum amount is reached, future streams will not compress as long
  as RAM is unavailable. When sets to 0, there is no limit.
  The default value is 0. The value is available in bytes on the UNIX socket
  with "show info" on the line "MaxZlibMemUsage", the memory used by zlib is
  "ZlibMemUsage" in bytes.

no-memory-trimming
  Disables memory trimming ("malloc_trim") at a few moments where attempts are
  made to reclaim lots of memory (on memory shortage or on reload). Trimming
  memory forces the system's allocator to scan all unused areas and to release
  them. This is generally seen as nice action to leave more available memory to
  a new process while the old one is unlikely to make significant use of it.
  But some systems dealing with tens to hundreds of thousands of concurrent
  connections may experience a lot of memory fragmentation, that may render
  this release operation extremely long. During this time, no more traffic
  passes through the process, new connections are not accepted anymore, some
  health checks may even fail, and the watchdog may even trigger and kill the
  unresponsive process, leaving a huge core dump. If this ever happens, then it
  is suggested to use this option to disable trimming and stop trying to be
  nice with the new process. Note that advanced memory allocators usually do
  not suffer from such a problem.

noepoll
  Disables the use of the "epoll" event polling system on Linux. It is
  equivalent to the command-line argument "-de". The next polling system
  used will generally be "poll". See also "nopoll".

noevports
  Disables the use of the event ports event polling system on SunOS systems
  derived from Solaris 10 and later. It is equivalent to the command-line
  argument "-dv". The next polling system used will generally be "poll". See
  also "nopoll".

nogetaddrinfo
  Disables the use of getaddrinfo(3) for name resolving. It is equivalent to
  the command line argument "-dG". Deprecated gethostbyname(3) will be used.

nokqueue
  Disables the use of the "kqueue" event polling system on BSD. It is
  equivalent to the command-line argument "-dk". The next polling system
  used will generally be "poll". See also "nopoll".

nopoll
  Disables the use of the "poll" event polling system. It is equivalent to the
  command-line argument "-dp". The next polling system used will be "select".
  It should never be needed to disable "poll" since it's available on all
  platforms supported by HAProxy. See also "nokqueue", "noepoll" and
  "noevports".

noreuseport
  Disables the use of SO_REUSEPORT - see socket(7). It is equivalent to the
  command line argument "-dR".

nosplice
  Disables the use of kernel tcp splicing between sockets on Linux. It is
  equivalent to the command line argument "-dS". Data will then be copied
  using conventional and more portable recv/send calls. Kernel tcp splicing is
  limited to some very recent instances of kernel 2.6. Most versions between
  2.6.25 and 2.6.28 are buggy and will forward corrupted data, so they must not
  be used. This option makes it easier to globally disable kernel splicing in
  case of doubt. See also "option splice-auto", "option splice-request" and
  "option splice-response".

profiling.memory { on | off }
  Enables ('on') or disables ('off') per-function memory profiling. This will
  keep usage statistics of malloc/calloc/realloc/free calls anywhere in the
  process (including libraries) which will be reported on the CLI using the
  "show profiling" command. This is essentially meant to be used when an
  abnormal memory usage is observed that cannot be explained by the pools and
  other info are required. The performance hit will typically be around 1%,
  maybe a bit more on highly threaded machines, so it is normally suitable for
  use in production. The same may be achieved at run time on the CLI using the
  "set profiling memory" command, please consult the management manual.

profiling.tasks { auto | on | off }
  Enables ('on') or disables ('off') per-task CPU profiling. When set to 'auto'
  the profiling automatically turns on a thread when it starts to suffer from
  an average latency of 1000 microseconds or higher as reported in the
  "avg_loop_us" activity field, and automatically turns off when the latency
  returns below 990 microseconds (this value is an average over the last 1024
  loops so it does not vary quickly and tends to significantly smooth short
  spikes). It may also spontaneously trigger from time to time on overloaded
  systems, containers, or virtual machines, or when the system swaps (which
  must absolutely never happen on a load balancer).

  CPU profiling per task can be very convenient to report where the time is
  spent and which requests have what effect on which other request. Enabling
  it will typically affect the overall's performance by less than 1%, thus it
  is recommended to leave it to the default 'auto' value so that it only
  operates when a problem is identified. This feature requires a system
  supporting the clock_gettime(2) syscall with clock identifiers
  CLOCK_MONOTONIC and CLOCK_THREAD_CPUTIME_ID, otherwise the reported time will
  be zero. This option may be changed at run time using "set profiling" on the
  CLI.

spread-checks <0..50, in percent>
  Sometimes it is desirable to avoid sending agent and health checks to
  servers at exact intervals, for instance when many logical servers are
  located on the same physical server. With the help of this parameter, it
  becomes possible to add some randomness in the check interval between 0
  and +/- 50%. A value between 2 and 5 seems to show good results. The
  default value remains at 0.

ssl-engine <name> [algo <comma-separated list of algorithms>]
  Sets the OpenSSL engine to <name>. List of valid values for <name> may be
  obtained using the command "openssl engine". This statement may be used
  multiple times, it will simply enable multiple crypto engines. Referencing an
  unsupported engine will prevent HAProxy from starting. Note that many engines
  will lead to lower HTTPS performance than pure software with recent
  processors. The optional command "algo" sets the default algorithms an ENGINE
  will supply using the OPENSSL function ENGINE_set_default_string(). A value
  of "ALL" uses the engine for all cryptographic operations. If no list of
  algo is specified then the value of "ALL" is used. A comma-separated list
  of different algorithms may be specified, including: RSA, DSA, DH, EC, RAND,
  CIPHERS, DIGESTS, PKEY, PKEY_CRYPTO, PKEY_ASN1. This is the same format that
  openssl configuration file uses:
  https://www.openssl.org/docs/man1.0.2/apps/config.html

  HAProxy Version 2.6 disabled the support for engines in the default build.
  This option is only available when HAProxy has been built with support for
  it.  In case the ssl-engine is required HAProxy can be rebuild with the
  USE_ENGINE=1 flag.

ssl-mode-async
  Adds SSL_MODE_ASYNC mode to the SSL context. This enables asynchronous TLS
  I/O operations if asynchronous capable SSL engines are used. The current
  implementation supports a maximum of 32 engines. The Openssl ASYNC API
  doesn't support moving read/write buffers and is not compliant with
  HAProxy's buffer management. So the asynchronous mode is disabled on
  read/write  operations (it is only enabled during initial and renegotiation
  handshakes).

tune.applet.zero-copy-forwarding { on | off }
  Enables ('on') of disabled ('off') the zero-copy forwarding of data for the
  applets. It is enabled by default.

  See also: tune.disable-zero-copy-forwarding.

tune.buffers.limit <number>
  Sets a hard limit on the number of buffers which may be allocated per process.
  The default value is zero which means unlimited. The limit will automatically
  be re-adjusted to satisfy the reserved buffers for emergency situations so
  that the user doesn't have to perform complicated calculations. Forcing this
  value can be particularly useful to limit the amount of memory a process may
  take, while retaining a sane behavior. When this limit is reached, a task
  that requests a buffer waits for another one to be released first. Most of
  the time the waiting time is very short and not perceptible provided that
  limits remain reasonable. However, some historical limitations have weakened
  this mechanism over versions and it is known that in certain situations of
  sustained shortage, some tasks may freeze until their timeout expires, so it
  is safer to avoid using this when not strictly necessary.

tune.buffers.reserve <number>
  Sets the number of per-thread buffers which are pre-allocated and reserved
  for use only during memory shortage conditions resulting in failed memory
  allocations. The minimum value is 0 and the default is 4. There is no reason
  a user would want to change this value, unless a core developer suggests to
  change it for a very specific reason.

tune.bufsize <size>
  Sets the buffer size to this size (in bytes). Lower values allow more
  streams to coexist in the same amount of RAM, and higher values allow some
  applications with very large cookies to work. The default value is 16384 and
  can be changed at build time. It is strongly recommended not to change this
  from the default value, as very low values will break some services such as
  statistics, and values larger than default size will increase memory usage,
  possibly causing the system to run out of memory. At least the global maxconn
  parameter should be decreased by the same factor as this one is increased. In
  addition, use of HTTP/2 mandates that this value must be 16384 or more. If an
  HTTP request is larger than (tune.bufsize - tune.maxrewrite), HAProxy will
  return HTTP 400 (Bad Request) error. Similarly if an HTTP response is larger
  than this size, HAProxy will return HTTP 502 (Bad Gateway). Note that the
  value set using this parameter will automatically be rounded up to the next
  multiple of 8 on 32-bit machines and 16 on 64-bit machines.

tune.bufsize.small <size>
  Sets the size in bytes for small buffers. The defaults value is 1024.

  These buffers are designed to be used in some specific contexts where memory
  consumption is restrained but it seems unnecessary to allocate a full buffer.
  If however a small buffer is not sufficient, a reallocation is automatically
  done to switch to a standard size buffer.

  For the moment, it is used only by HTTP/3 protocol to emit the response
  headers.

tune.comp.maxlevel <number>
  Sets the maximum compression level. The compression level affects CPU
  usage during compression. This value affects CPU usage during compression.
  Each stream using compression initializes the compression algorithm with
  this value. The default value is 1.

tune.disable-fast-forward [ EXPERIMENTAL ]
  Disables the data fast-forwarding. It is a mechanism to optimize the data
  forwarding by passing data directly from a side to the other one without
  waking the stream up. Thanks to this directive, it is possible to disable
  this optimization. Note it also disable any kernel tcp splicing but also the
  zero-copy forwarding. This command is not meant for regular use, it will
  generally only be suggested by developers along complex debugging
  sessions. For this reason it is internally marked as experimental, meaning
  that "expose-experimental-directives" must appear on a line before this
  directive.

tune.disable-zero-copy-forwarding
  Globally disables the zero-copy forwarding of data. It is a mechanism to
  optimize the data fast-forwarding by avoiding to use the channel's buffer.
  Thanks to this directive, it is possible to disable this optimization. Note
  it also disable any kernel tcp splicing.

  See also: tune.pt.zero-copy-forwarding, tune.applet.zero-copy-forwarding,
            tune.h1.zero-copy-fwd-recv, tune.h1.zero-copy-fwd-send,
            tune.h2.zero-copy-fwd-send, tune.quic.zero-copy-fwd-send

tune.epoll.mask-events <event[,...]>
  Along HAProxy's history, a few complex issues were met that were caused by
  bugs in the epoll mechanism in the Linux kernel. These ones usually are very
  rare and unreproducible outside the reporter's environment, and may only be
  worked around by disabling epoll and switching to poll instead, which is not
  very satisfying for high performance environments. Each time, issues affect
  only very specific (and rare) event types, and offering the ability to mask
  them can constitute a more acceptable work-around. This options offers this
  possibility by permitting to silently ignore events a few uncommon events
  and replace them with an input (which reports an unspecified incoming event).
  The effect is to avoid the fast error processing paths in certain places and
  only use the common paths. This should never be used unless being invited to
  do so by an expert in order to diagnose or work around a kernel bug.

  The option takes a single argument which is a comma-delimited list of words
  each designating an event to be masked. The currently supported list of
  events is:
    - "err":   mask the EPOLLERR event
    - "hup":   mask the EPOLLHUP events
    - "rdhup": mask the EPOLLRDHUP events

  Example:
     # mask all non-traffic epoll events:
     tune.epoll.mask-events err,hup,rdhup

tune.events.max-events-at-once <number>
  Sets the number of events that may be processed at once by an asynchronous
  task handler (from event_hdl API). <number> should be included between 1
  and 10000. Large number could cause thread contention as a result of the
  task doing heavy work without interruption, and on the other hand, small
  number could result in the task being constantly rescheduled because it
  cannot consume enough events per run and is not able to catch up with the
  event producer. The default value may be forced at build time, otherwise
  defaults to 100.

tune.fail-alloc
  If compiled with DEBUG_FAIL_ALLOC or started with "-dMfail", gives the
  percentage of chances an allocation attempt fails. Must be between 0 (no
  failure) and 100 (no success). This is useful to debug and make sure memory
  failures are handled gracefully. When not set, the ratio is 0. However the
  command-line "-dMfail" option automatically sets it to 1% failure rate so that
  it is not necessary to change the configuration for testing.

tune.fd.edge-triggered { on | off }  [ EXPERIMENTAL ]
  Enables ('on') or disables ('off') the edge-triggered polling mode for FDs
  that support it. This is currently only support with epoll. It may noticeably
  reduce the number of epoll_ctl() calls and slightly improve performance in
  certain scenarios. This is still experimental, it may result in frozen
  connections if bugs are still present, and is disabled by default.

tune.glitches.kill.cpu-usage <number>
  Sets the minimum CPU usage between 0 and 100, at which connections showing
  too many glitches will be killed. This applies to connections that have
  reached their glitches-threshold limit. In environments where very long
  connections often behave badly without causing any performance impact, it
  might be desirable to keep them regardless of their misbehavior as long as
  they do not hurt, and to only start to kill such connections when the CPU is
  getting busy. This parameters allows to specify that a connection reaching
  its glitches threshold will be actively killed when the CPU usage is at this
  level or above, but never when it's below. Note that the CPU usage is
  measured per thread, so a single misbehaving connection might be killed. The
  default is zero, meaning that a connection reaching its glitches-threshold
  will automatically get killed. A rule of thumb would be to set this value to
  twice the usually observed CPU usage, or the commonly observed CPU usage plus
  half the idle one (i.e. if CPU commonly reaches 60%, setting 80 here can make
  sense). This parameter has no effect without tune.h2.fe.glitches-threshold or
  tune.quic.frontend.glitches-threshold. See also the global parameters
  "tune.h2.fe.glitches-threshold" and "tune.quic.frontend.glitches-threshold".

tune.h1.zero-copy-fwd-recv { on | off }
  Enables ('on') of disabled ('off') the zero-copy receives of data for the H1
  multiplexer. It is enabled by default.

  See also: tune.disable-zero-copy-forwarding, tune.h1.zero-copy-fwd-send

tune.h1.zero-copy-fwd-send { on | off }
  Enables ('on') of disabled ('off') the zero-copy sends of data for the H1
  multiplexer. It is enabled by default.

  See also: tune.disable-zero-copy-forwarding, tune.h1.zero-copy-fwd-recv

tune.h2.be.glitches-threshold <number>
  Sets the threshold for the number of glitches on a backend connection, where
  that connection will automatically be killed. This allows to automatically
  kill misbehaving connections without having to write explicit rules for them.
  The default value is zero, indicating that no threshold is set so that no
  event will cause a connection to be closed. Beware that some H2 servers may
  occasionally cause a few glitches over long lasting connection, so any non-
  zero value here should probably be in the hundreds or thousands to be
  effective without affecting slightly bogus servers. It is also possible to
  only kill connections when the CPU usage crosses a certain level, by using
  "tune.glitches.kill.cpu-usage".

  See also: tune.h2.fe.glitches-threshold, bc_glitches, and
            tune.glitches.kill.cpu-usage

tune.h2.be.initial-window-size <number>
  Sets the HTTP/2 initial window size for outgoing connections, which is the
  number of bytes the server can respond before waiting for an acknowledgment
  from HAProxy. This setting only affects payload contents, not headers. When
  not set, the common default value set by tune.h2.initial-window-size applies.
  It can make sense to slightly increase this value to allow faster downloads
  or to reduce CPU usage on the servers, at the expense of creating unfairness
  between clients. It is better to use tune.h2.be.rxbuf instead, which does not
  cause any unfairness. It doesn't affect resource usage.

  See also: tune.h2.initial-window-size.

tune.h2.be.max-concurrent-streams <number>
  Sets the HTTP/2 maximum number of concurrent streams per outgoing connection
  (i.e. the number of outstanding requests on a single connection to a server).
  When not set, the default set by tune.h2.max-concurrent-streams applies. A
  smaller value than the default 100 may improve a site's responsiveness at the
  expense of maintaining more established connections to the servers. When the
  "http-reuse" setting is set to "always", it is recommended to reduce this
  value so as not to mix too many different clients over the same connection,
  because if a client is slower than others, a mechanism known as "head of
  line blocking" tends to cause cascade effect on download speed for all
  clients sharing a connection (keep tune.h2.be.initial-window-size low in this
  case). It is highly recommended not to increase this value; some might find
  it optimal to run at low values (1..5 typically).

tune.h2.be.rxbuf <size>
  Sets the HTTP/2 receive buffer size for outgoing connections, in bytes. This
  size will be rounded up to the next multiple of tune.bufsize and will be
  shared between all streams uploading data (both HEADERS and DATA frames). In
  any case, one buffer will always be granted to each stream, and 7/8 of the
  unused buffers will be shared between streams downloading payload, allowing
  to significantly improve upload performance and avoid head-of-line blocking
  (HoL) on backend connections shared between multiple clients when http-reuse
  is set to "always". The advertised per-stream window is automatically
  adjusted to reflect the available space so that in practice it should not be
  required to touch tune.h2.be.initial-window-size. If less than the size
  required to deal with all streams is set, this minimum will be used. The
  default value is about 1600k (100 streams with 16kB buffers each).

  See also: tune.h2.be.initial-window-size, tune.h2.fe.rxbuf, http-reuse.

tune.h2.fe.glitches-threshold <number>
  Sets the threshold for the number of glitches on a frontend connection, where
  that connection will automatically be killed. This allows to automatically
  kill misbehaving connections without having to write explicit rules for them.
  The default value is zero, indicating that no threshold is set so that no
  event will cause a connection to be closed. Beware that some H2 clientss may
  occasionally cause a few glitches over long lasting connection, so any non-
  zero value here should probably be in the hundreds or thousands to be
  effective without affecting slightly bogus clients. It is also possible to
  only kill connections when the CPU usage crosses a certain level, by using
  "tune.glitches.kill.cpu-usage".

  See also: tune.h2.be.glitches-threshold, fc_glitches, and
            tune.glitches.kill.cpu-usage

tune.h2.fe.initial-window-size <number>
  Sets the HTTP/2 initial window size for incoming connections, which is the
  number of bytes the client can upload before waiting for an acknowledgment
  from HAProxy. This setting only affects payload contents (i.e. the body of
  POST requests), not headers. When not set, the common default value set by
  tune.h2.initial-window-size applies. It can make sense to increase this value
  to allow faster uploads. The default value equals tune.bufsize (16384) and
  allows at least 1.25 Mbps of bandwidth per stream over a 100 ms ping time,
  and 125 Mbps for 1 ms ping time. It doesn't affect resource usage. Using too
  large values may cause clients to experience a lack of responsiveness if
  pages are accessed in parallel to large uploads. It is better to use
  tune.h2.fe.rxbuf instead, which does not cause any unfairness.

  See also: tune.h2.initial-window-size.

tune.h2.fe.max-concurrent-streams <number>
  Sets the HTTP/2 maximum number of concurrent streams per incoming connection
  (i.e. the number of outstanding requests on a single connection from a
  client). When not set, the default set by tune.h2.max-concurrent-streams
  applies. A larger value than the default 100 may sometimes slightly improve
  the page load time for complex sites with lots of small objects over high
  latency networks but can also result in using more memory by allowing a
  client to allocate more resources at once. The default value of 100 is
  generally good and it is recommended not to change this value.

tune.h2.fe.max-total-streams <number>
  Sets the HTTP/2 maximum number of total streams processed per incoming
  connection. Once this limit is reached, HAProxy will send a graceful GOAWAY
  frame informing the client that it will close the connection after all
  pending streams have been closed. In practice, clients tend to close as fast
  as possible when receiving this, and to establish a new connection for next
  requests. Doing this is sometimes useful and desired in situations where
  clients stay connected for a very long time and cause some imbalance inside a
  farm. For example, in some highly dynamic environments, it is possible that
  new load balancers are instantiated on the fly to adapt to a load increase,
  and that once the load goes down they should be stopped without breaking
  established connections. By setting a limit here, the connections will have
  a limited lifetime and will be frequently renewed, with some possibly being
  established to other nodes, so that existing resources are quickly released.

  It's important to understand that there is an implicit relation between this
  limit and "tune.h2.fe.max-concurrent-streams" above. Indeed, HAProxy will
  always accept to process any possibly pending streams that might be in flight
  between the client and the frontend, so the advertised limit will always
  automatically be raised by the value configured in max-concurrent-streams,
  and this value will serve as a hard limit above which a violation by a non-
  compliant client will result in the connection being closed. Thus when
  counting the number of requests per connection from the logs, any number
  between max-total-streams and (max-total-streams + max-concurrent-streams)
  may be observed depending on how fast streams are created by the client.

  The default value is zero, which enforces no limit beyond those implied by
  the protocol (2^30 ~= 1.07 billion). Values around 1000 may already cause
  frequent connection renewal without causing any perceptible latency to most
  clients. Setting it too low may result in an increase of CPU usage due to
  frequent TLS reconnections, in addition to increased page load time. Please
  note that some load testing tools do not support reconnections and may report
  errors with this setting; as such it may be needed to disable it when running
  performance benchmarks. See also "tune.h2.fe.max-concurrent-streams".

tune.h2.fe.rxbuf <size>
  Sets the HTTP/2 receive buffer size for incoming connections, in bytes. This
  size will be rounded up to the next multiple of tune.bufsize and will be
  shared between all streams uploading data (both HEADERS and DATA frames). In
  any case, one buffer will always be granted to each stream, and 7/8 of the
  unused buffers will be shared between streams uploading payload, allowing to
  significantly improve upload performance. The advertised per-stream window is
  automatically adjusted to reflect the available space so that in practice it
  should not be required to touch tune.h2.fe.initial-window-size. If less than
  the size required to deal with all streams is set, this minimum will be used.
  The default value of 1600k (100 streams with 16kB buffers each) permits
  roughly 130 Mbps of upload speed for a client with a 100ms RTT.

  See also: tune.h2.fe.initial-window-size and tune.h2.be.rxbuf.

tune.h2.header-table-size <number>
  Sets the HTTP/2 dynamic header table size. It defaults to 4096 bytes and
  cannot be larger than 65536 bytes. A larger value may help certain clients
  send more compact requests, depending on their capabilities. This amount of
  memory is consumed for each HTTP/2 connection. It is recommended not to
  change it.

tune.h2.initial-window-size <number>
  Sets the default value for the HTTP/2 initial window size, on both incoming
  and outgoing connections. This value is used for incoming connections when
  tune.h2.fe.initial-window-size is not set, and by outgoing connections when
  tune.h2.be.initial-window-size is not set. This setting is used both as the
  initial value and as a minimum per stream. The default value equals 16384
  (tune.bufsize), which for uploads roughly allows at least 1.25 Mbps of
  bandwidth per stream over a network showing a 100 ms ping time, or 125 Mbps
  over a 1-ms local network. When less receive buffers than the maximum are in
  use, within the limits defined by tune.h2.be.rxbuf and tune.h2.fe.rxbuf,
  unused buffers will be shared between receiving streams. As such there is
  normally no point in changing this default setting. Given that changing this
  default value will both increase upload speeds and cause more unfairness
  between clients on downloads, it is recommended to instead use the side-
  specific settings tune.h2.fe.initial-window-size and
  tune.h2.be.initial-window-size.

tune.h2.max-concurrent-streams <number>
  Sets the default HTTP/2 maximum number of concurrent streams per connection
  (i.e. the number of outstanding requests on a single connection). This value
  is used for incoming connections when tune.h2.fe.max-concurrent-streams is
  not set, and for outgoing connections when tune.h2.be.max-concurrent-streams
  is not set. The default value is 100. The impact varies depending on the side
  so please see the two settings above for more details. It is recommended not
  to use this setting and to switch to the per-side ones instead. A value of
  zero disables the limit so a single client may create as many streams as
  allocatable by HAProxy. It is highly recommended not to change this value.

tune.h2.max-frame-size <number>
  Sets the HTTP/2 maximum frame size that HAProxy announces it is willing to
  receive to its peers. The default value is the largest between 16384 and the
  buffer size (tune.bufsize). In any case, HAProxy will not announce support
  for frame sizes larger than buffers. The main purpose of this setting is to
  allow to limit the maximum frame size setting when using large buffers. Too
  large frame sizes might have performance impact or cause some peers to
  misbehave. It is highly recommended not to change this value.

tune.h2.zero-copy-fwd-send { on | off }
  Enables ('on') of disabled ('off') the zero-copy sends of data for the H2
  multiplexer. It is enabled by default.

  See also: tune.disable-zero-copy-forwarding

tune.http.cookielen <number>
  Sets the maximum length of captured cookies. This is the maximum value that
  the "capture cookie xxx len yyy" will be allowed to take, and any upper value
  will automatically be truncated to this one. It is important not to set too
  high a value because all cookie captures still allocate this size whatever
  their configured value (they share a same pool). This value is per request
  per response, so the memory allocated is twice this value per connection.
  When not specified, the limit is set to 63 characters. It is recommended not
  to change this value.

tune.http.logurilen <number>
  Sets the maximum length of request URI in logs. This prevents truncating long
  request URIs with valuable query strings in log lines. This is not related
  to syslog limits. If you increase this limit, you may also increase the
  'log ... len yyy' parameter. Your syslog daemon may also need specific
  configuration directives too.
  The default value is 1024.

tune.http.maxhdr <number>
  Sets the maximum number of headers allowed in received HTTP messages. When a
  message comes with a number of headers greater than this value (including the
  first line), it is rejected with a "400 Bad Request" status code for a
  request, or "502 Bad Gateway" for a response. The default value is 101, which
  is enough for all usages, considering that the widely deployed Apache server
  uses the same limit. It can be useful to push this limit further to
  temporarily allow a buggy application to work by the time it gets fixed. The
  accepted range is 1..32767. Keep in mind that each new header consumes 32bits
  of memory for each stream, so don't push this limit too high.

  Note that HTTP/1.1 is a text protocol, so there is no special limit when the
  message is sent. The limit during the message parsing is sufficient. HTTP/2
  and HTTP/3 are binary protocols and require an encoding step. A limit is set
  too when headers are encoded to comply to limitation imposed by the
  protocols. This limit is large enough but not documented on purpose. The same
  limit is applied on the first steps of the decoding for the same reason.

tune.idle-pool.shared { on | off }
  Enables ('on') or disables ('off') sharing of idle connection pools between
  threads for a same server. The default is to share them between threads in
  order to minimize the number of persistent connections to a server, and to
  optimize the connection reuse rate. But to help with debugging or when
  suspecting a bug in HAProxy around connection reuse, it can be convenient to
  forcefully disable this idle pool sharing between multiple threads, and force
  this option to "off". The default is on. It is strongly recommended against
  disabling this option without setting a conservative value on "pool-low-conn"
  for all servers relying on connection reuse to achieve a high performance
  level, otherwise connections might be closed very often as the thread count
  increases.

tune.idletimer <timeout>
  Sets the duration after which HAProxy will consider that an empty buffer is
  probably associated with an idle stream. This is used to optimally adjust
  some packet sizes while forwarding large and small data alternatively. The
  decision to use splice() or to send large buffers in SSL is modulated by this
  parameter. The value is in milliseconds between 0 and 65535. A value of zero
  means that HAProxy will not try to detect idle streams. The default is 1000,
  which seems to correctly detect end user pauses (e.g. read a page before
  clicking). There should be no reason for changing this value. Please check
  tune.ssl.maxrecord below.

tune.listener.default-shards { by-process | by-thread | by-group }
  Normally, all "bind" lines will create a single shard, that is, a single
  socket that all threads of the process will listen to. With many threads,
  this is not very efficient, and may even induce some important overhead in
  the kernel for updating the polling state or even distributing events to the
  various threads. Modern operating systems support balancing of incoming
  connections, a mechanism that will consist in permitting multiple sockets to
  be bound to the same address and port, and to evenly distribute all incoming
  connections to these sockets so that each thread only sees the connections
  that are waiting in the socket it is bound to. This significantly reduces
  kernel-side overhead and increases performance in the incoming connection
  path. This is usually enabled in HAProxy using the "shards" setting on "bind"
  lines, which defaults to 1, meaning that each listener will be unique in the
  process. On systems with many processors, it may be more convenient to change
  the default setting to "by-thread" in order to always create one listening
  socket per thread, or "by-group" in order to always create one listening
  socket per thread group. Be careful about the file descriptor usage with
  "by-thread" as each listener will need as many sockets as there are threads.
  Also some operating systems (e.g. FreeBSD) are limited to no more than 256
  sockets on a same address. Note that "by-group" will remain equivalent to
  "by-process" for default configurations involving a single thread group, and
  will fall back to sharing the same socket on systems that do not support this
  mechanism. The default is "by-group" with a fallback to "by-process" for
  systems or socket families that do not support multiple bindings.

tune.listener.multi-queue { on | fair | off }
  Enables ('on' / 'fair') or disables ('off') the listener's multi-queue accept
  which spreads the incoming traffic to all threads a "bind" line is allowed to
  run on instead of taking them for itself. This provides a smoother traffic
  distribution and scales much better, especially in environments where threads
  may be unevenly loaded due to external activity (network interrupts colliding
  with one thread for example). The default mode, "on", optimizes the choice of
  a thread by picking in a sample the one with the less connections. It is
  often the best choice when connections are long-lived as it manages to keep
  all threads busy. A second mode, "fair", instead cycles through all threads
  regardless of their instant load level. It can be better suited for short-
  lived connections, or on machines with very large numbers of threads where
  the probability to find the least loaded thread with the first mode is low.
  Finally it is possible to forcefully disable the redistribution mechanism
  using "off" for troubleshooting, or for situations where connections are
  short-lived and it is estimated that the operating system already provides a
  good enough distribution. The default is "on".

tune.lua.bool-sample-conversion { normal | pre-3.1-bug }
  Explicitly tell haproxy how haproxy sample objects should be handled when
  pushed to Lua. Indeed, when leveraging native converters, sample fetches or
  variables from Lua script (to name a few), haproxy converts the internal
  smp type to equivalent Lua type. Because of historical implementation, there
  is an ambiguity around boolean handling: when doing Lua -> haproxy smp
  conversion, booleans are properly preserved, but when doing haproxy
  smp -> Lua conversion, booleans were converted to integers by mistake. This
  means that a sample fetch or converter returning a boolean would return an
  integer 0 or 1 when leveraged from Lua. Unfortunately, in Lua, booleans and
  integers are not interchangeable. Thus, to avoid ambiguities,
  "tune.lua.bool-sample-conversion" must explicitly be set to either "normal"
  (which means dropping the historical behavior for better consistency) or
  "pre-3.1-bug" (enforce historical behavior to prevent existing script logic
  from misbehaving). If the option is not set explicitly and a Lua script is
  loaded from the configuration, haproxy will emit a warning, and the option
  will implicitly default to "pre-3.1-bug" to match with the historical
  behavior. It is recommended to set this option to "normal" after ensuring
  that in-use Lua scripts are properly handling bool haproxy samples as booleans.

  This setting must be set before any "lua-load" or "lua-load-per-thread"
  directive for it to be considered, else it is ignored.

tune.lua.burst-timeout <timeout>
  The "burst" execution timeout applies to any Lua handler. If the handler
  fails to finish or yield before timeout is reached, it will be aborted to
  prevent thread contention, to prevent traffic from not being served for too
  long, and ultimately to prevent the process from crashing because of the
  watchdog kicking in. Unlike other lua timeouts which are yield-cumulative,
  burst-timeout will ensure that the time spent in a single lua execution
  window does not exceed the configured timeout.

  Yielding here means that the lua execution is effectively interrupted
  either through an explicit call to lua-yielding function such as
  core.(m)sleep() or core.yield(), or following an automatic forced-yield
  (see tune.lua.forced-yield) and that it will be resumed later when the
  related task is set for rescheduling. Not all lua handlers may yield: we have
  to make a distinction between yieldable handlers and unyieldable handlers.

  For yieldable handlers (tasks, actions..), reaching the timeout means
  "tune.lua.forced-yield" might be too high for the system, reducing it
  could improve the situation, but it could also be a good idea to check if
  adding manual yields at some key points within the lua function helps or not.
  It may also indicate that the handler is spending too much time in a specific
  lua library function that cannot be interrupted.

  For unyieldable handlers (lua converters, sample fetches), it could simply
  indicate that the handler is doing too much computation, which could result
  from an improper design given that such handlers, which often block the
  request execution flow, are expected to terminate quickly to allow the
  request processing to go through. A common resolution approach here would be
  to try to better optimize the lua function for speed since decreasing
  "tune.lua.forced-yield" won't help.

  This timeout only counts the pure Lua runtime. If the Lua does a core.sleep,
  the sleeping time is not taken in account. The default timeout is 1000ms.

  Note: if a lua GC cycle is initiated from the handler (either explicitly
  requested or automatically triggered by lua after some time), the GC cycle
  time will also be accounted for.

  Indeed, there is no way to deduce the GC cycle time, so this could lead to
  some false positives on saturated systems (where GC is having hard time to
  catch up and consumes most of the available execution runtime). If it were
  to be the case, here are some resolution leads:

    - checking if the script could be optimized to reduce lua memory footprint
    - fine-tuning lua GC parameters and / or requesting manual GC cycles
      (see: https://www.lua.org/manual/5.4/manual.html#pdf-collectgarbage)
    - increasing tune.lua.burst-timeout

  Setting value to 0 completely disables this protection.

tune.lua.forced-yield <number>
  This directive forces the Lua engine to execute a yield each <number> of
  instructions executed. This permits interrupting a long script and allows the
  HAProxy scheduler to process other tasks like accepting connections or
  forwarding traffic. The default value is 10000 instructions for scripts loaded
  using "lua-load-per-thread" and MAX(500, 10000 / nbthread) instructions for
  scripts loaded using "lua-load" (it was found to be an optimal value for
  performance while taking care of not creating thread contention with multiple
  threads competing for the global lua lock).

  If HAProxy often executes some Lua code but more responsiveness is required,
  this value can be lowered. If the Lua code is quite long and its result is
  absolutely required to process the data, the <number> can be increased, but
  the value should be set wisely as in multithreading context it could increase
  contention.

tune.lua.log.loggers { on | off }
  Enables ('on') or disables ('off') logging the output of LUA scripts via the
  loggers applicable to the current proxy, if any.

  Defaults to 'on'.

tune.lua.log.stderr { on | auto | off }
  Enables ('on') or disables ('off') logging the output of LUA scripts via
  stderr.
  When set to 'auto', logging via stderr is conditionally 'on' if any of:

    - tune.lua.log.loggers is set to 'off'
    - the script is executed in a non-proxy context with no global logger
    - the script is executed in a proxy context with no logger attached

  Please note that, when enabled, this logging is in addition to the logging
  configured via tune.lua.log.loggers.

  Defaults to 'auto'.

tune.lua.maxmem <number>
  Sets the maximum amount of RAM in megabytes per process usable by Lua. By
  default it is zero which means unlimited. It is important to set a limit to
  ensure that a bug in a script will not result in the system running out of
  memory.

tune.lua.service-timeout <timeout>
  This is the execution timeout for the Lua services. This is useful for
  preventing infinite loops or spending too much time in Lua. This timeout
  counts only the pure Lua runtime. If the Lua does a sleep, the sleep is
  not taken in account. The default timeout is 4s.

tune.lua.session-timeout <timeout>
  This is the execution timeout for the Lua sessions. This is useful for
  preventing infinite loops or spending too much time in Lua. This timeout
  counts only the pure Lua runtime. If the Lua does a sleep, the sleep is
  not taken in account. The default timeout is 4s.

tune.lua.task-timeout <timeout>
  Purpose is the same as "tune.lua.session-timeout", but this timeout is
  dedicated to the tasks. By default, this timeout isn't set because a task may
  remain alive during of the lifetime of HAProxy. For example, a task used to
  check servers.

tune.max-checks-per-thread <number>
  Sets the number of active checks per thread above which a thread will
  actively try to search a less loaded thread to run the health check, or
  queue it until the number of active checks running on it diminishes. The
  default value is zero, meaning no such limit is set. It may be needed in
  certain environments running an extremely large number of expensive checks
  with many threads when the load appears unequal and may make health checks
  to randomly time out on startup, typically when using OpenSSL 3.0 which is
  about 20 times more CPU-intensive on health checks than older ones. This will
  have for result to try to level the health check work across all threads. The
  vast majority of configurations do not need to touch this parameter. Please
  note that too low values may significantly slow down the health checking if
  checks are slow to execute.

tune.maxaccept <number>
  Sets the maximum number of consecutive connections a process may accept in a
  row before switching to other work. In single process mode, higher numbers
  used to give better performance at high connection rates, though this is not
  the case anymore with the multi-queue. This value applies individually to
  each listener, so that the number of processes a listener is bound to is
  taken into account. This value defaults to 4 which showed best results. If a
  significantly higher value was inherited from an ancient config, it might be
  worth removing it as it will both increase performance and lower response
  time. In multi-process mode, it is divided by twice the number of processes
  the listener is bound to. Setting this value to -1 completely disables the
  limitation. It should normally not be needed to tweak this value.

tune.maxpollevents <number>
  Sets the maximum amount of events that can be processed at once in a call to
  the polling system. The default value is adapted to the operating system. It
  has been noticed that reducing it below 200 tends to slightly decrease
  latency at the expense of network bandwidth, and increasing it above 200
  tends to trade latency for slightly increased bandwidth. The configured value
  must be lower than or equal to 1000000.

tune.maxrewrite <number>
  Sets the reserved buffer space to this size in bytes. The reserved space is
  used for header rewriting or appending. The first reads on sockets will never
  fill more than bufsize-maxrewrite. Historically it has defaulted to half of
  bufsize, though that does not make much sense since there are rarely large
  numbers of headers to add. Setting it too high prevents processing of large
  requests or responses. Setting it too low prevents addition of new headers
  to already large requests or to POST requests. It is generally wise to set it
  to about 1024. It is automatically readjusted to half of bufsize if it is
  larger than that. This means you don't have to worry about it when changing
  bufsize.

tune.max-rules-at-once <number>
  Sets the maximum number of rules that can be evaluated at once in ruleset
  evaluating functions, provided that they support yielding. Indeed, it is
  not rare to see configurations with a large number of "tcp-request content"
  or "http-request" rules for instance. A large number of rules combined with
  cpu-demanding actions (e.g.: actions that work on content) may create thread
  contention as all the rules from a given ruleset are evaluated under the same
  polling loop if the evaluation is not interrupted. This option ensures that no
  more than <number> number of rules may be executed under the same polling
  loop for content-oriented rulesets (those that already support yielding due
  to content inspection). What it does is that it forces the evaluating function
  to yield, so that it comes back on the next polling loop to continues the
  evaluation.

  Affected rulesets are:
   - "tcp-request content"
   - "tcp-response content"
   - "http-request"
   - "http-response"

  The default value is 50.

tune.memory.hot-size <number>
  Sets the per-thread amount of memory that will be kept hot in the local cache
  and will never be recoverable by other threads. Access to this memory is very
  fast (lockless), and having enough is critical to maintain a good performance
  level under extreme thread contention. The value is expressed in bytes, and
  the default value is configured at build time via CONFIG_HAP_POOL_CACHE_SIZE
  which defaults to 524288 (512 kB). A larger value may increase performance in
  some usage scenarios, especially when performance profiles show that memory
  allocation is stressed a lot. Experience shows that a good value sits between
  once to twice the per CPU core L2 cache size. Too large values will have a
  negative impact on performance by making inefficient use of the L3 caches in
  the CPUs, and will consume larger amounts of memory. It is recommended not to
  change this value, or to proceed in small increments. In order to completely
  disable the per-thread CPU caches, using a very small value could work, but
  it is better to use "-dMno-cache" on the command-line.

tune.notsent-lowat.client <size>
tune.notsent-lowat.server <size>
  Adjusts the kernel's per-socket buffering so as to report that the sending
  side of a socket is full once the amount of buffered data equals this value
  plus the measured window size. The principle is to let the strict minimum
  needed amount of bytes in socket buffers, plus a small margin corresponding
  to what would be sent by the time haproxy tries to send again. Setting this
  to a low value (typically around tune.bufsize) allows to significantly reduce
  the memory consumption in system buffers, and reduce the application level
  latency incurred by flushing buffered data. This generally represents a more
  effective and more accurate setting than tune.sndbuf.client and
  tune.sndbuf.client for systems supporting it. This applies per connection
  (connection from a client or connection to a server depending on the setting)
  and is only used by TCP connections. The default is zero, which means
  unlimited. This is only available on Linux.

tune.pattern.cache-size <number>
  Sets the size of the pattern lookup cache to <number> entries. This is an LRU
  cache which reminds previous lookups and their results. It is used by ACLs
  and maps on slow pattern lookups, namely the ones using the "sub", "reg",
  "dir", "dom", "end", "bin" match methods as well as the case-insensitive
  strings. It applies to pattern expressions which means that it will be able
  to memorize the result of a lookup among all the patterns specified on a
  configuration line (including all those loaded from files). It automatically
  invalidates entries which are updated using HTTP actions or on the CLI. The
  default cache size is set to 10000 entries, which limits its footprint to
  about 5 MB per process/thread on 32-bit systems and 8 MB per process/thread
  on 64-bit systems, as caches are thread/process local. There is a very low
  risk of collision in this cache, which is in the order of the size of the
  cache divided by 2^64. Typically, at 10000 requests per second with the
  default cache size of 10000 entries, there's 1% chance that a brute force
  attack could cause a single collision after 60 years, or 0.1% after 6 years.
  This is considered much lower than the risk of a memory corruption caused by
  aging components. If this is not acceptable, the cache can be disabled by
  setting this parameter to 0.

tune.peers.max-updates-at-once <number>
  Sets the maximum number of stick-table updates that haproxy will try to
  process at once when sending messages. Retrieving the data for these updates
  requires some locking operations which can be CPU intensive on highly
  threaded machines if unbound, and may also increase the traffic latency
  during the initial batched transfer between an older and a newer process.
  Conversely low values may also incur higher CPU overhead, and take longer
  to complete. The default value is 200 and it is suggested not to change it.

tune.pipesize <size>
  Sets the kernel pipe buffer size to this size (in bytes). By default, pipes
  are the default size for the system. But sometimes when using TCP splicing,
  it can improve performance to increase pipe sizes, especially if it is
  suspected that pipes are not filled and that many calls to splice() are
  performed. This has an impact on the kernel's memory footprint, so this must
  not be changed if impacts are not understood.

tune.pool-high-fd-ratio <number>
  This setting sets the max number of file descriptors (in percentage) used by
  HAProxy globally against the maximum number of file descriptors HAProxy can
  use before we start killing idle connections when we can't reuse a connection
  and we have to create a new one. The default is 25 (one quarter of the file
  descriptor will mean that roughly half of the maximum front connections can
  keep an idle connection behind, anything beyond this probably doesn't make
  much sense in the general case when targeting connection reuse).

tune.pool-low-fd-ratio <number>
  This setting sets the max number of file descriptors (in percentage) used by
  HAProxy globally against the maximum number of file descriptors HAProxy can
  use before we stop putting connection into the idle pool for reuse. The
  default is 20.

tune.pt.zero-copy-forwarding { on | off }
  Enables ('on') of disabled ('off') the zero-copy forwarding of data for the
  pass-through multiplexer. To be used, the kernel splicing must also be
  configured. It is enabled by default.

  See also: tune.disable-zero-copy-forwarding, option splice-auto,
            option splice-request and option splice-response

tune.quic.cc-hystart { on | off }
  Enables ('on') or disabled ('off') the HyStart++ (RFC 9406) algorithm for
  QUIC connections used as a replacement for the slow start phase of congestion
  control algorithms which may cause high packet loss. It is disabled by default.

tune.quic.cc.cubic.min-losses <number>
  Defines how many lost packets are needed for the Cubic congestion control
  algorithm to really consider a loss event. Normally, any loss event is
  considered as the result of a congestion and is sufficient for Cubic to
  restart from a smaller window. But experiments show that there can be a
  variety of causes for losses that are not at all caused by congestion and
  that can simply be qualified of spurious losses, and for which adjusting the
  window will have no effect, except slowing communication down. Poor radio
  signal, out-of-order delivery, high CPU usage on a client causing random
  delays, as well as system timer imprecision can be among the common causes
  for this. This setting allows to make Cubic a bit more tolerant to spurious
  losses, by changing the minimum number of cumulated losses between two ACKs
  to be considered as a loss event, which defaults to 1. Some significant gains
  have been observed experimentally, but always accompanied with an aggravation
  of the bandwidth wasted on retransmits, and an increased risk of saturation
  of congested links. The value 2 may be used for short periods of time to
  compare some metrics. Never go beyond 2 without an expert's prior analysis of
  the situation. The default and minimum value is 1. Always use 1.

tune.quic.disable-tx-pacing
  Disables pacing support for QUIC emission. The purpose of pacing is to smooth
  emission of data to reduce network losses. In most scenario, it will
  significantly improve network throughput by avoiding retransmissions.
  However, it can be useful to deactivate it for networks with very high
  bandwidth/low latency characteristics to prevent unwanted delay and reduce
  CPU consumption.

  See also the "quic-cc-algo" bind option.

tune.quic.disable-udp-gso
  Disable UDP GSO emission. This kernel feature allows to emit multiple
  datagrams via a single system call which is more efficient for large
  transfer. It may be useful to disable it on developers suggestion when
  suspecting an issue on emission.

tune.quic.frontend.glitches-threshold <number>
  Sets the threshold for the number of glitches on a frontend connection, where
  that connection will automatically be killed. This allows to automatically
  kill misbehaving connections without having to write explicit rules for them.
  The default value is zero, indicating that no threshold is set so that no
  event will cause a connection to be closed. Beware that some QUIC clients may
  occasionally cause a few glitches over long lasting connection, so any non-
  zero value here should probably be in the hundreds or thousands to be
  effective without affecting slightly bogus clients. It is also possible to
  only kill connections when the CPU usage crosses a certain level, by using
  "tune.glitches.kill.cpu-usage".

  See also: fc_glitches, tune.glitches.kill.cpu-usage

tune.quic.frontend.max-data-size <size>
  This setting is the hard limit for the number of data bytes in flight over a
  QUIC frontend connection. It is reused as the value for the initial_max_data
  transport parameter. It directly impacts the upload bandwidth for the peer
  depending on the latency and the per-connection memory consumption in
  haproxy.

  By default, the value is set to 0, which indicates that it must be
  automatically generated as the product between max-streams-bidi and bufsize.
  This can be increased for example if a backend application relies on massive
  uploads over high latency networks.

  See also: "tune.quic.frontend.max-streams-bidi",
            "tune.quic.frontend.stream-data-ratio"

tune.quic.frontend.max-idle-timeout <timeout>
  Sets the QUIC max_idle_timeout transport parameters in milliseconds for
  frontends which determines the period of time after which a connection silently
  closes if it has remained inactive during an effective period of time deduced
  from the two max_idle_timeout values announced by the two endpoints:
    - the minimum of the two values if both are not null,
    - the maximum if only one of them is not null,
    - if both values are null, this feature is disabled.

  The default value is 30000.

tune.quic.frontend.max-streams-bidi <number>
  Sets the QUIC initial_max_streams_bidi transport parameter for frontends.
  This is the initial maximum number of bidirectional streams the remote peer
  will be authorized to open. This determines the number of concurrent client
  requests.

  The default value is 100. Note that if you reduces it, it can restrict the
  buffering capabilities of streams on receive, which would result in poor
  upload throughput. It can be corrected by increasing
  tune.quic.frontend.max-data-size setting.

  See also: "tune.quic.frontend.max-data-size",
            "tune.quic.frontend.stream-data-ratio"

tune.quic.frontend.max-tx-mem <size>
  Sets the maximum amount of memory usable by QUIC stack at the transport layer
  for emission. This serves both as a limit of in flight bytes and multiplexer
  output buffers. Note that to prevent threads contention this limit is not
  strictly enforced so it can be exceeded on some occasions. Also, each
  connection will always be able to use a window of at least 2 datagrams, so a
  proper maxconn should be used in conjunction.

tune.quic.frontend.stream-data-ratio  <0..100, in percent>
  This setting allows to configure the hard limit of the number of data bytes
  in flight over each stream. It is expressed as a percentage relative to
  "tune.quic.frontend.max-data-size" setting, with the result rounded up to
  bufsize.

  The default value is 90. This is suitable with the most frequent web
  scenario, where uploads is performed only for one or a few streams, whereas
  the rest are used for download only. If max-data-size connection limit
  remains at a reasonable level, it ensures that only a portion of opened
  streams can allocate to their maximum capacity.

  In the case of an application using many uploading streams in parallel and
  suffering from unfairness between these streams, it can make sense to reduce
  this ratio, to increase fairness and reduce the per-stream bandwidth.

  See also: "tune.quic.frontend.max-data-size",
            "tune.quic.frontend.max-streams-bidi"

tune.quic.frontend.default-max-window-size <size>
  Sets the default maximum window size for the congestion controller of a
  single QUIC connection. The value must be written as an integer with an
  optional suffix 'k', 'm' or 'g'. It must be between 10k and 4g.

  QUIC multiplexer also uses the current congestion window size to determine if
  it can allocate new stream buffers on data emission. As such, the maximum
  congestion window size also serves as a limit on this allocator.

  The default value is 480k.

  See also the "quic-cc-algo" bind option.

tune.quic.max-frame-loss <number>
  Sets the limit for which a single QUIC frame can be marked as lost. If
  exceeded, the connection is considered as failing and is closed immediately.

  The default value is 10.

tune.quic.reorder-ratio <0..100, in percent>
  The ratio applied to the packet reordering threshold calculated. It may
  trigger a high packet loss detection when too small.

  The default value is 50.

tune.quic.retry-threshold <number>
  Dynamically enables the Retry feature for all the configured QUIC listeners
  as soon as this number of half open connections is reached. A half open
  connection is a connection whose handshake has not already successfully
  completed or failed. To be functional this setting needs a cluster secret to
  be set, if not it will be silently ignored (see "cluster-secret" setting).
  This setting will be also silently ignored if the use of QUIC Retry was
  forced (see "quic-force-retry").

  The default value is 100.

  See https://www.rfc-editor.org/rfc/rfc9000.html#section-8.1.2 for more
  information about QUIC retry.

tune.quic.socket-owner { connection | listener }
  Specifies globally how QUIC connections will use socket for receive/send
  operations. Connections can share listener socket or each connection can
  allocate its own socket.

  When default "connection" value is set, a dedicated socket will be allocated
  by every QUIC connections. This option is the preferred one to achieve the
  best performance with a large QUIC traffic. This is also the only way to
  ensure soft-stop is conducted properly without data loss for QUIC connections
  and cases of transient errors during sendto() operation are handled
  efficiently. However, this relies on some advanced features from the UDP
  network stack. If your platform is deemed not compatible, haproxy will
  automatically switch to "listener" mode on startup. Please note that QUIC
  listeners running on privileged ports may require to run as uid 0, or some
  OS-specific tuning to permit the target uid to bind such ports, such as
  system capabilities. See also the "setcap" global directive.

  The "listener" value indicates that QUIC transfers will occur on the shared
  listener socket. This option can be a good compromise for small traffic as it
  allows to reduce FD consumption. However, performance won't be optimal due to
  a higher CPU usage if listeners are shared across a lot of threads or a
  large number of QUIC connections can be used simultaneously.

  This setting is applied in conjunction with each "quic-socket" bind options.
  If "connection" mode is used on global tuning, it will be activated for each
  listener, unless its bind option is set to "listener". However, if "listener"
  is used globally, it will be forced on every listener instance, regardless of
  their individual configuration.

tune.quic.zero-copy-fwd-send { on | off }
  Enables ('on') of disabled ('off') the zero-copy sends of data for the QUIC
  multiplexer. It is enabled by default.

  See also: tune.disable-zero-copy-forwarding

tune.renice.runtime <number>
  This configuration option takes a value between -20 and 19. It applies a
  scheduling priority as documented in man 2 setpriority. This priority is
  applied after the configuration parsing, which means only the worker or the
  standalone process will apply it. It is usually configured to set a higher
  priority than a process doing configuration parsing (tune.renice.startup).

  See also: tune.renice.startup

tune.renice.startup <number>
  This configuration option takes a value between -20 and 19. It applies a
  scheduling priority as documented in man 2 setpriority. This priority is
  applied before applying the rest of the configuration which can be useful if
  you want to lower the priority for configuration parsing. This is applied on
  the standalone process or the worker before configuration parsing. Once the
  configuration is parsed, the previous priority is restored unless
  tune.renice.runtime is used.

  See also: tune.renice.runtime

tune.rcvbuf.backend  <size>
tune.rcvbuf.frontend <size>
  For the kernel socket receive buffer size on non-connected sockets to this
  size. This can be used QUIC in listener mode and log-forward on the frontend.
  The default system buffers might sometimes be too small for sockets receiving
  lots of aggregated traffic, causing some losses and possibly retransmits (in
  case of QUIC), possibly slowing down connection establishment under heavy
  traffic. The value is expressed in bytes, applied to each socket. In listener
  mode, sockets are shared between all connections, and the total number of
  sockets depends on the "shards" value of the "bind" line. There's no good
  value, a good one corresponds to an expected size per connection multiplied
  by the expected number of connections. The kernel may trim large values. See
  also "tune.rcvbuf.client" and "tune.rcvbuf.server" for their connected socket
  counter parts, as well as "tune.sndbuf.backend" and "tune.sndbuf.frontend"
  for the send setting.

tune.rcvbuf.client <size>
tune.rcvbuf.server <size>
  Forces the kernel socket receive buffer size on the client or the server side
  to the specified value in bytes. This value applies to all TCP/HTTP frontends
  and backends. It should normally never be set, and the default size (0) lets
  the kernel auto-tune this value depending on the amount of available memory.
  However it can sometimes help to set it to very low values (e.g. 4096) in
  order to save kernel memory by preventing it from buffering too large amounts
  of received data. Lower values will significantly increase CPU usage though.

tune.recv_enough <size>
  HAProxy uses some hints to detect that a short read indicates the end of the
  socket buffers. One of them is that a read returns more than <recv_enough>
  bytes, which defaults to 10136 (7 segments of 1448 each). This default value
  may be changed by this setting to better deal with workloads involving lots
  of short messages such as telnet or SSH sessions.

tune.ring.queues <number>
  Sets the number of write queues in front of ring buffers. This can have an
  effect on the CPU usage of traces during debugging sessions, and both too
  low or too large a value can have an important effect. The good value was
  determined experimentally by developers and there should be no reason to
  try to change it unless instructed to do so in order to try to address
  specific issues. Such a setting should not be left in the configuration
  across version upgrades because its optimal value may evolve over time.

tune.runqueue-depth <number>
  Sets the maximum amount of task that can be processed at once when running
  tasks. The default value depends on the number of threads but sits between 35
  and 280, which tend to show the highest request rates and lowest latencies.
  Increasing it may incur latency when dealing with I/Os, making it too small
  can incur extra overhead. Higher thread counts benefit from lower values.
  When experimenting with much larger values, it may be useful to also enable
  tune.sched.low-latency and possibly tune.fd.edge-triggered to limit the
  maximum latency to the lowest possible.

tune.sched.low-latency { on | off }
  Enables ('on') or disables ('off') the low-latency task scheduler. By default
  HAProxy processes tasks from several classes one class at a time as this is
  the most efficient. But when running with large values of tune.runqueue-depth
  this can have a measurable effect on request or connection latency. When this
  low-latency setting is enabled, tasks of lower priority classes will always
  be executed before other ones if they exist. This will permit to lower the
  maximum latency experienced by new requests or connections in the middle of
  massive traffic, at the expense of a higher impact on this large traffic.
  For regular usage it is better to leave this off. The default value is off.

tune.sndbuf.backend  <size>
tune.sndbuf.frontend <size>
  For the kernel socket send buffer size on non-connected sockets to this size.
  This can be used for UNIX socket and UDP logging on the backend side, and for
  QUIC in listener mode on the frontend. The default system buffers might
  sometimes be too small for sockets shared between many connections (or log
  senders), causing some losses and possibly retransmits, slowing down new
  connection establishment under high traffic. The value is expressed in bytes,
  applied to each socket. In listener mode, sockets are shared between all
  connections, and the total number of sockets depends on the "shards" value of
  the "bind" line. There's no good value, a good one corresponds to an expected
  size per connection multiplied by the expected number of connections. The
  kernel may trim large values. See also "tune.sndbuf.client" and
  "tune.sndbuf.server" for their connected socket counter parts, as well as
  "tune.rcvbuf.backend" and "tune.rcvbuf.frontend" for the receive setting.

tune.sndbuf.client <size>
tune.sndbuf.server <size>
  Forces the kernel socket send buffer size on the client or the server side to
  the specified value in bytes. This value applies to all TCP/HTTP frontends
  and backends. It should normally never be set, and the default size (0) lets
  the kernel auto-tune this value depending on the amount of available memory.
  However it can sometimes help to set it to very low values (e.g. 4096) in
  order to save kernel memory by preventing it from buffering too large amounts
  of received data. Lower values will significantly increase CPU usage though.
  Another use case is to prevent write timeouts with extremely slow clients due
  to the kernel waiting for a large part of the buffer to be read before
  notifying HAProxy again. See also tune.notsent-lowat.client and
  tune.notsent-lowat.server for more effective settings to more finely control
  memory usage and responsiveness on Linux without hurting performance.

tune.ssl.cachesize <number>
  Sets the size of the global SSL session cache, in a number of blocks. A block
  is large enough to contain an encoded session without peer certificate.  An
  encoded session with peer certificate is stored in multiple blocks depending
  on the size of the peer certificate. A block uses approximately 200 bytes of
  memory (based on `sizeof(struct sh_ssl_sess_hdr) + SHSESS_BLOCK_MIN_SIZE`
  calculation used for `shctx_init` function). The default value may be forced
  at build time, otherwise defaults to 20000. When the cache is full, the most
  idle entries are purged and reassigned. Higher values reduce the occurrence
  of such a purge, hence the number of CPU-intensive SSL handshakes by ensuring
  that all users keep their session as long as possible. All entries are
  pre-allocated upon startup. Setting this value to 0 disables the SSL session
  cache.

tune.ssl.capture-buffer-size <number>
tune.ssl.capture-cipherlist-size <number> (deprecated)
  Sets the maximum size of the buffer used for capturing client hello cipher
  list, extensions list, elliptic curves list and elliptic curve point
  formats. If the value is 0 (default value) the capture is disabled,
  otherwise a buffer is allocated for each SSL/TLS connection.

tune.ssl.certificate-compression { auto | off }
  This setting allows to configure the certificate compression support which is
  an extension (RFC 8879) to TLS 1.3.

  When set to "auto" it uses the default value of the TLS library.

  With "off" it tries to explicitely disable the support of the feature.
  HAProxy won't try to send compressed certificates anymore nor accept
  compressed certificates.

  Configures both backend and frontend sides.

  This keyword is supported by OpenSSL >= 3.2.0.

  The default value is auto.

tune.ssl.default-dh-param <number>
  Sets the maximum size of the Diffie-Hellman parameters used for generating
  the ephemeral/temporary Diffie-Hellman key in case of DHE key exchange. The
  final size will try to match the size of the server's RSA (or DSA) key (e.g,
  a 2048 bits temporary DH key for a 2048 bits RSA key), but will not exceed
  this maximum value. Only 1024 or higher values are allowed. Higher values
  will increase the CPU load, and values greater than 1024 bits are not
  supported by Java 7 and earlier clients. This value is not used if static
  Diffie-Hellman parameters are supplied either directly in the certificate
  file or by using the ssl-dh-param-file parameter.
  If there is neither a default-dh-param nor a ssl-dh-param-file defined, and
  if the server's PEM file of a given frontend does not specify its own DH
  parameters, then DHE ciphers will be unavailable for this frontend.

tune.ssl.force-private-cache
  This option disables SSL session cache sharing between all processes. It
  should normally not be used since it will force many renegotiations due to
  clients hitting a random process. But it may be required on some operating
  systems where none of the SSL cache synchronization method may be used. In
  this case, adding a first layer of hash-based load balancing before the SSL
  layer might limit the impact of the lack of session sharing.

tune.ssl.hard-maxrecord <number>
  Sets the maximum amount of bytes passed to SSL_write() at any time. Default
  value 0 means there is no limit. In contrast to tune.ssl.maxrecord this
  settings will not be adjusted dynamically. Smaller records may decrease
  throughput, but may be required when dealing with low-footprint clients.

tune.ssl.keylog { on | off }
  This option activates the logging of the TLS keys. It should be used with
  care as it will consume more memory per SSL session and could decrease
  performances. This is disabled by default.

  These sample fetches should be used to generate the SSLKEYLOGFILE that is
  required to decipher traffic with wireshark.

  https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/Key_Log_Format

  The SSLKEYLOG is a series of lines which are formatted this way:

    <Label> <space> <ClientRandom> <space> <Secret>

  The ClientRandom is provided by the %[ssl_fc_client_random,hex] sample
  fetch, the secret and the Label could be find in the array below. You need
  to generate a SSLKEYLOGFILE with all the labels in this array.

  The following sample fetches are hexadecimal strings and does not need to be
  converted.

  SSLKEYLOGFILE Label             |  Sample fetches for the Secrets
  --------------------------------|-----------------------------------------
  CLIENT_EARLY_TRAFFIC_SECRET     |  %[ssl_xx_client_early_traffic_secret]
  CLIENT_HANDSHAKE_TRAFFIC_SECRET |  %[ssl_xx_client_handshake_traffic_secret]
  SERVER_HANDSHAKE_TRAFFIC_SECRET |  %[ssl_xx_server_handshake_traffic_secret]
  CLIENT_TRAFFIC_SECRET_0         |  %[ssl_xx_client_traffic_secret_0]
  SERVER_TRAFFIC_SECRET_0         |  %[ssl_xx_server_traffic_secret_0]
  EXPORTER_SECRET                 |  %[ssl_xx_exporter_secret]
  EARLY_EXPORTER_SECRET           |  %[ssl_xx_early_exporter_secret]

  These fetches exists for frontend (fc) or backend (bc) sides, replace "xx" by
  "fc" or "bc" to use the right side.

  This is only available with OpenSSL 1.1.1, and useful with TLS1.3 session.

  If you want to generate the content of a SSLKEYLOGFILE with TLS < 1.3, you
  only need this line:

  "CLIENT_RANDOM %[ssl_fc_client_random,hex] %[ssl_fc_session_key,hex]"

  A complete keylog could be generate with a log-format these way, even though
  this is not ideal for syslog:

    log-format "CLIENT_EARLY_TRAFFIC_SECRET %[ssl_bc_client_random,hex] %[ssl_bc_client_early_traffic_secret]\n
                CLIENT_HANDSHAKE_TRAFFIC_SECRET %[ssl_bc_client_random,hex] %[ssl_bc_client_handshake_traffic_secret]\n
                SERVER_HANDSHAKE_TRAFFIC_SECRET %[ssl_bc_client_random,hex] %[ssl_bc_server_handshake_traffic_secret]\n
                CLIENT_TRAFFIC_SECRET_0 %[ssl_bc_client_random,hex] %[ssl_bc_client_traffic_secret_0]\n
                SERVER_TRAFFIC_SECRET_0 %[ssl_bc_client_random,hex] %[ssl_bc_server_traffic_secret_0]\n
                EXPORTER_SECRET %[ssl_bc_client_random,hex] %[ssl_bc_exporter_secret]\n
                EARLY_EXPORTER_SECRET %[ssl_bc_client_random,hex] %[ssl_bc_early_exporter_secret]"

tune.ssl.lifetime <timeout>
  Sets how long a cached SSL session may remain valid. This time is expressed
  in seconds and defaults to 300 (5 min). It is important to understand that it
  does not guarantee that sessions will last that long, because if the cache is
  full, the longest idle sessions will be purged despite their configured
  lifetime. The real usefulness of this setting is to prevent sessions from
  being used for too long.

tune.ssl.maxrecord <number>
  Sets the maximum amount of bytes passed to SSL_write() at the beginning of
  the data transfer. Default value 0 means there is no limit. Over SSL/TLS,
  the client can decipher the data only once it has received a full record.
  With large records, it means that clients might have to download up to 16kB
  of data before starting to process them. Limiting the value can improve page
  load times on browsers located over high latency or low bandwidth networks.
  It is suggested to find optimal values which fit into 1 or 2 TCP segments
  (generally 1448 bytes over Ethernet with TCP timestamps enabled, or 1460 when
  timestamps are disabled), keeping in mind that SSL/TLS add some overhead.
  Typical values of 1419 and 2859 gave good results during tests. Use
  "strace -e trace=write" to find the best value. HAProxy will automatically
  switch to this setting after an idle stream has been detected (see
  tune.idletimer above). See also tune.ssl.hard-maxrecord.

tune.ssl.ssl-ctx-cache-size <number>
  Sets the size of the cache used to store generated certificates to <number>
  entries. This is a LRU cache. Because generating a SSL certificate
  dynamically is expensive, they are cached. The default cache size is set to
  1000 entries.

tune.stick-counters <number>
  Sets the number of stick-counters that may be tracked at the same time by a
  connection or a request via "track-sc*" actions in "tcp-request" or
  "http-request" rules. The default value is set at build time by the macro
  MAX_SESS_STK_CTR, and defaults to 3. With this setting it is possible to
  change the value and ignore the one passed at build time. Increasing this
  value may be needed when porting complex configurations to haproxy, but users
  are warned against the costs: each entry takes 16 bytes per connection and
  16 bytes per request, all of which need to be allocated and zeroed for all
  requests even when not used. As such a value of 10 will inflate the memory
  consumption per request by 320 bytes and will cause this memory to be erased
  for each request, which does have measurable CPU impacts. Conversely, when
  no "track-sc" rules are used, the value may be lowered (0 being valid to
  entirely disable stick-counters).

tune.takeover-other-tg-connections <value>
  By default, we won't attempt to use idle connections from other thread groups.
  This can however be changed. Valid values for <value> are : "none", the
  default, if used, no attempt will be made to use idle connections from
  other thread groups, "restricted" where we will only attempt to get an idle
  connection from another thread if we're using protocols that can't create
  new connections, such as reverse http, as well as when using strict-maxconn,
  and "full" where we will always look in other thread groups for idle
  connections.
  Note that using connections from other thread groups can occur performance
  penalties, so it should not be used unless really needed.

tune.vars.global-max-size <size>
tune.vars.proc-max-size <size>
tune.vars.reqres-max-size <size>
tune.vars.sess-max-size <size>
tune.vars.txn-max-size <size>
  These five tunes help to manage the maximum amount of memory used by the
  variables system. "global" limits the overall amount of memory available for
  all scopes. "proc" limits the memory for the process scope, "sess" limits the
  memory for the session scope, "txn" for the transaction scope, and "reqres"
  limits the memory for each request or response processing.
  Memory accounting is hierarchical, meaning more coarse grained limits include
  the finer grained ones: "proc" includes "sess", "sess" includes "txn", and
  "txn" includes "reqres".

  For example, when "tune.vars.sess-max-size" is limited to 100,
  "tune.vars.txn-max-size" and "tune.vars.reqres-max-size" cannot exceed
  100 either. If we create a variable "txn.var" that contains 100 bytes,
  all available space is consumed.
  Notice that exceeding the limits at runtime will not result in an error
  message, but values might be cut off or corrupted. So make sure to accurately
  plan for the amount of space needed to store all your variables.

tune.zlib.memlevel <number>
  Sets the memLevel parameter in zlib initialization for each stream. It
  defines how much memory should be allocated for the internal compression
  state. A value of 1 uses minimum memory but is slow and reduces compression
  ratio, a value of 9 uses maximum memory for optimal speed. Can be a value
  between 1 and 9. The default value is 8.

tune.zlib.windowsize <number>
  Sets the window size (the size of the history buffer) as a parameter of the
  zlib initialization for each stream. Larger values of this parameter result
  in better compression at the expense of memory usage. Can be a value between
  8 and 15. The default value is 15.

3.3. Debugging
--------------

anonkey <key>
  This sets the global anonymizing key to <key>, which must be a 32-bit number
  between 0 and 4294967295. This is the key that will be used by default by CLI
  commands when anonymized mode is enabled. This key may also be set at runtime
  from the CLI command "set anon global-key". See also command line argument
  "-dC" in the management manual.

debug.counters { on | off }
  Enables ('on') or disables ('off') the updating of event counters in the
  code. These are the counters reported under the type "CNT" in the CLI command
  "debug counters". These counters are only available when the code was build
  with DEBUG_COUNTERS set to a value 1 or above. With the value 1, the counters
  are not updated by default ("debug.counters off"), and with value 2, they are
  updated by default ("debug.counters on"). There is normally no reason to
  change this setting unless a developer requests it, or unless it is suspected
  to consume abnormal amounts of CPU (in which case a report to developers is
  necessary with a dump of the counters). It is also possible to change this
  status at run time using the "debug counters" CLI command. Please consult the
  management manual.

force-cfg-parser-pause <timeout>
  This command is pausing the configuration parser for <timeout> milliseconds.
  This is useful for development or for testing timeouts of init scripts,
  particularly to simulate a very long reload.
  It requires the expose-experimental-directives to be set.

  <timeout> is the timeout value specified in milliseconds by default, but
              can be in any other unit if the number is suffixed by the unit,
              as explained at the top of this document.

  Example:

    global
        expose-experimental-directives
        force-cfg-parser-pause 10s

quick-exit
  This speeds up the old process exit upon reload by skipping the releasing of
  memory objects and listeners, since all of these are reclaimed by the
  operating system at the process' death. The gains are only marginal (in the
  order of a few hundred milliseconds for huge configurations at most). The
  main target usage in fact is when a bug is spotted in the deinit() code, as
  this allows to bypass it. It is better not to use this unless instructed to
  do so by developers.

quiet
  Do not display any message during startup. It is equivalent to the command-
  line argument "-q".

warn-blocked-traffic-after <time>
  This allows to adjust the delay after which a stuck task blocking the traffic
  will trigger the emission of a warning on the standard error output. The
  delay is expressed in milliseconds and defaults to 100 ms. Permitted values
  must be comprised between 1 ms and 1000 ms included. Lower values will
  trigger warnings frequently and higher ones will rarely. The watchdog will
  kill a runaway task that fails to respond twice for one second anyway, so a
  1000 ms warning delay will normally not trigger any warning. It is
  recommended to stay with values between 10 and 100ms to detect configuration
  anomalies that may degrade the user's experience, causing long response times
  or jerkiness on interactive sessions. For example, a poorly designed Lua
  sample-fetch function doing heavy computations, or a very large map_reg or
  map_regm map file with a very high evaluation cost may cause such trouble.
  For comparison a TLS handshake can eat between one and two milliseconds, and
  compressing a 16kB HTTP response buffer is around one millisecond. The output
  contains a thread dump of the offending task with a backtrace and some
  context that helps figure where the time is being spent.

zero-warning
  When this option is set, HAProxy will refuse to start if any warning was
  emitted while processing the configuration and applying it. It means that
  warnings about bad combinations of parameters, warnings about very high
  limits that couldn't be set, and so on, make the process exit with an error
  during startup. A few late startup warnings cannot be caught by this option,
  such as the failure to drop supplementary groups when changing the group ID
  in "daemon" or "master-worker" modes, or the failure to mark the process
  dumpable after the fork(). This option does not catch warnings emitted at
  runtime. It is highly recommended to set this option on configurations that
  are not changed often, as it helps to detect subtle mistakes and keep the
  configuration clean and forward-compatible. Note that "haproxy -c" will also
  report errors in such a case. This option is equivalent to command line
  argument "-dW".

3.4. HTTPClient tuning
----------------------

HTTPClient is an internal HTTP library, it can be used by various subsystems,
for example in LUA scripts. HTTPClient is not used in the data path, in other
words it has nothing with HTTP traffic passing through HAProxy.

httpclient.resolvers.disabled <on|off>
  Disable the DNS resolution of the httpclient. Prevent the creation of the
  "default" resolvers section.

  Default value is off.

httpclient.resolvers.id <resolvers id>
  This option defines the resolvers section with which the httpclient will try
  to resolve.

  Default option is the "default" resolvers ID. By default, if this option is
  not used, it will simply disable the resolving if the section is not found.

  However, when this option is explicitly enabled it will trigger a
  configuration error if it fails to load.

httpclient.resolvers.prefer <ipv4|ipv6>
  This option allows to chose which family of IP you want when resolving,
  which is convenient when IPv6 is not available on your network. Default
  option is "ipv6".

httpclient.retries <number>
  This option allows to configure the number of retries attempt of the
  httpclient when a request failed. This does the same as the "retries" keyword
  in a backend.

  Default value is 3.

httpclient.ssl.ca-file <cafile>
  This option defines the ca-file which should be used to verify the server
  certificate. It takes the same parameters as the "ca-file" option on the
  server line.

  By default and when this option is not used, the value is
  "@system-ca" which tries to load the CA of the system. If it fails the SSL
  will be disabled for the httpclient.

  However, when this option is explicitly enabled it will trigger a
  configuration error if it fails.

httpclient.ssl.verify [none|required]
  Works the same way as the verify option on server lines. If specified to 'none',
  servers certificates are not verified. Default option is "required".

  By default and when this option is not used, the value is
  "required". If it fails the SSL will be disabled for the httpclient.

  However, when this option is explicitly enabled it will trigger a
  configuration error if it fails.

httpclient.timeout.connect <timeout>
  Set the maximum time to wait for a connection attempt by default for the
  httpclient.

  Arguments :
    <timeout> is the timeout value specified in milliseconds by default, but
              can be in any other unit if the number is suffixed by the unit,
              as explained at the top of this document.

  The default value is 5000ms.


4. Proxies
----------

Proxy configuration can be located in a set of sections :
 - defaults [<name>] [ from <defaults_name> ]
 - frontend <name>   [ from <defaults_name> ]
 - backend  <name>   [ from <defaults_name> ]
 - listen   <name>   [ from <defaults_name> ]

A "frontend" section describes a set of listening sockets accepting client
connections.

A "backend" section describes a set of servers to which the proxy will connect
to forward incoming connections.

A "listen" section defines a complete proxy with its frontend and backend
parts combined in one section. It is generally useful for TCP-only traffic.

A "defaults" section resets all settings to the documented ones and presets new
ones for use by subsequent sections. All of "frontend", "backend" and "listen"
sections always take their initial settings from a defaults section, by default
the latest one that appears before the newly created section. It is possible to
explicitly designate a specific "defaults" section to load the initial settings
from by indicating its name on the section line after the optional keyword
"from". While "defaults" section do not impose a name, this use is encouraged
for better readability. It is also the only way to designate a specific section
to use instead of the default previous one. Since "defaults" section names are
optional, by default a very permissive check is applied on their name and these
are even permitted to overlap. However if a "defaults" section is referenced by
any other section, its name must comply with the syntax imposed on all proxy
names, and this name must be unique among the defaults sections. Please note
that regardless of what is currently permitted, it is recommended to avoid
duplicate section names in general and to respect the same syntax as for proxy
names. This rule might be enforced in a future version. In addition, a warning
is emitted if a defaults section is explicitly used by a proxy while it is also
implicitly used by another one because it is the last one defined. It is highly
encouraged to not mix both usages by always using explicit references or by
adding a last common defaults section reserved for all implicit uses.

Note that it is even possible for a defaults section to take its initial
settings from another one, and as such, inherit settings across multiple levels
of defaults sections. This can be convenient to establish certain configuration
profiles to carry groups of default settings (e.g. TCP vs HTTP or short vs long
timeouts) but can quickly become confusing to follow.

All proxy names must be formed from upper and lower case letters, digits,
'-' (dash), '_' (underscore) , '.' (dot) and ':' (colon). ACL names are
case-sensitive, which means that "www" and "WWW" are two different proxies.

Historically, all proxy names could overlap, it just caused troubles in the
logs. Since the introduction of content switching, it is mandatory that two
proxies with overlapping capabilities (frontend/backend) have different names.
However, it is still permitted that a frontend and a backend share the same
name, as this configuration seems to be commonly encountered.

Right now, two major proxy modes are supported : "tcp", also known as layer 4,
and "http", also known as layer 7. In layer 4 mode, HAProxy simply forwards
bidirectional traffic between two sides. In layer 7 mode, HAProxy analyzes the
protocol, and can interact with it by allowing, blocking, switching, adding,
modifying, or removing arbitrary contents in requests or responses, based on
arbitrary criteria.

In HTTP mode, the processing applied to requests and responses flowing over
a connection depends in the combination of the frontend's HTTP options and
the backend's. HAProxy supports 3 connection modes :

  - KAL : keep alive ("option http-keep-alive") which is the default mode : all
    requests and responses are processed, and connections remain open but idle
    between responses and new requests.

  - SCL: server close ("option http-server-close") : the server-facing
    connection is closed after the end of the response is received, but the
    client-facing connection remains open.

  - CLO: close ("option httpclose"): the connection is closed after the end of
    the response and "Connection: close" appended in both directions.

The effective mode that will be applied to a connection passing through a
frontend and a backend can be determined by both proxy modes according to the
following matrix, but in short, the modes are symmetric, keep-alive is the
weakest option and close is the strongest.

                   Backend mode

                | KAL | SCL | CLO
            ----+-----+-----+----
            KAL | KAL | SCL | CLO
            ----+-----+-----+----
   mode     SCL | SCL | SCL | CLO
            ----+-----+-----+----
            CLO | CLO | CLO | CLO

It is possible to chain a TCP frontend to an HTTP backend. It is pointless if
only HTTP traffic is handled. But it may be used to handle several protocols
within the same frontend. In this case, the client's connection is first handled
as a raw tcp connection before being upgraded to HTTP. Before the upgrade, the
content processings are performend on raw data. Once upgraded, data is parsed
and stored using an internal representation called HTX and it is no longer
possible to rely on raw representation. There is no way to go back.

There are two kind of upgrades, in-place upgrades and destructive upgrades. The
first ones involves a TCP to HTTP/1 upgrade. In HTTP/1, the request
processings are serialized, thus the applicative stream can be preserved. The
second one involves a TCP to HTTP/2 upgrade. Because it is a multiplexed
protocol, the applicative stream cannot be associated to any HTTP/2 stream and
is destroyed. New applicative streams are then created when HAProxy receives
new HTTP/2 streams at the lower level, in the H2 multiplexer. It is important
to understand this difference because that drastically changes the way to
process data. When an HTTP/1 upgrade is performed, the content processings
already performed on raw data are neither lost nor reexecuted while for an
HTTP/2 upgrade, applicative streams are distinct and all frontend rules are
evaluated systematically on each one. And as said, the first stream, the TCP
one, is destroyed, but only after the frontend rules were evaluated.

There is another importnat point to understand when HTTP processings are
performed from a TCP proxy. While HAProxy is able to parse HTTP/1 in-fly from
tcp-request content rules, it is not possible for HTTP/2. Only the HTTP/2
preface can be parsed. This is a huge limitation regarding the HTTP content
analysis in TCP. Concretely it is only possible to know if received data are
HTTP. For instance, it is not possible to choose a backend based on the Host
header value while it is trivial in HTTP/1. Hopefully, there is a solution to
mitigate this drawback.

There are two ways to perform an HTTP upgrade. The first one, the historical
method, is to select an HTTP backend. The upgrade happens when the backend is
set. Thus, for in-place upgrades, only the backend configuration is considered
in the HTTP data processing. For destructive upgrades, the applicative stream
is destroyed, thus its processing is stopped. With this method, possibilities
to choose a backend with an HTTP/2 connection are really limited, as mentioned
above, and a bit useless because the stream is destroyed. The second method is
to upgrade during the tcp-request content rules evaluation, thanks to the
"switch-mode http" action. In this case, the upgrade is performed in the
frontend context and it is possible to define HTTP directives in this
frontend. For in-place upgrades, it offers all the power of the HTTP analysis
as soon as possible. It is not that far from an HTTP frontend. For destructive
upgrades, it does not change anything except it is useless to choose a backend
on limited information. It is of course the recommended method. Thus, testing
the request protocol from the tcp-request content rules to perform an HTTP
upgrade is enough. All the remaining HTTP manipulation may be moved to the
frontend http-request ruleset. But keep in mind that tcp-request content rules
remains evaluated on each streams, that can't be changed.

4.1. Proxy keywords matrix
--------------------------

The following list of keywords is supported. Most of them may only be used in a
limited set of section types. Some of them are marked as "deprecated" because
they are inherited from an old syntax which may be confusing or functionally
limited, and there are new recommended keywords to replace them. Keywords
marked with "(*)" can be optionally inverted using the "no" prefix, e.g. "no
option contstats". This makes sense when the option has been enabled by default
and must be disabled for a specific instance. Such options may also be prefixed
with "default" in order to restore default settings regardless of what has been
specified in a previous "defaults" section. Keywords supported in defaults
sections marked with "(!)" are only supported in named defaults sections, not
anonymous ones.

Note: Some dangerous and not recommended directives are intentionnaly not
      listed in the following matrix. It is on purpose. These directives are
      documentated. But by not listing them below is one more way to discourage
      anyone to use it.


 keyword                              defaults   frontend   listen    backend
------------------------------------+----------+----------+---------+---------
acl                                       X (!)      X         X         X
backlog                                   X          X         X         -
balance                                   X          -         X         X
bind                                      -          X         X         -
capture cookie                            -          X         X         -
capture request header                    -          X         X         -
capture response header                   -          X         X         -
clitcpka-cnt                              X          X         X         -
clitcpka-idle                             X          X         X         -
clitcpka-intvl                            X          X         X         -
compression                               X          X         X         X
cookie                                    X          -         X         X
crt                                       -          X         X         -
declare capture                           -          X         X         -
default-server                            X          -         X         X
default_backend                           X          X         X         -
description                               -          X         X         X
disabled                                  X          X         X         X
dispatch                                  -          -         X         X
email-alert from                          X          X         X         X
email-alert level                         X          X         X         X
email-alert mailers                       X          X         X         X
email-alert myhostname                    X          X         X         X
email-alert to                            X          X         X         X
enabled                                   X          X         X         X
errorfile                                 X          X         X         X
errorfiles                                X          X         X         X
errorloc                                  X          X         X         X
errorloc302                               X          X         X         X
-- keyword -------------------------- defaults - frontend - listen -- backend -
errorloc303                               X          X         X         X
error-log-format                          X          X         X         -
force-persist                             -          -         X         X
filter                                    -          X         X         X
fullconn                                  X          -         X         X
guid                                      -          X         X         X
hash-balance-factor                       X          -         X         X
hash-preserve-affinity                    X          -         X         X
hash-type                                 X          -         X         X
http-after-response                       X (!)      X         X         X
http-check comment                        X          -         X         X
http-check connect                        X          -         X         X
http-check disable-on-404                 X          -         X         X
http-check expect                         X          -         X         X
http-check send                           X          -         X         X
http-check send-state                     X          -         X         X
http-check set-var                        X          -         X         X
http-check unset-var                      X          -         X         X
http-error                                X          X         X         X
http-request                              X (!)      X         X         X
http-response                             X (!)      X         X         X
http-reuse                                X          -         X         X
http-send-name-header                     X          -         X         X
id                                        -          X         X         X
ignore-persist                            -          -         X         X
load-server-state-from-file               X          -         X         X
log                                  (*)  X          X         X         X
log-format                                X          X         X         -
log-format-sd                             X          X         X         -
log-tag                                   X          X         X         X
log-steps                                 X          X         X         -
max-keep-alive-queue                      X          -         X         X
max-session-srv-conns                     X          X         X         -
maxconn                                   X          X         X         -
mode                                      X          X         X         X
monitor fail                              -          X         X         -
monitor-uri                               X          X         X         -
option abortonclose                  (*)  X          -         X         X
option allbackups                    (*)  X          -         X         X
option checkcache                    (*)  X          -         X         X
option clitcpka                      (*)  X          X         X         -
option contstats                     (*)  X          X         X         -
option disable-h2-upgrade            (*)  X          X         X         -
option dontlog-normal                (*)  X          X         X         -
option dontlognull                   (*)  X          X         X         -
-- keyword -------------------------- defaults - frontend - listen -- backend -
option forwardfor                         X          X         X         X
option forwarded                     (*)  X          -         X         X
option h1-case-adjust-bogus-client   (*)  X          X         X         -
option h1-case-adjust-bogus-server   (*)  X          -         X         X
option http-buffer-request           (*)  X          X         X         X
option http-drop-request-trailers    (*)  X          -         -         X
option http-drop-response-trailers   (*)  X          -         X         -
option http-ignore-probes            (*)  X          X         X         -
option http-keep-alive               (*)  X          X         X         X
option http-no-delay                 (*)  X          X         X         X
option http-pretend-keepalive        (*)  X          -         X         X
option http-restrict-req-hdr-names        X          X         X         X
option http-server-close             (*)  X          X         X         X
option http-use-proxy-header         (*)  X          X         X         -
option httpchk                            X          -         X         X
option httpclose                     (*)  X          X         X         X
option httplog                            X          X         X         -
option httpslog                           X          X         X         -
option independent-streams           (*)  X          X         X         X
option ldap-check                         X          -         X         X
option external-check                     X          -         X         X
option log-health-checks             (*)  X          -         X         X
option log-separate-errors           (*)  X          X         X         -
option logasap                       (*)  X          X         X         -
option mysql-check                        X          -         X         X
option nolinger                      (*)  X          X         X         X
option originalto                         X          X         X         X
option persist                       (*)  X          -         X         X
option pgsql-check                        X          -         X         X
option prefer-last-server            (*)  X          -         X         X
option redispatch                    (*)  X          -         X         X
option redis-check                        X          -         X         X
option smtpchk                            X          -         X         X
option socket-stats                  (*)  X          X         X         -
option splice-auto                   (*)  X          X         X         X
option splice-request                (*)  X          X         X         X
option splice-response               (*)  X          X         X         X
option spop-check                         X          -         X         X
option srvtcpka                      (*)  X          -         X         X
option ssl-hello-chk                      X          -         X         X
-- keyword -------------------------- defaults - frontend - listen -- backend -
option tcp-check                          X          -         X         X
option tcp-smart-accept              (*)  X          X         X         -
option tcp-smart-connect             (*)  X          -         X         X
option tcpka                              X          X         X         X
option tcplog                             X          X         X         -
option transparent                   (*)  X          -         X         X
option idle-close-on-response        (*)  X          X         X         -
external-check command                    X          -         X         X
external-check path                       X          -         X         X
persist rdp-cookie                        X          -         X         X
quic-initial                              X (!)      X         X         -
rate-limit sessions                       X          X         X         -
redirect                                  -          X         X         X
-- keyword -------------------------- defaults - frontend - listen -- backend -
retries                                   X          -         X         X
retry-on                                  X          -         X         X
server                                    -          -         X         X
server-state-file-name                    X          -         X         X
server-template                           -          -         X         X
source                                    X          -         X         X
srvtcpka-cnt                              X          -         X         X
srvtcpka-idle                             X          -         X         X
srvtcpka-intvl                            X          -         X         X
stats admin                               -          X         X         X
stats auth                                X          X         X         X
stats enable                              X          X         X         X
stats hide-version                        X          X         X         X
stats http-request                        -          X         X         X
stats realm                               X          X         X         X
stats refresh                             X          X         X         X
stats scope                               X          X         X         X
stats show-desc                           X          X         X         X
stats show-legends                        X          X         X         X
stats show-node                           X          X         X         X
stats uri                                 X          X         X         X
-- keyword -------------------------- defaults - frontend - listen -- backend -
stick match                               -          -         X         X
stick on                                  -          -         X         X
stick store-request                       -          -         X         X
stick store-response                      -          -         X         X
stick-table                               -          X         X         X
tcp-check comment                         X          -         X         X
tcp-check connect                         X          -         X         X
tcp-check expect                          X          -         X         X
tcp-check send                            X          -         X         X
tcp-check send-lf                         X          -         X         X
tcp-check send-binary                     X          -         X         X
tcp-check send-binary-lf                  X          -         X         X
tcp-check set-var                         X          -         X         X
tcp-check unset-var                       X          -         X         X
tcp-request connection                    X (!)      X         X         -
tcp-request content                       X (!)      X         X         X
tcp-request inspect-delay                 X (!)      X         X         X
tcp-request session                       X (!)      X         X         -
tcp-response content                      X (!)      -         X         X
tcp-response inspect-delay                X (!)      -         X         X
timeout check                             X          -         X         X
timeout client                            X          X         X         -
timeout client-fin                        X          X         X         -
timeout client-hs                         X          X         X         -
timeout connect                           X          -         X         X
timeout http-keep-alive                   X          X         X         X
timeout http-request                      X          X         X         X
timeout queue                             X          -         X         X
timeout server                            X          -         X         X
timeout server-fin                        X          -         X         X
timeout tarpit                            X          X         X         X
timeout tunnel                            X          -         X         X
transparent                 (deprecated)  X          -         X         X
unique-id-format                          X          X         X         -
unique-id-header                          X          X         X         -
use_backend                               -          X         X         -
use-fcgi-app                              -          -         X         X
use-server                                -          -         X         X
------------------------------------+----------+----------+---------+---------
 keyword                              defaults   frontend   listen    backend


4.2. Alphabetically sorted keywords reference
---------------------------------------------

This section provides a description of each keyword and its usage.


acl <aclname> <criterion> [flags] [operator] <value> ...
  Declare or complete an access list.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                yes(!) |    yes   |   yes  |   yes

  This directive is only available from named defaults sections, not anonymous
  ones. ACLs defined in a defaults section are not visible from other sections
  using it.

  Example:
        acl invalid_src  src          0.0.0.0/7 224.0.0.0/3
        acl invalid_src  src_port     0:1023
        acl local_dst    hdr(host) -i localhost

  See section 7 about ACL usage.


backlog <conns>
  Give hints to the system about the approximate listen backlog desired size

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments :
    <conns>   is the number of pending connections. Depending on the operating
              system, it may represent the number of already acknowledged
              connections, of non-acknowledged ones, or both.

  This option is only meaningful for stream listeners, including QUIC ones. Its
  behavior however is not identical with QUIC instances.

  For all listeners but QUIC, in order to protect against SYN flood attacks,
  one solution is to increase the system's SYN backlog size. Depending on the
  system, sometimes it is just tunable via a system parameter, sometimes it is
  not adjustable at all, and sometimes the system relies on hints given by the
  application at the time of the listen() syscall. By default, HAProxy passes
  the frontend's maxconn value to the listen() syscall. On systems which can
  make use of this value, it can sometimes be useful to be able to specify a
  different value, hence this backlog parameter.

  On Linux 2.4, the parameter is ignored by the system. On Linux 2.6, it is
  used as a hint and the system accepts up to the smallest greater power of
  two, and never more than some limits (usually 32768).

  For QUIC listeners, backlog sets a shared limits for both the maximum count
  of active handshakes and connections waiting to be accepted. The handshake
  phase relies primarily of the network latency with the remote peer, whereas
  the second phase depends solely on haproxy load. When either one of this
  limit is reached, haproxy starts to drop reception of INITIAL packets,
  preventing any new connection allocation, until the connection excess starts
  to decrease. This situation may cause browsers to silently downgrade the HTTP
  versions and switching to TCP.

  See also : "maxconn" and the target operating system's tuning guide.


balance <algorithm> [ <arguments> ]
balance url_param <param> [check_post]
  Define the load balancing algorithm to be used in a backend.

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <algorithm> is the algorithm used to select a server when doing load
                balancing. This only applies when no persistence information
                is available, or when a connection is redispatched to another
                server. <algorithm> may be one of the following :

      roundrobin  Each server is used in turns, according to their weights.
                  This is the smoothest and fairest algorithm when the server's
                  processing time remains equally distributed. This algorithm
                  is dynamic, which means that server weights may be adjusted
                  on the fly for slow starts for instance. It is limited by
                  design to 4095 active servers per backend. Note that in some
                  large farms, when a server becomes up after having been down
                  for a very short time, it may sometimes take a few hundreds
                  requests for it to be re-integrated into the farm and start
                  receiving traffic. This is normal, though very rare. It is
                  indicated here in case you would have the chance to observe
                  it, so that you don't worry. Note: weights are ignored for
                  backends in LOG mode.

      static-rr   Each server is used in turns, according to their weights.
                  This algorithm is as similar to roundrobin except that it is
                  static, which means that changing a server's weight on the
                  fly will have no effect. On the other hand, it has no design
                  limitation on the number of servers, and when a server goes
                  up, it is always immediately reintroduced into the farm, once
                  the full map is recomputed. It also uses slightly less CPU to
                  run (around -1%). This algorithm is not usable in LOG mode.

      leastconn   The server with the lowest number of connections receives the
                  connection. Round-robin is performed within groups of servers
                  of the same load to ensure that all servers will be used. Use
                  of this algorithm is recommended where very long sessions are
                  expected, such as LDAP, SQL, TSE, etc... but is not very well
                  suited for protocols using short sessions such as HTTP. This
                  algorithm is dynamic, which means that server weights may be
                  adjusted on the fly for slow starts for instance. It will
                  also consider the number of queued connections in addition to
                  the established ones in order to minimize queuing. This
                  algorithm is not usable in LOG mode.

      first       The first server with available connection slots receives the
                  connection. The servers are chosen from the lowest numeric
                  identifier to the highest (see server parameter "id"), which
                  defaults to the server's position in the farm. Once a server
                  reaches its maxconn value, the next server is used. It does
                  not make sense to use this algorithm without setting maxconn.
                  The purpose of this algorithm is to always use the smallest
                  number of servers so that extra servers can be powered off
                  during non-intensive hours. This algorithm ignores the server
                  weight, and brings more benefit to long session such as RDP
                  or IMAP than HTTP, though it can be useful there too. In
                  order to use this algorithm efficiently, it is recommended
                  that a cloud controller regularly checks server usage to turn
                  them off when unused, and regularly checks backend queue to
                  turn new servers on when the queue inflates. Alternatively,
                  using "http-check send-state" may inform servers on the load.
                  This algorithm is not usable in LOG mode.

      hash        Takes a regular sample expression in argument. The expression
                  is evaluated for each request and hashed according to the
                  configured hash-type. The result of the hash is divided by
                  the total weight of the running servers to designate which
                  server will receive the request. This can be used in place of
                  "source", "uri", "hdr()", "url_param()", "rdp-cookie" to make
                  use of a converter, refine the evaluation, or be used to
                  extract data from local variables for example. When the data
                  is not available, round robin will apply. This algorithm is
                  static by default, which means that changing a server's
                  weight on the fly will have no effect, but this can be
                  changed using "hash-type". This algorithm is not usable for
                  backends in LOG mode, please use "log-hash" instead.

      source      The source IP address is hashed and divided by the total
                  weight of the running servers to designate which server will
                  receive the request. This ensures that the same client IP
                  address will always reach the same server as long as no
                  server goes down or up. If the hash result changes due to the
                  number of running servers changing, many clients will be
                  directed to a different server. This algorithm is generally
                  used in TCP mode where no cookie may be inserted. It may also
                  be used on the Internet to provide a best-effort stickiness
                  to clients which refuse session cookies. This algorithm is
                  static by default, which means that changing a server's
                  weight on the fly will have no effect, but this can be
                  changed using "hash-type". See also the "hash" option above.
                  This algorithm is not usable for backends in LOG mode.

      uri         This algorithm hashes either the left part of the URI (before
                  the question mark) or the whole URI (if the "whole" parameter
                  is present) and divides the hash value by the total weight of
                  the running servers. The result designates which server will
                  receive the request. This ensures that the same URI will
                  always be directed to the same server as long as no server
                  goes up or down. This is used with proxy caches and
                  anti-virus proxies in order to maximize the cache hit rate.
                  Note that this algorithm may only be used in an HTTP backend.
                  This algorithm is static by default, which means that
                  changing a server's weight on the fly will have no effect,
                  but this can be changed using "hash-type".

                  This algorithm supports two optional parameters "len" and
                  "depth", both followed by a positive integer number. These
                  options may be helpful when it is needed to balance servers
                  based on the beginning of the URI only. The "len" parameter
                  indicates that the algorithm should only consider that many
                  characters at the beginning of the URI to compute the hash.
                  Note that having "len" set to 1 rarely makes sense since most
                  URIs start with a leading "/".

                  The "depth" parameter indicates the maximum directory depth
                  to be used to compute the hash. One level is counted for each
                  slash in the request. If both parameters are specified, the
                  evaluation stops when either is reached.

                  A "path-only" parameter indicates that the hashing key starts
                  at the first '/' of the path. This can be used to ignore the
                  authority part of absolute URIs, and to make sure that HTTP/1
                  and HTTP/2 URIs will provide the same hash. See also the
                  "hash" option above.

      url_param   The URL parameter specified in argument will be looked up in
                  the query string of each HTTP GET request.

                  If the modifier "check_post" is used, then an HTTP POST
                  request entity will be searched for the parameter argument,
                  when it is not found in a query string after a question mark
                  ('?') in the URL. The message body will only start to be
                  analyzed once either the advertised amount of data has been
                  received or the request buffer is full. In the unlikely event
                  that chunked encoding is used, only the first chunk is
                  scanned. Parameter values separated by a chunk boundary, may
                  be randomly balanced if at all. This keyword used to support
                  an optional <max_wait> parameter which is now ignored.

                  If the parameter is found followed by an equal sign ('=') and
                  a value, then the value is hashed and divided by the total
                  weight of the running servers. The result designates which
                  server will receive the request.

                  This is used to track user identifiers in requests and ensure
                  that a same user ID will always be sent to the same server as
                  long as no server goes up or down. If no value is found or if
                  the parameter is not found, then a round robin algorithm is
                  applied. Note that this algorithm may only be used in an HTTP
                  backend. This algorithm is static by default, which means
                  that changing a server's weight on the fly will have no
                  effect, but this can be changed using "hash-type". See also
                  the "hash" option above.

      hdr(<name>) The HTTP header <name> will be looked up in each HTTP
                  request. Just as with the equivalent ACL 'hdr()' function,
                  the header name in parenthesis is not case sensitive. If the
                  header is absent or if it does not contain any value, the
                  roundrobin algorithm is applied instead.

                  An optional 'use_domain_only' parameter is available, for
                  reducing the hash algorithm to the main domain part with some
                  specific headers such as 'Host'. For instance, in the Host
                  value "haproxy.1wt.eu", only "1wt" will be considered.

                  This algorithm is static by default, which means that
                  changing a server's weight on the fly will have no effect,
                  but this can be changed using "hash-type". See also the
                  "hash" option above.

      random
      random(<draws>)
                  A random number will be used as the key for the consistent
                  hashing function. This means that the servers' weights are
                  respected, dynamic weight changes immediately take effect, as
                  well as new server additions. Random load balancing can be
                  useful with large farms or when servers are frequently added
                  or removed as it may avoid the hammering effect that could
                  result from roundrobin or leastconn in this situation. The
                  hash-balance-factor directive can be used to further improve
                  fairness of the load balancing, especially in situations
                  where servers show highly variable response times. When an
                  argument <draws> is present, it must be an integer value one
                  or greater, indicating the number of draws before selecting
                  the least loaded of these servers. It was indeed demonstrated
                  that picking the least loaded of two servers is enough to
                  significantly improve the fairness of the algorithm, by
                  always avoiding to pick the most loaded server within a farm
                  and getting rid of any bias that could be induced by the
                  unfair distribution of the consistent list. Higher values N
                  will take away N-1 of the highest loaded servers at the
                  expense of performance. With very high values, the algorithm
                  will converge towards the leastconn's result but much slower.
                  The default value is 2, which generally shows very good
                  distribution and performance. This algorithm is also known as
                  the Power of Two Random Choices and is described here :
                  http://www.eecs.harvard.edu/~michaelm/postscripts/handbook2001.pdf

                  For backends in LOG mode, the number of draws is ignored and
                  a single random is picked since there is no notion of server
                  load. Random log balancing can be useful with large farms or
                  when servers are frequently added or removed from the pool of
                  available servers as it may avoid the hammering effect that
                  could result from roundrobin in this situation.

      rdp-cookie
      rdp-cookie(<name>)
                  The RDP cookie <name> (or "mstshash" if omitted) will be
                  looked up and hashed for each incoming TCP request. Just as
                  with the equivalent ACL 'req.rdp_cookie()' function, the name
                  is not case-sensitive. This mechanism is useful as a degraded
                  persistence mode, as it makes it possible to always send the
                  same user (or the same session ID) to the same server. If the
                  cookie is not found, the normal roundrobin algorithm is
                  used instead.

                  Note that for this to work, the frontend must ensure that an
                  RDP cookie is already present in the request buffer. For this
                  you must use 'tcp-request content accept' rule combined with
                  a 'req.rdp_cookie_cnt' ACL.

                  This algorithm is static by default, which means that
                  changing a server's weight on the fly will have no effect,
                  but this can be changed using "hash-type". See also the
                  "hash" option above.

      log-hash    Takes a comma-delimited list of converters in argument. These
                  converters are applied in sequence to the input log message,
                  and the result will be cast as a string then hashed according
                  to the configured hash-type. The resulting hash will be used
                  to select the destination server among the ones declared in
                  the log backend. The goal of this algorithm is to be able to
                  extract a key within the final log message using string
                  converters and then be able to stick to the same server thanks
                  to the hash. Only "map-based" hashes are supported for now.
                  This algorithm is only usable for backends in LOG mode, for
                  others, please use "hash" instead.

      sticky      Tries to stick to the same server as much as possible. The
                  first server in the list of available servers receives all
                  the log messages. When the server goes DOWN, the next server
                  in the list takes its place. When a previously DOWN server
                  goes back UP it is added at the end of the list so that the
                  sticky server doesn't change until it becomes DOWN.

    <arguments> is an optional list of arguments which may be needed by some
                algorithms. Right now, only "url_param", "uri" and "log-hash"
                support an optional argument.

  The load balancing algorithm of a backend is set to roundrobin when no other
  algorithm, mode nor option have been set. The algorithm may only be set once
  for each backend.

  With authentication schemes that require the same connection like NTLM, URI
  based algorithms must not be used, as they would cause subsequent requests
  to be routed to different backend servers, breaking the invalid assumptions
  NTLM relies on.

  TCP/HTTP Examples :
        balance roundrobin
        balance url_param userid
        balance url_param session_id check_post 64
        balance hdr(User-Agent)
        balance hdr(host)
        balance hdr(Host) use_domain_only
        balance hash req.cookie(clientid)
        balance hash var(req.client_id)
        balance hash req.hdr_ip(x-forwarded-for,-1),ipmask(24)

  LOG backend examples:
        global
          log backend@mylog-rrb local0 # send all logs to mylog-rrb backend
          log backend@mylog-hash local0 # send all logs to mylog-hash backend

        backend mylog-rrb
          mode log
          balance roundrobin

          server s1 udp@127.0.0.1:514 # will receive 50% of log messages
          server s2 udp@127.0.0.1:514

        backend mylog-hash
          mode log

          # extract "METHOD URL PROTO" at the end of the log message,
          # and let haproxy hash it so that log messages generated from
          # similar requests get sent to the same syslog server:
          balance log-hash 'field(-2,\")'

          # server list here
          server s1 127.0.0.1:514
          #...

  Note: the following caveats and limitations on using the "check_post"
  extension with "url_param" must be considered :

    - all POST requests are eligible for consideration, because there is no way
      to determine if the parameters will be found in the body or entity which
      may contain binary data. Therefore another method may be required to
      restrict consideration of POST requests that have no URL parameters in
      the body. (see acl http_end)

    - using a <max_wait> value larger than the request buffer size does not
      make sense and is useless. The buffer size is set at build time, and
      defaults to 16 kB.

    - Content-Encoding is not supported, the parameter search will probably
      fail; and load balancing will fall back to Round Robin.

    - Expect: 100-continue is not supported, load balancing will fall back to
      Round Robin.

    - Transfer-Encoding (RFC7230 3.3.1) is only supported in the first chunk.
      If the entire parameter value is not present in the first chunk, the
      selection of server is undefined (actually, defined by how little
      actually appeared in the first chunk).

    - This feature does not support generation of a 100, 411 or 501 response.

    - In some cases, requesting "check_post" MAY attempt to scan the entire
      contents of a message body. Scanning normally terminates when linear
      white space or control characters are found, indicating the end of what
      might be a URL parameter list. This is probably not a concern with SGML
      type message bodies.

  See also : "dispatch", "cookie", "transparent", "hash-type".


bind [<address>]:<port_range> [, ...] [param*]
bind /<path> [, ...] [param*]
  Define one or several listening addresses and/or ports in a frontend.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                  no   |    yes   |   yes  |   no

  Arguments :
    <address>     is optional and can be a host name, an IPv4 address, an IPv6
                  address, or '*'. It designates the address the frontend will
                  listen on. If unset, all IPv4 addresses of the system will be
                  listened on. The same will apply for '*' or the system's
                  special address "0.0.0.0". The IPv6 equivalent is '::'. Note
                  that for UDP, specific OS features are required when binding
                  on multiple addresses to ensure the correct network interface
                  and source address will be used on response. In other way,
                  for QUIC listeners only bind on multiple addresses if running
                  with a modern enough systems.

                  Optionally, an address family prefix may be used before the
                  address to force the family regardless of the address format,
                  which can be useful to specify a path to a unix socket with
                  no slash ('/'). Currently supported prefixes are :
                    - 'ipv4@'  -> address is always IPv4
                    - 'ipv6@'  -> address is always IPv6
                    - 'udp@'   -> address is resolved as IPv4 or IPv6 and
                      protocol UDP is used. Currently those listeners are
                      supported only in log-forward sections.
                    - 'udp4@'  -> address is always IPv4 and protocol UDP
                      is used. Currently those listeners are supported
                      only in log-forward sections.
                    - 'udp6@'  -> address is always IPv6 and protocol UDP
                      is used. Currently those listeners are supported
                      only in log-forward sections.
                    - 'unix@'  -> address is a path to a local unix socket
                    - 'abns@'  -> address is in abstract namespace (Linux only).
                    - 'abnsz@'  -> address is in abstract namespace (Linux only)
                       but it is explicitly zero-terminated. This means no \0
                       padding is used to complete sun_path. It is useful to
                       interconnect with programs that don't implement the
                       default abns naming logic that haproxy uses.
                    - 'fd@<n>' -> use file descriptor <n> inherited from the
                      parent. The fd must be bound and may or may not already
                      be listening.
                    - 'sockpair@<n>'-> like fd@ but you must use the fd of a
                      connected unix socket or of a socketpair. The bind waits
                      to receive a FD over the unix socket and uses it as if it
                      was the FD of an accept(). Should be used carefully.
                    - 'quic4@' -> address is resolved as IPv4 and protocol UDP
                      is used. Note that to achieve the best performance with a
                      large traffic you should keep "tune.quic.socket-owner" on
                      connection. Else QUIC connections will be multiplexed
                      over the listener socket. Another alternative would be to
                      duplicate QUIC listener instances over several threads,
                      for example using "shards" keyword to at least reduce
                      thread contention.
                    - 'quic6@' -> address is resolved as IPv6 and protocol UDP
                      is used. The performance note for QUIC over IPv4 applies
                      as well.
                    - 'rhttp@' [ EXPERIMENTAL ] -> used for reverse HTTP.
                      Address must be a server with the format
                      '<backend>/<server>'. The server will be used to
                      instantiate connections to a remote address. The listener
                      will try to maintain "nbconn" connections. This is an
                      experimental features which requires
                      "expose-experimental-directives" on a line before this
                      bind.

                  You may want to reference some environment variables in the
                  address parameter, see section 2.3 about environment
                  variables.

    <port_range>  is either a unique TCP port, or a port range for which the
                  proxy will accept connections for the IP address specified
                  above. The port is mandatory for TCP listeners. Note that in
                  the case of an IPv6 address, the port is always the number
                  after the last colon (':'). A range can either be :
                   - a numerical port (ex: '80')
                   - a dash-delimited ports range explicitly stating the lower
                     and upper bounds (ex: '2000-2100') which are included in
                     the range.

                  Particular care must be taken against port ranges, because
                  every <address:port> couple consumes one socket (= a file
                  descriptor), so it's easy to consume lots of descriptors
                  with a simple range, and to run out of sockets. Also, each
                  <address:port> couple must be used only once among all
                  instances running on a same system. Please note that binding
                  to ports lower than 1024 generally require particular
                  privileges to start the program, which are independent of
                  the 'uid' parameter.

    <path>        is a UNIX socket path beginning with a slash ('/'). This is
                  alternative to the TCP listening port. HAProxy will then
                  receive UNIX connections on the socket located at this place.
                  The path must begin with a slash and by default is absolute.
                  It can be relative to the prefix defined by "unix-bind" in
                  the global section. Note that the total length of the prefix
                  followed by the socket path cannot exceed some system limits
                  for UNIX sockets, which commonly are set to 107 characters.

    <param*>      is a list of parameters common to all sockets declared on the
                  same line. These numerous parameters depend on OS and build
                  options and have a complete section dedicated to them. Please
                  refer to section 5 to for more details.

  It is possible to specify a list of address:port combinations delimited by
  commas. The frontend will then listen on all of these addresses. There is no
  fixed limit to the number of addresses and ports which can be listened on in
  a frontend, as well as there is no limit to the number of "bind" statements
  in a frontend.

  Example :
        listen http_proxy
            bind :80,:443
            bind 10.0.0.1:10080,10.0.0.1:10443
            bind /var/run/ssl-frontend.sock user root mode 600 accept-proxy

        listen http_https_proxy
            bind :80
            bind :443 ssl crt /etc/haproxy/site.pem

        listen http_https_proxy_explicit
            bind ipv6@:80
            bind ipv4@public_ssl:443 ssl crt /etc/haproxy/site.pem
            bind unix@ssl-frontend.sock user root mode 600 accept-proxy

        listen external_bind_app1
            bind "fd@${FD_APP1}"

        listen h3_quic_proxy
            bind quic4@10.0.0.1:8888 ssl crt /etc/mycrt

  Note: regarding Linux's abstract namespace sockets, "abns" HAProxy sockets
        uses the whole sun_path length is used for the address length. Some
        other programs such as socat use the string length only by default.
        Pass the option ",unix-tightsocklen=0" to any abstract socket
        definition in socat to make it compatible with HAProxy's, or use the
        "abnsz" HAProxy socket family instead.

  See also : "source", "option forwardfor", "unix-bind" and the PROXY protocol
             documentation, and section 5 about bind options.


capture cookie <name> len <length>
  Capture and log a cookie in the request and in the response.

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                  no   |    yes   |   yes  |   no

  Arguments :
    <name>    is the beginning of the name of the cookie to capture. In order
              to match the exact name, simply suffix the name with an equal
              sign ('='). The full name will appear in the logs, which is
              useful with application servers which adjust both the cookie name
              and value (e.g. ASPSESSIONXXX).

    <length>  is the maximum number of characters to report in the logs, which
              include the cookie name, the equal sign and the value, all in the
              standard "name=value" form. The string will be truncated on the
              right if it exceeds <length>.

  Only the first cookie is captured. Both the "cookie" request headers and the
  "set-cookie" response headers are monitored. This is particularly useful to
  check for application bugs causing session crossing or stealing between
  users, because generally the user's cookies can only change on a login page.

  When the cookie was not presented by the client, the associated log column
  will report "-". When a request does not cause a cookie to be assigned by the
  server, a "-" is reported in the response column.

  The capture is performed in the frontend only because it is necessary that
  the log format does not change for a given frontend depending on the
  backends. This may change in the future. Note that there can be only one
  "capture cookie" statement in a frontend. The maximum capture length is set
  by the global "tune.http.cookielen" setting and defaults to 63 characters. It
  is not possible to specify a capture in a "defaults" section.

  Example:
        capture cookie ASPSESSION len 32

  See also : "capture request header", "capture response header" as well as
            section 8 about logging.


capture request header <name> len <length>
  Capture and log the last occurrence of the specified request header.

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                  no   |    yes   |   yes  |   no

  Arguments :
    <name>    is the name of the header to capture. The header names are not
              case-sensitive, but it is a common practice to write them as they
              appear in the requests, with the first letter of each word in
              upper case. The header name will not appear in the logs, only the
              value is reported, but the position in the logs is respected.

    <length>  is the maximum number of characters to extract from the value and
              report in the logs. The string will be truncated on the right if
              it exceeds <length>.

  The complete value of the last occurrence of the header is captured. The
  value will be added to the logs between braces ('{}'). If multiple headers
  are captured, they will be delimited by a vertical bar ('|') and will appear
  in the same order they were declared in the configuration. Non-existent
  headers will be logged just as an empty string. Common uses for request
  header captures include the "Host" field in virtual hosting environments, the
  "Content-length" when uploads are supported, "User-agent" to quickly
  differentiate between real users and robots, and "X-Forwarded-For" in proxied
  environments to find where the request came from.

  Note that when capturing headers such as "User-agent", some spaces may be
  logged, making the log analysis more difficult. Thus be careful about what
  you log if you know your log parser is not smart enough to rely on the
  braces.

  There is no limit to the number of captured request headers nor to their
  length, though it is wise to keep them low to limit memory usage per stream.
  In order to keep log format consistent for a same frontend, header captures
  can only be declared in a frontend. It is not possible to specify a capture
  in a "defaults" section.

  Example:
        capture request header Host len 15
        capture request header X-Forwarded-For len 15
        capture request header Referer len 15

  See also : "capture cookie", "capture response header" as well as section 8
             about logging.


capture response header <name> len <length>
  Capture and log the last occurrence of the specified response header.

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                  no   |    yes   |   yes  |   no

  Arguments :
    <name>    is the name of the header to capture. The header names are not
              case-sensitive, but it is a common practice to write them as they
              appear in the response, with the first letter of each word in
              upper case. The header name will not appear in the logs, only the
              value is reported, but the position in the logs is respected.

    <length>  is the maximum number of characters to extract from the value and
              report in the logs. The string will be truncated on the right if
              it exceeds <length>.

  The complete value of the last occurrence of the header is captured. The
  result will be added to the logs between braces ('{}') after the captured
  request headers. If multiple headers are captured, they will be delimited by
  a vertical bar ('|') and will appear in the same order they were declared in
  the configuration. Non-existent headers will be logged just as an empty
  string. Common uses for response header captures include the "Content-length"
  header which indicates how many bytes are expected to be returned, the
  "Location" header to track redirections.

  There is no limit to the number of captured response headers nor to their
  length, though it is wise to keep them low to limit memory usage per stream.
  In order to keep log format consistent for a same frontend, header captures
  can only be declared in a frontend. It is not possible to specify a capture
  in a "defaults" section.

  Example:
        capture response header Content-length len 9
        capture response header Location len 15

  See also : "capture cookie", "capture request header" as well as section 8
             about logging.


clitcpka-cnt <count>
  Sets the maximum number of keepalive probes TCP should send before dropping
  the connection on the client side.

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments :
    <count>   is the maximum number of keepalive probes.

  This keyword corresponds to the socket option TCP_KEEPCNT. If this keyword
  is not specified, system-wide TCP parameter (tcp_keepalive_probes) is used.
  The availability of this setting depends on the operating system. It is
  known to work on Linux.

  See also : "option clitcpka", "clitcpka-idle", "clitcpka-intvl".


clitcpka-idle <timeout>
  Sets the time the connection needs to remain idle before TCP starts sending
  keepalive probes, if enabled the sending of TCP keepalive packets on the
  client side.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments :
    <timeout> is the time the connection needs to remain idle before TCP starts
              sending keepalive probes. It is specified in seconds by default,
              but can be in any other unit if the number is suffixed by the
              unit, as explained at the top of this document.

  This keyword corresponds to the socket option TCP_KEEPIDLE. If this keyword
  is not specified, system-wide TCP parameter (tcp_keepalive_time) is used.
  The availability of this setting depends on the operating system. It is
  known to work on Linux.

  See also : "option clitcpka", "clitcpka-cnt", "clitcpka-intvl".


clitcpka-intvl <timeout>
  Sets the time between individual keepalive probes on the client side.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments :
    <timeout> is the time between individual keepalive probes. It is specified
              in seconds by default, but can be in any other unit if the number
              is suffixed by the unit, as explained at the top of this
              document.

  This keyword corresponds to the socket option TCP_KEEPINTVL. If this keyword
  is not specified, system-wide TCP parameter (tcp_keepalive_intvl) is used.
  The availability of this setting depends on the operating system. It is
  known to work on Linux.

  See also : "option clitcpka", "clitcpka-cnt", "clitcpka-idle".


compression algo <algorithm> ...
compression algo-req <algorithm>
compression algo-res <algorithm>
compression type <mime type> ...
  Enable HTTP compression.

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :
    algo     is followed by the list of supported compression algorithms for
             responses (legacy keyword)
    algo-req is followed by compression algorithm for request (only one is
	     provided).
    algo-res is followed by the list of supported compression algorithms for
             responses.
    type     is followed by the list of MIME types that will be compressed for
             responses (legacy keyword).
    type-req is followed by the list of MIME types that will be compressed for
             requests.
    type-res is followed by the list of MIME types that will be compressed for
             responses.

  The currently supported algorithms are :
    identity     this is mostly for debugging, and it was useful for developing
                 the compression feature. Identity does not apply any change on
                 data.

    gzip         applies gzip compression. This setting is only available when
                 support for zlib or libslz was built in.

    deflate      same as "gzip", but with deflate algorithm and zlib format.
                 Note that this algorithm has ambiguous support on many
                 browsers and no support at all from recent ones. It is
                 strongly recommended not to use it for anything else than
                 experimentation. This setting is only available when support
                 for zlib or libslz was built in.

    raw-deflate  same as "deflate" without the zlib wrapper, and used as an
                 alternative when the browser wants "deflate". All major
                 browsers understand it and despite violating the standards,
                 it is known to work better than "deflate", at least on MSIE
                 and some versions of Safari. Do not use it in conjunction
                 with "deflate", use either one or the other since both react
                 to the same Accept-Encoding token. This setting is only
                 available when support for zlib or libslz was built in.

  Compression will be activated depending on the Accept-Encoding request
  header. With identity, it does not take care of that header.
  If backend servers support HTTP compression, these directives
  will be no-op: HAProxy will see the compressed response and will not
  compress again. If backend servers do not support HTTP compression and
  there is Accept-Encoding header in request, HAProxy will compress the
  matching response.

  Compression is disabled when:
    * the request does not advertise a supported compression algorithm in the
      "Accept-Encoding" header
    * the response message is not HTTP/1.1 or above
    * HTTP status code is not one of 200, 201, 202, or 203
    * response contain neither a "Content-Length" header nor a
      "Transfer-Encoding" whose last value is "chunked"
    * response contains a "Content-Type" header whose first value starts with
      "multipart"
    * the response contains the "no-transform" value in the "Cache-control"
      header
    * User-Agent matches "Mozilla/4" unless it is MSIE 6 with XP SP2, or MSIE 7
      and later
    * The response contains a "Content-Encoding" header, indicating that the
      response is already compressed (see compression offload)
    * The response contains an invalid "ETag" header or multiple ETag headers
    * The payload size is smaller than the minimum size
      (see compression minsize-res)

  Note: The compression does not emit the Warning header.

  Examples :
        compression algo gzip
        compression type text/html text/plain

  See also : "compression offload", "compression direction",
             "compression minsize-req" and "compression minsize-res"

compression minsize-req <size>
compression minsize-res <size>
  Sets the minimum payload size in bytes for compression to be applied.

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Payloads smaller than this size will not be compressed, avoiding unnecessary
  CPU overhead for data that would not significantly benefit from compression.
  "minsize-req" applies on requests and "minsize-res" on responses.
  The default value is 0.

compression offload
  Makes HAProxy work as a compression offloader only.

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 no    |    yes   |   yes  |   yes

  The "offload" setting makes HAProxy remove the Accept-Encoding header to
  prevent backend servers from compressing responses. It is strongly
  recommended not to do this because this means that all the compression work
  will be done on the single point where HAProxy is located. However in some
  deployment scenarios, HAProxy may be installed in front of a buggy gateway
  with broken HTTP compression implementation which can't be turned off.
  In that case HAProxy can be used to prevent that gateway from emitting
  invalid payloads. In this case, simply removing the header in the
  configuration does not work because it applies before the header is parsed,
  so that prevents HAProxy from compressing. The "offload" setting should
  then be used for such scenarios.

  If this setting is used in a defaults section, a warning is emitted and the
  option is ignored.

  See also : "compression type", "compression algo", "compression direction"

compression direction <direction>
  Makes haproxy able to compress both requests and responses.
  Valid values are "request", to compress only requests, "response", to
  compress only responses, or "both", when you want to compress both.
  The default value is "response".

  May be used in the following contexts: http

  See also : "compression type", "compression algo", "compression offload"

cookie <name> [ rewrite | insert | prefix ] [ indirect ] [ nocache ]
              [ postonly ] [ preserve ] [ httponly ] [ secure ]
              [ domain <domain> ]* [ maxidle <idle> ] [ maxlife <life> ]
              [ dynamic ] [ attr <value> ]*
  Enable cookie-based persistence in a backend.

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <name>    is the name of the cookie which will be monitored, modified or
              inserted in order to bring persistence. This cookie is sent to
              the client via a "Set-Cookie" header in the response, and is
              brought back by the client in a "Cookie" header in all requests.
              Special care should be taken to choose a name which does not
              conflict with any likely application cookie. Also, if the same
              backends are subject to be used by the same clients (e.g.
              HTTP/HTTPS), care should be taken to use different cookie names
              between all backends if persistence between them is not desired.

    rewrite   This keyword indicates that the cookie will be provided by the
              server and that HAProxy will have to modify its value to set the
              server's identifier in it. This mode is handy when the management
              of complex combinations of "Set-cookie" and "Cache-control"
              headers is left to the application. The application can then
              decide whether or not it is appropriate to emit a persistence
              cookie. Since all responses should be monitored, this mode
              doesn't work in HTTP tunnel mode. Unless the application
              behavior is very complex and/or broken, it is advised not to
              start with this mode for new deployments. This keyword is
              incompatible with "insert" and "prefix".

    insert    This keyword indicates that the persistence cookie will have to
              be inserted by HAProxy in server responses if the client did not

              already have a cookie that would have permitted it to access this
              server. When used without the "preserve" option, if the server
              emits a cookie with the same name, it will be removed before
              processing. For this reason, this mode can be used to upgrade
              existing configurations running in the "rewrite" mode. The cookie
              will only be a session cookie and will not be stored on the
              client's disk. By default, unless the "indirect" option is added,
              the server will see the cookies emitted by the client. Due to
              caching effects, it is generally wise to add the "nocache" or
              "postonly" keywords (see below). The "insert" keyword is not
              compatible with "rewrite" and "prefix".

    prefix    This keyword indicates that instead of relying on a dedicated
              cookie for the persistence, an existing one will be completed.
              This may be needed in some specific environments where the client
              does not support more than one single cookie and the application
              already needs it. In this case, whenever the server sets a cookie
              named <name>, it will be prefixed with the server's identifier
              and a delimiter. The prefix will be removed from all client
              requests so that the server still finds the cookie it emitted.
              Since all requests and responses are subject to being modified,
              this mode doesn't work with tunnel mode. The "prefix" keyword is
              not compatible with "rewrite" and "insert". Note: it is highly
              recommended not to use "indirect" with "prefix", otherwise server
              cookie updates would not be sent to clients.

    indirect  When this option is specified, no cookie will be emitted to a
              client which already has a valid one for the server which has
              processed the request. If the server sets such a cookie itself,
              it will be removed, unless the "preserve" option is also set. In
              "insert" mode, this will additionally remove cookies from the
              requests transmitted to the server, making the persistence
              mechanism totally transparent from an application point of view.
              Note: it is highly recommended not to use "indirect" with
              "prefix", otherwise server cookie updates would not be sent to
              clients.

    nocache   This option is recommended in conjunction with the insert mode
              when there is a cache between the client and HAProxy, as it
              ensures that a cacheable response will be tagged non-cacheable if
              a cookie needs to be inserted. This is important because if all
              persistence cookies are added on a cacheable home page for
              instance, then all customers will then fetch the page from an
              outer cache and will all share the same persistence cookie,
              leading to one server receiving much more traffic than others.
              See also the "insert" and "postonly" options.

    postonly  This option ensures that cookie insertion will only be performed
              on responses to POST requests. It is an alternative to the
              "nocache" option, because POST responses are not cacheable, so
              this ensures that the persistence cookie will never get cached.
              Since most sites do not need any sort of persistence before the
              first POST which generally is a login request, this is a very
              efficient method to optimize caching without risking to find a
              persistence cookie in the cache.
              See also the "insert" and "nocache" options.

    preserve  This option may only be used with "insert" and/or "indirect". It
              allows the server to emit the persistence cookie itself. In this
              case, if a cookie is found in the response, HAProxy will leave it
              untouched. This is useful in order to end persistence after a
              logout request for instance. For this, the server just has to
              emit a cookie with an invalid value (e.g. empty) or with a date in
              the past. By combining this mechanism with the "disable-on-404"
              check option, it is possible to perform a completely graceful
              shutdown because users will definitely leave the server after
              they logout.

    httponly  This option tells HAProxy to add an "HttpOnly" cookie attribute
              when a cookie is inserted. This attribute is used so that a
              user agent doesn't share the cookie with non-HTTP components.
              Please check RFC6265 for more information on this attribute.

    secure    This option tells HAProxy to add a "Secure" cookie attribute when
              a cookie is inserted. This attribute is used so that a user agent
              never emits this cookie over non-secure channels, which means
              that a cookie learned with this flag will be presented only over
              SSL/TLS connections. Please check RFC6265 for more information on
              this attribute.

    domain    This option allows to specify the domain at which a cookie is
              inserted. It requires exactly one parameter: a valid domain
              name. If the domain begins with a dot, the browser is allowed to
              use it for any host ending with that name. It is also possible to
              specify several domain names by invoking this option multiple
              times. Some browsers might have small limits on the number of
              domains, so be careful when doing that. For the record, sending
              10 domains to MSIE 6 or Firefox 2 works as expected.

    maxidle   This option allows inserted cookies to be ignored after some idle
              time. It only works with insert-mode cookies. When a cookie is
              sent to the client, the date this cookie was emitted is sent too.
              Upon further presentations of this cookie, if the date is older
              than the delay indicated by the parameter (in seconds), it will
              be ignored. Otherwise, it will be refreshed if needed when the
              response is sent to the client. This is particularly useful to
              prevent users who never close their browsers from remaining for
              too long on the same server (e.g. after a farm size change). When
              this option is set and a cookie has no date, it is always
              accepted, but gets refreshed in the response. This maintains the
              ability for admins to access their sites. Cookies that have a
              date in the future further than 24 hours are ignored. Doing so
              lets admins fix timezone issues without risking kicking users off
              the site.

    maxlife   This option allows inserted cookies to be ignored after some life
              time, whether they're in use or not. It only works with insert
              mode cookies. When a cookie is first sent to the client, the date
              this cookie was emitted is sent too. Upon further presentations
              of this cookie, if the date is older than the delay indicated by
              the parameter (in seconds), it will be ignored. If the cookie in
              the request has no date, it is accepted and a date will be set.
              Cookies that have a date in the future further than 24 hours are
              ignored. Doing so lets admins fix timezone issues without risking
              kicking users off the site. Contrary to maxidle, this value is
              not refreshed, only the first visit date counts. Both maxidle and
              maxlife may be used at the time. This is particularly useful to
              prevent users who never close their browsers from remaining for
              too long on the same server (e.g. after a farm size change). This
              is stronger than the maxidle method in that it forces a
              redispatch after some absolute delay.

    dynamic   Activate dynamic cookies. When used, a session cookie is
              dynamically created for each server, based on the IP and port
              of the server, and a secret key, specified in the
              "dynamic-cookie-key" backend directive.
              The cookie will be regenerated each time the IP address change,
              and is only generated for IPv4/IPv6.

    attr      This option tells HAProxy to add an extra attribute when a
              cookie is inserted. The attribute value can contain any
              characters except control ones or ";". This option may be
              repeated.

  There can be only one persistence cookie per HTTP backend, and it can be
  declared in a defaults section. The value of the cookie will be the value
  indicated after the "cookie" keyword in a "server" statement. If no cookie
  is declared for a given server, the cookie is not set.

  Examples :
        cookie JSESSIONID prefix
        cookie SRV insert indirect nocache
        cookie SRV insert postonly indirect
        cookie SRV insert indirect nocache maxidle 30m maxlife 8h

  See also : "balance source", "capture cookie", "server" and "ignore-persist".

declare capture [ request | response ] len <length>
  Declares a capture slot.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 no    |    yes   |   yes  |   no

  Arguments:
    <length> is the length allowed for the capture.

  This declaration is only available in the frontend or listen section, but the
  reserved slot can be used in the backends. The "request" keyword allocates a
  capture slot for use in the request, and "response" allocates a capture slot
  for use in the response.

  See also: "capture-req", "capture-res" (sample converters),
            "capture.req.hdr", "capture.res.hdr" (sample fetches),
            "http-request capture" and "http-response capture".


default-server [param*]
  Change default options for a server in a backend

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments:
    <param*>  is a list of parameters for this server. The "default-server"
              keyword accepts an important number of options and has a complete
              section dedicated to it. Please refer to section 5 for more
              details.

  Example :
        default-server inter 1000 weight 13

  See also: "server" and section 5 about server options


default_backend <backend>
  Specify the backend to use when no "use_backend" rule has been matched.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments :
    <backend> is the name of the backend to use.

  When doing content-switching between frontend and backends using the
  "use_backend" keyword, it is often useful to indicate which backend will be
  used when no rule has matched. It generally is the dynamic backend which
  will catch all undetermined requests.

  Example :

        use_backend     dynamic  if  url_dyn
        use_backend     static   if  url_css url_img extension_img
        default_backend dynamic

  See also : "use_backend"


description <string>
  Describe a listen, frontend or backend.

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 no    |    yes   |   yes  |   yes

  Arguments : string

  Allows to add a sentence to describe the related object in the HAProxy HTML
  stats page. The description will be printed on the right of the object name
  it describes.
  No need to backslash spaces in the <string> arguments.


disabled
  Disable a proxy, frontend or backend.

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments : none

  The "disabled" keyword is used to disable an instance, mainly in order to
  liberate a listening port or to temporarily disable a service. The instance
  will still be created and its configuration will be checked, but it will be
  created in the "stopped" state and will appear as such in the statistics. It
  will not receive any traffic nor will it send any health-checks or logs. It
  is possible to disable many instances at once by adding the "disabled"
  keyword in a "defaults" section.

  See also : "enabled"


dispatch <address>:<port>
  Set a default server address

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 no    |    no    |   yes  |   yes

  Arguments :

    <address> is the IPv4 address of the default server. Alternatively, a
              resolvable hostname is supported, but this name will be resolved
              during start-up.

    <ports>   is a mandatory port specification. All connections will be sent
              to this port, and it is not permitted to use port offsets as is
              possible with normal servers.

  The "dispatch" keyword designates a default server for use when no other
  server can take the connection. In the past it was used to forward non
  persistent connections to an auxiliary load balancer. Due to its simple
  syntax, it has also been used for simple TCP relays. It is recommended not to
  use it for more clarity, and to use the "server" directive instead.

  See also : "server"


dynamic-cookie-key <string>
  Set the dynamic cookie secret key for a backend.

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments : The secret key to be used.

  When dynamic cookies are enabled (see the "dynamic" directive for cookie),
  a dynamic cookie is created for each server (unless one is explicitly
  specified on the "server" line), using a hash of the IP address of the
  server, the TCP port, and the secret key.
  That way, we can ensure session persistence across multiple load-balancers,
  even if servers are dynamically added or removed.

enabled
  Enable a proxy, frontend or backend.

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments : none

  The "enabled" keyword is used to explicitly enable an instance, when the
  defaults has been set to "disabled". This is very rarely used.

  See also : "disabled"


errorfile <code> <file>
  Return a file contents instead of errors generated by HAProxy

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :
    <code>    is the HTTP status code. Currently, HAProxy is capable of
              generating codes 200, 400, 401, 403, 404, 405, 407, 408, 410,
              413, 414, 425, 429, 431, 500, 501, 502, 503, and 504.

    <file>    designates a file containing the full HTTP response. It is
              recommended to follow the common practice of appending ".http" to
              the filename so that people do not confuse the response with HTML
              error pages, and to use absolute paths, since files are read
              before any chroot is performed.

  It is important to understand that this keyword is not meant to rewrite
  errors returned by the server, but errors detected and returned by HAProxy.
  This is why the list of supported errors is limited to a small set.

  Code 200 is emitted in response to requests matching a "monitor-uri" rule.

  The files are parsed when HAProxy starts and must be valid according to the
  HTTP specification. They should not exceed the configured buffer size
  (BUFSIZE), which generally is 16 kB, otherwise an internal error will be
  returned. It is also wise not to put any reference to local contents
  (e.g. images) in order to avoid loops between the client and HAProxy when all
  servers are down, causing an error to be returned instead of an
  image. Finally, The response cannot exceed (tune.bufsize - tune.maxrewrite)
  so that "http-after-response" rules still have room to operate (see
  "tune.maxrewrite").

  The files are read at the same time as the configuration and kept in memory.
  For this reason, the errors continue to be returned even when the process is
  chrooted, and no file change is considered while the process is running. A
  simple method for developing those files consists in associating them to the
  403 status code and interrogating a blocked URL.

  See also : "http-error", "errorloc", "errorloc302", "errorloc303"

  Example :
        errorfile 400 /etc/haproxy/errorfiles/400badreq.http
        errorfile 408 /dev/null  # work around Chrome pre-connect bug
        errorfile 403 /etc/haproxy/errorfiles/403forbid.http
        errorfile 503 /etc/haproxy/errorfiles/503sorry.http


errorfiles <name> [<code> ...]
  Import, fully or partially, the error files defined in the <name> http-errors
  section.

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :
    <name>  is the name of an existing http-errors section.

    <code>  is a HTTP status code. Several status code may be listed.
            Currently, HAProxy is capable of generating codes 200, 400, 401,
            403, 404, 405, 407, 408, 410, 413, 414, 425, 429, 431, 500, 501,
            502, 503, and 504.

  Errors defined in the http-errors section with the name <name> are imported
  in the current proxy. If no status code is specified, all error files of the
  http-errors section are imported. Otherwise, only error files associated to
  the listed status code are imported. Those error files override the already
  defined custom errors for the proxy. And they may be overridden by following
  ones. Functionally, it is exactly the same as declaring all error files by
  hand using "errorfile" directives.

  See also : "http-error", "errorfile", "errorloc", "errorloc302" ,
             "errorloc303" and section 12.4 about http-errors.

  Example :
        errorfiles generic
        errorfiles site-1 403 404


errorloc <code> <url>
errorloc302 <code> <url>
  Return an HTTP redirection to a URL instead of errors generated by HAProxy

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :
    <code>    is the HTTP status code. Currently, HAProxy is capable of
              generating codes 200, 400, 401, 403, 404, 405, 407, 408, 410,
              413, 414, 425, 429, 431, 500, 501, 502, 503, and 504.

    <url>     it is the exact contents of the "Location" header. It may contain
              either a relative URI to an error page hosted on the same site,
              or an absolute URI designating an error page on another site.
              Special care should be given to relative URIs to avoid redirect
              loops if the URI itself may generate the same error (e.g. 500).

  It is important to understand that this keyword is not meant to rewrite
  errors returned by the server, but errors detected and returned by HAProxy.
  This is why the list of supported errors is limited to a small set.

  Code 200 is emitted in response to requests matching a "monitor-uri" rule.

  Note that both keyword return the HTTP 302 status code, which tells the
  client to fetch the designated URL using the same HTTP method. This can be
  quite problematic in case of non-GET methods such as POST, because the URL
  sent to the client might not be allowed for something other than GET. To
  work around this problem, please use "errorloc303" which send the HTTP 303
  status code, indicating to the client that the URL must be fetched with a GET
  request.

  See also : "http-error", "errorfile", "errorloc303"


errorloc303 <code> <url>
  Return an HTTP redirection to a URL instead of errors generated by HAProxy

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :
    <code>    is the HTTP status code. Currently, HAProxy is capable of
              generating codes 200, 400, 401, 403, 404, 405, 407, 408, 410,
              413, 414, 425, 429, 431, 500, 501, 502, 503, and 504.

    <url>     it is the exact contents of the "Location" header. It may contain
              either a relative URI to an error page hosted on the same site,
              or an absolute URI designating an error page on another site.
              Special care should be given to relative URIs to avoid redirect
              loops if the URI itself may generate the same error (e.g. 500).

  It is important to understand that this keyword is not meant to rewrite
  errors returned by the server, but errors detected and returned by HAProxy.
  This is why the list of supported errors is limited to a small set.

  Code 200 is emitted in response to requests matching a "monitor-uri" rule.

  Note that both keyword return the HTTP 303 status code, which tells the
  client to fetch the designated URL using the same HTTP GET method. This
  solves the usual problems associated with "errorloc" and the 302 code. It is
  possible that some very old browsers designed before HTTP/1.1 do not support
  it, but no such problem has been reported till now.

  See also : "http-error", "errorfile", "errorloc", "errorloc302"


email-alert from <emailaddr>
  Declare the from email address to be used in both the envelope and header
  of email alerts. This is the address that email alerts are sent from.

  May be used in the following contexts: tcp, http, log

  May be used in sections:    defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :

    <emailaddr> is the from email address to use when sending email alerts

  Also requires "email-alert mailers" and "email-alert to" to be set
  and if so sending email alerts is enabled for the proxy.

  See also : "email-alert level", "email-alert mailers",
             "email-alert myhostname", "email-alert to", section 12.3 about
             mailers.


email-alert level <level>
  Declare the maximum log level of messages for which email alerts will be
  sent. This acts as a filter on the sending of email alerts.

  May be used in the following contexts: tcp, http, log

  May be used in sections:    defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :

    <level> One of the 8 syslog levels:
              emerg alert crit err warning notice info  debug
            The above syslog levels are ordered from lowest to highest.

  By default level is alert

  Also requires "email-alert from", "email-alert mailers" and
  "email-alert to" to be set and if so sending email alerts is enabled
  for the proxy.

  Alerts are sent when :

  * An un-paused server is marked as down and <level> is alert or lower
  * A paused server is marked as down and <level> is notice or lower
  * A server is marked as up or enters the drain state and <level>
    is notice or lower
  * "option log-health-checks" is enabled, <level> is info or lower,
     and a health check status update occurs

  See also : "email-alert from", "email-alert mailers",
             "email-alert myhostname", "email-alert to",
             section 12.3 about mailers.


email-alert mailers <mailersect>
  Declare the mailers to be used when sending email alerts

  May be used in the following contexts: tcp, http, log

  May be used in sections:    defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :

    <mailersect> is the name of the mailers section to send email alerts.

  Also requires "email-alert from" and "email-alert to" to be set
  and if so sending email alerts is enabled for the proxy.

  See also : "email-alert from", "email-alert level", "email-alert myhostname",
             "email-alert to", section 12.3 about mailers.


email-alert myhostname <hostname>
  Declare the to hostname address to be used when communicating with
  mailers.

  May be used in the following contexts: tcp, http, log

  May be used in sections:    defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :

    <hostname> is the hostname to use when communicating with mailers

  By default the systems hostname is used.

  Also requires "email-alert from", "email-alert mailers" and
  "email-alert to" to be set and if so sending email alerts is enabled
  for the proxy.

  See also : "email-alert from", "email-alert level", "email-alert mailers",
             "email-alert to", section 12.3 about mailers.


email-alert to <emailaddr>
  Declare both the recipient address in the envelope and to address in the
  header of email alerts. This is the address that email alerts are sent to.

  May be used in the following contexts: tcp, http, log

  May be used in sections:    defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :

    <emailaddr> is the to email address to use when sending email alerts

  Also requires "email-alert mailers" and "email-alert to" to be set
  and if so sending email alerts is enabled for the proxy.

  See also : "email-alert from", "email-alert level", "email-alert mailers",
             "email-alert myhostname", section 12.3 about mailers.


error-log-format <fmt>
  Specifies the log format string to use in case of connection error on the frontend side.

  May be used in the following contexts: tcp, http

  May be used in sections:    defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |    no

  This directive specifies the log format string that will be used for logs
  containing information related to errors, timeouts, retries redispatches or
  HTTP status code 5xx. This format will in short be used for every log line
  that would be concerned by the "log-separate-errors" option, including
  connection errors described in section 8.2.5.

  If the directive is used in a defaults section, all subsequent frontends will
  use the same log format. Please see section 8.2.6 which covers the custom log
  format string in depth.

  "error-log-format" directive overrides previous "error-log-format"
  directives.


force-persist { if | unless } <condition>
  Declare a condition to force persistence on down servers

  May be used in the following contexts: tcp, http

  May be used in sections:    defaults | frontend | listen | backend
                                  no   |    no    |   yes  |   yes

  By default, requests are not dispatched to down servers. It is possible to
  force this using "option persist", but it is unconditional and redispatches
  to a valid server if "option redispatch" is set. That leaves with very little
  possibilities to force some requests to reach a server which is artificially
  marked down for maintenance operations.

  The "force-persist" statement allows one to declare various ACL-based
  conditions which, when met, will cause a request to ignore the down status of
  a server and still try to connect to it. That makes it possible to start a
  server, still replying an error to the health checks, and run a specially
  configured browser to test the service. Among the handy methods, one could
  use a specific source IP address, or a specific cookie. The cookie also has
  the advantage that it can easily be added/removed on the browser from a test
  page. Once the service is validated, it is then possible to open the service
  to the world by returning a valid response to health checks.

  The forced persistence is enabled when an "if" condition is met, or unless an
  "unless" condition is met. The final redispatch is always disabled when this
  is used.

  See also : "option redispatch", "ignore-persist", "persist",
             and section 7 about ACL usage.


filter <name> [param*]
  Add the filter <name> in the filter list attached to the proxy.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 no    |   yes    |   yes  |   yes

  Arguments :
    <name>     is the name of the filter. Officially supported filters are
               referenced in section 9.

    <param*>   is a list of parameters accepted by the filter <name>. The
               parsing of these parameters are the responsibility of the
               filter. Please refer to the documentation of the corresponding
               filter (section 9) for all details on the supported parameters.

  Multiple occurrences of the filter line can be used for the same proxy. The
  same filter can be referenced many times if needed.

  Example:
      listen
        bind *:80

        filter trace name BEFORE-HTTP-COMP
        filter compression
        filter trace name AFTER-HTTP-COMP

        compression algo gzip
        compression offload

        server srv1 192.168.0.1:80

  See also : section 9.


fullconn <conns>
  Specify at what backend load the servers will reach their maxconn

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <conns>   is the number of connections on the backend which will make the
              servers use the maximal number of connections.

  When a server has a "maxconn" parameter specified, it means that its number
  of concurrent connections will never go higher. Additionally, if it has a
  "minconn" parameter, it indicates a dynamic limit following the backend's
  load. The server will then always accept at least <minconn> connections,
  never more than <maxconn>, and the limit will be on the ramp between both
  values when the backend has less than <conns> concurrent connections. This
  makes it possible to limit the load on the servers during normal loads, but
  push it further for important loads without overloading the servers during
  exceptional loads.

  Since it's hard to get this value right, HAProxy automatically sets it to
  10% of the sum of the maxconns of all frontends that may branch to this
  backend (based on "use_backend" and "default_backend" rules). That way it's
  safe to leave it unset. However, "use_backend" involving dynamic names are
  not counted since there is no way to know if they could match or not.

  Example :
     # The servers will accept between 100 and 1000 concurrent connections each
     # and the maximum of 1000 will be reached when the backend reaches 10000
     # connections.
     backend dynamic
        fullconn   10000
        server     srv1   dyn1:80 minconn 100 maxconn 1000
        server     srv2   dyn2:80 minconn 100 maxconn 1000

  See also : "maxconn", "server"


guid <string>
  Specify a case-sensitive global unique ID for this proxy.

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 no    |    yes   |   yes  |   yes

  <string> must be unique across all haproxy configuration on every object
  types. Format is left unspecified to allow the user to select its naming
  policy. The only restriction is its length which cannot be greater than
  127 characters. All alphanumerical values and '.', ':', '-' and '_'
  characters are valid.


hash-balance-factor <factor>
  Specify the balancing factor for bounded-load consistent hashing

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   no   |   yes

  Arguments :
    <factor> is the control for the maximum number of concurrent requests to
             send to a server, expressed as a percentage of the average number
             of concurrent requests across all of the active servers.

  Specifying a "hash-balance-factor" for a server with "hash-type consistent"
  enables an algorithm that prevents any one server from getting too many
  requests at once, even if some hash buckets receive many more requests than
  others. Setting <factor> to 0 (the default) disables the feature. Otherwise,
  <factor> is a percentage greater than 100. For example, if <factor> is 150,
  then no server will be allowed to have a load more than 1.5 times the average.
  If server weights are used, they will be respected.

  If the first-choice server is disqualified, the algorithm will choose another
  server based on the request hash, until a server with additional capacity is
  found. A higher <factor> allows more imbalance between the servers, while a
  lower <factor> means that more servers will be checked on average, affecting
  performance. Reasonable values are from 125 to 200.

  This setting is also used by "balance random" which internally relies on the
  consistent hashing mechanism.

  See also : "balance" and "hash-type".

hash-preserve-affinity { always | maxconn | maxqueue }
  Specify a method for assigning streams to servers with hash load balancing
  when servers are satured or have a full queue.

  May be used in the following contexts: http

  May be used in sections:   defaults | frontend | listen | backend
                               yes    |    no    |   yes  |   yes

  The following values can be specified:

    - "always"   : this is the default strategy. A stream is assigned to a
                   server based on hashing irrespective of whether the server
                   is currently saturated.

    - "maxconn"  : when selected, servers that have "maxconn" set and are
                   currently saturated will be skipped. Another server will be
                   picked by following the hashing ring. This has no effect on
                   servers that do not set "maxconn". If all servers are
                   saturated, the request is enqueued to the last server in the
                   hash ring before the initially selected server.

    - "maxqueue" : when selected, servers that have "maxconn" set, "maxqueue"
                   set to a non-zero value (limited queue size) and currently
                   have a full queue will be skipped. Another server will be
                   picked by following the hashing ring. This has no effect on
                   servers that do not set both "maxconn" and "maxqueue".

  See also : "maxconn", "maxqueue", "hash-balance-factor"

hash-type <method> <function> <modifier>
  Specify a method to use for mapping hashes to servers

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <method> is the method used to select a server from the hash computed by
             the <function> :

      map-based   the hash table is a static array containing all alive servers.
                  The hashes will be very smooth, will consider weights, but
                  will be static in that weight changes while a server is up
                  will be ignored. This means that there will be no slow start.
                  Also, since a server is selected by its position in the array,
                  most mappings are changed when the server count changes. This
                  means that when a server goes up or down, or when a server is
                  added to a farm, most connections will be redistributed to
                  different servers. This can be inconvenient with caches for
                  instance.

      consistent  the hash table is a tree filled with many occurrences of each
                  server. The hash key is looked up in the tree and the closest
                  server is chosen. This hash is dynamic, it supports changing
                  weights while the servers are up, so it is compatible with the
                  slow start feature. It has the advantage that when a server
                  goes up or down, only its associations are moved. When a
                  server is added to the farm, only a few part of the mappings
                  are redistributed, making it an ideal method for caches.
                  However, due to its principle, the distribution will never be
                  very smooth and it may sometimes be necessary to adjust a
                  server's weight or its ID to get a more balanced distribution.
                  In order to get the same distribution on multiple load
                  balancers, it is important that all servers have the exact
                  same IDs. Note: consistent hash uses sdbm and avalanche if no
                  hash function is specified.

    <function> is the hash function to be used :

       sdbm   this function was created initially for sdbm (a public-domain
              reimplementation of ndbm) database library. It was found to do
              well in scrambling bits, causing better distribution of the keys
              and fewer splits. It also happens to be a good general hashing
              function with good distribution, unless the total server weight
              is a multiple of 64, in which case applying the avalanche
              modifier may help.

       djb2   this function was first proposed by Dan Bernstein many years ago
              on comp.lang.c. Studies have shown that for certain workload this
              function provides a better distribution than sdbm. It generally
              works well with text-based inputs though it can perform extremely
              poorly with numeric-only input or when the total server weight is
              a multiple of 33, unless the avalanche modifier is also used.

       wt6    this function was designed for HAProxy while testing other
              functions in the past. It is not as smooth as the other ones, but
              is much less sensible to the input data set or to the number of
              servers. It can make sense as an alternative to sdbm+avalanche or
              djb2+avalanche for consistent hashing or when hashing on numeric
              data such as a source IP address or a visitor identifier in a URL
              parameter.

       crc32  this is the most common CRC32 implementation as used in Ethernet,
              gzip, PNG, etc. It is slower than the other ones but may provide
              a better distribution or less predictable results especially when
              used on strings.

       none   don't hash the key, the key will be used as a hash, this can be
              useful to manually hash the key using a converter for that purpose
              and let haproxy use the result directly.

    <modifier> indicates an optional method applied after hashing the key :

       avalanche   This directive indicates that the result from the hash
                   function above should not be used in its raw form but that
                   a 4-byte full avalanche hash must be applied first. The
                   purpose of this step is to mix the resulting bits from the
                   previous hash in order to avoid any undesired effect when
                   the input contains some limited values or when the number of
                   servers is a multiple of one of the hash's components (64
                   for SDBM, 33 for DJB2). Enabling avalanche tends to make the
                   result less predictable, but it's also not as smooth as when
                   using the original function. Some testing might be needed
                   with some workloads. This hash is one of the many proposed
                   by Bob Jenkins.

  The default hash type is "map-based" and is recommended for most usages. The
  default function is "sdbm", the selection of a function should be based on
  the range of the values being hashed.

  See also : "balance", "hash-balance-factor", "hash-preserve-affinity",
             "server"

http-after-response <action> <options...> [ { if | unless } <condition> ]
  Access control for all Layer 7 responses (server, applet/service and internal
  ones).

  May be used in the following contexts: http

  May be used in sections:   defaults | frontend | listen | backend
                               yes(!) |    yes   |   yes  |   yes

  The http-after-response statement defines a set of rules which apply to layer
  7 processing. The rules are evaluated in their declaration order when they
  are met in a frontend, listen or backend section. Since these rules apply on
  responses, the backend rules are applied first, followed by the frontend's
  rules. Any rule may optionally be followed by an ACL-based condition, in
  which case it will only be evaluated if the condition evaluates true.

  Unlike http-response rules, these ones are applied on all responses, the
  server ones but also to all responses generated by HAProxy. These rules are
  evaluated at the end of the responses analysis, before the data forwarding
  phase.

  The condition is evaluated just before the action is executed, and the action
  is performed exactly once. As such, there is no problem if an action changes
  an element which is checked as part of the condition. This also means that
  multiple actions may rely on the same condition so that the first action that
  changes the condition's evaluation is sufficient to implicitly disable the
  remaining actions. This is used for example when trying to assign a value to
  a variable from various sources when it's empty. There is no limit to the
  number of "http-after-response" statements per instance.

  The first keyword after "http-after-response" in the syntax is the rule's
  action, optionally followed by a varying number of arguments for the action.
  The supported actions and their respective syntaxes are enumerated in section
  4.3 "Actions" (look for actions which tick "HTTP Aft").

  This directive is only available from named defaults sections, not anonymous
  ones. Rules defined in the defaults section are evaluated before ones in the
  associated proxy section. To avoid ambiguities, in this case the same
  defaults section cannot be used by proxies with the frontend capability and
  by proxies with the backend capability. It means a listen section cannot use
  a defaults section defining such rules.

  Note: Errors emitted in early stage of the request parsing are handled by the
        multiplexer at a lower level, before any http analysis. Thus no
        http-after-response ruleset is evaluated on these errors.

  Example:
    http-after-response set-header Strict-Transport-Security "max-age=31536000"
    http-after-response set-header Cache-Control "no-store,no-cache,private"
    http-after-response set-header Pragma "no-cache"


http-check comment <string>
  Defines a comment for the following the http-check rule, reported in logs if
  it fails.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <string>  is the comment message to add in logs if the following http-check
              rule fails.

  It only works for connect, send and expect rules. It is useful to make
  user-friendly error reporting.

  See also : "option httpchk", "http-check connect", "http-check send" and
             "http-check expect".


http-check connect [default] [port <expr>] [addr <ip>] [send-proxy]
                   [via-socks4] [ssl] [sni <sni>] [alpn <alpn>] [linger]
                   [proto <name>] [comment <msg>]
  Opens a new connection to perform an HTTP health check

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    comment <msg>  defines a message to report if the rule evaluation fails.

    default      Use default options of the server line to do the health
                 checks. The server options are used only if not redefined.

    port <expr>  if not set, check port or server port is used.
                 It tells HAProxy where to open the connection to.
                 <port> must be a valid TCP port source integer, from 1 to
                 65535 or an sample-fetch expression.

    addr <ip>    defines the IP address to do the health check.

    send-proxy   send a PROXY protocol string

    via-socks4   enables outgoing health checks using upstream socks4 proxy.

    ssl          opens a ciphered connection

    sni <sni>    specifies the SNI to use to do health checks over SSL.

    alpn <alpn>  defines which protocols to advertise with ALPN. The protocol
                 list consists in a comma-delimited list of protocol names,
                 for instance: "h2,http/1.1". If it is not set, the server ALPN
                 is used.

    proto <name> forces the multiplexer's protocol to use for this connection.
                 It must be an HTTP mux protocol and it must be usable on the
                 backend side. The list of available protocols is reported in
                 haproxy -vv.

    linger       cleanly close the connection instead of using a single RST.

  Just like tcp-check health checks, it is possible to configure the connection
  to use to perform HTTP health check. This directive should also be used to
  describe a scenario involving several request/response exchanges, possibly on
  different ports or with different servers.

  When there are no TCP port configured on the server line neither server port
  directive, then the first step of the http-check sequence must be to specify
  the port with a "http-check connect".

  In an http-check ruleset a 'connect' is required, it is also mandatory to start
  the ruleset with a 'connect' rule. Purpose is to ensure admin know what they
  do.

  When a connect must start the ruleset, if may still be preceded by set-var,
  unset-var or comment rules.

  Examples :
         # check HTTP and HTTPs services on a server.
         # first open port 80 thanks to server line port directive, then
         # tcp-check opens port 443, ciphered and run a request on it:
         option httpchk

         http-check connect
         http-check send meth GET uri / ver HTTP/1.1 hdr host haproxy.1wt.eu
         http-check expect status 200-399
         http-check connect port 443 ssl sni haproxy.1wt.eu
         http-check send meth GET uri / ver HTTP/1.1 hdr host haproxy.1wt.eu
         http-check expect status 200-399

         server www 10.0.0.1 check port 80

  See also : "option httpchk", "http-check send", "http-check expect"


http-check disable-on-404
  Enable a maintenance mode upon HTTP/404 response to health-checks

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments : none

  When this option is set, a server which returns an HTTP code 404 will be
  excluded from further load-balancing, but will still receive persistent
  connections. This provides a very convenient method for Web administrators
  to perform a graceful shutdown of their servers. It is also important to note
  that a server which is detected as failed while it was in this mode will not
  generate an alert, just a notice. If the server responds 2xx or 3xx again, it
  will immediately be reinserted into the farm. The status on the stats page
  reports "NOLB" for a server in this mode. It is important to note that this
  option only works in conjunction with the "httpchk" option. If this option
  is used with "http-check expect", then it has precedence over it so that 404
  responses will still be considered as soft-stop. Note also that a stopped
  server will stay stopped even if it replies 404s. This option is only
  evaluated for running servers.

  See also : "option httpchk" and "http-check expect".


http-check expect [min-recv <int>] [comment <msg>]
                  [ok-status <st>] [error-status <st>] [tout-status <st>]
                  [on-success <fmt>] [on-error <fmt>] [status-code <expr>]
                  [!] <match> <pattern>
  Make HTTP health checks consider response contents or specific status codes

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    comment <msg>  defines a message to report if the rule evaluation fails.

    min-recv  is optional and can define the minimum amount of data required to
              evaluate the current expect rule. If the number of received bytes
              is under this limit, the check will wait for more data. This
              option can be used to resolve some ambiguous matching rules or to
              avoid executing costly regex matches on content known to be still
              incomplete. If an exact string is used, the minimum between the
              string length and this parameter is used. This parameter is
              ignored if it is set to -1. If the expect rule does not match,
              the check will wait for more data. If set to 0, the evaluation
              result is always conclusive.

    ok-status <st>     is optional and can be used to set the check status if
                       the expect rule is successfully evaluated and if it is
                       the last rule in the tcp-check ruleset. "L7OK", "L7OKC",
                       "L6OK" and "L4OK" are supported :
                         - L7OK  : check passed on layer 7
                         - L7OKC : check conditionally passed on layer 7, set
                                   server to NOLB state.
                         - L6OK  : check passed on layer 6
                         - L4OK  : check passed on layer 4
                       By default "L7OK" is used.

    error-status <st>  is optional and can be used to set the check status if
                       an error occurred during the expect rule evaluation.
                       "L7OKC", "L7RSP", "L7STS", "L6RSP" and "L4CON" are
                       supported :
                         - L7OKC : check conditionally passed on layer 7, set
                                   server to NOLB state.
                         - L7RSP : layer 7 invalid response - protocol error
                         - L7STS : layer 7 response error, for example HTTP 5xx
                         - L6RSP : layer 6 invalid response - protocol error
                         - L4CON : layer 1-4 connection problem
                       By default "L7RSP" is used.

    tout-status <st>   is optional and can be used to set the check status if
                       a timeout occurred during the expect rule evaluation.
                       "L7TOUT", "L6TOUT", and "L4TOUT" are supported :
                         - L7TOUT : layer 7 (HTTP/SMTP) timeout
                         - L6TOUT : layer 6 (SSL) timeout
                         - L4TOUT : layer 1-4 timeout
                       By default "L7TOUT" is used.

    on-success <fmt>   is optional and can be used to customize the
                       informational message reported in logs if the expect
                       rule is successfully evaluated and if it is the last rule
                       in the tcp-check ruleset. <fmt> is a Custom log format
                       string (see section 8.2.6).

    on-error <fmt>     is optional and can be used to customize the
                       informational message reported in logs if an error
                       occurred during the expect rule evaluation. <fmt> is a
                       Custom log format string (see section 8.2.6).

    <match>   is a keyword indicating how to look for a specific pattern in the
              response. The keyword may be one of "status", "rstatus", "hdr",
              "fhdr", "string", or "rstring". The keyword may be preceded by an
              exclamation mark ("!") to negate the match. Spaces are allowed
              between the exclamation mark and the keyword. See below for more
              details on the supported keywords.

    <pattern> is the pattern to look for. It may be a string, a regular
              expression or a more complex pattern with several arguments. If
              the string pattern contains spaces, they must be escaped with the
              usual backslash ('\').

  By default, "option httpchk" considers that response statuses 2xx and 3xx
  are valid, and that others are invalid. When "http-check expect" is used,
  it defines what is considered valid or invalid. Only one "http-check"
  statement is supported in a backend. If a server fails to respond or times
  out, the check obviously fails. The available matches are :

    status <codes> :  test the status codes found parsing <codes> string. it
                      must be a comma-separated list of status codes or range
                      codes. A health check response will be considered as
                      valid if the response's status code matches any status
                      code or is inside any range of the list. If the "status"
                      keyword is prefixed with "!", then the response will be
                      considered invalid if the status code matches.

    rstatus <regex> : test a regular expression for the HTTP status code.
                      A health check response will be considered valid if the
                      response's status code matches the expression. If the
                      "rstatus" keyword is prefixed with "!", then the response
                      will be considered invalid if the status code matches.
                      This is mostly used to check for multiple codes.

    hdr  { name | name-lf } [ -m <meth> ] <name>
         [ { value | value-lf } [ -m <meth> ] <value> :
                      test the specified header pattern on the HTTP response
                      headers. The name pattern is mandatory but the value
                      pattern is optional. If not specified, only the header
                      presence is verified. <meth> is the matching method,
                      applied on the header name or the header value. Supported
                      matching methods are "str" (exact match), "beg" (prefix
                      match), "end" (suffix match), "sub" (substring match) or
                      "reg" (regex match). If not specified, exact matching
                      method is used. If the "name-lf" parameter is used,
                      <name> is evaluated as a Custom log format string (see
                      section 8.2.6). If "value-lf" parameter is used, <value>
                      is evaluated as a log-format string. These parameters
                      cannot be used with the regex matching method. Finally,
                      the header value is considered as comma-separated
                      list. Note that matchings are case insensitive on the
                      header names.

    fhdr { name | name-lf } [ -m <meth> ] <name>
         [ { value | value-lf } [ -m <meth> ] <value> :
                      test the specified full header pattern on the HTTP
                      response headers. It does exactly the same as the "hdr"
                      keyword, except the full header value is tested, commas
                      are not considered as delimiters.

    string <string> : test the exact string match in the HTTP response body.
                      A health check response will be considered valid if the
                      response's body contains this exact string. If the
                      "string" keyword is prefixed with "!", then the response
                      will be considered invalid if the body contains this
                      string. This can be used to look for a mandatory word at
                      the end of a dynamic page, or to detect a failure when a
                      specific error appears on the check page (e.g. a stack
                      trace).

    rstring <regex> : test a regular expression on the HTTP response body.
                      A health check response will be considered valid if the
                      response's body matches this expression. If the "rstring"
                      keyword is prefixed with "!", then the response will be
                      considered invalid if the body matches the expression.
                      This can be used to look for a mandatory word at the end
                      of a dynamic page, or to detect a failure when a specific
                      error appears on the check page (e.g. a stack trace).

    string-lf <fmt> : test a Custom log format string (see section 8.2.6) match
                      in the HTTP response body. A health check response will
                      be considered valid if the response's body contains the
                      string resulting of the evaluation of <fmt>, which
                      follows the log-format rules. If prefixed with "!", then
                      the response will be considered invalid if the body
                      contains the string.

  It is important to note that the responses will be limited to a certain size
  defined by the global "tune.bufsize" option, which defaults to 16384 bytes.
  Thus, too large responses may not contain the mandatory pattern when using
  "string" or "rstring". If a large response is absolutely required, it is
  possible to change the default max size by setting the global variable.
  However, it is worth keeping in mind that parsing very large responses can
  waste some CPU cycles, especially when regular expressions are used, and that
  it is always better to focus the checks on smaller resources.

  In an http-check ruleset, the last expect rule may be implicit. If no expect
  rule is specified after the last "http-check send", an implicit expect rule
  is defined to match on 2xx or 3xx status codes. It means this rule is also
  defined if there is no "http-check" rule at all, when only "option httpchk"
  is set.

  Last, if "http-check expect" is combined with "http-check disable-on-404",
  then this last one has precedence when the server responds with 404.

  Examples :
         # only accept status 200 as valid
         http-check expect status 200,201,300-310

         # be sure a sessid coookie is set
         http-check expect header name "set-cookie" value -m beg "sessid="

         # consider SQL errors as errors
         http-check expect ! string SQL\ Error

         # consider status 5xx only as errors
         http-check expect ! rstatus ^5

         # check that we have a correct hexadecimal tag before /html
         http-check expect rstring <!--tag:[0-9a-f]*--></html>

  See also : "option httpchk", "http-check connect", "http-check disable-on-404"
             and "http-check send".


http-check send [meth <method>] [{ uri <uri> | uri-lf <fmt> }>] [ver <version>]
                [hdr <name> <fmt>]* [{ body <string> | body-lf <fmt> }]
                [comment <msg>]
  Add a possible list of headers and/or a body to the request sent during HTTP
  health checks.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    comment <msg>  defines a message to report if the rule evaluation fails.

    meth <method>  is the optional HTTP method used with the requests. When not
                   set, the "OPTIONS" method is used, as it generally requires
                   low server processing and is easy to filter out from the
                   logs. Any method may be used, though it is not recommended
                   to invent non-standard ones.

    uri <uri>      is optional and set the URI referenced in the HTTP requests
                   to the string <uri>. It defaults to "/" which is accessible
                   by default on almost any server, but may be changed to any
                   other URI. Query strings are permitted.

    uri-lf <fmt>   is optional and set the URI referenced in the HTTP requests
                   using the Custom log format <fmt> (see section 8.2.6). It
                   defaults to "/" which is accessible by default on almost any
                   server, but may be changed to any other URI. Query strings
                   are permitted.

    ver <version>  is the optional HTTP version string. It defaults to
                   "HTTP/1.0" but some servers might behave incorrectly in HTTP
                   1.0, so turning it to HTTP/1.1 may sometimes help. Note that
                   the Host field is mandatory in HTTP/1.1, use "hdr" argument
                   to add it.

    hdr <name> <fmt>  adds the HTTP header field whose name is specified in
                      <name> and whose value is defined by <fmt>, which follows
                      the Custom log format rules described in section 8.2.6.

    body <string>  add the body defined by <string> to the request sent during
                   HTTP health checks. If defined, the "Content-Length" header
                   is thus automatically added to the request.

    body-lf <fmt>  add the body defined by the Custom log format <fmt> (see
                   section 8.2.6) to the request sent during HTTP health
                   checks. If defined, the "Content-Length" header is thus
                   automatically added to the request.

  In addition to the request line defined by the "option httpchk" directive,
  this one is the valid way to add some headers and optionally a body to the
  request sent during HTTP health checks. If a body is defined, the associate
  "Content-Length" header is automatically added. Thus, this header or
  "Transfer-encoding" header should not be present in the request provided by
  "http-check send". If so, it will be ignored. The old trick consisting to add
  headers after the version string on the "option httpchk" line is now
  deprecated.

  Also "http-check send" doesn't support HTTP keep-alive. Keep in mind that it
  will automatically append a "Connection: close" header, unless a Connection
  header has already already been configured via a hdr entry.

  Note that the Host header and the request authority, when both defined, are
  automatically synchronized. It means when the HTTP request is sent, when a
  Host is inserted in the request, the request authority is accordingly
  updated. Thus, don't be surprised if the Host header value overwrites the
  configured request authority.

  Note also for now, no Host header is automatically added in HTTP/1.1 or above
  requests. You should add it explicitly.

  See also : "option httpchk", "http-check send-state" and "http-check expect".


http-check send-state
  Enable emission of a state header with HTTP health checks

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments : none

  When this option is set, HAProxy will systematically send a special header
  "X-Haproxy-Server-State" with a list of parameters indicating to each server
  how they are seen by HAProxy. This can be used for instance when a server is
  manipulated without access to HAProxy and the operator needs to know whether
  HAProxy still sees it up or not, or if the server is the last one in a farm.

  The header is composed of fields delimited by semi-colons, the first of which
  is a word ("UP", "DOWN", "NOLB"), possibly followed by a number of valid
  checks on the total number before transition, just as appears in the stats
  interface. Next headers are in the form "<variable>=<value>", indicating in
  no specific order some values available in the stats interface :
    - a variable "address", containing the address of the backend server.
      This corresponds to the <address> field in the server declaration. For
      unix domain sockets, it will read "unix".

    - a variable "port", containing the port of the backend server. This
      corresponds to the <port> field in the server declaration. For unix
      domain sockets, it will read "unix".

    - a variable "name", containing the name of the backend followed by a slash
      ("/") then the name of the server. This can be used when a server is
      checked in multiple backends.

    - a variable "node" containing the name of the HAProxy node, as set in the
      global "node" variable, otherwise the system's hostname if unspecified.

    - a variable "weight" indicating the weight of the server, a slash ("/")
      and the total weight of the farm (just counting usable servers). This
      helps to know if other servers are available to handle the load when this
      one fails.

    - a variable "scur" indicating the current number of concurrent connections
      on the server, followed by a slash ("/") then the total number of
      connections on all servers of the same backend.

    - a variable "qcur" indicating the current number of requests in the
      server's queue.

  Example of a header received by the application server :
    >>>  X-Haproxy-Server-State: UP 2/3; name=bck/srv2; node=lb1; weight=1/2; \
           scur=13/22; qcur=0

  See also : "option httpchk", "http-check disable-on-404" and
             "http-check send".


http-check set-var(<var-name>[,<cond>...]) <expr>
http-check set-var-fmt(<var-name>[,<cond>...]) <fmt>
  This operation sets the content of a variable. The variable is declared inline.

  May be used in the following contexts: tcp, http

  May be used in sections:   defaults | frontend | listen | backend
                               yes    |    no    |   yes  |   yes

  Arguments :
   <var-name>   The name of the variable. Only "proc", "sess" and "check"
                scopes can be used. See section 2.8 about variables for details.

    <cond>      A set of conditions that must all be true for the variable to
                actually be set (such as "ifnotempty", "ifgt" ...). See the
                set-var converter's description for a full list of possible
                conditions.

    <expr>      Is a sample-fetch expression potentially followed by converters.

    <fmt>       This is the value expressed using Custom log format (see Custom
                Log Format in section 8.2.6).

  Examples :
        http-check set-var(check.port) int(1234)
        http-check set-var-fmt(check.port) "name=%H"


http-check unset-var(<var-name>)
  Free a reference to a variable within its scope.

  May be used in the following contexts: tcp, http

  May be used in sections:   defaults | frontend | listen | backend
                               yes    |    no    |   yes  |   yes

  Arguments :
   <var-name>   The name of the variable. Only "proc", "sess" and "check"
                scopes can be used. See section 2.8 about variables for details.

  Examples :
        http-check unset-var(check.port)


http-error status <code> [content-type <type>]
           [ { default-errorfiles | errorfile <file> | errorfiles <name> |
               file <file> | lf-file <file> | string <str> | lf-string <fmt> } ]
           [ hdr <name> <fmt> ]*
  Defines a custom error message to use instead of errors generated by HAProxy.

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :
    status <code>        is the HTTP status code. It must be specified.
                         Currently, HAProxy is capable of generating codes
                         200, 400, 401, 403, 404, 405, 407, 408, 410, 413,
                         414, 425, 429, 431, 500, 501, 502, 503, and 504.

    content-type <type>  is the response content type, for instance
                         "text/plain". This parameter is ignored and should be
                         omitted when an errorfile is configured or when the
                         payload is empty. Otherwise, it must be defined.

    default-errorfiles   Reset the previously defined error message for current
                         proxy for the status <code>. If used on a backend, the
                         frontend error message is used, if defined. If used on
                         a frontend, the default error message is used.

    errorfile <file>     designates a file containing the full HTTP response.
                         It is recommended to follow the common practice of
                         appending ".http" to the filename so that people do
                         not confuse the response with HTML error pages, and to
                         use absolute paths, since files are read before any
                         chroot is performed.

    errorfiles <name>    designates the http-errors section to use to import
                         the error message with the status code <code>. If no
                         such message is found, the proxy's error messages are
                         considered.

    file <file>          specifies the file to use as response payload. If the
                         file is not empty, its content-type must be set as
                         argument to "content-type", otherwise, any
                         "content-type" argument is ignored. <file> is
                         considered as a raw string.

    string <str>         specifies the raw string to use as response payload.
                         The content-type must always be set as argument to
                         "content-type".

    lf-file <file>       specifies the file to use as response payload. If the
                         file is not empty, its content-type must be set as
                         argument to "content-type", otherwise, any
                         "content-type" argument is ignored. <file> is
                         evaluated as a Custom log format (see section 8.2.6).

    lf-string <str>      specifies the log-format string to use as response
                         payload. The content-type must always be set as
                         argument to "content-type".

    hdr <name> <fmt>     adds to the response the HTTP header field whose name
                         is specified in <name> and whose value is defined by
                         <fmt>, which follows the Custom log format rules (see
                         section 8.2.6). This parameter is ignored if an
                         errorfile is used.

  This directive may be used instead of "errorfile", to define a custom error
  message. As "errorfile" directive, it is used for errors detected and
  returned by HAProxy. If an errorfile is defined, it is parsed when HAProxy
  starts and must be valid according to the HTTP standards. The generated
  response must not exceed the configured buffer size (BUFFSIZE), otherwise an
  internal error will be returned.  Finally, if you consider to use some
  http-after-response rules to rewrite these errors, the reserved buffer space
  should be available (see "tune.maxrewrite").

  The files are read at the same time as the configuration and kept in memory.
  For this reason, the errors continue to be returned even when the process is
  chrooted, and no file change is considered while the process is running.

  Note: 400/408/500 errors emitted in early stage of the request parsing are
        handled by the multiplexer at a lower level. No custom formatting is
        supported at this level. Thus only static error messages, defined with
        "errorfile" directive, are supported. However, this limitation only
        exists during the request headers parsing or between two transactions.

  See also : "errorfile", "errorfiles", "errorloc", "errorloc302",
             "errorloc303" and section 12.4 about http-errors.


http-request <action> [options...] [ { if | unless } <condition> ]
  Access control for Layer 7 requests

  May be used in the following contexts: http

  May be used in sections:   defaults | frontend | listen | backend
                               yes(!) |    yes   |   yes  |   yes

  The http-request statement defines a set of rules which apply to layer 7
  processing. The rules are evaluated in their declaration order when they are
  met in a frontend, listen or backend section. Any rule may optionally be
  followed by an ACL-based condition, in which case it will only be evaluated
  if the condition evaluates to true.

  The condition is evaluated just before the action is executed, and the action
  is performed exactly once. As such, there is no problem if an action changes
  an element which is checked as part of the condition. This also means that
  multiple actions may rely on the same condition so that the first action that
  changes the condition's evaluation is sufficient to implicitly disable the
  remaining actions. This is used for example when trying to assign a value to
  a variable from various sources when it's empty. There is no limit to the
  number of "http-request" statements per instance.

  The first keyword after "http-request" in the syntax is the rule's action,
  optionally followed by a varying number of arguments for the action. The
  supported actions and their respective syntaxes are enumerated in section 4.3
  "Actions" (look for actions which tick "HTTP Req").

  This directive is only available from named defaults sections, not anonymous
  ones. Rules defined in the defaults section are evaluated before ones in the
  associated proxy section. To avoid ambiguities, in this case the same
  defaults section cannot be used by proxies with the frontend capability and
  by proxies with the backend capability. It means a listen section cannot use
  a defaults section defining such rules.

  Example:
        acl nagios src 192.168.129.3
        acl local_net src 192.168.0.0/16
        acl auth_ok http_auth(L1)

        http-request allow if nagios
        http-request allow if local_net auth_ok
        http-request auth realm Gimme if local_net auth_ok
        http-request deny

  Example:
        acl key req.hdr(X-Add-Acl-Key) -m found
        acl add path /addacl
        acl del path /delacl

        acl myhost hdr(Host) -f myhost.lst

        http-request add-acl(myhost.lst) %[req.hdr(X-Add-Acl-Key)] if key add
        http-request del-acl(myhost.lst) %[req.hdr(X-Add-Acl-Key)] if key del

  Example:
        acl value  req.hdr(X-Value) -m found
        acl setmap path /setmap
        acl delmap path /delmap

        use_backend bk_appli if { hdr(Host),map_str(map.lst) -m found }

        http-request set-map(map.lst) %[src] %[req.hdr(X-Value)] if setmap value
        http-request del-map(map.lst) %[src]                     if delmap

  See also : "stats http-request", section 12.2 about userlists and section 7
             about ACL usage.

http-response <action> <options...> [ { if | unless } <condition> ]
  Access control for Layer 7 responses

  May be used in the following contexts: http

  May be used in sections:   defaults | frontend | listen | backend
                               yes(!) |    yes   |   yes  |   yes

  The http-response statement defines a set of rules which apply to layer 7
  processing. The rules are evaluated in their declaration order when they are
  met in a frontend, listen or backend section. Since these rules apply on
  responses, the backend rules are applied first, followed by the frontend's
  rules. Any rule may optionally be followed by an ACL-based condition, in
  which case it will only be evaluated if the condition evaluates to true.

  The condition is evaluated just before the action is executed, and the action
  is performed exactly once. As such, there is no problem if an action changes
  an element which is checked as part of the condition. This also means that
  multiple actions may rely on the same condition so that the first action that
  changes the condition's evaluation is sufficient to implicitly disable the
  remaining actions. This is used for example when trying to assign a value to
  a variable from various sources when it's empty. There is no limit to the
  number of "http-response" statements per instance.

  The first keyword after "http-response" in the syntax is the rule's action,
  optionally followed by a varying number of arguments for the action. The
  supported actions and their respective syntaxes are enumerated in section 4.3
  "Actions" (look for actions which tick "HTTP Res").

  This directive is only available from named defaults sections, not anonymous
  ones. Rules defined in the defaults section are evaluated before ones in the
  associated proxy section. To avoid ambiguities, in this case the same
  defaults section cannot be used by proxies with the frontend capability and
  by proxies with the backend capability. It means a listen section cannot use
  a defaults section defining such rules.

  Example:
    acl key_acl res.hdr(X-Acl-Key) -m found

    acl myhost hdr(Host) -f myhost.lst

    http-response add-acl(myhost.lst) %[res.hdr(X-Acl-Key)] if key_acl
    http-response del-acl(myhost.lst) %[res.hdr(X-Acl-Key)] if key_acl

  Example:
    acl value  res.hdr(X-Value) -m found

    use_backend bk_appli if { hdr(Host),map_str(map.lst) -m found }

    http-response set-map(map.lst) %[src] %[res.hdr(X-Value)] if value
    http-response del-map(map.lst) %[src]                     if ! value

  See also : "http-request", section 12.2 about userlists and section 7 about
             ACL usage.

http-reuse { never | safe | aggressive | always }
  Declare how idle HTTP connections may be shared between requests

  May be used in the following contexts: http

  May be used in sections:   defaults | frontend | listen | backend
                               yes    |    no    |   yes  |   yes

  In order to avoid the cost of setting up new connections to backend servers
  for each HTTP request, HAProxy tries to keep such idle connections opened
  after being used. These connections are specific to a server and are stored
  in a list called a pool, and are grouped together by a set of common key
  properties. Subsequent HTTP requests will cause a lookup of a compatible
  connection sharing identical properties in the associated pool and result in
  this connection being reused instead of establishing a new one.

  A limit on the number of idle connections to keep on a server can be
  specified via the "pool-max-conn" server keyword. Unused connections are
  periodically purged according to the "pool-purge-delay" interval.

  The following connection properties are used to determine if an idle
  connection is eligible for reuse on a given request:
  - source and destination addresses
  - proxy protocol
  - TOS and mark socket options
  - connection name, determined either by the result of the evaluation of the
    "pool-conn-name" expression if present, otherwise by the "sni" expression

  In some occasions, connection lookup or reuse is not performed due to extra
  restrictions. This is determined by the reuse strategy specified via the
  keyword argument:

    - "never"  : idle connections are never shared between sessions. This mode
                 may be enforced to cancel a different strategy inherited from
                 a defaults section or for troubleshooting. For example, if an
                 old bogus application considers that multiple requests over
                 the same connection come from the same client and it is not
                 possible to fix the application, it may be desirable to
                 disable connection sharing in a single backend. An example of
                 such an application could be an old HAProxy using cookie
                 insertion in tunnel mode and not checking any request past the
                 first one.

    - "safe"   : this is the default and the recommended strategy. The first
                 request of a session is always sent over its own connection,
                 and only subsequent requests may be dispatched over other
                 existing connections. This ensures that in case the server
                 closes the connection when the request is being sent, the
                 browser can decide to silently retry it. Since it is exactly
                 equivalent to regular keep-alive, there should be no side
                 effects. There is also a special handling for the connections
                 using protocols subject to Head-of-line blocking (backend with
                 h2 or fcgi). In this case, when at least one stream is
                 processed, the used connection is reserved to handle streams
                 of the same session. When no more streams are processed, the
                 connection is released and can be reused.

    - "aggressive" : this mode may be useful in webservices environments where
                 all servers are not necessarily known and where it would be
                 appreciable to deliver most first requests over existing
                 connections. In this case, first requests are only delivered
                 over existing connections that have been reused at least once,
                 proving that the server correctly supports connection reuse.
                 It should only be used when it's sure that the client can
                 retry a failed request once in a while and where the benefit
                 of aggressive connection reuse significantly outweighs the
                 downsides of rare connection failures.

    - "always" : this mode is only recommended when the path to the server is
                 known for never breaking existing connections quickly after
                 releasing them. It allows the first request of a session to be
                 sent to an existing connection. This can provide a significant
                 performance increase over the "safe" strategy when the backend
                 is a cache farm, since such components tend to show a
                 consistent behavior and will benefit from the connection
                 sharing. It is recommended that the "http-keep-alive" timeout
                 remains low in this mode so that no dead connections remain
                 usable. In most cases, this will lead to the same performance
                 gains as "aggressive" but with more risks. It should only be
                 used when it improves the situation over "aggressive".

  Also note that connections with certain bogus authentication schemes (relying
  on the connection) like NTLM are marked private if possible and never shared.
  This won't be the case however when using a protocol with multiplexing
  abilities and using reuse mode level value greater than the default "safe"
  strategy as in this case nothing prevents the connection from being already
  shared.

  The rules to decide to keep an idle connection opened or to close it after
  processing are also governed by the "tune.pool-low-fd-ratio" (default: 20%)
  and "tune.pool-high-fd-ratio" (default: 25%). These correspond to the
  percentage of total file descriptors spent in idle connections above which
  haproxy will respectively refrain from keeping a connection opened after a
  response, and actively kill idle connections. Some setups using a very high
  ratio of idle connections, either because of too low a global "maxconn", or
  due to a lot of HTTP/2 or HTTP/3 traffic on the frontend (few connections)
  but HTTP/1 connections on the backend, may observe a lower reuse rate because
  too few connections are kept open. It may be desirable in this case to adjust
  such thresholds or simply to increase the global "maxconn" value.

  When thread groups are explicitly enabled, it is important to understand that
  idle connections are only usable between threads from a same group. As such
  it may happen that unfair load between groups leads to more idle connections
  being needed, causing a lower reuse rate. The same solution may then be
  applied (increase global "maxconn" or increase pool ratios).

  See also : "option http-keep-alive", "pool-conn-name", "pool-max-conn",
             "pool-purge-delay", "server maxconn", "sni", "thread-groups",
             "tune.pool-high-fd-ratio", "tune.pool-low-fd-ratio"


http-send-name-header [<header>]
  Add the server name to a request. Use the header string given by <header>

  May be used in the following contexts: http

  May be used in sections:   defaults | frontend | listen | backend
                               yes    |    no    |   yes  |   yes

  Arguments :
    <header>  The header string to use to send the server name

  The "http-send-name-header" statement causes the header field named <header>
  to be set to the name of the target server at the moment the request is about
  to be sent on the wire. Any existing occurrences of this header are removed.
  Upon retries and redispatches, the header field is updated to always reflect
  the server being attempted to connect to. Given that this header is modified
  very late in the connection setup, it may have unexpected effects on already
  modified headers. For example using it with transport-level header such as
  connection, content-length, transfer-encoding and so on will likely result in
  invalid requests being sent to the server. Additionally it has been reported
  that this directive is currently being used as a way to overwrite the Host
  header field in outgoing requests; while this trick has been known to work
  as a side effect of the feature for some time, it is not officially supported
  and might possibly not work anymore in a future version depending on the
  technical difficulties this feature induces. A long-term solution instead
  consists in fixing the application which required this trick so that it binds
  to the correct host name.

  See also : "server"

id <value>
  Set a persistent ID to a proxy.

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                  no   |    yes   |   yes  |   yes

  Arguments : none

  Set a persistent ID for the proxy. This ID must be unique and positive.
  An unused ID will automatically be assigned if unset. The first assigned
  value will be 1. This ID is currently only returned in statistics.


ignore-persist { if | unless } <condition>
  Declare a condition to ignore persistence

  May be used in the following contexts: tcp, http

  May be used in sections:    defaults | frontend | listen | backend
                                  no   |    no    |   yes  |   yes

  By default, when cookie persistence is enabled, every requests containing
  the cookie are unconditionally persistent (assuming the target server is up
  and running).

  The "ignore-persist" statement allows one to declare various ACL-based
  conditions which, when met, will cause a request to ignore persistence.
  This is sometimes useful to load balance requests for static files, which
  often don't require persistence. This can also be used to fully disable
  persistence for a specific User-Agent (for example, some web crawler bots).

  The persistence is ignored when an "if" condition is met, or unless an
  "unless" condition is met.

  Example:
      acl url_static  path_beg         /static /images /img /css
      acl url_static  path_end         .gif .png .jpg .css .js
      ignore-persist  if url_static

  See also : "force-persist", "cookie", and section 7 about ACL usage.

load-server-state-from-file { global | local | none }
  Allow seamless reload of HAProxy

  May be used in the following contexts: tcp, http, log

  May be used in sections:    defaults | frontend | listen | backend
                                  yes   |    no   |   yes  |   yes

  This directive points HAProxy to a file where server state from previous
  running process has been saved. That way, when starting up, before handling
  traffic, the new process can apply old states to servers exactly has if no
  reload occurred. The purpose of the "load-server-state-from-file" directive is
  to tell HAProxy which file to use. For now, only 2 arguments to either prevent
  loading state or load states from a file containing all backends and servers.
  The state file can be generated by running the command "show servers state"
  over the stats socket and redirect output.

  The format of the file is versioned and is very specific. To understand it,
  please read the documentation of the "show servers state" command (chapter
  9.3 of Management Guide).

  Arguments:
    global     load the content of the file pointed by the global directive
               named "server-state-file".

    local      load the content of the file pointed by the directive
               "server-state-file-name" if set. If not set, then the backend
               name is used as a file name.

    none       don't load any stat for this backend

  Notes:
    - server's IP address is preserved across reloads by default, but the
      order can be changed thanks to the server's "init-addr" setting. This
      means that an IP address change performed on the CLI at run time will
      be preserved, and that any change to the local resolver (e.g. /etc/hosts)
      will possibly not have any effect if the state file is in use.

    - server's weight is applied from previous running process unless it has
      has changed between previous and new configuration files.

  Example: Minimal configuration

      global
       stats socket /tmp/socket
       server-state-file /tmp/server_state

      defaults
       load-server-state-from-file global

      backend bk
       server s1 127.0.0.1:22 check weight 11
       server s2 127.0.0.1:22 check weight 12


  Then one can run :

    socat /tmp/socket - <<< "show servers state" > /tmp/server_state

  Content of the file /tmp/server_state would be like this:

    1
    # <field names skipped for the doc example>
    1 bk 1 s1 127.0.0.1 2 0 11 11 4 6 3 4 6 0 0
    1 bk 2 s2 127.0.0.1 2 0 12 12 4 6 3 4 6 0 0

  Example: Minimal configuration

    global
     stats socket /tmp/socket
     server-state-base /etc/haproxy/states

    defaults
     load-server-state-from-file local

    backend bk
     server s1 127.0.0.1:22 check weight 11
     server s2 127.0.0.1:22 check weight 12


  Then one can run :

    socat /tmp/socket - <<< "show servers state bk" > /etc/haproxy/states/bk

  Content of the file /etc/haproxy/states/bk would be like this:

    1
    # <field names skipped for the doc example>
    1 bk 1 s1 127.0.0.1 2 0 11 11 4 6 3 4 6 0 0
    1 bk 2 s2 127.0.0.1 2 0 12 12 4 6 3 4 6 0 0

  See also: "server-state-file", "server-state-file-name", and
  "show servers state"


log global
log <target> [len <length>] [format <format>] [sample <ranges>:<sample_size>]
    [profile <prof>] <facility> [<level> [<minlevel>]]
no log
  Enable per-instance logging of events and traffic.

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Prefix :
    no         should be used when the logger list must be flushed. For example,
               if you don't want to inherit from the default logger list. This
               prefix does not allow arguments.

  Arguments :
    global     should be used when the instance's logging parameters are the
               same as the global ones. This is the most common usage. "global"
               replaces all log arguments with those of the log entries found
               in the "global" section. Only one "log global" statement may be
               used per instance, and this form takes no other parameter.

    <target>   indicates where to send the logs. It takes the same format as
               for the "global" section's logs, and can be one of :

               - An IPv4 address optionally followed by a colon (':') and a UDP
                 port. If no port is specified, 514 is used by default (the
                 standard syslog port).

               - An IPv6 address followed by a colon (':') and optionally a UDP
                 port. If no port is specified, 514 is used by default (the
                 standard syslog port).

               - A filesystem path to a UNIX domain socket, keeping in mind
                 considerations for chroot (be sure the path is accessible
                 inside the chroot) and uid/gid (be sure the path is
                 appropriately writable).

               - A file descriptor number in the form "fd@<number>", which may
                 point to a pipe, terminal, or socket. In this case unbuffered
                 logs are used and one writev() call per log is performed. This
                 is a bit expensive but acceptable for most workloads. Messages
                 sent this way will not be truncated but may be dropped, in
                 which case the DroppedLogs counter will be incremented. The
                 writev() call is atomic even on pipes for messages up to
                 PIPE_BUF size, which POSIX recommends to be at least 512 and
                 which is 4096 bytes on most modern operating systems. Any
                 larger message may be interleaved with messages from other
                 processes.  Exceptionally for debugging purposes the file
                 descriptor may also be directed to a file, but doing so will
                 significantly slow HAProxy down as non-blocking calls will be
                 ignored. Also there will be no way to purge nor rotate this
                 file without restarting the process. Note that the configured
                 syslog format is preserved, so the output is suitable for use
                 with a TCP syslog server. See also the "short" and "raw"
                 formats below.

               - "stdout" / "stderr", which are respectively aliases for "fd@1"
                 and "fd@2", see above.

               - A ring buffer in the form "ring@<name>", which will correspond
                 to an in-memory ring buffer accessible over the CLI using the
                 "show events" command, which will also list existing rings and
                 their sizes. Such buffers are lost on reload or restart but
                 when used as a complement this can help troubleshooting by
                 having the logs instantly available. See section 12.5 about
                 rings.

               - A log backend in the form "backend@<name>", which will send
                 log messages to the corresponding log backend responsible for
                 sending the message to the proper server according to the
                 backend's lb settings. A log backend is a backend section with
                 "mode log" set (see "mode" for more information).

               - An explicit stream address prefix such as "tcp@","tcp6@",
                 "tcp4@" or "uxst@" will allocate an implicit ring buffer with
                 a stream forward server targeting the given address.

               You may want to reference some environment variables in the
               address parameter, see section 2.3 about environment variables.

    <length>   is an optional maximum line length. Log lines larger than this
               value will be truncated before being sent. The reason is that
               syslog servers act differently on log line length. All servers
               support the default value of 1024, but some servers simply drop
               larger lines while others do log them. If a server supports long
               lines, it may make sense to set this value here in order to avoid
               truncating long lines. Similarly, if a server drops long lines,
               it is preferable to truncate them before sending them. Accepted
               values are 80 to 65535 inclusive. The default value of 1024 is
               generally fine for all standard usages. Some specific cases of
               long captures or JSON-formatted logs may require larger values.
               You may also need to increase "tune.http.logurilen" if your
               request URIs are truncated.

    <ranges>   A list of comma-separated ranges to identify the logs to sample.
               This is used to balance the load of the logs to send to the log
               server. The limits of the ranges cannot be null. They are numbered
               from 1. The size or period (in number of logs) of the sample must
               be set with <sample_size> parameter.

    <sample_size>
               The size of the sample in number of logs to consider when balancing
               their logging loads. It is used to balance the load of the logs to
               send to the syslog server. This size must be greater or equal to the
               maximum of the high limits of the ranges.
               (see also <ranges> parameter).

    <format> is the log format used when generating syslog messages. It may be
             one of the following :

      local     Analog to rfc3164 syslog message format except that hostname
                field is stripped. This is the default.
                Note: option "log-send-hostname" switches the default to
                rfc3164.

      rfc3164   The RFC3164 syslog message format.
                (https://tools.ietf.org/html/rfc3164)

      rfc5424   The RFC5424 syslog message format.
                (https://tools.ietf.org/html/rfc5424)

      priority  A message containing only a level plus syslog facility between
                angle brackets such as '<63>', followed by the text. The PID,
                date, time, process name and system name are omitted. This is
                designed to be used with a local log server.

      short     A message containing only a level between angle brackets such as
                '<3>', followed by the text. The PID, date, time, process name
                and system name are omitted. This is designed to be used with a
                local log server. This format is compatible with what the
                systemd logger consumes.

      timed     A message containing only a level between angle brackets such as
                '<3>', followed by ISO date and by the text. The PID, process
                name and system name are omitted. This is designed to be
                used with a local log server.

      iso       A message containing only the ISO date, followed by the text.
                The PID, process name and system name are omitted. This is
                designed to be used with a local log server.

      raw       A message containing only the text. The level, PID, date, time,
                process name and system name are omitted. This is designed to
                be used in containers or during development, where the severity
                only depends on the file descriptor used (stdout/stderr).

    <prof>     name of the optional "log-profile" section that will be
               considered during the log building process to override some
               log options. Check out "8.3.5. Log profiles" for more info.

    <facility> must be one of the 24 standard syslog facilities :

                   kern   user   mail   daemon auth   syslog lpr    news
                   uucp   cron   auth2  ftp    ntp    audit  alert  cron2
                   local0 local1 local2 local3 local4 local5 local6 local7

               Note that the facility is ignored for the "short" and "raw"
               formats, but still required as a positional field. It is
               recommended to use "daemon" in this case to make it clear that
               it's only supposed to be used locally.

    <level>    is optional and can be specified to filter outgoing messages. By
               default, all messages are sent. If a level is specified, only
               messages with a severity at least as important as this level
               will be sent. An optional minimum level can be specified. If it
               is set, logs emitted with a more severe level than this one will
               be capped to this level. This is used to avoid sending "emerg"
               messages on all terminals on some default syslog configurations.
               Eight levels are known :

                 emerg  alert  crit   err    warning notice info  debug

  It is important to keep in mind that it is the frontend which decides what to
  log from a connection, and that in case of content switching, the log entries
  from the backend will be ignored. Connections are logged at level "info".

  However, backend log declaration define how and where servers status changes
  will be logged. Level "notice" will be used to indicate a server going up,
  "warning" will be used for termination signals and definitive service
  termination, and "alert" will be used for when a server goes down.

  Note : According to RFC3164, messages are truncated to 1024 bytes before
         being emitted.

  Example :
    log global
    log stdout format short daemon          # send log to systemd
    log stdout format raw daemon            # send everything to stdout
    log stderr format raw daemon notice     # send important events to stderr
    log 127.0.0.1:514 local0 notice         # only send important events
    log tcp@127.0.0.1:514 local0 notice notice  # same but limit output
                                                # level and send in tcp
    log "${LOCAL_SYSLOG}:514" local0 notice   # send to local server

log-format <fmt>
  Specifies the custom log format string to use for traffic logs

  May be used in the following contexts: tcp, http

  May be used in sections:    defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |    no

  This directive specifies the log format string that will be used for all logs
  resulting from traffic passing through the frontend using this line. If the
  directive is used in a defaults section, all subsequent frontends will use
  the same log format. Please see section 8.2.6 which covers the custom log
  format string in depth.

  A specific log-format used only in case of connection error can also be
  defined, see the "error-log-format" option.

  "log-format" directive overrides previous "option tcplog", "log-format",
  "option httplog" and "option httpslog" directives.

log-format-sd <fmt>
  Specifies the Custom log format string used to produce RFC5424 structured-data

  May be used in the following contexts: tcp, http

  May be used in sections:    defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |    no

  This directive specifies the RFC5424 structured-data log format string that
  will be used for all logs resulting from traffic passing through the frontend
  using this line. If the directive is used in a defaults section, all
  subsequent frontends will use the same log format. Please see section 8.2.6
  which covers the log format string in depth.

  See https://tools.ietf.org/html/rfc5424#section-6.3 for more information
  about the RFC5424 structured-data part.

  Note : This log format string will be used only for loggers that have set
         log format to "rfc5424".

  Example :
    log-format-sd [exampleSDID@1234\ bytes=\"%B\"\ status=\"%ST\"]

log-steps <steps>
  Specifies at which steps during transaction processing logs should be
  generated.

  May be used in the following contexts: tcp, http

  May be used in sections:    defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  During tcp/http transaction processing, haproxy may produce logs at different
  steps during the processing (ie: accept, connect, request, response, close).

  By default, HAProxy emits a single log per transaction, once all of the
  items used in the logformat expression could be satisfied, which means
  that in practice the log is usually emitted at the end of the transaction
  (after the end of the response for HTTP or end of connection for TCP),
  unless "option logasap" is used.

  The "log-steps" directive allows to refine the precise instants where
  logs will be emitted, and even permits to emit multiple logs for a
  same transaction. Special value 'all' may be used to enable all available
  log origins, making it possible to track a transaction from accept to close.
  Indidivual log origins may also be specified using their names separated by
  spaces to selectively enable when logs should be produced.

  Common log origins are: accept, connect, request, response, close.

  Example:
     frontend myfront
         option httplog
         log-steps accept,close         #only log accept and close for the txn

  Log origins specified as "logging steps" (such as accept, close) can be
  used as-is in log-profiles (after 'on' directive). Combining "log-steps"
  with log-profiles is really interesting to have fine-grained control over
  logs automatically generated by haproxy during transaction processing.

  See also : "log-profile"

log-tag <string>
  Specifies the log tag to use for all outgoing logs

  May be used in the following contexts: tcp, http, log

  May be used in sections:    defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Sets the tag field in the syslog header to this string. It defaults to the
  log-tag set in the global section, otherwise the program name as launched
  from the command line, which usually is "HAProxy". Sometimes it can be useful
  to differentiate between multiple processes running on the same host, or to
  differentiate customer instances running in the same process. In the backend,
  logs about servers up/down will use this tag. As a hint, it can be convenient
  to set a log-tag related to a hosted customer in a defaults section then put
  all the frontends and backends for that customer, then start another customer
  in a new defaults section. See also the global "log-tag" directive.

max-keep-alive-queue <value>
  Set the maximum server queue size for maintaining keep-alive connections

  May be used in the following contexts: http

  May be used in sections:    defaults | frontend | listen | backend
                                 yes   |     no   |   yes  |   yes

  HTTP keep-alive tries to reuse the same server connection whenever possible,
  but sometimes it can be counter-productive, for example if a server has a lot
  of connections while other ones are idle. This is especially true for static
  servers.

  The purpose of this setting is to set a threshold on the number of queued
  connections at which HAProxy stops trying to reuse the same server and prefers
  to find another one. The default value, -1, means there is no limit. A value
  of zero means that keep-alive requests will never be queued. For very close
  servers which can be reached with a low latency and which are not sensible to
  breaking keep-alive, a low value is recommended (e.g. local static server can
  use a value of 10 or less). For remote servers suffering from a high latency,
  higher values might be needed to cover for the latency and/or the cost of
  picking a different server.

  Note that this has no impact on responses which are maintained to the same
  server consecutively to a 401 response. They will still go to the same server
  even if they have to be queued.

  See also : "option http-server-close", "option prefer-last-server", server
             "maxconn" and cookie persistence.

max-session-srv-conns <nb>
  Set the maximum number of outgoing connections we can keep idling for a given
  client session. The default is 5 (it precisely equals MAX_SRV_LIST which is
  defined at build time).

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

maxconn <conns>
  Fix the maximum number of concurrent connections on a frontend

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments :
    <conns>   is the maximum number of concurrent connections the frontend will
              accept to serve. Excess connections will be queued by the system
              in the socket's listen queue and will be served once a connection
              closes.

  If the system supports it, it can be useful on big sites to raise this limit
  very high so that HAProxy manages connection queues, instead of leaving the
  clients with unanswered connection attempts. This value should not exceed the
  global maxconn. Also, keep in mind that a connection contains two buffers
  of tune.bufsize (16kB by default) each, as well as some other data resulting
  in about 33 kB of RAM being consumed per established connection. That means
  that a medium system equipped with 1GB of RAM can withstand around
  20000-25000 concurrent connections if properly tuned.

  Also, when <conns> is set to large values, it is possible that the servers
  are not sized to accept such loads, and for this reason it is generally wise
  to assign them some reasonable connection limits.

  When this value is set to zero, which is the default, the global "maxconn"
  value is used.

  See also : "server", global section's "maxconn", "fullconn"


mode { tcp|http|log|spop }
  Set the running mode or protocol of the instance
  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes
  Arguments :
    tcp       The instance will work in pure TCP mode. A full-duplex connection
              will be established between clients and servers, and no layer 7
              examination will be performed. This is the default mode. It
              should be used for SSL, SSH, SMTP, ...

    http      The instance will work in HTTP mode. The client request will be
              analyzed in depth before connecting to any server. Any request
              which is not RFC-compliant will be rejected. Layer 7 filtering,
              processing and switching will be possible. This is the mode which
              brings HAProxy most of its value.

    log       When used in a backend section, it will turn the backend into a
              log backend. Such backend can be used as a log destination for
              any "log" directive by using the "backend@<name>" syntax. Log
              messages will be distributed to the servers from the backend
              according to the lb settings which can be configured using the
              "balance" keyword. Log backends support UDP servers by prefixing
              the server's address with the "udp@" prefix. Common backend and
              server features are supported, but not TCP or HTTP specific ones.

    spop      When used in a backend section, it will turn the backend into a
              spop backend. This mode is mandatory if the backend contains
              SPOA servers, but when mode is tcp, it will automatically be
              converted to mode spop if such servers are detected.


  When doing content switching, it is mandatory that the frontend and the
  backend are in the same mode (generally HTTP), otherwise the configuration
  will be refused.

  Example :
     defaults http_instances
         mode http


monitor fail { if | unless } <condition>
  Add a condition to report a failure to a monitor HTTP request.

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 no    |    yes   |   yes  |   no

  Arguments :
    if <cond>     the monitor request will fail if the condition is satisfied,
                  and will succeed otherwise. The condition should describe a
                  combined test which must induce a failure if all conditions
                  are met, for instance a low number of servers both in a
                  backend and its backup.

    unless <cond> the monitor request will succeed only if the condition is
                  satisfied, and will fail otherwise. Such a condition may be
                  based on a test on the presence of a minimum number of active
                  servers in a list of backends.

  This statement adds a condition which can force the response to a monitor
  request to report a failure. By default, when an external component queries
  the URI dedicated to monitoring, a 200 response is returned. When one of the
  conditions above is met, HAProxy will return 503 instead of 200. This is
  very useful to report a site failure to an external component which may base
  routing advertisements between multiple sites on the availability reported by
  HAProxy. In this case, one would rely on an ACL involving the "nbsrv"
  criterion. Note that "monitor fail" only works in HTTP mode. Both status
  messages may be tweaked using "errorfile" or "errorloc" if needed.

  Example:
     frontend www
        mode http
        acl site_dead nbsrv(dynamic) lt 2
        acl site_dead nbsrv(static)  lt 2
        monitor-uri   /site_alive
        monitor fail  if site_dead

  See also : "monitor-uri", "errorfile", "errorloc"


monitor-uri <uri>
  Intercept a URI used by external components' monitor requests

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments :
    <uri>     is the exact URI which we want to intercept to return HAProxy's
              health status instead of forwarding the request.

  When an HTTP request referencing <uri> will be received on a frontend,
  HAProxy will not forward it nor log it, but instead will return either
  "HTTP/1.0 200 OK" or "HTTP/1.0 503 Service unavailable", depending on failure
  conditions defined with "monitor fail". This is normally enough for any
  front-end HTTP probe to detect that the service is UP and running without
  forwarding the request to a backend server. Note that the HTTP method, the
  version and all headers are ignored, but the request must at least be valid
  at the HTTP level. This keyword may only be used with an HTTP-mode frontend.

  Monitor requests are processed very early, just after the request is parsed
  and even before any "http-request". The only rulesets applied before are the
  tcp-request ones. They cannot be logged either, and it is the intended
  purpose. Only one URI may be configured for monitoring; when multiple
  "monitor-uri" statements are present, the last one will define the URI to
  be used. They are only used to report HAProxy's health to an upper component,
  nothing more. However, it is possible to add any number of conditions using
  "monitor fail" and ACLs so that the result can be adjusted to whatever check
  can be imagined (most often the number of available servers in a backend).

  Note: if <uri> starts by a slash ('/'), the matching is performed against the
        request's path instead of the request's uri. It is a workaround to let
        the HTTP/2 requests match the monitor-uri. Indeed, in HTTP/2, clients
        are encouraged to send absolute URIs only.

  Example :
    # Use /haproxy_test to report HAProxy's status
    frontend www
        mode http
        monitor-uri /haproxy_test

  See also : "monitor fail"


option abortonclose
no option abortonclose
  Enable or disable early dropping of aborted requests pending in queues.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |     no   |   yes  |   yes

  Arguments : none

  In presence of very high loads, the servers will take some time to respond.
  The per-instance connection queue will inflate, and the response time will
  increase respective to the size of the queue times the average per-stream
  response time. When clients will wait for more than a few seconds, they will
  often hit the "STOP" button on their browser, leaving a useless request in
  the queue, and slowing down other users, and the servers as well, because the
  request will eventually be served, then aborted at the first error
  encountered while delivering the response.

  As there is no way to distinguish between a full STOP and a simple output
  close on the client side, HTTP agents should be conservative and consider
  that the client might only have closed its output channel while waiting for
  the response. However, this introduces risks of congestion when lots of users
  do the same, and is completely useless nowadays because probably no client at
  all will close the stream while waiting for the response. Some HTTP agents
  support this behavior (Squid, Apache, HAProxy), and others do not (TUX, most
  hardware-based load balancers). So the probability for a closed input channel
  to represent a user hitting the "STOP" button is close to 100%, and the risk
  of being the single component to break rare but valid traffic is extremely
  low, which adds to the temptation to be able to abort a stream early while
  still not served and not pollute the servers.

  In HAProxy, the user can choose the desired behavior using the option
  "abortonclose". By default (without the option) the behavior is HTTP
  compliant and aborted requests will be served. But when the option is
  specified, a stream with an incoming channel closed will be aborted while
  it is still possible, either pending in the queue for a connection slot, or
  during the connection establishment if the server has not yet acknowledged
  the connection request. This considerably reduces the queue size and the load
  on saturated servers when users are tempted to click on STOP, which in turn
  reduces the response time for other users.

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also : "timeout queue" and server's "maxconn" and "maxqueue" parameters


option accept-invalid-http-request     (deprecated)
no option accept-invalid-http-request  (deprecated)
  Enable or disable relaxing of HTTP request parsing

  The "accept-invalid-http-request" keyword is deprecated, use "option
  accept-unsafe-violations-in-http-request" instead.


option accept-invalid-http-response     (deprecated)
no option accept-invalid-http-response  (deprecated)
  Enable or disable relaxing of HTTP response parsing

  The "accept-invalid-http-response" keyword is deprecated, use "option
  accept-unsafe-violations-in-http-response" instead.


option accept-unsafe-violations-in-http-request
no option accept-unsafe-violations-in-http-request
  Enable or disable relaxing of HTTP request parsing

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments : none

  By default, HAProxy complies with the different HTTP RFCs in terms of message
  parsing. This means the message parsing is quite strict and causes an error
  to be returned to the client for malformed messages. This is the desired
  behavior as such malformed messages are essentially used to build attacks
  exploiting server weaknesses, and bypass security filtering. Sometimes, a
  buggy browser will not respect these RCFs for whatever reason (configuration,
  implementation...) and the issue will not be immediately fixed. In such case,
  it is possible to relax HAProxy's parser to accept some invalid requests by
  specifying this option. Most of rules concern the H1 parsing for historical
  reason. Newer HTTP versions tends to be cleaner and applications follow more
  stickly these protocols.

  When this option is set, the following rules are observed:

    * In H1 only, invalid characters, including NULL character, in header name
      will be accepted;

    * In H1 only, NULL character in header value will be accepted;

    * In H1 only, characters above 127 in the URI will be accepted. The list of
      characters allowed to appear in a URI is well defined by RFC3986, and
      chars 0-31, 32 (space), 34 ('"'), 60 ('<'), 62 ('>'), 92 ('\'), 94 ('^'),
      96 ('`'), 123 ('{'), 124 ('|'), 125 ('}'), 127 (delete) and anything
      above are normally not allowed. In H1, all character between (0..32) and
      127 will always be blocked. All characters above 127 (excluded) will also
      be blocked, except when this option is enabled. Other characters
      (33..126) will not be checked at all.

    * In H1 and H2, URLs containing fragment references ('#' after the path)
      will be accepted;

    * In H1 only, no check will be performed on the authority for CONNECT
      requests;

    * In H1 only, no check will be performed against the authority and the Host
      header value.

    * In H1 only, tests on the HTTP version will be relaxed. It will allow
      HTTP/0.9 GET requests to pass through (no version specified), as well as
      different protocol names (e.g. RTSP), and multiple digits for both the
      major and the minor version.

    * In H1 only, WebSocket (RFC6455) requests failing to present a valid
      "Sec-Websocket-Key" header field will be accepted.

  This option should never be enabled by default as it hides application bugs
  and open security breaches. It should only be deployed after a problem has
  been confirmed.

  When this option is enabled, invalid but accepted H1 requests will be
  captured in order to permit later analysis using the "show errors" request on
  the UNIX stats socket.Doing this also helps confirming that the issue has
  been solved.

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also : "option accept-unsafe-violations-in-http-response" and "show
             errors" on the stats socket.


option accept-unsafe-violations-in-http-response
no option accept-unsafe-violations-in-http-response
  Enable or disable relaxing of HTTP response parsing

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |     no   |   yes  |   yes

  Arguments : none

  Similarly to "option accept-unsafe-violations-in-http-request", this option
  may be used to relax parsing rules of HTTP responses. It should only be
  enabled for trusted legacy servers to accept some invalid responses. Most of
  rules concern the H1 parsing for historical reason. Newer HTTP versions tends
  to be cleaner and applications follow more stickly these protocols.

  When this option is set, the following rules are observed:

    * In H1 only, invalid characters, including NULL character, in header name
      will be accepted;

    * In H1 only, NULL character in header value will be accepted;

    * In H1 only, empty values or several "chunked" value occurrences for
      Transfer-Encoding header will be accepted;

    * In H1 only, no check will be performed against the authority and the Host
      header value.

    * In H1 only, tests on the HTTP version will be relaxed. It will allow
      different protocol names (e.g. RTSP), and multiple digits for both the
      major and the minor version.

    * In H1 only, WebSocket (RFC6455) responses failing to present a valid
      "Sec-Websocket-Accept" header field will be accepted.

  This option should never be enabled by default as it hides application bugs
  and open security breaches. It should only be deployed after a problem has
  been confirmed.

  When this option is enabled, erroneous header names will still be accepted in
  responses, but the complete response will be captured in order to permit
  later analysis using the "show errors" request on the UNIX stats socket.
  Doing this also helps confirming that the issue has been solved.

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also : "option accept-unsafe-violations-in-http-request" and "show
             errors" on the stats socket.


option allbackups
no option allbackups
  Use either all backup servers at a time or only the first one

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |     no   |   yes  |   yes

  Arguments : none

  By default, the first operational backup server gets all traffic when normal
  servers are all down. Sometimes, it may be preferred to use multiple backups
  at once, because one will not be enough. When "option allbackups" is enabled,
  the load balancing will be performed among all backup servers when all normal
  ones are unavailable. The same load balancing algorithm will be used and the
  servers' weights will be respected. Thus, there will not be any priority
  order between the backup servers anymore.

  This option is mostly used with static server farms dedicated to return a
  "sorry" page when an application is completely offline.

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.


option checkcache
no option checkcache
  Analyze all server responses and block responses with cacheable cookies

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |     no   |   yes  |   yes

  Arguments : none

  Some high-level frameworks set application cookies everywhere and do not
  always let enough control to the developer to manage how the responses should
  be cached. When a session cookie is returned on a cacheable object, there is a
  high risk of session crossing or stealing between users traversing the same
  caches. In some situations, it is better to block the response than to let
  some sensitive session information go in the wild.

  The option "checkcache" enables deep inspection of all server responses for
  strict compliance with HTTP specification in terms of cacheability. It
  carefully checks "Cache-control", "Pragma" and "Set-cookie" headers in server
  response to check if there's a risk of caching a cookie on a client-side
  proxy. When this option is enabled, the only responses which can be delivered
  to the client are :
    - all those without "Set-Cookie" header;
    - all those with a return code other than 200, 203, 204, 206, 300, 301,
      404, 405, 410, 414, 501, provided that the server has not set a
      "Cache-control: public" header field;
    - all those that result from a request using a method other than GET, HEAD,
      OPTIONS, TRACE, provided that the server has not set a 'Cache-Control:
      public' header field;
    - those with a 'Pragma: no-cache' header
    - those with a 'Cache-control: private' header
    - those with a 'Cache-control: no-store' header
    - those with a 'Cache-control: max-age=0' header
    - those with a 'Cache-control: s-maxage=0' header
    - those with a 'Cache-control: no-cache' header
    - those with a 'Cache-control: no-cache="set-cookie"' header
    - those with a 'Cache-control: no-cache="set-cookie,' header
      (allowing other fields after set-cookie)

  If a response doesn't respect these requirements, then it will be blocked
  just as if it was from an "http-response deny" rule, with an "HTTP 502 bad
  gateway". The session state shows "PH--" meaning that the proxy blocked the
  response during headers processing. Additionally, an alert will be sent in
  the logs so that admins are informed that there's something to be fixed.

  Due to the high impact on the application, the application should be tested
  in depth with the option enabled before going to production. It is also a
  good practice to always activate it during tests, even if it is not used in
  production, as it will report potentially dangerous application behaviors.

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.


option clitcpka
no option clitcpka
  Enable or disable the sending of TCP keepalive packets on the client side

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments : none

  When there is a firewall or any session-aware component between a client and
  a server, and when the protocol involves very long sessions with long idle
  periods (e.g. remote desktops), there is a risk that one of the intermediate
  components decides to expire a session which has remained idle for too long.

  Enabling socket-level TCP keep-alives makes the system regularly send packets
  to the other end of the connection, leaving it active. The delay between
  keep-alive probes is controlled by the system only and depends both on the
  operating system and its tuning parameters.

  It is important to understand that keep-alive packets are neither emitted nor
  received at the application level. It is only the network stacks which sees
  them. For this reason, even if one side of the proxy already uses keep-alives
  to maintain its connection alive, those keep-alive packets will not be
  forwarded to the other side of the proxy.

  Please note that this has nothing to do with HTTP keep-alive.

  Using option "clitcpka" enables the emission of TCP keep-alive probes on the
  client side of a connection, which should help when session expirations are
  noticed between HAProxy and a client.

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also : "option srvtcpka", "option tcpka"


option contstats
  Enable continuous traffic statistics updates

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments : none

  By default, counters used for statistics calculation are incremented
  only when a stream finishes. It works quite well when serving small
  objects, but with big ones (for example large images or archives) or
  with A/V streaming, a graph generated from HAProxy counters looks like
  a hedgehog. With this option enabled counters get incremented frequently
  along the stream, typically every 5 seconds, which is often enough to
  produce clean graphs. Recounting touches a hotpath directly so it is not
  not enabled by default, as it can cause a lot of wakeups for very large
  session counts and cause a small performance drop.

option disable-h2-upgrade
no option disable-h2-upgrade
  Enable or disable the implicit HTTP/2 upgrade from an HTTP/1.x client
  connection.

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments : none

  By default, HAProxy is able to implicitly upgrade an HTTP/1.x client
  connection to an HTTP/2 connection if the first request it receives from a
  given HTTP connection matches the HTTP/2 connection preface (i.e. the string
  "PRI * HTTP/2.0\r\n\r\nSM\r\n\r\n"). This way, it is possible to support
  HTTP/1.x and HTTP/2 clients on a non-SSL connections. This option must be
  used to disable the implicit upgrade. Note this implicit upgrade is only
  supported for HTTP proxies, thus this option too. Note also it is possible to
  force the HTTP/2 on clear connections by specifying "proto h2" on the bind
  line. Finally, this option is applied on all bind lines. To disable implicit
  HTTP/2 upgrades for a specific bind line, it is possible to use "proto h1".

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

option dontlog-normal
no option dontlog-normal
  Enable or disable logging of normal, successful connections

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments : none

  There are large sites dealing with several thousand connections per second
  and for which logging is a major pain. Some of them are even forced to turn
  logs off and cannot debug production issues. Setting this option ensures that
  normal connections, those which experience no error, no timeout, no retry nor
  redispatch, will not be logged. This leaves disk space for anomalies. In HTTP
  mode, the response status code is checked and return codes 5xx will still be
  logged.

  It is strongly discouraged to use this option as most of the time, the key to
  complex issues is in the normal logs which will not be logged here. If you
  need to separate logs, see the "log-separate-errors" option instead.

  See also : "log", "dontlognull", "log-separate-errors" and section 8 about
             logging.


option dontlognull
no option dontlognull
  Enable or disable logging of null connections

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments : none

  In certain environments, there are components which will regularly connect to
  various systems to ensure that they are still alive. It can be the case from
  another load balancer as well as from monitoring systems. By default, even a
  simple port probe or scan will produce a log. If those connections pollute
  the logs too much, it is possible to enable option "dontlognull" to indicate
  that a connection on which no data has been transferred will not be logged,
  which typically corresponds to those probes. Note that errors will still be
  returned to the client and accounted for in the stats. If this is not what is
  desired, option http-ignore-probes can be used instead.

  It is generally recommended not to use this option in uncontrolled
  environments (e.g. internet), otherwise scans and other malicious activities
  would not be logged.

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also : "log", "http-ignore-probes", "monitor-uri", and
             section 8 about logging.

option forwarded [ proto ]
                 [ host | host-expr <host_expr> ]
                 [ by | by-expr <by_expr> ] [ by_port | by_port-expr <by_port_expr>]
                 [ for | for-expr <for_expr> ] [ for_port | for_port-expr <for_port_expr>]
no option forwarded
  Enable insertion of the rfc 7239 forwarded header in requests sent to servers

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <host_expr>     optional argument to specify a custom sample expression
                    those result will be used as 'host' parameter value

    <by_expr>       optional argument to specify a custom sample expression
                    those result will be used as 'by' parameter nodename value

    <for_expr>      optional argument to specify a custom sample expression
                    those result will be used as 'for' parameter nodename value

    <by_port_expr>  optional argument to specify a custom sample expression
                    those result will be used as 'by' parameter nodeport value

    <for_port_expr> optional argument to specify a custom sample expression
                    those result will be used as 'for' parameter nodeport value


  Since HAProxy works in reverse-proxy mode, servers are losing some request
  context (request origin: client ip address, protocol used...)

  A common way to address this limitation is to use the well known
  x-forward-for and x-forward-* friends to expose some of this context to the
  underlying servers/applications.
  While this use to work and is widely deployed, it is not officially supported
  by the IETF and can be the root of some interoperability as well as security
  issues.

  To solve this, a new HTTP extension has been described by the IETF:
  forwarded header (RFC7239).
  More information here: https://www.rfc-editor.org/rfc/rfc7239.html

  The use of this single header allow to convey numerous details
  within the same header, and most importantly, fixes the proxy chaining
  issue. (the rfc allows for multiple chained proxies to append their own
  values to an already existing header).

  This option may be specified in defaults, listen or backend section, but it
  will be ignored for frontend sections.

  Setting option forwarded without arguments results in using default implicit
  behavior.
  Default behavior enables proto parameter and injects original client ip.

  The equivalent explicit/manual configuration would be:
        option forwarded proto for

  The keyword 'by' is used to enable 'by' parameter ("nodename") in
  forwarded header. It allows to embed request proxy information.
  'by' value will be set to proxy ip (destination address)
  If not available (ie: UNIX listener), 'by' will be set to
  "unknown".

  The keyword 'by-expr' is used to enable 'by' parameter ("nodename") in
  forwarded header. It allows to embed request proxy information.
  'by' value will be set to the result of the sample expression
  <by_expr>, if valid, otherwise it will be set to "unknown".

  The keyword 'for' is used to enable 'for' parameter ("nodename") in
  forwarded header. It allows to embed request client information.
  'for' value will be set to client ip (source address)
  If not available (ie: UNIX listener), 'for' will be set to
  "unknown".

  The keyword 'for-expr' is used to enable 'for' parameter ("nodename") in
  forwarded header. It allows to embed request client information.
  'for' value will be set to the result of the sample expression
  <for_expr>, if valid, otherwise it will be set to "unknown".

  The keyword 'by_port' is used to provide "nodeport" info to
  'by' parameter. 'by_port' requires 'by' or 'by-expr' to be set or
  it will be ignored.
  "nodeport" will be set to proxy (destination) port if available,
  otherwise it will be ignored.

  The keyword 'by_port-expr' is used to provide "nodeport" info to
  'by' parameter. 'by_port-expr' requires 'by' or 'by-expr' to be set or
  it will be ignored.
  "nodeport" will be set to the result of the sample expression
  <by_port_expr>, if valid, otherwise it will be ignored.

  The keyword 'for_port' is used to provide "nodeport" info to
  'for' parameter. 'for_port' requires 'for' or 'for-expr' to be set or
  it will be ignored.
  "nodeport" will be set to client (source) port if available,
  otherwise it will be ignored.

  The keyword 'for_port-expr' is used to provide "nodeport" info to
  'for' parameter. 'for_port-expr' requires 'for' or 'for-expr' to be set or
  it will be ignored.
  "nodeport" will be set to the result of the sample expression
  <for_port_expr>, if valid, otherwise it will be ignored.

  Examples :
    # Those servers want the ip address and protocol of the client request
    # Resulting header would look like this:
    #   forwarded: proto=http;for=127.0.0.1
    backend www_default
        mode http
        option forwarded
        #equivalent to: option forwarded proto for

    # Those servers want the requested host and hashed client ip address
    # as well as client source port (you should use seed for xxh32 if ensuring
    # ip privacy is a concern)
    # Resulting header would look like this:
    #   forwarded: host="haproxy.org";for="_000000007F2F367E:60138"
    backend www_host
        mode http
        option forwarded host for-expr src,xxh32,hex for_port

    # Those servers want custom data in host, for and by parameters
    # Resulting header would look like this:
    #   forwarded: host="host.com";by=_haproxy;for="[::1]:10"
    backend www_custom
        mode http
        option forwarded host-expr str(host.com) by-expr str(_haproxy) for for_port-expr int(10)

    # Those servers want random 'for' obfuscated identifiers for request
    # tracing purposes while protecting sensitive IP information
    # Resulting header would look like this:
    #   forwarded: for=_000000002B1F4D63
    backend www_for_hide
        mode http
        option forwarded for-expr rand,hex

  See also : "option forwardfor", "option originalto"

option forwardfor [ except <network> ] [ header <name> ] [ if-none ]
  Enable insertion of the X-Forwarded-For header to requests sent to servers

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :
    <network> is an optional argument used to disable this option for sources
              matching <network>
    <name>    an optional argument to specify a different "X-Forwarded-For"
              header name.

  Since HAProxy works in reverse-proxy mode, the servers see its IP address as
  their client address. This is sometimes annoying when the client's IP address
  is expected in server logs. To solve this problem, the well-known HTTP header
  "X-Forwarded-For" may be added by HAProxy to all requests sent to the server.
  This header contains a value representing the client's IP address. Since this
  header is always appended at the end of the existing header list, the server
  must be configured to always use the last occurrence of this header only. See
  the server's manual to find how to enable use of this standard header. Note
  that only the last occurrence of the header must be used, since it is really
  possible that the client has already brought one.

  The keyword "header" may be used to supply a different header name to replace
  the default "X-Forwarded-For". This can be useful where you might already
  have a "X-Forwarded-For" header from a different application (e.g. stunnel),
  and you need preserve it. Also if your backend server doesn't use the
  "X-Forwarded-For" header and requires different one (e.g. Zeus Web Servers
  require "X-Cluster-Client-IP").

  Sometimes, a same HAProxy instance may be shared between a direct client
  access and a reverse-proxy access (for instance when an SSL reverse-proxy is
  used to decrypt HTTPS traffic). It is possible to disable the addition of the
  header for a known source address or network by adding the "except" keyword
  followed by the network address. In this case, any source IP matching the
  network will not cause an addition of this header. Most common uses are with
  private networks or 127.0.0.1. IPv4 and IPv6 are both supported.

  Alternatively, the keyword "if-none" states that the header will only be
  added if it is not present. This should only be used in perfectly trusted
  environment, as this might cause a security issue if headers reaching HAProxy
  are under the control of the end-user.

  This option may be specified either in the frontend or in the backend. If at
  least one of them uses it, the header will be added. Note that the backend's
  setting of the header subargument takes precedence over the frontend's if
  both are defined. In the case of the "if-none" argument, if at least one of
  the frontend or the backend does not specify it, it wants the addition to be
  mandatory, so it wins.

  Example :
    # Public HTTP address also used by stunnel on the same machine
    frontend www
        mode http
        option forwardfor except 127.0.0.1  # stunnel already adds the header

    # Those servers want the IP Address in X-Client
    backend www
        mode http
        option forwardfor header X-Client

  See also : "option httpclose", "option http-server-close",
             "option http-keep-alive"


option h1-case-adjust-bogus-client
no option h1-case-adjust-bogus-client
  Enable or disable the case adjustment of HTTP/1 headers sent to bogus clients

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments : none

  There is no standard case for header names because, as stated in RFC7230,
  they are case-insensitive. So applications must handle them in a case-
  insensitive manner. But some bogus applications violate the standards and
  erroneously rely on the cases most commonly used by browsers. This problem
  becomes critical with HTTP/2 because all header names must be exchanged in
  lower case, and HAProxy follows the same convention. All header names are
  sent in lower case to clients and servers, regardless of the HTTP version.

  When HAProxy receives an HTTP/1 response, its header names are converted to
  lower case and manipulated and sent this way to the clients. If a client is
  known to violate the HTTP standards and to fail to process a response coming
  from HAProxy, it is possible to transform the lower case header names to a
  different format when the response is formatted and sent to the client, by
  enabling this option and specifying the list of headers to be reformatted
  using the global directives "h1-case-adjust" or "h1-case-adjust-file". This
  must only be a temporary workaround for the time it takes the client to be
  fixed, because clients which require such workarounds might be vulnerable to
  content smuggling attacks and must absolutely be fixed.

  Please note that this option will not affect standards-compliant clients.

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also: "option h1-case-adjust-bogus-server", "h1-case-adjust",
  "h1-case-adjust-file".


option h1-case-adjust-bogus-server
no option h1-case-adjust-bogus-server
  Enable or disable the case adjustment of HTTP/1 headers sent to bogus servers

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no   |   yes  |   yes

  Arguments : none

  There is no standard case for header names because, as stated in RFC7230,
  they are case-insensitive. So applications must handle them in a case-
  insensitive manner. But some bogus applications violate the standards and
  erroneously rely on the cases most commonly used by browsers. This problem
  becomes critical with HTTP/2 because all header names must be exchanged in
  lower case, and HAProxy follows the same convention. All header names are
  sent in lower case to clients and servers, regardless of the HTTP version.

  When HAProxy receives an HTTP/1 request, its header names are converted to
  lower case and manipulated and sent this way to the servers. If a server is
  known to violate the HTTP standards and to fail to process a request coming
  from HAProxy, it is possible to transform the lower case header names to a
  different format when the request is formatted and sent to the server, by
  enabling this option and specifying the list of headers to be reformatted
  using the global directives "h1-case-adjust" or "h1-case-adjust-file". This
  must only be a temporary workaround for the time it takes the server to be
  fixed, because servers which require such workarounds might be vulnerable to
  content smuggling attacks and must absolutely be fixed.

  Please note that this option will not affect standards-compliant servers.

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also: "option h1-case-adjust-bogus-client", "h1-case-adjust",
  "h1-case-adjust-file".


option http-buffer-request
no option http-buffer-request
  Enable or disable waiting for whole HTTP request body before proceeding

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments : none

  It is sometimes desirable to wait for the body of an HTTP request before
  taking a decision. This is what is being done by "balance url_param" for
  example. The first use case is to buffer requests from slow clients before
  connecting to the server. Another use case consists in taking the routing
  decision based on the request body's contents. This option placed in a
  frontend or backend forces the HTTP processing to wait until either the whole
  body is received or the request buffer is full. It can have undesired side
  effects with some applications abusing HTTP by expecting unbuffered
  transmissions between the frontend and the backend, so this should definitely
  not be used by default.

  See also : "option http-no-delay", "timeout http-request",
             "http-request wait-for-body"

option http-drop-request-trailers
no option http-drop-request-trailers
  Drop the HTTP trailers from the request when sent to the server

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no   |   no  |   yes

  Arguments : none

  When this option is enabled, any HTTP trailers found in a request will be
  dropped before sending it to the server.

  RFC9110#section-6.5.1 stated that trailer fields could be merged into the
  header fields. It should be done on purpose, but it may be a problem for some
  applications, espcially if malicious clients hide sensitive header fields in
  the trailers part and some intermediaries merge them with headers with no
  specific checks. In that case, this option can be enabled on the backend to
  drop any trailer fields found in requests before sending them to the server.

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also: "option http-drop-response-trailers"

option http-drop-response-trailers
no option http-drop-response-trailers
  Drop the HTTP trailers from the response when sent to the client

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments : none

  This option is similar to "option http-drop-request-trailers" but it must be
  used to drop trailer fields from responses before sending them to clients.

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also: "option http-drop-request-trailers"

option http-ignore-probes
no option http-ignore-probes
  Enable or disable logging of null connections and request timeouts

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments : none

  Recently some browsers started to implement a "pre-connect" feature
  consisting in speculatively connecting to some recently visited web sites
  just in case the user would like to visit them. This results in many
  connections being established to web sites, which end up in 408 Request
  Timeout if the timeout strikes first, or 400 Bad Request when the browser
  decides to close them first. These ones pollute the log and feed the error
  counters. There was already "option dontlognull" but it's insufficient in
  this case. Instead, this option does the following things :
     - prevent any 400/408 message from being sent to the client if nothing
       was received over a connection before it was closed;
     - prevent any log from being emitted in this situation;
     - prevent any error counter from being incremented

  That way the empty connection is silently ignored. Note that it is better
  not to use this unless it is clear that it is needed, because it will hide
  real problems. The most common reason for not receiving a request and seeing
  a 408 is due to an MTU inconsistency between the client and an intermediary
  element such as a VPN, which blocks too large packets. These issues are
  generally seen with POST requests as well as GET with large cookies. The logs
  are often the only way to detect them.

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also : "log", "dontlognull", "errorfile", and section 8 about logging.


option http-keep-alive
no option http-keep-alive
  Enable or disable HTTP keep-alive from client to server for HTTP/1.x
  connections

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments : none

  By default HAProxy operates in keep-alive mode with regards to persistent
  HTTP/1.x connections: for each connection it processes each request and
  response, and leaves the connection idle on both sides. This mode may be
  changed by several options such as "option http-server-close" or "option
  httpclose". This option allows to set back the keep-alive mode, which can be
  useful when another mode was used in a defaults section.

  Setting "option http-keep-alive" enables HTTP keep-alive mode on the client-
  and server- sides. This provides the lowest latency on the client side (slow
  network) and the fastest session reuse on the server side at the expense
  of maintaining idle connections to the servers. In general, it is possible
  with this option to achieve approximately twice the request rate that the
  "http-server-close" option achieves on small objects. There are mainly two
  situations where this option may be useful :

    - when the server is non-HTTP compliant and authenticates the connection
      instead of requests (e.g. NTLM authentication)

    - when the cost of establishing the connection to the server is significant
      compared to the cost of retrieving the associated object from the server.

  This last case can happen when the server is a fast static server of cache.

  At the moment, logs will not indicate whether requests came from the same
  session or not. The accept date reported in the logs corresponds to the end
  of the previous request, and the request time corresponds to the time spent
  waiting for a new request. The keep-alive request time is still bound to the
  timeout defined by "timeout http-keep-alive" or "timeout http-request" if
  not set.

  This option disables and replaces any previous "option httpclose" or "option
  http-server-close".

  See also : "option httpclose",, "option http-server-close",
             "option prefer-last-server" and "option http-pretend-keepalive".


option http-no-delay
no option http-no-delay
  Instruct the system to favor low interactive delays over performance in HTTP

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments : none

  In HTTP, each payload is unidirectional and has no notion of interactivity.
  Any agent is expected to queue data somewhat for a reasonably low delay.
  There are some very rare server-to-server applications that abuse the HTTP
  protocol and expect the payload phase to be highly interactive, with many
  interleaved data chunks in both directions within a single request. This is
  absolutely not supported by the HTTP specification and will not work across
  most proxies or servers. When such applications attempt to do this through
  HAProxy, it works but they will experience high delays due to the network
  optimizations which favor performance by instructing the system to wait for
  enough data to be available in order to only send full packets. Typical
  delays are around 200 ms per round trip. Note that this only happens with
  abnormal uses. Normal uses such as CONNECT requests nor WebSockets are not
  affected.

  When "option http-no-delay" is present in either the frontend or the backend
  used by a connection, all such optimizations will be disabled in order to
  make the exchanges as fast as possible. Of course this offers no guarantee on
  the functionality, as it may break at any other place. But if it works via
  HAProxy, it will work as fast as possible. This option should never be used
  by default, and should never be used at all unless such a buggy application
  is discovered. The impact of using this option is an increase of bandwidth
  usage and CPU usage, which may significantly lower performance in high
  latency environments.

  See also : "option http-buffer-request"


option http-pretend-keepalive
no option http-pretend-keepalive
  Define whether HAProxy will announce keepalive for HTTP/1.x connection to the
  server or not

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no   |   yes  |   yes

  Arguments : none

  When running with "option http-server-close" or "option httpclose", HAProxy
  adds a "Connection: close" header to the HTTP/1.x request forwarded to the
  server. Unfortunately, when some servers see this header, they automatically
  refrain from using the chunked encoding for responses of unknown length,
  while this is totally unrelated. The effect is that a client or a cache could
  receive an incomplete response without being aware of it, and consider the
  response complete.

  By setting "option http-pretend-keepalive", HAProxy will make the server
  believe it will keep the connection alive. The server will then not fall back
  to the abnormal undesired above. When HAProxy gets the whole response, it
  will close the connection with the server just as it would do with the
  "option httpclose". That way the client gets a normal response and the
  connection is correctly closed on the server side.

  It is recommended not to enable this option by default, because most servers
  will more efficiently close the connection themselves after the last packet,
  and release its buffers slightly earlier. Also, the added packet on the
  network could slightly reduce the overall peak performance. However it is
  worth noting that when this option is enabled, HAProxy will have slightly
  less work to do. So if HAProxy is the bottleneck on the whole architecture,
  enabling this option might save a few CPU cycles.

  This option may be set in backend and listen sections. Using it in a frontend
  section will be ignored and a warning will be reported during startup. It is
  a backend related option, so there is no real reason to set it on a
  frontend.

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also : "option httpclose", "option http-server-close", and
             "option http-keep-alive"

option http-restrict-req-hdr-names { preserve | delete | reject }
  Set HAProxy policy about HTTP request header names containing characters
  outside the "[a-zA-Z0-9-]" charset

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :
      preserve  disable the filtering. It is the default mode for HTTP proxies
                with no FastCGI application configured.

      delete    remove request headers with a name containing a character
                outside the "[a-zA-Z0-9-]" charset. It is the default mode for
                HTTP backends with a configured FastCGI application.

      reject    reject the request with a 403-Forbidden response if it contains a
                header name with a character outside the "[a-zA-Z0-9-]" charset.

  This option may be used to restrict the request header names to alphanumeric
  and hyphen characters ([A-Za-z0-9-]). This may be mandatory to interoperate
  with non-HTTP compliant servers that fail to handle some characters in header
  names. It may also be mandatory for FastCGI applications because all
  non-alphanumeric characters in header names are replaced by an underscore
  ('_'). Thus, it is easily possible to mix up header names and bypass some
  rules. For instance, "X-Forwarded-For" and "X_Forwarded-For" headers are both
  converted to "HTTP_X_FORWARDED_FOR" in FastCGI.

  Note this option is evaluated per proxy and after the http-request rules
  evaluation.

option http-server-close
no option http-server-close
  Enable or disable HTTP/1.x connection closing on the server side

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments : none

  By default HAProxy operates in keep-alive mode with regards to persistent
  HTTP/1.x connections: for each connection it processes each request and
  response, and leaves the connection idle on both sides. This mode may be
  changed by several options such as "option http-server-close" or "option
  httpclose". Setting "option http-server-close" enables HTTP connection-close
  mode on the server side while keeping the ability to support HTTP keep-alive
  and pipelining on the client side. This provides the lowest latency on the
  client side (slow network) and the fastest session reuse on the server side
  to save server resources, similarly to "option httpclose".  It also permits
  non-keepalive capable servers to be served in keep-alive mode to the clients
  if they conform to the requirements of RFC7230. Please note that some servers
  do not always conform to those requirements when they see "Connection: close"
  in the request. The effect will be that keep-alive will never be used. A
  workaround consists in enabling "option http-pretend-keepalive".

  At the moment, logs will not indicate whether requests came from the same
  session or not. The accept date reported in the logs corresponds to the end
  of the previous request, and the request time corresponds to the time spent
  waiting for a new request. The keep-alive request time is still bound to the
  timeout defined by "timeout http-keep-alive" or "timeout http-request" if
  not set.

  This option may be set both in a frontend and in a backend. It is enabled if
  at least one of the frontend or backend holding a connection has it enabled.
  It disables and replaces any previous "option httpclose" or "option
  http-keep-alive". Please check section 4 ("Proxies") to see how this option
  combines with others when frontend and backend options differ.

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also : "option httpclose", "option http-pretend-keepalive" and
             "option http-keep-alive".

option http-use-proxy-header
no option http-use-proxy-header
  Make use of non-standard Proxy-Connection header instead of Connection

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments : none

  While RFC7230 explicitly states that HTTP/1.1 agents must use the
  Connection header to indicate their wish of persistent or non-persistent
  connections, both browsers and proxies ignore this header for proxied
  connections and make use of the undocumented, non-standard Proxy-Connection
  header instead. The issue begins when trying to put a load balancer between
  browsers and such proxies, because there will be a difference between what
  HAProxy understands and what the client and the proxy agree on.

  By setting this option in a frontend, HAProxy can automatically switch to use
  that non-standard header if it sees proxied requests. A proxied request is
  defined here as one where the URI begins with neither a '/' nor a '*'. This
  is incompatible with the HTTP tunnel mode. Note that this option can only be
  specified in a frontend and will affect the request along its whole life.

  Also, when this option is set, a request which requires authentication will
  automatically switch to use proxy authentication headers if it is itself a
  proxied request. That makes it possible to check or enforce authentication in
  front of an existing proxy.

  This option should normally never be used, except in front of a proxy.

  See also : "option httpclose", and "option http-server-close".

option httpchk
option httpchk <uri>
option httpchk <method> <uri>
option httpchk <method> <uri> <version>
option httpchk <method> <uri> <version> <host>
  Enables HTTP protocol to check on the servers health

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <method>  is the optional HTTP method used with the requests. When not set,
              the "OPTIONS" method is used, as it generally requires low server
              processing and is easy to filter out from the logs. Any method
              may be used, though it is not recommended to invent non-standard
              ones.

    <uri>     is the URI referenced in the HTTP requests. It defaults to " / "
              which is accessible by default on almost any server, but may be
              changed to any other URI. Query strings are permitted.

    <version> is the optional HTTP version string. It defaults to "HTTP/1.0"
              but some servers might behave incorrectly in HTTP 1.0, so turning
              it to HTTP/1.1 may sometimes help. Note that the Host field is
              mandatory in HTTP/1.1.

    <host>    is the optional HTTP Host header value. It is not set by default.
              It is a log-format string.

  By default, server health checks only consist in trying to establish a TCP
  connection. When "option httpchk" is specified, a complete HTTP request is
  sent once the TCP connection is established, and responses 2xx and 3xx are
  considered valid, while all other ones indicate a server failure, including
  the lack of any response.

  Combined with "http-check" directives, it is possible to customize the
  request sent during the HTTP health checks or the matching rules on the
  response. It is also possible to configure a send/expect sequence, just like
  with the directive "tcp-check" for TCP health checks.

  The server configuration is used by default to open connections to perform
  HTTP health checks. By it is also possible to overwrite server parameters
  using "http-check connect" rules.

  "httpchk" option does not necessarily require an HTTP backend, it also works
  with plain TCP backends. This is particularly useful to check simple scripts
  bound to some dedicated ports using the inetd daemon. However, it will always
  internally relies on an HTX multiplexer. Thus, it means the request
  formatting and the response parsing will be strict.

  Examples :
        # Relay HTTPS traffic to Apache instance and check service availability
        # using HTTP request "OPTIONS * HTTP/1.1" on port 80.
        backend https_relay
            mode tcp
            option httpchk OPTIONS * HTTP/1.1
            http-check send hdr Host www
            server apache1 192.168.1.1:443 check port 80

  See also : "option ssl-hello-chk", "option smtpchk", "option mysql-check",
             "option pgsql-check", "http-check" and the "check", "port" and
             "inter" server options.


option httpclose
no option httpclose
  Enable or disable HTTP/1.x connection closing

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments : none

  By default HAProxy operates in keep-alive mode with regards to persistent
  HTTP/1.x connections: for each connection it processes each request and
  response, and leaves the connection idle on both sides. This mode may be
  changed by several options such as "option http-server-close" or "option
  httpclose".

  If "option httpclose" is set, HAProxy will close the client or the server
  connection, depending where the option is set. The frontend is considered for
  client connections while the backend is considered for server ones. If the
  option is set on a listener, it is applied both on client and server
  connections. It will check if a "Connection: close" header is already set in
  each direction, and will add one if missing.

  This option may also be combined with "option http-pretend-keepalive", which
  will disable sending of the "Connection: close" request header, but will
  still cause the connection to be closed once the whole response is received.

  It disables and replaces any previous "option http-server-close" or "option
  http-keep-alive".

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also : "option http-server-close".


option httplog [ clf ]
  Enable logging of HTTP request, stream state and timers

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments :
    clf       if the "clf" argument is added, then the output format will be
              the CLF format instead of HAProxy's default HTTP format. You can
              use this when you need to feed HAProxy's logs through a specific
              log analyzer which only support the CLF format and which is not
              extensible.

  By default, the log output format is very poor, as it only contains the
  source and destination addresses, and the instance name. By specifying
  "option httplog", each log line turns into a much richer format including,
  but not limited to, the HTTP request, the connection timers, the stream
  status, the connections numbers, the captured headers and cookies, the
  frontend, backend and server name, and of course the source address and
  ports.

  Specifying only "option httplog" will automatically clear the 'clf' mode
  if it was set by default.

  "option httplog" overrides any previous "log-format" directive.

  See also :  section 8 about logging.

option httpslog
  Enable logging of HTTPS request, stream state and timers

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  By default, the log output format is very poor, as it only contains the
  source and destination addresses, and the instance name. By specifying
  "option httpslog", each log line turns into a much richer format including,
  but not limited to, the HTTP request, the connection timers, the stream
  status, the connections numbers, the captured headers and cookies, the
  frontend, backend and server name, the SSL certificate verification and SSL
  handshake statuses, and of course the source address and ports.

  "option httpslog" overrides any previous "log-format" directive.

  See also :  section 8 about logging.


option independent-streams
no option independent-streams
  Enable or disable independent timeout processing for both directions

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |  yes

  Arguments : none

  By default, when data is sent over a socket, both the write timeout and the
  read timeout for that socket are refreshed, because we consider that there is
  activity on that socket, and we have no other means of guessing if we should
  receive data or not.

  While this default behavior is desirable for almost all applications, there
  exists a situation where it is desirable to disable it, and only refresh the
  read timeout if there are incoming data. This happens on streams with large
  timeouts and low amounts of exchanged data such as telnet session. If the
  server suddenly disappears, the output data accumulates in the system's
  socket buffers, both timeouts are correctly refreshed, and there is no way
  to know the server does not receive them, so we don't timeout. However, when
  the underlying protocol always echoes sent data, it would be enough by itself
  to detect the issue using the read timeout. Note that this problem does not
  happen with more verbose protocols because data won't accumulate long in the
  socket buffers.

  When this option is set on the frontend, it will disable read timeout updates
  on data sent to the client. There probably is little use of this case. When
  the option is set on the backend, it will disable read timeout updates on
  data sent to the server. Doing so will typically break large HTTP posts from
  slow lines, so use it with caution.

  See also : "timeout client", "timeout server" and "timeout tunnel"


option ldap-check
  Use LDAPv3 health checks for server testing

  May be used in the following contexts: tcp

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments : none

  It is possible to test that the server correctly talks LDAPv3 instead of just
  testing that it accepts the TCP connection. When this option is set, an
  LDAPv3 anonymous simple bind message is sent to the server, and the response
  is analyzed to find an LDAPv3 bind response message.

  The server is considered valid only when the LDAP response contains success
  resultCode (http://tools.ietf.org/html/rfc4511#section-4.1.9).

  Logging of bind requests is server dependent see your documentation how to
  configure it.

  Example :
        option ldap-check

  See also : "option httpchk"


option external-check
  Use external processes for server health checks

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  It is possible to test the health of a server using an external command.
  This is achieved by running the executable set using "external-check
  command".

  Requires the "external-check" global to be set.

  See also : "external-check", "external-check command", "external-check path"


option idle-close-on-response
no option idle-close-on-response
  Avoid closing idle frontend connections if a soft stop is in progress

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments : none

  By default, idle connections will be closed during a soft stop. In some
  environments, a client talking to the proxy may have prepared some idle
  connections in order to send requests later. If there is no proper retry on
  write errors, this can result in errors while haproxy is reloading. Even
  though a proper implementation should retry on connection/write errors, this
  option was introduced to support backwards compatibility with haproxy prior
  to version 2.4. Indeed before v2.4, haproxy used to wait for a last request
  and response to add a "connection: close" header before closing, thus
  notifying the client that the connection would not be reusable.

  In a real life example, this behavior was seen in AWS using the ALB in front
  of a haproxy. The end result was ALB sending 502 during haproxy reloads.

  Users are warned that using this option may increase the number of old
  processes if connections remain idle for too long. Adjusting the client
  timeouts and/or the "hard-stop-after" parameter accordingly might be
  needed in case of frequent reloads.

  See also: "timeout client", "timeout client-fin", "timeout http-request",
            "hard-stop-after"


option log-health-checks
no option log-health-checks
  Enable or disable logging of health checks status updates

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |  yes

  Arguments : none

  By default, failed health check are logged if server is UP and successful
  health checks are logged if server is DOWN, so the amount of additional
  information is limited.

  When this option is enabled, any change of the health check status or to
  the server's health will be logged, so that it becomes possible to know
  that a server was failing occasional checks before crashing, or exactly when
  it failed to respond a valid HTTP status, then when the port started to
  reject connections, then when the server stopped responding at all.

  Note that status changes not caused by health checks (e.g. enable/disable on
  the CLI) are intentionally not logged by this option.

  See also: "option httpchk", "option ldap-check", "option mysql-check",
            "option pgsql-check", "option redis-check", "option smtpchk",
            "option tcp-check", "log" and section 8 about logging.


option log-separate-errors
no option log-separate-errors
  Change log level for non-completely successful connections

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments : none

  Sometimes looking for errors in logs is not easy. This option makes HAProxy
  raise the level of logs containing potentially interesting information such
  as errors, timeouts, retries, redispatches, or HTTP status codes 5xx. The
  level changes from "info" to "err". This makes it possible to log them
  separately to a different file with most syslog daemons. Be careful not to
  remove them from the original file, otherwise you would lose ordering which
  provides very important information.

  Using this option, large sites dealing with several thousand connections per
  second may log normal traffic to a rotating buffer and only archive smaller
  error logs.

  See also : "log", "dontlognull", "dontlog-normal" and section 8 about
             logging.


option logasap
no option logasap
  Enable or disable early logging.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments : none

  By default, logs are emitted when all the log format aliases and sample
  fetches used in the definition of the log-format string return a value, or
  when the stream is terminated. This allows the built in log-format strings
  to account for the transfer time, or the number of bytes in log messages.

  When handling long lived connections such as large file transfers or RDP,
  it may take a while for the request or connection to appear in the logs.
  Using "option logasap", the log message is created as soon as the server
  connection is established in mode tcp, or as soon as the server sends the
  complete headers in mode http. Missing information in the logs will be the
  total number of bytes which will only indicate the amount of data transferred
  before the message was created and the total time which will not take the
  remainder of the connection life or transfer time into account. For the case
  of HTTP, it is good practice to capture the Content-Length response header
  so that the logs at least indicate how many bytes are expected to be
  transferred.

  Examples :
      listen http_proxy 0.0.0.0:80
          mode http
          option httplog
          option logasap
          log 192.168.2.200 local3

    >>> Feb  6 12:14:14 localhost \
          haproxy[14389]: 10.0.1.2:33317 [06/Feb/2009:12:14:14.655] http-in \
          static/srv1 9/10/7/14/+30 200 +243 - - ---- 3/1/1/1/0 1/0 \
          "GET /image.iso HTTP/1.0"

  See also : "option httplog", "capture response header", and section 8 about
             logging.


option mysql-check [ user <username> [ { post-41 | pre-41 } ] ]
  Use MySQL health checks for server testing

  May be used in the following contexts: tcp

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <username> This is the username which will be used when connecting to MySQL
               server.
    post-41    Send post v4.1 client compatible checks (the default)
    pre-41     Send pre v4.1 client compatible checks

  If you specify a username, the check consists of sending two MySQL packet,
  one Client Authentication packet, and one QUIT packet, to correctly close
  MySQL session. We then parse the MySQL Handshake Initialization packet and/or
  Error packet. It is a basic but useful test which does not produce error nor
  aborted connect on the server. However, it requires an unlocked authorised
  user without a password. To create a basic limited user in MySQL with
  optional resource limits:

      CREATE USER '<username>'@'<ip_of_haproxy|network_of_haproxy/netmask>'
      /*!50701 WITH MAX_QUERIES_PER_HOUR 1 MAX_UPDATES_PER_HOUR 0 */
      /*M!100201 MAX_STATEMENT_TIME 0.0001 */;

  If you don't specify a username (it is deprecated and not recommended), the
  check only consists in parsing the Mysql Handshake Initialization packet or
  Error packet, we don't send anything in this mode. It was reported that it
  can generate lockout if check is too frequent and/or if there is not enough
  traffic. In fact, you need in this case to check MySQL "max_connect_errors"
  value as if a connection is established successfully within fewer than MySQL
  "max_connect_errors" attempts after a previous connection was interrupted,
  the error count for the host is cleared to zero. If HAProxy's server get
  blocked, the "FLUSH HOSTS" statement is the only way to unblock it.

  Remember that this does not check database presence nor database consistency.
  To do this, you can use an external check with xinetd for example.

  The check requires MySQL >=3.22, for older version, please use TCP check.

  Most often, an incoming MySQL server needs to see the client's IP address for
  various purposes, including IP privilege matching and connection logging.
  When possible, it is often wise to masquerade the client's IP address when
  connecting to the server using the "usesrc" argument of the "source" keyword,
  which requires the transparent proxy feature to be compiled in, and the MySQL
  server to route the client via the machine hosting HAProxy.

  See also: "option httpchk"


option nolinger
no option nolinger
  Enable or disable immediate session resource cleaning after close

  May be used in the following contexts: tcp, http, log

  May be used in sections:    defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments : none

  When clients or servers abort connections in a dirty way (e.g. they are
  physically disconnected), the session timeouts triggers and the session is
  closed. But it will remain in FIN_WAIT1 state for some time in the system,
  using some resources and possibly limiting the ability to establish newer
  connections.

  When this happens, it is possible to activate "option nolinger" which forces
  the system to immediately remove any socket's pending data on close. Thus,
  a TCP RST is emitted, any pending data are truncated, and the session is
  instantly purged from the system's tables. The generally visible effect for
  a client is that responses are truncated if the close happens with a last
  block of data (e.g. on a redirect or error response). On the server side,
  it may help release the source ports immediately when forwarding a client
  aborts in tunnels. In both cases, TCP resets are emitted and given that
  the session is instantly destroyed, there will be no retransmit. On a lossy
  network this can increase problems, especially when there is a firewall on
  the lossy side, because the firewall might see and process the reset (hence
  purge its session) and block any further traffic for this session,, including
  retransmits from the other side. So if the other side doesn't receive it,
  it will never receive any RST again, and the firewall might log many blocked
  packets.

  For all these reasons, it is strongly recommended NOT to use this option,
  unless absolutely needed as a last resort. In most situations, using the
  "client-fin" or "server-fin" timeouts achieves similar results with a more
  reliable behavior. On Linux it's also possible to use the "tcp-ut" bind or
  server setting.

  This option may be used both on frontends and backends, depending on the side
  where it is required. Use it on the frontend for clients, and on the backend
  for servers. While this option is technically supported in "defaults"
  sections, it must really not be used there as it risks to accidentally
  propagate to sections that must no use it and to cause problems there.

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also: "timeout client-fin", "timeout server-fin", "tcp-ut" bind or server
            keywords.

option originalto [ except <network> ] [ header <name> ]
  Enable insertion of the X-Original-To header to requests sent to servers

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :
    <network> is an optional argument used to disable this option for sources
              matching <network>
    <name>    an optional argument to specify a different "X-Original-To"
              header name.

  Since HAProxy can work in transparent mode, every request from a client can
  be redirected to the proxy and HAProxy itself can proxy every request to a
  complex SQUID environment and the destination host from SO_ORIGINAL_DST will
  be lost. This is annoying when you want access rules based on destination ip
  addresses. To solve this problem, a new HTTP header "X-Original-To" may be
  added by HAProxy to all requests sent to the server. This header contains a
  value representing the original destination IP address. Since this must be
  configured to always use the last occurrence of this header only. Note that
  only the last occurrence of the header must be used, since it is really
  possible that the client has already brought one.

  The keyword "header" may be used to supply a different header name to replace
  the default "X-Original-To". This can be useful where you might already
  have a "X-Original-To" header from a different application, and you need
  preserve it. Also if your backend server doesn't use the "X-Original-To"
  header and requires different one.

  Sometimes, a same HAProxy instance may be shared between a direct client
  access and a reverse-proxy access (for instance when an SSL reverse-proxy is
  used to decrypt HTTPS traffic). It is possible to disable the addition of the
  header for a known destination address or network by adding the "except"
  keyword followed by the network address. In this case, any destination IP
  matching the network will not cause an addition of this header. Most common
  uses are with private networks or 127.0.0.1. IPv4 and IPv6 are both
  supported.

  This option may be specified either in the frontend or in the backend. If at
  least one of them uses it, the header will be added. Note that the backend's
  setting of the header subargument takes precedence over the frontend's if
  both are defined.

  Examples :
    # Original Destination address
    frontend www
        mode http
        option originalto except 127.0.0.1

    # Those servers want the IP Address in X-Client-Dst
    backend www
        mode http
        option originalto header X-Client-Dst

  See also : "option httpclose", "option http-server-close".


option persist
no option persist
  Enable or disable forced persistence on down servers

  May be used in the following contexts: tcp, http

  May be used in sections:    defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments : none

  When an HTTP request reaches a backend with a cookie which references a dead
  server, by default it is redispatched to another server. It is possible to
  force the request to be sent to the dead server first using "option persist"
  if absolutely needed. A common use case is when servers are under extreme
  load and spend their time flapping. In this case, the users would still be
  directed to the server they opened the session on, in the hope they would be
  correctly served. It is recommended to use "option redispatch" in conjunction
  with this option so that in the event it would not be possible to connect to
  the server at all (server definitely dead), the client would finally be
  redirected to another valid server.

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also : "option redispatch", "retries", "force-persist"


option pgsql-check user <username>
  Use PostgreSQL health checks for server testing

  May be used in the following contexts: tcp

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <username> This is the username which will be used when connecting to
               PostgreSQL server.

  The check sends a PostgreSQL StartupMessage and waits for either
  Authentication request or ErrorResponse message. It is a basic but useful
  test which does not produce error nor aborted connect on the server.
  This check is identical with the "mysql-check".

  See also: "option httpchk"


option prefer-last-server
no option prefer-last-server
  Allow multiple load balanced requests to remain on the same server

  May be used in the following contexts: tcp, http

  May be used in sections:    defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments : none

  When the load balancing algorithm in use is not deterministic, and a previous
  request was sent to a server to which HAProxy still holds a connection, it is
  sometimes desirable that subsequent requests on a same session go to the same
  server as much as possible. Note that this is different from persistence, as
  we only indicate a preference which HAProxy tries to apply without any form
  of warranty. The real use is for keep-alive connections sent to servers. When
  this option is used, HAProxy will try to reuse the same connection that is
  attached to the server instead of rebalancing to another server, causing a
  close of the connection. This can make sense for static file servers. It does
  not make much sense to use this in combination with hashing algorithms. Note,
  HAProxy already automatically tries to stick to a server which sends a 401 or
  to a proxy which sends a 407 (authentication required), when the load
  balancing algorithm is not deterministic. This is mandatory for use with the
  broken NTLM authentication challenge, and significantly helps in
  troubleshooting some faulty applications. Option prefer-last-server might be
  desirable in these environments as well, to avoid redistributing the traffic
  after every other response.

  It may be useful to precise here, which load balancing algorithms are
  considered deterministic. Deterministic algorithms will always select the same
  server for a given client data, assuming the set of available servers has not
  changed. In general, deterministic algorithms involve hasing or lookups on the
  incoming requests to choose the target server. However, this is not always the
  case; "static-rr", for example, can be also considered as deterministic because
  the server choice is based on the server's static weight, making the selection
  predictable. "sticky" algorithm provides deterministic routing for the
  returning clients.

  As for non-deterministic algorithms, these algorithms select a server based on
  dynamic server state or simple rotation, so two consecutive requests are not
  guaranteed to land on the same server. option prefer-last-server is designed
  specifically for these. roundrobin, leastconn are examples of such algorithms.

  If this option has been enabled in a "defaults" section, it can be
  disabled in a specific instance by prepending the "no" keyword before it.

  See also: "option http-keep-alive"


option redispatch
option redispatch <interval>
no option redispatch
  Enable or disable session redistribution in case of connection failure

  May be used in the following contexts: tcp, http

  May be used in sections:    defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <interval> The optional integer value that controls how often redispatches
               occur when retrying connections. Positive value P indicates a
               redispatch is desired on every Pth retry, and negative value
               N indicate a redispatch is desired on the Nth retry prior to the
               last retry. For example, the default of -1 preserves the
               historical behavior of redispatching on the last retry, a
               positive value of 1 would indicate a redispatch on every retry,
               and a positive value of 3 would indicate a redispatch on every
               third retry. You can disable redispatches with a value of 0.


  In HTTP mode, if a server designated by a cookie is down, clients may
  definitely stick to it, for example when using "option persist" or
  "force-persist", because they cannot flush the cookie, so they will not
  be able to access the service anymore.

  Specifying "option redispatch" will allow the proxy to break cookie or
  consistent hash based persistence and redistribute them to a working server.

  Active servers are selected from a subset of the list of available
  servers. Active servers that are not down or in maintenance (i.e., whose
  health is not checked or that have been checked as "up"), are selected in the
  following order:

    1. Any active, non-backup server, if any, or,

    2. If the "allbackups" option is not set, the first backup server in the
       list, or

    3. If the "allbackups" option is set, any backup server.

  When a retry occurs, HAProxy tries to select another server than the last
  one. The new server is selected from the current list of servers.

  Sometimes, if the list is updated between retries (e.g., if numerous retries
  occur and last longer than the time needed to check that a server is down,
  remove it from the list and fall back on the list of backup servers),
  connections may be redirected to a backup server, though.

  It also allows to retry connections to another server in case of multiple
  connection failures. Of course, it requires having "retries" set to a nonzero
  value.

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also : "option persist", "force-persist", "retries"


option redis-check
  Use redis health checks for server testing

  May be used in the following contexts: tcp

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments : none

  It is possible to test that the server correctly talks REDIS protocol instead
  of just testing that it accepts the TCP connection. When this option is set,
  a PING redis command is sent to the server, and the response is analyzed to
  find the "+PONG" response message.

  Example :
        option redis-check

  See also : "option httpchk", "option tcp-check", "tcp-check expect"


option smtpchk
option smtpchk <hello> <domain>
  Use SMTP health checks for server testing

  May be used in the following contexts: tcp

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <hello>   is an optional argument. It is the "hello" command to use. It can
              be either "HELO" (for SMTP) or "EHLO" (for ESMTP). All other
              values will be turned into the default command ("HELO").

    <domain>  is the domain name to present to the server. It may only be
              specified (and is mandatory) if the hello command has been
              specified. By default, "localhost" is used.

  When "option smtpchk" is set, the health checks will consist in TCP
  connections followed by an SMTP command. By default, this command is
  "HELO localhost". The server's return code is analyzed and only return codes
  starting with a "2" will be considered as valid. All other responses,
  including a lack of response will constitute an error and will indicate a
  dead server.

  This test is meant to be used with SMTP servers or relays. Depending on the
  request, it is possible that some servers do not log each connection attempt,
  so you may want to experiment to improve the behavior. Using telnet on port
  25 is often easier than adjusting the configuration.

  Most often, an incoming SMTP server needs to see the client's IP address for
  various purposes, including spam filtering, anti-spoofing and logging. When
  possible, it is often wise to masquerade the client's IP address when
  connecting to the server using the "usesrc" argument of the "source" keyword,
  which requires the transparent proxy feature to be compiled in.

  Example :
        option smtpchk HELO mydomain.org

  See also : "option httpchk", "source"


option socket-stats
no option socket-stats

  Enable or disable collecting & providing separate statistics for each socket.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments : none


option splice-auto
no option splice-auto
  Enable or disable automatic kernel acceleration on sockets in both directions

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments : none

  When this option is enabled either on a frontend or on a backend, HAProxy
  will automatically evaluate the opportunity to use kernel tcp splicing to
  forward data between the client and the server, in either direction. HAProxy
  uses heuristics to estimate if kernel splicing might improve performance or
  not. Both directions are handled independently. Note that the heuristics used
  are not much aggressive in order to limit excessive use of splicing. This
  option requires splicing to be enabled at compile time, and may be globally
  disabled with the global option "nosplice". Since splice uses pipes, using it
  requires that there are enough spare pipes.

  Important note: kernel-based TCP splicing is a Linux-specific feature which
  first appeared in kernel 2.6.25. It offers kernel-based acceleration to
  transfer data between sockets without copying these data to user-space, thus
  providing noticeable performance gains and CPU cycles savings. Since many
  early implementations are buggy, corrupt data and/or are inefficient, this
  feature is not enabled by default, and it should be used with extreme care.
  While it is not possible to detect the correctness of an implementation,
  2.6.29 is the first version offering a properly working implementation. In
  case of doubt, splicing may be globally disabled using the global "nosplice"
  keyword.

  Example :
        option splice-auto

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also : "option splice-request", "option splice-response", and global
             options "nosplice" and "maxpipes"


option splice-request
no option splice-request
  Enable or disable automatic kernel acceleration on sockets for requests

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments : none

  When this option is enabled either on a frontend or on a backend, HAProxy
  will use kernel tcp splicing whenever possible to forward data going from
  the client to the server. It might still use the recv/send scheme if there
  are no spare pipes left. This option requires splicing to be enabled at
  compile time, and may be globally disabled with the global option "nosplice".
  Since splice uses pipes, using it requires that there are enough spare pipes.

  Important note: see "option splice-auto" for usage limitations.

  Example :
        option splice-request

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also : "option splice-auto", "option splice-response", and global options
             "nosplice" and "maxpipes"


option splice-response
no option splice-response
  Enable or disable automatic kernel acceleration on sockets for responses

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments : none

  When this option is enabled either on a frontend or on a backend, HAProxy
  will use kernel tcp splicing whenever possible to forward data going from
  the server to the client. It might still use the recv/send scheme if there
  are no spare pipes left. This option requires splicing to be enabled at
  compile time, and may be globally disabled with the global option "nosplice".
  Since splice uses pipes, using it requires that there are enough spare pipes.

  Important note: see "option splice-auto" for usage limitations.

  Example :
        option splice-response

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also : "option splice-auto", "option splice-request", and global options
             "nosplice" and "maxpipes"


option spop-check
  Use SPOP health checks for server testing

  May be used in the following contexts: tcp

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments : none

  It is possible to test that the server correctly talks SPOP protocol instead
  of just testing that it accepts the TCP connection. When this option is set,
  a HELLO handshake is performed between HAProxy and the server, and the
  response is analyzed to check no error is reported.

  Example :
        option spop-check

  See also : "option httpchk"


option srvtcpka
no option srvtcpka
  Enable or disable the sending of TCP keepalive packets on the server side

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments : none

  When there is a firewall or any session-aware component between a client and
  a server, and when the protocol involves very long sessions with long idle
  periods (e.g. remote desktops), there is a risk that one of the intermediate
  components decides to expire a session which has remained idle for too long.

  Enabling socket-level TCP keep-alives makes the system regularly send packets
  to the other end of the connection, leaving it active. The delay between
  keep-alive probes is controlled by the system only and depends both on the
  operating system and its tuning parameters.

  It is important to understand that keep-alive packets are neither emitted nor
  received at the application level. It is only the network stacks which sees
  them. For this reason, even if one side of the proxy already uses keep-alives
  to maintain its connection alive, those keep-alive packets will not be
  forwarded to the other side of the proxy.

  Please note that this has nothing to do with HTTP keep-alive.

  Using option "srvtcpka" enables the emission of TCP keep-alive probes on the
  server side of a connection, which should help when session expirations are
  noticed between HAProxy and a server.

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also : "option clitcpka", "option tcpka"


option ssl-hello-chk
  Use SSLv3 client hello health checks for server testing

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments : none

  When some SSL-based protocols are relayed in TCP mode through HAProxy, it is
  possible to test that the server correctly talks SSL instead of just testing
  that it accepts the TCP connection. When "option ssl-hello-chk" is set, pure
  SSLv3 client hello messages are sent once the connection is established to
  the server, and the response is analyzed to find an SSL server hello message.
  The server is considered valid only when the response contains this server
  hello message.

  All servers tested till there correctly reply to SSLv3 client hello messages,
  and most servers tested do not even log the requests containing only hello
  messages, which is appreciable.

  Note that this check works even when SSL support was not built into HAProxy
  because it forges the SSL message. When SSL support is available, it is best
  to use native SSL health checks instead of this one.

  See also: "option httpchk", "check-ssl"


option tcp-check
  Perform health checks using tcp-check send/expect sequences

  May be used in the following contexts: tcp, http, log

  May be used in sections:   defaults | frontend | listen | backend
                               yes    |    no    |   yes  |   yes

  This health check method is intended to be combined with "tcp-check" command
  lists in order to support send/expect types of health check sequences.

  TCP checks currently support 4 modes of operations :
    - no "tcp-check" directive : the health check only consists in a connection
      attempt, which remains the default mode.

    - "tcp-check send" or "tcp-check send-binary" only is mentioned : this is
      used to send a string along with a connection opening. With some
      protocols, it helps sending a "QUIT" message for example that prevents
      the server from logging a connection error for each health check. The
      check result will still be based on the ability to open the connection
      only.

    - "tcp-check expect" only is mentioned : this is used to test a banner.
      The connection is opened and HAProxy waits for the server to present some
      contents which must validate some rules. The check result will be based
      on the matching between the contents and the rules. This is suited for
      POP, IMAP, SMTP, FTP, SSH, TELNET.

    - both "tcp-check send" and "tcp-check expect" are mentioned : this is
      used to test a hello-type protocol. HAProxy sends a message, the server
      responds and its response is analyzed. the check result will be based on
      the matching between the response contents and the rules. This is often
      suited for protocols which require a binding or a request/response model.
      LDAP, MySQL, Redis and SSL are example of such protocols, though they
      already all have their dedicated checks with a deeper understanding of
      the respective protocols.
      In this mode, many questions may be sent and many answers may be
      analyzed.

  A fifth mode can be used to insert comments in different steps of the script.

  For each tcp-check rule you create, you can add a "comment" directive,
  followed by a string. This string will be reported in the log and stderr in
  debug mode. It is useful to make user-friendly error reporting.  The
  "comment" is of course optional.

  During the execution of a health check, a variable scope is made available to
  store data samples, using the "tcp-check set-var" operation. Freeing those
  variable is possible using "tcp-check unset-var".


  Examples :
         # perform a POP check (analyze only server's banner)
         option tcp-check
         tcp-check expect string +OK\ POP3\ ready comment POP\ protocol

         # perform an IMAP check (analyze only server's banner)
         option tcp-check
         tcp-check expect string *\ OK\ IMAP4\ ready comment IMAP\ protocol

         # look for the redis master server after ensuring it speaks well
         # redis protocol, then it exits properly.
         # (send a command then analyze the response 3 times)
         option tcp-check
         tcp-check comment PING\ phase
         tcp-check send PING\r\n
         tcp-check expect string +PONG
         tcp-check comment role\ check
         tcp-check send info\ replication\r\n
         tcp-check expect string role:master
         tcp-check comment QUIT\ phase
         tcp-check send QUIT\r\n
         tcp-check expect string +OK

         forge a HTTP request, then analyze the response
         (send many headers before analyzing)
         option tcp-check
         tcp-check comment forge\ and\ send\ HTTP\ request
         tcp-check send HEAD\ /\ HTTP/1.1\r\n
         tcp-check send Host:\ www.mydomain.com\r\n
         tcp-check send User-Agent:\ HAProxy\ tcpcheck\r\n
         tcp-check send \r\n
         tcp-check expect rstring HTTP/1\..\ (2..|3..) comment check\ HTTP\ response


  See also : "tcp-check connect", "tcp-check expect" and "tcp-check send".


option tcp-smart-accept
no option tcp-smart-accept
  Enable or disable the saving of one ACK packet during the accept sequence

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |    no

  Arguments : none

  When an HTTP connection request comes in, the system acknowledges it on
  behalf of HAProxy, then the client immediately sends its request, and the
  system acknowledges it too while it is notifying HAProxy about the new
  connection. HAProxy then reads the request and responds. This means that we
  have one TCP ACK sent by the system for nothing, because the request could
  very well be acknowledged by HAProxy when it sends its response.

  For this reason, in HTTP mode, HAProxy automatically asks the system to avoid
  sending this useless ACK on platforms which support it (currently at least
  Linux). It must not cause any problem, because the system will send it anyway
  after 40 ms if the response takes more time than expected to come.

  During complex network debugging sessions, it may be desirable to disable
  this optimization because delayed ACKs can make troubleshooting more complex
  when trying to identify where packets are delayed. It is then possible to
  fall back to normal behavior by specifying "no option tcp-smart-accept".

  It is also possible to force it for non-HTTP proxies by simply specifying
  "option tcp-smart-accept". For instance, it can make sense with some services
  such as SMTP where the server speaks first.

  It is recommended to avoid forcing this option in a defaults section. In case
  of doubt, consider setting it back to automatic values by prepending the
  "default" keyword before it, or disabling it using the "no" keyword.

  See also : "option tcp-smart-connect"


option tcp-smart-connect
no option tcp-smart-connect
  Enable or disable the saving of one ACK packet during the connect sequence

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments : none

  On certain systems (at least Linux), HAProxy can ask the kernel not to
  immediately send an empty ACK upon a connection request, but to directly
  send the buffer request instead. This saves one packet on the network and
  thus boosts performance. It can also be useful for some servers, because they
  immediately get the request along with the incoming connection.

  This feature is enabled when "option tcp-smart-connect" is set in a backend.
  It is not enabled by default because it makes network troubleshooting more
  complex.

  It only makes sense to enable it with protocols where the client speaks first
  such as HTTP. In other situations, if there is no data to send in place of
  the ACK, a normal ACK is sent.

  If this option has been enabled in a "defaults" section, it can be disabled
  in a specific instance by prepending the "no" keyword before it.

  See also : "option tcp-smart-accept"


option tcpka
  Enable or disable the sending of TCP keepalive packets on both sides

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments : none

  When there is a firewall or any session-aware component between a client and
  a server, and when the protocol involves very long sessions with long idle
  periods (e.g. remote desktops), there is a risk that one of the intermediate
  components decides to expire a session which has remained idle for too long.

  Enabling socket-level TCP keep-alives makes the system regularly send packets
  to the other end of the connection, leaving it active. The delay between
  keep-alive probes is controlled by the system only and depends both on the
  operating system and its tuning parameters.

  It is important to understand that keep-alive packets are neither emitted nor
  received at the application level. It is only the network stacks which sees
  them. For this reason, even if one side of the proxy already uses keep-alives
  to maintain its connection alive, those keep-alive packets will not be
  forwarded to the other side of the proxy.

  Please note that this has nothing to do with HTTP keep-alive.

  Using option "tcpka" enables the emission of TCP keep-alive probes on both
  the client and server sides of a connection. Note that this is meaningful
  only in "defaults" or "listen" sections. If this option is used in a
  frontend, only the client side will get keep-alives, and if this option is
  used in a backend, only the server side will get keep-alives. For this
  reason, it is strongly recommended to explicitly use "option clitcpka" and
  "option srvtcpka" when the configuration is split between frontends and
  backends.

  See also : "option clitcpka", "option srvtcpka"


option tcplog [clf]
  Enable advanced logging of TCP connections with stream state and timers

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments :
    clf       if the "clf" argument is added, then the output format will be
              the CLF format instead of HAProxy's default TCP format. You can
              use this when you need to feed HAProxy's logs through a specific
              log analyzer which only support the CLF format and which is not
              extensible.  Since this expects an HTTP format some of the
              values have been pre set. The http request will show as TCP and
              the response code will show as 000.

  By default, the log output format is very poor, as it only contains the
  source and destination addresses, and the instance name. By specifying
  "option tcplog", each log line turns into a much richer format including, but
  not limited to, the connection timers, the stream status, the connections
  numbers, the frontend, backend and server name, and of course the source
  address and ports. This option is useful for pure TCP proxies in order to
  find which of the client or server disconnects or times out. For normal HTTP
  proxies, it's better to use "option httplog" which is even more complete.

  "option tcplog" overrides any previous "log-format" directive.

  See also :  "option httplog", and section 8 about logging.


option transparent
no option transparent
  Enable client-side transparent proxying

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments : none

  This option was introduced in order to provide layer 7 persistence to layer 3
  load balancers. The idea is to use the OS's ability to redirect an incoming
  connection for a remote address to a local process (here HAProxy), and let
  this process know what address was initially requested. When this option is
  used, sessions without cookies will be forwarded to the original destination
  IP address of the incoming request (which should match that of another
  equipment), while requests with cookies will still be forwarded to the
  appropriate server.

  Note that contrary to a common belief, this option does NOT make HAProxy
  present the client's IP to the server when establishing the connection.

  See also: the "usesrc" argument of the "source" keyword, and the
            "transparent" option of the "bind" keyword.


external-check command <command>
  Executable to run when performing an external-check

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <command> is the external command to run

  The arguments passed to the to the command are:

  <proxy_address> <proxy_port> <server_address> <server_port>

  The <proxy_address> and <proxy_port> are derived from the first listener
  that is either IPv4, IPv6 or a UNIX socket. In the case of a UNIX socket
  listener the proxy_address will be the path of the socket and the
  <proxy_port> will be the string "NOT_USED". In a backend section, it's not
  possible to determine a listener, and both <proxy_address> and <proxy_port>
  will have the string value "NOT_USED".

  Some values are also provided through environment variables.

  Environment variables :
    HAPROXY_PROXY_ADDR      The first bind address if available (or empty if not
                            applicable, for example in a "backend" section).

    HAPROXY_PROXY_ID        The backend id.

    HAPROXY_PROXY_NAME      The backend name.

    HAPROXY_PROXY_PORT      The first bind port if available (or empty if not
                            applicable, for example in a "backend" section or
                            for a UNIX socket).

    HAPROXY_SERVER_ADDR     The server address.

    HAPROXY_SERVER_CURCONN  The current number of connections on the server.

    HAPROXY_SERVER_ID       The server id.

    HAPROXY_SERVER_MAXCONN  The server max connections.

    HAPROXY_SERVER_NAME     The server name.

    HAPROXY_SERVER_PORT     The server port if available (or empty for a UNIX
                            socket).

    HAPROXY_SERVER_SSL      "0" when SSL is not used, "1" when it is used

    HAPROXY_SERVER_PROTO    The protocol used by this server, which can be one
                            of "cli" (the haproxy CLI), "syslog" (syslog TCP
                            server), "peers" (peers TCP server), "h1" (HTTP/1.x
                            server), "h2" (HTTP/2 server), or "tcp" (any other
                            TCP server).

    PATH                    The PATH environment variable used when executing
                            the command may be set using "external-check path".

  If the command executed and exits with a zero status then the check is
  considered to have passed, otherwise the check is considered to have
  failed.

  Example :
        external-check command /bin/true

  See also : "external-check", "option external-check", "external-check path"


external-check path <path>
  The value of the PATH environment variable used when running an external-check

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <path> is the path used when executing external command to run

  The default path is "".

  Example :
        external-check path "/usr/bin:/bin"

  See also : "external-check", "option external-check",
             "external-check command"


persist rdp-cookie
persist rdp-cookie(<name>)
  Enable RDP cookie-based persistence

  May be used in the following contexts: tcp

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <name>    is the optional name of the RDP cookie to check. If omitted, the
              default cookie name "msts" will be used. There currently is no
              valid reason to change this name.

  This statement enables persistence based on an RDP cookie. The RDP cookie
  contains all information required to find the server in the list of known
  servers. So when this option is set in the backend, the request is analyzed
  and if an RDP cookie is found, it is decoded. If it matches a known server
  which is still UP (or if "option persist" is set), then the connection is
  forwarded to this server.

  Note that this only makes sense in a TCP backend, but for this to work, the
  frontend must have waited long enough to ensure that an RDP cookie is present
  in the request buffer. This is the same requirement as with the "rdp-cookie"
  load-balancing method. Thus it is highly recommended to put all statements in
  a single "listen" section.

  Also, it is important to understand that the terminal server will emit this
  RDP cookie only if it is configured for "token redirection mode", which means
  that the "IP address redirection" option is disabled.

  Example :
        listen tse-farm
            bind :3389
            # wait up to 5s for an RDP cookie in the request
            tcp-request inspect-delay 5s
            tcp-request content accept if RDP_COOKIE
            # apply RDP cookie persistence
            persist rdp-cookie
            # if server is unknown, let's balance on the same cookie.
            # alternatively, "balance leastconn" may be useful too.
            balance rdp-cookie
            server srv1 1.1.1.1:3389
            server srv2 1.1.1.2:3389

  See also : "balance rdp-cookie", "tcp-request" and the "req.rdp_cookie" ACL.


quic-initial <action> [ { if | unless } <condition> ]
  Perform an action on an incoming QUIC Initial packet. Contrary to
  "tcp-request connection", this is executed prior to any connection element
  instantiation and starting and completion of the SSL handshake, which is more
  efficient when wanting to reject connections attempts.

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                yes(!) |    yes   |   yes  |   no

  Arguments :
    <action>    defines the action to perform if the condition applies. See
                below.

    <condition> is a standard layer4-only ACL-based condition (see section 7).
                However, QUIC initial rules are executed too early even for
                some layer4 sample fetch methods despite no configuration
                warning and may result in unspecified runtime behavior,
                although they will not crash. Consider that only internal
                samples and layer4 "src*" and "dst*" are considered as
                supported for now.


  This action is executed early during QUIC packet parsing. As such, only a
  minimal list of actions is supported :
    - accept
    - dgram-drop
    - reject
    - send-retry


rate-limit sessions <rate>
  Set a limit on the number of new sessions accepted per second on a frontend

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments :
    <rate>    The <rate> parameter is an integer designating the maximum number
              of new sessions per second to accept on the frontend.

  When the frontend reaches the specified number of new sessions per second, it
  stops accepting new connections until the rate drops below the limit again.
  During this time, the pending sessions will be kept in the socket's backlog
  (in system buffers) and HAProxy will not even be aware that sessions are
  pending. When applying very low limit on a highly loaded service, it may make
  sense to increase the socket's backlog using the "backlog" keyword.

  This feature is particularly efficient at blocking connection-based attacks
  or service abuse on fragile servers. Since the session rate is measured every
  millisecond, it is extremely accurate. Also, the limit applies immediately,
  no delay is needed at all to detect the threshold.

  Example : limit the connection rate on SMTP to 10 per second max
        listen smtp
            mode tcp
            bind :25
            rate-limit sessions 10
            server smtp1 127.0.0.1:1025

  Note : when the maximum rate is reached, the frontend's status is not changed
         but its sockets appear as "WAITING" in the statistics if the
         "socket-stats" option is enabled.

  See also : the "backlog" keyword and the "fe_sess_rate" ACL criterion.


redirect location <loc> [code <code>] <option> [{if | unless} <condition>]
redirect prefix   <pfx> [code <code>] <option> [{if | unless} <condition>]
redirect scheme   <sch> [code <code>] <option> [{if | unless} <condition>]
  Return an HTTP redirection if/unless a condition is matched

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 no    |    yes   |   yes  |   yes

  If/unless the condition is matched, the HTTP request will lead to a redirect
  response. If no condition is specified, the redirect applies unconditionally.

  Arguments :
    <loc>     With "redirect location", the exact value in <loc> is placed into
              the HTTP "Location" header. When used in an "http-request" rule,
              <loc> value follows the Custom log format rules and can include
              some dynamic values (see Custom log format in section 8.2.6).

    <pfx>     With "redirect prefix", the "Location" header is built from the
              concatenation of <pfx> and the complete URI path, including the
              query string, unless the "drop-query" option is specified (see
              below). As a special case, if <pfx> equals exactly "/", then
              nothing is inserted before the original URI. It allows one to
              redirect to the same URL (for instance, to insert a cookie). When
              used in an "http-request" rule, <pfx> value follows the Custom
              Log Format rules and can include some dynamic values (see Custom
              Log Format in section 8.2.6).

    <sch>     With "redirect scheme", then the "Location" header is built by
              concatenating <sch> with "://" then the first occurrence of the
              "Host" header, and then the URI path, including the query string
              unless the "drop-query" option is specified (see below). If no
              path is found or if the path is "*", then "/" is used instead. If
              no "Host" header is found, then an empty host component will be
              returned, which most recent browsers interpret as redirecting to
              the same host. This directive is mostly used to redirect HTTP to
              HTTPS. When used in an "http-request" rule, <sch> value follows
              the Custom log format rules and can include some dynamic values
              (see Custom log format in section 8.2.6).

    <code>    The code is optional. It indicates which type of HTTP redirection
              is desired. Only codes 301, 302, 303, 307 and 308 are supported,
              with 302 used by default if no code is specified. 301 means
              "Moved permanently", and a browser may cache the Location. 302
              means "Moved temporarily" and means that the browser should not
              cache the redirection. 303 is equivalent to 302 except that the
              browser will fetch the location with a GET method. 307 is just
              like 302 but makes it clear that the same method must be reused.
              Likewise, 308 replaces 301 if the same method must be used.

    <option>  There are several options which can be specified to adjust the
              expected behavior of a redirection :

      - "drop-query"
        When this keyword is used in a prefix-based redirection, then the
        location will be set without any possible query-string, which is useful
        for directing users to a non-secure page for instance. It has no effect
        with a location-type redirect.

      - "append-slash"
        This keyword may be used in conjunction with "drop-query" to redirect
        users who use a URL not ending with a '/' to the same one with the '/'.
        It can be useful to ensure that search engines will only see one URL.
        For this, a return code 301 is preferred.

      - "ignore-empty"
        This keyword only has effect when a location is produced using a log
        format expression (i.e. when used in http-request or http-response).
        It indicates that if the result of the expression is empty, the rule
        should silently be skipped. The main use is to allow mass-redirects
        of known paths using a simple map.

      - "set-cookie NAME[=value]"
        A "Set-Cookie" header will be added with NAME (and optionally "=value")
        to the response. This is sometimes used to indicate that a user has
        been seen, for instance to protect against some types of DoS. No other
        cookie option is added, so the cookie will be a session cookie. Note
        that for a browser, a sole cookie name without an equal sign is
        different from a cookie with an equal sign.

      - "set-cookie-fmt <fmt>"
        It is equivaliant to the option above, except the "Set-Cookie" header
        will be filled with the result of the log-format string <fmt>
        evaluation. Be careful to respect the "NAME[=value]" format because no
        special check are performed during the configuration parsing.

      - "clear-cookie NAME[=]"
        A "Set-Cookie" header will be added with NAME (and optionally "="), but
        with the "Max-Age" attribute set to zero. This will tell the browser to
        delete this cookie. It is useful for instance on logout pages. It is
        important to note that clearing the cookie "NAME" will not remove a
        cookie set with "NAME=value". You have to clear the cookie "NAME=" for
        that, because the browser makes the difference.

      - "keep-query"
        When this keyword is used in a location-based redirection, then the
        query-string of the original URI, if any, will be appended to the
        location. If no query-string is found, nothing is added. If the
        location already contains a query-string, the original one will be
        appended with the '&' delimiter.


  Example: move the login URL only to HTTPS.
        acl clear      dst_port  80
        acl secure     dst_port  8080
        acl login_page url_beg   /login
        acl logout     url_beg   /logout
        acl uid_given  url_reg   /login?userid=[^&]+
        acl cookie_set hdr_sub(cookie) SEEN=1

        redirect prefix   https://mysite.com set-cookie SEEN=1 if !cookie_set
        redirect prefix   https://mysite.com           if login_page !secure
        redirect prefix   http://mysite.com drop-query if login_page !uid_given
        redirect location http://mysite.com/           if !login_page secure
        redirect location / clear-cookie USERID=       if logout

  Example: send redirects for request for articles without a '/'.
        acl missing_slash path_reg ^/article/[^/]*$
        redirect code 301 prefix / drop-query append-slash if missing_slash

  Example: redirect all HTTP traffic to HTTPS when SSL is handled by HAProxy.
        redirect scheme https if !{ ssl_fc }

  Example: append 'www.' prefix in front of all hosts not having it
        http-request redirect code 301 location      \
          http://www.%[hdr(host)]%[capture.req.uri]  \
          unless { hdr_beg(host) -i www }

  Example: permanently redirect only old URLs to new ones
        http-request redirect code 301 location               \
          %[path,map_str(old-blog-articles.map)] ignore-empty

  See section 7 about ACL usage.


retries <value>
  Set the number of retries to perform on a server after a failure

  May be used in the following contexts: tcp, http

  May be used in sections:    defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <value>   is the number of times a request or connection attempt should be
              retried on a server after a failure.

  By default, retries apply only to new connection attempts. However, when
  the "retry-on" directive is used, other conditions might trigger a retry
  (e.g. empty response, undesired status code), and each of them will count
  one attempt, and when the total number attempts reaches the value here, an
  error will be returned.

  In order to avoid immediate reconnections to a server which is restarting,
  a turn-around timer of min("timeout connect", one second) is applied before
  a retry occurs on the same server.

  When "option redispatch" is set, some retries may be performed on another
  server even if a cookie references a different server. By default this will
  only be the last retry unless an argument is passed to "option redispatch".

  See also : "option redispatch"


retry-on [space-delimited list of keywords]
  Specify when to attempt to automatically retry a failed request.
  This setting is only valid when "mode" is set to http and is silently ignored
  otherwise.

  May be used in the following contexts: tcp, http

  May be used in sections:    defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <keywords>  is a space-delimited list of keywords or HTTP status codes, each
                representing a type of failure event on which an attempt to
                retry the request is desired. Please read the notes at the
                bottom before changing this setting. The following keywords are
                supported :

      none              never retry

      conn-failure      retry when the connection or the SSL handshake failed
                        and the request could not be sent. This is the default.

      empty-response    retry when the server connection was closed after part
                        of the request was sent, and nothing was received from
                        the server. This type of failure may be caused by the
                        request timeout on the server side, poor network
                        condition, or a server crash or restart while
                        processing the request.

      junk-response     retry when the server returned something not looking
                        like a complete HTTP response. This includes partial
                        responses headers as well as non-HTTP contents. It
                        usually is a bad idea to retry on such events, which
                        may be caused a configuration issue (wrong server port)
                        or by the request being harmful to the server (buffer
                        overflow attack for example).

      response-timeout  the server timeout stroke while waiting for the server
                        to respond to the request. This may be caused by poor
                        network condition, the reuse of an idle connection
                        which has expired on the path, or by the request being
                        extremely expensive to process. It generally is a bad
                        idea to retry on such events on servers dealing with
                        heavy database processing (full scans, etc) as it may
                        amplify denial of service attacks.

      0rtt-rejected     retry requests which were sent over early data and were
                        rejected by the server. These requests are generally
                        considered to be safe to retry.

      <status>          any HTTP status code among "401" (Unauthorized), "403"
                        (Forbidden), "404" (Not Found), "408" (Request Timeout),
			"421" (Misdirected Request), "425" (Too Early),
			"429" (Too Many Requests), "500" (Server Error),
			"501" (Not Implemented), "502" (Bad Gateway),
			"503" (Service Unavailable), "504" (Gateway Timeout).

      all-retryable-errors
                        retry request for any error that are considered
                        retryable. This currently activates "conn-failure",
                        "empty-response", "junk-response", "response-timeout",
                        "0rtt-rejected", "500", "502", "503", and "504".

  Using this directive replaces any previous settings with the new ones; it is
  not cumulative.

  Please note that using anything other than "none" and "conn-failure" requires
  to allocate a buffer and copy the whole request into it, so it has memory and
  performance impacts. Requests not fitting in a single buffer will never be
  retried (see the global tune.bufsize setting).

  You have to make sure the application has a replay protection mechanism built
  in such as a unique transaction IDs passed in requests, or that replaying the
  same request has no consequence, or it is very dangerous to use any retry-on
  value beside "conn-failure" and "none". Static file servers and caches are
  generally considered safe against any type of retry. Using a status code can
  be useful to quickly leave a server showing an abnormal behavior (out of
  memory, file system issues, etc), but in this case it may be a good idea to
  immediately redispatch the connection to another server (please see "option
  redispatch" for this). Last, it is important to understand that most causes
  of failures are the requests themselves and that retrying a request causing a
  server to misbehave will often make the situation even worse for this server,
  or for the whole service in case of redispatch.

  Unless you know exactly how the application deals with replayed requests, you
  should not use this directive.

  The default is "conn-failure".

  Example:
    retry-on 503 504

  See also: "retries", "option redispatch", "tune.bufsize"

server <name> <address>[:[port]] [param*]
  Declare a server in a backend

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 no    |    no    |   yes  |   yes

  Arguments :
    <name>    is the internal name assigned to this server. This name will
              appear in logs and alerts. If "http-send-name-header" is
              set, it will be added to the request header sent to the server.

    <address> is the IPv4 or IPv6 address of the server. Alternatively, a
              resolvable hostname is supported, but this name will be resolved
              during start-up. Address "0.0.0.0" or "*" has a special meaning.
              It indicates that the connection will be forwarded to the same IP
              address as the one from the client connection. This is useful in
              transparent proxy architectures where the client's connection is
              intercepted and HAProxy must forward to the original destination
              address. This is more or less what the "transparent" keyword does
              except that with a server it's possible to limit concurrency and
              to report statistics. Optionally, an address family prefix may be
              used before the address to force the family regardless of the
              address format, which can be useful to specify a path to a unix
              socket with no slash ('/'). Currently supported prefixes are :
                    - 'ipv4@'  -> address is always IPv4
                    - 'ipv6@'  -> address is always IPv6
                    - 'unix@'  -> address is a path to a local unix socket
                    - 'abns@'  -> address is in abstract namespace (Linux only)
                    - 'abnsz@'  -> address is in abstract namespace (Linux only)
                       but it is explicitly zero-terminated. This means no \0
                       padding is used to complete sun_path. It is useful to
                       interconnect with programs that don't implement the
                       default abns naming logic that haproxy uses.
                    - 'sockpair@' -> address is the FD of a connected unix
                      socket or of a socketpair. During a connection, the
                      backend creates a pair of connected sockets, and passes
                      one of them over the FD. The bind part will use the
                      received socket as the client FD. Should be used
                      carefully.
                    - 'rhttp@' [ EXPERIMENTAL ] -> custom address family for a
                      passive server in HTTP reverse context. This is an
                      experimental features which requires
                      "expose-experimental-directives" on a line before this
                      server.
              You may want to reference some environment variables in the
              address parameter, see section 2.3 about environment
              variables. The "init-addr" setting can be used to modify the way
              IP addresses should be resolved upon startup.

    <port>    is an optional port specification. If set, all connections will
              be sent to this port. If unset, the same port the client
              connected to will be used. The port may also be prefixed by a "+"
              or a "-". In this case, the server's port will be determined by
              adding this value to the client's port.

    <param*>  is a list of parameters for this server. The "server" keywords
              accepts an important number of options and has a complete section
              dedicated to it. Please refer to section 5 for more details.

  Examples :
        server first  10.1.1.1:1080 cookie first  check inter 1000
        server second 10.1.1.2:1080 cookie second check inter 1000
        server transp ipv4@
        server backup "${SRV_BACKUP}:1080" backup
        server www1_dc1 "${LAN_DC1}.101:80"
        server www1_dc2 "${LAN_DC2}.101:80"

  Note: regarding Linux's abstract namespace sockets, "abns" HAProxy sockets
        uses the whole sun_path length is used for the address length. Some
        other programs such as socat use the string length only by default.
        Pass the option ",unix-tightsocklen=0" to any abstract socket
        definition in socat to make it compatible with HAProxy's, or use the
        "abnsz" HAProxy socket family instead.

  See also: "default-server", "http-send-name-header" and section 5 about
             server options

server-state-file-name [ { use-backend-name | <file> } ]
  Set the server state file to read, load and apply to servers available in
  this backend.

  May be used in the following contexts: tcp, http, log

  May be used in sections:    defaults | frontend | listen | backend
                                  no   |    no   |   yes  |   yes

  It only applies when the directive "load-server-state-from-file" is set to
  "local". When <file> is not provided, if "use-backend-name" is used or if
  this directive is not set, then backend name is used. If <file> starts with a
  slash '/', then it is considered as an absolute path. Otherwise, <file> is
  concatenated to the global directive "server-state-base".

  Example: the minimal configuration below would make HAProxy look for the
           state server file '/etc/haproxy/states/bk':

    global
      server-state-file-base /etc/haproxy/states

    backend bk
      load-server-state-from-file

  See also: "server-state-base", "load-server-state-from-file", and
  "show servers state"

server-template <prefix> <num | range> <fqdn>[:<port>] [params*]
  Set a template to initialize servers with shared parameters.
  The names of these servers are built from <prefix> and <num | range> parameters.

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 no    |    no    |   yes  |   yes

  Arguments:
    <prefix>  A prefix for the server names to be built.

    <num | range>
              If <num> is provided, this template initializes <num> servers
              with 1 up to <num> as server name suffixes. A range of numbers
              <num_low>-<num_high> may also be used to use <num_low> up to
              <num_high> as server name suffixes.

    <fqdn>    A FQDN for all the servers this template initializes.

    <port>    Same meaning as "server" <port> argument (see "server" keyword).

    <params*>
              Remaining server parameters among all those supported by "server"
              keyword.

  Examples:
    # Initializes 3 servers with srv1, srv2 and srv3 as names,
    # google.com as FQDN, and health-check enabled.
    server-template srv 1-3 google.com:80 check

    # or
    server-template srv 3 google.com:80 check

    # would be equivalent to:
    server srv1 google.com:80 check
    server srv2 google.com:80 check
    server srv3 google.com:80 check



source <addr>[:<port>] [usesrc { <addr2>[:<port2>] | client | clientip } ]
source <addr>[:<port>] [usesrc { <addr2>[:<port2>] | hdr_ip(<hdr>[,<occ>]) } ]
source <addr>[:<port>] [interface <name>]
  Set the source address for outgoing connections

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <addr>    is the IPv4 address HAProxy will bind to before connecting to a
              server. This address is also used as a source for health checks.

              The default value of 0.0.0.0 means that the system will select
              the most appropriate address to reach its destination. Optionally
              an address family prefix may be used before the address to force
              the family regardless of the address format, which can be useful
              to specify a path to a unix socket with no slash ('/'). Currently
              supported prefixes are :
                - 'ipv4@' -> address is always IPv4
                - 'ipv6@' -> address is always IPv6
                - 'unix@' -> address is a path to a local unix socket
                - 'abns@' -> address is in abstract namespace (Linux only)
                - 'abnsz@'  -> address is in zero-terminated abstract namespace
                               (Linux only)

              You may want to reference some environment variables in the
              address parameter, see section 2.3 about environment variables.

    <port>    is an optional port. It is normally not needed but may be useful
              in some very specific contexts. The default value of zero means
              the system will select a free port. Note that port ranges are not
              supported in the backend. If you want to force port ranges, you
              have to specify them on each "server" line.

    <addr2>   is the IP address to present to the server when connections are
              forwarded in full transparent proxy mode. This is currently only
              supported on some patched Linux kernels. When this address is
              specified, clients connecting to the server will be presented
              with this address, while health checks will still use the address
              <addr>.

    <port2>   is the optional port to present to the server when connections
              are forwarded in full transparent proxy mode (see <addr2> above).
              The default value of zero means the system will select a free
              port.

    <hdr>     is the name of a HTTP header in which to fetch the IP to bind to.
              This is the name of a comma-separated header list which can
              contain multiple IP addresses. By default, the last occurrence is
              used. This is designed to work with the X-Forwarded-For header
              and to automatically bind to the client's IP address as seen
              by previous proxy, typically Stunnel. In order to use another
              occurrence from the last one, please see the <occ> parameter
              below. When the header (or occurrence) is not found, no binding
              is performed so that the proxy's default IP address is used. Also
              keep in mind that the header name is case insensitive, as for any
              HTTP header.

    <occ>     is the occurrence number of a value to be used in a multi-value
              header. This is to be used in conjunction with "hdr_ip(<hdr>)",
              in order to specify which occurrence to use for the source IP
              address. Positive values indicate a position from the first
              occurrence, 1 being the first one. Negative values indicate
              positions relative to the last one, -1 being the last one. This
              is helpful for situations where an X-Forwarded-For header is set
              at the entry point of an infrastructure and must be used several
              proxy layers away. When this value is not specified, -1 is
              assumed. Passing a zero here disables the feature.

    <name>    is an optional interface name to which to bind to for outgoing
              traffic. On systems supporting this features (currently, only
              Linux), this allows one to bind all traffic to the server to
              this interface even if it is not the one the system would select
              based on routing tables. This should be used with extreme care.
              Note that using this option requires root privileges.

  The "source" keyword is useful in complex environments where a specific
  address only is allowed to connect to the servers. It may be needed when a
  private address must be used through a public gateway for instance, and it is
  known that the system cannot determine the adequate source address by itself.

  An extension which is available on certain patched Linux kernels may be used
  through the "usesrc" optional keyword. It makes it possible to connect to the
  servers with an IP address which does not belong to the system itself. This
  is called "full transparent proxy mode". For this to work, the destination
  servers have to route their traffic back to this address through the machine
  running HAProxy, and IP forwarding must generally be enabled on this machine.

  In this "full transparent proxy" mode, it is possible to force a specific IP
  address to be presented to the servers. This is not much used in fact. A more
  common use is to tell HAProxy to present the client's IP address. For this,
  there are two methods :

    - present the client's IP and port addresses. This is the most transparent
      mode, but it can cause problems when IP connection tracking is enabled on
      the machine, because a same connection may be seen twice with different
      states. However, this solution presents the huge advantage of not
      limiting the system to the 64k outgoing address+port couples, because all
      of the client ranges may be used.

    - present only the client's IP address and select a spare port. This
      solution is still quite elegant but slightly less transparent (downstream
      firewalls logs will not match upstream's). It also presents the downside
      of limiting the number of concurrent connections to the usual 64k ports.
      However, since the upstream and downstream ports are different, local IP
      connection tracking on the machine will not be upset by the reuse of the
      same session.

  This option sets the default source for all servers in the backend. It may
  also be specified in a "defaults" section. Finer source address specification
  is possible at the server level using the "source" server option. Refer to
  section 5 for more information.

  In order to work, "usesrc" requires root privileges, or on supported systems,
  the "cap_net_raw" capability. See also the "setcap" global directive.

  Examples :
        backend private
            # Connect to the servers using our 192.168.1.200 source address
            source 192.168.1.200

        backend transparent_ssl1
            # Connect to the SSL farm from the client's source address
            source 192.168.1.200 usesrc clientip

        backend transparent_ssl2
            # Connect to the SSL farm from the client's source address and port
            # not recommended if IP conntrack is present on the local machine.
            source 192.168.1.200 usesrc client

        backend transparent_ssl3
            # Connect to the SSL farm from the client's source address. It
            # is more conntrack-friendly.
            source 192.168.1.200 usesrc clientip

        backend transparent_smtp
            # Connect to the SMTP farm from the client's source address/port
            # with Tproxy version 4.
            source 0.0.0.0 usesrc clientip

        backend transparent_http
            # Connect to the servers using the client's IP as seen by previous
            # proxy.
            source 0.0.0.0 usesrc hdr_ip(x-forwarded-for,-1)

  See also : the "source" server option in section 5, the Tproxy patches for
             the Linux kernel on www.balabit.com, the "bind" keyword.


srvtcpka-cnt <count>
  Sets the maximum number of keepalive probes TCP should send before dropping
  the connection on the server side.

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <count>   is the maximum number of keepalive probes.

  This keyword corresponds to the socket option TCP_KEEPCNT. If this keyword
  is not specified, system-wide TCP parameter (tcp_keepalive_probes) is used.
  The availability of this setting depends on the operating system. It is
  known to work on Linux.

  See also : "option srvtcpka", "srvtcpka-idle", "srvtcpka-intvl".


srvtcpka-idle <timeout>
  Sets the time the connection needs to remain idle before TCP starts sending
  keepalive probes, if enabled the sending of TCP keepalive packets on the
  server side.

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <timeout> is the time the connection needs to remain idle before TCP starts
              sending keepalive probes. It is specified in seconds by default,
              but can be in any other unit if the number is suffixed by the
              unit, as explained at the top of this document.

  This keyword corresponds to the socket option TCP_KEEPIDLE. If this keyword
  is not specified, system-wide TCP parameter (tcp_keepalive_time) is used.
  The availability of this setting depends on the operating system. It is
  known to work on Linux.

  See also : "option srvtcpka", "srvtcpka-cnt", "srvtcpka-intvl".


srvtcpka-intvl <timeout>
  Sets the time between individual keepalive probes on the server side.

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <timeout> is the time between individual keepalive probes. It is specified
              in seconds by default, but can be in any other unit if the number
              is suffixed by the unit, as explained at the top of this
              document.

  This keyword corresponds to the socket option TCP_KEEPINTVL. If this keyword
  is not specified, system-wide TCP parameter (tcp_keepalive_intvl) is used.
  The availability of this setting depends on the operating system. It is
  known to work on Linux.

  See also : "option srvtcpka", "srvtcpka-cnt", "srvtcpka-idle".


stats admin { if | unless } <cond>
  Enable statistics admin level if/unless a condition is matched

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 no    |    yes   |   yes  |   yes

  This statement enables the statistics admin level if/unless a condition is
  matched.

  The admin level allows to enable/disable servers from the web interface. By
  default, statistics page is read-only for security reasons.

  Currently, the POST request is limited to the buffer size minus the reserved
  buffer space, which means that if the list of servers is too long, the
  request won't be processed. It is recommended to alter few servers at a
  time.

  Example :
    # statistics admin level only for localhost
    backend stats_localhost
        stats enable
        stats admin if LOCALHOST

  Example :
    # statistics admin level always enabled because of the authentication
    backend stats_auth
        stats enable
        stats auth  admin:AdMiN123
        stats admin if TRUE

  Example :
    # statistics admin level depends on the authenticated user
    userlist stats-auth
        group admin    users admin
        user  admin    insecure-password 'AdMiN123'
        group readonly users haproxy
        user  haproxy  insecure-password 'haproxy'

    backend stats_auth
        stats enable
        acl AUTH       http_auth(stats-auth)
        acl AUTH_ADMIN http_auth_group(stats-auth) admin
        stats http-request auth unless AUTH
        stats admin if AUTH_ADMIN

  See also : "stats enable", "stats auth", "stats http-request", section 12.2
             about userlists and section 7 about ACL usage.

ssl-f-use [<sslbindconf> ...]*
  Assignate a certificate to the current frontend.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 no    |    yes   |   yes  |   no

  Arguments :
    <sslbindconf> supports the following keywords from the bind line
    (see Section 5.1. Bind options):

    - allow-0rtt
    - alpn
    - ca-file
    - ca-verify-file
    - ciphers
    - ciphersuites
    - client-sigalgs
    - crl-file
    - curves
    - ecdhe
    - no-alpn
    - no-ca-names
    - npn
    - sigalgs
    - ssl-min-ver
    - ssl-max-ver
    - verify

    sslbindconf also supports the following keywords from the crt-store load
    keyword (see Section 12.7.1. Load options):

    - crt
    - key
    - ocsp
    - issuer
    - sctl
    - ocsp-update

  Assignate a certificate <crtname> to a crt-list created automatically with the
  frontend name and prefixed by @ (ex: '@frontend1').

  This implicit crt-list will be assigned to every "ssl" bind lines in the
  current frontend.

  crt-list commands from the stats socket are effective with this crt-list, so
  one could replace, remove or add certificates and SSL options to it.

  Example :

    frontend https
        bind :443 ssl
        bind quic4@:443 ssl
        ssl-f-use crt foobar.pem.rsa sigalgs "RSA-PSS+SHA256"
        ssl-f-use crt test.foobar.pem
        ssl-f-use crt test2.foobar.crt key test2.foobar.key ocsp test2.foobar.ocsp ocsp-update on

  See also : "crt-list" and "crt".

stats auth <user>:<passwd>
  Enable statistics with authentication and grant access to an account

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :
    <user>    is a user name to grant access to

    <passwd>  is the cleartext password associated to this user

  This statement enables statistics with default settings, and restricts access
  to declared users only. It may be repeated as many times as necessary to
  allow as many users as desired. When a user tries to access the statistics
  without a valid account, a "401 Forbidden" response will be returned so that
  the browser asks the user to provide a valid user and password. The real
  which will be returned to the browser is configurable using "stats realm".

  Since the authentication method is HTTP Basic Authentication, the passwords
  circulate in cleartext on the network. Thus, it was decided that the
  configuration file would also use cleartext passwords to remind the users
  that those ones should not be sensitive and not shared with any other account.

  It is also possible to reduce the scope of the proxies which appear in the
  report using "stats scope".

  Though this statement alone is enough to enable statistics reporting, it is
  recommended to set all other settings in order to avoid relying on default
  unobvious parameters.

  Example :
    # public access (limited to this backend only)
    backend public_www
        server srv1 192.168.0.1:80
        stats enable
        stats hide-version
        stats scope   .
        stats uri     /admin?stats
        stats realm   HAProxy\ Statistics
        stats auth    admin1:AdMiN123
        stats auth    admin2:AdMiN321

    # internal monitoring access (unlimited)
    backend private_monitoring
        stats enable
        stats uri     /admin?stats
        stats refresh 5s

  See also : "stats enable", "stats realm", "stats scope", "stats uri"


stats enable
  Enable statistics reporting with default settings

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments : none

  This statement enables statistics reporting with default settings defined
  at build time. Unless stated otherwise, these settings are used :
    - stats uri   : /haproxy?stats
    - stats realm : "HAProxy Statistics"
    - stats auth  : no authentication
    - stats scope : no restriction

  Though this statement alone is enough to enable statistics reporting, it is
  recommended to set all other settings in order to avoid relying on default
  unobvious parameters.

  Example :
    # public access (limited to this backend only)
    backend public_www
        server srv1 192.168.0.1:80
        stats enable
        stats hide-version
        stats scope   .
        stats uri     /admin?stats
        stats realm   HAProxy\ Statistics
        stats auth    admin1:AdMiN123
        stats auth    admin2:AdMiN321

    # internal monitoring access (unlimited)
    backend private_monitoring
        stats enable
        stats uri     /admin?stats
        stats refresh 5s

  See also : "stats auth", "stats realm", "stats uri"


stats hide-version
  Enable statistics and hide HAProxy version reporting

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments : none

  By default, the stats page reports some useful status information along with
  the statistics. Among them is HAProxy's version. However, it is generally
  considered dangerous to report precise version to anyone, as it can help them
  target known weaknesses with specific attacks. The "stats hide-version"
  statement removes the version from the statistics report. This is recommended
  for public sites or any site with a weak login/password.

  Though this statement alone is enough to enable statistics reporting, it is
  recommended to set all other settings in order to avoid relying on default
  unobvious parameters.

  Example :
    # public access (limited to this backend only)
    backend public_www
        server srv1 192.168.0.1:80
        stats enable
        stats hide-version
        stats scope   .
        stats uri     /admin?stats
        stats realm   HAProxy\ Statistics
        stats auth    admin1:AdMiN123
        stats auth    admin2:AdMiN321

    # internal monitoring access (unlimited)
    backend private_monitoring
        stats enable
        stats uri     /admin?stats
        stats refresh 5s

  See also : "stats auth", "stats enable", "stats realm", "stats uri"


stats http-request { allow | deny | auth [realm <realm>] }
             [ { if | unless } <condition> ]
  Access control for statistics

  May be used in the following contexts: http

  May be used in sections:   defaults | frontend | listen | backend
                                no    |    no    |   yes  |   yes

  As "http-request", these set of options allow to fine control access to
  statistics. Each option may be followed by if/unless and acl.
  First option with matched condition (or option without condition) is final.
  For "deny" a 403 error will be returned, for "allow" normal processing is
  performed, for "auth" a 401/407 error code is returned so the client
  should be asked to enter a username and password.

  There is no fixed limit to the number of http-request statements per
  instance.

  See also : "http-request", section 12.2 about userlists and section 7
             about ACL usage.


stats realm <realm>
  Enable statistics and set authentication realm

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :
    <realm>   is the name of the HTTP Basic Authentication realm reported to
              the browser. The browser uses it to display it in the pop-up
              inviting the user to enter a valid username and password.

  The realm is read as a single word, so any spaces in it should be escaped
  using a backslash ('\').

  This statement is useful only in conjunction with "stats auth" since it is
  only related to authentication.

  Though this statement alone is enough to enable statistics reporting, it is
  recommended to set all other settings in order to avoid relying on default
  unobvious parameters.

  Example :
    # public access (limited to this backend only)
    backend public_www
        server srv1 192.168.0.1:80
        stats enable
        stats hide-version
        stats scope   .
        stats uri     /admin?stats
        stats realm   HAProxy\ Statistics
        stats auth    admin1:AdMiN123
        stats auth    admin2:AdMiN321

    # internal monitoring access (unlimited)
    backend private_monitoring
        stats enable
        stats uri     /admin?stats
        stats refresh 5s

  See also : "stats auth", "stats enable", "stats uri"


stats refresh <delay>
  Enable statistics with automatic refresh

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :
    <delay>   is the suggested refresh delay, specified in seconds, which will
              be returned to the browser consulting the report page. While the
              browser is free to apply any delay, it will generally respect it
              and refresh the page this every seconds. The refresh interval may
              be specified in any other non-default time unit, by suffixing the
              unit after the value, as explained at the top of this document.

  This statement is useful on monitoring displays with a permanent page
  reporting the load balancer's activity. When set, the HTML report page will
  include a link "refresh"/"stop refresh" so that the user can select whether
  they want automatic refresh of the page or not.

  Though this statement alone is enough to enable statistics reporting, it is
  recommended to set all other settings in order to avoid relying on default
  unobvious parameters.

  Example :
    # public access (limited to this backend only)
    backend public_www
        server srv1 192.168.0.1:80
        stats enable
        stats hide-version
        stats scope   .
        stats uri     /admin?stats
        stats realm   HAProxy\ Statistics
        stats auth    admin1:AdMiN123
        stats auth    admin2:AdMiN321

    # internal monitoring access (unlimited)
    backend private_monitoring
        stats enable
        stats uri     /admin?stats
        stats refresh 5s

  See also : "stats auth", "stats enable", "stats realm", "stats uri"


stats scope { <name> | "." }
  Enable statistics and limit access scope

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :
    <name>    is the name of a listen, frontend or backend section to be
              reported. The special name "." (a single dot) designates the
              section in which the statement appears.

  When this statement is specified, only the sections enumerated with this
  statement will appear in the report. All other ones will be hidden. This
  statement may appear as many times as needed if multiple sections need to be
  reported. Please note that the name checking is performed as simple string
  comparisons, and that it is never checked that a give section name really
  exists.

  Though this statement alone is enough to enable statistics reporting, it is
  recommended to set all other settings in order to avoid relying on default
  unobvious parameters.

  Example :
    # public access (limited to this backend only)
    backend public_www
        server srv1 192.168.0.1:80
        stats enable
        stats hide-version
        stats scope   .
        stats uri     /admin?stats
        stats realm   HAProxy\ Statistics
        stats auth    admin1:AdMiN123
        stats auth    admin2:AdMiN321

    # internal monitoring access (unlimited)
    backend private_monitoring
        stats enable
        stats uri     /admin?stats
        stats refresh 5s

  See also : "stats auth", "stats enable", "stats realm", "stats uri"


stats show-desc [ <desc> ]
  Enable reporting of a description on the statistics page.

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

    <desc>    is an optional description to be reported. If unspecified, the
              description from global section is automatically used instead.

  This statement is useful for users that offer shared services to their
  customers, where node or description should be different for each customer.

  Though this statement alone is enough to enable statistics reporting, it is
  recommended to set all other settings in order to avoid relying on default
  unobvious parameters. By default description is not shown.

  Example :
    # internal monitoring access (unlimited)
    backend private_monitoring
        stats enable
        stats show-desc Master node for Europe, Asia, Africa
        stats uri       /admin?stats
        stats refresh   5s

  See also: "show-node", "stats enable", "stats uri" and "description" in
            global section.


stats show-legends
  Enable reporting additional information on the statistics page

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments : none

  Enable reporting additional information on the statistics page :
    - cap: capabilities (proxy)
    - mode: one of tcp, http or health (proxy)
    - id: SNMP ID (proxy, socket, server)
    - IP (socket, server)
    - cookie (backend, server)

  Though this statement alone is enough to enable statistics reporting, it is
  recommended to set all other settings in order to avoid relying on default
  unobvious parameters. Default behavior is not to show this information.

  See also: "stats enable", "stats uri".


stats show-modules
  Enable display of extra statistics module on the statistics page

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments : none

  New columns are added at the end of the line containing the extra statistics
  values as a tooltip.

  Though this statement alone is enough to enable statistics reporting, it is
  recommended to set all other settings in order to avoid relying on default
  unobvious parameters. Default behavior is not to show this information.

  See also: "stats enable", "stats uri".


stats show-node [ <name> ]
  Enable reporting of a host name on the statistics page.

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments:
    <name>    is an optional name to be reported. If unspecified, the
              node name from global section is automatically used instead.

  This statement is useful for users that offer shared services to their
  customers, where node or description might be different on a stats page
  provided for each customer. Default behavior is not to show host name.

  Though this statement alone is enough to enable statistics reporting, it is
  recommended to set all other settings in order to avoid relying on default
  unobvious parameters.

  Example:
    # internal monitoring access (unlimited)
    backend private_monitoring
        stats enable
        stats show-node Europe-1
        stats uri       /admin?stats
        stats refresh   5s

  See also: "show-desc", "stats enable", "stats uri", and "node" in global
            section.


stats uri <prefix>
  Enable statistics and define the URI prefix to access them

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :
    <prefix>  is the prefix of any URI which will be redirected to stats. This
              prefix may contain a question mark ('?') to indicate part of a
              query string.

  The statistics URI is intercepted on the relayed traffic, so it appears as a
  page within the normal application. It is strongly advised to ensure that the
  selected URI will never appear in the application, otherwise it will never be
  possible to reach it in the application.

  The default URI compiled in HAProxy is "/haproxy?stats", but this may be
  changed at build time, so it's better to always explicitly specify it here.
  It is generally a good idea to include a question mark in the URI so that
  intermediate proxies refrain from caching the results. Also, since any string
  beginning with the prefix will be accepted as a stats request, the question
  mark helps ensuring that no valid URI will begin with the same words.

  It is sometimes very convenient to use "/" as the URI prefix, and put that
  statement in a "listen" instance of its own. That makes it easy to dedicate
  an address or a port to statistics only.

  Though this statement alone is enough to enable statistics reporting, it is
  recommended to set all other settings in order to avoid relying on default
  unobvious parameters.

  Example :
    # public access (limited to this backend only)
    backend public_www
        server srv1 192.168.0.1:80
        stats enable
        stats hide-version
        stats scope   .
        stats uri     /admin?stats
        stats realm   HAProxy\ Statistics
        stats auth    admin1:AdMiN123
        stats auth    admin2:AdMiN321

    # internal monitoring access (unlimited)
    backend private_monitoring
        stats enable
        stats uri     /admin?stats
        stats refresh 5s

  See also : "stats auth", "stats enable", "stats realm"


stick match <pattern> [table <table>] [{if | unless} <cond>]
  Define a request pattern matching condition to stick a user to a server

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 no    |    no    |   yes  |   yes

  Arguments :
    <pattern>  is a sample expression rule as described in section 7.3. It
               describes what elements of the incoming request or connection
               will be analyzed in the hope to find a matching entry in a
               stickiness table. This rule is mandatory.

    <table>    is an optional stickiness table name. If unspecified, the same
               backend's table is used. A stickiness table is declared using
               the "stick-table" statement.

    <cond>     is an optional matching condition. It makes it possible to match
               on a certain criterion only when other conditions are met (or
               not met). For instance, it could be used to match on a source IP
               address except when a request passes through a known proxy, in
               which case we'd match on a header containing that IP address.

  Some protocols or applications require complex stickiness rules and cannot
  always simply rely on cookies nor hashing. The "stick match" statement
  describes a rule to extract the stickiness criterion from an incoming request
  or connection. See section 7 for a complete list of possible patterns and
  transformation rules.

  The table has to be declared using the "stick-table" statement. It must be of
  a type compatible with the pattern. By default it is the one which is present
  in the same backend. It is possible to share a table with other backends by
  referencing it using the "table" keyword. If another table is referenced,
  the server's ID inside the backends are used. By default, all server IDs
  start at 1 in each backend, so the server ordering is enough. But in case of
  doubt, it is highly recommended to force server IDs using their "id" setting.

  It is possible to restrict the conditions where a "stick match" statement
  will apply, using "if" or "unless" followed by a condition. See section 7 for
  ACL based conditions.

  There is no limit on the number of "stick match" statements. The first that
  applies and matches will cause the request to be directed to the same server
  as was used for the request which created the entry. That way, multiple
  matches can be used as fallbacks.

  The stick rules are checked after the persistence cookies, so they will not
  affect stickiness if a cookie has already been used to select a server. That
  way, it becomes very easy to insert cookies and match on IP addresses in
  order to maintain stickiness between HTTP and HTTPS.

  Example :
    # forward SMTP users to the same server they just used for POP in the
    # last 30 minutes
    backend pop
        mode tcp
        balance roundrobin
        stick store-request src
        stick-table type ip size 200k expire 30m
        server s1 192.168.1.1:110
        server s2 192.168.1.1:110

    backend smtp
        mode tcp
        balance roundrobin
        stick match src table pop
        server s1 192.168.1.1:25
        server s2 192.168.1.1:25

  See also : "stick-table", "stick on", section 11 about stick-tables, and
             section 7 about ACLs and samples fetching.


stick on <pattern> [table <table>] [{if | unless} <condition>]
  Define a request pattern to associate a user to a server

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 no    |    no    |   yes  |   yes

  Note : This form is exactly equivalent to "stick match" followed by
         "stick store-request", all with the same arguments. Please refer
         to both keywords for details. It is only provided as a convenience
         for writing more maintainable configurations.

  Examples :
    # The following form ...
    stick on src table pop if !localhost

    # ...is strictly equivalent to this one :
    stick match src table pop if !localhost
    stick store-request src table pop if !localhost


    # Use cookie persistence for HTTP, and stick on source address for HTTPS as
    # well as HTTP without cookie. Share the same table between both accesses.
    backend http
        mode http
        balance roundrobin
        stick on src table https
        cookie SRV insert indirect nocache
        server s1 192.168.1.1:80 cookie s1
        server s2 192.168.1.1:80 cookie s2

    backend https
        mode tcp
        balance roundrobin
        stick-table type ip size 200k expire 30m
        stick on src
        server s1 192.168.1.1:443
        server s2 192.168.1.1:443

  See also : "stick match", "stick store-request", and section 11 about
             stick-tables.


stick store-request <pattern> [table <table>] [{if | unless} <condition>]
  Define a request pattern used to create an entry in a stickiness table

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 no    |    no    |   yes  |   yes

  Arguments :
    <pattern>  is a sample expression rule as described in section 7.3. It
               describes what elements of the incoming request or connection
               will be analyzed, extracted and stored in the table once a
               server is selected.

    <table>    is an optional stickiness table name. If unspecified, the same
               backend's table is used. A stickiness table is declared using
               the "stick-table" statement.

    <cond>     is an optional storage condition. It makes it possible to store
               certain criteria only when some conditions are met (or not met).
               For instance, it could be used to store the source IP address
               except when the request passes through a known proxy, in which
               case we'd store a converted form of a header containing that IP
               address.

  Some protocols or applications require complex stickiness rules and cannot
  always simply rely on cookies nor hashing. The "stick store-request" statement
  describes a rule to decide what to extract from the request and when to do
  it, in order to store it into a stickiness table for further requests to
  match it using the "stick match" statement. Obviously the extracted part must
  make sense and have a chance to be matched in a further request. Storing a
  client's IP address for instance often makes sense. Storing an ID found in a
  URL parameter also makes sense. Storing a source port will almost never make
  any sense because it will be randomly matched. See section 7 for a complete
  list of possible patterns and transformation rules.

  The table has to be declared using the "stick-table" statement. It must be of
  a type compatible with the pattern. By default it is the one which is present
  in the same backend. It is possible to share a table with other backends by
  referencing it using the "table" keyword. If another table is referenced,
  the server's ID inside the backends are used. By default, all server IDs
  start at 1 in each backend, so the server ordering is enough. But in case of
  doubt, it is highly recommended to force server IDs using their "id" setting.

  It is possible to restrict the conditions where a "stick store-request"
  statement will apply, using "if" or "unless" followed by a condition. This
  condition will be evaluated while parsing the request, so any criteria can be
  used. See section 7 for ACL based conditions.

  There is no limit on the number of "stick store-request" statements, but
  there is a limit of 8 simultaneous stores per request or response. This
  makes it possible to store up to 8 criteria, all extracted from either the
  request or the response, regardless of the number of rules. Only the 8 first
  ones which match will be kept. Using this, it is possible to feed multiple
  tables at once in the hope to increase the chance to recognize a user on
  another protocol or access method. Using multiple store-request rules with
  the same table is possible and may be used to find the best criterion to rely
  on, by arranging the rules by decreasing preference order. Only the first
  extracted criterion for a given table will be stored. All subsequent store-
  request rules referencing the same table will be skipped and their ACLs will
  not be evaluated.

  The "store-request" rules are evaluated once the server connection has been
  established, so that the table will contain the real server that processed
  the request.

  Example :
    # forward SMTP users to the same server they just used for POP in the
    # last 30 minutes
    backend pop
        mode tcp
        balance roundrobin
        stick store-request src
        stick-table type ip size 200k expire 30m
        server s1 192.168.1.1:110
        server s2 192.168.1.1:110

    backend smtp
        mode tcp
        balance roundrobin
        stick match src table pop
        server s1 192.168.1.1:25
        server s2 192.168.1.1:25

  See also : "stick-table", "stick on", section 11 about stick-tables, and
             section 7 about ACLs and sample fetching.


stick store-response <pattern> [table <table>] [{if | unless} <condition>]
  Define a response pattern used to create an entry in a stickiness table

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 no    |    no    |   yes  |   yes

  Arguments :
    <pattern>  is a sample expression rule as described in section 7.3. It
               describes what elements of the response or connection will
               be analyzed, extracted and stored in the table once a
               server is selected.

    <table>    is an optional stickiness table name. If unspecified, the same
               backend's table is used. A stickiness table is declared using
               the "stick-table" statement.

    <cond>     is an optional storage condition. It makes it possible to store
               certain criteria only when some conditions are met (or not met).
               For instance, it could be used to store the SSL session ID only
               when the response is a SSL server hello.

  Some protocols or applications require complex stickiness rules and cannot
  always simply rely on cookies nor hashing. The "stick store-response"
  statement  describes a rule to decide what to extract from the response and
  when to do it, in order to store it into a stickiness table for further
  requests to match it using the "stick match" statement. Obviously the
  extracted part must make sense and have a chance to be matched in a further
  request. Storing an ID found in a header of a response makes sense.
  See section 7 for a complete list of possible patterns and transformation
  rules.

  The table has to be declared using the "stick-table" statement. It must be of
  a type compatible with the pattern. By default it is the one which is present
  in the same backend. It is possible to share a table with other backends by
  referencing it using the "table" keyword. If another table is referenced,
  the server's ID inside the backends are used. By default, all server IDs
  start at 1 in each backend, so the server ordering is enough. But in case of
  doubt, it is highly recommended to force server IDs using their "id" setting.

  It is possible to restrict the conditions where a "stick store-response"
  statement will apply, using "if" or "unless" followed by a condition. This
  condition will be evaluated while parsing the response, so any criteria can
  be used. See section 7 for ACL based conditions.

  There is no limit on the number of "stick store-response" statements, but
  there is a limit of 8 simultaneous stores per request or response. This
  makes it possible to store up to 8 criteria, all extracted from either the
  request or the response, regardless of the number of rules. Only the 8 first
  ones which match will be kept. Using this, it is possible to feed multiple
  tables at once in the hope to increase the chance to recognize a user on
  another protocol or access method. Using multiple store-response rules with
  the same table is possible and may be used to find the best criterion to rely
  on, by arranging the rules by decreasing preference order. Only the first
  extracted criterion for a given table will be stored. All subsequent store-
  response rules referencing the same table will be skipped and their ACLs will
  not be evaluated. However, even if a store-request rule references a table, a
  store-response rule may also use the same table. This means that each table
  may learn exactly one element from the request and one element from the
  response at once.

  The table will contain the real server that processed the request.

  Example :
    # Learn SSL session ID from both request and response and create affinity.
    backend https
        mode tcp
        balance roundrobin
        # maximum SSL session ID length is 32 bytes.
        stick-table type binary len 32 size 30k expire 30m

        acl clienthello req.ssl_hello_type 1
        acl serverhello res.ssl_hello_type 2

        # use tcp content accepts to detects ssl client and server hello.
        tcp-request inspect-delay 5s
        tcp-request content accept if clienthello

        # no timeout on response inspect delay by default.
        tcp-response content accept if serverhello

        # SSL session ID (SSLID) may be present on a client or server hello.
        # Its length is coded on 1 byte at offset 43 and its value starts
        # at offset 44.

        # Match and learn on request if client hello.
        stick on req.payload_lv(43,1) if clienthello

        # Learn on response if server hello.
        stick store-response resp.payload_lv(43,1) if serverhello

        server s1 192.168.1.1:443
        server s2 192.168.1.1:443

  See also : "stick-table", "stick on", section 11 about stick-tables, and
             section 7 about ACLs and pattern extraction.


stick-table type <type> size <size> [expire <expire>] [args...]
  Configure the stickiness table for the current section

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 no    |    yes   |   yes  |   yes

  This is used to declare and configure a stick-table. Please refer to section
  11.1 for the complete details and the list of supported arguments. Only the
  type and the size are mandatory.


tcp-check comment <string>
  Defines a comment for the following the tcp-check rule, reported in logs if
  it fails.

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <string>  is the comment message to add in logs if the following tcp-check
              rule fails.

  It only works for connect, send and expect rules. It is useful to make
  user-friendly error reporting.

  See also : "option tcp-check", "tcp-check connect", "tcp-check send" and
             "tcp-check expect".


tcp-check connect [default] [port <expr>] [addr <ip>] [send-proxy] [via-socks4]
                  [ssl] [sni <sni>] [alpn <alpn>] [linger]
                  [proto <name>] [comment <msg>]
  Opens a new connection

  May be used in the following contexts: tcp, http, log

  May be used in sections:   defaults | frontend | listen | backend
                               yes    |    no    |   yes  |   yes

  Arguments :
    comment <msg>  defines a message to report if the rule evaluation fails.

    default      Use default options of the server line to do the health
                 checks. The server options are used only if not redefined.

    port <expr>  if not set, check port or server port is used.
                 It tells HAProxy where to open the connection to.
                 <port> must be a valid TCP port source integer, from 1 to
                 65535 or an sample-fetch expression.

    addr <ip>    defines the IP address to do the health check.

    send-proxy   send a PROXY protocol string

    via-socks4   enables outgoing health checks using upstream socks4 proxy.

    ssl          opens a ciphered connection

    sni <sni>    specifies the SNI to use to do health checks over SSL.

    alpn <alpn>  defines which protocols to advertise with ALPN. The protocol
                 list consists in a comma-delimited list of protocol names,
                 for instance: "http/1.1,http/1.0" (without quotes).
                 If it is not set, the server ALPN is used.

    proto <name> forces the multiplexer's protocol to use for this connection.
                 It must be a TCP mux protocol and it must be usable on the
                 backend side. The list of available protocols is reported in
                 haproxy -vv.

    linger       cleanly close the connection instead of using a single RST.

  When an application lies on more than a single TCP port or when HAProxy
  load-balance many services in a single backend, it makes sense to probe all
  the services individually before considering a server as operational.

  When there are no TCP port configured on the server line neither server port
  directive, then the 'tcp-check connect port <port>' must be the first step
  of the sequence.

  In a tcp-check ruleset a 'connect' is required, it is also mandatory to start
  the ruleset with a 'connect' rule. Purpose is to ensure admin know what they
  do.

  When a connect must start the ruleset, if may still be preceded by set-var,
  unset-var or comment rules.

  Examples :
         # check HTTP and HTTPs services on a server.
         # first open port 80 thanks to server line port directive, then
         # tcp-check opens port 443, ciphered and run a request on it:
         option tcp-check
         tcp-check connect
         tcp-check send GET\ /\ HTTP/1.0\r\n
         tcp-check send Host:\ haproxy.1wt.eu\r\n
         tcp-check send \r\n
         tcp-check expect rstring (2..|3..)
         tcp-check connect port 443 ssl
         tcp-check send GET\ /\ HTTP/1.0\r\n
         tcp-check send Host:\ haproxy.1wt.eu\r\n
         tcp-check send \r\n
         tcp-check expect rstring (2..|3..)
         server www 10.0.0.1 check port 80

         # check both POP and IMAP from a single server:
         option tcp-check
         tcp-check connect port 110 linger
         tcp-check expect string +OK\ POP3\ ready
         tcp-check connect port 143
         tcp-check expect string *\ OK\ IMAP4\ ready
         server mail 10.0.0.1 check

  See also : "option tcp-check", "tcp-check send", "tcp-check expect"


tcp-check expect [min-recv <int>] [comment <msg>]
                 [ok-status <st>] [error-status <st>] [tout-status <st>]
                 [on-success <fmt>] [on-error <fmt>] [status-code <expr>]
                 [!] <match> <pattern>
  Specify data to be collected and analyzed during a generic health check

  May be used in the following contexts: tcp, http, log

  May be used in sections:   defaults | frontend | listen | backend
                               yes    |    no    |   yes  |   yes

  Arguments :
    comment <msg>  defines a message to report if the rule evaluation fails.

    min-recv  is optional and can define the minimum amount of data required to
              evaluate the current expect rule. If the number of received bytes
              is under this limit, the check will wait for more data. This
              option can be used to resolve some ambiguous matching rules or to
              avoid executing costly regex matches on content known to be still
              incomplete. If an exact string (string or binary) is used, the
              minimum between the string length and this parameter is used.
              This parameter is ignored if it is set to -1. If the expect rule
              does not match, the check will wait for more data. If set to 0,
              the evaluation result is always conclusive.

    <match>   is a keyword indicating how to look for a specific pattern in the
              response. The keyword may be one of "string", "rstring", "binary" or
              "rbinary".
              The keyword may be preceded by an exclamation mark ("!") to negate
              the match. Spaces are allowed between the exclamation mark and the
              keyword. See below for more details on the supported keywords.

    ok-status <st>     is optional and can be used to set the check status if
                       the expect rule is successfully evaluated and if it is
                       the last rule in the tcp-check ruleset. "L7OK", "L7OKC",
                       "L6OK" and "L4OK" are supported :
                         - L7OK  : check passed on layer 7
                         - L7OKC : check conditionally passed on layer 7, set
                                   server to NOLB state.
                         - L6OK  : check passed on layer 6
                         - L4OK  : check passed on layer 4
                        By default "L7OK" is used.

    error-status <st>  is optional and can be used to set the check status if
                       an error occurred during the expect rule evaluation.
                       "L7OKC", "L7RSP", "L7STS", "L6RSP" and "L4CON" are
                       supported :
                         - L7OKC : check conditionally passed on layer 7, set
                                   server to NOLB state.
                         - L7RSP : layer 7 invalid response - protocol error
                         - L7STS : layer 7 response error, for example HTTP 5xx
                         - L6RSP : layer 6 invalid response - protocol error
                         - L4CON : layer 1-4 connection problem
                       By default "L7RSP" is used.

    tout-status <st>   is optional and can be used to set the check status if
                       a timeout occurred during the expect rule evaluation.
                       "L7TOUT", "L6TOUT", and "L4TOUT" are supported :
                         - L7TOUT : layer 7 (HTTP/SMTP) timeout
                         - L6TOUT : layer 6 (SSL) timeout
                         - L4TOUT : layer 1-4 timeout
                       By default "L7TOUT" is used.

    on-success <fmt>   is optional and can be used to customize the
                       informational message reported in logs if the expect
                       rule is successfully evaluated and if it is the last rule
                       in the tcp-check ruleset. <fmt> is a Custom log format
                       (see section 8.2.6).

    on-error <fmt>     is optional and can be used to customize the
                       informational message reported in logs if an error
                       occurred during the expect rule evaluation. <fmt> is a
                       Custom log format (see section 8.2.6).

    status-code <expr> is optional and can be used to set the check status code
                       reported in logs, on success or on error. <expr> is a
                       standard HAProxy expression formed by a sample-fetch
                       followed by some converters.

    <pattern> is the pattern to look for. It may be a string or a regular
              expression. If the pattern contains spaces, they must be escaped
              with the usual backslash ('\').
              If the match is set to binary, then the pattern must be passed as
              a series of hexadecimal digits in an even number. Each sequence of
              two digits will represent a byte. The hexadecimal digits may be
              used upper or lower case.

  The available matches are intentionally similar to their http-check cousins :

    string <string> : test the exact string matches in the response buffer.
                      A health check response will be considered valid if the
                      response's buffer contains this exact string. If the
                      "string" keyword is prefixed with "!", then the response
                      will be considered invalid if the body contains this
                      string. This can be used to look for a mandatory pattern
                      in a protocol response, or to detect a failure when a
                      specific error appears in a protocol banner.

    rstring <regex> : test a regular expression on the response buffer.
                      A health check response will be considered valid if the
                      response's buffer matches this expression. If the
                      "rstring" keyword is prefixed with "!", then the response
                      will be considered invalid if the body matches the
                      expression.

    string-lf <fmt> : test a Custom log format match in the response's buffer.
                      A health check response will be considered valid if the
                      response's buffer contains the  string resulting of the
                      evaluation of <fmt>, which follows the Custom log format
                      rules described in section 8.2.6. If prefixed with "!",
                      then the response will be considered invalid if the
                      buffer contains the string.

    binary <hexstring> : test the exact string in its hexadecimal form matches
                         in the response buffer. A health check response will
                         be considered valid if the response's buffer contains
                         this exact hexadecimal string.
                         Purpose is to match data on binary protocols.

    rbinary <regex> : test a regular expression on the response buffer, like
                      "rstring". However, the response buffer is transformed
                      into its hexadecimal form, including NUL-bytes. This
                      allows using all regex engines to match any binary
                      content.  The hexadecimal transformation takes twice the
                      size of the original response. As such, the expected
                      pattern should work on at-most half the response buffer
                      size.

    binary-lf <hexfmt> : test a Custom log format in its hexadecimal form match
                         in the response's buffer. A health check response will
                         be considered valid if the response's buffer contains
                         the hexadecimal string resulting of the evaluation of
                         <fmt>, which follows the Custom log format rules (see
                         section 8.2.6). If prefixed with "!", then the
                         response will be considered invalid if the buffer
                         contains the hexadecimal string. The hexadecimal
                         string is converted in a binary string before matching
                         the response's buffer.

  It is important to note that the responses will be limited to a certain size
  defined by the global "tune.bufsize" option, which defaults to 16384 bytes.
  Thus, too large responses may not contain the mandatory pattern when using
  "string", "rstring" or binary. If a large response is absolutely required, it
  is possible to change the default max size by setting the global variable.
  However, it is worth keeping in mind that parsing very large responses can
  waste some CPU cycles, especially when regular expressions are used, and that
  it is always better to focus the checks on smaller resources. Also, in its
  current state, the check will not find any string nor regex past a null
  character in the response. Similarly it is not possible to request matching
  the null character.

  Examples :
         # perform a POP check
         option tcp-check
         tcp-check expect string +OK\ POP3\ ready

         # perform an IMAP check
         option tcp-check
         tcp-check expect string *\ OK\ IMAP4\ ready

         # look for the redis master server
         option tcp-check
         tcp-check send PING\r\n
         tcp-check expect string +PONG
         tcp-check send info\ replication\r\n
         tcp-check expect string role:master
         tcp-check send QUIT\r\n
         tcp-check expect string +OK


  See also : "option tcp-check", "tcp-check connect", "tcp-check send",
             "tcp-check send-binary", "http-check expect", tune.bufsize


tcp-check send <data> [comment <msg>]
tcp-check send-lf <fmt> [comment <msg>]
  Specify a string or a Custom log format to be sent as a question during a
  generic health check

  May be used in the following contexts: tcp, http, log

  May be used in sections:   defaults | frontend | listen | backend
                               yes    |    no    |   yes  |   yes

  Arguments :
    comment <msg>  defines a message to report if the rule evaluation fails.

    <data>         is the string that will be sent during a generic health
                   check session.

    <fmt>          is the Custom log format that will be sent, once evaluated,
                   during a generic health check session (see section 8.2.6).

  Examples :
         # look for the redis master server
         option tcp-check
         tcp-check send info\ replication\r\n
         tcp-check expect string role:master

  See also : "option tcp-check", "tcp-check connect", "tcp-check expect",
             "tcp-check send-binary", tune.bufsize


tcp-check send-binary <hexstring> [comment <msg>]
tcp-check send-binary-lf <hexfmt> [comment <msg>]
  Specify an hex digits string or an hex digits Custom log format to be sent as
  a binary question during a raw tcp health check

  May be used in the following contexts: tcp, http, log

  May be used in sections:   defaults | frontend | listen | backend
                               yes    |    no    |   yes  |   yes

  Arguments :
    comment <msg>  defines a message to report if the rule evaluation fails.

    <hexstring>    is the hexadecimal string that will be send, once converted
                   to binary, during a generic health check session.

    <hexfmt>       is the hexadecimal Custom log format that will be send, once
                   evaluated and converted to binary, during a generic health
                   check session (see section 8.2.6).

  Examples :
         # redis check in binary
         option tcp-check
         tcp-check send-binary 50494e470d0a # PING\r\n
         tcp-check expect binary 2b504F4e47 # +PONG


  See also : "option tcp-check", "tcp-check connect", "tcp-check expect",
             "tcp-check send", tune.bufsize


tcp-check set-var(<var-name>[,<cond>...]) <expr>
tcp-check set-var-fmt(<var-name>[,<cond>...]) <fmt>
  This operation sets the content of a variable. The variable is declared inline.

  May be used in the following contexts: tcp, http, log

  May be used in sections:   defaults | frontend | listen | backend
                               yes    |    no    |   yes  |   yes

  Arguments :
   <var-name>   The name of the variable. Only "proc", "sess" and "check"
                scopes can be used. See section 2.8 about variables for details.

    <cond>      A set of conditions that must all be true for the variable to
                actually be set (such as "ifnotempty", "ifgt" ...). See the
                set-var converter's description for a full list of possible
                conditions.

    <expr>      Is a sample-fetch expression potentially followed by converters.

    <fmt>       This is the value expressed using Custom log format rules (see
                Custom log format in section 8.2.6).

  Examples :
    tcp-check set-var(check.port) int(1234)
    tcp-check set-var-fmt(check.name) "%H"


tcp-check unset-var(<var-name>)
  Free a reference to a variable within its scope.

  May be used in the following contexts: tcp, http, log

  May be used in sections:   defaults | frontend | listen | backend
                               yes    |    no    |   yes  |   yes

  Arguments :
   <var-name>   The name of the variable. Only "proc", "sess" and "check"
                scopes can be used. See section 2.8 about variables for details.

  Examples :
    tcp-check unset-var(check.port)


tcp-request connection <action> <options...> [ { if | unless } <condition> ]
  Perform an action on an incoming connection depending on a layer 4 condition

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                yes(!) |    yes   |   yes  |   no

  Arguments :
    <action>    defines the action to perform if the condition applies. See
                below.

    <condition> is a standard layer4-only ACL-based condition (see section 7).

  Immediately after acceptance of a new incoming connection, it is possible to
  evaluate some conditions to decide whether this connection must be accepted
  or dropped or have its counters tracked. Those conditions cannot make use of
  any data contents because the connection has not been read from yet, and the
  buffers are not yet allocated. This is used to selectively and very quickly
  accept or drop connections from various sources with a very low overhead. If
  some contents need to be inspected in order to take the decision, the
  "tcp-request content" statements must be used instead.

  The "tcp-request connection" rules are evaluated in their exact declaration
  order. If no rule matches or if there is no rule, the default action is to
  accept the incoming connection. There is no specific limit to the number of
  rules which may be inserted. Any rule may optionally be followed by an
  ACL-based condition, in which case it will only be evaluated if the condition
  evaluates to true.

  The condition is evaluated just before the action is executed, and the action
  is performed exactly once. As such, there is no problem if an action changes
  an element which is checked as part of the condition. This also means that
  multiple actions may rely on the same condition so that the first action that
  changes the condition's evaluation is sufficient to implicitly disable the
  remaining actions. This is used for example when trying to assign a value to
  a variable from various sources when it's empty.

  The first keyword after "tcp-request connection" in the syntax is the rule's
  action, optionally followed by a varying number of arguments for the action.
  The supported actions and their respective syntaxes are enumerated in
  section 4.3 "Actions" (look for actions which tick "TCP RqCon").

  This directive is only available from named defaults sections, not anonymous
  ones. Rules defined in the defaults section are evaluated before ones in the
  associated proxy section. To avoid ambiguities, in this case the same
  defaults section cannot be used by proxies with the frontend capability and
  by proxies with the backend capability. It means a listen section cannot use
  a defaults section defining such rules.

  Note that the "if/unless" condition is optional. If no condition is set on
  the action, it is simply performed unconditionally. That can be useful for
  "track-sc*" actions as well as for changing the default action to a reject.

  Example: accept all connections from white-listed hosts, reject too fast
           connection without counting them, and track accepted connections.
           This results in connection rate being capped from abusive sources.

        tcp-request connection accept if { src -f /etc/haproxy/whitelist.lst }
        tcp-request connection reject if { src_conn_rate gt 10 }
        tcp-request connection track-sc0 src

  Example: accept all connections from white-listed hosts, count all other
           connections and reject too fast ones. This results in abusive ones
           being blocked as long as they don't slow down.

        tcp-request connection accept if { src -f /etc/haproxy/whitelist.lst }
        tcp-request connection track-sc0 src
        tcp-request connection reject if { sc0_conn_rate gt 10 }

  Example: enable the PROXY protocol for traffic coming from all known proxies.

        tcp-request connection expect-proxy layer4 if { src -f proxies.lst }

  See section 7 about ACL usage.

  See also : "tcp-request session", "tcp-request content", "stick-table"

tcp-request content <action> [{if | unless} <condition>]
  Perform an action on a new session depending on a layer 4-7 condition

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                yes(!) |    yes   |   yes  |   yes

  Arguments :
    <action>    defines the action to perform if the condition applies. See
                below.

    <condition> is a standard layer 4-7 ACL-based condition (see section 7).

  A request's contents can be analyzed at an early stage of request processing
  called "TCP content inspection". During this stage, ACL-based rules are
  evaluated every time the request contents are updated, until either an
  "accept", a "reject" or a "switch-mode" rule matches, or the TCP request
  inspection delay expires with no matching rule.

  The first difference between these rules and "tcp-request connection" rules
  is that "tcp-request content" rules can make use of contents to take a
  decision. Most often, these decisions will consider a protocol recognition or
  validity. The second difference is that content-based rules can be used in
  both frontends and backends. In case of HTTP keep-alive with the client, all
  tcp-request content rules are evaluated again, so HAProxy keeps a record of
  what sticky counters were assigned by a "tcp-request connection" versus a
  "tcp-request content" rule, and flushes all the content-related ones after
  processing an HTTP request, so that they may be evaluated again by the rules
  being evaluated again for the next request. This is of particular importance
  when the rule tracks some L7 information or when it is conditioned by an
  L7-based ACL, since tracking may change between requests.

  Content-based rules are evaluated in their exact declaration order. If no
  rule matches or if there is no rule, the default action is to accept the
  contents. There is no specific limit to the number of rules which may be
  inserted.

  While there is nothing mandatory about it, it is recommended to use the
  track-sc0 in "tcp-request connection" rules, track-sc1 for "tcp-request
  content" rules in the frontend, and track-sc2 for "tcp-request content"
  rules in the backend, because that makes the configuration more readable
  and easier to troubleshoot, but this is just a guideline and all counters
  may be used everywhere.

  The first keyword after "tcp-request content" in the syntax is the rule's
  action, optionally followed by a varying number of arguments for the action.
  The supported actions and their respective syntaxes are enumerated in
  section 4.3 "Actions" (look for actions which tick "TCP RqCnt").

  This directive is only available from named defaults sections, not anonymous
  ones. Rules defined in the defaults section are evaluated before ones in the
  associated proxy section. To avoid ambiguities, in this case the same
  defaults section cannot be used by proxies with the frontend capability and
  by proxies with the backend capability. It means a listen section cannot use
  a defaults section defining such rules.

  Note that the "if/unless" condition is optional. If no condition is set on
  the action, it is simply performed unconditionally. That can be useful for
  "track-sc*" actions as well as for changing the default action to a reject.

  Note also that it is recommended to use a "tcp-request session" rule to track
  information that does *not* depend on Layer 7 contents, especially for HTTP
  frontends. Some HTTP processing are performed at the session level and may
  lead to an early rejection of the requests. Thus, the tracking at the content
  level may be disturbed in such case. A warning is emitted during startup to
  prevent, as far as possible, such unreliable usage.

  It is perfectly possible to match layer 7 contents with "tcp-request content"
  rules from a TCP proxy, since HTTP-specific ACL matches are able to
  preliminarily parse the contents of a buffer before extracting the required
  data. If the buffered contents do not parse as a valid HTTP message, then the
  ACL does not match.  The parser which is involved there is exactly the same
  as for all other HTTP processing, so there is no risk of parsing something
  differently. In an HTTP frontend or an HTTP backend, it is guaranteed that
  HTTP contents will always be immediately present when the rule is evaluated
  first because the HTTP parsing is performed in the early stages of the
  connection processing, at the session level. But for such proxies, using
  "http-request" rules is much more natural and recommended.

  Tracking layer7 information is also possible provided that the information
  are present when the rule is processed. The rule processing engine is able to
  wait until the inspect delay expires when the data to be tracked is not yet
  available.

  Example:
    tcp-request content use-service lua.deny if { src -f /etc/haproxy/blacklist.lst }

  Example:
        tcp-request content set-var(sess.my_var) src
        tcp-request content set-var-fmt(sess.from) %[src]:%[src_port]
        tcp-request content unset-var(sess.my_var2)

  Example:
        # Accept HTTP requests containing a Host header saying "example.com"
        # and reject everything else. (Only works for HTTP/1 connections)
        acl is_host_com hdr(Host) -i example.com
        tcp-request inspect-delay 30s
        tcp-request content accept if is_host_com
        tcp-request content reject

        # Accept HTTP requests containing a Host header saying "example.com"
        # and reject everything else. (works for HTTP/1 and HTTP/2 connections)
        acl is_host_com hdr(Host) -i example.com
        tcp-request inspect-delay 5s
        tcp-request content switch-mode http if HTTP
        tcp-request content reject   # non-HTTP traffic is implicit here
        ...
        http-request reject unless is_host_com

  Example:
        # reject SMTP connection if client speaks first
        tcp-request inspect-delay 30s
        acl content_present req.len gt 0
        tcp-request content reject if content_present

        # Forward HTTPS connection only if client speaks
        tcp-request inspect-delay 30s
        acl content_present req.len gt 0
        tcp-request content accept if content_present
        tcp-request content reject

  Example:
        # Track the last IP(stick-table type string) from X-Forwarded-For
        tcp-request inspect-delay 10s
        tcp-request content track-sc0 hdr(x-forwarded-for,-1)
        # Or track the last IP(stick-table type ip|ipv6) from X-Forwarded-For
        tcp-request content track-sc0 req.hdr_ip(x-forwarded-for,-1)

  Example:
        # track request counts per "base" (concatenation of Host+URL)
        tcp-request inspect-delay 10s
        tcp-request content track-sc0 base table req-rate

  Example: track per-frontend and per-backend counters, block abusers at the
           frontend when the backend detects abuse(and marks gpc0).

        frontend http
            # Use General Purpose Counter 0 in SC0 as a global abuse counter
            # protecting all our sites
            stick-table type ip size 1m expire 5m store gpc0
            tcp-request connection track-sc0 src
            tcp-request connection reject if { sc0_get_gpc0 gt 0 }
            ...
            use_backend http_dynamic if { path_end .php }

        backend http_dynamic
            # if a source makes too fast requests to this dynamic site (tracked
            # by SC1), block it globally in the frontend.
            stick-table type ip size 1m expire 5m store http_req_rate(10s)
            acl click_too_fast sc1_http_req_rate gt 10
            acl mark_as_abuser sc0_inc_gpc0(http) gt 0
            tcp-request content track-sc1 src
            tcp-request content reject if click_too_fast mark_as_abuser

  See section 7 about ACL usage.

  See also : "tcp-request connection", "tcp-request session",
             "tcp-request inspect-delay", and "http-request".

tcp-request inspect-delay <timeout>
  Set the maximum allowed time to wait for data during content inspection

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                yes(!) |    yes   |   yes  |   yes

  Arguments :
    <timeout> is the timeout value specified in milliseconds by default, but
              can be in any other unit if the number is suffixed by the unit,
              as explained at the top of this document.

  People using HAProxy primarily as a TCP relay are often worried about the
  risk of passing any type of protocol to a server without any analysis. In
  order to be able to analyze the request contents, we must first withhold
  the data then analyze them. This statement simply enables withholding of
  data for at most the specified amount of time.

  TCP content inspection applies very early when a connection reaches a
  frontend, then very early when the connection is forwarded to a backend. This
  means that a connection may experience a first delay in the frontend and a
  second delay in the backend if both have tcp-request rules.

  Note that when performing content inspection, HAProxy will evaluate the whole
  rules for every new chunk which gets in, taking into account the fact that
  those data are partial. If no rule matches before the aforementioned delay,
  a last check is performed upon expiration, this time considering that the
  contents are definitive. If no delay is set, HAProxy will not wait at all
  and will immediately apply a verdict based on the available information.
  Obviously this is unlikely to be very useful and might even be racy, so such
  setups are not recommended.

  Note the inspection delay is shortened if an connection error or shutdown is
  experienced or if the request buffer appears as full.

  As soon as a rule matches, the request is released and continues as usual. If
  the timeout is reached and no rule matches, the default policy will be to let
  it pass through unaffected.

  For most protocols, it is enough to set it to a few seconds, as most clients
  send the full request immediately upon connection. Add 3 or more seconds to
  cover TCP retransmits but that's all. For some protocols, it may make sense
  to use large values, for instance to ensure that the client never talks
  before the server (e.g. SMTP), or to wait for a client to talk before passing
  data to the server (e.g. SSL). Note that the client timeout must cover at
  least the inspection delay, otherwise it will expire first. If the client
  closes the connection or if the buffer is full, the delay immediately expires
  since the contents will not be able to change anymore.

  This directive is only available from named defaults sections, not anonymous
  ones. Proxies inherit this value from their defaults section.

  See also : "tcp-request content accept", "tcp-request content reject",
             "timeout client".


tcp-request session <action> [{if | unless} <condition>]
  Perform an action on a validated session depending on a layer 5 condition

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                yes(!) |    yes   |   yes  |   no

  Arguments :
    <action>    defines the action to perform if the condition applies. See
                below.

    <condition> is a standard layer5-only ACL-based condition (see section 7).

  Once a session is validated, (i.e. after all handshakes have been completed),
  it is possible to evaluate some conditions to decide whether this session
  must be accepted or dropped or have its counters tracked. Those conditions
  cannot make use of any data contents because no buffers are allocated yet and
  the processing cannot wait at this stage. The main use case is to copy some
  early information into variables (since variables are accessible in the
  session), or to keep track of some information collected after the handshake,
  such as SSL-level elements (SNI, ciphers, client cert's CN) or information
  from the PROXY protocol header (e.g. track a source forwarded this way). The
  extracted information can thus be copied to a variable or tracked using
  "track-sc" rules. Of course it is also possible to decide to accept/reject as
  with other rulesets. Most operations performed here could also be performed
  in "tcp-request content" rules, except that in HTTP these rules are evaluated
  for each new request, and that might not always be acceptable. For example a
  rule might increment a counter on each evaluation. It would also be possible
  that a country is resolved by geolocation from the source IP address,
  assigned to a session-wide variable, then the source address rewritten from
  an HTTP header for all requests. If some contents need to be inspected in
  order to take the decision, the "tcp-request content" statements must be used
  instead.

  The "tcp-request session" rules are evaluated in their exact declaration
  order. If no rule matches or if there is no rule, the default action is to
  accept the incoming session. There is no specific limit to the number of
  rules which may be inserted.

  The first keyword after "tcp-request session" in the syntax is the rule's
  action, optionally followed by a varying number of arguments for the action.
  The supported actions and their respective syntaxes are enumerated in
  section 4.3 "Actions" (look for actions which tick "TCP RqSes").

  This directive is only available from named defaults sections, not anonymous
  ones. Rules defined in the defaults section are evaluated before ones in the
  associated proxy section. To avoid ambiguities, in this case the same
  defaults section cannot be used by proxies with the frontend capability and
  by proxies with the backend capability. It means a listen section cannot use
  a defaults section defining such rules.

  Note that the "if/unless" condition is optional. If no condition is set on
  the action, it is simply performed unconditionally. That can be useful for
  "track-sc*" actions as well as for changing the default action to a reject.

  Example: track the original source address by default, or the one advertised
           in the PROXY protocol header for connection coming from the local
           proxies. The first connection-level rule enables receipt of the
           PROXY protocol for these ones, the second rule tracks whatever
           address we decide to keep after optional decoding.

        tcp-request connection expect-proxy layer4 if { src -f proxies.lst }
        tcp-request session track-sc0 src

  Example: accept all sessions from white-listed hosts, reject too fast
           sessions without counting them, and track accepted sessions.
           This results in session rate being capped from abusive sources.

        tcp-request session accept if { src -f /etc/haproxy/whitelist.lst }
        tcp-request session reject if { src_sess_rate gt 10 }
        tcp-request session track-sc0 src

  Example: accept all sessions from white-listed hosts, count all other
           sessions and reject too fast ones. This results in abusive ones
           being blocked as long as they don't slow down.

        tcp-request session accept if { src -f /etc/haproxy/whitelist.lst }
        tcp-request session track-sc0 src
        tcp-request session reject if { sc0_sess_rate gt 10 }

  See section 7 about ACL usage.

  See also : "tcp-request connection", "tcp-request content", "stick-table"

tcp-response content <action> [{if | unless} <condition>]
  Perform an action on a session response depending on a layer 4-7 condition

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                yes(!) |    no    |   yes  |   yes

  Arguments :
    <action>    defines the action to perform if the condition applies. See
                below.

    <condition> is a standard layer 4-7 ACL-based condition (see section 7).

  Response contents can be analyzed at an early stage of response processing
  called "TCP content inspection". During this stage, ACL-based rules are
  evaluated every time the response contents are updated, until either a final
  rule matches, or a TCP response inspection delay is set and expires with no
  matching rule.

  Most often, these decisions will consider a protocol recognition or validity.

  Content-based rules are evaluated in their exact declaration order. If no
  rule matches or if there is no rule, the default action is to accept the
  contents. There is no specific limit to the number of rules which may be
  inserted.

  The first keyword after "tcp-response content" in the syntax is the rule's
  action, optionally followed by a varying number of arguments for the action.
  The supported actions and their respective syntaxes are enumerated in
  section 4.3 "Actions" (look for actions which tick "TCP RsCnt").

  This directive is only available from named defaults sections, not anonymous
  ones. Rules defined in the defaults section are evaluated before ones in the
  associated proxy section. To avoid ambiguities, in this case the same
  defaults section cannot be used by proxies with the frontend capability and
  by proxies with the backend capability. It means a listen section cannot use
  a defaults section defining such rules.

  Note that the "if/unless" condition is optional. If no condition is set on
  the action, it is simply performed unconditionally. That can be useful for
  for changing the default action to a reject.

  Several types of actions are supported :

  It is perfectly possible to match layer 7 contents with "tcp-response
  content" rules, but then it is important to ensure that a full response has
  been buffered, otherwise no contents will match. In order to achieve this,
  the best solution involves detecting the HTTP protocol during the inspection
  period.

  See section 7 about ACL usage.

  See also : "tcp-request content", "tcp-response inspect-delay"

tcp-response inspect-delay <timeout>
  Set the maximum allowed time to wait for a response during content inspection

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                               yes(!)  |    no    |   yes  |   yes

  Arguments :
    <timeout> is the timeout value specified in milliseconds by default, but
              can be in any other unit if the number is suffixed by the unit,
              as explained at the top of this document.

  This directive is only available from named defaults sections, not anonymous
  ones. Proxies inherit this value from their defaults section.

  See also : "tcp-response content", "tcp-request inspect-delay".


timeout check <timeout>
  Set additional check timeout, but only after a connection has been already
  established.

  May be used in the following contexts: tcp, http, log

  May be used in sections:    defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments:
    <timeout> is the timeout value specified in milliseconds by default, but
              can be in any other unit if the number is suffixed by the unit,
              as explained at the top of this document.

  If set, HAProxy uses min("timeout connect", "inter") as a connect timeout
  for check and "timeout check" as an additional read timeout. The "min" is
  used so that people running with *very* long "timeout connect" (e.g. those
  who needed this due to the queue or tarpit) do not slow down their checks.
  (Please also note that there is no valid reason to have such long connect
  timeouts, because "timeout queue" and "timeout tarpit" can always be used to
  avoid that).

  If "timeout check" is not set HAProxy uses "inter" for complete check
  timeout (connect + read) exactly like all <1.3.15 version.

  In most cases check request is much simpler and faster to handle than normal
  requests and people may want to kick out laggy servers so this timeout should
  be smaller than "timeout server".

  This parameter is specific to backends, but can be specified once for all in
  "defaults" sections. This is in fact one of the easiest solutions not to
  forget about it.

  See also: "timeout connect", "timeout queue", "timeout server",
            "timeout tarpit".


timeout client <timeout>
  Set the maximum inactivity time on the client side.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments :
    <timeout> is the timeout value specified in milliseconds by default, but
              can be in any other unit if the number is suffixed by the unit,
              as explained at the top of this document.

  The inactivity timeout applies when the client is expected to acknowledge or
  send data. In HTTP mode, this timeout is particularly important to consider
  during the first phase, when the client sends the request, and during the
  response while it is reading data sent by the server. That said, for the
  first phase, it is preferable to set the "timeout http-request" to better
  protect HAProxy from Slowloris like attacks. The value is specified in
  milliseconds by default, but can be in any other unit if the number is
  suffixed by the unit, as specified at the top of this document. In TCP mode
  (and to a lesser extent, in HTTP mode), it is highly recommended that the
  client timeout remains equal to the server timeout in order to avoid complex
  situations to debug. It is a good practice to cover one or several TCP packet
  losses by specifying timeouts that are slightly above multiples of 3 seconds
  (e.g. 4 or 5 seconds). If some long-lived streams are mixed with short-lived
  streams (e.g. WebSocket and HTTP), it's worth considering "timeout tunnel",
  which overrides "timeout client" and "timeout server" for tunnels, as well as
  "timeout client-fin" for half-closed connections.

  This parameter is specific to frontends, but can be specified once for all in
  "defaults" sections. This is in fact one of the easiest solutions not to
  forget about it. An unspecified timeout results in an infinite timeout, which
  is not recommended. Such a usage is accepted and works but reports a warning
  during startup because it may result in accumulation of expired sessions in
  the system if the system's timeouts are not configured either.

  See also : "timeout server", "timeout tunnel", "timeout http-request".


timeout client-fin <timeout>
  Set the inactivity timeout on the client side for half-closed connections.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments :
    <timeout> is the timeout value specified in milliseconds by default, but
              can be in any other unit if the number is suffixed by the unit,
              as explained at the top of this document.

  The inactivity timeout applies when the client is expected to acknowledge or
  send data while one direction is already shut down. This timeout is different
  from "timeout client" in that it only applies to connections which are closed
  in one direction. This is particularly useful to avoid keeping connections in
  FIN_WAIT state for too long when clients do not disconnect cleanly. This
  problem is particularly common long connections such as RDP or WebSocket.
  Note that this timeout can override "timeout tunnel" when a connection shuts
  down in one direction. It is applied to idle HTTP/2 connections once a GOAWAY
  frame was sent, often indicating an expectation that the connection quickly
  ends.

  This parameter is specific to frontends, but can be specified once for all in
  "defaults" sections. By default it is not set, so half-closed connections
  will use the other timeouts (timeout.client or timeout.tunnel).

  See also : "timeout client", "timeout server-fin", and "timeout tunnel".


timeout client-hs <timeout>
  Set the maximum time to wait for a client TLS handshake to complete. This is
  usable both for TCP and QUIC connections.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   no

  Arguments :
    <timeout> is the timeout value specified in milliseconds by default, but
              can be in any other unit if the number is suffixed by the unit,
              as explained at the top of this document.

  If this handshake timeout is not set, this is the client timeout which is used
  in place.


timeout connect <timeout>
  Set the maximum time to wait for a connection attempt to a server to succeed.

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <timeout> is the timeout value specified in milliseconds by default, but
              can be in any other unit if the number is suffixed by the unit,
              as explained at the top of this document.

  If the server is located on the same LAN as HAProxy, the connection should be
  immediate (less than a few milliseconds). Anyway, it is a good practice to
  cover one or several TCP packet losses by specifying timeouts that are
  slightly above multiples of 3 seconds (e.g. 4 or 5 seconds). By default, the
  connect timeout also presets both queue and tarpit timeouts to the same value
  if these have not been specified.

  This parameter is specific to backends, but can be specified once for all in
  "defaults" sections. This is in fact one of the easiest solutions not to
  forget about it. An unspecified timeout results in an infinite timeout, which
  is not recommended. Such a usage is accepted and works but reports a warning
  during startup because it may result in accumulation of failed sessions in
  the system if the system's timeouts are not configured either.

  See also: "timeout check", "timeout queue", "timeout server", "timeout tarpit".


timeout http-keep-alive <timeout>
  Set the maximum allowed time to wait for a new HTTP request to appear

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :
    <timeout> is the timeout value specified in milliseconds by default, but
              can be in any other unit if the number is suffixed by the unit,
              as explained at the top of this document.

  By default, the time to wait for a new request in case of keep-alive is set
  by "timeout http-request". However this is not always convenient because some
  people want very short keep-alive timeouts in order to release connections
  faster, and others prefer to have larger ones but still have short timeouts
  once the request has started to present itself.

  The "http-keep-alive" timeout covers these needs. It will define how long to
  wait for a new HTTP request to start coming after a response was sent. Once
  the first byte of request has been seen, the "http-request" timeout is used
  to wait for the complete request to come. Note that empty lines prior to a
  new request do not refresh the timeout and are not counted as a new request.

  There is also another difference between the two timeouts : when a connection
  expires during timeout http-keep-alive, no error is returned, the connection
  just closes. If the connection expires in "http-request" while waiting for a
  request to complete, an HTTP 408 error is returned to the client before
  closing the connection, unless "option http-ignore-probes" is set in the
  frontend.

  In general "timeout http-keep-alive" is best used to prevent clients from
  holding open an otherwise idle connection too long on sites seeing large
  amounts of short connections. This can be accomplished by setting the value
  to a few tens to hundreds of milliseconds in HTTP/1.1. This will close the
  connection after the client requests a page without having to hold that
  connection open to wait for more activity from the client. In that scenario,
  a new activity from the browser would result in a new handshake at the TCP
  and/or SSL layer. A common use case for this is HTTP sites serving only a
  redirect to the HTTPS page. Such connections are better not kept idle too
  long because they won't be reused, unless maybe to fetch a favicon.

  Another use case is the exact opposite: some sites want to permit clients
  to reuse idle connections for a long time (e.g. 30 seconds to one minute) but
  do not want to wait that long for the first request, in order to avoid a very
  inexpensive attack vector. In this case, the http-keep-alive timeout would be
  set to a large value, but http-request would remain low (a few seconds).

  When set to a very small value additional requests that are not pipelined
  are likely going to be handled over another connection unless the requests
  are truly pipelined, which is very rare with HTTP/1.1 (requests being sent
  back-to-back without waiting for a response). Most HTTP/1.1 implementations
  send a request, wait for a response and then send another request. A small
  value here for HTTP/1.1 may be advantageous to use less memory and sockets
  for sites with hundreds of thousands of clients, at the expense of an
  increase in handshake computation costs.

  Special care should be taken with small values when dealing with HTTP/2. The
  nature of HTTP/2 is to multiplex requests over a connection in order to save
  on the overhead of reconnecting the TCP and/or SSL layers. The protocol also
  uses control frames which cope poorly with early TCP connection closures, on
  very rare occasions this may result in truncated responses when data are
  destroyed in flight after leaving HAProxy (which then cannot even log an
  error). A suggested low starting value for HTTP/2 connections would be around
  4 seconds. This would prevent most modern keep-alive implementations from
  needlessly holding open stale connections, and at the same time would allow
  subsequent requests to reuse the connection. However, this should be adjusted
  as needed and is simply a starting point.

  If this parameter is not set, the "http-request" timeout applies, and if both
  are not set, "timeout client" still applies at the lower level. It should be
  set in the frontend to take effect, unless the frontend is in TCP mode, in
  which case the HTTP backend's timeout will be used.

  See also : "timeout http-request", "timeout client".


timeout http-request <timeout>
  Set the maximum allowed time to wait for a complete HTTP request

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :
    <timeout> is the timeout value specified in milliseconds by default, but
              can be in any other unit if the number is suffixed by the unit,
              as explained at the top of this document.

  In order to offer DoS protection, it may be required to lower the maximum
  accepted time to receive a complete HTTP request without affecting the client
  timeout. This helps protecting against established connections on which
  nothing is sent. The client timeout cannot offer a good protection against
  this abuse because it is an inactivity timeout, which means that if the
  attacker sends one character every now and then, the timeout will not
  trigger. With the HTTP request timeout, no matter what speed the client
  types, the request will be aborted if it does not complete in time. When the
  timeout expires, an HTTP 408 response is sent to the client to inform it
  about the problem, and the connection is closed. The logs will report
  termination codes "cR". Some recent browsers are having problems with this
  standard, well-documented behavior, so it might be needed to hide the 408
  code using "option http-ignore-probes" or "errorfile 408 /dev/null". See
  more details in the explanations of the "cR" termination code in section 8.5.

  By default, this timeout only applies to the header part of the request,
  and not to any data. As soon as the empty line is received, this timeout is
  not used anymore. When combined with "option http-buffer-request", this
  timeout also applies to the body of the request..
  It is used again on keep-alive connections to wait for a second
  request if "timeout http-keep-alive" is not set.

  Generally it is enough to set it to a few seconds, as most clients send the
  full request immediately upon connection. Add 3 or more seconds to cover TCP
  retransmits but that's all. Setting it to very low values (e.g. 50 ms) will
  generally work on local networks as long as there are no packet losses. This
  will prevent people from sending bare HTTP requests using telnet.

  If this parameter is not set, the client timeout still applies between each
  chunk of the incoming request. It should be set in the frontend to take
  effect, unless the frontend is in TCP mode, in which case the HTTP backend's
  timeout will be used.

  See also : "errorfile", "http-ignore-probes", "timeout http-keep-alive", and
             "timeout client", "option http-buffer-request".


timeout queue <timeout>
  Set the maximum time to wait in the queue for a connection slot to be free

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <timeout> is the timeout value specified in milliseconds by default, but
              can be in any other unit if the number is suffixed by the unit,
              as explained at the top of this document.

  When a server's maxconn is reached, connections are left pending in a queue
  which may be server-specific or global to the backend. In order not to wait
  indefinitely, a timeout is applied to requests pending in the queue. If the
  timeout is reached, it is considered that the request will almost never be
  served, so it is dropped and a 503 error is returned to the client.

  The "timeout queue" statement allows to fix the maximum time for a request to
  be left pending in a queue. If unspecified, the same value as the backend's
  connection timeout ("timeout connect") is used, for backwards compatibility
  with older versions with no "timeout queue" parameter.

  See also : "timeout connect".


timeout server <timeout>
  Set the maximum inactivity time on the server side.

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <timeout> is the timeout value specified in milliseconds by default, but
              can be in any other unit if the number is suffixed by the unit,
              as explained at the top of this document.

  The inactivity timeout applies when the server is expected to acknowledge or
  send data. In HTTP mode, this timeout is particularly important to consider
  during the first phase of the server's response, when it has to send the
  headers, as it directly represents the server's processing time for the
  request. To find out what value to put there, it's often good to start with
  what would be considered as unacceptable response times, then check the logs
  to observe the response time distribution, and adjust the value accordingly.

  The value is specified in milliseconds by default, but can be in any other
  unit if the number is suffixed by the unit, as specified at the top of this
  document. In TCP mode (and to a lesser extent, in HTTP mode), it is highly
  recommended that the client timeout remains equal to the server timeout in
  order to avoid complex situations to debug. Whatever the expected server
  response times, it is a good practice to cover at least one or several TCP
  packet losses by specifying timeouts that are slightly above multiples of 3
  seconds (e.g. 4 or 5 seconds minimum). If some long-lived streams are mixed
  with short-lived streams (e.g. WebSocket and HTTP), it's worth considering
  "timeout tunnel", which overrides "timeout client" and "timeout server" for
  tunnels.

  This parameter is specific to backends, but can be specified once for all in
  "defaults" sections. This is in fact one of the easiest solutions not to
  forget about it. An unspecified timeout results in an infinite timeout, which
  is not recommended. Such a usage is accepted and works but reports a warning
  during startup because it may result in accumulation of expired sessions in
  the system if the system's timeouts are not configured either.

  See also : "timeout client" and "timeout tunnel".


timeout server-fin <timeout>
  Set the inactivity timeout on the server side for half-closed connections.

  May be used in the following contexts: tcp, http, log

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <timeout> is the timeout value specified in milliseconds by default, but
              can be in any other unit if the number is suffixed by the unit,
              as explained at the top of this document.

  The inactivity timeout applies when the server is expected to acknowledge or
  send data while one direction is already shut down. This timeout is different
  from "timeout server" in that it only applies to connections which are closed
  in one direction. This is particularly useful to avoid keeping connections in
  FIN_WAIT state for too long when a remote server does not disconnect cleanly.
  This problem is particularly common long connections such as RDP or WebSocket.
  Note that this timeout can override "timeout tunnel" when a connection shuts
  down in one direction. This setting was provided for completeness, but in most
  situations, it should not be needed.

  This parameter is specific to backends, but can be specified once for all in
  "defaults" sections. By default it is not set, so half-closed connections
  will use the other timeouts (timeout.server or timeout.tunnel).

  See also : "timeout client-fin", "timeout server", and "timeout tunnel".


timeout tarpit <timeout>
  Set the duration for which tarpitted connections will be maintained

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    yes   |   yes  |   yes

  Arguments :
    <timeout> is the tarpit duration specified in milliseconds by default, but
              can be in any other unit if the number is suffixed by the unit,
              as explained at the top of this document.

  When a connection is tarpitted using "http-request tarpit", it is maintained
  open with no activity for a certain amount of time, then closed. "timeout
  tarpit" defines how long it will be maintained open.

  The value is specified in milliseconds by default, but can be in any other
  unit if the number is suffixed by the unit, as specified at the top of this
  document. If unspecified, the same value as the backend's connection timeout
  ("timeout connect") is used, for backwards compatibility with older versions
  with no "timeout tarpit" parameter.

  See also : "timeout connect".


timeout tunnel <timeout>
  Set the maximum inactivity time on the client and server side for tunnels.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments :
    <timeout> is the timeout value specified in milliseconds by default, but
              can be in any other unit if the number is suffixed by the unit,
              as explained at the top of this document.

  The tunnel timeout applies when a bidirectional connection is established
  between a client and a server, and the connection remains inactive in both
  directions. This timeout supersedes both the client and server timeouts once
  the connection becomes a tunnel. In TCP, this timeout is used as soon as no
  analyzer remains attached to either connection (e.g. tcp content rules are
  accepted). In HTTP, this timeout is used when a connection is upgraded (e.g.
  when switching to the WebSocket protocol, or forwarding a CONNECT request
  to a proxy), or after the first response when no keepalive/close option is
  specified.

  Since this timeout is usually used in conjunction with long-lived connections,
  it usually is a good idea to also set "timeout client-fin" to handle the
  situation where a client suddenly disappears from the net and does not
  acknowledge a close, or sends a shutdown and does not acknowledge pending
  data anymore. This can happen in lossy networks where firewalls are present,
  and is detected by the presence of large amounts of sessions in a FIN_WAIT
  state.

  The value is specified in milliseconds by default, but can be in any other
  unit if the number is suffixed by the unit, as specified at the top of this
  document. Whatever the expected normal idle time, it is a good practice to
  cover at least one or several TCP packet losses by specifying timeouts that
  are slightly above multiples of 3 seconds (e.g. 4 or 5 seconds minimum).

  This parameter is specific to backends, but can be specified once for all in
  "defaults" sections. This is in fact one of the easiest solutions not to
  forget about it.

  Example :
        defaults http
            option http-server-close
            timeout connect 5s
            timeout client 30s
            timeout client-fin 30s
            timeout server 30s
            timeout tunnel  1h    # timeout to use with WebSocket and CONNECT

  See also : "timeout client", "timeout client-fin", "timeout server".


transparent (deprecated)
  Enable client-side transparent proxying

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 yes   |    no    |   yes  |   yes

  Arguments : none

  This keyword was introduced in order to provide layer 7 persistence to layer
  3 load balancers. The idea is to use the OS's ability to redirect an incoming
  connection for a remote address to a local process (here HAProxy), and let
  this process know what address was initially requested. When this option is
  used, sessions without cookies will be forwarded to the original destination
  IP address of the incoming request (which should match that of another
  equipment), while requests with cookies will still be forwarded to the
  appropriate server.

  The "transparent" keyword is deprecated, use "option transparent" instead.

  Note that contrary to a common belief, this option does NOT make HAProxy
  present the client's IP to the server when establishing the connection.

  See also: "option transparent"

unique-id-format <fmt>
  Generate a unique ID for each request.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                  yes  |    yes   |   yes  |   no

  Arguments :
    <fmt>   is a Custom log format string (see section 8.2.6).

  This keyword creates a ID for each request using the custom log format. A
  unique ID is useful to trace a request passing through many components of
  a complex infrastructure. The newly created ID may also be logged using the
  %ID alias in the Custom log format string.

  The format should be composed from elements that are guaranteed to be
  unique when combined together. For instance, if multiple HAProxy instances
  are involved, it might be important to include the node name. It is often
  needed to log the incoming connection's source and destination addresses
  and ports. Note that since multiple requests may be performed over the same
  connection, including a request counter may help differentiate them.
  Similarly, a timestamp may protect against a rollover of the counter.
  Logging the process ID will avoid collisions after a service restart.

  It is recommended to use hexadecimal notation for many fields since it
  makes them more compact and saves space in logs.

  Example:

        unique-id-format %{+X}o\ %ci:%cp_%fi:%fp_%Ts_%rt:%pid

        will generate:

               7F000001:8296_7F00001E:1F90_4F7B0A69_0003:790A

  See also: "unique-id-header"

unique-id-header <name>
  Add a unique ID header in the HTTP request.

  May be used in the following contexts: http

  May be used in sections :   defaults | frontend | listen | backend
                                  yes  |    yes   |   yes  |   no

  Arguments :
    <name>   is the name of the header.

  Add a unique-id header in the HTTP request sent to the server, using the
  unique-id-format. It can't work if the unique-id-format doesn't exist.

  Example:

        unique-id-format %{+X}o\ %ci:%cp_%fi:%fp_%Ts_%rt:%pid
        unique-id-header X-Unique-ID

        will generate:

           X-Unique-ID: 7F000001:8296_7F00001E:1F90_4F7B0A69_0003:790A

    See also: "unique-id-format"

use_backend <backend> [{if | unless} <condition>]
  Switch to a specific backend if/unless an ACL-based condition is matched.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                  no   |    yes   |   yes  |   no

  Arguments :
    <backend>   is the name of a valid backend or "listen" section, or a
                Custom log format resolving to a backend name (see Custom
                Log Format in section 8.2.6).

    <condition> is a condition composed of ACLs, as described in section 7. If
                it is omitted, the rule is unconditionally applied.

  When doing content-switching, connections arrive on a frontend and are then
  dispatched to various backends depending on a number of conditions. The
  relation between the conditions and the backends is described with the
  "use_backend" keyword. While it is normally used with HTTP processing, it can
  also be used in pure TCP, either without content using stateless ACLs (e.g.
  source address validation) or combined with a "tcp-request" rule to wait for
  some payload.

  There may be as many "use_backend" rules as desired. All of these rules are
  evaluated in their declaration order, and the first one which matches will
  assign the backend.

  In the first form, the backend will be used if the condition is met. In the
  second form, the backend will be used if the condition is not met. If no
  condition is valid, the backend defined with "default_backend" will be used.
  If no default backend is defined, either the servers in the same section are
  used (in case of a "listen" section) or, in case of a frontend, no server is
  used and a 503 service unavailable response is returned.

  Note that it is possible to switch from a TCP frontend to an HTTP backend. In
  this case, either the frontend has already checked that the protocol is HTTP,
  and backend processing will immediately follow, or the backend will wait for
  a complete HTTP request to get in. This feature is useful when a frontend
  must decode several protocols on a unique port, one of them being HTTP.

  When <backend> is a simple name, it is resolved at configuration time, and an
  error is reported if the specified backend does not exist. If <backend> is
  a Custom log format instead, no check may be done at configuration time, so
  the backend name is resolved dynamically at run time. If the resulting
  backend name does not correspond to any valid backend, no other rule is
  evaluated, and the default_backend directive is applied instead. Note that
  when using dynamic backend names, it is highly recommended to use a prefix
  that no other backend uses in order to ensure that an unauthorized backend
  cannot be forced from the request.

  It is worth mentioning that "use_backend" rules with an explicit name are
  used to detect the association between frontends and backends to compute the
  backend's "fullconn" setting. This cannot be done for dynamic names.

  See also: "default_backend", "tcp-request", "fullconn", "log-format", and
            section 7 about ACLs.

use-fcgi-app <name>
  Defines the FastCGI application to use for the backend.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                  no   |    no    |   yes   |   yes

  Arguments :
    <name>    is the name of the FastCGI application to use.

  See section 10.1 about FastCGI application setup for details.

use-server <server> if <condition>
use-server <server> unless <condition>
  Only use a specific server if/unless an ACL-based condition is matched.

  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                  no   |    no    |   yes  |   yes

  Arguments :
    <server>    is the name of a valid server in the same backend section
                or a Custom log format string resolving to a server name
                (see section 8.2.6).

    <condition> is a condition composed of ACLs, as described in section 7.

  By default, connections which arrive to a backend are load-balanced across
  the available servers according to the configured algorithm, unless a
  persistence mechanism such as a cookie is used and found in the request.

  Sometimes it is desirable to forward a particular request to a specific
  server without having to declare a dedicated backend for this server. This
  can be achieved using the "use-server" rules. These rules are evaluated after
  the "redirect" rules and before evaluating cookies, and they have precedence
  on them. There may be as many "use-server" rules as desired. All of these
  rules are evaluated in their declaration order, and the first one which
  matches will assign the server.

  If a rule designates a server which is down, and "option persist" is not used
  and no force-persist rule was validated, it is ignored and evaluation goes on
  with the next rules until one matches.

  In the first form, the server will be used if the condition is met. In the
  second form, the server will be used if the condition is not met. If no
  condition is valid, the processing continues and the server will be assigned
  according to other persistence mechanisms.

  Note that even if a rule is matched, cookie processing is still performed but
  does not assign the server. This allows prefixed cookies to have their prefix
  stripped.

  The "use-server" statement works both in HTTP and TCP mode. This makes it
  suitable for use with content-based inspection. For instance, a server could
  be selected in a farm according to the TLS SNI field when using protocols with
  implicit TLS (also see "req.ssl_sni"). And if these servers have their weight
  set to zero, they will not be used for other traffic.

  Example :
     # intercept incoming TLS requests based on the SNI field
     use-server www if { req.ssl_sni -i www.example.com }
     server     www 192.168.0.1:443 weight 0
     use-server mail if { req.ssl_sni -i mail.example.com }
     server     mail 192.168.0.1:465 weight 0
     use-server imap if { req.ssl_sni -i imap.example.com }
     server     imap 192.168.0.1:993 weight 0
     # all the rest is forwarded to this server
     server  default 192.168.0.2:443 check

  When <server> is a simple name, it is checked against existing servers in the
  configuration and an error is reported if the specified server does not exist.
  If it is a Custom log format, no check is performed when parsing the
  configuration, and if we can't resolve a valid server name at runtime but the
  use-server rule was conditioned by an ACL returning true, no other use-server
  rule is applied and we fall back to load balancing.

  See also: "use_backend", section 5 about server and section 7 about ACLs.


4.3. Actions keywords matrix
----------------------------

Several rule sets are evaluated at various stages of the request or response
processing, and for each rule found in these rule sets, an action may be
executed if the optional condition is met.

A large number of actions are provided by default, they can modify contents,
accept/block processing, change internal states etc. And it is possible to
define new actions in Lua (in which case their names will always be prefixed
with "lua.").

While historically some actions did only exist in specific rule sets, nowadays
many actions are usable with many rule sets. The listing in this section will
indicate for which supported action where it may be used, by ticking the
corresponding abbreviated entry names among the following rule sets:

  - QUIC  Ini: the action is valid for "quic-initial" rules
  - TCP RqCon: the action is valid for "tcp-request connection" rules
  - TCP RqSes: the action is valid for "tcp-request session" rules
  - TCP RqCnt: the action is valid for "tcp-request content" rules
  - TCP RsCnt: the action is valid for "tcp-response content" rules
  - HTTP  Req:  the action is valid for "http-request" rules
  - HTTP  Res:  the action is valid for "http-response" rules
  - HTTP  Aft:  the action is valid for "http-after-response" rules

The same abbreviations are used in the reference section 4.4 below.

 keyword                QUIC: Ini   TCP: RqCon RqSes RqCnt RsCnt   HTTP: Req Res Aft
----------------------+-----------+-----------+-----+-----+------+----------+---+----
accept                         X           X     X     X     X            -   -   -
add-acl                        -           -     -     -     -            X   X   -
add-header                     -           -     -     -     -            X   X   X
allow                          -           -     -     -     -            X   X   X
attach-srv                     -           -     X     -     -            -   -   -
auth                           -           -     -     -     -            X   -   -
cache-store                    -           -     -     -     -            -   X   -
cache-use                      -           -     -     -     -            X   -   -
capture                        -           -     -     X     -            X   X   X
close                          -           -     -     -     X            -   -   -
del-acl                        -           -     -     -     -            X   X   -
del-header                     -           -     -     -     -            X   X   X
del-map                        -           -     -     -     -            X   X   X
deny                           -           -     -     -     -            X   X   -
dgram-drop                     X           -     -     -     -            -   -   -
disable-l7-retry               -           -     -     -     -            X   -   -
do-log                         X           X     X     X     X            X   X   X
do-resolve                     -           -     -     X     -            X   -   -
early-hint                     -           -     -     -     -            X   -   -
expect-netscaler-cip           -           X     -     -     -            -   -   -
expect-proxy layer4            -           X     -     -     -            -   -   -
normalize-uri                  -           -     -     -     -            X   -   -
pause                          -           -     -     -     -            X   X   -
redirect                       -           -     -     -     -            X   X   -
reject                         X           X     X     X     X            X   -   -
replace-header                 -           -     -     -     -            X   X   X
replace-path                   -           -     -     -     -            X   -   -
replace-pathq                  -           -     -     -     -            X   -   -
replace-uri                    -           -     -     -     -            X   -   -
replace-value                  -           -     -     -     -            X   X   X
return                         -           -     -     -     -            X   X   -
sc-add-gpc                     -           X     X     X     X            X   X   X
--keyword---------------QUIC--Ini---TCP--RqCon-RqSes-RqCnt-RsCnt---HTTP--Req-Res-Aft-
sc-inc-gpc                     -           X     X     X     X            X   X   X
sc-inc-gpc0                    -           X     X     X     X            X   X   X
sc-inc-gpc1                    -           X     X     X     X            X   X   X
sc-set-gpt                     -           X     X     X     X            X   X   X
sc-set-gpt0                    -           X     X     X     X            X   X   X
send-retry                     X           -     -     -     -            -   -   -
send-spoe-group                -           -     -     X     X            X   X   -
set-bandwidth-limit            -           -     -     X     X            X   X   -
set-bc-mark                    -           -     -     X     -            X   -   -
set-bc-tos                     -           -     -     X     -            X   -   -
set-dst                        -           X     X     X     -            X   -   -
set-dst-port                   -           X     X     X     -            X   -   -
set-fc-mark                    -           X     X     X     X            X   X   -
set-fc-tos                     -           X     X     X     X            X   X   -
set-header                     -           -     -     -     -            X   X   X
set-log-level                  -           -     -     X     X            X   X   X
set-map                        -           -     -     -     -            X   X   X
set-mark (deprecated)          -           X     X     X     X            X   X   -
set-method                     -           -     -     -     -            X   -   -
set-nice                       -           -     -     X     X            X   X   -
set-path                       -           -     -     -     -            X   -   -
set-pathq                      -           -     -     -     -            X   -   -
set-priority-class             -           -     -     X     -            X   -   -
set-priority-offset            -           -     -     X     -            X   -   -
--keyword---------------QUIC--Ini---TCP--RqCon-RqSes-RqCnt-RsCnt---HTTP--Req-Res-Aft-
set-query                      -           -     -     -     -            X   -   -
set-retries                    -           -     -     X     -            X   -   -
set-src                        -           X     X     X     -            X   -   -
set-src-port                   -           X     X     X     -            X   -   -
set-status                     -           -     -     -     -            -   X   X
set-timeout                    -           -     -     -     -            X   X   -
set-tos (deprecated)           -           X     X     X     X            X   X   -
set-uri                        -           -     -     -     -            X   -   -
set-var                        -           X     X     X     X            X   X   X
set-var-fmt                    -           X     X     X     X            X   X   X
silent-drop                    -           X     X     X     X            X   X   -
strict-mode                    -           -     -     -     -            X   X   X
switch-mode                    -           -     -     X     -            -   -   -
tarpit                         -           -     -     -     -            X   -   -
track-sc0                      -           X     X     X     -            X   X   -
track-sc1                      -           X     X     X     -            X   X   -
track-sc2                      -           X     X     X     -            X   X   -
unset-var                      -           X     X     X     X            X   X   X
use-service                    -           -     -     X     -            X   -   -
wait-for-body                  -           -     -     -     -            X   X   -
wait-for-handshake             -           -     -     -     -            X   -   -
--keyword---------------QUIC--Ini---TCP--RqCon-RqSes-RqCnt-RsCnt---HTTP--Req-Res-Aft-


4.4. Alphabetically sorted actions reference
--------------------------------------------

This section provides a detailed description of each action and its usage,
using the same ruleset terminology marking as described in section 4.3 above.


accept
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    X |          X  |   X  |   X  |   X  |         - |  - |  -

  This stops the evaluation of the rules and lets the request or response pass
  the check. This action is final, i.e. no further rules from the same rule set
  are evaluated for the current section. There is no difference between this
  and the "allow" action except that for historical compatibility, "accept" is
  used for TCP and QUIC rules and "allow" for HTTP rules. See also the "allow"
  action below.


add-acl(<file-name>) <key fmt>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  X |  -

  This is used to add a new entry into an ACL. The ACL must be loaded from a
  file (even a dummy empty file). The file name of the ACL to be updated is
  passed between parentheses. It takes one argument: <key fmt>, which follows
  Custom log format rules described in section 8.2.6, to collect content of the
  new entry. It performs a lookup in the ACL before insertion, to avoid
  duplicated (or more) values. It is the equivalent of the "add acl" command
  from the stats socket, but can be triggered by an HTTP request.


add-header <name> <fmt>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  X |  X

  This appends an HTTP header field whose name is specified in <name> and
  whose value is defined by <fmt> which follows the Custom log format rules
  (see Custom log format in section 8.2.6). This is particularly useful to pass
  connection-specific information to the server (e.g. the client's SSL
  certificate), or to combine several headers into one. This rule is not final,
  so it is possible to add other similar rules. Note that header addition is
  performed immediately, so one rule might reuse the resulting header from a
  previous rule.


allow
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  X |  X

  This stops the evaluation of the rules and lets the request pass the check.
  This action is final, i.e. no further rules from the same rule set are
  evaluated for the current section. There is no difference between this and
  the "accept" action except that for historical compatibility, "accept" is
  used for TCP rules and "allow" for HTTP rules. See also the "accept" action
  above.


attach-srv <srv> [name <expr>] [ EXPERIMENTAL ]
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   X  |   -  |   -  |          - |  - |  -

  This is used to intercept the connection after proper HTTP/2 establishment.
  The connection is reversed to the backend side and inserted into the idle
  pool of server <srv>. This may only be used with servers having an 'rhttp@'
  address.

  The connection is inserted into the server idle pool with a name defined by
  the result of the <expr> evaluation. This is the name that will be matched
  against by requests subject to "pool-conn-name" or "sni" parameter. See
  "http-reuse" for more details.

  Reverse HTTP is currently still in active development. Configuration
  mechanism may change in the future. For this reason it is internally marked
  as experimental, meaning that "expose-experimental-directives" must appear on
  a line before this directive.

  Note that a very similar but independent protocol is under development. See
  https://www.ietf.org/archive/id/draft-bt-httpbis-reverse-http-00.html.

auth [realm <realm>]
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  - |  -

  This stops the evaluation of the rules and immediately responds with an
  HTTP 401 or 407 error code to invite the user to present a valid user name
  and password. No further "http-request" rules are evaluated. An optional
  "realm" parameter is supported, it sets the authentication realm that is
  returned with the response (typically the application's name).

  The corresponding proxy's error message is used. It may be customized using
  an "errorfile" or an "http-error" directive. For 401 responses, all
  occurrences of the WWW-Authenticate header are removed and replaced by a new
  one with a basic authentication challenge for realm "<realm>". For 407
  responses, the same is done on the Proxy-Authenticate header. If the error
  message must not be altered, consider to use "http-request return" rule
  instead.

  Example:
        acl auth_ok http_auth_group(L1) G1
        http-request auth unless auth_ok


cache-store <name>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          - |  X |  -

  Store an http-response within the cache. The storage of the response headers
  is done at this step, which means you can use others http-response actions
  to modify headers before or after the storage of the response. This action
  is responsible for the setup of the cache storage filter.

  See section 6.2 about cache setup.


cache-use <name>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  - |  -

  Try to deliver a cached object from the cache <name>. This directive is also
  mandatory to store the cache as it calculates the cache hash. If you want to
  use a condition for both storage and delivering that's a good idea to put it
  after this one.

  See section 6.2 about cache setup.


capture <sample> [ len <length> | id <id> ]
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   X  |   -  |          X |  X |  X

  This captures sample expression <sample> from the request or response buffer,
  and converts it to a string of at most <len> characters. The resulting string
  is stored into the next "capture" slot (either request or response), so it
  will possibly appear next to some captured HTTP headers. It will then
  automatically appear in the logs, and it will be possible to extract it using
  sample fetch methods to feed it into headers or anything. The length should
  be limited given that this size will be allocated for each capture during the
  whole stream life. Note that the length is only usable with "http-request"
  rules. Please check section 7.3 (Fetching samples), "capture request header"
  and "capture response header" for more information.

  If the keyword "id" is used instead of "len", the action tries to store the
  captured string in a previously declared capture slot. This is useful to run
  captures in backends. The slot id can be declared by a previous directive
  "http-request capture" or with the "declare capture" keyword.

  When using this action in a backend, please double check that the relevant
  frontend(s) have the required capture slots otherwise, this rule will be
  ignored at run time. This can't be detected at configuration parsing time due
  to HAProxy's ability to dynamically resolve backend name at runtime.


close
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   X  |          - |  - |  -

  This is used to immediately close the connection with the server. No further
  "tcp-response content" rules are evaluated. The main purpose of this action
  is to force a connection to be finished between a client and a server after
  an exchange when the application protocol expects some long time outs to
  elapse first. The goal is to eliminate idle connections which take
  significant resources on servers with certain protocols.


del-acl(<file-name>) <key fmt>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  X |  -

  This is used to delete an entry from an ACL. The ACL must be loaded from a
  file (even a dummy empty file). The file name of the ACL to be updated is
  passed between parentheses. It takes one argument: <key fmt>, which follows
  Custom log format rules of section 8.2.6, to collect content of the entry to
  delete.  It is the equivalent of the "del acl" command from the stats socket,
  but can be triggered by an HTTP request or response.


del-header <name> [ -m <meth> ]
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  X |  X

  This removes all HTTP header fields whose name is specified in <name>. <meth>
  is the matching method, applied on the header name. Supported matching methods
  are "str" (exact match), "beg" (prefix match), "end" (suffix match), "sub"
  (substring match) and "reg" (regex match). If not specified, exact matching
  method is used.


del-map(<map-name>) <key fmt>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  X |  X

  This is used to delete an entry from a MAP. <map-name> must follow the format
  described in 2.7. about name format for maps and ACLs. The name of the MAP to
  be updated is passed between parentheses. It takes one argument: <key fmt>,
  which follows Custom log format rules of section 8.2.6, to collect content of
  the entry to delete.  It takes one argument: "file name" It is the equivalent
  of the "del map" command from the stats socket, but can be triggered by an
  HTTP request or response.


deny [ { status | deny_status } <code> ] [ content-type <type> ]
     [ { default-errorfiles | errorfile <file> | errorfiles <name> |
       file <file> | lf-file <file> | string <str> | lf-string <fmt> } ]
     [ hdr <name> <fmt> ]*
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  X |  -

  This stops the evaluation of the rules and immediately rejects the request or
  response. By default an HTTP 403 error is returned for requests, and 502 for
  responses, but the returned response may be customized using same syntax as
  for the "return" action. Thus, see "return" below for details. For
  compatibility purposes, when no argument is defined, or only "deny_status",
  the argument "default-errorfiles" is implied. It means "deny [deny_status
  <status>]" is an alias of "deny [status <status>] default-errorfiles". This
  action is final, i.e. no further rules from the same rule set are evaluated
  for the current section. See also the "return" action for the advanced
  syntax.


dgram-drop
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    X |          -  |   -  |   -  |   -  |          - |  - |  -

  This silently ignores the reception of a QUIC initial packet which otherwise
  would have resulted in a new QUIC connection instantiation and its SSL
  handshake execution.


disable-l7-retry
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  - |  -

  This disables any attempt to retry the request if it fails for any other
  reason than a connection failure. This can be useful for example to make
  sure POST requests aren't retried on failure.

do-log
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    X |          X  |   X  |   X  |   X  |          X |  X |  X

  This action manually triggers a log emission on the proxy. This means
  log options on the proxy will be considered (including formatting options
  such as "log-format"), but it will not interfere with the logs automatically
  generated by the proxy during transaction handling. It currently doesn't
  support any argument, though extensions may appear in future versions.

  Using "log-profile", it is possible to precisely describe how the log should
  be emitted for each of the available contexts where the action may be used.
  That is, 'on' keyword followed by of the following values: 'quic-init',
  'tcp-req-conn', 'tcp-req-sess', 'tcp-req-cont', 'tcp-res-cont', 'http-req',
  'http-res', 'http-after-res'.

  Also, they will be properly reported when using "%OG" logformat alias.

  Example:
    log-profile myprof
      on tcp-req-conn format "Connect: %ci"

    frontend myfront
      log stdout format rfc5424 profile myprof local0
      log-format "log generated using proxy logformat, from '%OG'"
      tcp-request connection do-log             #uses special log-profile format
      tcp-request content do-log                #uses proxy logformat

do-resolve(<var>,<resolvers>[,ipv4|ipv6]) <expr>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   X  |   -  |          X |  - |  -

  This action performs a DNS resolution of the output of <expr> and stores
  the result in the variable <var>. It uses the DNS resolvers section
  pointed by <resolvers>.
  It is possible to choose a resolution preference using the optional
  arguments 'ipv4' or 'ipv6'. See also the global "dns-accept-family" keyword
  to enforce strict usage of a specific family.

  When performing the DNS resolution, the client side connection is on
  pause waiting till the end of the resolution.
  If an IP address can be found, it is stored into <var>. If any kind of
  error occurs, then <var> is not set.
  One can use this action to discover a server IP address at run time and
  based on information found in the request (IE a Host header).
  If this action is used to find the server's IP address (using the
  "set-dst" action), then the server IP address in the backend must be set
  to 0.0.0.0. The do-resolve action takes an host-only parameter, any port must
  be removed from the string.

  Example:
    resolvers mydns
      nameserver local 127.0.0.53:53
      nameserver google 8.8.8.8:53
      timeout retry   1s
      hold valid 10s
      hold nx 3s
      hold other 3s
      hold obsolete 0s
      accepted_payload_size 8192

    frontend fe
      bind 10.42.0.1:80
      http-request do-resolve(txn.myip,mydns,ipv4) hdr(Host),host_only
      http-request capture var(txn.myip) len 40

      # return 503 when the variable is not set,
      # which mean DNS resolution error
      use_backend b_503 unless { var(txn.myip) -m found }

      default_backend be

    backend b_503
      # dummy backend used to return 503.
      # one can use the errorfile directive to send a nice
      # 503 error page to end users

    backend be
      # rule to prevent HAProxy from reconnecting to services
      # on the local network (forged DNS name used to scan the network)
      http-request deny if { var(txn.myip) -m ip 127.0.0.0/8 10.0.0.0/8 }
      http-request set-dst var(txn.myip)
      server clear 0.0.0.0:0

  NOTE: Don't forget to set the "protection" rules to ensure HAProxy won't
        be used to scan the network or worst won't loop over itself...


early-hint <name> <fmt>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  - |  -

  This is used to build an HTTP 103 Early Hints response prior to any other one.
  This appends an HTTP header field to this response whose name is specified in
  <name> and whose value is defined by <fmt> which follows the Custom Log
  Format rules (see Custom log format in section 8.2.6). This is particularly
  useful to pass to the client some Link headers to preload resources required
  to render the HTML documents.

  See RFC 8297 for more information.


expect-netscaler-cip layer4
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          X  |   -  |   -  |   -  |          - |  - |  -

  This configures the client-facing connection to receive a NetScaler Client IP
  insertion protocol header before any byte is read from the socket.  This is
  equivalent to having the "accept-netscaler-cip" keyword on the "bind" line,
  except that using the TCP rule allows the PROXY protocol to be accepted only
  for certain IP address ranges using an ACL. This is convenient when multiple
  layers of load balancers are passed through by traffic coming from public
  hosts.


expect-proxy layer4
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          X  |   -  |   -  |   -  |          - |  - |  -

  This configures the client-facing connection to receive a PROXY protocol
  header before any byte is read from the socket. This is equivalent to having
  the "accept-proxy" keyword on the "bind" line, except that using the TCP rule
  allows the PROXY protocol to be accepted only for certain IP address ranges
  using an ACL. This is convenient when multiple layers of load balancers are
  passed through by traffic coming from public hosts.


normalize-uri <normalizer>
normalize-uri fragment-encode
normalize-uri fragment-strip
normalize-uri path-merge-slashes
normalize-uri path-strip-dot
normalize-uri path-strip-dotdot [ full ]
normalize-uri percent-decode-unreserved [ strict ]
normalize-uri percent-to-uppercase [ strict ]
normalize-uri query-sort-by-name
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  - |  -

  Performs normalization of the request's URI.

  URI normalization in HAProxy 2.4 is currently available as an experimental
  technical preview. As such, it requires the global directive
  'expose-experimental-directives' first to be able to invoke it. You should be
  prepared that the behavior of normalizers might change to fix possible
  issues, possibly breaking proper request processing in your infrastructure.

  Each normalizer handles a single type of normalization to allow for a
  fine-grained selection of the level of normalization that is appropriate for
  the supported backend.

  As an example the "path-strip-dotdot" normalizer might be useful for a static
  fileserver that directly maps the requested URI to the path within the local
  filesystem. However it might break routing of an API that expects a specific
  number of segments in the path.

  It is important to note that some normalizers might result in unsafe
  transformations for broken URIs. It might also be possible that a combination
  of normalizers that are safe by themselves results in unsafe transformations
  when improperly combined.

  As an example the "percent-decode-unreserved" normalizer might result in
  unexpected results when a broken URI includes bare percent characters. One
  such a broken URI is "/%%36%36" which would be decoded to "/%66" which in
  turn is equivalent to "/f". By specifying the "strict" option requests to
  such a broken URI would safely be rejected.

  The following normalizers are available:

  - fragment-encode: Encodes "#" as "%23".

      The "fragment-strip" normalizer should be preferred, unless it is known
      that broken clients do not correctly encode '#' within the path component.

      Example:
      - /#foo  -> /%23foo

  - fragment-strip: Removes the URI's "fragment" component.

      According to RFC 3986#3.5 the "fragment" component of an URI should not
      be sent, but handled by the User Agent after retrieving a resource.

      This normalizer should be applied first to ensure that the fragment is
      not interpreted as part of the request's path component.

      Example:
      - /#foo  -> /

  - path-strip-dot: Removes "/./" segments within the "path" component
      (RFC 3986#6.2.2.3).

      Segments including percent encoded dots ("%2E") will not be detected. Use
      the "percent-decode-unreserved" normalizer first if this is undesired.

      Example:
      - /.            -> /
      - /./bar/       -> /bar/
      - /a/./a        -> /a/a
      - /.well-known/ -> /.well-known/ (no change)

  - path-strip-dotdot: Normalizes "/../" segments within the "path" component
      (RFC 3986#6.2.2.3).

      This merges segments that attempt to access the parent directory with
      their preceding segment.

      Empty segments do not receive special treatment. Use the "merge-slashes"
      normalizer first if this is undesired.

      Segments including percent encoded dots ("%2E") will not be detected. Use
      the "percent-decode-unreserved" normalizer first if this is undesired.

      Example:
      - /foo/../     -> /
      - /foo/../bar/ -> /bar/
      - /foo/bar/../ -> /foo/
      - /../bar/     -> /../bar/
      - /bar/../../  -> /../
      - /foo//../    -> /foo/
      - /foo/%2E%2E/ -> /foo/%2E%2E/

      If the "full" option is specified then "../" at the beginning will be
      removed as well:

      Example:
      - /../bar/     -> /bar/
      - /bar/../../  -> /

  - path-merge-slashes: Merges adjacent slashes within the "path" component
      into a single slash.

      Example:
      - //        -> /
      - /foo//bar -> /foo/bar

  - percent-decode-unreserved: Decodes unreserved percent encoded characters to
      their representation as a regular character (RFC 3986#6.2.2.2).

      The set of unreserved characters includes all letters, all digits, "-",
      ".", "_", and "~".

      Example:
      - /%61dmin       -> /admin
      - /foo%3Fbar=baz -> /foo%3Fbar=baz (no change)
      - /%%36%36       -> /%66           (unsafe)
      - /%ZZ           -> /%ZZ

      If the "strict" option is specified then invalid sequences will result
      in a HTTP 400 Bad Request being returned.

      Example:
      - /%%36%36 -> HTTP 400
      - /%ZZ     -> HTTP 400

  - percent-to-uppercase: Uppercases letters within percent-encoded sequences
      (RFC 3986#6.2.2.1).

      Example:
      - /%6f -> /%6F
      - /%zz -> /%zz

      If the "strict" option is specified then invalid sequences will result
      in a HTTP 400 Bad Request being returned.

      Example:
      - /%zz -> HTTP 400

  - query-sort-by-name: Sorts the query string parameters by parameter name.
      Parameters are assumed to be delimited by '&'. Shorter names sort before
      longer names and identical parameter names maintain their relative order.

      Example:
      - /?c=3&a=1&b=2         -> /?a=1&b=2&c=3
      - /?aaa=3&a=1&aa=2      -> /?a=1&aa=2&aaa=3
      - /?a=3&b=4&a=1&b=5&a=2 -> /?a=3&a=1&a=2&b=4&b=5

pause { <timeout> | <expr> }
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  X |  -

  This suspends the message analysis for the sepcified number of milliseconds.
  The timeout can be specified in milliseconds or with any other unit if the
  number is suffixed by the unit as explained at the top of this document. It
  is also possible to write an expression which must return a number
  interpreted as a timeout in milliseconds. If the expression evaluation fails
  or if it returns an invalid value, the action is ignored and the evaluation
  continues.

  This action may be used for debugging purpose. But it could also be used to
  slow down some clients based on specific criteria. For instance, it is
  possible to slow down clients if their requests rate is too high, by tracking
  them via a "track-sc" rule.

redirect <rule>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  X |  -

  This performs an HTTP redirection based on a redirect rule. This is exactly
  the same as the "redirect" statement except that it inserts a redirect rule
  which is processed in the middle of other "http-request" or "http-response"
  rules and that these rules use the Custom log format. For responses, only
  the "location" type of redirect is permitted. In addition, when a redirect is
  performed during a response, the transfer from the server to HAProxy is
  interrupted so that no payload can be forwarded to the client. This may cause
  some connections to be closed on HTTP/1. This action is final, i.e. no
  further rules from the same rule set are evaluated for the current section.
  See the "redirect" keyword for the rule's syntax.


reject
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    X |          X  |   X  |   X  |   X  |          X |  - |  -

  This stops the evaluation of the rules and immediately closes the connection
  without sending any response. For HTTP rules, it acts similarly to the
  "tcp-request content reject" rules. It can be useful to force an immediate
  connection closure on HTTP/2 connections.

  In "tcp-request connection" rules, rejected connections do not even become a
  session, which is why they are accounted separately for in the stats, as
  "denied connections". They are not considered for the session rate-limit and
  are not logged either. The reason is that these rules should only be used to
  filter extremely high connection rates such as the ones encountered during a
  massive DDoS attack. Under these extreme conditions, the simple action of
  logging each event would make the system collapse and would considerably
  lower the filtering capacity. If logging is absolutely desired, then
  "tcp-request content" rules should be used instead, as "tcp-request session"
  rules will not log either.

  When used in "tcp-response content" rules, the server connection will be
  closed and the response aborted. This is generally used to prevent sensitive
  information from leaking, typically after inspecting contents in conjunction
  with the "wait-for-body" action.

  This action can also be used in "quic-initial" rules. The newly opened QUIC
  connection is immediately closed without any SSL handshake processing and the
  client is notified via a CONNECTION_REFUSED error code.


replace-header <name> <match-regex> <replace-fmt>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  X |  X

  This matches the value of all occurrences of header field <name> against
  <match-regex>. Matching is performed case-sensitively. Matching values are
  completely replaced by <replace-fmt>. Format characters are allowed in
  <replace-fmt> and work like <fmt> arguments in "http-request add-header".
  Standard back-references using the backslash ('\') followed by a number are
  supported.

  This action acts on whole header lines, regardless of the number of values
  they may contain. Thus it is well-suited to process headers naturally
  containing commas in their value, such as If-Modified-Since or Set-Cookie.
  Headers that contain a comma-separated list of values, such as Accept, or
  Cache-Control should be processed using the "replace-value" action instead.
  See also the "replace-value" action.

  Example:
    http-request replace-header Cookie foo=([^;]*);(.*) foo=\1;ip=%bi;\2

    # applied to:
    Cookie: foo=foobar; expires=Tue, 14-Jun-2016 01:40:45 GMT;

    # outputs:
    Cookie: foo=foobar;ip=192.168.1.20; expires=Tue, 14-Jun-2016 01:40:45 GMT;

    # assuming the backend IP is 192.168.1.20

    http-request replace-header User-Agent curl foo

    # applied to:
    User-Agent: curl/7.47.0

    # outputs:
    User-Agent: foo

  Example:
    http-response replace-header Set-Cookie (C=[^;]*);(.*) \1;ip=%bi;\2

    # applied to:
    Set-Cookie: C=1; expires=Tue, 14-Jun-2016 01:40:45 GMT

    # outputs:
    Set-Cookie: C=1;ip=192.168.1.20; expires=Tue, 14-Jun-2016 01:40:45 GMT

    # assuming the backend IP is 192.168.1.20.


replace-path <match-regex> <replace-fmt>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  - |  -

  This works like "replace-header" except that it works on the request's path
  component instead of a header. The path component starts at the first '/'
  after an optional scheme+authority and ends before the question mark. Thus,
  the replacement does not modify the scheme, the authority and the
  query-string.

  It is worth noting that regular expressions may be more expensive to evaluate
  than certain ACLs, so rare replacements may benefit from a condition to avoid
  performing the evaluation at all if it does not match.

  Example:
    # prefix /foo : turn /bar?q=1 into /foo/bar?q=1 :
    http-request replace-path (.*) /foo\1

    # strip /foo : turn /foo/bar?q=1 into /bar?q=1
    http-request replace-path /foo/(.*) /\1
    # or more efficient if only some requests match :
    http-request replace-path /foo/(.*) /\1 if { url_beg /foo/ }


replace-pathq <match-regex> <replace-fmt>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  - |  -

  This does the same as "http-request replace-path" except that the path
  contains the query-string if any is present. Thus, the path and the
  query-string are replaced.

  Example:
    # suffix /foo : turn /bar?q=1 into /bar/foo?q=1 :
    http-request replace-pathq ([^?]*)(\?(.*))? \1/foo\2


replace-uri <match-regex> <replace-fmt>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  - |  -

  This works like "replace-header" except that it works on the request's URI part
  instead of a header. The URI part may contain an optional scheme, authority or
  query string. These are considered to be part of the value that is matched
  against.

  It is worth noting that regular expressions may be more expensive to evaluate
  than certain ACLs, so rare replacements may benefit from a condition to avoid
  performing the evaluation at all if it does not match.

  IMPORTANT NOTE: historically in HTTP/1.x, the vast majority of requests sent
  by browsers use the "origin form", which differs from the "absolute form" in
  that they do not contain a scheme nor authority in the URI portion. Mostly
  only requests sent to proxies, those forged by hand and some emitted by
  certain applications use the absolute form. As such, "replace-uri" usually
  works fine most of the time in HTTP/1.x with rules starting with a "/". But
  with HTTP/2, clients are encouraged to send absolute URIs only, which look
  like the ones HTTP/1 clients use to talk to proxies. Such partial replace-uri
  rules may then fail in HTTP/2 when they work in HTTP/1. Either the rules need
  to be adapted to optionally match a scheme and authority, or replace-path
  should be used.

  Example:
    # rewrite all "http" absolute requests to "https":
    http-request replace-uri ^http://(.*) https://\1

    # prefix /foo : turn /bar?q=1 into /foo/bar?q=1 :
    http-request replace-uri ([^/:]*://[^/]*)?(.*) \1/foo\2


replace-value <name> <match-regex> <replace-fmt>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  X |  X

  This works like "replace-header" except that it matches the regex against
  every comma-delimited value of the header field <name> instead of the
  entire header. This is suited for all headers which are allowed to carry
  more than one value. An example could be the Accept request header, or
  Cache-Control for requests or responses.

  Example:
    http-request replace-value X-Forwarded-For ^192\.168\.(.*)$ 172.16.\1

    # applied to:
    X-Forwarded-For: 192.168.10.1, 192.168.13.24, 10.0.0.37

    # outputs:
    X-Forwarded-For: 172.16.10.1, 172.16.13.24, 10.0.0.37

  Example:
    http-after-response replace-value Cache-control ^public$ private

    # applied to:
    Cache-Control: max-age=3600, public

    # outputs:
    Cache-Control: max-age=3600, private


return [ status <code> ] [ content-type <type> ]
       [ { default-errorfiles | errorfile <file> | errorfiles <name> |
         file <file> | lf-file <file> | string <str> | lf-string <fmt> } ]
       [ hdr <name> <fmt> ]*
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  X |  -

  This stops the evaluation of the rules and immediately returns a response. The
  default status code used for the response is 200. It can be optionally
  specified as an arguments to "status". The response content-type may also be
  specified as an argument to "content-type". Finally the response itself may
  be defined. It can be a full HTTP response specifying the errorfile to use,
  or the response payload specifying the file or the string to use. These rules
  are followed to create the response :

  * If neither the errorfile nor the payload to use is defined, a dummy
    response is returned. Only the "status" argument is considered. It can be
    any code in the range [200, 599]. The "content-type" argument, if any, is
    ignored.

  * If "default-errorfiles" argument is set, the proxy's errorfiles are
    considered.  If the "status" argument is defined, it must be one of the
    status code handled by HAProxy (200, 400, 403, 404, 405, 408, 410, 413,
    414, 425, 429, 431, 500, 501, 502, 503, and 504). The "content-type"
    argument, if any, is ignored.

  * If a specific errorfile is defined, with an "errorfile" argument, the
    corresponding file, containing a full HTTP response, is returned. Only the
    "status" argument is considered. It must be one of the status code handled
    by HAProxy (200, 400, 403, 404, 405, 408, 410, 413, 414, 425, 429, 431,
    500, 501, 502, 503, and 504). The "content-type" argument, if any, is
    ignored.

  * If an http-errors section is defined, with an "errorfiles" argument, the
    corresponding file in the specified http-errors section, containing a full
    HTTP response, is returned. Only the "status" argument is considered. It
    must be one of the status code handled by HAProxy (200, 400, 403, 404, 405,
    408, 410, 413, 414, 425, 429, 431, 500, 501, 502, 503, and 504).
    The "content-type" argument, if any, is ignored.

  * If a "file" or a "lf-file" argument is specified, the file's content is
    used as the response payload. If the file is not empty, its content-type
    must be set as argument to "content-type". Otherwise, any "content-type"
    argument is ignored. With a "lf-file" argument, the file's content is
    evaluated as a Custom log format (see section 8.2.6). With a "file"
    argument, it is considered as a raw content.

  * If a "string" or "lf-string" argument is specified, the defined string is
    used as the response payload. The content-type must always be set as
    argument to "content-type". With a "lf-string" argument, the string is
    evaluated as a Custom log format (see section 8.2.6). With a "string"
    argument, it is considered as a raw string.

  When the response is not based on an errorfile, it is possible to append HTTP
  header fields to the response using "hdr" arguments. Otherwise, all "hdr"
  arguments are ignored. For each one, the header name is specified in <name>
  and its value is defined by <fmt> which follows the Custom log format rules
  described in section 8.2.6.

  Note that the generated response must be smaller than a buffer. And to avoid
  any warning, when an errorfile or a raw file is loaded, the buffer space
  reserved for the headers rewriting should also be free.

  This action is final, i.e. no further rules from the same rule set are
  evaluated for the current section.

  Example:
    http-request return errorfile /etc/haproxy/errorfiles/200.http \
        if { path /ping }

    http-request return content-type image/x-icon file /var/www/favicon.ico  \
        if { path /favicon.ico }

    http-request return status 403 content-type text/plain    \
        lf-string "Access denied. IP %[src] is blacklisted."  \
        if { src -f /etc/haproxy/blacklist.lst }


sc-add-gpc(<idx>,<sc-id>) { <int> | <expr> }
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          X  |   X  |   X  |   X  |          X |  X |  X

  This action increments the General Purpose Counter at the index <idx> of the
  array associated to the sticky counter designated by <sc-id> by the value of
  either integer <int> or the integer evaluation of expression <expr>. Integers
  and expressions are limited to unsigned 32-bit values. If an error occurs,
  this action silently fails and the actions evaluation continues. <idx> is an
  integer between 0 and 99 and <sc-id> is an integer between 0 and 2. It also
  silently fails if the there is no GPC stored at this index. The entry in the
  table is refreshed even if the value is zero. The 'gpc_rate' is automatically
  adjusted to reflect the average growth rate of the gpc value.

  This action applies only to the 'gpc' and 'gpc_rate' array data_types (and
  not to the legacy 'gpc0', 'gpc1', 'gpc0_rate' nor 'gpc1_rate' data_types).
  There is no equivalent function for legacy data types, but if the value is
  always 1, please see 'sc-inc-gpc()', 'sc-inc-gpc0()' and 'sc-inc-gpc1()'.
  There is no way to decrement the value either, but it is possible to store
  exact values in a General Purpose Tag using 'sc-set-gpt()' instead.

  The main use of this action is to count scores or total volumes (e.g.
  estimated danger per source IP reported by the server or a WAF, total
  uploaded bytes, etc).


sc-inc-gpc(<idx>,<sc-id>)
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          X  |   X  |   X  |   X  |          X |  X |  X

  This actions increments the General Purpose Counter at the index <idx> of the
  array associated to the sticky counter designated by <sc-id>. If an error
  occurs, this action silently fails and the actions evaluation continues.
  <idx> is an integer between 0 and 99 and <sc-id> is an integer between 0 and
  2. It also silently fails if the there is no GPC stored at this index. This
  action applies only to the 'gpc' and 'gpc_rate' array data_types (and not to
  the legacy 'gpc0', 'gpc1', 'gpc0_rate' nor 'gpc1_rate' data_types).


sc-inc-gpc0(<sc-id>)
sc-inc-gpc1(<sc-id>)
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          X  |   X  |   X  |   X  |          X |  X |  X

  This actions increments the GPC0 or GPC1 counter according with the sticky
  counter designated by <sc-id>. If an error occurs, this action silently fails
  and the actions evaluation continues.


sc-set-gpt(<idx>,<sc-id>) { <int> | <expr> }
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          X  |   X  |   X  |   X  |          X |  X |  X

  This action sets the 32-bit unsigned GPT at the index <idx> of the array
  associated to the sticky counter designated by <sc-id> at the value of
  <int>/<expr>. The expected result is a boolean.

  If an error occurs, this action silently fails and the actions evaluation
  continues. <idx> is an integer between 0 and 99 and <sc-id> is an integer
  between 0 and 2. It also silently fails if the there is no GPT stored
  at this index.

  This action applies only to the 'gpt' array data_type (and not to the
  legacy 'gpt0' data-type).


sc-set-gpt0(<sc-id>) { <int> | <expr> }
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          X  |   X  |   X  |   X  |          X |  X |  X

  This action sets the 32-bit unsigned GPT0 tag according to the sticky counter
  designated by <sc-id> and the value of <int>/<expr>. The expected result is a
  boolean. If an error occurs, this action silently fails and the actions
  evaluation continues. This action is an alias for "sc-set-gpt(0,<sc-id>)".
  See also the "sc-set-gpt" action.


send-retry
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    X |          -  |   -  |   -  |   -  |          - |  - |  -

  This action forces the emission of a Retry packet in response to a client
  Initial packet without token. This is useful to ensure client address is
  validated prior to instantiating any connection elements and starting the
  handshake.


send-spoe-group <engine-name> <group-name>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   X  |   X  |          X |  X |  -

  This action is used to trigger sending of a group of SPOE messages. To do so,
  the SPOE engine used to send messages must be defined, as well as the SPOE
  group to send. Of course, the SPOE engine must refer to an existing SPOE
  filter. If not engine name is provided on the SPOE filter line, the SPOE
  agent name must be used.

  Arguments:
    <engine-name>  The SPOE engine name.

    <group-name>   The SPOE group name as specified in the engine
                   configuration.


set-bandwidth-limit <name> [limit {<expr> | <size>}] [period {<expr> | <time>}]
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   X  |   X  |          X |  X |  -

  This action is used to enable the bandwidth limitation filter <name>, either
  on the upload or download direction depending on the filter type. Custom
  limit and period may be defined, if and only if <name> references a
  per-stream bandwidth limitation filter. When a set-bandwidth-limit rule is
  executed, it first resets all settings of the filter to their defaults prior
  to enabling it. As a consequence, if several "set-bandwidth-limit" actions
  are executed for the same filter, only the last one is considered. Several
  bandwidth limitation filters can be enabled on the same stream.

  Note that this action cannot be used in a defaults section because bandwidth
  limitation filters cannot be defined in defaults sections. In addition, only
  the HTTP payload transfer is limited. The HTTP headers are not considered.

  Arguments:
    <expr>  Is a standard HAProxy expression formed by a sample-fetch followed
            by some converters. The result is converted to an integer. It is
            interpreted as a size in bytes for the "limit" parameter and as a
            duration in milliseconds for the "period" parameter.

    <size>  Is a number. It follows the HAProxy size format and is expressed in
            bytes.

    <time>  Is a number. It follows the HAProxy time format and is expressed in
            milliseconds.

  Example:
    http-request set-bandwidth-limit global-limit
    http-request set-bandwidth-limit my-limit limit 1m period 10s

  See section 9.7 about bandwidth limitation filter setup.


set-bc-mark { <mark> | <expr> }
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   X  |   -  |          X |  - |  -

  This is used to set the Netfilter/IPFW MARK on the backend connection (all
  packets sent to the server) to the value passed in <mark> or <expr> on
  platforms which support it. This value is an unsigned 32 bit value which can
  be matched by netfilter/ipfw and by the routing table or monitoring the
  packets through DTrace. <mark> can be expressed both in decimal or hexadecimal
  format (prefixed by "0x"). Alternatively, <expr> can be used: it is a standard
  HAProxy expression formed by a sample-fetch followed by some converters which
  must resolve to integer type. This action can be useful to force certain
  packets to take a different route (for example a cheaper network path for bulk
  downloads). This works on Linux kernels 2.6.32 and above and requires admin
  privileges, as well on FreeBSD and OpenBSD. The mark will be set for the whole
  duration of the backend/server connection (from connect to close).


set-bc-tos { <tos> | <expr> }
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   X  |   -  |          X |  - |  -

  This is used to set the TOS or DSCP field value on the backend connection
  (all packets sent to the server) to the value passed in <tos> or <expr> on
  platforms which support this. This value represents the whole 8 bits of the
  IP TOS field. Note that only the 6 higher bits are used in DSCP or TOS, and
  the two lower bits are always 0. Alternatively, <expr> can be used: it is a
  standard HAProxy expression formed by a sample-fetch followed by some
  converters which must resolve to integer type. This action can be used to
  adjust some routing behavior on inner routers based on some information from
  the request. The tos will be set for the whole duration of the backend/server
  connection (from connect to close).

  See RFC 2474, 2597, 3260 and 4594 for more information.


set-dst <expr>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          X  |   X  |   X  |   -  |          X |  - |  -

  This is used to set the destination IP address to the value of specified
  expression. Useful when a proxy in front of HAProxy rewrites destination IP,
  but provides the correct IP in a HTTP header; or you want to mask the IP for
  privacy. If you want to connect to the new address/port, use '0.0.0.0:0' as a
  server address in the backend.

  Arguments:
    <expr>  Is a standard HAProxy expression formed by a sample-fetch followed
            by some converters.

  Example:
    http-request set-dst hdr(x-dst)
    http-request set-dst dst,ipmask(24)

  When possible, set-dst preserves the original destination port as long as the
  address family allows it, otherwise the destination port is set to 0.


set-dst-port <expr>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          X  |   X  |   X  |   -  |          X |  - |  -

  This is used to set the destination port address to the value of specified
  expression. If you want to connect to the new address/port, use '0.0.0.0:0'
  as a server address in the backend.

  Arguments:
    <expr>  Is a standard HAProxy expression formed by a sample-fetch
            followed by some converters.

  Example:
    http-request set-dst-port hdr(x-port)
    http-request set-dst-port int(4000)

  When possible, set-dst-port preserves the original destination address as
  long as the address family supports a port, otherwise it forces the
  destination address to IPv4 "0.0.0.0" before rewriting the port.


set-fc-mark { <mark> | <expr> }
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          X  |   X  |   X  |   X  |          X |  X |  -

  This is used to set the Netfilter/IPFW MARK on all packets sent to the client
  to the value passed in <mark> or <expr> on platforms which support it. This
  value is an unsigned 32 bit value which can be matched by netfilter/ipfw and
  by the routing table or monitoring the packets through DTrace. <mark> can be
  expressed both in decimal or hexadecimal format (prefixed by "0x").
  Alternatively, <expr> can be used: it is a standard HAProxy expression formed
  by a sample-fetch followed by some converters which must resolve to integer
  type. This action can be useful to force certain packets to take a different
  route (for example a cheaper network path for bulk downloads). This works on
  Linux kernels 2.6.32 and above and requires admin privileges, as well on
  FreeBSD and OpenBSD.


set-fc-tos { <tos | <expr> }
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          X  |   X  |   X  |   X  |          X |  X |  -

  This is used to set the TOS or DSCP field value of packets sent to the client
  to the value passed in <tos> or <expr> on platforms which support this. This
  value represents the whole 8 bits of the IP TOS field. Note that only the 6
  higher bits are used in DSCP or TOS, and the two lower bits are always 0.
  Alternatively, <expr> can be used: it is a standard HAProxy expression formed
  by a sample-fetch followed by some converters which must resolve to integer
  type. This action can be used to adjust some routing behavior on border
  routers based on some information from the request.

  See RFC 2474, 2597, 3260 and 4594 for more information.


set-header <name> <fmt>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  X |  X

  This does the same as the "add-header" action except that the header is first
  removed if it existed. This is useful when passing security information to
  the server, where the header must not be manipulated by external users, or to
  force certain response headers such as "Server" to hide external information.
  Note that the new value is computed before the removal so it is possible to
  concatenate a value to an existing header.

  Example:
        http-request set-header X-Haproxy-Current-Date %T
        http-request set-header X-SSL                  %[ssl_fc]
        http-request set-header X-SSL-Session_ID       %[ssl_fc_session_id,hex]
        http-request set-header X-SSL-Client-Verify    %[ssl_c_verify]
        http-request set-header X-SSL-Client-DN        %{+Q}[ssl_c_s_dn]
        http-request set-header X-SSL-Client-CN        %{+Q}[ssl_c_s_dn(cn)]
        http-request set-header X-SSL-Issuer           %{+Q}[ssl_c_i_dn]
        http-request set-header X-SSL-Client-NotBefore %{+Q}[ssl_c_notbefore]
        http-request set-header X-SSL-Client-NotAfter  %{+Q}[ssl_c_notafter]


set-log-level <level>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   X  |   X  |          X |  X |  X

  This is used to change the log level of the current request when a certain
  condition is met. Valid levels are the 8 syslog levels (see the "log"
  keyword) plus the special level "silent" which disables logging for this
  request. This rule is not final so the last matching rule wins. This rule
  can be useful to disable health checks coming from another equipment.


set-map(<map-name>) <key fmt> <value fmt>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  X |  X

  This is used to add a new entry into a map. <map-name> must follow the format
  described in 2.7. about name format for maps and ACLs. The name of the MAP to
  be updated is passed between parentheses. It takes 2 arguments: <key fmt>,
  which follows Custom log format rules described in section 8.2.6, used to
  collect map key, and <value fmt>, which follows Custom log format rules, used
  to collect content for the new entry. It performs a lookup in the map before
  insertion, to avoid duplicated (or more) values. It is the equivalent of the
  "set map" command from the stats socket, but can be triggered by an HTTP
  request.


set-mark <mark> (deprecated)
  This is an alias for "set-fc-mark" (which should be used instead).


set-method <fmt>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  - |  -

  This rewrites the request method with the result of the evaluation of format
  string <fmt>. There should be very few valid reasons for having to do so as
  this is more likely to break something than to fix it.


set-nice <nice>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   X  |   X  |          X |  X |  -

  This sets the "nice" factor of the current request/response being processed.
  It only has effect against the other requests being processed at the same
  time.  The default value is 0, unless altered by the "nice" setting on the
  "bind" line. The accepted range is -1024..1024. The higher the value, the
  nicest the request will be. Lower values will make the request more important
  than other ones. This can be useful to improve the speed of some requests, or
  lower the priority of non-important requests. Using this setting without
  prior experimentation can cause some major slowdown.


set-path <fmt>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  - |  -

    This rewrites the request path with the result of the evaluation of format
    string <fmt>. The query string, if any, is left intact. If a scheme and
    authority is found before the path, they are left intact as well. If the
    request doesn't have a path ("*"), this one is replaced with the format.
    This can be used to prepend a directory component in front of a path for
    example. See also "http-request set-query" and "http-request set-uri".

    Example :
      # prepend the host name before the path
      http-request set-path /%[hdr(host)]%[path]


set-pathq <fmt>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  - |  -

  This does the same as "http-request set-path" except that the query-string is
  also rewritten. It may be used to remove the query-string, including the
  question mark (it is not possible using "http-request set-query").


set-priority-class <expr>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   X  |   -  |          X |  - |  -

  This is used to set the queue priority class of the current request.
  The value must be a sample expression which converts to an integer in the
  range -2047..2047. Results outside this range will be truncated.
  The priority class determines the order in which queued requests are
  processed. Lower values have higher priority.


set-priority-offset <expr>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   X  |   -  |          X |  - |  -

  This is used to set the queue priority timestamp offset of the current
  request. The value must be a sample expression which converts to an integer
  in the range -524287..524287. Results outside this range will be truncated.
  When a request is queued, it is ordered first by the priority class, then by
  the current timestamp adjusted by the given offset in milliseconds. Lower
  values have higher priority.
  Note that the resulting timestamp is is only tracked with enough precision
  for 524,287ms (8m44s287ms). If the request is queued long enough to where the
  adjusted timestamp exceeds this value, it will be misidentified as highest
  priority. Thus it is important to set "timeout queue" to a value, where when
  combined with the offset, does not exceed this limit.


set-query <fmt>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  - |  -

  This rewrites the request's query string which appears after the first
  question mark ("?") with the result of the evaluation of format string <fmt>.
  The part prior to the question mark is left intact. If the request doesn't
  contain a question mark and the new value is not empty, then one is added at
  the end of the URI, followed by the new value. If a question mark was
  present, it will never be removed even if the value is empty. This can be
  used to add or remove parameters from the query string.

  See also "http-request set-query" and "http-request set-uri".

  Example:
    # replace "%3D" with "=" in the query string
    http-request set-query %[query,regsub(%3D,=,g)]


set-retries <int> | <epxr>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   X  |   -  |          X |  - |  -

  This action overrides the specified "retries" value for the current stream
  only. It can be an integer value, in the range [0, 100], or an expression
  which must return a integer in the range [0, 100].

  Note that this action is only relevant on the backend side and thus this rule
  is only available for the proxies with backend capability. It is also not
  allowed in "defaults" sections.

  Example:
    tcp-request content set-retries 3
    http-request set-retries var(txn.retries)

set-src <expr>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          X  |   X  |   X  |   -  |          X |  - |  -

  This is used to set the source IP address to the value of specified
  expression. Useful when a proxy in front of HAProxy rewrites source IP, but
  provides the correct IP in a HTTP header; or you want to mask source IP for
  privacy. All subsequent calls to "src" fetch will return this value
  (see example).

  Arguments :
    <expr>  Is a standard HAProxy expression formed by a sample-fetch followed
            by some converters.

  See also "option forwardfor".

  Example:
    http-request set-src hdr(x-forwarded-for)
    http-request set-src src,ipmask(24)

    # After the masking this will track connections
    # based on the IP address with the last byte zeroed out.
    http-request track-sc0 src

  When possible, set-src preserves the original source port as long as the
  address family allows it, otherwise the source port is set to 0.


set-src-port <expr>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          X  |   X  |   X  |   -  |          X |  - |  -

  This is used to set the source port address to the value of specified
  expression.

  Arguments:
    <expr>  Is a standard HAProxy expression formed by a sample-fetch followed
            by some converters.

  Example:
    http-request set-src-port hdr(x-port)
    http-request set-src-port int(4000)

  When possible, set-src-port preserves the original source address as long as
  the address family supports a port, otherwise it forces the source address to
  IPv4 "0.0.0.0" before rewriting the port.


set-status <status> [reason <str>]
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          - |  X |  X

  This replaces the response status code with <status> which must be an integer
  between 100 and 999. Optionally, a custom reason text can be provided defined
  by <str>, or the default reason for the specified code will be used as a
  fallback. Note that the reason string only exists in HTTP/1.x and is ignored
  by other versions of the protocol.

  Example:
    # return "431 Request Header Fields Too Large"
    http-response set-status 431
    # return "503 Slow Down", custom reason
    http-response set-status 503 reason "Slow Down".


set-timeout { client | server | tunnel } { <timeout> | <expr> }
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  X |  -

  This action overrides the specified "client", "server" or "tunnel" timeout
  for the current stream only. The timeout can be specified in milliseconds or
  with any other unit if the number is suffixed by the unit as explained at the
  top of this document. It is also possible to write an expression which must
  return a number interpreted as a timeout in milliseconds.

  Note that the server/tunnel timeouts are only relevant on the backend side
  and thus this rule is only available for the proxies with backend
  capabilities. Likewise, client timeout is only relevant for frontend side.
  Also the timeout value must be non-null to obtain the expected results.

  Example:
    http-request set-timeout tunnel 5s
    http-request set-timeout server req.hdr(host),map_int(host.lst)

  Example:
    http-response set-timeout tunnel 5s
    http-response set-timeout server res.hdr(X-Refresh-Seconds),mul(1000)


set-tos <tos> (deprecated)
  This is an alias for "set-fc-tos" (which should be used instead).


set-uri <fmt>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  - |  -

  This rewrites the request URI with the result of the evaluation of format
  string <fmt>. The scheme, authority, path and query string are all replaced
  at once. This can be used to rewrite hosts in front of proxies, or to perform
  complex modifications to the URI such as moving parts between the path and
  the query string. If an absolute URI is set, it will be sent as is to
  HTTP/1.1 servers. If it is not the desired behavior, the host, the path
  and/or the query string should be set separately.
  See also "http-request set-path" and "http-request set-query".


set-var(<var-name>[,<cond>...]) <expr>
set-var-fmt(<var-name>[,<cond>...]) <fmt>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          X  |   X  |   X  |   X  |          X |  X |  X

  This is used to set the contents of a variable. The variable is declared
  inline.

  Arguments:
   <var-name>   The name of the variable. Variable of the parent stream cannot
                be set. See section 2.8 about variables for details.

    <cond>      A set of conditions that must all be true for the variable to
                actually be set (such as "ifnotempty", "ifgt" ...). See the
                set-var converter's description for a full list of possible
                conditions.

    <expr>      Is a standard HAProxy expression formed by a sample-fetch
                followed by some converters.

    <fmt>       This is the value expressed using Custom log format rules (see
                Custom log format in section 8.2.6).

  All scopes are usable for HTTP rules, but scopes "proc" and "sess" are the
  only usable ones in rule sets which do not have access to contents such as
  "tcp-request connection" and "tcp-request session".

  Example:
    http-request set-var(req.my_var) req.fhdr(user-agent),lower
    http-request set-var-fmt(txn.from) %[src]:%[src_port]


silent-drop [ rst-ttl <ttl> ]
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          X  |   X  |   X  |   X  |          X |  X |  -

  This stops the evaluation of the rules and makes the client-facing connection
  suddenly disappear using a system-dependent way that tries to prevent the
  client from being notified. When called without the rst-ttl argument,
  we try to prevent sending any FIN or RST packet back to the client by
  using TCP_REPAIR. If this fails (mainly because of missing privileges),
  we fall back to sending a RST packet with a TTL of 1.

  The effect is that the client still sees an established connection while
  there is none on HAProxy, saving resources. However, stateful equipment
  placed between the HAProxy and the client (firewalls, proxies,
  load balancers) will also keep the established connection in their
  session tables.

  The optional rst-ttl changes this behaviour: TCP_REPAIR is not used, and an
  RST packet with a configurable TTL is sent. When set to a reasonable value,
  the RST packet travels through the local infrastructure, deleting the
  connection in firewalls and other systems, but disappears before reaching
  the client. Future packets from the client will then be dropped already by
  front equipment. These local RSTs protect local resources, but not the
  client's. This must not be used unless the consequences of doing this are
  fully understood.


strict-mode { on | off }
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  X |  X

  This enables or disables the strict rewriting mode for following rules. It
  does not affect rules declared before it and it is only applicable on rules
  performing a rewrite on the requests. When the strict mode is enabled, any
  rewrite failure triggers an internal error. Otherwise, such errors are
  silently ignored. The purpose of the strict rewriting mode is to make some
  rewrites optional while others must be performed to continue the request
  processing.

  By default, the strict rewriting mode is enabled. Its value is also reset
  when a ruleset evaluation ends. So, for instance, if you change the mode on
  the frontend, the default mode is restored when HAProxy starts the backend
  rules evaluation.


switch-mode http [ proto <name> ]
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   X  |   -  |          - |  - |  -

  This action is used to perform a connection upgrade. Only HTTP upgrades are
  supported for now. The protocol may optionally be specified. This action is
  only available for a proxy with the frontend capability. The connection
  upgrade is immediately performed, following "tcp-request content" rules are
  not evaluated. This upgrade method should be preferred to the implicit one
  consisting to rely on the backend mode. When used, it is possible to set HTTP
  directives in a frontend without any warning. These directives will be
  conditionally evaluated if the HTTP upgrade is performed. However, an HTTP
  backend must still be selected. It remains unsupported to route an HTTP
  connection (upgraded or not) to a TCP server.

  See section 4 about Proxies for more details on HTTP upgrades.


tarpit [ { status | deny_status } <code>] [content-type <type>]
       [ { default-errorfiles | errorfile <file> | errorfiles <name> |
           file <file> | lf-file <file> | string <str> | lf-string <fmt> } ]
       [ hdr <name> <fmt> ]*
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  - |  -

  This stops the evaluation of the rules and immediately blocks the request
  without responding for a delay specified by "timeout tarpit" or
  "timeout connect" if the former is not set. After that delay, if the client
  is still connected, a response is returned so that the client does not
  suspect it has been tarpitted. Logs will report the flags "PT". The goal of
  the tarpit rule is to slow down robots during an attack when they're limited
  on the number of concurrent requests. It can be very efficient against very
  dumb robots, and will significantly reduce the load on firewalls compared to
  a "deny" rule. But when facing "correctly" developed robots, it can make
  things worse by forcing HAProxy and the front firewall to support insane
  number of concurrent connections. By default an HTTP error 500 is returned.
  But the response may be customized using same syntax than
  "http-request return" rules. Thus, see "http-request return" for details.

  For compatibility purpose, when no argument is defined, or only "deny_status",
  the argument "default-errorfiles" is implied. It means
  "http-request tarpit [deny_status <status>]" is an alias of
  "http-request tarpit [status <status>] default-errorfiles".
  No further "http-request" rules are evaluated.
  See also "http-request return" and "http-request silent-drop".


track-sc0 <key> [table <table>]
track-sc1 <key> [table <table>]
track-sc2 <key> [table <table>]
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          X  |   X  |   X  |   -  |          X |  X |  -

  This enables tracking of sticky counters from current request. These rules do
  not stop evaluation and do not change default action. The number of counters
  that may be simultaneously tracked by the same connection is set by the
  global "tune.stick-counters" setting, which defaults to MAX_SESS_STKCTR if
  set at build time (it is reported in haproxy -vv) and which defaults to 3,
  so the track-sc number is between 0 and (tune.stick-counters-1). The first
  "track-sc0" rule executed enables tracking of the counters of the specified
  table as the first set. The first "track-sc1" rule executed enables tracking
  of the counters of the specified table as the second set. The first
  "track-sc2" rule executed enables tracking of the counters of the specified
  table as the third set. It is a recommended practice to use the first set of
  counters for the per-frontend counters and the second set for the per-backend
  ones. But this is just a guideline, all may be used everywhere.

  Arguments :

    <key>   is mandatory, and is a sample expression rule as described in
            section 7.3. It describes what elements of the incoming connection,
            request or response will be analyzed, extracted, combined, and used
            to select which table entry to update the counters.

    <table> is an optional table to be used instead of the default one, which
            is the stick-table declared in the current proxy. All the counters
            for the matches and updates for the key will then be performed in
            that table until the session ends.

  Once a "track-sc*" rule is executed, the key is looked up in the table and if
  it is not found, an entry is allocated for it. Then a pointer to that entry
  is kept during all the session's life, and this entry's counters are updated
  as often as possible, every time the session's counters are updated, and also
  systematically when the session ends. Counters are only updated for events
  that happen after the tracking has been started. As an exception, connection
  counters and request counters are systematically updated so that they reflect
  useful information.

  If the entry tracks concurrent connection counters, one connection is counted
  for as long as the entry is tracked, and the entry will not expire during
  that time. Tracking counters also provides a performance advantage over just
  checking the keys, because only one table lookup is performed for all ACL
  checks that make use of it.


unset-var(<var-name>)
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          X  |   X  |   X  |   X  |          X |  X |  X

  This is used to unset a variable. See the "set-var" action for details about
  <var-name>.

  Example:
    http-request unset-var(req.my_var)


use-service <service-name>
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   X  |   -  |          X |  - |  -

  This action executes the configured TCP or HTTP service to reply to the
  request, depending on the rule set it's used in. The rule is final, i.e.
  no further rules are evaluated in the same rule set.

  A service may choose to reply by sending any valid response or it may
  immediately close the connection without sending any response. For HTTP
  services, a valid response requires a valid HTTP response. Outside natives
  services, for instance the Prometheus exporter for HTTP services, it is
  possible to write custom TCP and HTTP services in Lua.

  Arguments :
    <service-name>  is mandatory. It is the service to call

  Example:
    http-request use-service prometheus-exporter if { path /metrics }


wait-for-body time <time> [ at-least <bytes> ]
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  X |  -

  This will delay the processing of the request or response until one of the
  following conditions occurs:
  - The full request body is received, in which case processing proceeds
    normally.
  - <bytes> bytes have been received, when the "at-least" argument is given and
    <bytes> is non-zero, in which case processing proceeds normally.
  - The request buffer is full, in which case processing proceeds normally. The
    size of this buffer is determined by the "tune.bufsize" option.
  - The request has been waiting for more than <time> milliseconds. In this
    case HAProxy will respond with a 408 "Request Timeout" error to the client
    and stop processing the request. Note that if any of the other conditions
    happens first, this timeout will not occur even if the full body has
    not yet been received.

  This action may be used as a replacement for "option http-buffer-request".

  Arguments :

    <time>    is mandatory. It is the maximum time to wait for the body. It
              follows the HAProxy time format and is expressed in milliseconds.

    <bytes>   is optional. It is the minimum payload size to receive to stop to
              wait. It follows the HAProxy size format and is expressed in
              bytes. A value of 0 (the default) means no limit.

  Example:
    http-request wait-for-body time 1s at-least 1k if METH_POST

  See also : "option http-buffer-request"


wait-for-handshake
  Usable in:  QUIC Ini|    TCP RqCon| RqSes| RqCnt| RsCnt|    HTTP Req| Res| Aft
                    - |          -  |   -  |   -  |   -  |          X |  - |  -

  This will delay the processing of the request until the SSL handshake
  happened. This is mostly useful to delay processing early data until we're
  sure they are valid.


5. Bind and server options
--------------------------

The "bind", "server" and "default-server" keywords support a number of settings
depending on some build options and on the system HAProxy was built on. These
settings generally each consist in one word sometimes followed by a value,
written on the same line as the "bind" or "server" line. All these options are
described in this section.


5.1. Bind options
-----------------

The "bind" keyword supports a certain number of settings which are all passed
as arguments on the same line. The order in which those arguments appear makes
no importance, provided that they appear after the bind address. All of these
parameters are optional. Some of them consist in a single words (booleans),
while other ones expect a value after them. In this case, the value must be
provided immediately after the setting name.

The currently supported settings are the following ones.

accept-netscaler-cip <magic number>
  Enforces the use of the NetScaler Client IP insertion protocol over any
  connection accepted by any of the TCP sockets declared on the same line. The
  NetScaler Client IP insertion protocol dictates the layer 3/4 addresses of
  the incoming connection to be used everywhere an address is used, with the
  only exception of "tcp-request connection" rules which will only see the
  real connection address. Logs will reflect the addresses indicated in the
  protocol, unless it is violated, in which case the real  address will still
  be used. This keyword combined with support from external components can be
  used as an efficient and reliable alternative to the X-Forwarded-For
  mechanism which is not always reliable and not even always usable. See also
  "tcp-request connection expect-netscaler-cip" for a finer-grained setting of
  which client is allowed to use the protocol.

accept-proxy
  Enforces the use of the PROXY protocol over any connection accepted by any of
  the sockets declared on the same line. Versions 1 and 2 of the PROXY protocol
  are supported and correctly detected. The PROXY protocol dictates the layer
  3/4 addresses of the incoming connection to be used everywhere an address is
  used, with the only exception of "tcp-request connection" rules which will
  only see the real connection address. Logs will reflect the addresses
  indicated in the protocol, unless it is violated, in which case the real
  address will still be used. This keyword combined with support from external
  components can be used as an efficient and reliable alternative to the
  X-Forwarded-For mechanism which is not always reliable and not even always
  usable. See also "tcp-request connection expect-proxy" for a finer-grained
  setting of which client is allowed to use the protocol.

allow-0rtt
  Allow receiving early data when using TLSv1.3. This is disabled by default,
  due to security considerations. Because it is vulnerable to replay attacks,
  you should only allow if for requests that are safe to replay, i.e. requests
  that are idempotent. You can use the "wait-for-handshake" action for any
  request that wouldn't be safe with early data.

alpn <protocols>
  This enables the TLS ALPN extension and advertises the specified protocol
  list as supported on top of ALPN. The protocol list consists in a comma-
  delimited list of protocol names, for instance: "http/1.1,http/1.0" (without
  quotes). This requires that the SSL library is built with support for TLS
  extensions enabled (check with haproxy -vv). The ALPN extension replaces the
  initial NPN extension. At the protocol layer, ALPN is required to enable
  HTTP/2 on an HTTPS frontend and HTTP/3 on a QUIC frontend. However, when such
  frontends have none of "npn", "alpn" and "no-alpn" set, a default value of
  "h2,http/1.1" will be used for a regular HTTPS frontend, and "h3" for a QUIC
  frontend. Versions of OpenSSL prior to 1.0.2 didn't support ALPN and only
  supposed the now obsolete NPN extension. At the time of writing this, most
  browsers still support both ALPN and NPN for HTTP/2 so a fallback to NPN may
  still work for a while. But ALPN must be used whenever possible. Protocols
  not advertised are not negotiated. For example it is possible to only accept
  HTTP/2 connections with this:

       bind :443 ssl crt pub.pem alpn h2  # explicitly disable HTTP/1.1

  QUIC supports only h3 and hq-interop as ALPN. h3 is for HTTP/3 and hq-interop
  is used for http/0.9 and QUIC interop runner (see https://interop.seemann.io).
  Each "alpn" statement will replace a previous one. In order to remove them,
  use "no-alpn".

  Note that some old browsers such as Firefox 88 used to experience issues with
  WebSocket over H2, and in case such a setup is encountered, it may be needed
  to either explicitly disable HTTP/2 in the "alpn" string by forcing it to
  "http/1.1" or "no-alpn", or to enable "h2-workaround-bogus-websocket-clients"
  globally.

backlog <backlog>
  Sets the socket's backlog to this value. If unspecified or 0, the frontend's
  backlog is used instead, which generally defaults to the maxconn value.

ca-file <cafile>
  This setting is only available when support for OpenSSL was built in. It
  designates a PEM file from which to load CA certificates used to verify
  client's certificate. It is possible to load a directory containing multiple
  CAs, in this case HAProxy will try to load every ".pem", ".crt", ".cer", and
  .crl" available in the directory, files starting with a dot are ignored.

  Warning: The "@system-ca" parameter could be used in place of the cafile
  in order to use the trusted CAs of your system, like its done with the server
  directive. But you mustn't use it unless you know what you are doing.
  Configuring it this way basically mean that the bind will accept any client
  certificate generated from one of the CA present on your system, which is
  extremely insecure.

ca-ignore-err [all|<errorID>,...]
  This setting is only available when support for OpenSSL was built in.
  Sets a comma separated list of errorIDs to ignore during verify at depth > 0.
  It could be a numerical ID, or the constant name (X509_V_ERR) which is
  available in the OpenSSL documentation:
  https://www.openssl.org/docs/manmaster/man3/X509_STORE_CTX_get_error.html#ERROR-CODES
  It is recommended to use the constant name as the numerical value can change
  in new version of OpenSSL.
  If set to 'all', all errors are ignored. SSL handshake is not aborted if an
  error is ignored.

ca-sign-file <cafile>
  This setting is only available when support for OpenSSL was built in. It
  designates a PEM file containing both the CA certificate and the CA private
  key used to create and sign server's certificates. This is a mandatory
  setting when the dynamic generation of certificates is enabled. See
  'generate-certificates' for details.

ca-sign-pass <passphrase>
  This setting is only available when support for OpenSSL was built in. It is
  the CA private key passphrase. This setting is optional and used only when
  the dynamic generation of certificates is enabled. See
  'generate-certificates' for details.

ca-verify-file <cafile>
  This setting designates a PEM file from which to load CA certificates used to
  verify client's certificate. It designates CA certificates which must not be
  included in CA names sent in server hello message. Typically, "ca-file" must
  be defined with intermediate certificates, and "ca-verify-file" with
  certificates to ending the chain, like root CA.

ciphers <ciphers>
  This setting is only available when support for OpenSSL was built in. It sets
  the string describing the list of cipher algorithms ("cipher suite") that are
  negotiated during the SSL/TLS handshake up to TLSv1.2. The format of the
  string is defined in "man 1 ciphers" from OpenSSL man pages. For background
  information and recommendations see e.g.
  (https://wiki.mozilla.org/Security/Server_Side_TLS) and
  (https://mozilla.github.io/server-side-tls/ssl-config-generator/). For TLSv1.3
  cipher configuration, please check the "ciphersuites" keyword.

ciphersuites <ciphersuites>
  This setting is only available when support for OpenSSL was built in and
  OpenSSL 1.1.1 or later was used to build HAProxy. It sets the string describing
  the list of cipher algorithms ("cipher suite") that are negotiated during the
  TLSv1.3 handshake. The format of the string is defined in "man 1 ciphers" from
  OpenSSL man pages under the "ciphersuites" section. For cipher configuration
  for TLSv1.2 and earlier, please check the "ciphers" keyword.
  This setting might accept TLSv1.2 ciphersuites however this is an
  undocumented behavior and not recommended as it could be inconsistent or buggy.
  The default TLSv1.3 ciphersuites of OpenSSL are:
  "TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256"

  TLSv1.3 only supports 5 ciphersuites:

  - TLS_AES_128_GCM_SHA256
  - TLS_AES_256_GCM_SHA384
  - TLS_CHACHA20_POLY1305_SHA256
  - TLS_AES_128_CCM_SHA256
  - TLS_AES_128_CCM_8_SHA256

  Example:
          ciphers ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-RSA-AES128-GCM-SHA256
          ciphersuites TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256

client-sigalgs <sigalgs>
  This setting is only available when support for OpenSSL was built in. It sets
  the string describing the list of signature algorithms related to client
  authentication that are negotiated . The format of the string is defined in
  "man 3 SSL_CTX_set1_client_sigalgs" from the OpenSSL man pages. It is not
  recommended to use this setting if no specific usecase was identified.

crl-file <crlfile>
  This setting is only available when support for OpenSSL was built in. It
  designates a PEM file from which to load certificate revocation list used
  to verify client's certificate. You need to provide a certificate revocation
  list for every certificate of your certificate authority chain.

crt <cert>
  This setting is only available when support for OpenSSL was built in.

  HAProxy uses a cache system, the files are loaded only once in the certificate
  storage, and each next "crt" keyword will use this cached version. When the
  certificate was declared in a "crt-store", the certificate storage is
  populated from there and don't try to load additional files by detecting file
  extensions.

  It designates a PEM file containing both the required certificates and any
  associated private keys. This file can be built by concatenating multiple
  PEM files into one (e.g. cat cert.pem key.pem > combined.pem). If your CA
  requires an intermediate certificate, this can also be concatenated into this
  file. Intermediate certificate can also be shared in a directory via
  "issuers-chain-path" directive.

  If the file does not contain a private key, HAProxy will try to load
  the key at the same path suffixed by a ".key".

  If the OpenSSL used supports Diffie-Hellman, parameters present in this file
  are loaded.

  If a directory name is used instead of a PEM file, then all files found in
  that directory will be loaded in alphabetic order unless their name ends
  with '.key', '.issuer', '.ocsp' or '.sctl' (reserved extensions). Files
  starting with a dot are also ignored. This directive may be specified multiple
  times in order to load certificates from multiple files or directories. The
  certificates will be presented to clients who provide a valid TLS Server Name
  Indication field matching one of their CN or alt subjects. Wildcards are
  supported, where a wildcard character '*' is used instead of the first
  hostname component (e.g. *.example.org matches www.example.org but not
  www.sub.example.org). If an empty directory is used, HAProxy will not start
  unless the "strict-sni" keyword is used.

  If no SNI is provided by the client or if the SSL library does not support
  TLS extensions, or if the client provides an SNI hostname which does not
  match any certificate, then the first loaded certificate will be presented.
  This means that when loading certificates from a directory, it is highly
  recommended to load the default one first as a file or to ensure that it will
  always be the first one in the directory. In order to chose multiple default
  certificates (1 rsa and 1 ecdsa), there are 3 options:
  - A multi-cert bundle can be configured as the first certificate
    (`crt foobar.pem` in the configuration where the existing files
    are `foobar.pem.ecdsa` and `foobar.pem.rsa`.
  - Or a '*' filter for each certificate in a crt-list line.
  - The 'default-crt' keyword can be used.

  Note that the same cert may be loaded multiple times without side effects.

  Some CAs (such as GoDaddy) offer a drop down list of server types that do not
  include HAProxy when obtaining a certificate. If this happens be sure to
  choose a web server that the CA believes requires an intermediate CA (for
  GoDaddy, selection Apache Tomcat will get the correct bundle, but many
  others, e.g. nginx, result in a wrong bundle that will not work for some
  clients).

  For each PEM file, HAProxy checks for the presence of file at the same path
  suffixed by ".ocsp". If such file is found, support for the TLS Certificate
  Status Request extension (also known as "OCSP stapling") is automatically
  enabled. The content of this file is optional. If not empty, it must contain
  a valid OCSP Response in DER format. In order to be valid an OCSP Response
  must comply with the following rules: it has to indicate a good status,
  it has to be a single response for the certificate of the PEM file, and it
  has to be valid at the moment of addition. If these rules are not respected
  the OCSP Response is ignored and a warning is emitted. In order to  identify
  which certificate an OCSP Response applies to, the issuer's certificate is
  necessary. If the issuer's certificate is not found in the PEM file, it will
  be loaded from a file at the same path as the PEM file suffixed by ".issuer"
  if it exists otherwise it will fail with an error.

  For each PEM file, HAProxy also checks for the presence of file at the same
  path suffixed by ".sctl". If such file is found, support for Certificate
  Transparency (RFC6962) TLS extension is enabled. The file must contain a
  valid Signed Certificate Timestamp List, as described in RFC. File is parsed
  to check basic syntax, but no signatures are verified.

  There are cases where it is desirable to support multiple key types, e.g. RSA
  and ECDSA in the cipher suites offered to the clients. This allows clients
  that support EC certificates to be able to use EC ciphers, while
  simultaneously supporting older, RSA only clients.

  To achieve this, OpenSSL 1.1.1 is required, you can configure this behavior
  by providing one crt entry per certificate type, or by configuring a "cert
  bundle" like it was required before HAProxy 1.8. See "ssl-load-extra-files".

crt-ignore-err <errors>
  This setting is only available when support for OpenSSL was built in. Sets a
  comma separated list of errorIDs to ignore during verify at depth == 0.
  It could be a numerical ID, or the constant name (X509_V_ERR) which is
  available in the OpenSSL documentation:
  https://www.openssl.org/docs/manmaster/man3/X509_STORE_CTX_get_error.html#ERROR-CODES
  It is recommended to use the constant name as the numerical value can change
  in new version of OpenSSL.
  If set to 'all', all errors are ignored. SSL handshake is not aborted if an
  error is ignored.

crt-list <file>
  This setting is only available when support for OpenSSL was built in. It
  designates a list of PEM file with an optional ssl configuration and a SNI
  filter per certificate, with the following format for each line :

        <crtfile> [\[<sslbindconf> ...\]] [[!]<snifilter> ...]

  Empty lines as well as lines beginning with a hash ('#') will be ignored.

  The crt-list can be manipulated dynamically over the stats socket. (See "add
  ssl crt-list", "del ssl crt-list", "show ssl crt-list" in the management
  guide).

  crt-list are usually dedicated files, however a directory loaded with the "crt"
  directive is represented internally as a crt-list. The "ssl-f-use" directive
  in a frontend also declares a crt-list linked to this frontend.

  crtfile:

    This is the filename of the certificate, or an identifier if it was declared
    elsewhere (over the CLI or in a crt-store with an alias for example).

    It is possible to use the same <crtfile> on multiple lines with different
    options and filters.

    Multi-cert bundling (see "ssl-load-extra-files") is supported in a
    crt-list, as long as only the base name is given in <crtfile>. HAProxy
    will duplicate the crt-list line internally, adding an algorithm extension
    (.rsa, .ecdsa, .dsa) when loading the file.

  sslbindconf:

     <sslbindconf> supports the following keywords from the bind line (see
     Section 5.1. Bind options):

     - allow-0rtt
     - alpn
     - ca-file
     - ca-verify-file
     - ciphers
     - ciphersuites
     - client-sigalgs
     - crl-file
     - curves
     - ecdhe
     - no-alpn
     - no-ca-names
     - npn
     - sigalgs
     - ssl-min-ver
     - ssl-max-ver
     - verify

     <sslbindconf> also supports the following keywords from the crt-store load
     keyword (see Section 12.7.1. Load options):

     - crt
     - key
     - ocsp
     - issuer
     - sctl
     - ocsp-update

    Parameters from the bind line are inherited in <sslbindconf>, if none were
    specified, the default options are inherited, the parameters specified in
    <sslbindconf> overwrite those inherited settings.

  snifilter:

    When the <snifilter> parameter is used on a crt-list line, the CN and SAN
    are not used anymore to select the certificate on this line during the
    handshake but the <snifilter> is used instead.

    <snifilter> is a list of entries separated by spaces. This list can contain
    domains, or wildcards. The wildcards are in wildcard DNS format, using a
    single asterisk as the first character of the entry. It is possible to
    exclude a domain from a wildcard with a negative filter by specifying a '!'
    in front of a single domain. Having a ! in front of a * is ignored. Having
    negative filters without a wildcard on the same line is not supported as
    well. The special entry '*' is used to specify default certificates, which
    are used as fallback when no domain matched.

    The certificates will be presented to clients who provide a valid TLS
    Server Name Indication field matching one of the SNI filters, or the CN and
    SAN of a <crtfile>. The matching algorithm first looks for a positive domain
    entry in the list, if not found it will try to look for a wildcard in the
    list. If a wilcard match, haproxy checks for a negative filter from the
    same line and unmatch if necessary. In case of multiple key algorithms
    (RSA,ECDSA,DSA), HAProxy will try to match one certificate per type and
    chose the right one depending on what is supported by the client.

    If no SNI is presented by the client or if no certificate matched, this
    will fallback to one of the default certificate. To disable the default
    certificate fallback, the 'strict-sni' option may be used.
    When multiple default certificates are defined, HAProxy is able to chose
    the right ECDSA or RSA one depending on what the client supports.

    The first declared certificate of a bind line is used as a default
    certificate, either from crt or crt-list option.
    It is also possible to declare a '*' filter, which will add this
    certificate to the list of default certificates. To clarify the
    configuration, the default certificates could be explicited (with a '*'
    filter) at the beginning of the list, so an implicit default is not added
    before.
    Due to multi-cert bundles being duplicated for each algorithm in the
    crt-list, only one algorithm will occupy the first line in the crt-list and
    be considered as default. Either specify the entire bundle as default by
    declaring '*' as the filter or setting it on the bind line.

    The "show ssl sni" command on the stats socket could be used to debug your
    configuration. (See "show ssl sni" in the management guide)

  Example:
        # comment
        default.pem.rsa *
        default.pem.ecdsa *
        cert2.pem [alpn h2,http/1.1]
        certW.pem *.domain.tld !secure.domain.tld
        certS.pem [curves X25519:P-256 ciphers ECDHE-ECDSA-AES256-GCM-SHA384] secure.domain.tld
        foo.crt [key bar.pem ocsp foo.ocsp ocsp-update on] foo.bar.com

default-crt <cert>
  This option does the same as the "crt" option, with the difference that this
  certificate will be used as a default one as well. It is possible to add
  multiple default certificates to have an ECDSA and an RSA one, having more is
  not really useful.

  This option does not disable implicit default certificates, if a 'crt'
  certificate is declared first before any 'default-crt' or other 'crt' it will
  still be used as a default certificate.

  A default certificate is used when no "strict-sni" option is used on the bind
  line. A default certificate is provided when the servername extension was not
  used by the client, or when the servername does not match any configured
  certificate.

  Example:

     # this bind line has 2 default certificates
     bind *:443 default-crt foobar.pem.rsa default-crt foobar.pem.ecdsa crt website.pem.rsa

     # this bind line has 3 default certificates
     bind *:443 crt website.pem.rsa default-crt foobar.pem.rsa default-crt foobar.pem.ecdsa

  See also the "crt" keyword.

curves <curves>
  This setting is only available when support for OpenSSL was built in. It sets
  the string describing the list of elliptic curves algorithms ("curve suite")
  that are negotiated during the SSL/TLS handshake with ECDHE. The format of the
  string is a colon-delimited list of curve name.
  Example: "X25519:P-256" (without quote)
  When "curves" is set, "ecdhe" parameter is ignored.

defer-accept
  Is an optional keyword which is supported only on certain Linux kernels. It
  states that a connection will only be accepted once some data arrive on it,
  or at worst after the first retransmit. This should be used only on protocols
  for which the client talks first (e.g. HTTP). It can slightly improve
  performance by ensuring that most of the request is already available when
  the connection is accepted. On the other hand, it will not be able to detect
  connections which don't talk. It is important to note that this option is
  broken in all kernels up to 2.6.31, as the connection is never accepted until
  the client talks. This can cause issues with front firewalls which would see
  an established connection while the proxy will only see it in SYN_RECV. This
  option is only supported on TCPv4/TCPv6 sockets and ignored by other ones.

ecdhe <named curve>
  This setting is only available when support for OpenSSL was built in. It sets
  the named curve (RFC 4492) used to generate ECDH ephemeral keys. By default,
  used named curve is prime256v1.

expose-fd listeners
  This option is only usable with the stats socket. It gives your stats socket
  the capability to pass listeners FD to another HAProxy process.
  In master-worker mode, this is not required anymore, the listeners will be
  passed using the internal socketpairs between the master and the workers.
  See also "-x" in the management guide.

force-sslv3
  This option enforces use of SSLv3 only on SSL connections instantiated from
  this listener. SSLv3 is generally less expensive than the TLS counterparts
  for high connection rates. This option is also available on global statement
  "ssl-default-bind-options". See also "ssl-min-ver" and "ssl-max-ver".

force-tlsv10
  This option enforces use of TLSv1.0 only on SSL connections instantiated from
  this listener. This option is also available on global statement
  "ssl-default-bind-options". See also "ssl-min-ver" and "ssl-max-ver".

force-tlsv11
  This option enforces use of TLSv1.1 only on SSL connections instantiated from
  this listener. This option is also available on global statement
  "ssl-default-bind-options". See also "ssl-min-ver" and "ssl-max-ver".

force-tlsv12
  This option enforces use of TLSv1.2 only on SSL connections instantiated from
  this listener. This option is also available on global statement
  "ssl-default-bind-options". See also "ssl-min-ver" and "ssl-max-ver".

force-tlsv13
  This option enforces use of TLSv1.3 only on SSL connections instantiated from
  this listener. This option is also available on global statement
  "ssl-default-bind-options". See also "ssl-min-ver" and "ssl-max-ver".

generate-certificates
  This setting is only available when support for OpenSSL was built in. It
  enables the dynamic SSL certificates generation. A CA certificate and its
  private key are necessary (see 'ca-sign-file'). When HAProxy is configured as
  a transparent forward proxy, SSL requests generate errors because of a common
  name mismatch on the certificate presented to the client. With this option
  enabled, HAProxy will try to forge a certificate using the SNI hostname
  indicated by the client. This is done only if no certificate matches the SNI
  hostname (see 'crt-list'). If an error occurs, the default certificate is
  used, else the 'strict-sni' option is set.
  It can also be used when HAProxy is configured as a reverse proxy to ease the
  deployment of an architecture with many backends.

  Creating a SSL certificate is an expensive operation, so a LRU cache is used
  to store forged certificates (see 'tune.ssl.ssl-ctx-cache-size'). It
  increases the HAProxy's memory footprint to reduce latency when the same
  certificate is used many times.

gid <gid>
  Sets the group of the UNIX sockets to the designated system gid. It can also
  be set by default in the global section's "unix-bind" statement. Note that
  some platforms simply ignore this. This setting is equivalent to the "group"
  setting except that the group ID is used instead of its name. This setting is
  ignored by non UNIX sockets.

group <group>
  Sets the group of the UNIX sockets to the designated system group. It can
  also be set by default in the global section's "unix-bind" statement. Note
  that some platforms simply ignore this. This setting is equivalent to the
  "gid" setting except that the group name is used instead of its gid. This
  setting is ignored by non UNIX sockets.

guid-prefix <string>
  Generate case-sensitive global unique IDs for each listening sockets
  allocated on this bind line. Prefix will be concatenated to listeners
  position index on the current bind line, with character '-' as separator. See
  "guid" proxy keyword description for more information on its format.

id <id>
  Fixes the socket ID. By default, socket IDs are automatically assigned, but
  sometimes it is more convenient to fix them to ease monitoring. This value
  must be strictly positive and unique within the listener/frontend. This
  option can only be used when defining only a single socket.

idle-ping <delay>
  May be used in the following contexts: tcp, http, log

  Define an interval for periodic liveliness on idle frontend connections. If
  the peer is unable to respond before the next scheduled test, the connection
  is closed. Else, the client timeout is refreshed and the connection is kept.
  Note that http-request/http-keep-alive timers run in parallel and are not
  refreshed by idle-ping.

  This feature relies on specific underlying protocol support. For now, only H2
  mux implements it. Idle-ping is simply ignored by other protocols.

  This option is particularly useful when using reverse HTTP. Setting it on the
  bind line is useful for the peer which is responsible to actively initiate
  connections and will then receive incoming traffic through them.

interface <interface>
  Restricts the socket to a specific interface. When specified, only packets
  received from that particular interface are processed by the socket. This is
  currently only supported on Linux. The interface must be a primary system
  interface, not an aliased interface. It is also possible to bind multiple
  frontends to the same address if they are bound to different interfaces. Note
  that binding to a network interface requires root privileges. This parameter
  is only compatible with TCPv4/TCPv6 sockets. When specified, return traffic
  uses the same interface as inbound traffic, and its associated routing table,
  even if there are explicit routes through different interfaces configured.
  This can prove useful to address asymmetric routing issues when the same
  client IP addresses need to be able to reach frontends hosted on different
  interfaces.

label <label>
  Sets an optional label for these sockets. It could be used group sockets by
  label, independently of where the bind lines were declared.

level <level>
  This setting is used with the stats sockets only to restrict the nature of
  the commands that can be issued on the socket. It is ignored by other
  sockets. <level> can be one of :
  - "user" is the least privileged level; only non-sensitive stats can be
    read, and no change is allowed. It would make sense on systems where it
    is not easy to restrict access to the socket.
  - "operator" is the default level and fits most common uses. All data can
    be read, and only non-sensitive changes are permitted (e.g. clear max
    counters).
  - "admin" should be used with care, as everything is permitted (e.g. clear
    all counters).

maxconn <maxconn>
  Limits the sockets to this number of concurrent connections. Extraneous
  connections will remain in the system's backlog until a connection is
  released. If unspecified, the limit will be the same as the frontend's
  maxconn. Note that in case of port ranges or multiple addresses, the same
  value will be applied to each socket. This setting enables different
  limitations on expensive sockets, for instance SSL entries which may easily
  eat all memory.

mode <mode>
  Sets the octal mode used to define access permissions on the UNIX socket. It
  can also be set by default in the global section's "unix-bind" statement.
  Note that some platforms simply ignore this. This setting is ignored by non
  UNIX sockets.

mss <maxseg>
  Sets the TCP Maximum Segment Size (MSS) value to be advertised on incoming
  connections. This can be used to force a lower MSS for certain specific
  ports, for instance for connections passing through a VPN. Note that this
  relies on a kernel feature which is theoretically supported under Linux but
  was buggy in all versions prior to 2.6.28. It may or may not work on other
  operating systems. It may also not change the advertised value but change the
  effective size of outgoing segments. The commonly advertised value for TCPv4
  over Ethernet networks is 1460 = 1500(MTU) - 40(IP+TCP). If this value is
  positive, it will be used as the advertised MSS. If it is negative, it will
  indicate by how much to reduce the incoming connection's advertised MSS for
  outgoing segments. This parameter is only compatible with TCP v4/v6 sockets.

name <name>
  Sets an optional name for these sockets, which will be reported on the stats
  page.

namespace <name>
  On Linux, it is possible to specify which network namespace a socket will
  belong to. This directive makes it possible to explicitly bind a listener to
  a namespace different from the default one. Please refer to your operating
  system's documentation to find more details about network namespaces.

nbconn <nbconn> [ EXPERIMENTAL ]
  This setting is only valid for listener instances which uses reverse HTTP.
  This will define the count of connections which will be mounted in parallel.
  If not specified, a default value of 1 is used.

  Reverse HTTP is currently still in active development. Configuration
  mechanism may change in the future. For this reason it is internally marked
  as expirmental, meaning that "expose-experimental-directives" must appear on
  a line before this directive.

nice <nice>
  Sets the 'niceness' of connections initiated from the socket. Value must be
  in the range -1024..1024 inclusive, and defaults to zero. Positive values
  means that such connections are more friendly to others and easily offer
  their place in the scheduler. On the opposite, negative values mean that
  connections want to run with a higher priority than others. The difference
  only happens under high loads when the system is close to saturation.
  Negative values are appropriate for low-latency or administration services,
  and high values are generally recommended for CPU intensive tasks such as SSL
  processing or bulk transfers which are less sensible to latency. For example,
  it may make sense to use a positive value for an SMTP socket and a negative
  one for an RDP socket.

no-alpn
  Disables ALPN processing (technically speaking this sets the ALPN string to
  an empty string that will not be advertised). It permits to cancel a previous
  occurrence of an "alpn" setting and to disable application protocol
  negotiation. It may also be used to prevent a listener from negotiating ALPN
  with a client on an HTTPS or QUIC listener; by default, HTTPS listeners will
  advertise "h2,http/1.1" and QUIC listeners will advertise "h3". See also
  "alpn" bove. Note that when using "crt-list", a certificate may override the
  "alpn" setting and re-enable its processing.

no-ca-names
  This setting is only available when support for OpenSSL was built in. It
  prevents from send CA names in server hello message when ca-file is used.
  Use "ca-verify-file" instead of "ca-file" with "no-ca-names".

no-sslv3
  This setting is only available when support for OpenSSL was built in. It
  disables support for SSLv3 on any sockets instantiated from the listener when
  SSL is supported. Note that SSLv2 is forced disabled in the code and cannot
  be enabled using any configuration option. This option is also available on
  global statement "ssl-default-bind-options". Use "ssl-min-ver" and
  "ssl-max-ver" instead.

no-strict-sni
  This setting is only available when support for OpenSSL was built in. It
  disables strict-sni enforcement from a previous "strict-sni" directive. It
  may be needed in order to selectively disable strict-sni usage on a "bind"
  line when it was already globally enforced via "ssl-default-bind-options".
  See also the "strict-sni" bind option.

no-tls-tickets
  This setting is only available when support for OpenSSL was built in. It
  disables the stateless session resumption (RFC 5077 TLS Ticket
  extension) and force to use stateful session resumption. Stateless
  session resumption is more expensive in CPU usage. This option is also
  available on global statement "ssl-default-bind-options".
  The TLS ticket mechanism is only used up to TLS 1.2.
  Forward Secrecy is compromised with TLS tickets, unless ticket keys
  are periodically rotated (via reload or by using "tls-ticket-keys").

no-tlsv10
  This setting is only available when support for OpenSSL was built in. It
  disables support for TLSv1.0 on any sockets instantiated from the listener
  when SSL is supported. Note that SSLv2 is forced disabled in the code and
  cannot be enabled using any configuration option. This option is also
  available on global statement "ssl-default-bind-options". Use "ssl-min-ver"
  and "ssl-max-ver" instead.

no-tlsv11
  This setting is only available when support for OpenSSL was built in. It
  disables support for TLSv1.1 on any sockets instantiated from the listener
  when SSL is supported. Note that SSLv2 is forced disabled in the code and
  cannot be enabled using any configuration option. This option is also
  available on global statement "ssl-default-bind-options". Use "ssl-min-ver"
  and "ssl-max-ver" instead.

no-tlsv12
  This setting is only available when support for OpenSSL was built in. It
  disables support for TLSv1.2 on any sockets instantiated from the listener
  when SSL is supported. Note that SSLv2 is forced disabled in the code and
  cannot be enabled using any configuration option. This option is also
  available on global statement "ssl-default-bind-options". Use "ssl-min-ver"
  and "ssl-max-ver" instead.

no-tlsv13
  This setting is only available when support for OpenSSL was built in. It
  disables support for TLSv1.3 on any sockets instantiated from the listener
  when SSL is supported. Note that SSLv2 is forced disabled in the code and
  cannot be enabled using any configuration option. This option is also
  available on global statement "ssl-default-bind-options". Use "ssl-min-ver"
  and "ssl-max-ver" instead.

npn <protocols>
  This enables the NPN TLS extension and advertises the specified protocol list
  as supported on top of NPN. The protocol list consists in a comma-delimited
  list of protocol names, for instance: "http/1.1,http/1.0" (without quotes).
  This requires that the SSL library is built with support for TLS extensions
  enabled (check with haproxy -vv). Note that the NPN extension has been
  replaced with the ALPN extension (see the "alpn" keyword), though this one is
  only available starting with OpenSSL 1.0.2. If HTTP/2 is desired on an older
  version of OpenSSL, NPN might still be used as most clients still support it
  at the time of writing this. It is possible to enable both NPN and ALPN
  though it probably doesn't make any sense out of testing.

prefer-client-ciphers
  Use the client's preference when selecting the cipher suite, by default
  the server's preference is enforced. This option is also available on
  global statement "ssl-default-bind-options".

  Note that with OpenSSL >= 1.1.1 ChaCha20-Poly1305 is reprioritized anyway
  (without setting this option), if a ChaCha20-Poly1305 cipher is at the top of
  the client cipher list.

  When using a dual algorithms setup (RSA + ECDSA), the selection algorithm
  will chose between RSA and ECDSA and will always prioritize ECDSA. Once the
  right certificate is chosen, it will let the SSL library prioritize ciphers,
  curves etc. Meaning this option can't be used to prioritize an RSA
  certificate over an ECDSA one.

proto <name>
  Forces the multiplexer's protocol to use for the incoming connections. It
  must be compatible with the mode of the frontend (TCP or HTTP). It must also
  be usable on the frontend side. The list of available protocols is reported
  in haproxy -vv. The protocols properties are reported : the mode (TCP/HTTP),
  the side (FE/BE), the mux name and its flags.

  Some protocols are subject to the head-of-line blocking on server side
  (flag=HOL_RISK). Finally some protocols don't support upgrades (flag=NO_UPG).
  The HTX compatibility is also reported (flag=HTX).

  Here are the protocols that may be used as argument to a "proto" directive on
  a bind line :

    h2   : mode=HTTP  side=FE|BE  mux=H2    flags=HTX|HOL_RISK|NO_UPG
    h1   : mode=HTTP  side=FE|BE  mux=H1    flags=HTX|NO_UPG
    none : mode=TCP   side=FE|BE  mux=PASS  flags=NO_UPG

  Idea behind this option is to bypass the selection of the best multiplexer's
  protocol for all connections instantiated from this listening socket. For
  instance, it is possible to force the http/2 on clear TCP by specifying "proto
  h2" on the bind line.

quic-cc-algo { cubic | newreno | bbr | nocc }[(<args,...>)]
  This is a QUIC specific setting to select the congestion control algorithm
  for any connection attempts to the configured QUIC listeners. They are
  similar to those used by TCP.

  Pacing is activated on top of the congestion algorithm to reduce loss and
  improve throughput. It can be turned off via "tune.quic.disable-tx-pacing"
  global keyword. In most cases, pacing should remain activated, especially
  when using BBR as it relies on it to work as expected. Using BBR without
  pacing may cause slowdowns or high loss rates during transfers.

  Default value: cubic

  For further customization, a list of parameters can be specified after the
  algorithm token. It must be written between parenthesis, separated by a
  comma. Each argument is optional and can be empty if needed. Here is the
  mandatory order of each parameters :
  - maximum window size in bytes. It must be greater than 10k and smaller than
    4g. By default "tune.quic.frontend.default-max-window-size" value is used.

  Example:
      # newreno congestion control algorithm
      quic-cc-algo newreno
      # cubic congestion control algorithm with one megabytes as window
      quic-cc-algo cubic(1m)

  A special value "nocc" may be used to force a fixed congestion window always
  set at the maximum size. It is reserved for debugging scenarios to remove any
  side effects caused by the congestion controller. It must not be used in
  production as it can quickly lead to network issues such as a high loss rate.

quic-force-retry
  This is a QUIC specific setting which forces the use of the QUIC Retry feature
  for all the connection attempts to the configured QUIC listeners. It consists
  in verifying the peers are able to receive packets at the transport address
  they used to initiate a new connection, sending them a Retry packet which
  contains a token. This token must be sent back to the Retry packet sender,
  this latter being the only one to be able to validate the token. Note that QUIC
  Retry will always be used even if a Retry threshold was set (see
  "tune.quic.retry-threshold" setting).

  This setting requires the cluster secret to be set or else an error will be
  reported on startup (see "cluster-secret").

  See https://www.rfc-editor.org/rfc/rfc9000.html#section-8.1.2 for more
  information about QUIC retry.

quic-socket [ connection | listener ]
  This QUIC specific setting allows to define the socket allocation mode for
  the specific listeners. See "tune.quic.socket-owner" for a full description
  of its usage.

severity-output <format>
  This setting is used with the stats sockets only to configure severity
  level output prepended to informational feedback messages. Severity
  level of messages can range between 0 and 7, conforming to syslog
  rfc5424. Valid and successful socket commands requesting data
  (i.e. "show map", "get acl foo" etc.) will never have a severity level
  prepended. It is ignored by other sockets. <format> can be one of :
  - "none" (default) no severity level is prepended to feedback messages.
  - "number" severity level is prepended as a number.
  - "string" severity level is prepended as a string following the
    rfc5424 convention.

shards { <number> | by-thread | by-group }
  In multi-threaded mode, on operating systems supporting multiple listeners on
  the same IP:port, this will automatically create this number of multiple
  identical listeners for the same line, all bound to a fair share of the number
  of the threads attached to this listener. This can sometimes be useful when
  using very large thread counts where the in-kernel locking on a single socket
  starts to cause a significant overhead. In this case the incoming traffic is
  distributed over multiple sockets and the contention is reduced. Note that
  doing this can easily increase the CPU usage by making more threads work a
  little bit.

  If the number of shards is higher than the number of available threads, it
  will automatically be trimmed to the number of threads (i.e. one shard per
  thread). The special "by-thread" value also creates as many shards as there
  are threads on the "bind" line. Since the system will evenly distribute the
  incoming traffic between all these shards, it is important that this number
  is an integral divisor of the number of threads. Alternately, the other
  special value "by-group" will create one shard per thread group. This can
  be useful when dealing with many threads and not wanting to create too many
  sockets. The load distribution will be a bit less optimal but the contention
  (especially in the system) will still be lower than with a single socket.

  On operating systems that do not support multiple sockets bound to the same
  address, "by-thread" and "by-group" will automatically fall back to a single
  shard. For "by-group" this is done without any warning since it doesn't
  change anything for a single group, and will result in sockets being
  duplicated for each group anyway. However, for "by-thread", a diagnostic
  warning will be emitted if this happens since the resulting number of
  listeners will not be the expected one.

sigalgs <sigalgs>
  This setting is only available when support for OpenSSL was built in. It sets
  the string describing the list of signature algorithms that are negotiated
  during the TLSv1.2 and TLSv1.3 handshake. The format of the string is defined
  in "man 3 SSL_CTX_set1_sigalgs" from the OpenSSL man pages. It is not
  recommended to use this setting unless compatibility with a middlebox is
  required.

ssl
  This setting is only available when support for OpenSSL was built in. It
  enables SSL deciphering on connections instantiated from this listener. A
  certificate is necessary (see "crt" above). All contents in the buffers will
  appear in clear text, so that ACLs and HTTP processing will only have access
  to deciphered contents. SSLv3 is disabled per default, use "ssl-min-ver SSLv3"
  to enable it.

ssl-max-ver [ SSLv3 | TLSv1.0 | TLSv1.1 | TLSv1.2 | TLSv1.3 ]
  This option enforces use of <version> or lower on SSL connections instantiated
  from this listener. Using this setting without "ssl-min-ver" can be
  ambiguous because the default ssl-min-ver value could change in future HAProxy
  versions. This option is also available on global statement
  "ssl-default-bind-options". See also "ssl-min-ver".

ssl-min-ver [ SSLv3 | TLSv1.0 | TLSv1.1 | TLSv1.2 | TLSv1.3 ]
  This option enforces use of <version> or upper on SSL connections
  instantiated from this listener. The default value is "TLSv1.2". This option
  is also available on global statement "ssl-default-bind-options".
  See also "ssl-max-ver".

strict-sni
  This setting is only available when support for OpenSSL was built in. The
  SSL/TLS negotiation is allowed only if the client provided an SNI that matches
  a certificate. The default certificate is not used. This option also allows
  starting without any certificate on a bind line, so an empty directory could
  be used and filled later from the stats socket. This option is also available
  on global statement "ssl-default-bind-options", and may be selectively
  disabled on a "bind" line using "no-strict-sni". See the "crt" option for
  more information. See "add ssl crt-list" command in the management guide.

tcp-ut <delay>
  Sets the TCP User Timeout for all incoming connections instantiated from this
  listening socket. This option is available on Linux since version 2.6.37. It
  allows HAProxy to configure a timeout for sockets which contain data not
  receiving an acknowledgment for the configured delay. This is especially
  useful on long-lived connections experiencing long idle periods such as
  remote terminals or database connection pools, where the client and server
  timeouts must remain high to allow a long period of idle, but where it is
  important to detect that the client has disappeared in order to release all
  resources associated with its connection (and the server's session). The
  argument is a delay expressed in milliseconds by default. This only works
  for regular TCP connections, and is ignored for other protocols.

tfo
  Is an optional keyword which is supported only on Linux kernels >= 3.7. It
  enables TCP Fast Open on the listening socket, which means that clients which
  support this feature will be able to send a request and receive a response
  during the 3-way handshake starting from second connection, thus saving one
  round-trip after the first connection. This only makes sense with protocols
  that use high connection rates and where each round trip matters. This can
  possibly cause issues with many firewalls which do not accept data on SYN
  packets, so this option should only be enabled once well tested. This option
  is only supported on TCPv4/TCPv6 sockets and ignored by other ones. You may
  need to build HAProxy with USE_TFO=1 if your libc doesn't define
  TCP_FASTOPEN.

thread [<thread-group>/]<thread-set>[,...]
  This restricts the list of threads on which this listener is allowed to run.
  It does not enforce any of them but eliminates those which do not match. It
  limits the threads allowed to process incoming connections for this listener.

  There are two numbering schemes. By default, thread numbers are absolute in
  the process, comprised between 1 and the value specified in global.nbthread.
  It is also possible to designate a thread number using its relative number
  inside its thread group, by specifying the thread group number first, then a
  slash ('/') and the relative thread number(s). In this case thread numbers
  also start at 1 and end at 32 or 64 depending on the platform. When absolute
  thread numbers are specified, they will be automatically translated to
  relative numbers once thread groups are known. Usually, absolute numbers are
  preferred for simple configurations, and relative ones are preferred for
  complex configurations where CPU arrangement matters for performance.

  After the optional thread group number, the "thread-set" specification must
  use the following format:

      "all" | "odd" | "even" | [number][-[number]]

  As their names imply, "all" validates all threads within the set (either all
  of the group's when a group is specified, or all of the process' threads),
  "odd" validates all odd-numberred threads (every other thread starting at 1)
  either for the process or the group, and "even" validates all even-numberred
  threads (every other thread starting at 2). If instead thread number ranges
  are used, then all threads included in the range from the first to the last
  thread number are validated. The numbers are either relative to the group
  or absolute depending on the presence of a thread group number. If the first
  thread number is omitted, "1" is used, representing either the first thread
  of the group or the first thread of the process. If the last thread number is
  omitted, either the last thread number of the group (32 or 64) is used, or
  the last thread number of the process (global.nbthread).

  These ranges may be repeated and delimited by a comma, so that non-contiguous
  thread sets can be specified, and the group, if present, must be specified
  again for each new range. Note that it is not permitted to mix group-relative
  and absolute specifications because the whole "bind" line must use either
  an absolute notation or a relative one, as those not set will be resolved at
  the end of the parsing.

  It is important to know that each listener described by a "bind" line creates
  at least one socket represented by at least one file descriptor. Since file
  descriptors cannot span multiple thread groups, if a "bind" line specifies a
  thread range that covers more than one group, several file descriptors will
  automatically be created so that there is at least one per group. Technically
  speaking they all refer to the same socket in the kernel, but they will get a
  distinct identifier in haproxy and will even have a dedicated stats entry if
  "option socket-stats" is used.

  The main purpose is to have multiple bind lines sharing the same IP:port but
  not the same thread in a listener, so that the system can distribute the
  incoming connections into multiple queues, bypassing haproxy's internal queue
  load balancing. Currently Linux 3.9 and above is known for supporting this.
  See also the "shards" keyword above that automates duplication of "bind"
  lines and their assignment to multiple groups of threads.

  This keyword is compatible with reverse HTTP binds. However, it is forbidden
  to specify a thread set which spans across several thread groups for such a
  listener as this may caused "nbconn" to not work as intended.

tls-tickets
  This setting is only available when support for OpenSSL was built in. It
  enables the stateless session resumption (RFC 5077 TLS Ticket extension). It
  is the default, but it may be needed to selectively re-enable the feature on
  a "bind" line if it had been globaly disabled via "no-tls-tickets" mentioned
  in "ssl-default-bind-options". See also the "no-tls-tickets" bind keyword.

tls-ticket-keys <keyfile>
  Sets the TLS ticket keys file to load the keys from. The keys need to be 48
  or 80 bytes long, depending if aes128 or aes256 is used, encoded with base64
  with one line per key (ex. openssl rand 80 | openssl base64 -A | xargs echo).
  The first key determines the key length used for next keys: you can't mix
  aes128 and aes256 keys. Number of keys is specified by the TLS_TICKETS_NO
  build option (default 3) and at least as many keys need to be present in
  the file. Last TLS_TICKETS_NO keys will be used for decryption and the
  penultimate one for encryption. This enables easy key rotation by just
  appending new key to the file and reloading the process.  Keys must be
  periodically rotated (ex. every 12h) or Perfect Forward Secrecy is
  compromised. It is also a good idea to keep the keys off any permanent
  storage such as hard drives (hint: use tmpfs and don't swap those files).
  Lifetime hint can be changed using tune.ssl.timeout.

transparent
  Is an optional keyword which is supported only on certain Linux kernels. It
  indicates that the addresses will be bound even if they do not belong to the
  local machine, and that packets targeting any of these addresses will be
  intercepted just as if the addresses were locally configured. This normally
  requires that IP forwarding is enabled. Caution! do not use this with the
  default address '*', as it would redirect any traffic for the specified port.
  This keyword is available only when HAProxy is built with USE_LINUX_TPROXY=1.
  This parameter is only compatible with TCPv4 and TCPv6 sockets, depending on
  kernel version. Some distribution kernels include backports of the feature,
  so check for support with your vendor.

uid <uid>
  Sets the owner of the UNIX sockets to the designated system uid. It can also
  be set by default in the global section's "unix-bind" statement. Note that
  some platforms simply ignore this. This setting is equivalent to the "user"
  setting except that the user numeric ID is used instead of its name. This
  setting is ignored by non UNIX sockets.

user <user>
  Sets the owner of the UNIX sockets to the designated system user. It can also
  be set by default in the global section's "unix-bind" statement. Note that
  some platforms simply ignore this. This setting is equivalent to the "uid"
  setting except that the user name is used instead of its uid. This setting is
  ignored by non UNIX sockets.

v4v6
  Is an optional keyword which is supported only on most recent systems
  including Linux kernels >= 2.4.21. It is used to bind a socket to both IPv4
  and IPv6 when it uses the default address. Doing so is sometimes necessary
  on systems which bind to IPv6 only by default. It has no effect on non-IPv6
  sockets, and is overridden by the "v6only" option.

v6only
  Is an optional keyword which is supported only on most recent systems
  including Linux kernels >= 2.4.21. It is used to bind a socket to IPv6 only
  when it uses the default address. Doing so is sometimes preferred to doing it
  system-wide as it is per-listener. It has no effect on non-IPv6 sockets and
  has precedence over the "v4v6" option.

verify [none|optional|required]
  This setting is only available when support for OpenSSL was built in. If set
  to 'none', client certificate is not requested. This is the default. In other
  cases, a client certificate is requested. If the client does not provide a
  certificate after the request and if 'verify' is set to 'required', then the
  handshake is aborted, while it would have succeeded if set to 'optional'. The
  certificate provided by the client is always verified using CAs from
  'ca-file' and optional CRLs from 'crl-file'. On verify failure the handshake
  is aborted, regardless of the 'verify' option, unless the error code exactly
  matches one of those listed with 'ca-ignore-err' or 'crt-ignore-err'.

5.2. Server and default-server options
------------------------------------

The "server" and "default-server" keywords support a certain number of settings
which are all passed as arguments on the server line. The order in which those
arguments appear does not count, and they are all optional. Some of those
settings are single words (booleans) while others expect one or several values
after them. In this case, the values must immediately follow the setting name.
Except default-server, all those settings must be specified after the server's
address if they are used:

  server <name> <address>[:port] [settings ...]
  default-server [settings ...]

Note that all these settings are supported both by "server" and "default-server"
keywords, except "id" which is only supported by "server".

The currently supported settings are the following ones.

addr <ipv4|ipv6>
  May be used in the following contexts: tcp, http, log

  Using the "addr" parameter, it becomes possible to use a different IP address
  to send health-checks or to probe the agent-check. On some servers, it may be
  desirable to dedicate an IP address to specific component able to perform
  complex tests which are more suitable to health-checks than the application.
  This parameter is ignored if the "check" parameter is not set. See also the
  "port" parameter.

agent-check
  May be used in the following contexts: tcp, http, log

  Enable an auxiliary agent check which is run independently of a regular
  health check. An agent health check is performed by making a TCP connection
  to the port set by the "agent-port" parameter and reading an ASCII string
  terminated by the first '\r' or '\n' met. The string is made of a series of
  words delimited by spaces, tabs or commas in any order, each consisting of :

  - An ASCII representation of a positive integer percentage, e.g. "75%".
    Values in this format will set the weight proportional to the initial
    weight of a server as configured when HAProxy starts. Note that a zero
    weight is reported on the stats page as "DRAIN" since it has the same
    effect on the server (it's removed from the LB farm). It is the legacy way
    to set the weight of a server. Setting it with the "weight:" prefix is
    preferred.

  - The string "weight:" following by an positive integer or a positive
    integer percentage, with no space. If the value ends with the '%' sign,
    then the new weight will be proportional to the initially weight of the
    server. Otherwise, the value is considered as an absolute weight and must
    be between 0 and 256. Servers which are part of a farm running a static
    load-balancing algorithm have stricter limitations because the weight
    cannot change once set. Thus for these servers, the only accepted values
    are 0 and 100% (or 0 and the initial weight). Changes take effect
    immediately, though certain LB algorithms require a certain amount of
    requests to consider changes. Note that a zero weight is reported on the
    stats page as "DRAIN" since it has the same effect on the server (it's
    removed from the LB farm).

  - The string "maxconn:" followed by an integer (no space between). Values
    in this format will set the maxconn of a server. The maximum number of
    connections advertised needs to be multiplied by the number of load
    balancers and different backends that use this health check to get the
    total number of connections the server might receive. Example: maxconn:30

  - The word "ready". This will turn the server's administrative state to the
    READY mode, thus canceling any DRAIN or MAINT state

  - The word "drain". This will turn the server's administrative state to the
    DRAIN mode, thus it will not accept any new connections other than those
    that are accepted via persistence.

  - The word "maint". This will turn the server's administrative state to the
    MAINT mode, thus it will not accept any new connections at all, and health
    checks will be stopped.

  - The words "down", "fail", or "stopped", optionally followed by a
    description string after a sharp ('#'). All of these mark the server's
    operating state as DOWN, but since the word itself is reported on the stats
    page, the difference allows an administrator to know if the situation was
    expected or not : the service may intentionally be stopped, may appear up
    but fail some validity tests, or may be seen as down (e.g. missing process,
    or port not responding).

  - The word "up" sets back the server's operating state as UP if health checks
    also report that the service is accessible.

  Parameters which are not advertised by the agent are not changed. For
  example, an agent might be designed to monitor CPU usage and only report a
  relative weight and never interact with the operating status. Similarly, an
  agent could be designed as an end-user interface with 3 radio buttons
  allowing an administrator to change only the administrative state. However,
  it is important to consider that only the agent may revert its own actions,
  so if a server is set to DRAIN mode or to DOWN state using the agent, the
  agent must implement the other equivalent actions to bring the service into
  operations again.

  Failure to connect to the agent is not considered an error as connectivity
  is tested by the regular health check which is enabled by the "check"
  parameter. Warning though, it is not a good idea to stop an agent after it
  reports "down", since only an agent reporting "up" will be able to turn the
  server up again. Note that the CLI on the Unix stats socket is also able to
  force an agent's result in order to work around a bogus agent if needed.

  Requires the "agent-port" parameter to be set. See also the "agent-inter"
  and "no-agent-check" parameters.

agent-send <string>
  May be used in the following contexts: tcp, http, log

  If this option is specified, HAProxy will send the given string (verbatim)
  to the agent server upon connection. You could, for example, encode
  the backend name into this string, which would enable your agent to send
  different responses based on the backend. Make sure to include a '\n' if
  you want to terminate your request with a newline.

agent-inter <delay>
  May be used in the following contexts: tcp, http, log

  The "agent-inter" parameter sets the interval between two agent checks
  to <delay> milliseconds. If left unspecified, the delay defaults to 2000 ms.

  Just as with every other time-based parameter, it may be entered in any
  other explicit unit among { us, ms, s, m, h, d }. The "agent-inter"
  parameter also serves as a timeout for agent checks "timeout check" is
  not set. In order to reduce "resonance" effects when multiple servers are
  hosted on the same hardware, the agent and health checks of all servers
  are started with a small time offset between them. It is also possible to
  add some random noise in the agent and health checks interval using the
  global "spread-checks" keyword. This makes sense for instance when a lot
  of backends use the same servers.

  See also the "agent-check" and "agent-port" parameters.

agent-addr <addr>
  May be used in the following contexts: tcp, http, log

  The "agent-addr" parameter sets address for agent check.

  You can offload agent-check to another target, so you can make single place
  managing status and weights of servers defined in HAProxy in case you can't
  make self-aware and self-managing services. You can specify both IP or
  hostname, it will be resolved.

agent-port <port>
  May be used in the following contexts: tcp, http, log

  The "agent-port" parameter sets the TCP port used for agent checks.

  See also the "agent-check" and "agent-inter" parameters.

allow-0rtt
  May be used in the following contexts: tcp, http, log, peers, ring

  Allow sending early data to the server when using TLS 1.3.
  Note that early data will be sent only if the client used early data, or
  if the backend uses "retry-on" with the "0rtt-rejected" keyword.

alpn <protocols>
  May be used in the following contexts: tcp, http

  This enables the TLS ALPN extension and advertises the specified protocol
  list as supported on top of ALPN. The protocol list consists in a comma-
  delimited list of protocol names, for instance: "http/1.1,http/1.0" (without
  quotes). This requires that the SSL library is built with support for TLS
  extensions enabled (check with haproxy -vv). The ALPN extension replaces the
  initial NPN extension. ALPN is required to connect to HTTP/2 servers.
  Versions of OpenSSL prior to 1.0.2 didn't support ALPN and only supposed the
  now obsolete NPN extension.
  If both HTTP/2 and HTTP/1.1 are expected to be supported, both versions can
  be advertised, in order of preference, like below :

       server 127.0.0.1:443 ssl crt pub.pem alpn h2,http/1.1

  See also "ws" to use an alternative ALPN for websocket streams.

backup
  May be used in the following contexts: tcp, http, log

  When "backup" is present on a server line, the server is only used in load
  balancing when all other non-backup servers are unavailable. Requests coming
  with a persistence cookie referencing the server will always be served
  though. By default, only the first operational backup server is used, unless
  the "allbackups" option is set in the backend. See also the "no-backup" and
  "allbackups" options.

ca-file <cafile>
  May be used in the following contexts: tcp, http, log, peers, ring

  This setting is only available when support for OpenSSL was built in. It
  designates a PEM file from which to load CA certificates used to verify
  server's certificate. It is possible to load a directory containing multiple
  CAs, in this case HAProxy will try to load every ".pem", ".crt", ".cer", and
  .crl" available in the directory, files starting with a dot are ignored.

  In order to use the trusted CAs of your system, the "@system-ca" parameter
  could be used in place of the cafile. The location of this directory could be
  overwritten by setting the SSL_CERT_DIR environment variable.

check
  May be used in the following contexts: tcp, http, log

  This option enables health checks on a server:
    - when not set, no health checking is performed, and the server is always
      considered available.
    - when set and no other check method is configured, the server is considered
      available when a connection can be established at the highest configured
      transport layer. This means TCP by default, or SSL/TLS when "ssl" or
      "check-ssl" are set, both possibly combined with connection prefixes such
      as a PROXY protocol header when "send-proxy" or "check-send-proxy" are
      set. This behavior is slightly different for dynamic servers, read the
      following paragraphs for more details.
    - when set and an application-level health check is defined, the
      application-level exchanges are performed on top of the configured
      transport layer and the server is considered available if all of the
      exchanges succeed.

  By default, health checks are performed on the same address and port as
  configured on the server, using the same encapsulation parameters (SSL/TLS,
  proxy-protocol header, etc... ). It is possible to change the destination
  address using "addr" and the port using "port". When done, it is assumed the
  server isn't checked on the service port, and configured encapsulation
  parameters are not reused. One must explicitly set "check-send-proxy" to send
  connection headers, "check-ssl" to use SSL/TLS.

  Note that the implicit configuration of ssl and PROXY protocol is not
  performed for dynamic servers. In this case, it is required to explicitly
  use "check-ssl" and "check-send-proxy" when wanted, even if the check port is
  not overridden.

  When "sni" or "alpn" are set on the server line, their value is not used for
  health checks and one must use "check-sni" or "check-alpn".

  The default source address for health check traffic is the same as the one
  defined in the backend. It can be changed with the "source" keyword.

  The interval between checks can be set using the "inter" keyword, and the
  "rise" and "fall" keywords can be used to define how many successful or
  failed health checks are required to flag a server available or not
  available.

  Optional application-level health checks can be configured with "option
  httpchk", "option mysql-check" "option smtpchk", "option pgsql-check",
  "option ldap-check", or "option redis-check".

  Example:
      # simple tcp check
      backend foo
        server s1 192.168.0.1:80 check
      # this does a tcp connect + tls handshake
      backend foo
        server s1 192.168.0.1:443 ssl check
      # simple tcp check is enough for check success
      backend foo
        option tcp-check
        tcp-check connect
        server s1 192.168.0.1:443 ssl check

check-reuse-pool
  May be used in the following contexts: tcp, http

  This option permits checks to reuse idle connections if available instead of
  opening a dedicated one. The connection is reinserted in the pool on check
  completion. The main objective is to limit the number of connections opening
  and closure on a specific server. This feature is compatible only with
  http-check rulesets. It is silently ignored for other check types.

  For configuration simplicity, this option is silently ignored if any specific
  check connect option is defined, either on the server line or via a custom
  tcp-check connect rule.

  This option is automatically enabled for servers acting as passive reverse
  HTTP gateway, as for those servers connect is only supported through reuse.

  See also: "check-pool-conn-name"

check-send-proxy
  May be used in the following contexts: tcp, http

  This option forces emission of a PROXY protocol line with outgoing health
  checks, regardless of whether the server uses send-proxy or not for the
  normal traffic. By default, the PROXY protocol is enabled for health checks
  if it is already enabled for normal traffic and if no "port" nor "addr"
  directive is present. However, if such a directive is present, the
  "check-send-proxy" option needs to be used to force the use of the
  protocol. See also the "send-proxy" option for more information.

check-alpn <protocols>
  May be used in the following contexts: tcp, http

  Defines which protocols to advertise with ALPN. The protocol list consists in
  a comma-delimited list of protocol names, for instance: "http/1.1,http/1.0"
  (without quotes). If it is not set, the server ALPN is used.

check-pool-conn-name <name>
  May be used in the following contexts: tcp, http

  When connection reuse is performed for checks, uses <name> if set as a
  connection identifier to match a corresponding connection in the pool. This
  serves as the equivalent to the "pool-conn-name" server keyword. "check-sni"
  will also be used as a fallback if the current option is not used.

  See also: "check-reuse-pool"

check-proto <name>
  May be used in the following contexts: tcp, http

  Forces the multiplexer's protocol to use for the server's health-check
  connections. It must be compatible with the health-check type (TCP or
  HTTP). It must also be usable on the backend side. The list of available
  protocols is reported in haproxy -vv. The protocols properties are
  reported : the mode (TCP/HTTP), the side (FE/BE), the mux name and its flags.

  Some protocols are subject to the head-of-line blocking on server side
  (flag=HOL_RISK). Finally some protocols don't support upgrades (flag=NO_UPG).
  The HTX compatibility is also reported (flag=HTX).

  Here are the protocols that may be used as argument to a "check-proto"
  directive on a server line:

    h2   : mode=HTTP  side=FE|BE  mux=H2    flags=HTX|HOL_RISK|NO_UPG
    fcgi : mode=HTTP  side=BE     mux=FCGI  flags=HTX|HOL_RISK|NO_UPG
    h1   : mode=HTTP  side=FE|BE  mux=H1    flags=HTX|NO_UPG
    none : mode=TCP   side=FE|BE  mux=PASS  flags=NO_UPG

  Idea behind this option is to bypass the selection of the best multiplexer's
  protocol for health-check connections established to this server.
  If not defined, the server one will be used, if set.

check-sni <sni>
  May be used in the following contexts: tcp, http, log

  This option allows you to specify the SNI to be used when doing health checks
  over SSL. It is only possible to use a string to set <sni>. If you want to
  set a SNI for proxied traffic, see "sni".

check-ssl
  May be used in the following contexts: tcp, http, log

  This option forces encryption of all health checks over SSL, regardless of
  whether the server uses SSL or not for the normal traffic. This is generally
  used when an explicit "port" or "addr" directive is specified and SSL health
  checks are not inherited. It is important to understand that this option
  inserts an SSL transport layer below the checks, so that a simple TCP connect
  check becomes an SSL connect, which replaces the old ssl-hello-chk. The most
  common use is to send HTTPS checks by combining "httpchk" with SSL checks.
  All SSL settings are common to health checks and traffic (e.g. ciphers).
  See the "ssl" option for more information and "no-check-ssl" to disable
  this option.

check-via-socks4
  May be used in the following contexts: tcp, http, log

  This option enables outgoing health checks using upstream socks4 proxy. By
  default, the health checks won't go through socks tunnel even it was enabled
  for normal traffic.

ciphers <ciphers>
  May be used in the following contexts: tcp, http, log, peers, ring

  This setting is only available when support for OpenSSL was built in. This
  option sets the string describing the list of cipher algorithms that is
  negotiated during the SSL/TLS handshake with the server. The format of the
  string is defined in "man 1 ciphers" from OpenSSL man pages. For background
  information and recommendations see e.g.
  (https://wiki.mozilla.org/Security/Server_Side_TLS) and
  (https://mozilla.github.io/server-side-tls/ssl-config-generator/). For TLSv1.3
  cipher configuration, please check the "ciphersuites" keyword.

ciphersuites <ciphersuites>
  May be used in the following contexts: tcp, http, log, peers, ring

  This setting is only available when support for OpenSSL was built in and
  OpenSSL 1.1.1 or later was used to build HAProxy. This option sets the string
  describing the list of cipher algorithms that is negotiated during the TLS
  1.3 handshake with the server. The format of the string is defined in
  "man 1 ciphers" from OpenSSL man pages under the "ciphersuites" section.
  For cipher configuration for TLSv1.2 and earlier, please check the "ciphers"
  keyword.

client-sigalgs <sigalgs>
  May be used in the following contexts: tcp, http, log, peers, ring

  This setting is only available when support for OpenSSL was built in. It sets
  the string describing the list of signature algorithms related to client
  authentication that are negotiated . The format of the string is defined in
  "man 3 SSL_CTX_set1_client_sigalgs" from the OpenSSL man pages. It is not
  recommended to use this setting if no specific usecase was identified.

cookie <value>
  May be used in the following contexts: http

  The "cookie" parameter sets the cookie value assigned to the server to
  <value>. This value will be checked in incoming requests, and the first
  operational server possessing the same value will be selected. In return, in
  cookie insertion or rewrite modes, this value will be assigned to the cookie
  sent to the client. There is nothing wrong in having several servers sharing
  the same cookie value, and it is in fact somewhat common between normal and
  backup servers. See also the "cookie" keyword in backend section.

crl-file <crlfile>
  May be used in the following contexts: tcp, http, log, peers, ring

  This setting is only available when support for OpenSSL was built in. It
  designates a PEM file from which to load certificate revocation list used
  to verify server's certificate.

crt <cert>
  May be used in the following contexts: tcp, http, log, peers, ring

  This setting is only available when support for OpenSSL was built in.
  It designates a PEM file from which to load both a certificate and the
  associated private key. This file can be built by concatenating both PEM
  files into one. This certificate will be sent if the server send a client
  certificate request.

  If the file does not contain a private key, HAProxy will try to load the key
  at the same path suffixed by a ".key" (provided the "ssl-load-extra-files"
  option is set accordingly).

curves <curves>
  May be used in the following contexts: tcp, http, log, peers, ring

  This setting is only available when support for OpenSSL was built in. It sets
  the string describing the list of elliptic curves algorithms ("curve suite")
  that are negotiated during the SSL/TLS handshake with ECDHE. The format of the
  string is a colon-delimited list of curve name.
  Example: "X25519:P-256" (without quote)

disabled
  May be used in the following contexts: tcp, http, log

  The "disabled" keyword starts the server in the "disabled" state. That means
  that it is marked down in maintenance mode, and no connection other than the
  ones allowed by persist mode will reach it. It is very well suited to setup
  new servers, because normal traffic will never reach them, while it is still
  possible to test the service by making use of the force-persist mechanism.
  See also "enabled" setting.

enabled
  May be used in the following contexts: tcp, http, log

  This option may be used as 'server' setting to reset any 'disabled'
  setting which would have been inherited from 'default-server' directive as
  default value.
  It may also be used as 'default-server' setting to reset any previous
  'default-server' 'disabled' setting.

error-limit <count>
  May be used in the following contexts: tcp, http, log

  If health observing is enabled, the "error-limit" parameter specifies the
  number of consecutive errors that triggers event selected by the "on-error"
  option. By default it is set to 10 consecutive errors.

  See also the "check", "error-limit" and "on-error".

fall <count>
  May be used in the following contexts: tcp, http, log

  The "fall" parameter states that a server will be considered as dead after
  <count> consecutive unsuccessful health checks. This value defaults to 3 if
  unspecified. See also the "check", "inter" and "rise" parameters.

force-sslv3
  May be used in the following contexts: tcp, http, log, peers, ring

  This option enforces use of SSLv3 only when SSL is used to communicate with
  the server. SSLv3 is generally less expensive than the TLS counterparts for
  high connection rates. This option is also available on global statement
  "ssl-default-server-options". See also "ssl-min-ver" and ssl-max-ver".

force-tlsv10
  May be used in the following contexts: tcp, http, log, peers, ring

  This option enforces use of TLSv1.0 only when SSL is used to communicate with
  the server. This option is also available on global statement
  "ssl-default-server-options". See also "ssl-min-ver" and ssl-max-ver".

force-tlsv11
  May be used in the following contexts: tcp, http, log, peers, ring

  This option enforces use of TLSv1.1 only when SSL is used to communicate with
  the server. This option is also available on global statement
  "ssl-default-server-options". See also "ssl-min-ver" and ssl-max-ver".

force-tlsv12
  May be used in the following contexts: tcp, http, log, peers, ring

  This option enforces use of TLSv1.2 only when SSL is used to communicate with
  the server. This option is also available on global statement
  "ssl-default-server-options". See also "ssl-min-ver" and ssl-max-ver".

force-tlsv13
  May be used in the following contexts: tcp, http, log, peers, ring

  This option enforces use of TLSv1.3 only when SSL is used to communicate with
  the server. This option is also available on global statement
  "ssl-default-server-options". See also "ssl-min-ver" and ssl-max-ver".

guid <string>
  May be used in the following contexts: tcp, http, log

  Specify a case-sensitive global unique ID for this server. This must be
  unique across all haproxy configuration on every object types. See "guid"
  proxy keyword description for more information on its format.

hash-key <key>
  May be used in the following contexts: tcp, http, log

  Specify how "hash-type consistent" node keys are computed

  Arguments :
    <key>   <key> may be one of the following :

      id         The node keys will be derived from the server's numeric
                 identifier as set from "id" or which defaults to its position
                 in the server list. This is the default. Note that only the 28
                 lowest bits of the ID will be used (i.e. (id % 268435456)), so
                 better only use values comprised between 1 and this value to
                 avoid overlap.

      addr       The node keys will be derived from the server's address, when
                 available, or else fall back on "id".

      addr-port  The node keys will be derived from the server's address and
                 port, when available, or else fall back on "id".

  The "addr" and "addr-port" options may be useful in scenarios where multiple
  HAProxy processes are balancing traffic to the same set of servers. If the
  server order of each process is different (because, for example, DNS records
  were resolved in different orders) then this will allow each independent
  HAProxy processes to agree on routing decisions. Note: "balance random" also
  uses "hash-type consistent", and the quality of the distribution will depend
  on the quality of the keys.

id <value>
  May be used in the following contexts: tcp, http, log

  Set a persistent ID for the server. This ID must be positive and unique for
  the proxy. An unused ID will automatically be assigned if unset. The first
  assigned value will be 1. This ID is currently only returned in statistics.

idle-ping <delay>
  May be used in the following contexts: tcp, http, log

  Define an interval for periodic liveliness on idle backend connections. If
  the peer is unable to respond before the next scheduled test, the connection
  is closed. This keyword refers to the backend side, so it is useful to check
  that idle connections are still usable. Note that this won't prevent the
  connection from being destroyed on idle pool purge.

  This feature relies on specific underlying protocol support. For now, only H2
  mux implements it. Idle-ping is simply ignored by other protocols.

  This option is particularly useful when using reverse HTTP. Setting it on the
  server line is useful for the peer which listen for incoming connections and
  attach them to a corresponding server to be able to reuse later on traffic
  forwarding.

init-addr {last | libc | none | <ip>},[...]*
  May be used in the following contexts: tcp, http, log

  Indicate in what order the server's address should be resolved upon startup
  if it uses an FQDN. Attempts are made to resolve the address by applying in
  turn each of the methods mentioned in the comma-delimited list. The first
  method which succeeds is used. If the end of the list is reached without
  finding a working method, an error is thrown. Method "last" suggests to pick
  the address which appears in the state file (see "server-state-file"). Method
  "libc" uses the libc's internal resolver (gethostbyname() or getaddrinfo()
  depending on the operating system and build options). Method "none"
  specifically indicates that the server should start without any valid IP
  address in a down state. It can be useful to ignore some DNS issues upon
  startup, waiting for the situation to get fixed later. Finally, an IP address
  (IPv4 or IPv6) may be provided. It can be the currently known address of the
  server (e.g. filled by a configuration generator), or the address of a dummy
  server used to catch old sessions and present them with a decent error
  message for example. When the "first" load balancing algorithm is used, this
  IP address could point to a fake server used to trigger the creation of new
  instances on the fly. This option defaults to "last,libc" indicating that the
  previous address found in the state file (if any) is used first, otherwise
  the libc's resolver is used. This ensures continued compatibility with the
  historic behavior. When using internal resolvers, it is generally recommended
  to either disable libc-based resolution, or make it explicit (see section 5.3
  for more details).

  Example 1:
      defaults
          # never fail on address resolution
          default-server init-addr last,libc,none

  Example 2:
      defaults
          # disable libc resolution in combination with resolvers
          default-server init-addr last,none

inter <delay>
fastinter <delay>
downinter <delay>
  May be used in the following contexts: tcp, http, log

  The "inter" parameter sets the interval between two consecutive health checks
  to <delay> milliseconds. If left unspecified, the delay defaults to 2000 ms.
  It is also possible to use "fastinter" and "downinter" to optimize delays
  between checks depending on the server state :

             Server state                   |         Interval used
    ----------------------------------------+----------------------------------
     UP 100% (non-transitional)             | "inter"
    ----------------------------------------+----------------------------------
     Transitionally UP (going down "fall"), | "fastinter" if set,
     Transitionally DOWN (going up "rise"), | "inter" otherwise.
     or yet unchecked.                      |
    ----------------------------------------+----------------------------------
     DOWN 100% (non-transitional)           | "downinter" if set,
                                            | "inter" otherwise.
    ----------------------------------------+----------------------------------

  Just as with every other time-based parameter, they can be entered in any
  other explicit unit among { us, ms, s, m, h, d }. The "inter" parameter also
  serves as a timeout for health checks sent to servers if "timeout check" is
  not set. In order to reduce "resonance" effects when multiple servers are
  hosted on the same hardware, the agent and health checks of all servers
  are started with a small time offset between them. It is also possible to
  add some random noise in the agent and health checks interval using the
  global "spread-checks" keyword. This makes sense for instance when a lot
  of backends use the same servers. The global "tune.max-checks-per-thread"
  setting, if defined to a non-nul value, will limit the number of concurrent
  checks being performed at once on any given thread. In order to achieve this,
  haproxy will put in a queue the checks that were about to start on a thread
  that has reached this limit, until another check finishes. This will have for
  effect to extend the effective check interval. In such a case, reducing the
  "inter" setting will have a very limited effect as it will not be able to
  reduce the time spent in the queue.

init-state { fully-up | up | down | fully-down }
  May be used in the following contexts: tcp, http

  May be used in sections :   defaults | frontend | listen | backend
                                 no   |    no    |   yes  |   yes

  The "init-state" option sets the initial state of the server:
    - when set to 'fully-up', the server is considered immediately available
      and can turn to the DOWN state when ALL health checks fail.
    - when set to 'up' (the default), the server is considered immediately
      available and will initiate a health check that can turn it to the DOWN
      state immediately if it fails.
    - when set to 'down', the server initially is considered unavailable and
      will initiate a health check that can turn it to the UP state immediately
      if it succeeds.
    - when set to 'fully-down', the server is initially considered unavailable
      and can turn to the UP state when ALL health checks succeed.

  The server's init-state is considered when the HAProxy instance is
  (re)started, a new server is detected (for example via service discovery /
  DNS resolution), a dynamic server is inlived, a server exits maintenance,
  etc.

  Examples:
      # pass client traffic ONLY to Redis "master" node
      backend redis-master
        mode tcp
        balance first
        option tcp-check
        tcp-check send role\r\n
        tcp-check expect string master
        server-template redis 3 _redis._tcp.redis-headless-service.sandbox.svc.cluster.local:6379 check ... init-state down

      # pass traffic to the server only after 3 successful health checks
      backend google-backend
        mode http
        server srv1 google.com:80 check init-state fully-down rise 3
        server srv2 google.com:80 check init-state fully-down rise 3

See also: "option tcp-check", "option httpchk"

log-bufsize <bufsize>
  May be used in the following contexts: log

  The "log-bufsize" specifies the ring bufsize to use for the implicit ring
  that will be associated to the log server in a log backend. When not
  specified, this defaults to BUFSIZE. Use of a greater value will increase
  memory usage but can help to prevent the loss of log messages with slow
  servers since the buffer will be able to hold more pending messages.
  This keyword may only be used in log backend sections (with "mode log")

log-proto <logproto>
  May be used in the following contexts: log, ring

  The "log-proto" specifies the protocol used to forward event messages to
  a server configured in a log or ring section. Possible values are "legacy"
  and "octet-count" corresponding respectively to "Non-transparent-framing"
  and "Octet counting" in rfc6587. "legacy" is the default.

maxconn <maxconn>
  May be used in the following contexts: tcp, http

  The "maxconn" parameter specifies the maximal number of concurrent
  connections that will be sent to this server. If the number of incoming
  concurrent connections goes higher than this value, they will be queued,
  waiting for a slot to be released. This parameter is very important as it can
  save fragile servers from going down under extreme loads. If a "minconn"
  parameter is specified, the limit becomes dynamic. The default value is "0"
  which means unlimited. See also the "minconn" and "maxqueue" parameters, and
  the backend's "fullconn" keyword.

  In HTTP mode this parameter limits the number of concurrent requests instead
  of the number of connections. Multiple requests might be multiplexed over a
  single TCP connection to the server. As an example if you specify a maxconn
  of 50 you might see between 1 and 50 actual server connections, but no more
  than 50 concurrent requests.

maxqueue <maxqueue>
  May be used in the following contexts: tcp, http

  The "maxqueue" parameter specifies the maximal number of connections which
  will wait in the queue for this server. If this limit is reached, next
  requests will be redispatched to other servers instead of indefinitely
  waiting to be served. This will break persistence but may allow people to
  quickly re-log in when the server they try to connect to is dying. Some load
  balancing algorithms such as leastconn take this into account and accept to
  add requests into a server's queue up to this value if it is explicitly set
  to a value greater than zero, which often allows to better smooth the load
  when dealing with single-digit maxconn values. The default value is "0" which
  means the queue is unlimited. See also the "maxconn" and "minconn" parameters
  and "balance leastconn".

max-reuse <count>
  May be used in the following contexts: http, ring

  When used under http context:

  The "max-reuse" argument indicates the HTTP connection processors that they
  should not reuse a server connection more than this number of times to send
  new requests. Permitted values are -1 (the default), which disables this
  limit, or any positive value. Value zero will effectively disable keep-alive.
  This is only used to work around certain server bugs which cause them to leak
  resources over time. The argument is not necessarily respected by the lower
  layers as there might be technical limitations making it impossible to
  enforce. At least HTTP/2 connections to servers will respect it.

  When used under ring context:

  The "max-reuse" argument indicates that the sink TCP connection processors
  that they should not reuse a server connection more than this number of
  times to send messages. It means that the connection to the server will be
  forcefully destroyed once at least "max-reuse + 1" messages were handled on
  the same connection. The connection to the server will then be automatically
  re-created. When dealing with a large amount of messages in multithreading
  context, this can help to better distribute the ring's load over multiple
  threads. Indeed, each connection is bound to the same CPU thread for its
  entire duration: unlike HTTP, there is no thing like syslog transaction, so
  the server connection could live indefinitely as long as the server doesn't
  close the connection or no network error occurs. By destroying connections
  from time to time we give the opportunity to other threads to pick-up some
  messages in turn. It may also help gracefully rotate log servers in contexts
  where there is an extra load-balancing layer between haproxy and the log
  servers. However, keep in mind that each connection recycling will leave an
  outgoing port in TIME_WAIT state that will not be reusable for around one
  minute on modern operating systems, and that as such, one must be careful
  not to use too low values to prevent rapid source port exhaustion. As a rule
  of thumb, make sure never to close more than a few times per second, and
  preferably much less often. Permitted values are -1 (the default), which
  disables this limit, or any positive value. Unlike under HTTP context, when
  used with sink servers "max-reuse" is a best-effort: ring messages are
  batched, so the limit is checked between each batch.

minconn <minconn>
  May be used in the following contexts: tcp, http

  When the "minconn" parameter is set, the maxconn limit becomes a dynamic
  limit following the backend's load. The server will always accept at least
  <minconn> connections, never more than <maxconn>, and the limit will be on
  the ramp between both values when the backend has less than <fullconn>
  concurrent connections. This makes it possible to limit the load on the
  server during normal loads, but push it further for important loads without
  overloading the server during exceptional loads. See also the "maxconn"
  and "maxqueue" parameters, as well as the "fullconn" backend keyword.

namespace <name>
  May be used in the following contexts: tcp, http, log, peers, ring

  On Linux, it is possible to specify which network namespace a socket will
  belong to. This directive makes it possible to explicitly bind a server to
  a namespace different from the default one. Please refer to your operating
  system's documentation to find more details about network namespaces.

no-agent-check
  May be used in the following contexts: tcp, http, log

  This option may be used as "server" setting to reset any "agent-check"
  setting which would have been inherited from "default-server" directive as
  default value.
  It may also be used as "default-server" setting to reset any previous
  "default-server" "agent-check" setting.

no-backup
  May be used in the following contexts: tcp, http, log

  This option may be used as "server" setting to reset any "backup"
  setting which would have been inherited from "default-server" directive as
  default value.
  It may also be used as "default-server" setting to reset any previous
  "default-server" "backup" setting.

no-check
  May be used in the following contexts: tcp, http, log

  This option may be used as "server" setting to reset any "check"
  setting which would have been inherited from "default-server" directive as
  default value.
  It may also be used as "default-server" setting to reset any previous
  "default-server" "check" setting.

no-check-reuse-pool
  May be used in the following contexts: tcp, http

  This option reverts any previous "check-reuse-pool" possibly inherited from a
  "default-server". Any checks will be conducted on its dedicated connection.

no-check-ssl
  May be used in the following contexts: tcp, http, log

  This option may be used as "server" setting to reset any "check-ssl"
  setting which would have been inherited from "default-server" directive as
  default value.
  It may also be used as "default-server" setting to reset any previous
  "default-server" "check-ssl" setting.

no-send-proxy
  May be used in the following contexts: tcp, http

  This option may be used as "server" setting to reset any "send-proxy"
  setting which would have been inherited from "default-server" directive as
  default value.
  It may also be used as "default-server" setting to reset any previous
  "default-server" "send-proxy" setting.

no-send-proxy-v2
  May be used in the following contexts: tcp, http

  This option may be used as "server" setting to reset any "send-proxy-v2"
  setting which would have been inherited from "default-server" directive as
  default value.
  It may also be used as "default-server" setting to reset any previous
  "default-server" "send-proxy-v2" setting.

no-send-proxy-v2-ssl
  May be used in the following contexts: tcp, http

  This option may be used as "server" setting to reset any "send-proxy-v2-ssl"
  setting which would have been inherited from "default-server" directive as
  default value.
  It may also be used as "default-server" setting to reset any previous
  "default-server" "send-proxy-v2-ssl" setting.

no-send-proxy-v2-ssl-cn
  May be used in the following contexts: tcp, http

  This option may be used as "server" setting to reset any "send-proxy-v2-ssl-cn"
  setting which would have been inherited from "default-server" directive as
  default value.
  It may also be used as "default-server" setting to reset any previous
  "default-server" "send-proxy-v2-ssl-cn" setting.

no-ssl
  May be used in the following contexts: tcp, http, log, peers, ring

  This option may be used as "server" setting to reset any "ssl"
  setting which would have been inherited from "default-server" directive as
  default value.
  It may also be used as "default-server" setting to reset any previous
  "default-server" "ssl" setting.

  Note that using `default-server ssl` setting and `no-ssl` on server will
  however init SSL connection, so it can be later be enabled through the
  runtime API: see `set server` commands in management doc.

no-ssl-reuse
  May be used in the following contexts: tcp, http, log, peers, ring

  This option disables SSL session reuse when SSL is used to communicate with
  the server. It will force the server to perform a full handshake for every
  new connection. It's probably only useful for benchmarking, troubleshooting,
  and for paranoid users.

no-sslv3
  May be used in the following contexts: tcp, http, log, peers, ring

  This option disables support for SSLv3 when SSL is used to communicate with
  the server. Note that SSLv2 is disabled in the code and cannot be enabled
  using any configuration option. Use "ssl-min-ver" and "ssl-max-ver" instead.

  Supported in default-server: No

no-tls-tickets
  May be used in the following contexts: tcp, http, log, peers, ring

  This setting is only available when support for OpenSSL was built in. It
  disables the stateless session resumption (RFC 5077 TLS Ticket
  extension) and force to use stateful session resumption. Stateless
  session resumption is more expensive in CPU usage for servers. This option
  is also available on global statement "ssl-default-server-options".
  The TLS ticket mechanism is only used up to TLS 1.2.
  Forward Secrecy is compromised with TLS tickets, unless ticket keys
  are periodically rotated (via reload or by using "tls-ticket-keys").
  See also "tls-tickets".

no-tlsv10
  May be used in the following contexts: tcp, http, log, peers, ring

  This option disables support for TLSv1.0 when SSL is used to communicate with
  the server. Note that SSLv2 is disabled in the code and cannot be enabled
  using any configuration option. TLSv1 is more expensive than SSLv3 so it
  often makes sense to disable it when communicating with local servers. This
  option is also available on global statement "ssl-default-server-options".
  Use "ssl-min-ver" and "ssl-max-ver" instead.

  Supported in default-server: No

no-tlsv11
  May be used in the following contexts: tcp, http, log, peers, ring

  This option disables support for TLSv1.1 when SSL is used to communicate with
  the server. Note that SSLv2 is disabled in the code and cannot be enabled
  using any configuration option. TLSv1 is more expensive than SSLv3 so it
  often makes sense to disable it when communicating with local servers. This
  option is also available on global statement "ssl-default-server-options".
  Use "ssl-min-ver" and "ssl-max-ver" instead.

  Supported in default-server: No

no-tlsv12
  May be used in the following contexts: tcp, http, log, peers, ring

  This option disables support for TLSv1.2 when SSL is used to communicate with
  the server. Note that SSLv2 is disabled in the code and cannot be enabled
  using any configuration option. TLSv1 is more expensive than SSLv3 so it
  often makes sense to disable it when communicating with local servers. This
  option is also available on global statement "ssl-default-server-options".
  Use "ssl-min-ver" and "ssl-max-ver" instead.

  Supported in default-server: No

no-tlsv13
  May be used in the following contexts: tcp, http, log, peers, ring

  This option disables support for TLSv1.3 when SSL is used to communicate with
  the server. Note that SSLv2 is disabled in the code and cannot be enabled
  using any configuration option. TLSv1 is more expensive than SSLv3 so it
  often makes sense to disable it when communicating with local servers. This
  option is also available on global statement "ssl-default-server-options".
  Use "ssl-min-ver" and "ssl-max-ver" instead.

  Supported in default-server: No

no-verifyhost
  May be used in the following contexts: tcp, http, log, peers, ring

  This option may be used as "server" setting to reset any "verifyhost"
  setting which would have been inherited from "default-server" directive as
  default value.
  It may also be used as "default-server" setting to reset any previous
  "default-server" "verifyhost" setting.

no-tfo
  May be used in the following contexts: tcp, http, log, peers, ring

  This option may be used as "server" setting to reset any "tfo"
  setting which would have been inherited from "default-server" directive as
  default value.
  It may also be used as "default-server" setting to reset any previous
  "default-server" "tfo" setting.

non-stick
  May be used in the following contexts: tcp, http

  Never add connections allocated to this sever to a stick-table.
  This may be used in conjunction with backup to ensure that
  stick-table persistence is disabled for backup servers.

npn <protocols>
  May be used in the following contexts: tcp, http

  This enables the NPN TLS extension and advertises the specified protocol list
  as supported on top of NPN. The protocol list consists in a comma-delimited
  list of protocol names, for instance: "http/1.1,http/1.0" (without quotes).
  This requires that the SSL library is built with support for TLS extensions
  enabled (check with haproxy -vv). Note that the NPN extension has been
  replaced with the ALPN extension (see the "alpn" keyword), though this one is
  only available starting with OpenSSL 1.0.2.

observe <mode>
  May be used in the following contexts: tcp, http

  This option enables health adjusting based on observing communication with
  the server. By default this functionality is disabled and enabling it also
  requires to enable health checks. There are two supported modes: "layer4" and
  "layer7". In layer4 mode, only successful/unsuccessful tcp connections are
  significant. In layer7, which is only allowed for http proxies, responses
  received from server are verified, like valid/wrong http code, unparsable
  headers, a timeout, etc. Valid status codes include 100 to 499, 501 and 505.

  See also the "check", "on-error" and "error-limit".

on-error <mode>
  May be used in the following contexts: tcp, http, log

  Select what should happen when enough consecutive errors are detected.
  Currently, four modes are available:
  - fastinter: force fastinter
  - fail-check: simulate a failed check, also forces fastinter (default)
  - sudden-death: simulate a pre-fatal failed health check, one more failed
    check will mark a server down, forces fastinter
  - mark-down: mark the server immediately down and force fastinter

  See also the "check", "observe" and "error-limit".

on-marked-down <action>
  May be used in the following contexts: tcp, http, log

  Modify what occurs when a server is marked down.
  Currently one action is available:
  - shutdown-sessions: Shutdown peer streams. When this setting is enabled,
    all connections to the server are immediately terminated when the server
    goes down. It might be used if the health check detects more complex cases
    than a simple connection status, and long timeouts would cause the service
    to remain unresponsive for too long a time. For instance, a health check
    might detect that a database is stuck and that there's no chance to reuse
    existing connections anymore. Connections killed this way are logged with
    a 'D' termination code (for "Down").

  Actions are disabled by default

on-marked-up <action>
  May be used in the following contexts: tcp, http, log

  Modify what occurs when a server is marked up.
  Currently one action is available:
  - shutdown-backup-sessions: Shutdown streams on all backup servers. This is
    done only if the server is not in backup state and if it is not disabled
    (it must have an effective weight > 0). This can be used sometimes to force
    an active server to take all the traffic back after recovery when dealing
    with long sessions (e.g. LDAP, SQL, ...). Doing this can cause more trouble
    than it tries to solve (e.g. incomplete transactions), so use this feature
    with extreme care. Streams killed because a server comes up are logged
    with an 'U' termination code (for "Up").

  Actions are disabled by default

pool-conn-name <expr>
  May be used in the following contexts: http

  When a backend connection is established, this expression is evaluated to
  generate the connection name. This name is one of the key properties of the
  connection in the idle server pool. See the "http-reuse" keyword. When a
  request looks up an existing idle connection, this expression is evaluated to
  match an identical connection.

  In context where SSL SNI is used for backend connection, the connection name
  is automatically assigned to the result of the "sni" expression. This suits
  the most common usage. For more advanced setup, "pool-conn-name" may be used
  to override this.

  See also: "http-reuse", "sni"

pool-low-conn <max>
  May be used in the following contexts: http

  Set a low threshold on the number of idling connections for a server, below
  which a thread will not try to steal a connection from another thread. This
  can be useful to improve CPU usage patterns in scenarios involving many very
  fast servers, in order to ensure all threads will keep a few idle connections
  all the time instead of letting them accumulate over one thread and migrating
  them from thread to thread. Typical values of twice the number of threads
  seem to show very good performance already with sub-millisecond response
  times. The default is zero, indicating that any idle connection can be used
  at any time. It is the recommended setting for normal use. This only applies
  to connections that can be shared according to the same principles as those
  applying to "http-reuse". In case connection sharing between threads would
  be disabled via "tune.idle-pool.shared", it can become very important to use
  this setting to make sure each thread always has a few connections, or the
  connection reuse rate will decrease as thread count increases.

pool-max-conn <max>
  May be used in the following contexts: http

  Set the maximum number of idling connections for a server. -1 means unlimited
  connections, 0 means no idle connections. The default is -1. When idle
  connections are enabled, orphaned idle connections which do not belong to any
  client session anymore are moved to a dedicated pool so that they remain
  usable by future clients. This only applies to connections that can be shared
  according to the same principles as those applying to "http-reuse".

pool-purge-delay <delay>
  May be used in the following contexts: http

  Sets the delay to start purging idle connections. Each <delay> interval, half
  of the idle connections are closed. 0 means we don't keep any idle connection.
  The default is 5s.

port <port>
  May be used in the following contexts: tcp, http, log

  Using the "port" parameter, it becomes possible to use a different port to
  send health-checks or to probe the agent-check. On some servers, it may be
  desirable to dedicate a port to a specific component able to perform complex
  tests which are more suitable to health-checks than the application. It is
  common to run a simple script in inetd for instance. This parameter is
  ignored if the "check" parameter is not set. See also the "addr" parameter.

proto <name>
  May be used in the following contexts: tcp, http

  Forces the multiplexer's protocol to use for the outgoing connections to this
  server. It must be compatible with the mode of the backend (TCP or HTTP). It
  must also be usable on the backend side. The list of available protocols is
  reported in haproxy -vv.The protocols properties are reported : the mode
  (TCP/HTTP), the side (FE/BE), the mux name and its flags.

  Some protocols are subject to the head-of-line blocking on server side
  (flag=HOL_RISK). Finally some protocols don't support upgrades (flag=NO_UPG).
  The HTX compatibility is also reported (flag=HTX).

  Here are the protocols that may be used as argument to a "proto" directive on
  a server line :

    h2   : mode=HTTP  side=FE|BE  mux=H2    flags=HTX|HOL_RISK|NO_UPG
    fcgi : mode=HTTP  side=BE     mux=FCGI  flags=HTX|HOL_RISK|NO_UPG
    h1   : mode=HTTP  side=FE|BE  mux=H1    flags=HTX|NO_UPG
    none : mode=TCP   side=FE|BE  mux=PASS  flags=NO_UPG

  Idea behind this option is to bypass the selection of the best multiplexer's
  protocol for all connections established to this server.

  See also "ws" to use an alternative protocol for websocket streams.

redir <prefix>
  May be used in the following contexts: http

  The "redir" parameter enables the redirection mode for all GET and HEAD
  requests addressing this server. This means that instead of having HAProxy
  forward the request to the server, it will send an "HTTP 302" response with
  the "Location" header composed of this prefix immediately followed by the
  requested URI beginning at the leading '/' of the path component. That means
  that no trailing slash should be used after <prefix>. All invalid requests
  will be rejected, and all non-GET or HEAD requests will be normally served by
  the server. Note that since the response is completely forged, no header
  mangling nor cookie insertion is possible in the response. However, cookies in
  requests are still analyzed, making this solution completely usable to direct
  users to a remote location in case of local disaster. Main use consists in
  increasing bandwidth for static servers by having the clients directly
  connect to them. Note: never use a relative location here, it would cause a
  loop between the client and HAProxy!

  Example :  server srv1 192.168.1.1:80 redir http://image1.mydomain.com check

rise <count>
  May be used in the following contexts: tcp, http, log

  The "rise" parameter states that a server will be considered as operational
  after <count> consecutive successful health checks. This value defaults to 2
  if unspecified. See also the "check", "inter" and "fall" parameters.

resolve-opts <option>,<option>,...
  May be used in the following contexts: tcp, http, log

  Comma separated list of options to apply to DNS resolution linked to this
  server.

  Available options:

  * allow-dup-ip
    By default, HAProxy prevents IP address duplication in a backend when DNS
    resolution at runtime is in operation.
    That said, for some cases, it makes sense that two servers (in the same
    backend, being resolved by the same FQDN) have the same IP address.
    For such case, simply enable this option.
    This is the opposite of prevent-dup-ip.

  * ignore-weight
    Ignore any weight that is set within an SRV record.  This is useful when
    you would like to control the weights using an alternate method, such as
    using an "agent-check" or through the runtime api.

  * prevent-dup-ip
    Ensure HAProxy's default behavior is enforced on a server: prevent reusing
    an IP address already set to a server in the same backend and sharing the
    same fqdn.
    This is the opposite of allow-dup-ip.

  Example:
    backend b_myapp
      default-server init-addr none resolvers dns
      server s1 myapp.example.com:80 check resolve-opts allow-dup-ip
      server s2 myapp.example.com:81 check resolve-opts allow-dup-ip

  With the option allow-dup-ip set:
  * if the nameserver returns a single IP address, then both servers will use
    it
  * If the nameserver returns 2 IP addresses, then each server will pick up a
    different address

  Default value: not set

resolve-prefer <family>
  May be used in the following contexts: tcp, http, log

  When DNS resolution is enabled for a server and multiple IP addresses from
  different families are returned, HAProxy will prefer using an IP address
  from the family mentioned in the "resolve-prefer" parameter. See also the
  global "dns-accept-family" keyword to enforce strict usage of a specific
  family. Available families: "ipv4" and "ipv6".

  Default value: ipv6

  Example:

    server s1 app1.domain.com:80 resolvers mydns resolve-prefer ipv6

resolve-net <network>[,<network[,...]]
  May be used in the following contexts: tcp, http, log

  This option prioritizes the choice of an ip address matching a network. This is
  useful with clouds to prefer a local ip. In some cases, a cloud high
  availability service can be announced with many ip addresses on many
  different datacenters. The latency between datacenter is not negligible, so
  this patch permits to prefer a local datacenter. If no address matches the
  configured network, another address is selected.

  Example:

    server s1 app1.domain.com:80 resolvers mydns resolve-net 10.0.0.0/8

resolvers <id>
  May be used in the following contexts: tcp, http, log

  Points to an existing "resolvers" section to resolve current server's
  hostname. It is often recommended to disable libc-based resolution when using
  resolvers, though exceptions exist (see section 5.3.1). In any case it is a
  good practice to explicitly specify "init-addr" when using resolvers in order
  not to overlook this element.

  Example:

    server s1 app1.domain.com:80 init-addr last,none check resolvers mydns

  See also section 5.3 for implementation details and traps to be aware of.

send-proxy
  May be used in the following contexts: tcp, http

  The "send-proxy" parameter enforces use of the PROXY protocol over any
  connection established to this server. The PROXY protocol informs the other
  end about the layer 3/4 addresses of the incoming connection, so that it can
  know the client's address or the public address it accessed to, whatever the
  upper layer protocol. For connections accepted by an "accept-proxy" or
  "accept-netscaler-cip" listener, the advertised address will be used. Only
  TCPv4 and TCPv6 address families are supported. Other families such as
  Unix sockets, will report an UNKNOWN family. Servers using this option can
  fully be chained to another instance of HAProxy listening with an
  "accept-proxy" setting. This setting must not be used if the server isn't
  aware of the protocol. When health checks are sent to the server, the PROXY
  protocol is automatically used when this option is set, unless there is an
  explicit "port" or "addr" directive, in which case an explicit
  "check-send-proxy" directive would also be needed to use the PROXY protocol.
  See also the "no-send-proxy" option of this section and "accept-proxy" and
  "accept-netscaler-cip" option of the "bind" keyword.

send-proxy-v2
  May be used in the following contexts: tcp, http

  The "send-proxy-v2" parameter enforces use of the PROXY protocol version 2
  over any connection established to this server. The PROXY protocol informs
  the other end about the layer 3/4 addresses of the incoming connection, so
  that it can know the client's address or the public address it accessed to,
  whatever the upper layer protocol. It also send ALPN information if an alpn
  have been negotiated. This setting must not be used if the server isn't aware
  of this version of the protocol. See also the "no-send-proxy-v2" option of
  this section and send-proxy" option of the "bind" keyword.

set-proxy-v2-tlv-fmt(<id>) <fmt>
  May be used in the following contexts: tcp, http

  The "set-proxy-v2-tlv-fmt" parameter is used to send arbitrary PROXY protocol
  version 2 TLVs. For the type (<id>) range of the defined TLV type please refer
  to section 2.2.8. of the proxy protocol specification. However, the value can
  be chosen freely as long as it does not exceed the maximum length of 65,535
  bytes. It can also be used for forwarding TLVs by using the fetch "fc_pp_tlv"
  to retrieve a received TLV from the frontend. It may be used as a server or
  a default-server option. It must be used in combination with send-proxy-v2
  such that PPv2 TLVs are actually sent out.

  Example:
  server srv1 192.168.1.1:80 send-proxy-v2 set-proxy-v2-tlv-fmt(0x20) %[fc_pp_tlv(0x20)]

  In this case, we fetch the TLV with the type 0x20 as a string and set as the value
  of a newly created TLV that also has the type 0x20.

proxy-v2-options <option>[,<option>]*
  May be used in the following contexts: tcp, http

  The "proxy-v2-options" parameter add options to send in PROXY protocol
  version 2 when "send-proxy-v2" is used. Options available are:

  - ssl       : See also "send-proxy-v2-ssl".
  - cert-cn   : See also "send-proxy-v2-ssl-cn".
  - ssl-cipher: Name of the used cipher.
  - cert-sig  : Signature algorithm of the used certificate.
  - cert-key  : Key algorithm of the used certificate
  - authority : Host name value passed by the client (only SNI from a TLS
                connection is supported).
  - crc32c    : Checksum of the PROXYv2 header.
  - unique-id : Send a unique ID generated using the frontend's
                "unique-id-format" within the PROXYv2 header.
                This unique-id is primarily meant for "mode tcp". It can
                lead to unexpected results in "mode http", because the
                generated unique ID is also used for the first HTTP request
                within a Keep-Alive connection.

send-proxy-v2-ssl
  May be used in the following contexts: tcp, http

  The "send-proxy-v2-ssl" parameter enforces use of the PROXY protocol version
  2 over any connection established to this server. The PROXY protocol informs
  the other end about the layer 3/4 addresses of the incoming connection, so
  that it can know the client's address or the public address it accessed to,
  whatever the upper layer protocol. In addition, the SSL information extension
  of the PROXY protocol is added to the PROXY protocol header. This setting
  must not be used if the server isn't aware of this version of the protocol.
  See also the "no-send-proxy-v2-ssl" option of this section and the
  "send-proxy-v2" option of the "bind" keyword.

send-proxy-v2-ssl-cn
  May be used in the following contexts: tcp, http

  The "send-proxy-v2-ssl" parameter enforces use of the PROXY protocol version
  2 over any connection established to this server. The PROXY protocol informs
  the other end about the layer 3/4 addresses of the incoming connection, so
  that it can know the client's address or the public address it accessed to,
  whatever the upper layer protocol. In addition, the SSL information extension
  of the PROXY protocol, along along with the Common Name from the subject of
  the client certificate (if any), is added to the PROXY protocol header. This
  setting must not be used if the server isn't aware of this version of the
  protocol. See also the "no-send-proxy-v2-ssl-cn" option of this section and
  the "send-proxy-v2" option of the "bind" keyword.

shard <shard>
  May be used in the following contexts: peers

  This parameter in used only in the context of stick-tables synchronisation
  with peers protocol. The "shard" parameter identifies the peers which will
  receive all the stick-table updates for keys with this shard as distribution
  hash. The accepted values are 0 up to "shards" parameter value specified in
  the "peers" section. 0 value is the default value meaning that the peer will
  receive all the key updates. Greater values than "shards" will be ignored.
  This is also the case for any value provided to the local peer.

  Example :

  peers mypeers
       shards 3
       peer A 127.0.0.1:40001 # local peer without shard value (0 internally)
       peer B 127.0.0.1:40002 shard 1
       peer C 127.0.0.1:40003 shard 2
       peer D 127.0.0.1:40004 shard 3

sigalgs <sigalgs>
  May be used in the following contexts: tcp, http, log, peers, ring

  This setting is only available when support for OpenSSL was built in. It sets
  the string describing the list of signature algorithms that are negotiated
  during the TLSv1.2 and TLSv1.3 handshake. The format of the string is defined
  in "man 3 SSL_CTX_set1_sigalgs" from the OpenSSL man pages. It is not
  recommended to use this setting unless compatibility with a middlebox is
  required.

slowstart <start_time_in_ms>
  May be used in the following contexts: tcp, http

  The "slowstart" parameter for a server accepts a value in milliseconds which
  indicates after how long a server which has just come back up will run at
  full speed. Just as with every other time-based parameter, it can be entered
  in any other explicit unit among { us, ms, s, m, h, d }. The speed grows
  linearly from 0 to 100% during this time. The limitation applies to two
  parameters :

  - maxconn: the number of connections accepted by the server will grow from 1
    to 100% of the usual dynamic limit defined by (minconn,maxconn,fullconn).

  - weight: when the backend uses a dynamic weighted algorithm, the weight
    grows linearly from 1 to 100%. In this case, the weight is updated at every
    health-check. For this reason, it is important that the "inter" parameter
    is smaller than the "slowstart", in order to maximize the number of steps.

  The slowstart never applies when HAProxy starts, otherwise it would cause
  trouble to running servers. It only applies when a server has been previously
  seen as failed.

sni <expression>
  May be used in the following contexts: tcp, http, log, peers, ring

  The "sni" parameter evaluates the sample fetch expression, converts it to a
  string and uses the result as the host name sent in the SNI TLS extension to
  the server. A typical use case is to send the SNI received from the client in
  a bridged TCP/SSL scenario, using the "ssl_fc_sni" sample fetch for the
  expression. THIS MUST NOT BE USED FOR HTTPS, where req.hdr(host) should be
  used instead, since SNI in HTTPS must always match the Host field and clients
  are allowed to use different host names over the same connection). If
  "verify required" is set (which is the recommended setting), the resulting
  name will also be matched against the server certificate's names. See the
  "verify" directive for more details. If you want to set a SNI for health
  checks, see the "check-sni" directive for more details.

  By default, the SNI is assigned to the connection name for "http-reuse",
  unless overridden by the "pool-conn-name" server keyword.

source <addr>[:<pl>[-<ph>]] [usesrc { <addr2>[:<port2>] | client | clientip } ]
source <addr>[:<port>] [usesrc { <addr2>[:<port2>] | hdr_ip(<hdr>[,<occ>]) } ]
source <addr>[:<pl>[-<ph>]] [interface <name>] ...
  May be used in the following contexts: tcp, http, log, peers, ring

  The "source" parameter sets the source address which will be used when
  connecting to the server. It follows the exact same parameters and principle
  as the backend "source" keyword, except that it only applies to the server
  referencing it. Please consult the "source" keyword for details.

  Additionally, the "source" statement on a server line allows one to specify a
  source port range by indicating the lower and higher bounds delimited by a
  dash ('-'). Some operating systems might require a valid IP address when a
  source port range is specified. It is permitted to have the same IP/range for
  several servers. Doing so makes it possible to bypass the maximum of 64k
  total concurrent connections. The limit will then reach 64k connections per
  server.

  Since Linux 4.2/libc 2.23 IP_BIND_ADDRESS_NO_PORT is set for connections
  specifying the source address without port(s).

ssl
  May be used in the following contexts: tcp, http, log, peers, ring

  This option enables SSL ciphering on outgoing connections to the server. It
  is critical to verify server certificates using "verify" when using SSL to
  connect to servers, otherwise the communication is prone to trivial man in
  the-middle attacks rendering SSL useless. When this option is used, health
  checks are automatically sent in SSL too unless there is a "port" or an
  "addr" directive indicating the check should be sent to a different location.
  See the "no-ssl" to disable "ssl" option and "check-ssl" option to force
  SSL health checks.

ssl-max-ver [ SSLv3 | TLSv1.0 | TLSv1.1 | TLSv1.2 | TLSv1.3 ]
  May be used in the following contexts: tcp, http, log, peers, ring

  This option enforces use of <version> or lower when SSL is used to communicate
  with the server. This option is also available on global statement
  "ssl-default-server-options". See also "ssl-min-ver".

ssl-min-ver [ SSLv3 | TLSv1.0 | TLSv1.1 | TLSv1.2 | TLSv1.3 ]
  May be used in the following contexts: tcp, http, log, peers, ring

  This option enforces use of <version> or upper when SSL is used to communicate
  with the server. This option is also available on global statement
  "ssl-default-server-options". See also "ssl-max-ver".

ssl-reuse
  May be used in the following contexts: tcp, http, log, peers, ring

  This option may be used as "server" setting to reset any "no-ssl-reuse"
  setting which would have been inherited from "default-server" directive as
  default value.
  It may also be used as "default-server" setting to reset any previous
  "default-server" "no-ssl-reuse" setting.

stick
  May be used in the following contexts: tcp, http

  This option may be used as "server" setting to reset any "non-stick"
  setting which would have been inherited from "default-server" directive as
  default value.
  It may also be used as "default-server" setting to reset any previous
  "default-server" "non-stick" setting.

strict-maxconn
  May be used in the following contexts: tcp, http

  maxconn to servers is a bit of a misnomer, it actually configure the maximum
  number of requests we send to a server, but with idle connections, we may
  have more total connections to the server. If a strict limit of connections
  to a server is required, then adding strict-maxconn can be used. We will
  then never establish more connections to a server than maxconn, and try to
  reuse or kill connections if needed. Please note, however, than it may lead
  to failed requests in case we can't establish a new connection, and no
  idle connection is available. This can happen when 'private" connections
  are established, connections tied only to a session, because authentication
  happened.

socks4 <addr>:<port>
  May be used in the following contexts: tcp, http, log, peers, ring

  This option enables upstream socks4 tunnel for outgoing connections to the
  server. Using this option won't force the health check to go via socks4 by
  default. You will have to use the keyword "check-via-socks4" to enable it.

tcp-ut <delay>
  May be used in the following contexts: tcp, http, log, peers, ring

  Sets the TCP User Timeout for all outgoing connections to this server. This
  option is available on Linux since version 2.6.37. It allows HAProxy to
  configure a timeout for sockets which contain data not receiving an
  acknowledgment for the configured delay. This is especially useful on
  long-lived connections experiencing long idle periods such as remote
  terminals or database connection pools, where the client and server timeouts
  must remain high to allow a long period of idle, but where it is important to
  detect that the server has disappeared in order to release all resources
  associated with its connection (and the client's session). One typical use
  case is also to force dead server connections to die when health checks are
  too slow or during a soft reload since health checks are then disabled. The
  argument is a delay expressed in milliseconds by default. This only works for
  regular TCP connections, and is ignored for other protocols.

tfo
  May be used in the following contexts: tcp, http, log, peers, ring

  This option enables using TCP fast open when connecting to servers, on
  systems that support it (currently only the Linux kernel >= 4.11).
  See the "tfo" bind option for more information about TCP fast open.
  Please note that when using tfo, you should also use the "conn-failure",
  "empty-response" and "response-timeout" keywords for "retry-on", or HAProxy
  won't be able to retry the connection on failure. See also "no-tfo".

track [<backend>/]<server>
  May be used in the following contexts: tcp, http, log

  This option enables ability to set the current state of the server by tracking
  another one. It is possible to track a server which itself tracks another
  server, provided that at the end of the chain, a server has health checks
  enabled. If <backend> is omitted the current one is used. If disable-on-404 is
  used, it has to be enabled on both proxies.

  Example :

    backend A
    server a1 1.1.1.1:80 track B/b1
    server a2 1.1.1.2:80 track B/b1

    backend B
    server b1 2.2.2.2:80 check

tls-tickets
  May be used in the following contexts: tcp, http, log, peers, ring

  This option may be used as "server" setting to reset any "no-tls-tickets"
  setting which would have been inherited from "default-server" directive as
  default value.
  The TLS ticket mechanism is only used up to TLS 1.2.
  Forward Secrecy is compromised with TLS tickets, unless ticket keys
  are periodically rotated (via reload or by using "tls-ticket-keys").
  It may also be used as "default-server" setting to reset any previous
  "default-server" "no-tls-tickets" setting.

verify [none|required]
  May be used in the following contexts: tcp, http, log, peers, ring

  This setting is only available when support for OpenSSL was built in. If set
  to 'none', server certificate is not verified. In the other case, The
  certificate provided by the server is verified using CAs from 'ca-file' and
  optional CRLs from 'crl-file' after having checked that the names provided in
  the certificate's subject and subjectAlternateNames attributes match either
  the name passed using the "sni" directive, or if not provided, the static
  host name passed using the "verifyhost" directive. When no name is found, the
  certificate's names are ignored. For this reason, without SNI it's important
  to use "verifyhost". On verification failure the handshake is aborted. It is
  critically important to verify server certificates when using SSL to connect
  to servers, otherwise the communication is prone to trivial man-in-the-middle
  attacks rendering SSL totally useless. Unless "ssl_server_verify" appears in
  the global section, "verify" is set to "required" by default.

verifyhost <hostname>
  May be used in the following contexts: tcp, http, log, peers, ring

  This setting is only available when support for OpenSSL was built in, and
  only takes effect if 'verify required' is also specified. This directive sets
  a default static hostname to check the server's certificate against when no
  SNI was used to connect to the server. If SNI is not used, this is the only
  way to enable hostname verification. This static hostname, when set, will
  also be used for health checks (which cannot provide an SNI value). If none
  of the hostnames in the certificate match the specified hostname, the
  handshake is aborted. The hostnames in the server-provided certificate may
  include wildcards. See also "verify", "sni" and "no-verifyhost" options.

weight <weight>
  May be used in the following contexts: tcp, http

  The "weight" parameter is used to adjust the server's weight relative to
  other servers. All servers will receive a load proportional to their weight
  relative to the sum of all weights, so the higher the weight, the higher the
  load. The default weight is 1, and the maximal value is 256. A value of 0
  means the server will not participate in load-balancing but will still accept
  persistent connections. If this parameter is used to distribute the load
  according to server's capacity, it is recommended to start with values which
  can both grow and shrink, for instance between 10 and 100 to leave enough
  room above and below for later adjustments.

ws { auto | h1 | h2 }
  May be used in the following contexts: http

  This option allows to configure the protocol used when relaying websocket
  streams. This is most notably useful when using an HTTP/2 backend without the
  support for H2 websockets through the RFC8441.

  The default mode is "auto". This will reuse the same protocol as the main
  one. The only difference is when using ALPN. In this case, it can try to
  downgrade the ALPN to "http/1.1" only for websocket streams if the configured
  server ALPN contains it.

  The value "h1" is used to force HTTP/1.1 for websockets streams, through ALPN
  if SSL ALPN is activated for the server. Similarly, "h2" can be used to
  force HTTP/2.0 websockets. Use this value with care : the server must support
  RFC8441 or an error will be reported by haproxy when relaying websockets.

  Note that NPN is not taken into account as its usage has been deprecated in
  favor of the ALPN extension.

  See also "alpn" and "proto".


5.3. Server IP address resolution using DNS
-------------------------------------------

HAProxy allows using a host name on the server line to retrieve its IP address
using name servers. By default, HAProxy resolves the name when parsing the
configuration file, at startup and cache the result for the process's life.
This is not sufficient in some cases, such as in Amazon where a server's IP
can change after a reboot or an ELB Virtual IP can change based on current
workload.

This chapter describes how HAProxy can be configured to process server's name
resolution at run time.

Whether run time server name resolution has been enable or not, by default
HAProxy will do the first resolution at startup during configuration parsing
via libc unless disabled by the "init-addr" parameter.

5.3.1. Global overview
----------------------

As we've seen in introduction, name resolution in HAProxy occurs at two
different steps of the process life:

  1. when starting up, HAProxy parses the server line definition and matches a
     host name. It uses libc functions to get the host name resolved. This
     resolution relies on /etc/resolv.conf file.

  2. at run time, HAProxy performs periodically name resolutions for servers
     requiring DNS resolutions.

A few other events can trigger a name resolution at run time:
  - when a server's health check ends up in a connection timeout: this may be
    because the server has a new IP address. So we need to trigger a name
    resolution to know this new IP.

When using resolvers, the server name can either be a hostname, or a SRV label.
HAProxy considers anything that starts with an underscore as a SRV label. If a
SRV label is specified, then the corresponding SRV records will be retrieved
from the DNS server, and the provided hostnames will be used. The SRV label
will be checked periodically, and if any server are added or removed, HAProxy
will automatically do the same.

A few things important to notice:
  - all the name servers are queried in the meantime. HAProxy will process the
    first valid response.

  - a resolution is considered as invalid (NX, timeout, refused), when all the
    servers return an error.

  - The DNS client implemented in HAProxy is very basic and will not understand
    the vast number of options and advanced setups that an operating system's
    resolver can deal with. As such, except for really trivial setups where a
    server known by its FQDN only has exactly one IP address at a time and
    might occasionally renew it (e.g. a reboot), it is highly recommended to
    avoid mixing libc-based init-time resolution with DNS-based runtime
    resolution, as such setups are known to cause failures upon address
    renewal. As a conclusion, unless you know exactly what you are doing, you
    should always exclude "libc" from "init-addr" when using "resolvers" on a
    server line.


5.3.2. The resolvers section
----------------------------

This section is dedicated to host information related to name resolution in
HAProxy. There can be as many as resolvers section as needed. Each section can
contain many name servers.

At startup, HAProxy tries to generate a resolvers section named "default", if
no section was named this way in the configuration. This section is used by
default by the httpclient and uses the parse-resolv-conf keyword. If HAProxy
failed to generate automatically this section, no error or warning are emitted.

When multiple name servers are configured in a resolvers section, then HAProxy
uses the first valid response. In case of invalid responses, only the last one
is treated. Purpose is to give the chance to a slow server to deliver a valid
answer after a fast faulty or outdated server.

When each server returns a different error type, then only the last error is
used by HAProxy. The following processing is applied on this error:

  1. HAProxy retries the same DNS query with a new query type. The A queries are
     switch to AAAA or the opposite. SRV queries are not concerned here. Timeout
     errors are also excluded.

  2. When the fallback on the query type was done (or not applicable), HAProxy
     retries the original DNS query, with the preferred query type.

  3. HAProxy retries previous steps <resolve_retries> times. If no valid
     response is received after that, it stops the DNS resolution and reports
     the error.

For example, with 2 name servers configured in a resolvers section, the
following scenarios are possible:

  - First response is valid and is applied directly, second response is
    ignored

  - First response is invalid and second one is valid, then second response is
    applied

  - First response is a NX domain and second one a truncated response, then
    HAProxy retries the query with a new type

  - First response is a NX domain and second one is a timeout, then HAProxy
    retries the query with a new type

  - Query timed out for both name servers, then HAProxy retries it with the
    same query type

As a DNS server may not answer all the IPs in one DNS request, HAProxy keeps
a cache of previous answers, an answer will be considered obsolete after
<hold obsolete> seconds without the IP returned.


resolvers <resolvers id>
  Creates a new name server list labeled <resolvers id>

A resolvers section accept the following parameters:

accepted_payload_size <nb>
  Defines the maximum payload size accepted by HAProxy and announced to all the
  name servers configured in this resolvers section.
  <nb> is in bytes. If not set, HAProxy announces 512. (minimal value defined
       by RFC 6891)

  Note: the maximum allowed value is 65535. Recommended value for UDP is
        4096 and it is not recommended to exceed 8192 except if you are sure
        that your system and network can handle this (over 65507 makes no sense
        since is the maximum UDP payload size). If you are using only TCP
        nameservers to handle huge DNS responses, you should put this value
        to the max: 65535.

nameserver <name> <address>[:port] [param*]
  Used to configure a nameserver. <name> of the nameserver should ne unique.
  By default the <address> is considered of type datagram. This means if an
  IPv4 or IPv6 is configured without special address prefixes (paragraph 11.)
  the UDP protocol will be used.  If an stream protocol address prefix is used,
  the nameserver will be considered as a stream server (TCP for instance) and
  "server" parameters found in 5.2 paragraph which are relevant for DNS
  resolving will be considered.  Note: currently, in TCP mode, 4 queries are
  pipelined on the same connections. A batch of idle connections are removed
  every 5 seconds. "maxconn" can be configured to limit the amount of those
  concurrent connections and TLS should also usable if the server supports.

parse-resolv-conf
  Adds all nameservers found in /etc/resolv.conf to this resolvers nameservers
  list. Ordered as if each nameserver in /etc/resolv.conf was individually
  placed in the resolvers section in place of this directive.

hold <status> <period>
  Upon receiving the DNS response <status>, determines whether a server's state
  should change from UP to DOWN. To make that determination, it checks whether
  any valid status has been received during the past <period> in order to
  counteract the just received invalid status.

    <status> : last name resolution status.
           nx        After receiving an NXDOMAIN status, check for any valid
                     status during the concluding period.

           refused   After receiving a REFUSED status, check for any valid
                     status during the concluding period.

           timeout   After the "timeout retry" has struck, check for any
                     valid status during the concluding period.

           other     After receiving any other invalid status, check for any
                     valid status during the concluding period.

           valid     Applies only to "http-request do-resolve" and
                     "tcp-request content do-resolve" actions. It defines the
                     period for which the server will maintain a valid response
                     before triggering another resolution. It does not affect
                     dynamic resolution of servers.

           obsolete  Defines how long to wait before removing obsolete DNS
                     records after an updated answer record is received. It
                     applies to SRV records.

    <period> : Amount of time into the past during which a valid response must
               have been received. It follows the HAProxy time format and is in
               milliseconds by default.

  For a server that relies on dynamic DNS resolution to determine its IP
  address, receiving an invalid DNS response, such as NXDOMAIN, will lead to
  changing the server's state from UP to DOWN. The hold directives define how
  far into the past to look for a valid response. If a valid response has been
  received within <period>, the just received invalid status will be ignored.

  Unless a valid response has been receiving during the concluding period, the
  server will be marked as DOWN. For example, if "hold nx 30s" is set and the
  last received DNS response was NXDOMAIN, the server will be marked DOWN
  unless a valid response has been received during the last 30 seconds.

  A server in the DOWN state will be marked UP immediately upon receiving a
  valid status from the DNS server.

  A separate behavior exists for "hold valid" and "hold obsolete".

  Default value is 10s for "valid", 0s for "obsolete" and 30s for others.

resolve_retries <nb>
  Defines the number <nb> of queries to send to resolve a server name before
  giving up.
  Default value: 3

  A retry occurs on name server timeout or when the full sequence of DNS query
  type failover is over and we need to start up from the default ANY query
  type.

timeout <event> <time>
  Defines timeouts related to name resolution
     <event> : the event on which the <time> timeout period applies to.
               events available are:
               - resolve : default time to trigger name resolutions when no
                           other time applied.
                           Default value: 1s
               - retry   : time between two DNS queries, when no valid response
                           have been received.
                           Default value: 1s
     <time>  : time related to the event. It follows the HAProxy time format.
               <time> is expressed in milliseconds.

  Example:

   resolvers mydns
     nameserver dns1 10.0.0.1:53
     nameserver dns2 10.0.0.2:53
     nameserver dns3 tcp@10.0.0.3:53
     parse-resolv-conf
     resolve_retries       3
     timeout resolve       1s
     timeout retry         1s
     hold other           30s
     hold refused         30s
     hold nx              30s
     hold timeout         30s
     hold valid           10s
     hold obsolete        30s


6. Cache
---------

HAProxy provides a cache, which was designed to perform cache on small objects
(favicon, css...). This is a minimalist low-maintenance cache which runs in
RAM.

The cache is based on a memory area shared between all threads, and split in 1kB
blocks.

If an object is not used anymore, it can be deleted to store a new object
independently of its expiration date. The oldest objects are deleted first
when we try to allocate a new one.

The cache uses a hash of the host header and the URI as the key.

It's possible to view the status of a cache using the Unix socket command
"show cache" consult section 9.3 "Unix Socket commands" of Management Guide
for more details.

When an object is delivered from the cache, the server name in the log is
replaced by "<CACHE>".


6.1. Limitation
----------------

The cache won't store and won't deliver objects in these cases:

- If the response is not a 200
- If the response contains a Vary header and either the process-vary option is
  disabled, or a currently unmanaged header is specified in the Vary value (only
  accept-encoding, referer and origin are managed for now)
- If the Content-Length + the headers size is greater than "max-object-size"
- If the response is not cacheable
- If the response does not have an explicit expiration time (s-maxage or max-age
  Cache-Control directives or Expires header) or a validator (ETag or Last-Modified
  headers)
- If the process-vary option is enabled and there are already max-secondary-entries
  entries with the same primary key as the current response
- If the process-vary option is enabled and the response has an unknown encoding (not
  mentioned in https://www.iana.org/assignments/http-parameters/http-parameters.xhtml)
  while varying on the accept-encoding client header

- If the request is not a GET
- If the HTTP version of the request is smaller than 1.1
- If the request contains an Authorization header


6.2. Setup
-----------

To setup a cache, you must define a cache section and use it in a proxy with
the corresponding http-request and http-response actions.


6.2.1. Cache section
---------------------

cache <name>
  Declare a cache section, allocate a shared cache memory named <name>, the
  size of cache is mandatory (see keyword "total-max-size" below).

max-age <seconds>
  Define the maximum expiration duration. The expiration is set as the lowest
  value between the s-maxage or max-age (in this order) directive in the
  Cache-Control response header and this value. The default value is 60
  seconds, which means that you can't cache an object more than 60 seconds by
  default.

max-object-size <bytes>
  Define the maximum size of the objects to be cached. Must not be greater than
  an half of "total-max-size". If not set, it equals to a 256th of the cache size.
  All objects with sizes larger than "max-object-size" will not be cached.

max-secondary-entries <number>
  Define the maximum number of simultaneous secondary entries with the same primary
  key in the cache. This needs the vary support to be enabled. Its default value is 10
  and should be passed a strictly positive integer.

process-vary <on/off>
  Enable or disable the processing of the Vary header. When disabled, a response
  containing such a header will never be cached. When enabled, we need to calculate
  a preliminary hash for a subset of request headers on all the incoming requests
  (which might come with a cpu cost) which will be used to build a secondary
  key for a given request (see RFC 7234#4.1). The secondary key is built out of
  the contents of the 'accept-encoding', 'referer' and 'origin' headers for
  now. The default value is off (disabled).

total-max-size <megabytes>
  Define the size in RAM of the cache in megabytes. This size is split in
  blocks of 1kB which are used by the cache entries. Its maximum value is 4095.


6.2.2. Proxy section
---------------------

The proxy section making use of the cache will need to involve the "cache-use"
action in the "http-request" rule set in order to look up the requested object
from the cache, and the "cache-store" action in the "http-response" rule set in
order to store or update the retrieved object into the cache. Each of these
actions may optionally involve conditions. For example, one could decide to
skip the "cache-use" action for a certain sub-directory that is known not to
be cacheable, or to skip the "cache-store" action for certain content-types
that are known to be worthless. Please note that the cache indexing key is
computed during the "cache-use" action, so if this action is skipped, no
attempt to update the cache will be made on the response path anyway.

Example:

    backend bck1
      mode http

      http-request cache-use foobar
      http-response cache-store foobar
      server srv1 127.0.0.1:80

    cache foobar
      total-max-size 4
      max-age 240


7. Using ACLs and fetching samples
----------------------------------

HAProxy is capable of extracting data from request or response streams, from
client or server information, from tables, environmental information etc...
The action of extracting such data is called fetching a sample. Once retrieved,
these samples may be used for various purposes such as a key to a stick-table,
but most common usages consist in matching them against predefined constant
data called patterns.


7.1. ACL basics
---------------

Access Control Lists (ACL) consist in declaring a named method to compare any
piece of information against a list of pre-defined patterns. They should be
seen as practically equivalent to functions in most programming languages, in
that their declaration makes them available to be later called when needed.
Their evaluation only returns a match or a mismatch, which is comparable to
booleans in many programming languages. Contrary to functions in programming
languages, ACLs may be overloaded as many times as needed in order to define
additional matching methods for the same name. In this case they will all be
evaluated in their declaration order until one matches.

The use of ACLs provides a flexible solution to perform content switching and
generally to take decisions based on content extracted from the request, the
response or any environmental status. The principle is simple :

  - extract a data sample from a stream, table or the environment
  - optionally apply some format conversion to the extracted sample
  - apply one or multiple pattern matching methods on this sample
  - perform actions only when a pattern matches the sample

The actions generally consist in blocking a request, selecting a backend, or
adding a header.

In order to define a test, the "acl" keyword is used. The syntax is :

   acl <aclname> <criterion> [flags] [operator] [<value>] ...

This creates a new ACL <aclname> or completes an existing one with new tests.
Those tests apply to the portion of request/response specified in <criterion>
and may be adjusted with optional flags [flags]. Some criteria also support
an operator which may be specified before the set of values. Optionally some
conversion operators may be applied to the sample, and they will be specified
as a comma-delimited list of keywords just after the first keyword. The values
are of the type supported by the criterion, and are separated by spaces.

ACL names must be formed from upper and lower case letters, digits, '-' (dash),
'_' (underscore) , '.' (dot) and ':' (colon). ACL names are case-sensitive,
which means that "my_acl" and "My_Acl" are two different ACLs.

There is no enforced limit to the number of ACLs. The unused ones do not affect
performance, they just consume a small amount of memory.

The criterion generally is the name of a sample fetch method, or one of its ACL
specific declinations. The default test method is implied by the output type of
this sample fetch method. The ACL declinations can describe alternate matching
methods of a same sample fetch method. The sample fetch methods are the only
ones supporting a conversion.

Sample fetch methods return data which can be of the following types :
  - boolean
  - integer (signed or unsigned)
  - IPv4 or IPv6 address
  - string
  - data block

Converters transform any of these data into any of these. For example, some
converters might convert a string to a lower-case string while other ones
would turn a string to an IPv4 address, or apply a netmask to an IP address.
The resulting sample is of the type of the last converter applied to the list,
which defaults to the type of the sample fetch method.

Each sample or converter returns data of a specific type, specified with its
keyword in this documentation. When an ACL is declared using a standard sample
fetch method, certain types automatically involved a default matching method
which are summarized in the table below :

   +---------------------+-----------------+
   | Sample or converter | Default         |
   |    output type      | matching method |
   +---------------------+-----------------+
   | boolean             | bool            |
   +---------------------+-----------------+
   | integer             | int             |
   +---------------------+-----------------+
   | ip                  | ip              |
   +---------------------+-----------------+
   | string              | str             |
   +---------------------+-----------------+
   | binary              | none, use "-m"  |
   +---------------------+-----------------+

Note that in order to match a binary samples, it is mandatory to specify a
matching method, see below.

The ACL engine can match these types against patterns of the following types :
  - boolean
  - integer or integer range
  - IP address / network
  - string (exact, substring, suffix, prefix, subdir, domain)
  - regular expression
  - hex block

The following ACL flags are currently supported :

   -i : ignore case during matching of all subsequent patterns.
   -f : load patterns from a list.
   -m : use a specific pattern matching method
   -n : forbid the DNS resolutions
   -M : load the file pointed by -f like a map.
   -u : force the unique id of the ACL
   -- : force end of flags. Useful when a string looks like one of the flags.

The "-f" flag is followed by the name that must follow the format described in
2.7. about name format for maps and ACLs. It is even possible to pass multiple
"-f" arguments if the patterns are to be loaded from multiple lists. if an
existing file is referenced, all lines will be read as individual values. Empty
lines as well as lines beginning with a sharp ('#') will be ignored. All
leading spaces and tabs will be stripped. If it is absolutely necessary to
insert a valid pattern beginning with a sharp, just prefix it with a space so
that it is not taken for a comment. Depending on the data type and match
method, HAProxy may load the lines into a binary tree, allowing very fast
lookups. This is true for IPv4 and exact string matching. In this case,
duplicates will automatically be removed.

The "-M" flag allows an ACL to use a map. If this flag is set, the list is
parsed as two column entries. The first column contains the patterns used by the
ACL, and the second column contain the samples. The sample can be used later by
a map. This can be useful in some rare cases where an ACL would just be used to
check for the existence of a pattern in a map before a mapping is applied.

The "-u" flag forces the unique id of the ACL. This unique id is used with the
socket interface to identify ACL and dynamically change its values. Note that a
file is always identified by its name even if an id is set.

Also, note that the "-i" flag applies to subsequent entries and not to entries
loaded from files preceding it. For instance :

    acl valid-ua hdr(user-agent) -f exact-ua.lst -i -f generic-ua.lst test

In this example, each line of "exact-ua.lst" will be exactly matched against
the "user-agent" header of the request. Then each line of "generic-ua" will be
case-insensitively matched. Then the word "test" will be insensitively matched
as well.

The "-m" flag is used to select a specific pattern matching method on the input
sample. All ACL-specific criteria imply a pattern matching method and generally
do not need this flag. However, this flag is useful with generic sample fetch
methods to describe how they're going to be matched against the patterns. This
is required for sample fetches which return data type for which there is no
obvious matching method (e.g. string or binary). When "-m" is specified and
followed by a pattern matching method name, this method is used instead of the
default one for the criterion. This makes it possible to match contents in ways
that were not initially planned, or with sample fetch methods which return a
string. The matching method also affects the way the patterns are parsed.

The "-n" flag forbids the dns resolutions. It is used with the load of ip files.
By default, if the parser cannot parse ip address it considers that the parsed
string is maybe a domain name and try dns resolution. The flag "-n" disable this
resolution. It is useful for detecting malformed ip lists. Note that if the DNS
server is not reachable, the HAProxy configuration parsing may last many minutes
waiting for the timeout. During this time no error messages are displayed. The
flag "-n" disable this behavior. Note also that during the runtime, this
function is disabled for the dynamic acl modifications.

There are some restrictions however. Not all methods can be used with all
sample fetch methods. Also, if "-m" is used in conjunction with "-f", it must
be placed first. The pattern matching method must be one of the following :

  - "found" : only check if the requested sample could be found in the stream,
              but do not compare it against any pattern. It is recommended not
              to pass any pattern to avoid confusion. This matching method is
              particularly useful to detect presence of certain contents such
              as headers, cookies, etc... even if they are empty and without
              comparing them to anything nor counting them.

  - "bool"  : check the value as a boolean. It can only be applied to fetches
              which return a boolean or integer value, and takes no pattern.
              Value zero or false does not match, all other values do match.

  - "int"   : match the value as an integer. It can be used with integer and
              boolean samples. Boolean false is integer 0, true is integer 1.

  - "ip"    : match the value as an IPv4 or IPv6 address. It is compatible
              with IP address samples only, so it is implied and never needed.

  - "bin"   : match the contents against a hexadecimal string representing a
              binary sequence. This may be used with binary or string samples.

  - "len"   : match the sample's length as an integer. This may be used with
              binary or string samples.

  - "str"   : exact match : match the contents against a string. This may be
              used with binary or string samples.

  - "sub"   : substring match : check that the contents contain at least one of
              the provided string patterns. This may be used with binary or
              string samples.

  - "reg"   : regex match : match the contents against a list of regular
              expressions. This may be used with binary or string samples.

  - "beg"   : prefix match : check that the contents begin like the provided
              string patterns. This may be used with binary or string samples.

  - "end"   : suffix match : check that the contents end like the provided
              string patterns. This may be used with binary or string samples.

  - "dir"   : subdir match : check that a slash-delimited portion of the
              contents exactly matches one of the provided string patterns.
              This may be used with binary or string samples.

  - "dom"   : domain match : check that a dot-delimited portion of the contents
              exactly match one of the provided string patterns. This may be
              used with binary or string samples.

For example, to quickly detect the presence of cookie "JSESSIONID" in an HTTP
request, it is possible to do :

    acl jsess_present req.cook(JSESSIONID) -m found

In order to apply a regular expression on the 500 first bytes of data in the
buffer, one would use the following acl :

    acl script_tag req.payload(0,500) -m reg -i <script>

On systems where the regex library is much slower when using "-i", it is
possible to convert the sample to lowercase before matching, like this :

    acl script_tag req.payload(0,500),lower -m reg <script>

All ACL-specific criteria imply a default matching method. Most often, these
criteria are composed by concatenating the name of the original sample fetch
method and the matching method. For example, "hdr_beg" applies the "beg" match
to samples retrieved using the "hdr" fetch method. This matching method is only
usable when the keyword is used alone, without any converter. In case any such
converter were to be applied after such an ACL keyword, the default matching
method from the ACL keyword is simply ignored since what will matter for the
matching is the output type of the last converter. Since all ACL-specific
criteria rely on a sample fetch method, it is always possible instead to use
the original sample fetch method and the explicit matching method using "-m".

If an alternate match is specified using "-m" on an ACL-specific criterion,
the matching method is simply applied to the underlying sample fetch method.
For example, all ACLs below are exact equivalent :

    acl short_form  hdr_beg(host)        www.
    acl alternate1  hdr_beg(host) -m beg www.
    acl alternate2  hdr_dom(host) -m beg www.
    acl alternate3  hdr(host)     -m beg www.


The table below summarizes the compatibility matrix between sample or converter
types and the pattern types to fetch against. It indicates for each compatible
combination the name of the matching method to be used, surrounded with angle
brackets ">" and "<" when the method is the default one and will work by
default without "-m".

                           +-------------------------------------------------+
                           |                Input sample type                |
    +----------------------+---------+---------+---------+---------+---------+
    |     pattern type     | boolean | integer |   ip    | string  | binary  |
    +----------------------+---------+---------+---------+---------+---------+
    | none (presence only) |  found  |  found  |  found  |  found  |  found  |
    +----------------------+---------+---------+---------+---------+---------+
    | none (boolean value) |>  bool <|   bool  |         |   bool  |         |
    +----------------------+---------+---------+---------+---------+---------+
    | integer (value)      |   int   |>  int  <|   int   |   int   |         |
    +----------------------+---------+---------+---------+---------+---------+
    | integer (length)     |   len   |   len   |   len   |   len   |   len   |
    +----------------------+---------+---------+---------+---------+---------+
    | IP address           |         |         |>   ip  <|    ip   |    ip   |
    +----------------------+---------+---------+---------+---------+---------+
    | exact string         |   str   |   str   |   str   |>  str  <|   str   |
    +----------------------+---------+---------+---------+---------+---------+
    | prefix               |   beg   |   beg   |   beg   |   beg   |   beg   |
    +----------------------+---------+---------+---------+---------+---------+
    | suffix               |   end   |   end   |   end   |   end   |   end   |
    +----------------------+---------+---------+---------+---------+---------+
    | substring            |   sub   |   sub   |   sub   |   sub   |   sub   |
    +----------------------+---------+---------+---------+---------+---------+
    | subdir               |   dir   |   dir   |   dir   |   dir   |   dir   |
    +----------------------+---------+---------+---------+---------+---------+
    | domain               |   dom   |   dom   |   dom   |   dom   |   dom   |
    +----------------------+---------+---------+---------+---------+---------+
    | regex                |   reg   |   reg   |   reg   |   reg   |   reg   |
    +----------------------+---------+---------+---------+---------+---------+
    | hex block            |         |         |         |   bin   |   bin   |
    +----------------------+---------+---------+---------+---------+---------+


7.1.1. Matching booleans
------------------------

In order to match a boolean, no value is needed and all values are ignored.
Boolean matching is used by default for all fetch methods of type "boolean".
When boolean matching is used, the fetched value is returned as-is, which means
that a boolean "true" will always match and a boolean "false" will never match.

Boolean matching may also be enforced using "-m bool" on fetch methods which
return an integer value. Then, integer value 0 is converted to the boolean
"false" and all other values are converted to "true".


7.1.2. Matching integers
------------------------

Integer matching applies by default to integer fetch methods. It can also be
enforced on boolean fetches using "-m int". In this case, "false" is converted
to the integer 0, and "true" is converted to the integer 1.

Integer matching also supports integer ranges and operators. Note that integer
matching only applies to positive values. A range is a value expressed with a
lower and an upper bound separated with a colon, both of which may be omitted.

For instance, "1024:65535" is a valid range to represent a range of
unprivileged ports, and "1024:" would also work. "0:1023" is a valid
representation of privileged ports, and ":1023" would also work.

As a special case, some ACL functions support decimal numbers which are in fact
two integers separated by a dot. This is used with some version checks for
instance. All integer properties apply to those decimal numbers, including
ranges and operators.

For an easier usage, comparison operators are also supported. Note that using
operators with ranges does not make much sense and is strongly discouraged.
Similarly, it does not make much sense to perform order comparisons with a set
of values.

Available operators for integer matching are :

  eq : true if the tested value equals at least one value
  ge : true if the tested value is greater than or equal to at least one value
  gt : true if the tested value is greater than at least one value
  le : true if the tested value is less than or equal to at least one value
  lt : true if the tested value is less than at least one value

For instance, the following ACL matches any negative Content-Length header :

  acl negative-length req.hdr_val(content-length) lt 0

This one matches SSL versions between 3.0 and 3.1 (inclusive) :

  acl sslv3 req.ssl_ver 3:3.1


7.1.3. Matching strings
-----------------------

String matching applies to string or binary fetch methods, and exists in 6
different forms :

  - exact match     (-m str) : the extracted string must exactly match the
    patterns;

  - substring match (-m sub) : the patterns are looked up inside the
    extracted string, and the ACL matches if any of them is found inside;

  - prefix match    (-m beg) : the patterns are compared with the beginning of
    the extracted string, and the ACL matches if any of them matches.

  - suffix match    (-m end) : the patterns are compared with the end of the
    extracted string, and the ACL matches if any of them matches.

  - subdir match    (-m dir) : the patterns are looked up anywhere inside the
    extracted string, delimited with slashes ("/"), the beginning or the end
    of the string. The ACL matches if any of them matches. As such, the string
    "/images/png/logo/32x32.png", would match "/images", "/images/png",
    "images/png", "/png/logo", "logo/32x32.png" or "32x32.png" but not "png"
    nor "32x32".

  - domain match    (-m dom) : the patterns are looked up anywhere inside the
    extracted string, delimited with dots ("."), colons (":"), slashes ("/"),
    question marks ("?"), the beginning or the end of the string. This is made
    to be used with URLs. Leading and trailing delimiters in the pattern are
    ignored. The ACL matches if any of them matches. As such, in the example
    string "http://www1.dc-eu.example.com:80/blah", the patterns "http",
    "www1", ".www1", "dc-eu", "example", "com", "80", "dc-eu.example",
    "blah", ":www1:", "dc-eu.example:80" would match, but not "eu" nor "dc".
    Using it to match domain suffixes for filtering or routing is generally
    not a good idea, as the routing could easily be fooled by prepending the
    matching prefix in front of another domain for example.

String matching applies to verbatim strings as they are passed, with the
exception of the backslash ("\") which makes it possible to escape some
characters such as the space. If the "-i" flag is passed before the first
string, then the matching will be performed ignoring the case. In order
to match the string "-i", either set it second, or pass the "--" flag
before the first string. Same applies of course to match the string "--".

Do not use string matches for binary fetches which might contain null bytes
(0x00), as the comparison stops at the occurrence of the first null byte.
Instead, convert the binary fetch to a hex string with the hex converter first.

Example:
    # matches if the string <tag> is present in the binary sample
    acl tag_found req.payload(0,0),hex -m sub 3C7461673E


7.1.4. Matching regular expressions (regexes)
---------------------------------------------

Just like with string matching, regex matching applies to verbatim strings as
they are passed, with the exception of the backslash ("\") which makes it
possible to escape some characters such as the space. If the "-i" flag is
passed before the first regex, then the matching will be performed ignoring
the case. In order to match the string "-i", either set it second, or pass
the "--" flag before the first string. Same principle applies of course to
match the string "--".


7.1.5. Matching arbitrary data blocks
-------------------------------------

It is possible to match some extracted samples against a binary block which may
not safely be represented as a string. For this, the patterns must be passed as
a series of hexadecimal digits in an even number, when the match method is set
to binary. Each sequence of two digits will represent a byte. The hexadecimal
digits may be used upper or lower case.

Example :
    # match "Hello\n" in the input stream (\x48 \x65 \x6c \x6c \x6f \x0a)
    acl hello req.payload(0,6) -m bin 48656c6c6f0a


7.1.6. Matching IPv4 and IPv6 addresses
---------------------------------------

IPv4 addresses values can be specified either as plain addresses or with a
netmask appended, in which case the IPv4 address matches whenever it is
within the network. Plain addresses may also be replaced with a resolvable
host name, but this practice is generally discouraged as it makes it more
difficult to read and debug configurations. If hostnames are used, you should
at least ensure that they are present in /etc/hosts so that the configuration
does not depend on any random DNS match at the moment the configuration is
parsed.

The dotted IPv4 address notation is supported in both regular as well as the
abbreviated form with all-0-octets omitted:

    +------------------+------------------+------------------+
    |   Example 1      |     Example 2    |     Example 3    |
    +------------------+------------------+------------------+
    |  192.168.0.1     |   10.0.0.12      |   127.0.0.1      |
    |  192.168.1       |   10.12          |   127.1          |
    |  192.168.0.1/22  |   10.0.0.12/8    |   127.0.0.1/8    |
    |  192.168.1/22    |   10.12/8        |   127.1/8        |
    +------------------+------------------+------------------+

Notice that this is different from RFC 4632 CIDR address notation in which
192.168.42/24 would be equivalent to 192.168.42.0/24.

IPv6 may be entered in their usual form, with or without a netmask appended.
Only bit counts are accepted for IPv6 netmasks. In order to avoid any risk of
trouble with randomly resolved IP addresses, host names are never allowed in
IPv6 patterns.

HAProxy is also able to match IPv4 addresses with IPv6 addresses in the
following situations :
  - tested address is IPv4, pattern address is IPv4, the match applies
    in IPv4 using the supplied mask if any.
  - tested address is IPv6, pattern address is IPv6, the match applies
    in IPv6 using the supplied mask if any.
  - tested address is IPv6, pattern address is IPv4, the match applies in IPv4
    using the pattern's mask if the IPv6 address matches with 2002:IPV4::,
    ::IPV4 or ::ffff:IPV4, otherwise it fails.
  - tested address is IPv4, pattern address is IPv6, the IPv4 address is first
    converted to IPv6 by prefixing ::ffff: in front of it, then the match is
    applied in IPv6 using the supplied IPv6 mask.


7.2. Using ACLs to form conditions
----------------------------------

Some actions are only performed upon a valid condition. A condition is a
combination of ACLs with operators. 3 operators are supported :

  - AND (implicit)
  - OR  (explicit with the "or" keyword or the "||" operator)
  - Negation with the exclamation mark ("!")

A condition is formed as a disjunctive form:

   [!]acl1 [!]acl2 ... [!]acln  { or [!]acl1 [!]acl2 ... [!]acln } ...

Such conditions are generally used after an "if" or "unless" statement,
indicating when the condition will trigger the action.

For instance, to block HTTP requests to the "*" URL with methods other than
"OPTIONS", as well as POST requests without content-length, and GET or HEAD
requests with a content-length greater than 0, and finally every request which
is not either GET/HEAD/POST/OPTIONS !

   acl missing_cl req.hdr_cnt(Content-length) eq 0
   http-request deny if HTTP_URL_STAR !METH_OPTIONS || METH_POST missing_cl
   http-request deny if METH_GET HTTP_CONTENT
   http-request deny unless METH_GET or METH_POST or METH_OPTIONS

To select a different backend for requests to static contents on the "www" site
and to every request on the "img", "video", "download" and "ftp" hosts :

   acl url_static  path_beg         /static /images /img /css
   acl url_static  path_end         .gif .png .jpg .css .js
   acl host_www    hdr_beg(host) -i www
   acl host_static hdr_beg(host) -i img. video. download. ftp.

   # now use backend "static" for all static-only hosts, and for static URLs
   # of host "www". Use backend "www" for the rest.
   use_backend static if host_static or host_www url_static
   use_backend www    if host_www

It is also possible to form rules using "anonymous ACLs". Those are unnamed ACL
expressions that are built on the fly without needing to be declared. They must
be enclosed between braces, with a space before and after each brace (because
the braces must be seen as independent words). Example :

   The following rule :

       acl missing_cl req.hdr_cnt(Content-length) eq 0
       http-request deny if METH_POST missing_cl

   Can also be written that way :

       http-request deny if METH_POST { req.hdr_cnt(Content-length) eq 0 }

It is generally not recommended to use this construct because it's a lot easier
to leave errors in the configuration when written that way. However, for very
simple rules matching only one source IP address for instance, it can make more
sense to use them than to declare ACLs with random names. Another example of
good use is the following :

   With named ACLs :

        acl site_dead nbsrv(dynamic) lt 2
        acl site_dead nbsrv(static)  lt 2
        monitor fail  if site_dead

   With anonymous ACLs :

        monitor fail if { nbsrv(dynamic) lt 2 } || { nbsrv(static) lt 2 }

See section 4.2 for detailed help on the "http-request deny" and "use_backend"
keywords.


7.3. Fetching samples
---------------------

Historically, sample fetch methods were only used to retrieve data to match
against patterns using ACLs. With the arrival of stick-tables, a new class of
sample fetch methods was created, most often sharing the same syntax as their
ACL counterpart. These sample fetch methods are also known as "fetches". As
of now, ACLs and fetches have converged. All ACL fetch methods have been made
available as fetch methods, and ACLs may use any sample fetch method as well.

This section details all available sample fetch methods and their output type.
Some sample fetch methods have deprecated aliases that are used to maintain
compatibility with existing configurations. They are then explicitly marked as
deprecated and should not be used in new setups.

The ACL derivatives are also indicated when available, with their respective
matching methods. These ones all have a well defined default pattern matching
method, so it is never necessary (though allowed) to pass the "-m" option to
indicate how the sample will be matched using ACLs.

As indicated in the sample type versus matching compatibility matrix above,
when using a generic sample fetch method in an ACL, the "-m" option is
mandatory unless the sample type is one of boolean, integer, IPv4 or IPv6. When
the same keyword exists as an ACL keyword and as a standard fetch method, the
ACL engine will automatically pick the ACL-only one by default.

Some of these keywords support one or multiple mandatory arguments, and one or
multiple optional arguments. These arguments are strongly typed and are checked
when the configuration is parsed so that there is no risk of running with an
incorrect argument (e.g. an unresolved backend name). Fetch function arguments
are passed between parenthesis and are delimited by commas. When an argument
is optional, it will be indicated below between square brackets ('[ ]'). When
all arguments are optional, the parenthesis may be omitted.

Thus, the syntax of a standard sample fetch method is one of the following :
   - name
   - name(arg1)
   - name(arg1,arg2)


7.3.1. Converters
-----------------

Sample fetch methods may be combined with transformations to be applied on top
of the fetched sample (also called "converters"). These combinations form what
is called "sample expressions" and the result is a "sample". Initially this
was only supported by "stick on" and "stick store-request" directives but this
has now be extended to all places where samples may be used (ACLs, log-format,
unique-id-format, add-header, ...).

These transformations are enumerated as a series of specific keywords after the
sample fetch method. These keywords may equally be appended immediately after
the fetch keyword's argument, delimited by a comma. These keywords can also
support some arguments (e.g. a netmask) which must be passed in parenthesis.

A certain category of converters are bitwise and arithmetic operators which
support performing basic operations on integers. Some bitwise operations are
supported (and, or, xor, cpl) and some arithmetic operations are supported
(add, sub, mul, div, mod, neg). Some comparators are provided (odd, even, not,
bool) which make it possible to report a match without having to write an ACL.

The following keywords are supported:

   keyword                                         input type   output type
------------------------------------------------+-------------+----------------
51d.single(prop[,prop*])                           string       string
add(value)                                         integer      integer
add_item(delim[,var[,suff]])                       string       string
aes_gcm_dec(bits,nonce,key,aead_tag)               binary       binary
aes_gcm_enc(bits,nonce,key,aead_tag)               binary       binary
and(value)                                         integer      integer
b64dec                                             string       binary
base2                                              binary       string
base64                                             binary       string
be2dec(separator,chunk_size[,truncate])            binary       string
le2dec(separator,chunk_size[,truncate])            binary       string
be2hex([separator[,chunk_size[,truncate]]])        binary       string
bool                                               integer      boolean
bytes(offset[,length])                             binary       binary
capture-req(id)                                    string       string
capture-res(id)                                    string       string
concat([start[,var[,end]]])                        string       string
cpl                                                integer      integer
crc32([avalanche])                                 binary       integer
crc32c([avalanche])                                binary       integer
cut_crlf                                           string       string
da-csv-conv(prop[,prop*])                          string       string
date                                               string       integer
debug([prefix][,destination])                       any          same
-- keyword -------------------------------------+- input type + output type -
digest(algorithm)                                  binary       binary
div(value)                                         integer      integer
djb2([avalanche])                                  binary       integer
even                                               integer      boolean
field(index,delimiters[,count])                    string       string
fix_is_valid                                       binary       boolean
fix_tag_value(tag)                                 binary       binary
hex                                                binary       string
hex2i                                              binary       integer
hmac(algorithm,key)                                binary       binary
host_only                                          string       string
htonl                                              integer      integer
http_date([offset[,unit]])                         integer      string
iif(true,false)                                    boolean      string
in_table([table])                                  any          boolean
ipmask(mask4[,mask6])                              address      address
json([input-code])                                 string       string
json_query(json_path[,output_type])                string       _outtype_
jwt_header_query([json_path[,output_type]])        string       string
jwt_payload_query([json_path[,output_type]])       string       string
-- keyword -------------------------------------+- input type + output type -
jwt_verify(alg,key)                                string       integer
language(value[,default])                          string       string
length                                             string       integer
lower                                              string       string
ltime(format[,offset])                             integer      string
ltrim(chars)                                       string       string
map(map_name[,default_value])                      string       string
map_match(map_name[,default_value])                _match_      string
map_match_output(map_name[,default_value])         _match_      _output_
mod(value)                                         integer      integer
mqtt_field_value(pkt_type,fieldname_or_prop_ID)    binary       binary
mqtt_is_valid                                      binary       boolean
ms_ltime(format[,offset])                          integer      string
ms_utime(format[,offset])                          integer      string
mul(value)                                         integer      integer
nbsrv                                              string       integer
neg                                                integer      integer
not                                                integer      boolean
odd                                                integer      boolean
or(value)                                          integer      integer
-- keyword -------------------------------------+- input type + output type -
param(name[,delim])                                string       string
port_only                                          string       integer
protobuf(field_number[,field_type])                binary       binary
regsub(regex,subst[,flags])                        string       string
rfc7239_field(field)                               string       string
rfc7239_is_valid                                   string       boolean
rfc7239_n2nn                                       string       address / str
rfc7239_n2np                                       string       integer / str
rfc7239_nn                                         address/str  string
rfc7239_np                                         integer/str  string
rtrim(chars)                                       string       string
sdbm([avalanche])                                  binary       integer
secure_memcmp(var)                                 string       boolean
set-var(var[,cond...])                              any          same
sha1                                               binary       binary
sha2([bits])                                       binary       binary
srv_is_up                                          string       boolean
srv_queue                                          string       integer
strcmp(var)                                        string       boolean
sub(value)                                         integer      integer
table_bytes_in_rate([table])                       any          integer
table_bytes_out_rate([table])                      any          integer
table_clr_gpc(idx[,table])                         any          integer
table_clr_gpc0([table])                            any          integer
table_clr_gpc1([table])                            any          integer
table_conn_cnt([table])                            any          integer
-- keyword -------------------------------------+- input type + output type -
table_conn_cur([table])                            any          integer
table_conn_rate([table])                           any          integer
table_expire([table[,default_value]])              any          integer
table_glitch_cnt([table])                          any          integer
table_glitch_rate([table])                         any          integer
table_gpc(idx[,table])                             any          integer
table_gpc0([table])                                any          integer
table_gpc0_rate([table])                           any          integer
table_gpc1([table])                                any          integer
table_gpc1_rate([table])                           any          integer
table_gpc_rate(idx[,table])                        any          integer
table_gpt(idx[,table])                             any          integer
table_gpt0([table])                                any          integer
table_http_err_cnt([table])                        any          integer
table_http_err_rate([table])                       any          integer
table_http_fail_cnt([table])                       any          integer
table_http_fail_rate([table])                      any          integer
table_http_req_cnt([table])                        any          integer
table_http_req_rate([table])                       any          integer
table_idle([table[,default_value]])                any          integer
table_inc_gpc(idx[,table])                         any          integer
table_inc_gpc0([table])                            any          integer
table_inc_gpc1([table])                            any          integer
table_kbytes_in([table])                           any          integer
-- keyword -------------------------------------+- input type + output type -
table_kbytes_out([table])                          any          integer
table_server_id([table])                           any          integer
table_sess_cnt([table])                            any          integer
table_sess_rate([table])                           any          integer
table_trackers([table])                            any          integer
ub64dec                                            string       string
ub64enc                                            string       string
ungrpc(field_number[,field_type])                  binary       binary / int
unset-var(var)                                      any          same
upper                                              string       string
url_dec([in_form])                                 string       string
url_enc([enc_type])                                string       string
us_ltime(format[,offset])                          integer      string
us_utime(format[,offset])                          integer      string
utime(format[,offset])                             integer      string
when(condition)                                     any          same
word(index,delimiters[,count])                     string       string
wt6([avalanche])                                   binary       integer
x509_v_err_str                                     integer      string
xor(value)                                         integer      integer
-- keyword -------------------------------------+- input type + output type -
xxh3([seed])                                       binary       integer
xxh32([seed])                                      binary       integer
xxh64([seed])                                      binary       integer

The detailed list of converter keywords follows:

51d.single(<prop>[,<prop>*])
  Returns values for the properties requested as a string, where values are
  separated by the delimiter specified with "51degrees-property-separator".
  The device is identified using the User-Agent header passed to the
  converter. The function can be passed up to five property names, and if a
  property name can't be found, the value "NoData" is returned.

  Example :
    # Here the header "X-51D-DeviceTypeMobileTablet" is added to the request,
    # containing values for the three properties requested by using the
    # User-Agent passed to the converter.
    frontend http-in
      bind *:8081
      default_backend servers
      http-request set-header X-51D-DeviceTypeMobileTablet \
        %[req.fhdr(User-Agent),51d.single(DeviceType,IsMobile,IsTablet)]

add(<value>)
  Adds <value> to the input value of type signed integer, and returns the
  result as a signed integer. <value> can be a numeric value or a variable
  name. See section 2.8 about variables for details.

add_item(<delim>[,<var>[,<suff>]])
  Concatenates a minimum of 2 and up to 3 fields after the current sample which
  is then turned into a string. The first one, <delim>, is a constant string,
  that will be appended immediately after the existing sample if an existing
  sample is not empty and either the <var> or the <suff> is not empty. The
  second one, <var>, is a variable name. The variable will be looked up, its
  contents converted to a string, and it will be appended immediately after
  the <delim> part. If the variable is not found, nothing is appended. It is
  optional and may optionally be followed by a constant string <suff>, however
  if <var> is omitted, then <suff> is mandatory. This converter is similar to
  the concat converter and can be used to build new variables made of a
  succession of other variables but the main difference is that it does the
  checks if adding a delimiter makes sense as wouldn't be the case if e.g. the
  current sample is empty. That situation would require 2 separate rules using
  concat converter where the first rule would have to check if the current
  sample string is empty before adding a delimiter. If commas or closing
  parenthesis are needed as delimiters, they must be protected by quotes or
  backslashes, themselves protected so that they are not stripped by the first
  level parser (please see section 2.2 for quoting and escaping). See examples
  below.

  Example:
    http-request set-var(req.tagged) 'var(req.tagged),add_item(",",req.score1,"(site1)") if src,in_table(site1)'
    http-request set-var(req.tagged) 'var(req.tagged),add_item(",",req.score2,"(site2)") if src,in_table(site2)'
    http-request set-var(req.tagged) 'var(req.tagged),add_item(",",req.score3,"(site3)") if src,in_table(site3)'
    http-request set-header x-tagged %[var(req.tagged)]

    http-request set-var(req.tagged) 'var(req.tagged),add_item(",",req.score1),add_item(",",req.score2)'
    http-request set-var(req.tagged) 'var(req.tagged),add_item(",",,(site1))' if src,in_table(site1)

aes_gcm_dec(<bits>,<nonce>,<key>,<aead_tag>)
  Decrypts the raw byte input using the AES128-GCM, AES192-GCM or
  AES256-GCM algorithm, depending on the <bits> parameter. All other parameters
  need to be base64 encoded and the returned result is in raw byte format.
  If the <aead_tag> validation fails, the converter doesn't return any data.
  The <nonce>, <key> and <aead_tag> can either be strings or variables. This
  converter requires at least OpenSSL 1.0.1.

  Example:
    http-response set-header X-Decrypted-Text %[var(txn.enc),\
      aes_gcm_dec(128,txn.nonce,Zm9vb2Zvb29mb29wZm9vbw==,txn.aead_tag)]

aes_gcm_enc(<bits>,<nonce>,<key>,<aead_tag>)
  Encrypts the raw byte input using the AES128-GCM, AES192-GCM or
  AES256-GCM algorithm, depending on the <bits> parameter. <nonce> and <key>
  parameters must be base64 encoded. Last parameter, <aead_tag>, must be a
  variable. The AEAD tag will be stored base64 encoded into that variable.
  The returned result is in raw byte format. The <nonce> and <key> can either
  be strings or variables. This converter requires at least OpenSSL 1.0.1.

  Example:
    http-response set-header X-Encrypted-Text %[var(txn.plain),\
      aes_gcm_enc(128,txn.nonce,Zm9vb2Zvb29mb29wZm9vbw==,txn.aead_tag)]

and(<value>)
  Performs a bitwise "AND" between <value> and the input value of type signed
  integer, and returns the result as an signed integer. <value> can be a
  numeric value or a variable name. See section 2.8 about variables for details.

b64dec
  Converts (decodes) a base64 encoded input string to its binary
  representation. It performs the inverse operation of base64().
  For base64url("URL and Filename Safe Alphabet" (RFC 4648)) variant
  see "ub64dec".

base2
  Converts a binary input sample to a binary string containing eight binary
  digits per input byte. It is used to be able to perform longest prefix match
  on types where the native representation does not allow prefix matching, for
  example IP prefixes.

base64
  Converts a binary input sample to a base64 string. It is used to log or
  transfer binary content in a way that can be reliably transferred (e.g.
  an SSL ID can be copied in a header). For base64url("URL and Filename
  Safe Alphabet" (RFC 4648)) variant see "ub64enc".

be2dec(<separator>,<chunk_size>[,<truncate>])
  Converts big-endian binary input sample to a string containing an unsigned
  integer number per <chunk_size> input bytes. <separator> is put every
  <chunk_size> binary input bytes if specified. <truncate> flag indicates
  whatever binary input is truncated at <chunk_size> boundaries. <chunk_size>
  maximum value is limited by the size of long long int (8 bytes).

  Example:
      bin(01020304050607),be2dec(:,2)   # 258:772:1286:7
      bin(01020304050607),be2dec(-,2,1) # 258-772-1286
      bin(01020304050607),be2dec(,2,1)  # 2587721286
      bin(7f000001),be2dec(.,1)         # 127.0.0.1

le2dec(<separator>,<chunk_size>[,<truncate>])
  Converts little-endian binary input sample to a string containing an unsigned
  integer number per <chunk_size> input bytes. <separator> is inserted every
  <chunk_size> binary input bytes if specified. The <truncate> flag indicates
  whether the binary input is truncated at <chunk_size> boundaries. The maximum
  value for <chunk_size> is limited by the size of long long int (8 bytes).

  Example:
      bin(01020304050607),le2dec(:,2)   # 513:1284:2055:7
      bin(01020304050607),le2dec(-,2,1) # 513-1284-2055
      bin(01020304050607),le2dec(,2,1)  # 51312842055
      bin(7f000001),le2dec(.,1)         # 127.0.0.1

be2hex([<separator>[,<chunk_size>[,<truncate>]]])
  Converts big-endian binary input sample to a hex string containing two hex
  digits per input byte. It is used to log or transfer hex dumps of some
  binary input data in a way that can be reliably transferred (e.g. an SSL ID
  can be copied in a header). <separator> is put every <chunk_size> binary
  input bytes if specified. <truncate> flag indicates whatever binary input is
  truncated at <chunk_size> boundaries.

  Example:
      bin(01020304050607),be2hex         # 01020304050607
      bin(01020304050607),be2hex(:,2)    # 0102:0304:0506:07
      bin(01020304050607),be2hex(--,2,1) # 0102--0304--0506
      bin(0102030405060708),be2hex(,3,1) # 010203040506

bool
  Returns a boolean TRUE if the input value of type signed integer is
  non-null, otherwise returns FALSE. Used in conjunction with and(), it can be
  used to report true/false for bit testing on input values (e.g. verify the
  presence of a flag).

bytes(<offset>[,<length>])
  Extracts some bytes from an input binary sample. The result is a binary
  sample starting at an offset (in bytes) of the original sample and
  optionally truncated at the given length. <offset> and <length> can be numeric
  values or variable names. The converter returns an empty sample if either
  <offset> or <length> is invalid. Invalid <offset> means a negative value or a
  value >= length of the input sample. Invalid <length> means a negative value
  or, in some cases, a value bigger than the length of the input sample.

  Example:
      http-request set-var(txn.input) req.hdr(input) # let's say input is "012345"

      http-response set-header bytes_0 "%[var(txn.input),bytes(0)]"  # outputs "012345"
      http-response set-header bytes_1_3 "%[var(txn.input),bytes(1,3)]"  # outputs "123"

      http-response set-var(txn.var_start) int(1)
      http-response set-var(txn.var_length) int(3)
      http-response set-header bytes_var1_var3    "%[var(txn.input),bytes(txn.var_start,txn.var_length)]"  # outputs "123"

capture-req(<id>)
  Capture the string entry in the request slot <id> and returns the entry as
  is. If the slot doesn't exist, the capture fails silently.

  See also: "declare capture", "http-request capture",
            "http-response capture", "capture.req.hdr" and
            "capture.res.hdr" (sample fetches).

capture-res(<id>)
  Capture the string entry in the response slot <id> and returns the entry as
  is. If the slot doesn't exist, the capture fails silently.

  See also: "declare capture", "http-request capture",
            "http-response capture", "capture.req.hdr" and
            "capture.res.hdr" (sample fetches).

concat([<start>[,<var>[,<end>]]])
  Concatenates up to 3 fields after the current sample which is then turned to
  a string. The first one, <start>, is a constant string, that will be appended
  immediately after the existing sample. It may be omitted if not used. The
  second one, <var>, is a variable name. The variable will be looked up, its
  contents converted to a string, and it will be appended immediately after the
  <first> part. If the variable is not found, nothing is appended. It may be
  omitted as well. The third field, <end> is a constant string that will be
  appended after the variable. It may also be omitted. Together, these elements
  allow to concatenate variables with delimiters to an existing set of
  variables. This can be used to build new variables made of a succession of
  other variables, such as colon-delimited values. If commas or closing
  parenthesis are needed as delimiters, they must be protected by quotes or
  backslashes, themselves protected so that they are not stripped by the first
  level parser. This is often used to build composite variables from other
  ones, but sometimes using a format string with multiple fields may be more
  convenient. See examples below.

  Example:
    tcp-request session set-var(sess.src) src
    tcp-request session set-var(sess.dn)  ssl_c_s_dn
    tcp-request session set-var(txn.sig) str(),concat(<ip=,sess.ip,>),concat(<dn=,sess.dn,>)
    tcp-request session set-var(txn.ipport) "str(),concat('addr=(',sess.ip),concat(',',sess.port,')')"
    tcp-request session set-var-fmt(txn.ipport) "addr=(%[sess.ip],%[sess.port])"  ## does the same
    http-request set-header x-hap-sig %[var(txn.sig)]

cpl
  Takes the input value of type signed integer, applies a ones-complement
  (flips all bits) and returns the result as an signed integer.

crc32([<avalanche>])
  Hashes a binary input sample into an unsigned 32-bit quantity using the CRC32
  hash function. Optionally, it is possible to apply a full avalanche hash
  function to the output if the optional <avalanche> argument equals 1. This
  converter uses the same functions as used by the various hash-based load
  balancing algorithms, so it will provide exactly the same results. It is
  provided for compatibility with other software which want a CRC32 to be
  computed on some input keys, so it follows the most common implementation as
  found in Ethernet, Gzip, PNG, etc... It is slower than the other algorithms
  but may provide a better or at least less predictable distribution. It must
  not be used for security purposes as a 32-bit hash is trivial to break. See
  also "djb2", "sdbm", "wt6", "crc32c" and the "hash-type" directive.

crc32c([<avalanche>])
  Hashes a binary input sample into an unsigned 32-bit quantity using the CRC32C
  hash function. Optionally, it is possible to apply a full avalanche hash
  function to the output if the optional <avalanche> argument equals 1. This
  converter uses the same functions as described in RFC4960, Appendix B [8].
  It is provided for compatibility with other software which want a CRC32C to be
  computed on some input keys. It is slower than the other algorithms and it must
  not be used for security purposes as a 32-bit hash is trivial to break. See
  also "djb2", "sdbm", "wt6", "crc32" and the "hash-type" directive.

cut_crlf
  Cuts the string representation of the input sample on the first carriage
  return ('\r') or newline ('\n') character found. Only the string length is
  updated.

da-csv-conv(<prop>[,<prop>*])
  Asks the DeviceAtlas converter to identify the User Agent string passed on
  input, and to emit a string made of the concatenation of the properties
  enumerated in argument, delimited by the separator defined by the global
  keyword "deviceatlas-property-separator", or by default the pipe character
  ('|'). There's a limit of 12 different properties imposed by the HAProxy
  configuration language.

  Example:
    frontend www
      bind *:8881
      default_backend servers
      http-request set-header X-DeviceAtlas-Data %[req.fhdr(User-Agent),da-csv(primaryHardwareType,osName,osVersion,browserName,browserVersion,browserRenderingEngine)]

date
  This converter is used to convert a date from an HTTP header. It can be an IMF
  date, an ASCTIME date or a RFC850 date. It will output an UNIX timestamp.

  Example:
     http-request return lf-string "%[str('Sun, 06 Nov 1994 08:49:37 GMT'),date]\n" content-type text/plain

debug([<prefix][,<destination>])
  This converter is used as debug tool. It takes a capture of the input sample
  and sends it to event sink <destination>, which may designate a ring buffer
  such as "buf0", as well as "stdout", or "stderr". Available sinks may be
  checked at run time by issuing "show events" on the CLI. When not specified,
  the output will be "buf0", which may be consulted via the CLI's "show events"
  command. An optional prefix <prefix> may be passed to help distinguish
  outputs from multiple expressions. It will then appear before the colon in
  the output message. The input sample is passed as-is on the output, so that
  it is safe to insert the debug converter anywhere in a chain, even with non-
  printable sample types.

  Example:
    tcp-request connection track-sc0 src,debug(track-sc)

digest(<algorithm>)
  Converts a binary input sample to a message digest. The result is a binary
  sample. The <algorithm> must be an OpenSSL message digest name (e.g. sha256).

  Please note that this converter is only available when HAProxy has been
  compiled with USE_OPENSSL.

div(<value>)
  Divides the input value of type signed integer by <value>, and returns the
  result as an signed integer. If <value> is null, the largest unsigned
  integer is returned (typically 2^63-1). <value> can be a numeric value or a
  variable name. See section 2.8 about variables for details.

djb2([<avalanche>])
  Hashes a binary input sample into an unsigned 32-bit quantity using the DJB2
  hash function. Optionally, it is possible to apply a full avalanche hash
  function to the output if the optional <avalanche> argument equals 1. This
  converter uses the same functions as used by the various hash-based load
  balancing algorithms, so it will provide exactly the same results. It is
  mostly intended for debugging, but can be used as a stick-table entry to
  collect rough statistics. It must not be used for security purposes as a
  32-bit hash is trivial to break. See also "crc32", "sdbm", "wt6", "crc32c",
  and the "hash-type" directive.

even
  Returns a boolean TRUE if the input value of type signed integer is even
  otherwise returns FALSE. It is functionally equivalent to "not,and(1),bool".

field(<index>,<delimiters>[,<count>])
  Extracts the substring at the given index counting from the beginning
  (positive index) or from the end (negative index) considering given delimiters
  from an input string. Indexes start at 1 or -1 and delimiters are a string
  formatted list of chars. Optionally you can specify <count> of fields to
  extract (default: 1). Value of 0 indicates extraction of all remaining
  fields.

  Example :
      str(f1_f2_f3__f5),field(4,_)    # <empty>
      str(f1_f2_f3__f5),field(5,_)    # f5
      str(f1_f2_f3__f5),field(2,_,0)  # f2_f3__f5
      str(f1_f2_f3__f5),field(2,_,2)  # f2_f3
      str(f1_f2_f3__f5),field(-2,_,3) # f2_f3_
      str(f1_f2_f3__f5),field(-3,_,0) # f1_f2_f3

fix_is_valid
  Parses a binary payload and performs sanity checks regarding FIX (Financial
  Information eXchange):

  - checks that all tag IDs and values are not empty and the tags IDs are well
    numeric
  - checks the BeginString tag is the first tag with a valid FIX version
  - checks the BodyLength tag is the second one with the right body length
  - checks the MsgType tag is the third tag.
  - checks that last tag in the message is the CheckSum tag with a valid
    checksum

  Due to current HAProxy design, only the first message sent by the client and
  the server can be parsed.

  This converter returns a boolean, true if the payload contains a valid FIX
  message, false if not.

  See also the fix_tag_value converter.

  Example:
      tcp-request inspect-delay 10s
      tcp-request content reject unless { req.payload(0,0),fix_is_valid }

fix_tag_value(<tag>)
  Parses a FIX (Financial Information eXchange) message and extracts the value
  from the tag <tag>. <tag> can be a string or an integer pointing to the
  desired tag. Any integer value is accepted, but only the following strings
  are translated into their integer equivalent: BeginString, BodyLength,
  MsgType, SenderCompID, TargetCompID, CheckSum. More tag names can be easily
  added.

  Due to current HAProxy design, only the first message sent by the client and
  the server can be parsed. No message validation is performed by this
  converter. It is highly recommended to validate the message first using
  fix_is_valid converter.

  See also the fix_is_valid converter.

  Example:
      tcp-request inspect-delay 10s
      tcp-request content reject unless { req.payload(0,0),fix_is_valid }
      # MsgType tag ID is 35, so both lines below will return the same content
      tcp-request content set-var(txn.foo) req.payload(0,0),fix_tag_value(35)
      tcp-request content set-var(txn.bar) req.payload(0,0),fix_tag_value(MsgType)

hex
  Converts a binary input sample to a hex string containing two hex digits per
  input byte. It is used to log or transfer hex dumps of some binary input data
  in a way that can be reliably transferred (e.g. an SSL ID can be copied in a
  header).

hex2i
  Converts a hex string containing two hex digits per input byte to an
  integer. If the input value cannot be converted, then zero is returned.

hmac(<algorithm>,<key>)
  Converts a binary input sample to a message authentication code with the given
  key. The result is a binary sample. The <algorithm> must be one of the
  registered OpenSSL message digest names (e.g. sha256). The <key> parameter must
  be base64 encoded and can either be a string or a variable.

  Please note that this converter is only available when HAProxy has been
  compiled with USE_OPENSSL.

host_only
  Converts a string which contains a Host header value and removes its port.
  The input must respect the format of the host header value
  (rfc9110#section-7.2). It will support that kind of input: hostname,
  hostname:80, 127.0.0.1, 127.0.0.1:80, [::1], [::1]:80.

  This converter also sets the string in lowercase.

  See also: "port_only" converter which will return the port.

htonl
  Converts the input integer value to its 32-bit binary representation in the
  network byte order. Because sample fetches own signed 64-bit integer, when
  this converter is used, the input integer value is first casted to an
  unsigned 32-bit integer.

http_date([<offset[,<unit>]])
  Converts an integer supposed to contain a date since epoch to a string
  representing this date in a format suitable for use in HTTP header fields. If
  an offset value is specified, then it is added to the date before the
  conversion is operated. This is particularly useful to emit Date header fields,
  Expires values in responses when combined with a positive offset, or
  Last-Modified values when the offset is negative.
  If a unit value is specified, then consider the timestamp as either
  "s" for seconds (default behavior), "ms" for milliseconds, or "us" for
  microseconds since epoch. Offset is assumed to have the same unit as
  input timestamp.

iif(<true>,<false>)
  Returns the <true> string if the input value is true. Returns the <false>
  string otherwise.

  Example:
    http-request set-header x-forwarded-proto %[ssl_fc,iif(https,http)]

in_table([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table, a
  boolean false is returned. Otherwise a boolean true is returned. This can be
  used to verify the presence of a certain key in a table tracking some
  elements (e.g. whether or not a source IP address or an Authorization header
  was already seen).

ipmask(<mask4>[,<mask6>])
  Apply a mask to an IP address, and use the result for lookups and storage.
  This can be used to make all hosts within a certain mask to share the same
  table entries and as such use the same server. The mask4 can be passed in
  dotted form (e.g. 255.255.255.0) or in CIDR form (e.g. 24). The mask6 can
  be passed in quadruplet form (e.g. ffff:ffff::) or in CIDR form (e.g. 64).
  If no mask6 is given IPv6 addresses will fail to convert for backwards
  compatibility reasons.

json([<input-code>])
  Escapes the input string and produces an ASCII output string ready to use as a
  JSON string. The converter tries to decode the input string according to the
  <input-code> parameter. It can be "ascii", "utf8", "utf8s", "utf8p" or
  "utf8ps". The "ascii" decoder never fails. The "utf8" decoder detects 3 types
  of errors:
   - bad UTF-8 sequence (lone continuation byte, bad number of continuation
     bytes, ...)
   - invalid range (the decoded value is within a UTF-8 prohibited range),
   - code overlong (the value is encoded with more bytes than necessary).

  The UTF-8 JSON encoding can produce a "too long value" error when the UTF-8
  character is greater than 0xffff because the JSON string escape specification
  only authorizes 4 hex digits for the value encoding. The UTF-8 decoder exists
  in 4 variants designated by a combination of two suffix letters : "p" for
  "permissive" and "s" for "silently ignore". The behaviors of the decoders
  are :
   - "ascii"  : never fails;
   - "utf8"   : fails on any detected errors;
   - "utf8s"  : never fails, but removes characters corresponding to errors;
   - "utf8p"  : accepts and fixes the overlong errors, but fails on any other
                error;
   - "utf8ps" : never fails, accepts and fixes the overlong errors, but removes
                characters corresponding to the other errors.

  This converter is particularly useful for building properly escaped JSON for
  logging to servers which consume JSON-formatted traffic logs.

  Example:
     capture request header Host len 15
     capture request header user-agent len 150
     log-format '{"ip":"%[src]","user-agent":"%[capture.req.hdr(1),json(utf8s)]"}'

  Input request from client 127.0.0.1:
     GET / HTTP/1.0
     User-Agent: Very "Ugly" UA 1/2

  Output log:
     {"ip":"127.0.0.1","user-agent":"Very \"Ugly\" UA 1\/2"}

json_query(<json_path>[,<output_type>])
  The json_query converter supports the JSON types string, boolean, number
  and array. Floating point numbers will be returned as a string. By
  specifying the output_type 'int' the value will be converted to an
  Integer. Arrays will be returned as string, starting and ending with a
  square brackets. The content is a CSV. Depending on the data type, the
  array values might be quoted. If the array values are complex types,
  the string contains the complete json representation of each value
  separated by a comma. Example result for a roles query to a JWT:

     ["manage-account","manage-account-links","view-profile"]

  If conversion is not possible the json_query converter fails.

  <json_path> must be a valid JSON Path string as defined in
  https://datatracker.ietf.org/doc/draft-ietf-jsonpath-base/

  Note: depending on the context and the underlying implementation, extraction
        of duplicate JSON keys is undefined and might return the first, last,
        or any other occurrence of the same key from the input content, and if
        key names are passed encoded, they might not always be matched. In
        short, this converter is not suitable for content sanitization.

  Example:
     # get a integer value from the request body
     # "{"integer":4}" => 5
     http-request set-var(txn.pay_int) req.body,json_query('$.integer','int'),add(1)

     # get a key with '.' in the name
     # {"my.key":"myvalue"} => myvalue
     http-request set-var(txn.pay_mykey) req.body,json_query('$.my\\.key')

     # {"boolean-false":false} => 0
     http-request set-var(txn.pay_boolean_false) req.body,json_query('$.boolean-false')

     # get the value of the key 'iss' from a JWT Bearer token
     http-request set-var(txn.token_payload) req.hdr(Authorization),word(2,.),ub64dec,json_query('$.iss')

jwt_header_query([<json_path>[,<output_type>]])
  When given a JSON Web Token (JWT) in input, either returns the decoded header
  part of the token (the first base64-url encoded part of the JWT) if no
  parameter is given, or performs a json_query on the decoded header part of
  the token. See "json_query" converter for details about the accepted
  json_path and output_type parameters.

  Please note that this converter is only available when HAProxy has been
  compiled with USE_OPENSSL.

jwt_payload_query([<json_path>[,<output_type>]])
  When given a JSON Web Token (JWT) in input, either returns the decoded
  payload part of the token (the second base64-url encoded part of the JWT) if
  no parameter is given, or performs a json_query on the decoded payload part
  of the token. See "json_query" converter for details about the accepted
  json_path and output_type parameters.

  Please note that this converter is only available when HAProxy has been
  compiled with USE_OPENSSL.

jwt_verify(<alg>,<key>)
  Performs a signature verification for the JSON Web Token (JWT) given in input
  by using the <alg> algorithm and the <key> parameter, which should either
  hold a secret or a path to a public key. The public key should either be in
  the PKCS#1 format (for RSA keys, starting with BEGIN RSA PUBLIC KEY) or SPKI
  format (Subject Public Key Info, starting with BEGIN PUBLIC KEY).
  Returns 1 in case of verification success, 0 in case of verification failure
  and a strictly negative value for any other error. Because of all those
  non-null error return values, the result of this converter should never be
  converted to a boolean. See below for a full list of the possible return
  values.

  For now, only JWS tokens using the Compact Serialization format can be
  processed (three dot-separated base64-url encoded strings). All the
  algorithms mentioned in section 3.1 of RFC7518 are managed (HS, ES, RS and PS
  with the 256, 384 or 512 key sizes, as well as the special "none" case).

  If the used algorithm is of the HMAC family, <key> should be the secret used
  in the HMAC signature calculation. Otherwise, <key> should be the path to the
  public key that can be used to validate the token's signature. All the public
  keys that might be used to verify JWTs must be known during init in order to
  be added into a dedicated cache so that no disk access is required during
  runtime. For this reason, any used public key must be mentioned explicitly at
  least once in a jwt_verify call. Passing an intermediate variable as second
  parameter is then not advised.

  This converter only verifies the signature of the token and does not perform
  a full JWT validation as specified in section 7.2 of RFC7519. We do not
  ensure that the header and payload contents are fully valid JSONs once
  decoded for instance, and no checks are performed regarding their respective
  contents.

  The possible return values are the following :

  +----+----------------------------------------------------------------------+
  | ID | message                                                              |
  +----+----------------------------------------------------------------------+
  |  0 | "Verification failure"                                               |
  |  1 | "Verification success"                                               |
  | -1 | "Unknown algorithm (not mentioned in RFC7518)"                       |
  | -2 | "Unmanaged algorithm"                                                |
  | -3 | "Invalid token"                                                      |
  | -4 | "Out of memory"                                                      |
  | -5 | "Unknown certificate"                                                |
  +----+----------------------------------------------------------------------+

  Please note that this converter is only available when HAProxy has been
  compiled with USE_OPENSSL.

  Example:
     # Get a JWT from the authorization header, extract the "alg" field of its
     # JOSE header and use a public certificate to verify a signature
     http-request set-var(txn.bearer) http_auth_bearer
     http-request set-var(txn.jwt_alg) var(txn.bearer),jwt_header_query('$.alg')
     http-request deny unless { var(txn.jwt_alg) -m str "RS256" }
     http-request deny unless { var(txn.bearer),jwt_verify(txn.jwt_alg,"/path/to/pubkey.pem") 1 }

language(<value>[,<default>])
  Returns the value with the highest q-factor from a list as extracted from the
  "accept-language" header using "req.fhdr". Values with no q-factor have a
  q-factor of 1. Values with a q-factor of 0 are dropped. Only values which
  belong to the list of semi-colon delimited <values> will be considered. The
  argument <value> syntax is "lang[;lang[;lang[;...]]]". If no value matches the
  given list and a default value is provided, it is returned. Note that language
  names may have a variant after a dash ('-'). If this variant is present in the
  list, it will be matched, but if it is not, only the base language is checked.
  The match is case-sensitive, and the output string is always one of those
  provided in arguments. The ordering of arguments is meaningless, only the
  ordering of the values in the request counts, as the first value among
  multiple sharing the same q-factor is used.

  Example :

    # this configuration switches to the backend matching a
    # given language based on the request :

    acl es req.fhdr(accept-language),language(es;fr;en) -m str es
    acl fr req.fhdr(accept-language),language(es;fr;en) -m str fr
    acl en req.fhdr(accept-language),language(es;fr;en) -m str en
    use_backend spanish if es
    use_backend french  if fr
    use_backend english if en
    default_backend choose_your_language

length
  Get the length of the string. This can only be placed after a string
  sample fetch function or after a transformation keyword returning a string
  type. The result is of type integer.

lower
  Convert a string sample to lower case. This can only be placed after a string
  sample fetch function or after a transformation keyword returning a string
  type. The result is of type string.

ltime(<format>[,<offset>])
  Converts an integer supposed to contain a date since epoch to a string
  representing this date in local time using a format defined by the <format>
  string using strftime(3). The purpose is to allow any date format to be used
  in logs. An optional <offset> in seconds may be applied to the input date
  (positive or negative). See the strftime() man page for the format supported
  by your operating system. See also the utime converter.

  Example :

      # Emit two colons, one with the local time and another with ip:port
      # e.g.  20140710162350 127.0.0.1:57325
      log-format %[date,ltime(%Y%m%d%H%M%S)]\ %ci:%cp

ltrim(<chars>)
  Skips any characters from <chars> from the beginning of the string
  representation of the input sample.

map(<map_name>[,<default_value>])
map_<match_type>(<map_name>[,<default_value>])
map_<match_type>_<output_type>(<map_name>[,<default_value>])
  Search the input value from <map_name> using the <match_type> matching
  method, and return the associated value converted to the type <output_type>.
  If the input value cannot be found in the <map_name>, the converter returns
  the <default_value>. If the <default_value> is not set, the converter fails
  and acts as if no input value could be fetched. If the <match_type> is not
  set, it defaults to "str". Likewise, if the <output_type> is not set, it
  defaults to "str". For convenience, the "map" keyword is an alias for
  "map_str" and maps a string to another string. <map_name> must follow the
  format described in 2.7. about name format for maps and ACLs

  It is important to avoid overlapping between the keys : IP addresses and
  strings are stored in trees, so the first of the finest match will be used.
  Other keys are stored in lists, so the first matching occurrence will be used.

  The following array contains the list of all map functions available sorted by
  input type, match type and output type.

  input type | match method | output type str | output type int | output type ip | output type key
  -----------+--------------+-----------------+-----------------+----------------+----------------
    str      | str          | map_str         | map_str_int     | map_str_ip     | map_str_key
  -----------+--------------+-----------------+-----------------+----------------+----------------
    str      | beg          | map_beg         | map_beg_int     | map_end_ip     | map_end_key
  -----------+--------------+-----------------+-----------------+----------------+----------------
    str      | sub          | map_sub         | map_sub_int     | map_sub_ip     | map_sub_key
  -----------+--------------+-----------------+-----------------+----------------+----------------
    str      | dir          | map_dir         | map_dir_int     | map_dir_ip     | map_dir_key
  -----------+--------------+-----------------+-----------------+----------------+----------------
    str      | dom          | map_dom         | map_dom_int     | map_dom_ip     | map_dom_key
  -----------+--------------+-----------------+-----------------+----------------+----------------
    str      | end          | map_end         | map_end_int     | map_end_ip     | map_end_key
  -----------+--------------+-----------------+-----------------+----------------+----------------
    str      | reg          | map_reg         | map_reg_int     | map_reg_ip     | map_reg_key
  -----------+--------------+-----------------+-----------------+----------------+----------------
    str      | reg          | map_regm        | map_reg_int     | map_reg_ip     | map_reg_key
  -----------+--------------+-----------------+-----------------+----------------+----------------
    int      | int          | map_int         | map_int_int     | map_int_ip     | map_int_key
  -----------+--------------+-----------------+-----------------+----------------+----------------
    ip       | ip           | map_ip          | map_ip_int      | map_ip_ip      | map_ip_key
  -----------+--------------+-----------------+-----------------+----------------+----------------

  The special map called "map_regm" expect matching zone in the regular
  expression and modify the output replacing back reference (like "\1") by
  the corresponding match text.

  Output type "key" means that it is the matched entry's key (as found in the
  map file) that will be returned as a string instead of the value. Note that
  optional <default_value> argument is not supported when "key" output type is
  used.

  Files referenced by <map_name> contains one key + value per line. Lines which
  start with '#' are ignored, just like empty lines. Leading tabs and spaces
  are stripped. The key is then the first "word" (series of non-space/tabs
  characters), and the value is what follows this series of space/tab till the
  end of the line excluding trailing spaces/tabs.

  Example :

     # this is a comment and is ignored
        2.22.246.0/23    United Kingdom      \n
     <-><-----------><--><------------><---->
      |       |       |         |        `- trailing spaces ignored
      |       |       |         `---------- value
      |       |       `-------------------- middle spaces ignored
      |       `---------------------------- key
      `------------------------------------ leading spaces ignored

mod(<value>)
  Divides the input value of type signed integer by <value>, and returns the
  remainder as an signed integer. If <value> is null, then zero is returned.
  <value> can be a numeric value or a variable name. See section 2.8 about
  variables for details.

mqtt_field_value(<packettype>,<fieldname_or_property_ID>)
  Returns value of <fieldname> found in input MQTT payload of type
  <packettype>.
  <packettype> can be either a string (case insensitive matching) or a numeric
  value corresponding to the type of packet we're supposed to extract data
  from.
  Supported string and integers can be found here:
  https://docs.oasis-open.org/mqtt/mqtt/v3.1.1/os/mqtt-v3.1.1-os.html#_Toc398718021
  https://docs.oasis-open.org/mqtt/mqtt/v5.0/os/mqtt-v5.0-os.html#_Toc3901022

  <fieldname> depends on <packettype> and can be any of the following below.
  (note that <fieldname> matching is case insensitive).
  <property id> can only be found in MQTT v5.0 streams. check this table:
  https://docs.oasis-open.org/mqtt/mqtt/v5.0/os/mqtt-v5.0-os.html#_Toc3901029

  - CONNECT (or 1): flags, protocol_name, protocol_version, client_identifier,
                    will_topic, will_payload, username, password, keepalive
                    OR any property ID as a numeric value (for MQTT v5.0
                    packets only):
                       17: Session Expiry Interval
                       33: Receive Maximum
                       39: Maximum Packet Size
                       34: Topic Alias Maximum
                       25: Request Response Information
                       23: Request Problem Information
                       21: Authentication Method
                       22: Authentication Data
                       18: Will Delay Interval
                        1: Payload Format Indicator
                        2: Message Expiry Interval
                        3: Content Type
                        8: Response Topic
                        9: Correlation Data
                    Not supported yet:
                       38: User Property

  - CONNACK (or 2): flags, protocol_version, reason_code
                    OR any property ID as a numeric value (for MQTT v5.0
                    packets only):
                       17: Session Expiry Interval
                       33: Receive Maximum
                       36: Maximum QoS
                       37: Retain Available
                       39: Maximum Packet Size
                       18: Assigned Client Identifier
                       34: Topic Alias Maximum
                       31: Reason String
                       40; Wildcard Subscription Available
                       41: Subscription Identifiers Available
                       42: Shared Subscription Available
                       19: Server Keep Alive
                       26: Response Information
                       28: Server Reference
                       21: Authentication Method
                       22: Authentication Data
                    Not supported yet:
                       38: User Property

  Due to current HAProxy design, only the first message sent by the client and
  the server can be parsed. Thus this converter can extract data only from
  CONNECT and CONNACK packet types. CONNECT is the first message sent by the
  client and CONNACK is the first response sent by the server.

  Example:

      acl data_in_buffer req.len ge 4
      tcp-request content set-var(txn.username) \
              req.payload(0,0),mqtt_field_value(connect,protocol_name) \
              if data_in_buffer
      # do the same as above
      tcp-request content set-var(txn.username) \
              req.payload(0,0),mqtt_field_value(1,protocol_name) \
              if data_in_buffer

mqtt_is_valid
  Checks that the binary input is a valid MQTT packet. It returns a boolean.

  Due to current HAProxy design, only the first message sent by the client and
  the server can be parsed. Thus this converter can extract data only from
  CONNECT and CONNACK packet types. CONNECT is the first message sent by the
  client and CONNACK is the first response sent by the server.

  Only MQTT 3.1, 3.1.1 and 5.0 are supported.

  Example:

      acl data_in_buffer req.len ge 4
      tcp-request content reject unless { req.payload(0,0),mqtt_is_valid }

ms_ltime(<format>[,<offset>])
  This works like "ltime" but takes an input in milliseconds. It also supports
  the %N conversion specifier inspired by date(1).
  Converts an integer supposed to contain a date since epoch to a string
  representing this date in local time using a format defined by the <format>
  string using strftime(3). The purpose is to allow any date format to be used
  in logs. An optional <offset> in milliseconds may be applied to the input date
  (positive or negative). See the strftime() man page for the format supported
  by your operating system.

  The %N conversion specifier allows you to output the nanoseconds part of the
  date, precision is limited since the input is milliseconds.
  (000000000..999000000).  %N can take a width argument between % and N. It is
  useful to display milliseconds (%3N) or microseconds (%6N). The default and
  maximum width is 9 (%N = %9N).

  See also the utime converter for UTC as well as "ltime" and "us_ltime"
  converters.

  Example :

      # Emit 3 colons, the local time, the timezone and another with ip:port
      # e.g. 2023/07/24/11:53:02.196 +0200 127.0.0.1:41530
      log-format %[accept_date(ms),ms_ltime("%Y/%m/%d/%H:%M:%S.%3N %z")]\ %ci:%cp

ms_utime(<format>[,<offset>])
  This works like "utime" but takes an input in milliseconds. It also supports
  the %N conversion specifier inspired by date(1).
  Converts an integer supposed to contain a date since epoch to a string
  representing this date in UTC time using a format defined by the <format>
  string using strftime(3). The purpose is to allow any date format to be used
  in logs. An optional <offset> in milliseconds may be applied to the input date
  (positive or negative). See the strftime() man page for the format supported
  by your operating system.

  The %N conversion specifier allows you to output the nanoseconds part of the
  date, precision is limited since the input is milliseconds.
  (000000000..999000000).  %N can take a width argument between % and N. It is
  useful to display milliseconds (%3N) or microseconds (%6N). The default and
  maximum width is 9 (%N = %9N).

  See also the ltime converter for local as well as "utime" and "us_utime"
  converters.

  Example :

      # Emit 3 colons, the UTC time, the timezone and another with ip:port
      # e.g. 2023/07/24/09:53:02.196 +0000 127.0.0.1:41530
      log-format %[accept_date(ms),ms_utime("%Y/%m/%d/%H:%M:%S.%3N %z")]\ %ci:%cp

mul(<value>)
  Multiplies the input value of type signed integer by <value>, and returns
  the product as an signed integer. In case of overflow, the largest possible
  value for the sign is returned so that the operation doesn't wrap around.
  <value> can be a numeric value or a variable name. See section 2.8 about
  variables for details.

nbsrv
  Takes an input value of type string, interprets it as a backend name and
  returns the number of usable servers in that backend. Can be used in places
  where we want to look up a backend from a dynamic name, like a result of a
  map lookup.

neg
  Takes the input value of type signed integer, computes the opposite value,
  and returns the remainder as an signed integer. 0 is identity. This operator
  is provided for reversed subtracts : in order to subtract the input from a
  constant, simply perform a "neg,add(value)".

not
  Returns a boolean FALSE if the input value of type signed integer is
  non-null, otherwise returns TRUE. Used in conjunction with and(), it can be
  used to report true/false for bit testing on input values (e.g. verify the
  absence of a flag).

odd
  Returns a boolean TRUE if the input value of type signed integer is odd
  otherwise returns FALSE. It is functionally equivalent to "and(1),bool".

or(<value>)
  Performs a bitwise "OR" between <value> and the input value of type signed
  integer, and returns the result as an signed integer. <value> can be a
  numeric value or a variable name. See section 2.8 about variables for details.

param(<name>[,<delim>])
  This extracts the first occurrence of the parameter <name> in the input string
  where parameters are delimited by <delim>, which defaults to "&", and the name
  and value of the parameter are separated by a "=". If there is no "=" and
  value before the end of the parameter segment, it is treated as equivalent to
  a value of an empty string.

  This can be useful for extracting parameters from a query string, or possibly
  a x-www-form-urlencoded body. In particular, `query,param(<name>)` can be used
  as an alternative to `urlp(<name>)` which only uses "&" as a delimiter,
  whereas "urlp" also uses "?" and ";".

  Note that this converter doesn't do anything special with url encoded
  characters. If you want to decode the value, you can use the url_dec converter
  on the output. If the name of the parameter in the input might contain encoded
  characters, you'll probably want do normalize the input before calling
  "param". This can be done using "http-request normalize-uri", in particular
  the percent-decode-unreserved and percent-to-uppercase options.

  Example :
      str(a=b&c=d&a=r),param(a)   # b
      str(a&b=c),param(a)         # ""
      str(a=&b&c=a),param(b)      # ""
      str(a=1;b=2;c=4),param(b,;) # 2
      query,param(redirect_uri),urldec()

port_only
  Converts a string which contains a Host header value into an integer by
  returning its port.
  The input must respect the format of the host header value
  (rfc9110#section-7.2). It will support that kind of input: hostname,
  hostname:80, 127.0.0.1, 127.0.0.1:80, [::1], [::1]:80.

  If no port were provided in the input, it will return 0.

  See also: "host_only" converter which will return the host.

protobuf(<field_number>[,<field_type>])
  This extracts the protocol buffers message field in raw mode of an input binary
  sample representation of a protocol buffer message with <field_number> as field
  number (dotted notation) if <field_type> is not present, or as an integer sample
  if this field is present (see also "ungrpc" below).
  The list of the authorized types is the following one: "int32", "int64", "uint32",
  "uint64", "sint32", "sint64", "bool", "enum" for the "varint" wire type 0
  "fixed64", "sfixed64", "double" for the 64bit wire type 1, "fixed32", "sfixed32",
  "float" for the wire type 5. Note that "string" is considered as a length-delimited
  type, so it does not require any <field_type> argument to be extracted.
  More information may be found here about the protocol buffers message field types:
  https://developers.google.com/protocol-buffers/docs/encoding

regsub(<regex>,<subst>[,<flags>])
  Applies a regex-based substitution to the input string. It does the same
  operation as the well-known "sed" utility with "s/<regex>/<subst>/". By
  default it will replace in the input string the first occurrence of the
  largest part matching the regular expression <regex> with the substitution
  string <subst>. It is possible to replace all occurrences instead by adding
  the flag "g" in the third argument <flags>. It is also possible to make the
  regex case insensitive by adding the flag "i" in <flags>. Since <flags> is a
  string, it is made up from the concatenation of all desired flags. Thus if
  both "i" and "g" are desired, using "gi" or "ig" will have the same effect.
  The first use of this converter is to replace certain characters or sequence
  of characters with other ones.

  It is highly recommended to enclose the regex part using protected quotes to
  improve clarity and never have a closing parenthesis from the regex mixed up
  with the parenthesis from the function. Just like in Bourne shell, the first
  level of quotes is processed when delimiting word groups on the line, a
  second level is usable for argument. It is recommended to use single quotes
  outside since these ones do not try to resolve backslashes nor dollar signs.

  Examples:

     # de-duplicate "/" in header "x-path".
     # input:  x-path: /////a///b/c/xzxyz/
     # output: x-path: /a/b/c/xzxyz/
     http-request set-header x-path "%[hdr(x-path),regsub('/+','/','g')]"

     # copy query string to x-query and drop all leading '?', ';' and '&'
     http-request set-header x-query "%[query,regsub([?;&]*,'')]"

     # capture groups and backreferences
     # both lines do the same.
     http-request redirect location %[url,'regsub("(foo|bar)([0-9]+)?","\2\1",i)']
     http-request redirect location %[url,regsub(\"(foo|bar)([0-9]+)?\",\"\2\1\",i)]

rfc7239_field(<field>)
  Extracts a single field/parameter from RFC 7239 compliant header value input.

  Supported fields are:
    - proto: either 'http' or 'https'
    - host: http compliant host
    - for: RFC7239 node
    - by: RFC7239 node

  More info here:
    https://www.rfc-editor.org/rfc/rfc7239.html#section-6

  Example:
    # extract host field from forwarded header and store it in req.fhost var
    http-request set-var(req.fhost) req.hdr(forwarded),rfc7239_field(host)
    #input: "proto=https;host=\"haproxy.org:80\""
    #  output: "haproxy.org:80"

    # extract for field from forwarded header and store it in req.ffor var
    http-request set-var(req.ffor) req.hdr(forwarded),rfc7239_field(for)
    #input: "proto=https;host=\"haproxy.org:80\";for=\"127.0.0.1:9999\""
    #  output: "127.0.0.1:9999"

rfc7239_is_valid
  Returns true if input header is RFC 7239 compliant header value and false
  otherwise.

  Example:
    acl valid req.hdr(forwarded),rfc7239_is_valid
    #input: "for=127.0.0.1;proto=http"
    #  output: TRUE
    #input: "proto=custom"
    #  output: FALSE

rfc7239_n2nn
  Converts RFC7239 node (provided by 'for' or 'by' 7239 header fields)
  into its corresponding nodename final form:
    - ipv4 address
    - ipv6 address
    - 'unknown'
    - '_obfs' identifier

  Example:
    # extract 'for' field from forwarded header, extract nodename from
    # resulting node identifier and store the result in req.fnn
    http-request set-var(req.fnn) req.hdr(forwarded),rfc7239_field(for),rfc7239_n2nn
    #input: "127.0.0.1:9999"
    #  output: 127.0.0.1 (ipv4)
    #input: "[ab:cd:ff:ff:ff:ff:ff:ff]:9998"
    #  output: ab:cd:ff:ff:ff:ff:ff:ff (ipv6)
    #input: "_name:_port"
    #  output: "_name" (string)

rfc7239_n2np
  Converts RFC7239 node (provided by 'for' or 'by' 7239 header fields)
  into its corresponding nodeport final form:
    - unsigned integer
    - '_obfs' identifier

  Example:
    # extract 'by' field from forwarded header, extract node port from
    # resulting node identifier and store the result in req.fnp
    http-request set-var(req.fnp) req.hdr(forwarded),rfc7239_field(by),rfc7239_n2np
    #input: "127.0.0.1:9999"
    #  output: 9999 (integer)
    #input: "[ab:cd:ff:ff:ff:ff:ff:ff]:9998"
    #  output: 9998 (integer)
    #input: "_name:_port"
    #  output: "_port" (string)

rfc7239_nn
  Converts provided address / string input into RFC7239-compliant node name.
  It may be used to manually build 'for' or 'by' 7239 header fields.

  When provided input is string, it will be automatically prefixed with '_'
  char to represent obfuscated identifier. String must comply with RFC7239
  charset. If string is empty, it will be converter to "unknown" identifier.

  Example:
    #input: ipv6(ab:cd:ff:ff:ff:ff:ff:ff)
    #  output: "[ab:cd:ff:ff:ff:ff:ff:ff]"
    #input: str(test)
    #  output: "_test"
    #input: str()
    #  output: "unknown"

  See also: "rfc7239_np"

rfc7239_np
  Converts provided unsigned integer / string input into RFC7239-compliant node
  port. It may be used to manually build 'for' or 'by' 7239 header fields.

  When provided input is string, it will be automatically prefixed with '_'
  char to represent obfuscated identifier. String must comply with RFC7239
  charset and cannot be empty.

  Example:
    #input: int(12)
    #  output: "12"
    #input: str(test)
    #  output: "_test"

    # build 'for' forwarded header field
    http-request set-var-fmt(txn.test) "for=\"%[ipv6(::1),rfc7239_nn]:%[int(8080),rfc7239_np]\";"
    #  output: "for=\"[::1]:8080\";"

    # build RFC-compliant 7239 header:
    http-request set-var-fmt(txn.forwarded) "for=\"%[ipv6(::1),rfc7239_nn]:%[str(8888),rfc7239_np]\";host=\"haproxy.org\";proto=http"
    # check RFC-compliancy:
    http-request set-var(txn.test) "var(txn.forwarded),debug(test,stderr),rfc7239_is_valid,debug(test,stderr)"
    #  stderr output:
    #    [debug] test: type=str <for="[::1]:_8888";host="haproxy.org";proto=http>
    #    [debug] test: type=bool <1>

  See also: "rfc7239_nn"

rtrim(<chars>)
  Skips any characters from <chars> from the end of the string representation
  of the input sample.

sdbm([<avalanche>])
  Hashes a binary input sample into an unsigned 32-bit quantity using the SDBM
  hash function. Optionally, it is possible to apply a full avalanche hash
  function to the output if the optional <avalanche> argument equals 1. This
  converter uses the same functions as used by the various hash-based load
  balancing algorithms, so it will provide exactly the same results. It is
  mostly intended for debugging, but can be used as a stick-table entry to
  collect rough statistics. It must not be used for security purposes as a
  32-bit hash is trivial to break. See also "crc32", "djb2", "wt6", "crc32c",
  and the "hash-type" directive.

secure_memcmp(<var>)
  Compares the contents of <var> with the input value. Both values are treated
  as a binary string. Returns a boolean indicating whether both binary strings
  match.

  If both binary strings have the same length then the comparison will be
  performed in constant time.

  Please note that this converter is only available when HAProxy has been
  compiled with USE_OPENSSL.

  Example :

     http-request set-var(txn.token) hdr(token)
     # Check whether the token sent by the client matches the secret token
     # value, without leaking the contents using a timing attack.
     acl token_given str(my_secret_token),secure_memcmp(txn.token)

set-var(<var>[,<cond>...])
  Sets a variable with the input content and returns the content on the output
  as-is if all of the specified conditions are true (see below for a list of
  possible conditions). The variable keeps the value and the associated input
  type. See section 2.8 about variables for details.

  You can pass at most four conditions to the converter among the following
  possible conditions :
   - "ifexists"/"ifnotexists":
        Checks if the variable already existed before the current set-var call.
        A variable is usually created through a successful set-var call.
        Note that variables of scope "proc" are created during configuration
        parsing so the "ifexists" condition will always be true for them.
   - "ifempty"/"ifnotempty":
        Checks if the input is empty or not.
        Scalar types are never empty so the ifempty condition will be false for
        them regardless of the input's contents (integers, booleans, IPs ...).
   - "ifset"/"ifnotset":
        Checks if the variable was previously set or not, or if unset-var was
        called on the variable.
        A variable that does not exist yet is considered as not set. A "proc"
        variable can exist while not being set since they are created during
        configuration parsing.
   - "ifgt"/"iflt":
        Checks if the content of the variable is "greater than" or "less than"
        the input. This check can only be performed if both the input and
        the variable are of type integer. Otherwise, the check is considered as
        true by default.

sha1
  Converts a binary input sample to a SHA-1 digest. The result is a binary
  sample with length of 20 bytes.

sha2([<bits>])
  Converts a binary input sample to a digest in the SHA-2 family. The result
  is a binary sample with length of <bits>/8 bytes.

  Valid values for <bits> are 224, 256, 384, 512, each corresponding to
  SHA-<bits>. The default value is 256.

  Please note that this converter is only available when HAProxy has been
  compiled with USE_OPENSSL.

srv_is_up
  Takes an input value of type string, either a server name or <backend>/<server>
  format and returns true when the designated server is currently UP. Can be used
  in places where we want to look up a server status from a dynamic name, like a
  cookie value (e.g. req.cook(SRVID),srv_is_up) and then make a decision to
  direct a request elsewhere. Before using this, please keep in mind that using
  this converter on uncontrolled data might allow an external observer to query
  the state of any server in the whole configuration, which might possibly not
  be acceptable in some environments.

srv_queue
  Takes an input value of type string, either a server name or <backend>/<server>
  format and returns the number of queued streams on that server. Can be used
  in places where we want to look up queued streams from a dynamic name, like a
  cookie value (e.g. req.cook(SRVID),srv_queue) and then make a decision to break
  persistence or direct a request elsewhere. Before using this, please keep in
  mind that using this converter on uncontrolled data might allow an external
  observer to query the state of any server in the whole configuration, which
  might possibly not be acceptable in some environments.

strcmp(<var>)
  Compares the contents of <var> with the input value of type string. Returns
  the result as a signed integer compatible with strcmp(3): 0 if both strings
  are identical. A value less than 0 if the left string is lexicographically
  smaller than the right string or if the left string is shorter. A value greater
  than 0 otherwise (right string greater than left string or the right string is
  shorter).

  See also the secure_memcmp converter if you need to compare two binary
  strings in constant time.

  Example :

     http-request set-var(txn.host) hdr(host)
     # Check whether the client is attempting domain fronting.
     acl ssl_sni_http_host_match ssl_fc_sni,strcmp(txn.host) eq 0


sub(<value>)
  Subtracts <value> from the input value of type signed integer, and returns
  the result as an signed integer. Note: in order to subtract the input from
  a constant, simply perform a "neg,add(value)". <value> can be a numeric value
  or a variable name. See section 2.8 about variables for details.

table_bytes_in_rate([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the average
  client-to-server bytes rate associated with the input sample in the designated
  table, measured in amount of bytes over the period configured in the table.
  See also the sc_bytes_in_rate sample fetch keyword.


table_bytes_out_rate([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the average
  server-to-client bytes rate associated with the input sample in the designated
  table, measured in amount of bytes over the period configured in the table.
  See also the sc_bytes_out_rate sample fetch keyword.

table_clr_gpc(<idx>[,<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. Clears the General Purpose Counter at the
  index <idx> of the gpc array and returns its previous value. <idx> is an
  integer between 0 and 99. If the entry is not found, an entry is created and
  0 is returned. This converter applies only to the 'gpc' array data_type (and
  not to the legacy 'gpc0' nor 'gpc1' data_types).
  See also the sc_clr_gpc sample fetch keyword.

table_clr_gpc0([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. Clears the first General Purpose Counter
  '0' and returns its previous value. If the entry is not found, an entry is
  created and 0 is returned. This is typically used as a second ACL in an
  expression in order to mark a connection when a first ACL was verified :

  Example:
        # block if 5 consecutive requests continue to come faster than 10 sess
        # per second, and reset the counter as soon as the traffic slows down.
        acl abuse src_http_req_rate gt 10
        acl kill  src,table_inc_gpc0 gt 5
        acl save  src,table_clr_gpc0 ge 0
        tcp-request connection accept if !abuse save
        tcp-request connection reject if abuse kill

  See also the sc_clr_gpc0 sample fetch keyword.

table_clr_gpc1([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. Clears the first General Purpose Counter
  '1' and returns its previous value. If the entry is not found, an entry is
  created and 0 is returned. This is typically used as a second ACL in an
  expression in order to mark a connection when a first ACL was verified.
  See also the sc_clr_gpc1 sample fetch keyword.

table_conn_cnt([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the cumulative
  number of incoming connections associated with the input sample in the
  designated table. See also the sc_conn_cnt sample fetch keyword.

table_conn_cur([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the current
  amount of concurrent tracked connections associated with the input sample in
  the designated table. See also the sc_conn_cur sample fetch keyword.

table_conn_rate([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the average
  incoming connection rate associated with the input sample in the designated
  table. See also the sc_conn_rate sample fetch keyword.

table_expire([<table>[,<default_value>]])
  Uses the input sample to perform a look up in in the current proxy's
  stick-table or in the designated stick-table. If the key is not found in the
  table, the converter fails except if <default_value> is set: this makes the
  converter succeed and return <default_value>. If the key is found the
  converter returns the key expiration delay associated with the input sample
  in the designated table. See also the table_idle sample fetch keyword.

table_glitch_cnt([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the cumulative
  number of front connection glitches associated with the input sample in the
  designated table. See also the sc_glitch_cnt sample fetch keyword and
  fc_glitches for the value measured on the current front connection.

table_glitch_rate([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the average
  front connection glitch rate associated with the input sample in the
  designated table. See also the sc_glitch_rate sample fetch keyword.

table_gpc(<idx>[,<table>])
  Uses the input sample to perform a lookup in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the current
  value of the General Purpose Counter at the index <idx> of the array
  associated to the input sample in the designated <table>. <idx> is an integer
  between 0 and 99. If there is no GPC stored at this index, it also returns
  the integer value 0. This applies only to the 'gpc' array data_type (and not
  to the legacy 'gpc0' nor 'gpc1' data_types). See also the sc_get_gpc sample
  fetch keyword.

table_gpc0([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the current
  value of the first general purpose counter associated with the input sample
  in the designated table. See also the sc_get_gpc0 sample fetch keyword.

table_gpc0_rate([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the frequency
  which the gpc0 counter was incremented over the configured period in the
  table, associated with the input sample in the designated table. See also the
  sc_get_gpc0_rate sample fetch keyword.

table_gpc1([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the current
  value of the second general purpose counter associated with the input sample
  in the designated table. See also the sc_get_gpc1 sample fetch keyword.

table_gpc1_rate([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the frequency
  which the gpc1 counter was incremented over the configured period in the
  table, associated with the input sample in the designated table. See also the
  sc_get_gpc1_rate sample fetch keyword.

table_gpc_rate(<idx>[,<table>])
  Uses the input sample to perform a lookup in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the frequency
  which the Global Purpose Counter at index <idx> of the array (associated to
  the input sample in the designated stick-table <table>) was incremented over
  the configured period. <idx> is an integer between 0 and 99. If there is no
  gpc_rate stored at this index, it also returns the integer value 0. This
  applies only to the 'gpc_rate' array data_type (and not to the legacy
  'gpc0_rate' nor 'gpc1_rate' data_types). See also the sc_gpc_rate sample
  fetch keyword.

table_gpt(<idx>[,<table>])
  Uses the input sample to perform a lookup in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the current
  value of the general purpose tag at the index <idx> of the array associated
  to the input sample in the designated <table>. <idx> is an integer between
  0 and 99. If there is no GPT stored at this index, it also returns the
  integer value 0. This applies only to the 'gpt' array data_type (and not on
  the legacy 'gpt0' data-type). See also the sc_get_gpt sample fetch keyword.

table_gpt0([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the current
  value of the first general purpose tag associated with the input sample in
  the designated table. See also the sc_get_gpt0 sample fetch keyword.

table_http_err_cnt([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the cumulative
  number of HTTP errors associated with the input sample in the designated
  table. See also the sc_http_err_cnt sample fetch keyword.

table_http_err_rate([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the average rate of HTTP errors
  associated with the input sample in the designated table, measured in amount
  of errors over the period configured in the table. See also the
  sc_http_err_rate sample fetch keyword.

table_http_fail_cnt([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the cumulative
  number of HTTP failures associated with the input sample in the designated
  table. See also the sc_http_fail_cnt sample fetch keyword.

table_http_fail_rate([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the average rate of HTTP failures
  associated with the input sample in the designated table, measured in amount
  of failures over the period configured in the table. See also the
  sc_http_fail_rate sample fetch keyword.

table_http_req_cnt([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the cumulative
  number of HTTP requests associated with the input sample in the designated
  table. See also the sc_http_req_cnt sample fetch keyword.

table_http_req_rate([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the average rate of HTTP requests
  associated with the input sample in the designated table, measured in amount
  of requests over the period configured in the table. See also the
  sc_http_req_rate sample fetch keyword.

table_idle([<table>[,<default_value>]])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table, the
  converter fails except if <default_value> is set: this makes the converter
  succeed and return <default_value>. If the key is found the converter returns
  the time the key entry associated with the input sample in the designated
  table remained idle since the last time it was updated. See also the
  table_expire sample fetch keyword.

table_inc_gpc(<idx>[,<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. Increments the General Purpose Counter at
  index <idx> of the array and returns its new value. <idx> is an integer
  between 0 and 99. If the entry is not found, an entry is created and 1 is
  returned. This converter applies only to the 'gpc' array data_type (and not to
  the legacy 'gpc0' nor 'gpc1' data_types). See also sc_inc_gpc.

table_inc_gpc0([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. Increments the General Purpose Counter '0'
  and returns its new value. If the entry is not found, an entry is created and
  1 is returned. See also sc0/sc2/sc2_inc_gpc0. This is typically used as a
  second ACL in an expression in order to mark a connection when a first ACL
  was verified :

  Example:
        acl abuse src,table_req_rate gt 10
        acl kill  src,table_inc_gpc0 gt 0
        tcp-request connection reject if abuse kill

table_inc_gpc1([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. Increments the General Purpose Counter '1'
  and returns its new value. If the entry is not found, an entry is created and
  1 is returned. See also sc0/sc2/sc2_inc_gpc1. This is typically used as a
  second ACL in an expression in order to mark a connection when a first ACL
  was verified.

table_kbytes_in([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the cumulative
  number of client-to-server data associated with the input sample in the
  designated table, measured in kilobytes. The test is currently performed on
  32-bit integers, which limits values to 4 terabytes. See also the sc_kbytes_in
  sample fetch keyword.

table_kbytes_out([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the cumulative
  number of server-to-client data associated with the input sample in the
  designated table, measured in kilobytes. The test is currently performed on
  32-bit integers, which limits values to 4 terabytes. See also the
  sc_kbytes_out sample fetch keyword.

table_server_id([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the server ID
  associated with the input sample in the designated table. A server ID is
  associated to a sample by a "stick" rule when a connection to a server
  succeeds. A server ID zero means that no server is associated with this key.

table_sess_cnt([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the cumulative
  number of incoming sessions associated with the input sample in the designated
  table. Note that a session here refers to an incoming connection being
  accepted by the "tcp-request connection" rulesets. See also the sc_sess_cnt
  sample fetch keyword.

table_sess_rate([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the average
  incoming session rate associated with the input sample in the designated
  table. Note that a session here refers to an incoming connection being
  accepted by the "tcp-request connection" rulesets. See also the sc_sess_rate
  sample fetch keyword.

table_trackers([<table>])
  Uses the input sample to perform a look up in the current proxy's stick-table
  or in the designated stick-table. If the key is not found in the table,
  integer value zero is returned. Otherwise the converter returns the current
  amount of concurrent connections tracking the same key as the input sample
  in the designated table. It differs from table_conn_cur in that it does not
  rely on any stored information but on the table's reference count (the "use"
  value which is returned by "show table" on the CLI). This may sometimes be
  more suited for layer7 tracking. It can be used to tell a server how many
  concurrent connections there are from a given address for example. See also
  the sc_trackers sample fetch keyword.

ub64dec
  This converter is the base64url variant of b64dec converter. base64url
  encoding is the "URL and Filename Safe Alphabet" variant of base64 encoding.
  It is also the encoding used in JWT (JSON Web Token) standard.

  Example:
    # Decoding a JWT payload:
    http-request set-var(txn.token_payload) req.hdr(Authorization),word(2,.),ub64dec

ub64enc
  This converter is the base64url variant of base64 converter.

ungrpc(<field_number>[,<field_type>])
  This extracts the protocol buffers message field in raw mode of an input binary
  sample representation of a gRPC message with <field_number> as field number
  (dotted notation) if <field_type> is not present, or as an integer sample if this
  field is present.
  The list of the authorized types is the following one: "int32", "int64", "uint32",
  "uint64", "sint32", "sint64", "bool", "enum" for the "varint" wire type 0
  "fixed64", "sfixed64", "double" for the 64bit wire type 1, "fixed32", "sfixed32",
  "float" for the wire type 5. Note that "string" is considered as a length-delimited
  type, so it does not require any <field_type> argument to be extracted.
  More information may be found here about the protocol buffers message field types:
  https://developers.google.com/protocol-buffers/docs/encoding

  Example:
    // with such a protocol buffer .proto file content adapted from
    // https://github.com/grpc/grpc/blob/master/examples/protos/route_guide.proto

    message Point {
      int32 latitude = 1;
      int32 longitude = 2;
    }

    message PPoint {
      Point point = 59;
    }

    message Rectangle {
      // One corner of the rectangle.
      PPoint lo = 48;
      // The other corner of the rectangle.
      PPoint hi = 49;
    }

  let's say a body request is made of a "Rectangle" object value (two PPoint
  protocol buffers messages), the four protocol buffers fields could be
  extracted with these "ungrpc" directives:

    req.body,ungrpc(48.59.1,int32) # "latitude" of "lo" first PPoint
    req.body,ungrpc(48.59.2,int32) # "longitude" of "lo" first PPoint
    req.body,ungrpc(49.59.1,int32) # "latitude" of "hi" second PPoint
    req.body,ungrpc(49.59.2,int32) # "longitude" of "hi" second PPoint

  We could also extract the intermediary 48.59 field as a binary sample as follows:

    req.body,ungrpc(48.59)

  As a gRPC message is always made of a gRPC header followed by protocol buffers
  messages, in the previous example the "latitude" of "lo" first PPoint
  could be extracted with these equivalent directives:

    req.body,ungrpc(48.59),protobuf(1,int32)
    req.body,ungrpc(48),protobuf(59.1,int32)
    req.body,ungrpc(48),protobuf(59),protobuf(1,int32)

  Note that the first convert must be "ungrpc", the remaining ones must be
  "protobuf" and only the last one may have or not a second argument to
  interpret the previous binary sample.


unset-var(<var>)
  Unsets a variable if the input content is defined. The name of the variable
  starts with an indication about its scope. See section 2.8 about variables
  for details.

upper
  Convert a string sample to upper case. This can only be placed after a string
  sample fetch function or after a transformation keyword returning a string
  type. The result is of type string.

url_dec([<in_form>])
  Takes an url-encoded string provided as input and returns the decoded version
  as output. The input and the output are of type string. If the <in_form>
  argument is set to a non-zero integer value, the input string is assumed to
  be part of a form or query string and the '+' character will be turned into a
  space (' '). Otherwise this will only happen after a question mark indicating
  a query string ('?').

url_enc([<enc_type>])
  Takes a string provided as input and returns the encoded version as output.
  The input and the output are of type string. By default the type of encoding
  is meant for `query` type. There is no other type supported for now but the
  optional argument is here for future changes.

us_ltime(<format>[,<offset>])
  This works like "ltime" but takes an input in microseconds. It also supports
  the %N conversion specifier inspired by date(1).
  Converts an integer supposed to contain a date since epoch to a string
  representing this date in local time using a format defined by the <format>
  string using strftime(3). The purpose is to allow any date format to be used
  in logs. An optional <offset> in microseconds may be applied to the input
  date (positive or negative). See the strftime() man page for the format
  supported by your operating system.

  The %N conversion specifier allows you to output the nanoseconds part of the
  date, precision is limited since the input is microseconds.
  (000000000..999999000). %N can take a width argument between % and N. It is
  useful to display milliseconds (%3N) or microseconds (%6N). The default and
  maximum width is 9 (%N = %9N).

  See also the "utime" converter for UTC as well as "ltime" and "ms_ltime"
  converters.

  Example :

      # Emit 3 colons, the local time, the timezone and another with ip:port
      # e.g. 2023/07/24/09:53:02.196234 +0000 127.0.0.1:41530
      log-format %[accept_date(us),us_ltime("%Y/%m/%d/%H:%M:%S.%6N %z")]\ %ci:%cp

us_utime(<format>[,<offset>])
  This works like "utime" but takes an input in microseconds. It also supports
  the %N conversion specifier inspired by date(1).
  Converts an integer supposed to contain a date since epoch to a string
  representing this date in UTC time using a format defined by the <format>
  string using strftime(3). The purpose is to allow any date format to be used
  in logs. An optional <offset> in microseconds may be applied to the input
  date (positive or negative). See the strftime() man page for the format
  supported by your operating system.

  The %N conversion specifier allows you to output the nanoseconds part of the
  date, precision is limited since the input is microseconds.
  (000000000..999999000). %N can take a width argument between % and N. It is
  useful to display milliseconds (%3N) or microseconds (%6N). The default and
  maximum width is 9 (%N = %9N).

  See also the "ltime" converter for local as well as "utime" and "ms_utime"
  converters.

  Example :

      # Emit 3 colons, the UTC time, the timezone and another with ip:port
      # e.g. 2023/07/24/09:53:02.196234 +0000 127.0.0.1:41530
      log-format %[accept_date(us),us_utime("%Y/%m/%d/%H:%M:%S.%6N %z")]\ %ci:%cp

utime(<format>[,<offset>])
  Converts an integer supposed to contain a date since epoch to a string
  representing this date in UTC time using a format defined by the <format>
  string using strftime(3). The purpose is to allow any date format to be used
  in logs. An optional <offset> in seconds may be applied to the input date
  (positive or negative). See the strftime() man page for the format supported
  by your operating system. See also the "ltime" converter as well as "ms_utime"
  and "us_utime".

  Example :

      # Emit two colons, one with the UTC time and another with ip:port
      # e.g.  20140710162350 127.0.0.1:57325
      log-format %[date,utime(%Y%m%d%H%M%S)]\ %ci:%cp

when(<condition>[,<args>...])
  Evaluates the condition and when true, passes the input sample as-is to the
  output, otherwise return nothing. This is designed specifically to produce
  some rarely needed data that should only be emitted under certain conditions,
  such as debugging information when an error is met.

  The condition is made of a keyword among the list below, optionally preceded
  by an exclamation mark ('!') to negate it, and optionally suffixed by some
  arguments specific to that condition:

    - "error" returns true when an error was encountered during the processing
      of the request or stream. It uses the same rules as "dontlog-normal"
      (e.g. a successful redispatch counts as an error).

    - "forwarded" returns true when the request was forwarded to a backend
      server

    - "normal" returns true when no error happened (this is equivalent to
      "!error").

    - "processed" returns true when the request was either forwarded to a
      backend server, or processed by an applet.

    - "stopping" returns true if the process is currently stopping when the
      rule is evaluated

    - "toapplet" returns true when the request was processed by an applet.

    - "acl" returns true when the ACL designated by the next argument evaluates
      to true. Note that the ACL is evaluated inline by the converter, so that
      what it refers to must be valid in that context. A particular use case
      consists in evaluating if the total transfer time is too long or not
      before deciding to log detauls from abnormally long transfers.

  Note that the content is evaluated in any case, so doing this does not avoid
  the generation of that information. It's only meant to avoid producing that
  information.

  An example would be to add backend stream debugging information in the logs
  only when an error was encountered during processing, or logging extra
  information when stopping, etc.

  Example:
    # log "dbg={-}" when fine, or "dbg={... debug info ...}" on error:
    log-format "$HAPROXY_HTTP_LOG_FMT dbg={%[bs.debug_str,when(!normal)]}"

    Here, the "dbg" field in the log will only contain an dash ('-') to
    indicate a missing content when the rule is not validated, and will emit a
    whole debugging block when it is.

  Example
    # log "dbg={-}" when fine, or "dbg={... debug info ...}" on slow transfers
    acl slow_xfer res.timer.data ge 10000   # more than 10s is slow
    log-format "$HAPROXY_HTTP_LOG_FMT                                         \
                fsdbg={%[fs.debug_str,when(acl,slow_xfer)]}                   \
                bsdbg={%[bs.debug_str,when(acl,slow_xfer)]}"

  Example
    # only emit the backend src/port when a real connection was issued:
    log-format "$HAPROXY_HTTP_LOG_FMT \
               src=[%[bc_src,when(forwarded)]:%[bc_src_port,when(forwarded)]]"

  Since it kills the evaluation of the expression when it is not true, it is
  also possible to use it to stop a subsequent converter from being called.
  This may for example be used to call the debug() converter only upon error,
  to log an element only when absolutely necessary.

  Example:
    # emit the whole response headers list to stderr only on error and only
    # when the output is a connection. We abuse a dummy variable here.
    http-after-response set-var(res.test) \
                  res.hdrs,when(error),when(forwarded),debug(hdrs,stderr)

  See also: debug converter

word(<index>,<delimiters>[,<count>])
  Extracts the nth word counting from the beginning (positive index) or from
  the end (negative index) considering given delimiters from an input string.
  Indexes start at 1 or -1 and delimiters are a string formatted list of chars.
  Empty words are skipped. This means that delimiters at the start or end of
  the input string are ignored and consecutive delimiters within the input
  string are considered to be a single delimiter.
  Optionally you can specify <count> of words to extract (default: 1).
  Value of 0 indicates extraction of all remaining words.

  Example :
      str(f1_f2_f3__f5),word(4,_)    # f5
      str(f1_f2_f3__f5),word(5,_)    # <not found>
      str(f1_f2_f3__f5),word(2,_,0)  # f2_f3__f5
      str(f1_f2_f3__f5),word(3,_,2)  # f3__f5
      str(f1_f2_f3__f5),word(-2,_,3) # f1_f2_f3
      str(f1_f2_f3__f5),word(-3,_,0) # f1_f2
      str(/f1/f2/f3/f4),word(1,/)    # f1
      str(/f1////f2/f3/f4),word(1,/) # f2

wt6([<avalanche>])
  Hashes a binary input sample into an unsigned 32-bit quantity using the WT6
  hash function. Optionally, it is possible to apply a full avalanche hash
  function to the output if the optional <avalanche> argument equals 1. This
  converter uses the same functions as used by the various hash-based load
  balancing algorithms, so it will provide exactly the same results. It is
  mostly intended for debugging, but can be used as a stick-table entry to
  collect rough statistics. It must not be used for security purposes as a
  32-bit hash is trivial to break. See also "crc32", "djb2", "sdbm", "crc32c",
  and the "hash-type" directive.


x509_v_err_str
  Convert a numerical value to its corresponding X509_V_ERR constant name. It
  is useful in ACL in order to have a configuration which works with multiple
  version of OpenSSL since some codes might change when changing version.

  When the corresponding constant name was not found, outputs the numerical
  value as a string.

  The list of constant provided by OpenSSL can be found at
  https://www.openssl.org/docs/manmaster/man3/X509_STORE_CTX_get_error.html#ERROR-CODES
  Be careful to read the page for the right version of OpenSSL.

  Example:

    bind :443 ssl crt common.pem ca-file ca-auth.crt verify optional crt-ignore-err X509_V_ERR_CERT_REVOKED,X509_V_ERR_CERT_HAS_EXPIRED

    acl cert_expired ssl_c_verify,x509_v_err_str -m str X509_V_ERR_CERT_HAS_EXPIRED
    acl cert_revoked ssl_c_verify,x509_v_err_str -m str X509_V_ERR_CERT_REVOKED
    acl cert_ok      ssl_c_verify,x509_v_err_str -m str X509_V_OK

    http-response add-header X-SSL Ok if cert_ok
    http-response add-header X-SSL Expired if cert_expired
    http-response add-header X-SSL Revoked if cert_revoked

    http-response add-header X-SSL-verify %[ssl_c_verify,x509_v_err_str]

xor(<value>)
  Performs a bitwise "XOR" (exclusive OR) between <value> and the input value
  of type signed integer, and returns the result as an signed integer.
  <value> can be a numeric value or a variable name. See section 2.8 about
  variables for details.

xxh3([<seed>])
  Hashes a binary input sample into a signed 64-bit quantity using the XXH3
  64-bit variant of the XXhash hash function. This hash supports a seed which
  defaults to zero but a different value maybe passed as the <seed> argument.
  This hash is known to be very good and very fast so it can be used to hash
  URLs and/or URL parameters for use as stick-table keys to collect statistics
  with a low collision rate, though care must be taken as the algorithm is not
  considered as cryptographically secure.

xxh32([<seed>])
  Hashes a binary input sample into an unsigned 32-bit quantity using the 32-bit
  variant of the XXHash hash function. This hash supports a seed which defaults
  to zero but a different value maybe passed as the <seed> argument. This hash
  is known to be very good and very fast so it can be used to hash URLs and/or
  URL parameters for use as stick-table keys to collect statistics with a low
  collision rate, though care must be taken as the algorithm is not considered
  as cryptographically secure.

xxh64([<seed>])
  Hashes a binary input sample into a signed 64-bit quantity using the 64-bit
  variant of the XXHash hash function. This hash supports a seed which defaults
  to zero but a different value maybe passed as the <seed> argument. This hash
  is known to be very good and very fast so it can be used to hash URLs and/or
  URL parameters for use as stick-table keys to collect statistics with a low
  collision rate, though care must be taken as the algorithm is not considered
  as cryptographically secure.


7.3.2. Fetching samples from internal states
--------------------------------------------

A first set of sample fetch methods applies to internal information which does
not even relate to any client information. These ones are sometimes used with
"monitor fail" directives to report an internal status to external watchers.
The sample fetch methods described in this section are usable anywhere.

Summary of sample fetch methods in this section and their respective types:

  keyword                                          output type
-------------------------------------------------+-------------
acl([!]<name>[,...])                               boolean
act_conn                                           integer
always_false                                       boolean
always_true                                        boolean
avg_queue([<backend>])                             integer
be_conn([<backend>])                               integer
be_conn_free([<backend>])                          integer
be_sess_rate([<backend>])                          integer
bin(<hex>)                                         bin
bool(<bool>)                                       bool
connslots([<backend>])                             integer
cpu_calls                                          integer
cpu_ns_avg                                         integer
cpu_ns_tot                                         integer
date([<offset>[,<unit>]])                          integer
date_us                                            integer
env(<name>)                                        string
fe_conn([<frontend>])                              integer
fe_req_rate([<frontend>])                          integer
fe_sess_rate([<frontend>])                         integer
hostname                                           string
int(<integer>)                                     signed
ipv4(<ipv4>)                                       ipv4
ipv6(<ipv6>)                                       ipv6
last_entity                                        string
last_rule_file                                     string
last_rule_line                                     integer
lat_ns_avg                                         integer
lat_ns_tot                                         integer
meth(<method>)                                     method
nbsrv([<backend>])                                 integer
pid                                                integer
prio_class                                         integer
prio_offset                                        integer
proc                                               integer
queue([<backend>])                                 integer
quic_enabled                                       boolean
rand([<range>])                                    integer
srv_conn([<backend>/]<server>)                     integer
srv_conn_free([<backend>/]<server>)                integer
srv_is_up([<backend>/]<server>)                    boolean
srv_iweight([<backend>/]<server>)                  integer
srv_queue([<backend>/]<server>)                    integer
srv_sess_rate([<backend>/]<server>)                integer
srv_uweight([<backend>/]<server>)                  integer
srv_weight([<backend>/]<server>)                   integer
stopping                                           boolean
str(<string>)                                      string
table_avl([<table>])                               integer
table_cnt([<table>])                               integer
term_events                                        string
thread                                             integer
txn.id32                                           integer
txn.sess_term_state                                string
uptime                                             integer
uuid([<version>])                                  string
var(<var-name>[,<default>])                        undefined
wait_end                                           boolean
waiting_entity                                     string
-------------------------------------------------+-------------

Detailed list:

acl([!]<name>[,...]) : boolean
  Returns true if the evaluation of all the named ACL(s) is true, otherwise
  returns false. Up to 12 ACLs may be provided, each delimited by comma. Each
  named ACL may be prefixed with a "!" to invert the result. If any evaluation
  produces an error then the sample also returns an error.
  Note that HAProxy does not perform any validation checks on the referenced
  ACLs, such as whether an ACL which uses a http request sample is used in
  response context. This behavior may be changed in the future.

act_conn : integer
  Returns the total number of active concurrent connections on the process.

always_false : boolean
  Always returns the boolean "false" value. It may be used with ACLs as a
  temporary replacement for another one when adjusting configurations.

always_true : boolean
  Always returns the boolean "true" value. It may be used with ACLs as a
  temporary replacement for another one when adjusting configurations.

avg_queue([<backend>]) : integer
  Returns the total number of queued connections of the designated backend
  divided by the number of active servers. The current backend is used if no
  backend is specified. This is very similar to "queue" except that the size of
  the farm is considered, in order to give a more accurate measurement of the
  time it may take for a new connection to be processed. The main usage is with
  ACL to return a sorry page to new users when it becomes certain they will get
  a degraded service, or to pass to the backend servers in a header so that
  they decide to work in degraded mode or to disable some functions to speed up
  the processing a bit. Note that in the event there would not be any active
  server anymore, twice the number of queued connections would be considered as
  the measured value. This is a fair estimate, as we expect one server to get
  back soon anyway, but we still prefer to send new traffic to another backend
  if in better shape. See also the "queue", "be_conn", and "be_sess_rate"
  sample fetches.

be_conn([<backend>]) : integer
  Applies to the number of currently established connections on the backend,
  possibly including the connection being evaluated. If no backend name is
  specified, the current one is used. But it is also possible to check another
  backend. It can be used to use a specific farm when the nominal one is full.
  See also the "fe_conn", "queue", "be_conn_free", and "be_sess_rate" criteria.

be_conn_free([<backend>]) : integer
  Returns an integer value corresponding to the number of available connections
  across available servers in the backend. Queue slots are not included. Backup
  servers are also not included, unless all other servers are down. If no
  backend name is specified, the current one is used. But it is also possible
  to check another backend. It can be used to use a specific farm when the
  nominal one is full. See also the "be_conn", "connslots", and "srv_conn_free"
  criteria.

  OTHER CAVEATS AND NOTES: if any of the server maxconn, or maxqueue is 0
  (meaning unlimited), then this fetch clearly does not make sense, in which
  case the value returned will be -1.

be_sess_rate([<backend>]) : integer
  Returns an integer value corresponding to the sessions creation rate on the
  backend, in number of new sessions per second. This is used with ACLs to
  switch to an alternate backend when an expensive or fragile one reaches too
  high a session rate, or to limit abuse of service (e.g. prevent sucking of an
  online dictionary). It can also be useful to add this element to logs using a
  log-format directive.

  Example :
        # Redirect to an error page if the dictionary is requested too often
        backend dynamic
            mode http
            acl being_scanned be_sess_rate gt 100
            redirect location /denied.html if being_scanned

bin(<hex>) : bin
  Returns a binary chain. The input is the hexadecimal representation
  of the string.

bool(<bool>) : bool
  Returns a boolean value. <bool> can be 'true', 'false', '1' or '0'.
  'false' and '0' are the same. 'true' and '1' are the same.

connslots([<backend>]) : integer
  Returns an integer value corresponding to the number of connection slots
  still available in the backend, by totaling the maximum amount of
  connections on all servers and the maximum queue size. This is probably only
  used with ACLs.

  The basic idea here is to be able to measure the number of connection "slots"
  still available (connection + queue), so that anything beyond that (intended
  usage; see "use_backend" keyword) can be redirected to a different backend.

  'connslots' = number of available server connection slots, + number of
  available server queue slots.

  Note that while "fe_conn" may be used, "connslots" comes in especially
  useful when you have a case of traffic going to one single ip, splitting into
  multiple backends (perhaps using ACLs to do name-based load balancing) and
  you want to be able to differentiate between different backends, and their
  available "connslots". Also, whereas "nbsrv" only measures servers that are
  actually *down*, this fetch is more fine-grained and looks into the number of
  available connection slots as well. See also "queue" and "avg_queue".

  OTHER CAVEATS AND NOTES: at this point in time, the code does not take care
  of dynamic connections. Also, if any of the server maxconn, or maxqueue is 0,
  then this fetch clearly does not make sense, in which case the value returned
  will be -1.

cpu_calls : integer
  Returns the number of calls to the task processing the stream or current
  request since it was allocated. This number is reset for each new request on
  the same connections in case of HTTP keep-alive. This value should usually be
  low and stable (around 2 calls for a typically simple request) but may become
  high if some processing (compression, caching or analysis) is performed. This
  is purely for performance monitoring purposes.

cpu_ns_avg : integer
  Returns the average number of nanoseconds spent in each call to the task
  processing the stream or current request. This number is reset for each new
  request on the same connections in case of HTTP keep-alive. This value
  indicates the overall cost of processing the request or the connection for
  each call. There is no good nor bad value but the time spent in a call
  automatically causes latency for other processing (see lat_ns_avg below),
  and may affect other connection's apparent response time. Certain operations
  like compression, complex regex matching or heavy Lua operations may directly
  affect this value, and having it in the logs will make it easier to spot the
  faulty processing that needs to be fixed to recover decent performance.
  Note: this value is exactly cpu_ns_tot divided by cpu_calls.

cpu_ns_tot : integer
  Returns the total number of nanoseconds spent in each call to the task
  processing the stream or current request. This number is reset for each new
  request on the same connections in case of HTTP keep-alive. This value
  indicates the overall cost of processing the request or the connection for
  each call. There is no good nor bad value but the time spent in a call
  automatically causes latency for other processing (see lat_ns_avg below),
  induces CPU costs on the machine, and may affect other connection's apparent
  response time. Certain operations like compression, complex regex matching or
  heavy Lua operations may directly affect this value, and having it in the
  logs will make it easier to spot the faulty processing that needs to be fixed
  to recover decent performance. The value may be artificially high due to a
  high cpu_calls count, for example when processing many HTTP chunks, and for
  this reason it is often preferred to log cpu_ns_avg instead.

date([<offset>[,<unit>]]) : integer
  Returns the current date as the epoch (number of seconds since 01/01/1970).

  If an offset value is specified, then it is added to the current date before
  returning the value. This is particularly useful to compute relative dates,
  as both positive and negative offsets are allowed.
  It is useful combined with the http_date converter.

  <unit> is facultative, and can be set to "s" for seconds (default behavior),
  "ms" for  milliseconds or "us" for microseconds.
  If unit is set, return value is an integer reflecting either seconds,
  milliseconds or microseconds since epoch, plus offset.
  It is useful when a time resolution of less than a second is needed.

  Example :

     # set an expires header to now+1 hour in every response
     http-response set-header Expires %[date(3600),http_date]

     # set an expires header to now+1 hour in every response, with
     # millisecond granularity
     http-response set-header Expires %[date(3600000,ms),http_date(0,ms)]

date_us : integer
  Return the microseconds part of the date (the "second" part is returned by
  date sample). This sample is coherent with the date sample as it is comes
  from the same timeval structure.

env(<name>) : string
  Returns a string containing the value of environment variable <name>. As a
  reminder, environment variables are per-process and are sampled when the
  process starts. This can be useful to pass some information to a next hop
  server, or with ACLs to take specific action when the process is started a
  certain way.

  Examples :
      # Pass the Via header to next hop with the local hostname in it
      http-request add-header Via 1.1\ %[env(HOSTNAME)]

      # reject cookie-less requests when the STOP environment variable is set
      http-request deny if !{ req.cook(SESSIONID) -m found } { env(STOP) -m found }

fe_conn([<frontend>]) : integer
  Returns the number of currently established connections on the frontend,
  possibly including the connection being evaluated. If no frontend name is
  specified, the current one is used. But it is also possible to check another
  frontend. It can be used to return a sorry page before hard-blocking, or to
  use a specific backend to drain new requests when the farm is considered
  full. This is mostly used with ACLs but can also be used to pass some
  statistics to servers in HTTP headers. See also the "dst_conn", "be_conn",
  "fe_sess_rate" fetches.

fe_req_rate([<frontend>]) : integer
  Returns an integer value corresponding to the number of HTTP requests per
  second sent to a frontend. This number can differ from "fe_sess_rate" in
  situations where client-side keep-alive is enabled.

fe_sess_rate([<frontend>]) : integer
  Returns an integer value corresponding to the sessions creation rate on the
  frontend, in number of new sessions per second. This is used with ACLs to
  limit the incoming session rate to an acceptable range in order to prevent
  abuse of service at the earliest moment, for example when combined with other
  layer 4 ACLs in order to force the clients to wait a bit for the rate to go
  down below the limit. It can also be useful to add this element to logs using
  a log-format directive. See also the "rate-limit sessions" directive for use
  in frontends.

  Example :
        # This frontend limits incoming mails to 10/s with a max of 100
        # concurrent connections. We accept any connection below 10/s, and
        # force excess clients to wait for 100 ms. Since clients are limited to
        # 100 max, there cannot be more than 10 incoming mails per second.
        frontend mail
            bind :25
            mode tcp
            maxconn 100
            acl too_fast fe_sess_rate ge 10
            tcp-request inspect-delay 100ms
            tcp-request content accept if ! too_fast
            tcp-request content accept if WAIT_END

hostname : string
  Returns the system hostname.

int(<integer>) : signed integer
  Returns a signed integer.

ipv4(<ipv4>) : ipv4
  Returns an ipv4.

ipv6(<ipv6>) : ipv6
  Returns an ipv6.

last_entity : string
  This returns the identity of the last entity that was evaluated during stream
  analysis. It may be the final rule that matched or the filter that
  interrupted the processing.

  A final rule is one that terminates the evaluation of the rule set (like an
  "accept", "deny" or "redirect"). This works for TCP request and response
  rules acting on the "content" rulesets, and on HTTP rules from
  "http-request", "http-response" and "http-after-response" rule sets. The
  legacy "redirect" rulesets are not supported (such information is not stored
  there), and neither "tcp-request connection" nor "tcp-request session"
  rulesets are supported because the information is stored at the stream level
  and streams do not exist during these rules. In that case, the returned value
  is equivalent to "last_rule_file:last_rule_line".
  See also "last_rule_file", "last_rule_line".

  For a filter, its identifier is returned as defined by the developers. If
  this identifier is not defined, an hexadecimal value is returned
  corresponding to an unique internal identifier.

  The main purpose of this function is to be able to report in logs the last
  entity that interrupted a processing, in order to help debugging issues. The
  information returned on entities may changed in time and must not be used for
  something else than debugging.

  Example:
      # Log the last entity, if any, and only if an error is reported
      log-format "$HAPROXY_HTTP_LOG_FMT %{Q}[last_entity,when(error)]

last_rule_file : string
  This returns the name of the configuration file containing the last final
  rule that was matched during stream analysis. A final rule is one that
  terminates the evaluation of the rule set (like an "accept", "deny" or
  "redirect"). This works for TCP request and response rules acting on the
  "content" rulesets, and on HTTP rules from "http-request", "http-response"
  and "http-after-response" rule sets. The legacy "redirect" rulesets are not
  supported (such information is not stored there), and neither "tcp-request
  connection" nor "tcp-request session" rulesets are supported because the
  information is stored at the stream level and streams do not exist during
  these rules. The main purpose of this function is to be able to report in
  logs where was the rule that gave the final verdict, in order to help
  figure why a request was denied for example. See also "last_rule_line".

last_rule_line : integer
  This returns the line number in the configuration file where is located the
  last final rule that was matched during stream analysis. A final rule is one
  that terminates the evaluation of the rule set (like an "accept", "deny" or
  "redirect"). This works for TCP request and response rules acting on the
  "content" rulesets, and on HTTP rules from "http-request", "http-response"
  and "http-after-response" rule sets. The legacy "redirect" rulesets are not
  supported (such information is not stored there), and neither "tcp-request
  connection" nor "tcp-request session" rulesets are supported because the
  information is stored at the stream level and streams do not exist during
  these rules. The main purpose of this function is to be able to report in
  logs where was the rule that gave the final verdict, in order to help
  figure why a request was denied for example. See also "last_rule_file".

lat_ns_avg : integer
  Returns the average number of nanoseconds spent between the moment the task
  handling the stream is woken up and the moment it is effectively called. This
  number is reset for each new request on the same connections in case of HTTP
  keep-alive. This value indicates the overall latency inflicted to the current
  request by all other requests being processed in parallel, and is a direct
  indicator of perceived performance due to noisy neighbours. In order to keep
  the value low, it is possible to reduce the scheduler's run queue depth using
  "tune.runqueue-depth", to reduce the number of concurrent events processed at
  once using "tune.maxpollevents", to decrease the stream's nice value using
  the "nice" option on the "bind" lines or in the frontend, to enable low
  latency scheduling using "tune.sched.low-latency", or to look for other heavy
  requests in logs (those exhibiting large values of "cpu_ns_avg"), whose
  processing needs to be adjusted or fixed. Compression of large buffers could
  be a culprit, like heavy regex or long lists of regex. Note: this value is
  exactly lat_ns_tot divided by cpu_calls.

lat_ns_tot : integer
  Returns the total number of nanoseconds spent between the moment the task
  handling the stream is woken up and the moment it is effectively called. This
  number is reset for each new request on the same connections in case of HTTP
  keep-alive. This value indicates the overall latency inflicted to the current
  request by all other requests being processed in parallel, and is a direct
  indicator of perceived performance due to noisy neighbours. In order to keep
  the value low, it is possible to reduce the scheduler's run queue depth using
  "tune.runqueue-depth", to reduce the number of concurrent events processed at
  once using "tune.maxpollevents", to decrease the stream's nice value using
  the "nice" option on the "bind" lines or in the frontend, to enable low
  latency scheduling using "tune.sched.low-latency", or to look for other heavy
  requests in logs (those exhibiting large values of "cpu_ns_avg"), whose
  processing needs to be adjusted or fixed. Compression of large buffers could
  be a culprit, like heavy regex or long lists of regex. Note: while it
  may intuitively seem that the total latency adds to a transfer time, it is
  almost never true because while a task waits for the CPU, network buffers
  continue to fill up and the next call will process more at once. The value
  may be artificially high due to a high cpu_calls count, for example when
  processing many HTTP chunks, and for this reason it is often preferred to log
  lat_ns_avg instead, which is a more relevant performance indicator.

meth(<method>) : method
  Returns a method.

nbsrv([<backend>]) : integer
  Returns an integer value corresponding to the number of usable servers of
  either the current backend or the named backend. This is mostly used with
  ACLs but can also be useful when added to logs. This is normally used to
  switch to an alternate backend when the number of servers is too low to
  to handle some load. It is useful to report a failure when combined with
  "monitor fail".

pid : integer
  Return the PID of the current process. In most cases this is the PID of the
  worker process.

prio_class : integer
  Returns the priority class of the current stream for http mode or connection
  for tcp mode. The value will be that set by the last call to "http-request
  set-priority-class" or "tcp-request content set-priority-class".

prio_offset : integer
  Returns the priority offset of the current stream for http mode or
  connection for tcp mode. The value will be that set by the last call to
  "http-request set-priority-offset" or "tcp-request content
  set-priority-offset".

proc : integer
  Always returns value 1 (historically it would return the calling process
  number).

queue([<backend>]) : integer
  Returns the total number of queued connections of the designated backend,
  including all the connections in server queues. If no backend name is
  specified, the current one is used, but it is also possible to check another
  one. This is useful with ACLs or to pass statistics to backend servers. This
  can be used to take actions when queuing goes above a known level, generally
  indicating a surge of traffic or a massive slowdown on the servers. One
  possible action could be to reject new users but still accept old ones. See
  also the "avg_queue", "be_conn", and "be_sess_rate" fetches.

quic_enabled : boolean
  Return true when the support for QUIC transport protocol was compiled and
  if this protocol was not disabled by "no-quic" global option. See also "no-quic"
  global option.

rand([<range>]) : integer
  Returns a random integer value within a range of <range> possible values,
  starting at zero. If the range is not specified, it defaults to 2^32, which
  gives numbers between 0 and 4294967295. It can be useful to pass some values
  needed to take some routing decisions for example, or just for debugging
  purposes. This random must not be used for security purposes.

srv_conn([<backend>/]<server>) : integer
  Returns an integer value corresponding to the number of currently established
  connections on the designated server, possibly including the connection being
  evaluated. If <backend> is omitted, then the server is looked up in the
  current backend. It can be used to use a specific farm when one server is
  full, or to inform the server about our view of the number of active
  connections with it. See also the "fe_conn", "be_conn", "queue", and
  "srv_conn_free" fetch methods.

srv_conn_free([<backend>/]<server>) : integer
  Returns an integer value corresponding to the number of available connections
  on the designated server, possibly including the connection being evaluated.
  The value does not include queue slots. If <backend> is omitted, then the
  server is looked up in the current backend. It can be used to use a specific
  farm when one server is full, or to inform the server about our view of the
  number of active connections with it. See also the "be_conn_free" and
  "srv_conn" fetch methods.

  OTHER CAVEATS AND NOTES: If the server maxconn is 0, then this fetch clearly
  does not make sense, in which case the value returned will be -1.

srv_is_up([<backend>/]<server>) : boolean
  Returns true when the designated server is UP, and false when it is either
  DOWN or in maintenance mode. If <backend> is omitted, then the server is
  looked up in the current backend. It is mainly used to take action based on
  an external status reported via a health check (e.g. a geographical site's
  availability). Another possible use which is more of a hack consists in
  using dummy servers as boolean variables that can be enabled or disabled from
  the CLI, so that rules depending on those ACLs can be tweaked in realtime.

srv_iweight([<backend>/]<server>) : integer
  Returns an integer corresponding to the server's initial weight. If <backend>
  is omitted, then the server is looked up in the current backend. See also
  "srv_weight" and "srv_uweight".

srv_queue([<backend>/]<server>) : integer
  Returns an integer value corresponding to the number of connections currently
  pending in the designated server's queue. If <backend> is omitted, then the
  server is looked up in the current backend. It can sometimes be used together
  with the "use-server" directive to force to use a known faster server when it
  is not much loaded. See also the "srv_conn", "avg_queue" and "queue" sample
  fetch methods.

srv_sess_rate([<backend>/]<server>) : integer
  Returns an integer corresponding to the sessions creation rate on the
  designated server, in number of new sessions per second. If <backend> is
  omitted, then the server is looked up in the current backend. This is mostly
  used with ACLs but can make sense with logs too. This is used to switch to an
  alternate backend when an expensive or fragile one reaches too high a session
  rate, or to limit abuse of service (e.g. prevent latent requests from
  overloading servers).

  Example :
        # Redirect to a separate back
        acl srv1_full srv_sess_rate(be1/srv1) gt 50
        acl srv2_full srv_sess_rate(be1/srv2) gt 50
        use_backend be2 if srv1_full or srv2_full

srv_uweight([<backend>/]<server>) : integer
  Returns an integer corresponding to the user visible server's weight. If
  <backend> is omitted, then the server is looked up in the current
  backend. See also "srv_weight" and "srv_iweight".

srv_weight([<backend>/]<server>) : integer
  Returns an integer corresponding to the current (or effective) server's
  weight. If <backend> is omitted, then the server is looked up in the current
  backend. See also "srv_iweight" and "srv_uweight".

stopping : boolean
  Returns TRUE if the process calling the function is currently stopping. This
  can be useful for logging, or for relaxing certain checks or helping close
  certain connections upon graceful shutdown.

str(<string>) : string
  Returns a string.

table_avl([<table>]) : integer
  Returns the total number of available entries in the current proxy's
  stick-table or in the designated stick-table. See also "table_cnt".

table_cnt([<table>]) : integer
  Returns the total number of entries currently in use in the current proxy's
  stick-table or in the designated stick-table. See also "table_conn_cnt" and
  table_avl for other entry counting methods.

term_events : string
  Returns all known termination events for all entities attached a stream, on
  client and server sides. A tuple of seven elements is returned with following info:

    - the termination events of the frontend connection
    - the termination events of the frontend mux connection
    - the termination events of the frontend stream endpoint descriptor
      (the mux stream or the applet)
    - the termination events of the stream
    - the termination events of the backend stream endpoint descriptor
      (the mux stream or the applet)
    - the termination events of the backend mux connection
    - the termination events of the backend connection

  At each level, the first four events are reported. An empty string is
  returned if no event was reported yet for a specific level. If termination
  events are not supported, a "-" is returned.

  It must only be used for debugging purpose. The exact format is not
  documented because it may evolve depending on developers requirements.

thread : integer
  Returns an integer value corresponding to the position of the thread calling
  the function, between 0 and (global.nbthread-1). This is useful for logging
  and debugging purposes.

txn.id32 : integer
  Returns the internal transaction ID. It is a 32bits integer. So, in absolute,
  its value is not unique, transaction IDs may wrap. The wrapping period
  depends on the request rate. In practice, it should not be an issue. For a
  true unique ID, see "unique-id-format" directive.

txn.sess_term_state : string
  Returns the TCP or HTTP stream termination state, as reported in the log. It
  is a 2-characters string, The final stream state followed by the event which
  caused its to terminate. See section 8.5 about stream state at disconnection
  for the list of possible events. The current value at time the sample fetch
  is evaluated is returned. It is subject to change. Except used with ACLs in
  "http-after-response" rule sets or in log messages, it will always be "--".

  Example:
      # Return a 429-Too-Many-Requests if stream timed out in queue
      http-after-response set-status 429 if { txn.sess_term_state  "sQ" }

uptime : integer
  Returns the uptime of the current HAProxy worker in seconds.

uuid([<version>]) : string
  Returns a UUID following the RFC 9562 standard. If the version is not
  specified, a UUID version 4 (fully random) is returned.

  Versions 4 and 7 are supported.

var(<var-name>[,<default>]) : undefined
  Returns a variable with the stored type. If the variable is not set, the
  sample fetch fails, unless a default value is provided, in which case it will
  return it as a string. Empty strings are permitted. See section 2.8 about
  variables for details.

wait_end : boolean
  This fetch either returns true when the inspection period is over, or does
  not fetch. It is only used in ACLs, in conjunction with content analysis to
  avoid returning a wrong verdict early. It may also be used to delay some
  actions, such as a delayed reject for some special addresses. Since it either
  stops the rules evaluation or immediately returns true, it is recommended to
  use this acl as the last one in a rule. Please note that the default ACL
  "WAIT_END" is always usable without prior declaration. This test was designed
  to be used with TCP request content inspection.

  Examples :
     # delay every incoming request by 2 seconds
     tcp-request inspect-delay 2s
     tcp-request content accept if WAIT_END

     # don't immediately tell bad guys they are rejected
     tcp-request inspect-delay 10s
     acl goodguys src 10.0.0.0/24
     acl badguys  src 10.0.1.0/24
     tcp-request content accept if goodguys
     tcp-request content reject if badguys WAIT_END
     tcp-request content reject

waiting_entity : string
  This returns the identity of the entity that was waiting to continue its
  processing when an error or a timeout was encountered. It may be the a rule
  or a filter for instance. However, this list is not exhaustive and the format
  of all possible entities is not forcefully documented.

  When the entity is a rule, its location is returned. It is the configuration
  file containing the rule followed by the line where the rule is defined in
  this file, separated by a colon.

  For a filter, its identifier is returned as defined by the developers. If
  this identifier is not defined, an hexadecimal value is returned
  corresponding to an unique internal identifier.

  The main purpose of this function is to be able to report in logs the entity
  blocking the stream analysis when an error or a timeout was encountered,
  interrupting this processing, in order to help debugging issues. The
  information returned on entities may changed in time and must not be used for
  something else than debugging.

  Example:
      # Log the waiting entity, if any, and only if an error is reported
      log-format "$HAPROXY_HTTP_LOG_FMT %{Q}[waiting_entity,when(error)]


7.3.3. Fetching samples at Layer 4
----------------------------------

The layer 4 usually describes just the transport layer which in HAProxy is
closest to the connection, where no content is yet made available. The fetch
methods described here are usable as low as the "tcp-request connection" rule
sets unless they require some future information. Those generally include
TCP/IP addresses and ports, as well as elements from stick-tables related to
the incoming connection. For retrieving a value from a sticky counters, the
counter number can be explicitly set as 0, 1, or 2 using the pre-defined
"sc0_", "sc1_", or "sc2_" prefix. These three pre-defined prefixes can only be
used if the global "tune.stick-counters" value does not exceed 3, otherwise the
counter number can be specified as the first integer argument when using the
"sc_" prefix starting from "sc_0" to "sc_N" where N is (tune.stick-counters-1).
An optional table may be specified with the "sc*" form, in which case the
currently tracked key will be looked up into this alternate table instead of
the table currently being tracked.

Summary of sample fetch methods in this section and their respective types:

  keyword                                          output type
-------------------------------------------------+-------------
accept_date([<unit>])                              integer
bc.timer.connect                                   integer
bc_be_queue                                        integer
bc_dst                                             ip
bc_dst_port                                        integer
bc_err                                             integer
bc_err_name                                        string
bc_err_str                                         string
bc_glitches                                        integer
bc_http_major                                      integer
bc_nb_streams                                      integer
bc_reused                                          boolean
bc_rtt(<unit>)                                     integer
bc_rttvar(<unit>)                                  integer
bc_settings_streams_limit                          integer
bc_src                                             ip
bc_src_port                                        integer
bc_srv_queue                                       integer
be_id                                              integer
be_name                                            string
be_server_timeout                                  integer
be_tunnel_timeout                                  integer
bytes_in                                           integer
bytes_out                                          integer
cur_client_timeout                                 integer
cur_server_timeout                                 integer
cur_tunnel_timeout                                 integer
dst                                                ip
dst_conn                                           integer
dst_is_local                                       boolean
dst_port                                           integer
fc.timer.handshake                                 integer
fc.timer.total                                     integer
fc_dst                                             ip
fc_dst_is_local                                    boolean
fc_dst_port                                        integer
fc_err                                             integer
fc_err_name                                        string
fc_err_str                                         string
fc_fackets                                         integer
fc_glitches                                        integer
fc_http_major                                      integer
fc_lost                                            integer
fc_nb_streams                                      integer
fc_pp_authority                                    string
fc_pp_tlv(<id>)                                    string
fc_pp_unique_id                                    string
fc_rcvd_proxy                                      boolean
fc_reordering                                      integer
fc_retrans                                         integer
fc_rtt(<unit>)                                     integer
fc_rttvar(<unit>)                                  integer
fc_sacked                                          integer
fc_settings_streams_limit                          integer
fc_src                                             ip
fc_src_is_local                                    boolean
fc_src_port                                        integer
fc_unacked                                         integer
fe_client_timeout                                  integer
fe_defbe                                           string
fe_id                                              integer
fe_name                                            string
res.timer.data                                     integer
sc0_bytes_in_rate([<table>])                       integer
sc0_bytes_out_rate([<table>])                      integer
sc0_clr_gpc0([<table>])                            integer
sc0_clr_gpc1([<table>])                            integer
sc0_conn_cnt([<table>])                            integer
sc0_conn_cur([<table>])                            integer
sc0_conn_rate([<table>])                           integer
sc0_get_gpc0([<table>])                            integer
sc0_get_gpc1([<table>])                            integer
sc0_get_gpt0([<table>])                            integer
sc0_glitch_cnt([<table>])                          integer
sc0_glitch_rate([<table>])                         integer
sc0_gpc0_rate([<table>])                           integer
sc0_gpc1_rate([<table>])                           integer
sc0_http_err_cnt([<table>])                        integer
sc0_http_err_rate([<table>])                       integer
sc0_http_fail_cnt([<table>])                       integer
sc0_http_fail_rate([<table>])                      integer
sc0_http_req_cnt([<table>])                        integer
sc0_http_req_rate([<table>])                       integer
sc0_inc_gpc0([<table>])                            integer
sc0_inc_gpc1([<table>])                            integer
sc0_kbytes_in([<table>])                           integer
sc0_kbytes_out([<table>])                          integer
sc0_key                                            any
sc0_sess_cnt([<table>])                            integer
sc0_sess_rate([<table>])                           integer
sc0_tracked([<table>])                             boolean
sc0_trackers([<table>])                            integer
sc1_bytes_in_rate([<table>])                       integer
sc1_bytes_out_rate([<table>])                      integer
sc1_clr_gpc0([<table>])                            integer
sc1_clr_gpc1([<table>])                            integer
sc1_conn_cnt([<table>])                            integer
sc1_conn_cur([<table>])                            integer
sc1_conn_rate([<table>])                           integer
sc1_get_gpc0([<table>])                            integer
sc1_get_gpc1([<table>])                            integer
sc1_get_gpt0([<table>])                            integer
sc1_glitch_cnt([<table>])                          integer
sc1_glitch_rate([<table>])                         integer
sc1_gpc0_rate([<table>])                           integer
sc1_gpc1_rate([<table>])                           integer
sc1_http_err_cnt([<table>])                        integer
sc1_http_err_rate([<table>])                       integer
sc1_http_fail_cnt([<table>])                       integer
sc1_http_fail_rate([<table>])                      integer
sc1_http_req_cnt([<table>])                        integer
sc1_http_req_rate([<table>])                       integer
sc1_inc_gpc0([<table>])                            integer
sc1_inc_gpc1([<table>])                            integer
sc1_kbytes_in([<table>])                           integer
sc1_kbytes_out([<table>])                          integer
sc1_key                                            any
sc1_sess_cnt([<table>])                            integer
sc1_sess_rate([<table>])                           integer
sc1_tracked([<table>])                             boolean
sc1_trackers([<table>])                            integer
sc2_bytes_in_rate([<table>])                       integer
sc2_bytes_out_rate([<table>])                      integer
sc2_clr_gpc0([<table>])                            integer
sc2_clr_gpc1([<table>])                            integer
sc2_conn_cnt([<table>])                            integer
sc2_conn_cur([<table>])                            integer
sc2_conn_rate([<table>])                           integer
sc2_get_gpc0([<table>])                            integer
sc2_get_gpc1([<table>])                            integer
sc2_get_gpt0([<table>])                            integer
sc2_glitch_cnt([<table>])                          integer
sc2_glitch_rate([<table>])                         integer
sc2_gpc0_rate([<table>])                           integer
sc2_gpc1_rate([<table>])                           integer
sc2_http_err_cnt([<table>])                        integer
sc2_http_err_rate([<table>])                       integer
sc2_http_fail_cnt([<table>])                       integer
sc2_http_fail_rate([<table>])                      integer
sc2_http_req_cnt([<table>])                        integer
sc2_http_req_rate([<table>])                       integer
sc2_inc_gpc0([<table>])                            integer
sc2_inc_gpc1([<table>])                            integer
sc2_kbytes_in([<table>])                           integer
sc2_kbytes_out([<table>])                          integer
sc2_key                                            any
sc2_sess_cnt([<table>])                            integer
sc2_sess_rate([<table>])                           integer
sc2_tracked([<table>])                             boolean
sc2_trackers([<table>])                            integer
sc_bytes_in_rate(<ctr>[,<table>])                  integer
sc_bytes_out_rate(<ctr>[,<table>])                 integer
sc_clr_gpc(<idx>,<ctr>[,<table>])                  integer
sc_clr_gpc0(<ctr>[,<table>])                       integer
sc_clr_gpc1(<ctr>[,<table>])                       integer
sc_conn_cnt(<ctr>[,<table>])                       integer
sc_conn_cur(<ctr>[,<table>])                       integer
sc_conn_rate(<ctr>[,<table>])                      integer
sc_get_gpc(<idx>,<ctr>[,<table>])                  integer
sc_get_gpc0(<ctr>[,<table>])                       integer
sc_get_gpc1(<ctr>[,<table>])                       integer
sc_get_gpt(<idx>,<ctr>[,<table>])                  integer
sc_get_gpt0(<ctr>[,<table>])                       integer
sc_glitch_cnt(<ctr>[,<table>])                     integer
sc_glitch_rate(<ctr>[,<table>])                    integer
sc_gpc0_rate(<ctr>[,<table>])                      integer
sc_gpc1_rate(<ctr>[,<table>])                      integer
sc_gpc_rate(<idx>,<ctr>[,<table>])                 integer
sc_http_err_cnt(<ctr>[,<table>])                   integer
sc_http_err_rate(<ctr>[,<table>])                  integer
sc_http_fail_cnt(<ctr>[,<table>])                  integer
sc_http_fail_rate(<ctr>[,<table>])                 integer
sc_http_req_cnt(<ctr>[,<table>])                   integer
sc_http_req_rate(<ctr>[,<table>])                  integer
sc_inc_gpc(<idx>,<ctr>[,<table>])                  integer
sc_inc_gpc0(<ctr>[,<table>])                       integer
sc_inc_gpc1(<ctr>[,<table>])                       integer
sc_kbytes_in(<ctr>[,<table>])                      integer
sc_kbytes_out(<ctr>[,<table>])                     integer
sc_key(<ctr>)                                      any
sc_sess_cnt(<ctr>[,<table>])                       integer
sc_sess_rate(<ctr>[,<table>])                      integer
sc_tracked(<ctr>[,<table>])                        boolean
sc_trackers(<ctr>[,<table>])                       integer
so_id                                              integer
so_name                                            string
src                                                ip
src_bytes_in_rate([<table>])                       integer
src_bytes_out_rate([<table>])                      integer
src_clr_gpc(<idx>[,<table>])                       integer
src_clr_gpc0([<table>])                            integer
src_clr_gpc1([<table>])                            integer
src_conn_cnt([<table>])                            integer
src_conn_cur([<table>])                            integer
src_conn_rate([<table>])                           integer
src_get_gpc(<idx>[,<table>])                       integer
src_get_gpc0([<table>])                            integer
src_get_gpc1([<table>])                            integer
src_get_gpt(<idx>[,<table>])                       integer
src_get_gpt0([<table>])                            integer
src_glitch_cnt([<table>])                          integer
src_glitch_rate([<table>])                         integer
src_gpc0_rate([<table>])                           integer
src_gpc1_rate([<table>])                           integer
src_gpc_rate(<idx>[,<table>])                      integer
src_http_err_cnt([<table>])                        integer
src_http_err_rate([<table>])                       integer
src_http_fail_cnt([<table>])                       integer
src_http_fail_rate([<table>])                      integer
src_http_req_cnt([<table>])                        integer
src_http_req_rate([<table>])                       integer
src_inc_gpc(<idx>[,<table>])                       integer
src_inc_gpc0([<table>])                            integer
src_inc_gpc1([<table>])                            integer
src_is_local                                       boolean
src_kbytes_in([<table>])                           integer
src_kbytes_out([<table>])                          integer
src_port                                           integer
src_sess_cnt([<table>])                            integer
src_sess_rate([<table>])                           integer
src_updt_conn_cnt([<table>])                       integer
srv_id                                             integer
srv_name                                           string
txn.conn_retries                                   integer
txn.redispatched                                   boolean
-------------------------------------------------+-------------

Detailed list:

accept_date([<unit>]) : integer
  This is the exact date when the connection was received by HAProxy
  (which might be very slightly different from the date observed on the
  network if there was some queuing in the system's backlog). This is usually
  the same date which may appear in any upstream firewall's log. When used in
  HTTP mode, the accept_date field will be reset to the first moment the
  connection is ready to receive a new request (end of previous response for
  HTTP/1, immediately after previous request for HTTP/2).

  Returns a value in number of seconds since epoch.

  <unit> is facultative, and can be set to "s" for seconds (default behavior),
  "ms" for  milliseconds or "us" for microseconds.
  If unit is set, return value is an integer reflecting either seconds,
  milliseconds or microseconds since epoch.
  It is useful when a time resolution of less than a second is needed.

bc.timer.connect : integer
  Total time to establish the TCP connection to the server.  This is the
  equivalent of %Tc in the log-format. This is reported in milliseconds (ms).
  For more information see Section 8.4 "Timing events"

bc_be_queue : integer
  Number of streams de-queued while waiting for a connection slot on the
  target backend. This is the equivalent of %bq in the log-format.

bc_dst : ip
  This is the destination ip address of the connection on the server side,
  which is the server address HAProxy connected to. It is of type IP and works
  on both IPv4 and IPv6 tables.  On IPv6 tables, IPv4 address is mapped to its
  IPv6 equivalent, according to RFC 4291.

bc_dst_port : integer
  Returns an integer value corresponding to the destination TCP port of the
  connection on the server side, which is the port HAProxy connected to.

bc_err : integer
  Returns the ID of the error that might have occurred on the current backend
  connection. See the "fc_err_str" fetch for a full list of error codes
  and their corresponding error message.

bc_err_name : string
  Returns the internal error name describing what problem happened on the
  backend connection, resulting in a connection failure. This string is made of
  a single word and is empty when no error is present. It corresponds to the
  "name" column in the table presented in the "fc_err_str" keyword.

bc_err_str : string
  Returns an error message describing what problem happened on the current
  backend connection, resulting in a connection failure. See the
  "fc_err_str" fetch for a full list of error codes and their
  corresponding error message.

bc_glitches : integer
  Returns the number of protocol glitches counted on the backend connection.
  These generally cover protocol violations as well as small anomalies that
  generally indicate a bogus or misbehaving server that may cause trouble in
  the infrastructure (e.g. cause connections to be aborted early, inducing
  frequent TLS renegotiations). These may also be caused by too large responses
  that cannot fit into a single buffer, explaining HTTP 502 errors. Ideally
  this number should remain zero, though it's generally fine if it remains very
  low compared to the total number of requests. These values should normally
  not be considered as alarming (especially small ones), though a sudden jump
  may indicate an anomaly somewhere. Not all protocol multiplexers measure this
  metric and the only way to get more details about the events is to enable
  traces to capture all exchanges.

bc_http_major : integer
  Returns the backend connection's HTTP major version encoding, which may be 1
  for HTTP/0.9 to HTTP/1.1 or 2 for HTTP/2. Note, this is based on the on-wire
  encoding and not the version present in the request header.

bc_nb_streams : integer
  Returns the number of streams opened on the backend connection.

bc_reused : boolean
  Returns true if the transfer was performed via a reused backend connection.

bc_rtt(<unit>) : integer
  Returns the Round Trip Time (RTT) measured by the kernel for the backend
  connection. <unit> is facultative, by default the unit is milliseconds. <unit>
  can be set to "ms" for milliseconds or "us" for microseconds. If the server
  connection is not established, if the connection is not TCP or if the
  operating system does not support TCP_INFO, for example Linux kernels before
  2.4, the sample fetch fails.

bc_rttvar(<unit>) : integer
  Returns the Round Trip Time (RTT) variance measured by the kernel for the
  backend connection. <unit> is facultative, by default the unit is milliseconds.
  <unit> can be set to "ms" for milliseconds or "us" for microseconds. If the
  server connection is not established, if the connection is not TCP or if the
  operating system does not support TCP_INFO, for example Linux kernels before
  2.4, the sample fetch fails.

bc_settings_streams_limit : integer
  Returns the maximum number of streams allowed on the backend connection. For
  TCP and HTTP/1.1 connections, it is always 1. For other protocols, it depends
  on the settings negotiated with the server.

bc_src : ip
  This is the source ip address of the connection on the server side, which is
  the server address HAProxy connected from. It is of type IP and works on both
  IPv4 and IPv6 tables. On IPv6 tables, IPv4 addresses are mapped to their IPv6
  equivalent, according to RFC 4291.

bc_src_port : integer
  Returns an integer value corresponding to the TCP source port of the
  connection on the server side, which is the port HAProxy connected from.

bc_srv_queue : integer
  Number of streams de-queued while waiting for a connection slot on the
  target server. This is the equivalent of %sq in the log-format.

be_id : integer
  Returns an integer containing the current backend's id. It can be used in
  frontends with responses to check which backend processed the request. If
  used in a frontend and no backend was used, it returns the current
  frontend's id. It can also be used in a tcp-check or an http-check ruleset.

be_name : string
  Returns a string containing the current backend's name. It can be used in
  frontends with responses to check which backend processed the request. If
  used in a frontend and no backend was used, it returns the current
  frontend's name. It can also be used in a tcp-check or an http-check
  ruleset.

be_server_timeout : integer
  Returns the configuration value in millisecond for the server timeout of the
  current backend. This timeout can be overwritten by a "set-timeout" rule. See
  also the "cur_server_timeout".

be_tunnel_timeout : integer
  Returns the configuration value in millisecond for the tunnel timeout of the
  current backend. This timeout can be overwritten by a "set-timeout" rule. See
  also the "cur_tunnel_timeout".

bytes_in : integer
  This returns the number of bytes uploaded from the client to the server. The
  value corresponds to what was received by HAProxy, including some headers and
  some internal encoding overhead. Request compression does not affect the
  value reported here.

bytes_out : integer
  This is the number of bytes transmitted from the server to the client. The
  value corresponds to what was received by HAProxy, including some headers and
  some internal encoding overhead. Response compression does not affect the
  value reported here.

cur_client_timeout : integer
  Returns the currently applied client timeout in millisecond for the stream.
  In the default case, this will be equal to fe_client_timeout unless a
  "set-timeout" rule has been applied. See also "fe_client_timeout".

cur_server_timeout : integer
  Returns the currently applied server timeout in millisecond for the stream.
  In the default case, this will be equal to be_server_timeout unless a
  "set-timeout" rule has been applied. See also "be_server_timeout".

cur_tunnel_timeout : integer
  Returns the currently applied tunnel timeout in millisecond for the stream.
  In the default case, this will be equal to be_tunnel_timeout unless a
  "set-timeout" rule has been applied. See also "be_tunnel_timeout".

dst : ip
  This is the destination IP address of the connection on the client side,
  which is the address the client connected to. Any tcp/http rules may alter
  this address. It can be useful when running in transparent mode. It is of
  type IP and works on both IPv4 and IPv6 tables.  On IPv6 tables, IPv4 address
  is mapped to its IPv6 equivalent, according to RFC 4291. When the incoming
  connection passed through address translation or redirection involving
  connection tracking, the original destination address before the redirection
  will be reported. On Linux systems, the source and destination may seldom
  appear reversed if the nf_conntrack_tcp_loose sysctl is set, because a late
  response may reopen a timed out connection and switch what is believed to be
  the source and the destination.

dst_conn : integer
  Returns an integer value corresponding to the number of currently established
  connections on the same socket including the one being evaluated. It is
  normally used with ACLs but can as well be used to pass the information to
  servers in an HTTP header or in logs. It can be used to either return a sorry
  page before hard-blocking, or to use a specific backend to drain new requests
  when the socket is considered saturated. This offers the ability to assign
  different limits to different listening ports or addresses. See also the
  "fe_conn" and "be_conn" fetches.

dst_is_local : boolean
  Returns true if the destination address of the incoming connection is local
  to the system, or false if the address doesn't exist on the system, meaning
  that it was intercepted in transparent mode. It can be useful to apply
  certain rules by default to forwarded traffic and other rules to the traffic
  targeting the real address of the machine. For example the stats page could
  be delivered only on this address, or SSH access could be locally redirected.
  Please note that the check involves a few system calls, so it's better to do
  it only once per connection.

dst_port : integer
  Returns an integer value corresponding to the destination TCP port of the
  connection on the client side, which is the port the client connected to.
  Any tcp/http rules may alter this address. This might be used when running in
  transparent mode, when assigning dynamic ports to some clients for a whole
  application session, to stick all users to a same server, or to pass the
  destination port information to a server using an HTTP header.

fc.timer.handshake : integer
  Total time to accept tcp connection and execute handshakes for low level
  protocols. Currently, these protocols are proxy-protocol and SSL. This is the
  equivalent of %Th in the log-format.  This is reported in milliseconds (ms).
  For more information see Section 8.4 "Timing events"

fc.timer.total : integer
  Total stream duration time, between the moment the proxy accepted it and the
  moment both ends were closed. This is the equivalent of %Tt in the log-format.
  This is reported in milliseconds (ms). For more information see Section 8.4
  "Timing events"

fc_dst : ip
  This is the original destination IP address of the connection on the client
  side. Only "tcp-request connection" rules may alter this address. See "dst"
  for details.

fc_dst_is_local : boolean
  Returns true if the original destination address of the incoming connection
  is local to the system, or false if the address doesn't exist on the
  system. See "dst_is_local" for details.

fc_dst_port : integer
  Returns an integer value corresponding to the original destination TCP port
  of the connection on the client side. Only "tcp-request connection" rules may
  alter this address. See "dst-port" for details.

fc_err : integer
  Returns the ID of the error that might have occurred on the current
  connection. Any strictly positive value of this fetch indicates that the
  connection did not succeed and would result in an error log being output (as
  described in section 8.2.5). See the "fc_err_str" fetch for a full list of
  error codes and their corresponding error message.

fc_err_name : string
  Returns the internal error name describing what problem happened on the
  frontend connection, resulting in a connection failure. This string is made
  of a single word and is empty when no error is present. It corresponds to the
  "name" column in the table presented in the "fc_err_str" keyword.

fc_err_str : string
  Returns an error message describing what problem happened on the current
  connection, resulting in a connection failure. This string corresponds to the
  "message" part of the error log format (see section 8.2.5). See below for a
  full list of error codes and their corresponding error messages :

  +----+------------------+-------------------------------------------------------------------------+
  | ID | name             | message                                                                 |
  +----+------------------+-------------------------------------------------------------------------+
  | 0  | -                | "Success"                                                               |
  | 1  | CONF_FDLIM       | "Reached configured maxconn value"                                      |
  | 2  | PROC_FDLIM       | "Too many sockets on the process"                                       |
  | 3  | SYS_FDLIM        | "Too many sockets on the system"                                        |
  | 4  | SYS_MEMLIM       | "Out of system buffers"                                                 |
  | 5  | NOPROTO          | "Protocol or address family not supported"                              |
  | 6  | SOCK_ERR         | "General socket error"                                                  |
  | 7  | PORT_RANGE       | "Source port range exhausted"                                           |
  | 8  | CANT_BIND        | "Can't bind to source address"                                          |
  | 9  | FREE_PORTS       | "Out of local source ports on the system"                               |
  | 10 | ADDR_INUSE       | "Local source address already in use"                                   |
  | 11 | PRX_EMPTY        | "Connection closed while waiting for PROXY protocol header"             |
  | 12 | PRX_ABORT        | "Connection error while waiting for PROXY protocol header"              |
  | 13 | PRX_TIMEOUT      | "Timeout while waiting for PROXY protocol header"                       |
  | 14 | PRX_TRUNCATED    | "Truncated PROXY protocol header received"                              |
  | 15 | PRX_NOT_HDR      | "Received something which does not look like a PROXY protocol header"   |
  | 16 | PRX_BAD_HDR      | "Received an invalid PROXY protocol header"                             |
  | 17 | PRX_BAD_PROTO    | "Received an unhandled protocol in the PROXY protocol header"           |
  | 18 | CIP_EMPTY        | "Connection closed while waiting for NetScaler Client IP header"        |
  | 19 | CIP_ABORT        | "Connection error while waiting for NetScaler Client IP header"         |
  | 20 | CIP_TIMEOUT      | "Timeout while waiting for a NetScaler Client IP header"                |
  | 21 | CIP_TRUNCATED    | "Truncated NetScaler Client IP header received"                         |
  | 22 | CIP_BAD_MAGIC    | "Received an invalid NetScaler Client IP magic number"                  |
  | 23 | CIP_BAD_PROTO    | "Received an unhandled protocol in the NetScaler Client IP header"      |
  | 24 | SSL_EMPTY        | "Connection closed during SSL handshake"                                |
  | 25 | SSL_ABORT        | "Connection error during SSL handshake"                                 |
  | 26 | SSL_TIMEOUT      | "Timeout during SSL handshake"                                          |
  | 27 | SSL_TOO_MANY     | "Too many SSL connections"                                              |
  | 28 | SSL_NO_MEM       | "Out of memory when initializing an SSL connection"                     |
  | 29 | SSL_RENEG        | "Rejected a client-initiated SSL renegotiation attempt"                 |
  | 30 | SSL_CA_FAIL      | "SSL client CA chain cannot be verified"                                |
  | 31 | SSL_CRT_FAIL     | "SSL client certificate not trusted"                                    |
  | 32 | SSL_MISMATCH     | "Server presented an SSL certificate different from the configured one" |
  | 33 | SSL_MISMATCH_SNI | "Server presented an SSL certificate different from the expected one"   |
  | 34 | SSL_HANDSHAKE    | "SSL handshake failure"                                                 |
  | 35 | SSL_HANDSHAKE_HB | "SSL handshake failure after heartbeat"                                 |
  | 36 | SSL_KILLED_HB    | "Stopped a TLSv1 heartbeat attack (CVE-2014-0160)"                      |
  | 37 | SSL_NO_TARGET    | "Attempt to use SSL on an unknown target (internal error)"              |
  | 38 | SSL_EARLY_FAILED | "Server refused early data"                                             |
  | 39 | SOCKS4_SEND      | "SOCKS4 Proxy write error during handshake"                             |
  | 40 | SOCKS4_RECV      | "SOCKS4 Proxy read error during handshake"                              |
  | 41 | SOCKS4_DENY      | "SOCKS4 Proxy deny the request"                                         |
  | 42 | SOCKS4_ABORT     | "SOCKS4 Proxy handshake aborted by server"                              |
  | 43 | SSL_FATAL        | "SSL fatal error"                                                       |
  | 44 | REVERSE          | "Reverse connect failure"                                               |
  | 45 | POLLERR          | "Poller reported POLLERR"                                               |
  | 46 | EREFUSED         | "ECONNREFUSED returned by OS"                                           |
  | 47 | ERESET           | "ECONNRESET returned by OS"                                             |
  | 48 | EUNREACH         | "ENETUNREACH returned by OS"                                            |
  | 49 | ENOMEM           | "ENOMEM returned by OS"                                                 |
  | 50 | EBADF            | "EBADF returned by OS"                                                  |
  | 51 | EFAULT           | "EFAULT returned by OS"                                                 |
  | 52 | EINVAL           | "EINVAL returned by OS"                                                 |
  | 53 | ENCONN           | "ENCONN returned by OS"                                                 |
  | 54 | ENSOCK           | "ENSOCK returned by OS"                                                 |
  | 55 | ENOBUFS          | "ENOBUFS returned by OS"                                                |
  | 56 | EPIPE            | "EPIPE returned by OS"                                                  |
  +----+------------------+-------------------------------------------------------------------------+

fc_fackets : integer
  Returns the fack counter measured by the kernel for the client
  connection. If the server connection is not established, if the connection is
  not TCP or if the operating system does not support TCP_INFO, for example
  Linux kernels before 2.4, the sample fetch fails.

fc_glitches : integer
  Returns the number of protocol glitches counted on the frontend connection.
  These generally cover protocol violations as well as small anomalies that
  generally indicate a bogus or misbehaving client that may cause trouble in
  the infrastructure, such as excess of errors in the logs, or many connections
  being aborted early, inducing frequent TLS renegotiations. These may also be
  caused by too large requests that cannot fit into a single buffer, explaining
  HTTP 400 errors. Ideally this number should remain zero, though it may be
  possible that some browsers playing with the protocol boundaries trigger it
  once in a while. These values should normally not be considered as alarming
  (especially small ones), though a sudden jump may indicate an anomaly
  somewhere. Large values (i.e. hundreds to thousands per connection, or as
  many as the requests) may indicate a purposely built client that is trying to
  fingerprint or attack the protocol stack. Not all protocol multiplexers
  measure this metric, and the only way to get more details about the events is
  to enable traces to capture all exchanges.

fc_http_major : integer
  Reports the front connection's HTTP major version encoding, which may be 1
  for HTTP/0.9 to HTTP/1.1 or 2 for HTTP/2. Note, this is based on the on-wire
  encoding and not on the version present in the request header.

fc_lost : integer
  If the connection is not TCP, nor QUIC, the sample fetch fails.
  For QUIC, returns the number of lost QUIC packets by the client connection.
  For TCP, returns the lost counter measured by the kernel for the client
  connection. If the server connection is not established, or if the operating
  system does not support TCP_INFO, for example Linux kernels before 2.4, the
  sample fetch fails.

fc_nb_streams : integer
  Returns the number of streams opened on the frontend connection.

fc_pp_authority : string
  Returns the first authority TLV sent by the client in the PROXY protocol
  header, if any.

fc_pp_tlv(<id>) : string
  Returns the TLV value for the given TLV ID. The ID must either be a numeric
  value between 0 and 255 or one of the following supported symbolic names
  that correspond to the TLV constant suffixes in the PPv2 spec:
  "ALPN": PP2_TYPE_ALPN, "AUTHORITY": PP2_TYPE_AUTHORITY,
  "CRC32": PP2_TYPE_CRC32C, "NETNS": PP2_TYPE_NETNS, "NOOP: PP2_TYPE_NOOP",
  "SSL": PP2_TYPE_SSL, "SSL_CIPHER": PP2_SUBTYPE_SSL_CIPHER,
  "SSL_CN": PP2_SUBTYPE_SSL_CN, "SSL_KEY_ALG": PP2_SUBTYPE_SSL_KEY_ALG,
  "SSL_SIG_ALG": PP2_SUBTYPE_SSL_SIG_ALG,
  "SSL_VERSION": PP2_SUBTYPE_SSL_VERSION, "UNIQUE_ID": PP2_TYPE_UNIQUE_ID.

  The received value must be smaller or equal to 1024 bytes. This is done to
  prevent potential DoS attacks. Values smaller or equal to 256 bytes will be
  able to be memory pooled. Therefore, try to restrict the length of sent
  values to 256 bytes for optimal performance.

  Note that unlike fc_pp_authority and fc_pp_unique_id, fc_pp_tlv is able to
  iterate over all occurrences of a requested TLV in case there are duplicate
  TLV IDs. The order of iteration matches the position in the PROXY protocol
  header. However, relying on duplicates should mostly be avoided as TLVs are
  typically assumed to be unique. Generally, finding duplicated TLV IDs
  indicates an error on the sender side of the PROXY protocol header.

fc_pp_unique_id : string
  Returns the first unique ID TLV sent by the client in the PROXY protocol
  header, if any.

fc_rcvd_proxy : boolean
  Returns true if the client initiated the connection with a PROXY protocol
  header.

fc_reordering : integer
  If the connection is not TCP, nor QUIC, the sample fetch fails.
  For QUIC, return the number of QUIC reordered packets for the client connection.
  For TCP, returns the reordering counter measured by the kernel for the client
  connection. If the server connection is not established, or if the operating
  system does not support TCP_INFO, for example Linux kernels before 2.4, the
  sample fetch fails.

fc_retrans : integer
  Returns the retransmits counter measured by the kernel for the client
  connection. If the server connection is not established, if the connection is
  not TCP or if the operating system does not support TCP_INFO, for example
  Linux kernels before 2.4, the sample fetch fails.

fc_rtt(<unit>) : integer
  If the connection is not TCP, nor QUIC, the sample fetch fails.
  For QUIC, returns Smoothed Round Trip Time for the client connection.
  For TCP, returns the Round Trip Time (RTT) measured by the kernel for the client
  connection. <unit> is facultative, by default the unit is milliseconds. <unit>
  can be set to "ms" for milliseconds or "us" for microseconds. If the server
  connection is not established, or if the operating system does not support
  TCP_INFO, for example Linux kernels before 2.4, the sample fetch fails.

fc_rttvar(<unit>) : integer
  If the connection is not TCP, nor QUIC, the sample fetch fails.
  For QUIC, returns Smoothed Round Trip Time variance for the client connection.
  For TCP, returns the Round Trip Time (RTT) variance measured by the kernel for
  the client connection. <unit> is facultative, by default the unit is milliseconds.
  <unit> can be set to "ms" for milliseconds or "us" for microseconds. If the
  server connection is not established, or if the operating system does not
  support TCP_INFO, for example Linux kernels before 2.4, the sample fetch fails.

fc_sacked : integer
  Returns the sacked counter measured by the kernel for the client connection.
  If the server connection is not established, if the connection is not TCP or
  if the operating system does not support TCP_INFO, for example Linux kernels
  before 2.4, the sample fetch fails.

fc_settings_streams_limit : integer
  Returns the maximum number of streams allowed on the frontend connection. For
  TCP and HTTP/1.1 connections, it is always 1. For other protocols, it depends
  on the settings negotiated with the client.

fc_src : ip
  This is the original source IP address of the connection on the client side
  Only "tcp-request connection" rules may alter this address. See "src" for
  details.

fc_src_is_local : boolean
  Returns true if the source address of incoming connection is local to the
  system, or false if the address doesn't exist on the system. See
  "src_is_local" for details.

fc_src_port : integer
  Returns an integer value corresponding to the TCP source port of the
  connection on the client side. Only "tcp-request connection" rules may alter
  this address. See "src-port" for details.

fc_unacked : integer
  Returns the unacked counter measured by the kernel for the client connection.
  If the server connection is not established, if the connection is not TCP or
  if the operating system does not support TCP_INFO, for example Linux kernels
  before 2.4, the sample fetch fails.

fe_client_timeout : integer
  Returns the configuration value in millisecond for the client timeout of the
  current frontend. This timeout can be overwritten by a "set-timeout" rule.

fe_defbe : string
  Returns a string containing the frontend's default backend name. It can be
  used in frontends to check which backend will handle requests by default.

fe_id : integer
  Returns an integer containing the current frontend's id. It can be used in
  backends to check from which frontend it was called, or to stick all users
  coming via a same frontend to the same server.

fe_name : string
  Returns a string containing the current frontend's name. It can be used in
  backends to check from which frontend it was called, or to stick all users
  coming via a same frontend to the same server.

res.timer.data : integer
  this is the total transfer time of the response payload till the last byte
  sent to the client. In HTTP it starts after the last response header (after
  Tr). This is the equivalent of %Td in the log-format and is reported in
  milliseconds (ms).  For more information see Section 8.4 "Timing events"

sc_bytes_in_rate(<ctr>[,<table>]) : integer
sc0_bytes_in_rate([<table>]) : integer
sc1_bytes_in_rate([<table>]) : integer
sc2_bytes_in_rate([<table>]) : integer
  Returns the average client-to-server bytes rate from the currently tracked
  counters, measured in amount of bytes over the period configured in the
  table. See also "table_bytes_in_rate".

sc_bytes_out_rate(<ctr>[,<table>]) : integer
sc0_bytes_out_rate([<table>]) : integer
sc1_bytes_out_rate([<table>]) : integer
sc2_bytes_out_rate([<table>]) : integer
  Returns the average server-to-client bytes rate from the currently tracked
  counters, measured in amount of bytes over the period configured in the
  table. See also "table_bytes_out_rate".

sc_clr_gpc(<idx>,<ctr>[,<table>]) : integer
  Clears the General Purpose Counter at the index <idx> of the array
  associated to the designated tracked counter of ID <ctr> from current
  proxy's stick table or from the designated stick-table <table>, and
  returns its previous value. <idx> is an integer between 0 and 99 and
  <ctr> an integer between 0 and 2.
  Before the first invocation, the stored value is zero, so first invocation
  will always return zero.
  This fetch applies only to the 'gpc' array data_type (and not to the legacy
  'gpc0' nor 'gpc1' data_types).

sc_clr_gpc0(<ctr>[,<table>]) : integer
sc0_clr_gpc0([<table>]) : integer
sc1_clr_gpc0([<table>]) : integer
sc2_clr_gpc0([<table>]) : integer
  Clears the first General Purpose Counter associated to the currently tracked
  counters, and returns its previous value. Before the first invocation, the
  stored value is zero, so first invocation will always return zero. This is
  typically used as a second ACL in an expression in order to mark a connection
  when a first ACL was verified :

  Example:
        # block if 5 consecutive requests continue to come faster than 10 sess
        # per second, and reset the counter as soon as the traffic slows down.
        acl abuse sc0_http_req_rate gt 10
        acl kill  sc0_inc_gpc0 gt 5
        acl save  sc0_clr_gpc0 ge 0
        tcp-request connection accept if !abuse save
        tcp-request connection reject if abuse kill

sc_clr_gpc1(<ctr>[,<table>]) : integer
sc0_clr_gpc1([<table>]) : integer
sc1_clr_gpc1([<table>]) : integer
sc2_clr_gpc1([<table>]) : integer
  Clears the second General Purpose Counter associated to the currently tracked
  counters, and returns its previous value. Before the first invocation, the
  stored value is zero, so first invocation will always return zero. This is
  typically used as a second ACL in an expression in order to mark a connection
  when a first ACL was verified.

sc_conn_cnt(<ctr>[,<table>]) : integer
sc0_conn_cnt([<table>]) : integer
sc1_conn_cnt([<table>]) : integer
sc2_conn_cnt([<table>]) : integer
  Returns the cumulative number of incoming connections from currently tracked
  counters. See also "table_conn_cnt".

sc_conn_cur(<ctr>[,<table>]) : integer
sc0_conn_cur([<table>]) : integer
sc1_conn_cur([<table>]) : integer
sc2_conn_cur([<table>]) : integer
  Returns the current amount of concurrent connections tracking the same
  tracked counters. This number is automatically incremented when tracking
  begins and decremented when tracking stops. See also "table_conn_cur".

sc_conn_rate(<ctr>[,<table>]) : integer
sc0_conn_rate([<table>]) : integer
sc1_conn_rate([<table>]) : integer
sc2_conn_rate([<table>]) : integer
  Returns the average connection rate from the currently tracked counters,
  measured in amount of connections over the period configured in the table.
  See also "table_conn_rate".

sc_get_gpc(<idx>,<ctr>[,<table>]) : integer
  Returns the value of the General Purpose Counter at the index <idx>
  in the GPC array and associated to the currently tracked counter of
  ID <ctr> from the current proxy's stick-table or from the designated
  stick-table <table>. <idx> is an integer between 0 and 99 and
  <ctr> an integer between 0 and 2. If there is not gpc stored at this
  index, zero is returned.
  This fetch applies only to the 'gpc' array data_type (and not to the legacy
  'gpc0' nor 'gpc1' data_types). See also "table_gpc" and "sc_inc_gpc".

sc_get_gpc0(<ctr>[,<table>]) : integer
sc0_get_gpc0([<table>]) : integer
sc1_get_gpc0([<table>]) : integer
sc2_get_gpc0([<table>]) : integer
  Returns the value of the first General Purpose Counter associated to the
  currently tracked counters. See also "table_gpc0" and sc/sc0/sc1/sc2_inc_gpc0.

sc_get_gpc1(<ctr>[,<table>]) : integer
sc0_get_gpc1([<table>]) : integer
sc1_get_gpc1([<table>]) : integer
sc2_get_gpc1([<table>]) : integer
  Returns the value of the second General Purpose Counter associated to the
  currently tracked counters. See also "table_gpc1" and sc/sc0/sc1/sc2_inc_gpc1.

sc_get_gpt(<idx>,<ctr>[,<table>]) : integer
  Returns the value of the first General Purpose Tag at the index <idx> of
  the array associated to the tracked counter of ID <ctr> and from the
  current proxy's sitck-table or the designated stick-table <table>. <idx>
  is an integer between 0 and 99 and <ctr> an integer between 0 and 2.
  If there is no GPT stored at this index, zero is returned.
  This fetch applies only to the 'gpt' array data_type (and not on
  the legacy 'gpt0' data-type). See also "table_gpt".

sc_get_gpt0(<ctr>[,<table>]) : integer
sc0_get_gpt0([<table>]) : integer
sc1_get_gpt0([<table>]) : integer
sc2_get_gpt0([<table>]) : integer
  Returns the value of the first General Purpose Tag associated to the
  currently tracked counters. See also "table_gpt0".

sc_glitch_cnt(<ctr>[,<table>]) : integer
sc0_glitch_cnt([<table>]) : integer
sc1_glitch_cnt([<table>]) : integer
sc2_glitch_cnt([<table>]) : integer
  Returns the cumulative number of front connection glitches that were observed
  on connections associated with the currently tracked counters. Usually these
  result in requests or connections to be aborted so the returned value will
  often correspond to past connections. There is no good nor bad value, but a
  poor quality client may occasionally cause a few glitches per connection,
  while a very bogus or malevolent client may quickly cause thousands of events
  to be added on a connection. See also fc_glitches for the number affecting
  the current connection, src_glitch_cnt to look them up per source, and
  sc_glitch_rate for the event rate measurements.

sc_glitch_rate(<ctr>[,<table>]) : integer
sc0_glitch_rate([<table>]) : integer
sc1_glitch_rate([<table>]) : integer
sc2_glitch_rate([<table>]) : integer
  Returns the average rate at which front connection glitches were observed for
  the currently tracked counters, measured in amount of events over the period
  configured in the table. Usually these glitches result in requests or
  connections to be aborted so the returned value will often be related to past
  connections. There is no good nor bad value, but a poor quality client may
  occasionally cause a few glitches per connection, hence a low rate is
  generally expected. However, a very bogus or malevolent client may quickly
  cause thousands of events to be added per connection, and maintain a high
  rate here. See also "table_glitch_rate" and "sc_glitch_cnt".

sc_gpc_rate(<idx>,<ctr>[,<table>]) : integer
  Returns the average increment rate of the General Purpose Counter at the
  index <idx> of the array associated to the tracked counter of ID <ctr> from
  the current proxy's table or from the designated stick-table <table>.
  It reports the frequency which the gpc counter was incremented over the
  configured period. <idx> is an integer between 0 and 99 and <ctr> an integer
  between 0 and 2.
  Note that the 'gpc_rate' counter array  must be stored in the stick-table
  for a value to be returned, as 'gpc' only holds the event count.
  This fetch applies only to the 'gpc_rate' array data_type (and not to
  the legacy 'gpc0_rate' nor 'gpc1_rate' data_types).
  See also "table_gpc_rate", "sc_get_gpc", and "sc_inc_gpc".

sc_gpc0_rate(<ctr>[,<table>]) : integer
sc0_gpc0_rate([<table>]) : integer
sc1_gpc0_rate([<table>]) : integer
sc2_gpc0_rate([<table>]) : integer
  Returns the average increment rate of the first General Purpose Counter
  associated to the currently tracked counters. It reports the frequency
  which the gpc0 counter was incremented over the configured period. See also
  src_gpc0_rate, sc/sc0/sc1/sc2_get_gpc0, and sc/sc0/sc1/sc2_inc_gpc0. Note
  that the "gpc0_rate" counter must be stored in the stick-table for a value to
  be returned, as "gpc0" only holds the event count.

sc_gpc1_rate(<ctr>[,<table>]) : integer
sc0_gpc1_rate([<table>]) : integer
sc1_gpc1_rate([<table>]) : integer
sc2_gpc1_rate([<table>]) : integer
  Returns the average increment rate of the second General Purpose Counter
  associated to the currently tracked counters. It reports the frequency
  which the gpc1 counter was incremented over the configured period. See also
  src_gpcA_rate, sc/sc0/sc1/sc2_get_gpc1, and sc/sc0/sc1/sc2_inc_gpc1. Note
  that the "gpc1_rate" counter must be stored in the stick-table for a value to
  be returned, as "gpc1" only holds the event count.

sc_http_err_cnt(<ctr>[,<table>]) : integer
sc0_http_err_cnt([<table>]) : integer
sc1_http_err_cnt([<table>]) : integer
sc2_http_err_cnt([<table>]) : integer
  Returns the cumulative number of HTTP errors from the currently tracked
  counters. This includes the both request errors and 4xx error responses.
  See also "table_http_err_cnt".

sc_http_err_rate(<ctr>[,<table>]) : integer
sc0_http_err_rate([<table>]) : integer
sc1_http_err_rate([<table>]) : integer
sc2_http_err_rate([<table>]) : integer
  Returns the average rate of HTTP errors from the currently tracked counters,
  measured in amount of errors over the period configured in the table. This
  includes the both request errors and 4xx error responses. See also
  src_http_err_rate.

sc_http_fail_cnt(<ctr>[,<table>]) : integer
sc0_http_fail_cnt([<table>]) : integer
sc1_http_fail_cnt([<table>]) : integer
sc2_http_fail_cnt([<table>]) : integer
  Returns the cumulative number of HTTP response failures from the currently
  tracked counters. This includes the both response errors and 5xx status codes
  other than 501 and 505. See also "table_http_fail_cnt".

sc_http_fail_rate(<ctr>[,<table>]) : integer
sc0_http_fail_rate([<table>]) : integer
sc1_http_fail_rate([<table>]) : integer
sc2_http_fail_rate([<table>]) : integer
  Returns the average rate of HTTP response failures from the currently tracked
  counters, measured in amount of failures over the period configured in the
  table. This includes the both response errors and 5xx status codes other than
  501 and 505. See also "table_http_fail_rate".

sc_http_req_cnt(<ctr>[,<table>]) : integer
sc0_http_req_cnt([<table>]) : integer
sc1_http_req_cnt([<table>]) : integer
sc2_http_req_cnt([<table>]) : integer
  Returns the cumulative number of HTTP requests from the currently tracked
  counters. This includes every started request, valid or not. See also
  src_http_req_cnt.

sc_http_req_rate(<ctr>[,<table>]) : integer
sc0_http_req_rate([<table>]) : integer
sc1_http_req_rate([<table>]) : integer
sc2_http_req_rate([<table>]) : integer
  Returns the average rate of HTTP requests from the currently tracked
  counters, measured in amount of requests over the period configured in
  the table. This includes every started request, valid or not. See also
  src_http_req_rate.

sc_inc_gpc(<idx>,<ctr>[,<table>]) : integer
  Increments the General Purpose Counter at the index <idx> of the array
  associated to the designated tracked counter of ID <ctr> from current
  proxy's stick table or from the designated stick-table <table>, and
  returns its new value. <idx> is an integer between 0 and 99 and
  <ctr> an integer between 0 and 2.
  Before the first invocation, the stored value is zero, so first invocation
  will increase it to 1 and will return 1.
  This fetch applies only to the 'gpc' array data_type (and not to the legacy
  'gpc0' nor 'gpc1' data_types).

sc_inc_gpc0(<ctr>[,<table>]) : integer
sc0_inc_gpc0([<table>]) : integer
sc1_inc_gpc0([<table>]) : integer
sc2_inc_gpc0([<table>]) : integer
  Increments the first General Purpose Counter associated to the currently
  tracked counters, and returns its new value. Before the first invocation,
  the stored value is zero, so first invocation will increase it to 1 and will
  return 1. This is typically used as a second ACL in an expression in order
  to mark a connection when a first ACL was verified :

  Example:
        acl abuse sc0_http_req_rate gt 10
        acl kill  sc0_inc_gpc0 gt 0
        tcp-request connection reject if abuse kill

sc_inc_gpc1(<ctr>[,<table>]) : integer
sc0_inc_gpc1([<table>]) : integer
sc1_inc_gpc1([<table>]) : integer
sc2_inc_gpc1([<table>]) : integer
  Increments the second General Purpose Counter associated to the currently
  tracked counters, and returns its new value. Before the first invocation,
  the stored value is zero, so first invocation will increase it to 1 and will
  return 1. This is typically used as a second ACL in an expression in order
  to mark a connection when a first ACL was verified.

sc_kbytes_in(<ctr>[,<table>]) : integer
sc0_kbytes_in([<table>]) : integer
sc1_kbytes_in([<table>]) : integer
sc2_kbytes_in([<table>]) : integer
  Returns the total amount of client-to-server data from the currently tracked
  counters, measured in kilobytes. The test is currently performed on 32-bit
  integers, which limits values to 4 terabytes. See also "table_kbytes_in".

sc_kbytes_out(<ctr>[,<table>]) : integer
sc0_kbytes_out([<table>]) : integer
sc1_kbytes_out([<table>]) : integer
sc2_kbytes_out([<table>]) : integer
  Returns the total amount of server-to-client data from the currently tracked
  counters, measured in kilobytes. The test is currently performed on 32-bit
  integers, which limits values to 4 terabytes. See also "table_kbytes_out".

sc_key(<ctr>) : any
sc0_key : any
sc1_key : any
sc2_key : any
  Returns the key used to match the currently tracked counter.

sc_sess_cnt(<ctr>[,<table>]) : integer
sc0_sess_cnt([<table>]) : integer
sc1_sess_cnt([<table>]) : integer
sc2_sess_cnt([<table>]) : integer
  Returns the cumulative number of incoming connections that were transformed
  into sessions, which means that they were accepted by a "tcp-request
  connection" rule, from the currently tracked counters. A backend may count
  more sessions than connections because each connection could result in many
  backend sessions if some HTTP keep-alive is performed over the connection
  with the client. See also "table_sess_cnt".

sc_sess_rate(<ctr>[,<table>]) : integer
sc0_sess_rate([<table>]) : integer
sc1_sess_rate([<table>]) : integer
sc2_sess_rate([<table>]) : integer
  Returns the average session rate from the currently tracked counters,
  measured in amount of sessions over the period configured in the table. A
  session is a connection that got past the early "tcp-request connection"
  rules. A backend may count more sessions than connections because each
  connection could result in many backend sessions if some HTTP keep-alive is
  performed over the connection with the client. See also "table_sess_rate".

sc_tracked(<ctr>[,<table>]) : boolean
sc0_tracked([<table>]) : boolean
sc1_tracked([<table>]) : boolean
sc2_tracked([<table>]) : boolean
  Returns true if the designated session counter is currently being tracked by
  the current session. This can be useful when deciding whether or not we want
  to set some values in a header passed to the server.

sc_trackers(<ctr>[,<table>]) : integer
sc0_trackers([<table>]) : integer
sc1_trackers([<table>]) : integer
sc2_trackers([<table>]) : integer
  Returns the current amount of concurrent connections tracking the same
  tracked counters. This number is automatically incremented when tracking
  begins and decremented when tracking stops. It differs from sc0_conn_cur in
  that it does not rely on any stored information but on the table's reference
  count (the "use" value which is returned by "show table" on the CLI). This
  may sometimes be more suited for layer7 tracking. It can be used to tell a
  server how many concurrent connections there are from a given address for
  example.

so_id : integer
  Returns an integer containing the current listening socket's id. It is useful
  in frontends involving many "bind" lines, or to stick all users coming via a
  same socket to the same server.

so_name : string
  Returns a string containing the current listening socket's name, as defined
  with name on a "bind" line. It can serve the same purposes as so_id but with
  strings instead of integers.

src : ip
  This is the source IP address of the client of the session. Any tcp/http
  rules may alter this address. It is of type IP and works on both IPv4 and
  IPv6 tables. On IPv6 tables, IPv4 addresses are mapped to their IPv6
  equivalent, according to RFC 4291. Note that it is the TCP-level source
  address which is used, and not the address of a client behind a
  proxy. However if the "accept-proxy" or "accept-netscaler-cip" bind directive
  is used, it can be the address of a client behind another PROXY-protocol
  compatible component for all rule sets except "tcp-request connection" which
  sees the real address. When the incoming connection passed through address
  translation or redirection involving connection tracking, the original
  destination address before the redirection will be reported. On Linux
  systems, the source and destination may seldom appear reversed if the
  nf_conntrack_tcp_loose sysctl is set, because a late response may reopen a
  timed out connection and switch what is believed to be the source and the
  destination.

  Example:
       # add an HTTP header in requests with the originating address' country
       http-request set-header X-Country %[src,map_ip(geoip.lst)]

src_bytes_in_rate([<table>]) : integer
  Same as "table_bytes_in_rate" converter with key set to the incoming
  connection's source address.

  Equivalent to: src,table_bytes_in_rate([<table>])

src_bytes_out_rate([<table>]) : integer
  Same as "table_bytes_out_rate" converter with key set to the incoming
  connection's source address.

  Equivalent to: src,table_bytes_out_rate([<table>])

src_clr_gpc(<idx>[,<table>]) : integer
  Same as "table_clr_gpc" converter with key set to the incoming
  connection's source address.

  Equivalent to: src,table_clr_gpc(<idx>[,<table>])

src_clr_gpc0([<table>]) : integer
  Same as "table_clr_gpc0" converter with key set to the incoming
  connection's source address.

  Equivalent to: src,table_clr_gpc0([<table>])

src_clr_gpc1([<table>]) : integer
  Same as "table_clr_gpc1" converter with key set to the incoming
  connection's source address.

  Equivalent to: src,table_clr_gpc1([<table>])

src_conn_cnt([<table>]) : integer
  Same as "table_conn_cnt" converter with key set to the incoming
  connection's source address.

  Equivalent to: src,table_conn_cnt([<table>])

src_conn_cur([<table>]) : integer
  Same as "table_conn_cur" converter with key set to the incoming
  connection's source address.

  Equivalent to: src,table_conn_cur([<table>])

src_conn_rate([<table>]) : integer
  Same as "table_conn_rate" converter with key set to the incoming
  connection's source address.

  Equivalent to: src,table_conn_rate([<table>])

src_get_gpc(<idx>[,<table>]) : integer
  Same as "table_gpc" converter with key set to the incoming connection's
  source address.

  Equivalent to: src,table_gpc(<idx>[,<table>])

src_get_gpc0([<table>]) : integer
  Same as "table_gpc0" converter with key set to the incoming connection's
  source address.

  Equivalent to: src,table_gpc0([<table>])

src_get_gpc1([<table>]) : integer
  Same as "table_gpc1" converter with key set to the incoming connection's
  source address.

  Equivalent to: src,table_gpc1([<table>])

src_get_gpt(<idx>[,<table>]) : integer
  Same as "table_gpt" converter with key set to the incoming connection's
  source address.

  Equivalent to: src,table_gpt(<idx>[,<table>])

src_get_gpt0([<table>]) : integer
  Same as "table_gpt0" converter with key set to the incoming connection's
  source address.

  Equivalent to: src,table_gpt0([<table>])

src_glitch_cnt([<table>]) : integer
  Same as "table_glitch_cnt" converter with key set to the incoming
  connection's source address.

  Equivalent to: src,table_glitch_cnt([<table>])

src_glitch_rate([<table>]) : integer
  Same as "table_glitch_rate" converter with key set to the incoming
  connection's source address.

  Equivalent to: src,table_glitch_rate([<table>])

src_gpc_rate(<idx>[,<table>]) : integer
  Same as "table_gpc_rate" converter with key set to the incoming connection's
  source address.

  Equivalent to: src,table_gpc_rate(<idx>[,<table>])

src_gpc0_rate([<table>]) : integer
  Same as "table_gpc0_rate" converter with key set to the incoming connection's
  source address.

  Equivalent to: src,table_gpc0_rate([<table>])

src_gpc1_rate([<table>]) : integer
  Same as "table_gpc1_rate" converter with key set to the incoming connection's
  source address.

  Equivalent to: src,table_gpc1_rate([<table>])

src_http_err_cnt([<table>]) : integer
  Same as "table_http_err_cnt" converter with key set to the incoming
  connection's source address.

  Equivalent to: src,table_http_err_cnt([<table>])

src_http_err_rate([<table>]) : integer
  Same as "table_http_err_rate" converter with key set to the incoming
  connection's source address.

  Equivalent to: src,table_http_err_rate([<table>])

src_http_fail_cnt([<table>]) : integer
  Same as "table_http_fail_cnt" converter with key set to the incoming
  connection's source address.

  Equivalent to: src,table_http_fail_cnt([<table>])

src_http_fail_rate([<table>]) : integer
  Same as "table_http_fail_rate" converter with key set to the incoming
  connection's source address.

  Equivalent to: src,table_http_fail_rate([<table>])

src_http_req_cnt([<table>]) : integer
  Same as "table_http_req_cnt" converter with key set to the incoming
  connection's source address.

  Equivalent to: src,table_http_req_cnt([<table>])

src_http_req_rate([<table>]) : integer
  Same as "table_http_req_rate" converter with key set to the incoming
  connection's source address.

  Equivalent to: src,table_http_req_rate([<table>])

src_inc_gpc(<idx>[,<table>]) : integer
  Same as "src_inc_gpc" converter with key set to the incoming
  connection's source address.

  Equivalent to: src,table_inc_gpc(<idx>[,<table>])

src_inc_gpc0([<table>]) : integer
  Same as "src_inc_gpc0" converter with key set to the incoming
  connection's source address.

  Equivalent to: src,table_inc_gpc0([<table>])

src_inc_gpc1([<table>]) : integer
  Same as "src_inc_gpc1" converter with key set to the incoming
  connection's source address.

  Equivalent to: src,table_inc_gpc1([<table>])

src_is_local : boolean
  Returns true if the source address of the incoming connection is local to the
  system, or false if the address doesn't exist on the system, meaning that it
  comes from a remote machine. Note that UNIX addresses are considered local.
  It can be useful to apply certain access restrictions based on where the
  client comes from (e.g. require auth or https for remote machines). Please
  note that the check involves a few system calls, so it's better to do it only
  once per connection.

src_kbytes_in([<table>]) : integer
  Same as "table_kbytes_in" converter with key set to the incoming connection's
  source address.

  Equivalent to: src,table_kbytes_in([<table>])

src_kbytes_out([<table>]) : integer
  Same as "table_kbytes_out" converter with key set to the incoming connection's
  source address.

  Equivalent to: src,table_kbytes_out([<table>])

src_port : integer
  Returns an integer value corresponding to the TCP source port of the
  connection on the client side, which is the port the client connected
  from. Any tcp/http rules may alter this address. Usage of this function is
  very limited as modern protocols do not care much about source ports
  nowadays.

src_sess_cnt([<table>]) : integer
  Same as "table_sess_cnt" converter with key set to the incoming connection's
  source address.

  Equivalent to: src,table_sess_cnt([<table>])

src_sess_rate([<table>]) : integer
  Same as "table_sess_rate" converter with key set to the incoming connection's
  source address.

  Equivalent to: src,table_sess_rate([<table>])

src_updt_conn_cnt([<table>]) : integer
  Creates or updates the entry associated to the incoming connection's source
  address in the current proxy's stick-table or in the designated stick-table.
  This table must be configured to store the "conn_cnt" data type, otherwise
  the match will be ignored. The current count is incremented by one, and the
  expiration timer refreshed. The updated count is returned, so this match
  can't return zero. This was used to reject service abusers based on their
  source address. Note: it is recommended to use the more complete "track-sc*"
  actions in "tcp-request" rules instead.

  Example :
        # This frontend limits incoming SSH connections to 3 per 10 second for
        # each source address, and rejects excess connections until a 10 second
        # silence is observed. At most 20 addresses are tracked.
        listen ssh
            bind :22
            mode tcp
            maxconn 100
            stick-table type ip size 20 expire 10s store conn_cnt
            tcp-request content reject if { src_updt_conn_cnt gt 3 }
            server local 127.0.0.1:22

srv_id : integer
  Returns an integer containing the server's id when processing the response.
  While it's almost only used with ACLs, it may be used for logging or
  debugging. It can also be used in a tcp-check or an http-check ruleset.

srv_name : string
  Returns a string containing the server's name when processing the response.
  While it's almost only used with ACLs, it may be used for logging or
  debugging. It can also be used in a tcp-check or an http-check ruleset.

txn.conn_retries : integer
  Returns the the number of connection retries experienced by this stream when
  trying to connect to the server. This value is subject to change while the
  connection is not fully established. For HTTP connections, the value may be
  affected by L7 retries.

txn.redispatched : boolean
  Returns true if the connection has experienced redispatch upon retry according
  to "option redispatch" configuration. This value is subject to change while
  the connection is not fully established. For HTTP connections, the value may
  be affected by L7 retries.


7.3.4. Fetching samples at Layer 5
----------------------------------

The layer 5 usually describes just the session layer which in HAProxy is
closest to the session once all the connection handshakes are finished, but
when no content is yet made available. The fetch methods described here are
usable as low as the "tcp-request content" rule sets unless they require some
future information. Those generally include the results of SSL negotiations.

Summary of sample fetch methods in this section and their respective types:

  keyword                                          output type
-------------------------------------------------+-------------
51d.all(<prop>[,<prop>*])                          string
bs.aborted                                         boolean
bs.debug_str([<bitmap>])                           string
bs.id                                              integer
bs.rst_code                                        integer
fs.aborted                                         boolean
fs.debug_str([<bitmap>])                           string
fs.id                                              integer
fs.rst_code                                        integer
ssl_bc                                             boolean
ssl_bc_alg_keysize                                 integer
ssl_bc_alpn                                        string
ssl_bc_cipher                                      string
ssl_bc_client_early_traffic_secret                 string
ssl_bc_client_handshake_traffic_secret             string
ssl_bc_client_random                               binary
ssl_bc_client_traffic_secret_0                     string
ssl_bc_curve                                       string
ssl_bc_early_exporter_secret                       string
ssl_bc_err                                         integer
ssl_bc_err_str                                     string
ssl_bc_exporter_secret                             string
ssl_bc_is_resumed                                  boolean
ssl_bc_npn                                         string
ssl_bc_protocol                                    string
ssl_bc_server_handshake_traffic_secret             string
ssl_bc_server_random                               binary
ssl_bc_server_traffic_secret_0                     string
ssl_bc_session_id                                  binary
ssl_bc_session_key                                 binary
ssl_bc_sni                                         string
ssl_bc_unique_id                                   binary
ssl_bc_use_keysize                                 integer
ssl_c_ca_err                                       integer
ssl_c_ca_err_depth                                 integer
ssl_c_chain_der                                    binary
ssl_c_der                                          binary
ssl_c_err                                          integer
ssl_c_i_dn([<entry>[,<occ>[,<format>]]])           string
ssl_c_key_alg                                      string
ssl_c_notafter                                     string
ssl_c_notbefore                                    string
ssl_c_r_dn([<entry>[,<occ>[,<format>]]])           string
ssl_c_s_dn([<entry>[,<occ>[,<format>]]])           string
ssl_c_san                                          string
ssl_c_serial                                       binary
ssl_c_sha1                                         binary
ssl_c_sig_alg                                      string
ssl_c_used                                         boolean
ssl_c_verify                                       integer
ssl_c_version                                      integer
ssl_f_der                                          binary
ssl_f_i_dn([<entry>[,<occ>[,<format>]]])           string
ssl_f_key_alg                                      string
ssl_f_notafter                                     string
ssl_f_notbefore                                    string
ssl_f_s_dn([<entry>[,<occ>[,<format>]]])           string
ssl_f_serial                                       binary
ssl_f_sha1                                         binary
ssl_f_sig_alg                                      string
ssl_f_version                                      integer
ssl_fc                                             boolean
ssl_fc_alg_keysize                                 integer
ssl_fc_alpn                                        string
ssl_fc_cipher                                      string
ssl_fc_cipherlist_bin([<filter_option>])           binary
ssl_fc_cipherlist_hex([<filter_option>])           string
ssl_fc_cipherlist_str([<filter_option>])           string
ssl_fc_cipherlist_xxh                              integer
ssl_fc_client_early_traffic_secret                 string
ssl_fc_client_handshake_traffic_secret             string
ssl_fc_client_random                               binary
ssl_fc_client_traffic_secret_0                     string
ssl_fc_curve                                       string
ssl_fc_early_exporter_secret                       string
ssl_fc_ecformats_bin                               binary
ssl_fc_eclist_bin([<filter_option>])               binary
ssl_fc_err                                         integer
ssl_fc_err_str                                     string
ssl_fc_exporter_secret                             string
ssl_fc_extlist_bin([<filter_option>])              binary
ssl_fc_has_crt                                     boolean
ssl_fc_has_early                                   boolean
ssl_fc_has_sni                                     boolean
ssl_fc_is_resumed                                  boolean
ssl_fc_npn                                         string
ssl_fc_protocol                                    string
ssl_fc_protocol_hello_id                           integer
ssl_fc_server_handshake_traffic_secret             string
ssl_fc_server_random                               binary
ssl_fc_server_traffic_secret_0                     string
ssl_fc_session_id                                  binary
ssl_fc_session_key                                 binary
ssl_fc_sigalgs_bin([<filter_option>])              binary
ssl_fc_sni                                         string
ssl_fc_supported_versions_bin([<filter_option>])   binary
ssl_fc_unique_id                                   binary
ssl_fc_use_keysize                                 integer
ssl_s_chain_der                                    binary
ssl_s_der                                          binary
ssl_s_i_dn([<entry>[,<occ>[,<format>]]])           string
ssl_s_key_alg                                      string
ssl_s_notafter                                     string
ssl_s_notbefore                                    string
ssl_s_s_dn([<entry>[,<occ>[,<format>]]])           string
ssl_s_serial                                       binary
ssl_s_sha1                                         binary
ssl_s_sig_alg                                      string
ssl_s_version                                      integer
txn.timer.user                                     integer
-------------------------------------------------+-------------

Detailed list:

51d.all(<prop>[,<prop>*]) : string
  Returns values for the properties requested as a string, where values are
  separated by the delimiter specified with "51degrees-property-separator".
  The device is identified using all the important HTTP headers from the
  request. The function can be passed up to five property names, and if a
  property name can't be found, the value "NoData" is returned.

  Example :
    # Here the header "X-51D-DeviceTypeMobileTablet" is added to the request
    # containing the three properties requested using all relevant headers from
    # the request.
    frontend http-in
      bind *:8081
      default_backend servers
      http-request set-header X-51D-DeviceTypeMobileTablet \
        %[51d.all(DeviceType,IsMobile,IsTablet)]

bs.aborted : boolean
  Returns true is an abort was received from the server for the current
  stream. Otherwise false is returned.

bs.debug_str([<bitmap>]) : string
  This function is meant to be used by developers during certain complex
  troubleshooting sessions. It extracts some internal states from the lower
  layers of the backend stream and connection, and arranges them as a string,
  generally in the form of a series of "name=value" delimited with spaces. The
  <bitmap> optional argument indicates what layer(s) to extract information
  from, and is an arithmetic OR (or a sum) of the following values:
     - socket layer: 16
     - connection layer: 8
     - transport layer (e.g. SSL): 4
     - mux connection: 2
     - mux stream: 1

  These values might change across versions. The default value of zero is
  special and enables all layers. Please do not rely on the output of this
  function for long-term production monitoring. It is meant to evolve even
  within a stable branch, as the needs for increased details arise. One use
  typical use case is to concatenate these information at the very end of a
  log-format, along with fs.debug_str(). Example:

     log-format "$HAPROXY_HTTP_LOG_FMT fs=<%[fs.debug_str]> bs=<%[bs.debug_str]>"

bs.id : integer
  Returns the multiplexer's stream ID on the server side. It is the
  multiplexer's responsibility to return the appropriate information.

bs.rst_code : integer
  Returns the reset code received from the server for the current stream. The
  code of the H2 RST_STREAM frame or the QUIC STOP_SENDING frame received from
  the server is returned. The sample fetch fails if no abort was received or if
  the server stream is not an H2/QUIC stream.

fs.aborted : boolean
  Returns true is an abort was received from the client for the current
  stream. Otherwise false is returned.

fs.debug_str([<bitmap>]) : string
  This function is meant to be used by developers during certain complex
  troubleshooting sessions. It extracts some internal states from the lower
  layers of the frontend stream and connection, and arranges them as a string,
  generally in the form of a series of "name=value" delimited with spaces. The
  <bitmap> optional argument indicates what layer(s) to extract information
  from, and is an arithmetic OR (or a sum) of the following values:
     - socket layer: 16
     - connection layer: 8
     - transport layer (e.g. SSL): 4
     - mux connection: 2
     - mux stream: 1

  These values might change across versions. The default value of zero is
  special and enables all layers. Please do not rely on the output of this
  function for long-term production monitoring. It is meant to evolve even
  within a stable branch, as the needs for increased details arise. One use
  typical use case is to concatenate these information at the very end of a
  log-format, along with bs.debug_str(). Example:

     log-format "$HAPROXY_HTTP_LOG_FMT fs=<%[fs.debug_str]> bs=<%[bs.debug_str]>"

fs.id : integer
  Returns the multiplexer's stream ID on the client side. It is the
  multiplexer's responsibility to return the appropriate information. For
  instance, on a raw TCP, 0 is always returned because there is no stream.

fs.rst_code : integer
  Returns the reset code received from the client for the current stream. The
  code of the H2 RST_STREAM frame or the QUIC STOP_SENDING frame received from
  the client is returned. The sample fetch fails if no abort was received or
  if the client stream is not an H2/QUIC stream.

ssl_bc : boolean
  Returns true when the back connection was made via an SSL/TLS transport
  layer and is locally deciphered. This means the outgoing connection was made
  to a server with the "ssl" option. It can be used in a tcp-check or an
  http-check ruleset.

ssl_bc_alg_keysize : integer
  Returns the symmetric cipher key size supported in bits when the outgoing
  connection was made over an SSL/TLS transport layer. It can be used in a
  tcp-check or an http-check ruleset.

ssl_bc_alpn : string
  This extracts the Application Layer Protocol Negotiation field from an
  outgoing connection made via a TLS transport layer.
  The result is a string containing the protocol name negotiated with the
  server. The SSL library must have been built with support for TLS
  extensions enabled (check haproxy -vv). Note that the TLS ALPN extension is
  not advertised unless the "alpn" keyword on the "server" line specifies a
  protocol list. Also, nothing forces the server to pick a protocol from this
  list, any other one may be requested. The TLS ALPN extension is meant to
  replace the TLS NPN extension. See also "ssl_bc_npn". It can be used in a
  tcp-check or an http-check ruleset.

ssl_bc_cipher : string
  Returns the name of the used cipher when the outgoing connection was made
  over an SSL/TLS transport layer. It can be used in a tcp-check or an
  http-check ruleset.

ssl_bc_client_early_traffic_secret : string
  Return the CLIENT_EARLY_TRAFFIC_SECRET as an hexadecimal string for the
  back connection when the outgoing connection was made over a TLS 1.3
  transport layer.
  Require OpenSSL >= 1.1.1. This is one of the keys dumped by the OpenSSL
  keylog callback to generate the SSLKEYLOGFILE. The SSL Key logging must be
  activated with "tune.ssl.keylog on" in the global section. See also
  "tune.ssl.keylog"

ssl_bc_client_handshake_traffic_secret : string
  Return the CLIENT_HANDSHAKE_TRAFFIC_SECRET as an hexadecimal string for the
  bacl connection when the outgoing connection was made over a TLS 1.3
  transport layer.
  Require OpenSSL >= 1.1.1. This is one of the keys dumped by the OpenSSL
  keylog callback to generate the SSLKEYLOGFILE. The SSL Key logging must be
  activated with "tune.ssl.keylog on" in the global section. See also
  "tune.ssl.keylog"

ssl_bc_client_random : binary
  Returns the client random of the back connection when the incoming connection
  was made over an SSL/TLS transport layer. It is useful to to decrypt traffic
  sent using ephemeral ciphers. This requires OpenSSL >= 1.1.0, or BoringSSL.
  It can be used in a tcp-check or an http-check ruleset.

ssl_bc_client_traffic_secret_0 : string
  Return the CLIENT_TRAFFIC_SECRET_0 as an hexadecimal string for the
  back connection when the outgoing connection was made over a TLS 1.3
  transport layer.
  Require OpenSSL >= 1.1.1. This is one of the keys dumped by the OpenSSL
  keylog callback to generate the SSLKEYLOGFILE. The SSL Key logging must be
  activated with "tune.ssl.keylog on" in the global section. See also
  "tune.ssl.keylog"

ssl_bc_curve : string
  Returns the name of the curve used in the key agreement when the outgoing
  connection was made over an SSL/TLS transport layer. This requires
  OpenSSL >= 3.0.0 or AWS-LC >= 1.57.0.

ssl_bc_early_exporter_secret : string
  Return the EARLY_EXPORTER_SECRET as an hexadecimal string for the
  back connection when the outgoing connection was made over an TLS 1.3
  transport layer.
  Require OpenSSL >= 1.1.1. This is one of the keys dumped by the OpenSSL
  keylog callback to generate the SSLKEYLOGFILE. The SSL Key logging must be
  activated with "tune.ssl.keylog on" in the global section. See also
  "tune.ssl.keylog"

ssl_bc_err : integer
  When the outgoing connection was made over an SSL/TLS transport layer,
  returns the ID of the last error of the first error stack raised on the
  backend side. It can raise handshake errors as well as other read or write
  errors occurring during the connection's lifetime. In order to get a text
  description of this error code, you can either use the "ssl_bc_err_str"
  sample fetch or use the "openssl errstr" command (which takes an error code
  in hexadecimal representation as parameter). Please refer to your SSL
  library's documentation to find the exhaustive list of error codes.

ssl_bc_err_str : string
  When the outgoing connection was made over an SSL/TLS transport layer,
  returns a string representation of the last error of the first error stack
  that was raised on the connection from the backend's perspective. See also
  "ssl_fc_err".

ssl_bc_exporter_secret : string
  Return the EXPORTER_SECRET as an hexadecimal string for the
  back connection when the outgoing connection was made over a TLS 1.3
  transport layer.
  Require OpenSSL >= 1.1.1. This is one of the keys dumped by the OpenSSL
  keylog callback to generate the SSLKEYLOGFILE. The SSL Key logging must be
  activated with "tune.ssl.keylog on" in the global section. See also
  "tune.ssl.keylog"

ssl_bc_is_resumed : boolean
  Returns true when the back connection was made over an SSL/TLS transport
  layer and the newly created SSL session was resumed using a cached
  session or a TLS ticket. It can be used in a tcp-check or an http-check
  ruleset.

ssl_bc_npn : string
  This extracts the Next Protocol Negotiation field from an outgoing connection
  made via a TLS transport layer. The result is a string containing the
  protocol name negotiated with the server . The SSL library must have been
  built with support for TLS extensions enabled (check haproxy -vv). Note that
  the TLS NPN extension is not advertised unless the "npn" keyword on the
  "server" line specifies a protocol list. Also, nothing forces the server to
  pick a protocol from this list, any other one may be used. Please note that
  the TLS NPN extension was replaced with ALPN. It can be used in a tcp-check
  or an http-check ruleset.

ssl_bc_protocol : string
  Returns the name of the used protocol when the outgoing connection was made
  over an SSL/TLS transport layer. It can be used in a tcp-check or an
  http-check ruleset.

ssl_bc_server_handshake_traffic_secret : string
  Return the SERVER_HANDSHAKE_TRAFFIC_SECRET as an hexadecimal string for the
  back connection when the outgoing connection was made over a TLS 1.3
  transport layer.
  Require OpenSSL >= 1.1.1. This is one of the keys dumped by the OpenSSL
  keylog callback to generate the SSLKEYLOGFILE. The SSL Key logging must be
  activated with "tune.ssl.keylog on" in the global section. See also
  "tune.ssl.keylog"

ssl_bc_server_random : binary
  Returns the server random of the back connection when the incoming connection
  was made over an SSL/TLS transport layer. It is useful to to decrypt traffic
  sent using ephemeral ciphers. This requires OpenSSL >= 1.1.0, or BoringSSL.
  It can be used in a tcp-check or an http-check ruleset.

ssl_bc_server_traffic_secret_0 : string
  Return the SERVER_TRAFFIC_SECRET_0 as an hexadecimal string for the
  back connection when the outgoing connection was made over an TLS 1.3
  transport layer.
  Require OpenSSL >= 1.1.1. This is one of the keys dumped by the OpenSSL
  keylog callback to generate the SSLKEYLOGFILE. The SSL Key logging must be
  activated with "tune.ssl.keylog on" in the global section. See also
  "tune.ssl.keylog"

ssl_bc_session_id : binary
  Returns the SSL ID of the back connection when the outgoing connection was
  made over an SSL/TLS transport layer. It is useful to log if we want to know
  if session was reused or not. It can be used in a tcp-check or an http-check
  ruleset.

ssl_bc_session_key : binary
  Returns the SSL session master key of the back connection when the outgoing
  connection was made over an SSL/TLS transport layer. It is useful to decrypt
  traffic sent using ephemeral ciphers. This requires OpenSSL >= 1.1.0, or
  BoringSSL. It can be used in a tcp-check or an http-check ruleset.

ssl_bc_sni : string
  This retrieves the Server Name Indication TLS extension (SNI) field that was
  used on the connection to the server. The result (when present) typically is
  a string matching the HTTPS host name (253 chars or less). The main use case
  is for logging and debugging purposes (e.g. figure what SNI was used when the
  connection was established to match it against what the server has seen).

ssl_bc_unique_id : binary
  When the outgoing connection was made over an SSL/TLS transport layer,
  returns the TLS unique ID as defined in RFC5929 section 3. The unique id
  can be encoded to base64 using the converter: "ssl_bc_unique_id,base64". It
  can be used in a tcp-check or an http-check ruleset.

ssl_bc_use_keysize : integer
  Returns the symmetric cipher key size used in bits when the outgoing
  connection was made over an SSL/TLS transport layer. It can be used in a
  tcp-check or an http-check ruleset.

ssl_c_ca_err : integer
  When the incoming connection was made over an SSL/TLS transport layer,
  returns the ID of the first error detected during verification of the client
  certificate at depth > 0, or 0 if no error was encountered during this
  verification process. Please refer to your SSL library's documentation to
  find the exhaustive list of error codes.

ssl_c_ca_err_depth : integer
  When the incoming connection was made over an SSL/TLS transport layer,
  returns the depth in the CA chain of the first error detected during the
  verification of the client certificate. If no error is encountered, 0 is
  returned.

ssl_c_chain_der : binary
  Returns the DER formatted chain certificate presented by the client when the
  incoming connection was made over an SSL/TLS transport layer. When used for
  an ACL, the value(s) to match against can be passed in hexadecimal form. One
  can parse the result with any lib accepting ASN.1 DER data. It currently
  does not support resumed sessions.

ssl_c_der : binary
  Returns the DER formatted certificate presented by the client when the
  incoming connection was made over an SSL/TLS transport layer. When used for
  an ACL, the value(s) to match against can be passed in hexadecimal form.

ssl_c_err : integer
  When the incoming connection was made over an SSL/TLS transport layer,
  returns the ID of the first error detected during verification at depth 0, or
  0 if no error was encountered during this verification process. Please refer
  to your SSL library's documentation to find the exhaustive list of error
  codes.

ssl_c_i_dn([<entry>[,<occ>[,<format>]]]) : string
  When the incoming connection was made over an SSL/TLS transport layer,
  returns the full distinguished name of the issuer of the certificate
  presented by the client when no <entry> is specified, or the value of the
  first given entry found from the beginning of the DN. If a positive/negative
  occurrence number is specified as the optional second argument, it returns
  the value of the nth given entry value from the beginning/end of the DN.
  For instance, "ssl_c_i_dn(OU,2)" the second organization unit, and
  "ssl_c_i_dn(CN)" retrieves the common name.
  The <format> parameter allows you to receive the DN suitable for
  consumption by different protocols. Currently supported is rfc2253 for
  LDAP v3.
  If you'd like to modify the format only you can specify an empty string
  and zero for the first two parameters. Example: ssl_c_i_dn(,0,rfc2253)

ssl_c_key_alg : string
  Returns the name of the algorithm used to generate the key of the certificate
  presented by the client when the incoming connection was made over an SSL/TLS
  transport layer.

ssl_c_notafter : string
  Returns the end date presented by the client as a formatted string
  YYMMDDhhmmss[Z] when the incoming connection was made over an SSL/TLS
  transport layer.

ssl_c_notbefore : string
  Returns the start date presented by the client as a formatted string
  YYMMDDhhmmss[Z] when the incoming connection was made over an SSL/TLS
  transport layer.

ssl_c_r_dn([<entry>[,<occ>[,<format>]]]) : string
  When the incoming connection was made over an SSL/TLS transport layer, and is
  successfully validated with the configured ca-file, returns the full
  distinguished name of the root CA of the certificate presented by the client
  when no <entry> is specified, or the value of the first given entry found from
  the beginning of the DN. If a positive/negative occurrence number is specified
  as the optional second argument, it returns the value of the nth given entry
  value from the beginning/end of the DN. For instance, "ssl_c_r_dn(OU,2)" the
  second organization unit, and "ssl_c_r_dn(CN)" retrieves the common name. The
  <format> parameter allows you to receive the DN suitable for consumption by
  different protocols. Currently supported is rfc2253 for LDAP v3. If you'd like
  to modify the format only you can specify an empty string and zero for the
  first two parameters. Example: ssl_c_r_dn(,0,rfc2253)

ssl_c_s_dn([<entry>[,<occ>[,<format>]]]) : string
  When the incoming connection was made over an SSL/TLS transport layer,
  returns the full distinguished name of the subject of the certificate
  presented by the client when no <entry> is specified, or the value of the
  first given entry found from the beginning of the DN. If a positive/negative
  occurrence number is specified as the optional second argument, it returns
  the value of the nth given entry value from the beginning/end of the DN.
  For instance, "ssl_c_s_dn(OU,2)" the second organization unit, and
  "ssl_c_s_dn(CN)" retrieves the common name.
  The <format> parameter allows you to receive the DN suitable for
  consumption by different protocols. Currently supported is rfc2253 for
  LDAP v3.
  If you'd like to modify the format only you can specify an empty string
  and zero for the first two parameters. Example: ssl_c_s_dn(,0,rfc2253)

ssl_c_san : string
  When the incoming connection was made over an SSL/TLS transport layer, and was
  provided with a client certificate. Returns a string of comma separated
  Subject Alt Name fields contained into the provided certificate.

  This can be used to inspect the client certificate.

  Example:

    acl is_valid_client_cert ssl_c_used && ! ssl_c_verify
    http-request set-header X-SSL-Client-SAN %[ssl_c_san] if is_valid_client_cert

  will results in:

    X-SSL-Client-SAN: IP Address:127.0.0.1, IP Address:127.0.0.2, IP Address:127.0.0.3, URI:http://docs.haproxy.org/2.7/, DNS:ca.tests.haproxy.com


ssl_c_serial : binary
  Returns the serial of the certificate presented by the client when the
  incoming connection was made over an SSL/TLS transport layer. When used for
  an ACL, the value(s) to match against can be passed in hexadecimal form.

ssl_c_sha1 : binary
  Returns the SHA-1 fingerprint of the certificate presented by the client when
  the incoming connection was made over an SSL/TLS transport layer. This can be
  used to stick a client to a server, or to pass this information to a server.
  Note that the output is binary, so if you want to pass that signature to the
  server, you need to encode it in hex or base64, such as in the example below:

  Example:
     http-request set-header X-SSL-Client-SHA1 %[ssl_c_sha1,hex]

ssl_c_sig_alg : string
  Returns the name of the algorithm used to sign the certificate presented by
  the client when the incoming connection was made over an SSL/TLS transport
  layer.

ssl_c_used : boolean
  Returns true if current SSL session uses a client certificate even if current
  connection uses SSL session resumption. See also "ssl_fc_has_crt".

ssl_c_verify : integer
  Returns the verify result error ID when the incoming connection was made over
  an SSL/TLS transport layer, otherwise zero if no error is encountered. Please
  refer to your SSL library's documentation for an exhaustive list of error
  codes.

ssl_c_version : integer
  Returns the version of the certificate presented by the client when the
  incoming connection was made over an SSL/TLS transport layer.

ssl_f_der : binary
  Returns the DER formatted certificate presented by the frontend when the
  incoming connection was made over an SSL/TLS transport layer. When used for
  an ACL, the value(s) to match against can be passed in hexadecimal form.

ssl_f_i_dn([<entry>[,<occ>[,<format>]]]) : string
  When the incoming connection was made over an SSL/TLS transport layer,
  returns the full distinguished name of the issuer of the certificate
  presented by the frontend when no <entry> is specified, or the value of the
  first given entry found from the beginning of the DN. If a positive/negative
  occurrence number is specified as the optional second argument, it returns
  the value of the nth given entry value from the beginning/end of the DN.
  For instance, "ssl_f_i_dn(OU,2)" the second organization unit, and
  "ssl_f_i_dn(CN)" retrieves the common name.
  The <format> parameter allows you to receive the DN suitable for
  consumption by different protocols. Currently supported is rfc2253 for
  LDAP v3.
  If you'd like to modify the format only you can specify an empty string
  and zero for the first two parameters. Example: ssl_f_i_dn(,0,rfc2253)

ssl_f_key_alg : string
  Returns the name of the algorithm used to generate the key of the certificate
  presented by the frontend when the incoming connection was made over an
  SSL/TLS transport layer.

ssl_f_notafter : string
  Returns the end date presented by the frontend as a formatted string
  YYMMDDhhmmss[Z] when the incoming connection was made over an SSL/TLS
  transport layer.

ssl_f_notbefore : string
  Returns the start date presented by the frontend as a formatted string
  YYMMDDhhmmss[Z] when the incoming connection was made over an SSL/TLS
  transport layer.

ssl_f_s_dn([<entry>[,<occ>[,<format>]]]) : string
  When the incoming connection was made over an SSL/TLS transport layer,
  returns the full distinguished name of the subject of the certificate
  presented by the frontend when no <entry> is specified, or the value of the
  first given entry found from the beginning of the DN. If a positive/negative
  occurrence number is specified as the optional second argument, it returns
  the value of the nth given entry value from the beginning/end of the DN.
  For instance, "ssl_f_s_dn(OU,2)" the second organization unit, and
  "ssl_f_s_dn(CN)" retrieves the common name.
  The <format> parameter allows you to receive the DN suitable for
  consumption by different protocols. Currently supported is rfc2253 for
  LDAP v3.
  If you'd like to modify the format only you can specify an empty string
  and zero for the first two parameters. Example: ssl_f_s_dn(,0,rfc2253)

ssl_f_serial : binary
  Returns the serial of the certificate presented by the frontend when the
  incoming connection was made over an SSL/TLS transport layer. When used for
  an ACL, the value(s) to match against can be passed in hexadecimal form.

ssl_f_sha1 : binary
  Returns the SHA-1 fingerprint of the certificate presented by the frontend
  when the incoming connection was made over an SSL/TLS transport layer. This
  can be used to know which certificate was chosen using SNI.

ssl_f_sig_alg : string
  Returns the name of the algorithm used to sign the certificate presented by
  the frontend when the incoming connection was made over an SSL/TLS transport
  layer.

ssl_f_version : integer
  Returns the version of the certificate presented by the frontend when the
  incoming connection was made over an SSL/TLS transport layer.

ssl_fc : boolean
  Returns true when the front connection was made via an SSL/TLS transport
  layer and is locally deciphered. This means it has matched a socket declared
  with a "bind" line having the "ssl" option.

  Example :
        # This passes "X-Proto: https" to servers when client connects over SSL
        listen http-https
            bind :80
            bind :443 ssl crt /etc/haproxy.pem
            http-request add-header X-Proto https if { ssl_fc }

ssl_fc_alg_keysize : integer
  Returns the symmetric cipher key size supported in bits when the incoming
  connection was made over an SSL/TLS transport layer.

ssl_fc_alpn : string
  This extracts the Application Layer Protocol Negotiation field from an
  incoming connection made via a TLS transport layer and locally deciphered by
  HAProxy. The result is a string containing the protocol name advertised by
  the client. The SSL library must have been built with support for TLS
  extensions enabled (check haproxy -vv). Note that the TLS ALPN extension is
  not advertised unless the "alpn" keyword on the "bind" line specifies a
  protocol list. Also, nothing forces the client to pick a protocol from this
  list, any other one may be requested. The TLS ALPN extension is meant to
  replace the TLS NPN extension. See also "ssl_fc_npn".

ssl_fc_cipher : string
  Returns the name of the used cipher when the incoming connection was made
  over an SSL/TLS transport layer.

ssl_fc_cipherlist_bin([<filter_option>]) : binary
  Returns the binary form of the client hello cipher list. The maximum
  returned value length is limited by the shared capture buffer size
  controlled by "tune.ssl.capture-buffer-size" setting. Setting
  <filter_option> allows to filter returned data. Accepted values:
    0 : return the full list of ciphers (default)
    1 : exclude GREASE (RFC8701) values from the output

  Example:
      http-request set-header X-SSL-JA3 %[ssl_fc_protocol_hello_id],\
          %[ssl_fc_cipherlist_bin(1),be2dec(-,2)],\
          %[ssl_fc_extlist_bin(1),be2dec(-,2)],\
          %[ssl_fc_eclist_bin(1),be2dec(-,2)],\
          %[ssl_fc_ecformats_bin,be2dec(-,1)]
      acl is_malware req.fhdr(x-ssl-ja3),digest(md5),hex \
          -f /path/to/file/with/malware-ja3.lst
      http-request set-header X-Malware True if is_malware
      http-request set-header X-Malware False if !is_malware

ssl_fc_cipherlist_hex([<filter_option>]) : string
  Returns the binary form of the client hello cipher list encoded as
  hexadecimal. The maximum returned value length is limited by the shared
  capture buffer size controlled by "tune.ssl.capture-buffer-size" setting.
  Setting <filter_option> allows to filter returned data. Accepted values:
    0 : return the full list of ciphers (default)
    1 : exclude GREASE (RFC8701) values from the output

ssl_fc_cipherlist_str([<filter_option>]) : string
  Returns the decoded text form of the client hello cipher list. The maximum
  returned value length is limited by the shared capture buffer size
  controlled by "tune.ssl.capture-buffer-size" setting. Setting
  <filter_option> allows to filter returned data. Accepted values:
    0 : return the full list of ciphers (default)
    1 : exclude GREASE (RFC8701) values from the output
  Note that this sample-fetch is only available with OpenSSL >= 1.0.2. If the
  function is not enabled, this sample-fetch returns the hash like
  "ssl_fc_cipherlist_xxh".

ssl_fc_cipherlist_xxh : integer
  Returns a xxh64 of the cipher list. This hash can return only if the value
  "tune.ssl.capture-buffer-size" is set greater than 0, however the hash take
  into account all the data of the cipher list.

ssl_fc_client_early_traffic_secret : string
  Return the CLIENT_EARLY_TRAFFIC_SECRET as an hexadecimal string for the
  front connection when the incoming connection was made over a TLS 1.3
  transport layer.
  Require OpenSSL >= 1.1.1. This is one of the keys dumped by the OpenSSL
  keylog callback to generate the SSLKEYLOGFILE. The SSL Key logging must be
  activated with "tune.ssl.keylog on" in the global section. See also
  "tune.ssl.keylog"

ssl_fc_client_handshake_traffic_secret : string
  Return the CLIENT_HANDSHAKE_TRAFFIC_SECRET as an hexadecimal string for the
  front connection when the incoming connection was made over a TLS 1.3
  transport layer.
  Require OpenSSL >= 1.1.1. This is one of the keys dumped by the OpenSSL
  keylog callback to generate the SSLKEYLOGFILE. The SSL Key logging must be
  activated with "tune.ssl.keylog on" in the global section. See also
  "tune.ssl.keylog"

ssl_fc_client_random : binary
  Returns the client random of the front connection when the incoming connection
  was made over an SSL/TLS transport layer. It is useful to to decrypt traffic
  sent using ephemeral ciphers. This requires OpenSSL >= 1.1.0, or BoringSSL.

ssl_fc_client_traffic_secret_0 : string
  Return the CLIENT_TRAFFIC_SECRET_0 as an hexadecimal string for the
  front connection when the incoming connection was made over a TLS 1.3
  transport layer.
  Require OpenSSL >= 1.1.1. This is one of the keys dumped by the OpenSSL
  keylog callback to generate the SSLKEYLOGFILE. The SSL Key logging must be
  activated with "tune.ssl.keylog on" in the global section. See also
  "tune.ssl.keylog"

ssl_fc_curve : string
  Returns the name of the curve used in the key agreement when the incoming
  connection was made over an SSL/TLS transport layer. This requires
  OpenSSL >= 3.0.0.

ssl_fc_early_rcvd : boolean
  Returns true if early data were seen over that connection, regardless of the
  fact that the handshake has since completed. It has no practical use case for
  traffic processing, however it's about the only way to "see" that a client
  used 0-RTT to send early data, and is sometimes useful when debugging, since
  the only other alternatives are network traffic captures or logging the front
  connection's flags and matching them in the code. It may also be useful to
  get statistics on clients' capabilities. See also "ssl_fc_has_early".

ssl_fc_early_exporter_secret : string
  Return the EARLY_EXPORTER_SECRET as an hexadecimal string for the
  front connection when the incoming connection was made over an TLS 1.3
  transport layer.
  Require OpenSSL >= 1.1.1. This is one of the keys dumped by the OpenSSL
  keylog callback to generate the SSLKEYLOGFILE. The SSL Key logging must be
  activated with "tune.ssl.keylog on" in the global section. See also
  "tune.ssl.keylog"

ssl_fc_ecformats_bin : binary
  Return the binary form of the client hello supported elliptic curve point
  formats. The maximum returned value length is limited by the shared capture
  buffer size controlled by "tune.ssl.capture-buffer-size" setting.

  Example:
      http-request set-header X-SSL-JA3 %[ssl_fc_protocol_hello_id],\
          %[ssl_fc_cipherlist_bin(1),be2dec(-,2)],\
          %[ssl_fc_extlist_bin(1),be2dec(-,2)],\
          %[ssl_fc_eclist_bin(1),be2dec(-,2)],\
          %[ssl_fc_ecformats_bin,be2dec(-,1)]
      acl is_malware req.fhdr(x-ssl-ja3),digest(md5),hex \
          -f /path/to/file/with/malware-ja3.lst
      http-request set-header X-Malware True if is_malware
      http-request set-header X-Malware False if !is_malware

ssl_fc_eclist_bin([<filter_option>]) : binary
  Returns the binary form of the client hello supported elliptic curves. The
  maximum returned value length is limited by the shared capture buffer size
  controlled by "tune.ssl.capture-buffer-size" setting. Setting
  <filter_option> allows to filter returned data. Accepted values:
    0 : return the full list of supported elliptic curves (default)
    1 : exclude GREASE (RFC8701) values from the output

  Example:
      http-request set-header X-SSL-JA3 %[ssl_fc_protocol_hello_id],\
          %[ssl_fc_cipherlist_bin(1),be2dec(-,2)],\
          %[ssl_fc_extlist_bin(1),be2dec(-,2)],\
          %[ssl_fc_eclist_bin(1),be2dec(-,2)],\
          %[ssl_fc_ecformats_bin,be2dec(-,1)]
      acl is_malware req.fhdr(x-ssl-ja3),digest(md5),hex \
          -f /path/to/file/with/malware-ja3.lst
      http-request set-header X-Malware True if is_malware
      http-request set-header X-Malware False if !is_malware

ssl_fc_err : integer
  When the incoming connection was made over an SSL/TLS transport layer,
  returns the ID of the last error of the first error stack raised on the
  frontend side, or 0 if no error was encountered. It can be used to identify
  handshake related errors other than verify ones (such as cipher mismatch), as
  well as other read or write errors occurring during the connection's
  lifetime.  Any error happening during the client's certificate verification
  process will not be raised through this fetch but via the existing
  "ssl_c_err", "ssl_c_ca_err" and "ssl_c_ca_err_depth" fetches. In order to get
  a text description of this error code, you can either use the
  "ssl_fc_err_str" sample fetch or use the "openssl errstr" command (which
  takes an error code in hexadecimal representation as parameter). Please refer
  to your SSL library's documentation to find the exhaustive list of error
  codes.

ssl_fc_err_str : string
  When the incoming connection was made over an SSL/TLS transport layer,
  returns a string representation of the last error of the first error stack
  that was raised on the frontend side. Any error happening during the client's
  certificate verification process will not be raised through this fetch. See
  also "ssl_fc_err".

ssl_fc_exporter_secret : string
  Return the EXPORTER_SECRET as an hexadecimal string for the
  front connection when the incoming connection was made over a TLS 1.3
  transport layer.
  Require OpenSSL >= 1.1.1. This is one of the keys dumped by the OpenSSL
  keylog callback to generate the SSLKEYLOGFILE. The SSL Key logging must be
  activated with "tune.ssl.keylog on" in the global section. See also
  "tune.ssl.keylog"

ssl_fc_extlist_bin([<filter_option>]) : binary
  Returns the binary form of the client hello extension list. The maximum
  returned value length is limited by the shared capture buffer size
  controlled by "tune.ssl.capture-buffer-size" setting. Setting
  <filter_option> allows to filter returned data. Accepted values:
    0 : return the full list of extensions (default)
    1 : exclude GREASE (RFC8701) values from the output

  Example:
      http-request set-header X-SSL-JA3 %[ssl_fc_protocol_hello_id],\
          %[ssl_fc_cipherlist_bin(1),be2dec(-,2)],\
          %[ssl_fc_extlist_bin(1),be2dec(-,2)],\
          %[ssl_fc_eclist_bin(1),be2dec(-,2)],\
          %[ssl_fc_ecformats_bin,be2dec(-,1)]
      acl is_malware req.fhdr(x-ssl-ja3),digest(md5),hex \
          -f /path/to/file/with/malware-ja3.lst
      http-request set-header X-Malware True if is_malware
      http-request set-header X-Malware False if !is_malware

ssl_fc_has_crt : boolean
  Returns true if a client certificate is present in an incoming connection over
  SSL/TLS transport layer. Useful if 'verify' statement is set to 'optional'.
  Note: on SSL session resumption with Session ID or TLS ticket, client
  certificate is not present in the current connection but may be retrieved
  from the cache or the ticket. So prefer "ssl_c_used" if you want to check if
  current SSL session uses a client certificate.

ssl_fc_has_early : boolean
  Returns true if early data were sent, and the handshake didn't complete yet.
  As it has security implications, it is useful to be able to refuse those, or
  wait until the handshake completes (via the "wait-for-handshake" action). See
  also "ssl_fc_early_rcvd".

ssl_fc_has_sni : boolean
  This checks for the presence of a Server Name Indication TLS extension (SNI)
  in an incoming connection was made over an SSL/TLS transport layer. Returns
  true when the incoming connection presents a TLS SNI field. This requires
  that the SSL library is built with support for TLS extensions enabled (check
  haproxy -vv).

ssl_fc_is_resumed : boolean
  Returns true if the SSL/TLS session has been resumed through the use of
  SSL session cache or TLS tickets on an incoming connection over an SSL/TLS
  transport layer.

ssl_fc_npn : string
  This extracts the Next Protocol Negotiation field from an incoming connection
  made via a TLS transport layer and locally deciphered by HAProxy. The result
  is a string containing the protocol name advertised by the client. The SSL
  library must have been built with support for TLS extensions enabled (check
  haproxy -vv). Note that the TLS NPN extension is not advertised unless the
  "npn" keyword on the "bind" line specifies a protocol list. Also, nothing
  forces the client to pick a protocol from this list, any other one may be
  requested. Please note that the TLS NPN extension was replaced with ALPN.

ssl_fc_protocol : string
  Returns the name of the used protocol when the incoming connection was made
  over an SSL/TLS transport layer.

ssl_fc_protocol_hello_id : integer
  The version of the TLS protocol by which the client wishes to communicate
  during the session as indicated in client hello message. This value can
  return only if the value "tune.ssl.capture-buffer-size" is set greater than
  0.

  Example:
      http-request set-header X-SSL-JA3 %[ssl_fc_protocol_hello_id],\
          %[ssl_fc_cipherlist_bin(1),be2dec(-,2)],\
          %[ssl_fc_extlist_bin(1),be2dec(-,2)],\
          %[ssl_fc_eclist_bin(1),be2dec(-,2)],\
          %[ssl_fc_ecformats_bin,be2dec(-,1)]
      acl is_malware req.fhdr(x-ssl-ja3),digest(md5),hex \
          -f /path/to/file/with/malware-ja3.lst
      http-request set-header X-Malware True if is_malware
      http-request set-header X-Malware False if !is_malware

ssl_fc_server_handshake_traffic_secret : string
  Return the SERVER_HANDSHAKE_TRAFFIC_SECRET as an hexadecimal string for the
  front connection when the incoming connection was made over a TLS 1.3
  transport layer.
  Require OpenSSL >= 1.1.1. This is one of the keys dumped by the OpenSSL
  keylog callback to generate the SSLKEYLOGFILE. The SSL Key logging must be
  activated with "tune.ssl.keylog on" in the global section. See also
  "tune.ssl.keylog"

ssl_fc_server_random : binary
  Returns the server random of the front connection when the incoming connection
  was made over an SSL/TLS transport layer. It is useful to to decrypt traffic
  sent using ephemeral ciphers. This requires OpenSSL >= 1.1.0, or BoringSSL.

ssl_fc_server_traffic_secret_0 : string
  Return the SERVER_TRAFFIC_SECRET_0 as an hexadecimal string for the
  front connection when the incoming connection was made over an TLS 1.3
  transport layer.
  Require OpenSSL >= 1.1.1. This is one of the keys dumped by the OpenSSL
  keylog callback to generate the SSLKEYLOGFILE. The SSL Key logging must be
  activated with "tune.ssl.keylog on" in the global section. See also
  "tune.ssl.keylog"

ssl_fc_session_id : binary
  Returns the SSL ID of the front connection when the incoming connection was
  made over an SSL/TLS transport layer. It is useful to stick a given client to
  a server. It is important to note that some browsers refresh their session ID
  every few minutes.

ssl_fc_session_key : binary
  Returns the SSL session master key of the front connection when the incoming
  connection was made over an SSL/TLS transport layer. It is useful to decrypt
  traffic sent using ephemeral ciphers. This requires OpenSSL >= 1.1.0, or
  BoringSSL.

ssl_fc_sigalgs_bin([<filter_option>]) : binary
  Returns the content of the signatures_algorithms (13) TLS extension presented
  during the Client Hello. It provides a binary list of 2-bytes algorithms
  defined in the TLS RFC: https://datatracker.ietf.org/doc/html/rfc8446#section-4.2.3.

  This value can return only if the value "tune.ssl.capture-buffer-size" is set
  greater than 0. Setting <filter_option> allows to filter returned data.
  Accepted values:
  0 : return the full list of ciphers (default)
  1 : exclude GREASE (RFC8701) values from the output

ssl_fc_sni : string
  This extracts the Server Name Indication TLS extension (SNI) field from an
  incoming connection made via an SSL/TLS transport layer and locally
  deciphered by HAProxy. The result (when present) typically is a string
  matching the HTTPS host name (253 chars or less). The SSL library must have
  been built with support for TLS extensions enabled (check haproxy -vv).

  This fetch is different from "req.ssl_sni" above in that it applies to the
  connection being deciphered by HAProxy and not to SSL contents being blindly
  forwarded. See also "ssl_fc_sni_end" and "ssl_fc_sni_reg" below. This
  requires that the SSL library is built with support for TLS extensions
  enabled (check haproxy -vv).

  CAUTION! Except under very specific conditions, it is normally not correct to
  use this field as a substitute for the HTTP "Host" header field. For example,
  when forwarding an HTTPS connection to a server, the SNI field must be set
  from the HTTP Host header field using "req.hdr(host)" and not from the front
  SNI value. The reason is that SNI is solely used to select the certificate
  the server side will present, and that clients are then allowed to send
  requests with different Host values as long as they match the names in the
  certificate. As such, "ssl_fc_sni" should normally not be used as an argument
  to the "sni" server keyword, unless the backend works in TCP mode.

  ACL derivatives :
    ssl_fc_sni_end : suffix match
    ssl_fc_sni_reg : regex match

ssl_fc_supported_versions_bin([<filter_option>]) : binary
  Returns the content of the supported_versions (43) TLS extension presented
  during the Client Hello. It provides a binary list of 2-bytes versions.
  TLSv1.3 (0x0304), TLSv1.2 (0x0303).

  This value can return only if the value "tune.ssl.capture-buffer-size" is set
  greater than 0. Setting <filter_option> allows to filter returned data.
  Accepted values:
  0 : return the full list of ciphers (default)
  1 : exclude GREASE (RFC8701) values from the output

ssl_fc_unique_id : binary
  When the incoming connection was made over an SSL/TLS transport layer,
  returns the TLS unique ID as defined in RFC5929 section 3. The unique id
  can be encoded to base64 using the converter: "ssl_fc_unique_id,base64".

ssl_fc_use_keysize : integer
  Returns the symmetric cipher key size used in bits when the incoming
  connection was made over an SSL/TLS transport layer.

ssl_s_chain_der : binary
  Returns the DER formatted chain certificate presented by the server when the
  outgoing connection was made over an SSL/TLS transport layer. When used for
  an ACL, the value(s) to match against can be passed in hexadecimal form. One
  can parse the result with any lib accepting ASN.1 DER data. It currently
  does not support resumed sessions.

ssl_s_der : binary
  Returns the DER formatted certificate presented by the server when the
  outgoing connection was made over an SSL/TLS transport layer. When used for
  an ACL, the value(s) to match against can be passed in hexadecimal form.

ssl_s_i_dn([<entry>[,<occ>[,<format>]]]) : string
  When the outgoing connection was made over an SSL/TLS transport layer,
  returns the full distinguished name of the issuer of the certificate
  presented by the server when no <entry> is specified, or the value of the
  first given entry found from the beginning of the DN. If a positive/negative
  occurrence number is specified as the optional second argument, it returns
  the value of the nth given entry value from the beginning/end of the DN.
  For instance, "ssl_s_i_dn(OU,2)" the second organization unit, and
  "ssl_s_i_dn(CN)" retrieves the common name.
  The <format> parameter allows you to receive the DN suitable for
  consumption by different protocols. Currently supported is rfc2253 for
  LDAP v3.
  If you'd like to modify the format only you can specify an empty string
  and zero for the first two parameters. Example: ssl_s_i_dn(,0,rfc2253)

ssl_s_key_alg : string
  Returns the name of the algorithm used to generate the key of the certificate
  presented by the server when the outgoing connection was made over an
  SSL/TLS transport layer.

ssl_s_notafter : string
  Returns the end date presented by the server as a formatted string
  YYMMDDhhmmss[Z] when the outgoing connection was made over an SSL/TLS
  transport layer.

ssl_s_notbefore : string
  Returns the start date presented by the server as a formatted string
  YYMMDDhhmmss[Z] when the outgoing connection was made over an SSL/TLS
  transport layer.

ssl_s_s_dn([<entry>[,<occ>[,<format>]]]) : string
  When the outgoing connection was made over an SSL/TLS transport layer,
  returns the full distinguished name of the subject of the certificate
  presented by the server when no <entry> is specified, or the value of the
  first given entry found from the beginning of the DN. If a positive/negative
  occurrence number is specified as the optional second argument, it returns
  the value of the nth given entry value from the beginning/end of the DN.
  For instance, "ssl_s_s_dn(OU,2)" the second organization unit, and
  "ssl_s_s_dn(CN)" retrieves the common name.
  The <format> parameter allows you to receive the DN suitable for
  consumption by different protocols. Currently supported is rfc2253 for
  LDAP v3.
  If you'd like to modify the format only you can specify an empty string
  and zero for the first two parameters. Example: ssl_s_s_dn(,0,rfc2253)

ssl_s_serial : binary
  Returns the serial of the certificate presented by the server when the
  outgoing connection was made over an SSL/TLS transport layer. When used for
  an ACL, the value(s) to match against can be passed in hexadecimal form.

ssl_s_sha1 : binary
  Returns the SHA-1 fingerprint of the certificate presented by the server
  when the outgoing connection was made over an SSL/TLS transport layer. This
  can be used to know which certificate was chosen using SNI.

ssl_s_sig_alg : string
  Returns the name of the algorithm used to sign the certificate presented by
  the server when the outgoing connection was made over an SSL/TLS transport
  layer.

ssl_s_version : integer
  Returns the version of the certificate presented by the server when the
  outgoing connection was made over an SSL/TLS transport layer.

txn.timer.user : integer
  Total estimated time as seen from client, between the moment the proxy
  accepted it and the moment both ends were closed, without idle time.
  This is the equivalent of %Tu in the log-format and is reported in
  milliseconds (ms). For more details see Section 8.4 "Timing events"


7.3.5. Fetching samples from buffer contents (Layer 6)
------------------------------------------------------

Fetching samples from buffer contents is a bit different from the previous
sample fetches above because the sampled data are ephemeral. These data can
only be used when they're available and will be lost when they're forwarded.
For this reason, samples fetched from buffer contents during a request cannot
be used in a response for example. Even while the data are being fetched, they
can change. Sometimes it is necessary to set some delays or combine multiple
sample fetch methods to ensure that the expected data are complete and usable,
for example through TCP request content inspection. Please see the "tcp-request
content" keyword for more detailed information on the subject.

Warning : Following sample fetches are ignored if used from HTTP proxies. They
          only deal with raw contents found in the buffers. On their side,
          HTTP proxies use structured content. Thus raw representation of
          these data are meaningless. A warning is emitted if an ACL relies on
          one of the following sample fetches. But it is not possible to detect
          all invalid usage (for instance inside a Custom log format or a
          sample expression). So be careful.

Summary of sample fetch methods in this section and their respective types:

  keyword                                             output type
----------------------------------------------------+-------------
distcc_body(<token>[,<occ>])                          binary
distcc_param(<token>[,<occ>])                         integer
payload(<offset>,<length>)                            binary
payload_lv(<offset1>,<length>[,<offset2>])            binary
rdp_cookie([<name>])                                  string
rdp_cookie_cnt([name])                                integer
rep_ssl_hello_type                                    integer
req.len                                               integer
req.payload(<offset>,<length>)                        binary
req.payload_lv(<offset1>,<length>[,<offset2>])        binary
req.proto_http                                        boolean
req.rdp_cookie([<name>])                              string
req.rdp_cookie_cnt([name])                            integer
req.ssl_alpn                                          string
req.ssl_cipherlist                                    binary
req.ssl_ec_ext                                        boolean
req.ssl_hello_type                                    integer
req.ssl_keyshare_groups                               binary
req.ssl_sigalgs                                       binary
req.ssl_sni                                           string
req.ssl_st_ext                                        integer
req.ssl_supported_groups                              binary
req.ssl_ver                                           integer
req_len                                               integer
req_proto_http                                        boolean
req_ssl_hello_type                                    integer
req_ssl_sni                                           string
req_ssl_ver                                           integer
res.len                                               integer
res.payload(<offset>,<length>)                        binary
res.payload_lv(<offset1>,<length>[,<offset2>])        binary
res.ssl_hello_type                                    integer
----------------------------------------------------+-------------

Detailed list:

distcc_body(<token>[,<occ>]) : binary
  Parses a distcc message and returns the body associated to occurrence #<occ>
  of the token <token>. Occurrences start at 1, and when unspecified, any may
  match though in practice only the first one is checked for now. This can be
  used to extract file names or arguments in files built using distcc through
  HAProxy. Please refer to distcc's protocol documentation for the complete
  list of supported tokens.

distcc_param(<token>[,<occ>]) : integer
  Parses a distcc message and returns the parameter associated to occurrence
  #<occ> of the token <token>. Occurrences start at 1, and when unspecified,
  any may match though in practice only the first one is checked for now. This
  can be used to extract certain information such as the protocol version, the
  file size or the argument in files built using distcc through HAProxy.
  Another use case consists in waiting for the start of the preprocessed file
  contents before connecting to the server to avoid keeping idle connections.
  Please refer to distcc's protocol documentation for the complete list of
  supported tokens.

  Example :
      # wait up to 20s for the pre-processed file to be uploaded
      tcp-request inspect-delay 20s
      tcp-request content accept if { distcc_param(DOTI) -m found }
      # send large files to the big farm
      use_backend big_farm if { distcc_param(DOTI) gt 1000000 }

payload(<offset>,<length>) : binary (deprecated)
  This is an alias for "req.payload" when used in the context of a request (e.g.
  "stick on", "stick match"), and for "res.payload" when used in the context of
  a response such as in "stick store response".

payload_lv(<offset1>,<length>[,<offset2>]) : binary (deprecated)
  This is an alias for "req.payload_lv" when used in the context of a request
  (e.g. "stick on", "stick match"), and for "res.payload_lv" when used in the
  context of a response such as in "stick store response".

req.len : integer
req_len : integer (deprecated)
  Returns an integer value corresponding to the number of bytes present in the
  request buffer. This is mostly used in ACL. It is important to understand
  that this test does not return false as long as the buffer is changing. This
  means that a check with equality to zero will almost always immediately match
  at the beginning of the session, while a test for more data will wait for
  that data to come in and return false only when HAProxy is certain that no
  more data will come in. This test was designed to be used with TCP request
  content inspection.

req.payload(<offset>,<length>) : binary
  This extracts a binary block of <length> bytes and starting at byte <offset>
  in the request buffer. As a special case, if the <length> argument is zero,
  the the whole buffer from <offset> to the end is extracted. This can be used
  with ACLs in order to check for the presence of some content in a buffer at
  any location.

  ACL derivatives :
    req.payload(<offset>,<length>) : hex binary match

req.payload_lv(<offset1>,<length>[,<offset2>]) : binary
  This extracts a binary block whose size is specified at <offset1> for <length>
  bytes, and which starts at <offset2> if specified or just after the length in
  the request buffer. The <offset2> parameter also supports relative offsets if
  prepended with a '+' or '-' sign.

  ACL derivatives :
    req.payload_lv(<offset1>,<length>[,<offset2>]) : hex binary match

  Example : please consult the example from the "stick store-response" keyword.

req.proto_http : boolean
req_proto_http : boolean (deprecated)
  Returns true when data in the request buffer look like HTTP and correctly
  parses as such. It is the same parser as the common HTTP request parser which
  is used so there should be no surprises. The test does not match until the
  request is complete, failed or timed out. This test may be used to report the
  protocol in TCP logs, but the biggest use is to block TCP request analysis
  until a complete HTTP request is present in the buffer, for example to track
  a header.

  Example:
        # track request counts per "base" (concatenation of Host+URL)
        tcp-request inspect-delay 10s
        tcp-request content reject if !HTTP
        tcp-request content track-sc0 base table req-rate

req.rdp_cookie([<name>]) : string
rdp_cookie([<name>]) : string (deprecated)
  When the request buffer looks like the RDP protocol, extracts the RDP cookie
  <name>, or any cookie if unspecified. The parser only checks for the first
  cookie, as illustrated in the RDP protocol specification. The cookie name is
  case insensitive. Generally the "MSTS" cookie name will be used, as it can
  contain the user name of the client connecting to the server if properly
  configured on the client. The "MSTSHASH" cookie is often used as well for
  session stickiness to servers.

  This differs from "balance rdp-cookie" in that any balancing algorithm may be
  used and thus the distribution of clients to backend servers is not linked to
  a hash of the RDP cookie. It is envisaged that using a balancing algorithm
  such as "balance roundrobin" or "balance leastconn" will lead to a more even
  distribution of clients to backend servers than the hash used by "balance
  rdp-cookie".

  ACL derivatives :
    req.rdp_cookie([<name>]) : exact string match

  Example :
   listen tse-farm
       bind 0.0.0.0:3389
       # wait up to 5s for an RDP cookie in the request
       tcp-request inspect-delay 5s
       tcp-request content accept if RDP_COOKIE
       # apply RDP cookie persistence
       persist rdp-cookie
       # Persist based on the mstshash cookie
       # This is only useful makes sense if
       # balance rdp-cookie is not used
       stick-table type string size 204800
       stick on req.rdp_cookie(mstshash)
       server srv1 1.1.1.1:3389
       server srv1 1.1.1.2:3389

  See also : "balance rdp-cookie", "persist rdp-cookie", "tcp-request" and the
  "req.rdp_cookie" ACL.

req.rdp_cookie_cnt([name]) : integer
rdp_cookie_cnt([name]) : integer (deprecated)
  Tries to parse the request buffer as RDP protocol, then returns an integer
  corresponding to the number of RDP cookies found. If an optional cookie name
  is passed, only cookies matching this name are considered. This is mostly
  used in ACL.

  ACL derivatives :
    req.rdp_cookie_cnt([<name>]) : integer match

req.ssl_alpn : string
  Returns a string containing the values of the Application-Layer Protocol
  Negotiation (ALPN) TLS extension (RFC7301), sent by the client within the SSL
  ClientHello message. Note that this only applies to raw contents found in the
  request buffer and not to the contents deciphered via an SSL data layer, so
  this will not work with "bind" lines having the "ssl" option. This is useful
  in ACL to make a routing decision based upon the ALPN preferences of a TLS
  client, like in the example below. See also "ssl_fc_alpn".

  Examples :
     # Wait for a client hello for at most 5 seconds
     tcp-request inspect-delay 5s
     tcp-request content accept if { req.ssl_hello_type 1 }
     use_backend bk_acme if { req.ssl_alpn acme-tls/1 }
     default_backend bk_default

req.ssl_cipherlist binary
  Returns the binary form of the list of symmetric cipher options supported by
  the client as reported in the contents of a TLS ClientHello. Note that this
  only applies to raw contents found in the request buffer and not to contents
  deciphered via an SSL data layer, so this will not work with "bind" lines
  having the "ssl" option. Refer to "ssl_fc_cipherlist_bin" which is the SSL
  bind equivalent that can be used when the "ssl" option is specified.

  Examples :
    # Wait for a client hello for at most 5 seconds
    tcp-request inspect-delay 5s
    tcp-request content accept if { req.ssl_hello_type 1 }
    use-server fe3 if { req.ssl_cipherlist,be2hex(:,2),lower -m sub 1302:009f }
    server fe3  ${htst_fe3_addr}:${htst_fe3_port}

req.ssl_ec_ext : boolean
  Returns a boolean identifying if client sent the Supported Elliptic Curves
  Extension as defined in RFC4492, section 5.1. within the SSL ClientHello
  message. This can be used to present ECC compatible clients with EC
  certificate and to use RSA for all others, on the same IP address. Note that
  this only applies to raw contents found in the request buffer and not to
  contents deciphered via an SSL data layer, so this will not work with "bind"
  lines having the "ssl" option.

req.ssl_hello_type : integer
req_ssl_hello_type : integer (deprecated)
  Returns an integer value containing the type of the SSL hello message found
  in the request buffer if the buffer contains data that parse as a complete
  SSL (v3 or superior) client hello message. Note that this only applies to raw
  contents found in the request buffer and not to contents deciphered via an
  SSL data layer, so this will not work with "bind" lines having the "ssl"
  option. This is mostly used in ACL to detect presence of an SSL hello message
  that is supposed to contain an SSL session ID usable for stickiness.

req.ssl_keyshare_groups binary
  Return the binary format of the list of cryptographic parameters for key exchange
  supported by the client as reported in the TLS ClientHello. In TLS v1.3, keyshare
  is part of the ClientHello message and is the final client hello extension. Note
  that this only applies to raw contents found in the request buffer and not to
  contents deciphered via an  SSL data layer, so this will not work with "bind"
  lines having the "ssl" option.

  Examples :
    # Wait for a client hello for at most 5 seconds
    tcp-request inspect-delay 5s
    tcp-request content accept if { req.ssl_hello_type 1 }
    use-server fe3 if { req.ssl_keyshare_groups,be2hex(:,2),lower -m sub 001d  }
    server fe3  ${htst_fe3_addr}:${htst_fe3_port}

req.ssl_sigalgs binary
  Returns the binary form of the list of signature algorithms supported by the
  client as reported in the TLS ClientHello. This is available as a client hello
  extension. Note that this only applies to raw contents found in the request
  buffer and not to contents deciphered via an SSL data layer, so this will not
  work with "bind" lines having the "ssl" option. Refer to "ssl_fc_sigalgs_bin"
  which is the SSL bind equivalent that can be used when the "ssl" option is
  specified.

  Examples :
    # Wait for a client hello for at most 5 seconds
    tcp-request inspect-delay 5s
    tcp-request content accept if { req.ssl_hello_type 1 }
    use-server fe4 if { req.ssl_sigalgs,be2hex(:,2),lower -m sub 0403:0805 }
    server fe4  ${htst_fe4_addr}:${htst_fe4_port}

req.ssl_sni : string
req_ssl_sni : string (deprecated)
  Returns a string containing the value of the Server Name TLS extension sent
  by a client in a TLS stream passing through the request buffer if the buffer
  contains data that parse as a complete SSL (v3 or superior) client hello
  message. Note that this only applies to raw contents found in the request
  buffer and not to contents deciphered via an SSL data layer, so this will not
  work with "bind" lines having the "ssl" option. This will only work for actual
  implicit TLS based protocols like HTTPS (443), IMAPS (993), SMTPS (465),
  however it will not work for explicit TLS based protocols, like SMTP (25/587)
  or IMAP (143). SNI normally contains the name of the host the client tries to
  connect to (for recent browsers). SNI is useful for allowing or denying access
  to certain hosts when SSL/TLS is used by the client. This test was designed to
  be used with TCP request content inspection. If content switching is needed,
  it is recommended to first wait for a complete client hello (type 1), like in
  the example below. See also "ssl_fc_sni".

  ACL derivatives :
    req.ssl_sni : exact string match

  Examples :
     # Wait for a client hello for at most 5 seconds
     tcp-request inspect-delay 5s
     tcp-request content accept if { req.ssl_hello_type 1 }
     use_backend bk_allow if { req.ssl_sni -f allowed_sites }
     default_backend bk_sorry_page

req.ssl_st_ext : integer
  Returns 0 if the client didn't send a SessionTicket TLS Extension (RFC5077)
  Returns 1 if the client sent SessionTicket TLS Extension
  Returns 2 if the client also sent non-zero length TLS SessionTicket
  Note that this only applies to raw contents found in the request buffer and
  not to contents deciphered via an SSL data layer, so this will not work with
  "bind" lines having the "ssl" option. This can for example be used to detect
  whether the client sent a SessionTicket or not and stick it accordingly, if
  no SessionTicket then stick on SessionID or don't stick as there's no server
  side state is there when SessionTickets are in use.

req.ssl_supported_groups binary
  Returns the binary form of the list of supported groups supported by the client
  as reported in the TLS ClientHello and used for key exchange which can include
  both elliptic curve and non-EC key exchange. Note that this only applies to raw
  contents found in the request buffer and not to contents deciphered via an SSL
  data layer, so this will not  work with "bind" lines having the "ssl" option.
  Refer to "ssl_fc_eclist_bin" which is the SSL bind equivalent that can be used
  when the "ssl" option is specified.

  Examples :
    # Wait for a client hello for at most 5 seconds
    tcp-request inspect-delay 5s
    tcp-request content accept if { req.ssl_hello_type 1 }
    use-server fe3 if { req.ssl_supported_groups, be2hex(:,2),lower -m sub 0017 }
    server fe3  ${htst_fe3_addr}:${htst_fe3_port}

req.ssl_ver : integer
req_ssl_ver : integer (deprecated)
  Returns an integer value containing the version of the SSL/TLS protocol of a
  stream present in the request buffer. Both SSLv2 hello messages and SSLv3
  messages are supported. TLSv1 is announced as SSL version 3.1. The value is
  composed of the major version multiplied by 65536, added to the minor
  version. Note that this only applies to raw contents found in the request
  buffer and not to contents deciphered via an SSL data layer, so this will not
  work with "bind" lines having the "ssl" option. The ACL version of the test
  matches against a decimal notation in the form MAJOR.MINOR (e.g. 3.1). This
  fetch is mostly used in ACL.

  ACL derivatives :
    req.ssl_ver : decimal match

res.len : integer
  Returns an integer value corresponding to the number of bytes present in the
  response buffer. This is mostly used in ACL. It is important to understand
  that this test does not return false as long as the buffer is changing. This
  means that a check with equality to zero will almost always immediately match
  at the beginning of the stream, while a test for more data will wait for
  that data to come in and return false only when HAProxy is certain that no
  more data will come in. This test was designed to be used with TCP response
  content inspection. But it may also be used in tcp-check based expect rules.

res.payload(<offset>,<length>) : binary
  This extracts a binary block of <length> bytes and starting at byte <offset>
  in the response buffer. As a special case, if the <length> argument is zero,
  the whole buffer from <offset> to the end is extracted. This can be used
  with ACLs in order to check for the presence of some content in a buffer at
  any location. It may also be used in tcp-check based expect rules.

res.payload_lv(<offset1>,<length>[,<offset2>]) : binary
  This extracts a binary block whose size is specified at <offset1> for <length>
  bytes, and which starts at <offset2> if specified or just after the length in
  the response buffer. The <offset2> parameter also supports relative offsets
  if prepended with a '+' or '-' sign. It may also be used in tcp-check based
  expect rules.

  Example : please consult the example from the "stick store-response" keyword.

res.ssl_hello_type : integer
rep_ssl_hello_type : integer (deprecated)
  Returns an integer value containing the type of the SSL hello message found
  in the response buffer if the buffer contains data that parses as a complete
  SSL (v3 or superior) hello message. Note that this only applies to raw
  contents found in the response buffer and not to contents deciphered via an
  SSL data layer, so this will not work with "server" lines having the "ssl"
  option. This is mostly used in ACL to detect presence of an SSL hello message
  that is supposed to contain an SSL session ID usable for stickiness.


7.3.6. Fetching HTTP samples (Layer 7)
--------------------------------------

It is possible to fetch samples from HTTP contents, requests and responses.
This application layer is also called layer 7. It is only possible to fetch the
data in this section when a full HTTP request or response has been parsed from
its respective request or response buffer. This is always the case with all
HTTP specific rules and for sections running with "mode http". When using TCP
content inspection, it may be necessary to support an inspection delay in order
to let the request or response come in first. These fetches may require a bit
more CPU resources than the layer 4 ones, but not much since the request and
response are indexed.

Note : Regarding HTTP processing from the tcp-request content rules, everything
       will work as expected from an HTTP proxy. However, from a TCP proxy,
       without an HTTP upgrade, it will only work for HTTP/1 content. For
       HTTP/2 content, only the preface is visible. Thus, it is only possible
       to rely to "req.proto_http", "req.ver" and eventually "method" sample
       fetches. All other L7 sample fetches will fail. After an HTTP upgrade,
       they will work in the same manner than from an HTTP proxy.

Summary of sample fetch methods in this section and their respective types:

  keyword                                          output type
-------------------------------------------------+-------------
base                                               string
base32                                             integer
base32+src                                         binary
baseq                                              string
capture.req.hdr(<idx>)                             string
capture.req.method                                 string
capture.req.uri                                    string
capture.req.ver                                    string
capture.res.hdr(<idx>)                             string
capture.res.ver                                    string
cook([<name>])                                     string
cook_cnt([<name>])                                 integer
cook_val([<name>])                                 integer
cookie([<name>])                                   string
hdr([<name>[,<occ>]])                              string
hdr_cnt([<header>])                                integer
hdr_ip([<name>[,<occ>]])                           ip
hdr_val([<name>[,<occ>]])                          integer
http_auth(<userlist>)                              boolean
http_auth_bearer([<header>])                       string
http_auth_group(<userlist>)                        string
http_auth_pass                                     string
http_auth_type                                     string
http_auth_user                                     string
http_first_req                                     boolean
method                                             integer
path                                               string
pathq                                              string
query([<options>])                                 string
req.body                                           binary
req.body_len                                       integer
req.body_param([<name>[,i]])                       string
req.body_size                                      integer
req.cook([<name>])                                 string
req.cook_cnt([<name>])                             integer
req.cook_names([<delim>])                          string
req.cook_val([<name>])                             integer
req.fhdr(<name>[,<occ>])                           string
req.fhdr_cnt([<name>])                             integer
req.hdr([<name>[,<occ>]])                          string
req.hdr_cnt([<name>])                              integer
req.hdr_ip([<name>[,<occ>]])                       ip
req.hdr_names([<delim>])                           string
req.hdr_val([<name>[,<occ>]])                      integer
req.hdrs                                           string
req.hdrs_bin                                       binary
req.timer.hdr                                      integer
req.timer.idle                                     integer
req.timer.queue                                    integer
req.timer.tq                                       integer
req.ver                                            string
req_ver                                            string
request_date([<unit>])                             integer
res.body                                           binary
res.body_len                                       integer
res.body_size                                      integer
res.cache_hit                                      boolean
res.cache_name                                     string
res.comp                                           boolean
res.comp_algo                                      string
res.cook([<name>])                                 string
res.cook_cnt([<name>])                             integer
res.cook_names([<delim>])                          string
res.cook_val([<name>])                             integer
res.fhdr([<name>[,<occ>]])                         string
res.fhdr_cnt([<name>])                             integer
res.hdr([<name>[,<occ>]])                          string
res.hdr_cnt([<name>])                              integer
res.hdr_ip([<name>[,<occ>]])                       ip
res.hdr_names([<delim>])                           string
res.hdr_val([<name>[,<occ>]])                      integer
res.hdrs                                           string
res.hdrs_bin                                       binary
res.timer.hdr                                      integer
res.ver                                            string
resp_ver                                           string
scook([<name>])                                    string
scook_cnt([<name>])                                integer
scook_val([<name>])                                integer
server_status                                      integer
set-cookie([<name>])                               string
shdr([<name>[,<occ>]])                             string
shdr_cnt([<name>])                                 integer
shdr_ip([<name>[,<occ>]])                          ip
shdr_val([<name>[,<occ>]])                         integer
status                                             integer
txn.status                                         integer
txn.timer.total                                    integer
unique-id                                          string
url                                                string
url32                                              integer
url32+src                                          binary
url_ip                                             ip
url_param([<name>[,<delim>[,i]]])                  string
url_port                                           integer
urlp([<name>[,<delim>[,i]]])                       string
urlp_val([<name>[,<delim>[,i]]])                   integer
-------------------------------------------------+-------------

Detailed list:

base : string
  This returns the concatenation of the first Host header and the path part of
  the request, which starts at the first slash and ends before the question
  mark. It can be useful in virtual hosted environments to detect URL abuses as
  well as to improve shared caches efficiency. Using this with a limited size
  stick table also allows one to collect statistics about most commonly
  requested objects by host/path. With ACLs it can allow simple content
  switching rules involving the host and the path at the same time, such as
  "www.example.com/favicon.ico". See also "path" and "uri".

  ACL derivatives :
    base     : exact string match
    base_beg : prefix match
    base_dir : subdir match
    base_dom : domain match
    base_end : suffix match
    base_len : length match
    base_reg : regex match
    base_sub : substring match

base32 : integer
  This returns a 32-bit hash of the value returned by the "base" fetch method
  above. This is useful to track per-URL activity on high traffic sites without
  having to store all URLs. Instead a shorter hash is stored, saving a lot of
  memory. The output type is an unsigned integer. The hash function used is
  SDBM with full avalanche on the output. Technically, base32 is exactly equal
  to "base,sdbm(1)".

base32+src : binary
  This returns the concatenation of the base32 fetch above and the src fetch
  below. The resulting type is of type binary, with a size of 8 or 20 bytes
  depending on the source address family. This can be used to track per-IP,
  per-URL counters.

baseq : string
  This returns the concatenation of the first Host header and the path part of
  the request with the query-string, which starts at the first slash. Using this
  instead of "base" allows one to properly identify the target resource, for
  statistics or caching use cases. See also "path", "pathq" and "base".

capture.req.hdr(<idx>) : string
  This extracts the content of the header captured by the "capture request
  header", idx is the position of the capture keyword in the configuration.
  The first entry is an index of 0. See also: "capture request header".

capture.req.method : string
  This extracts the METHOD of an HTTP request. It can be used in both request
  and response. Unlike "method", it can be used in both request and response
  because it's allocated.

capture.req.uri : string
  This extracts the request's URI, which starts at the first slash and ends
  before the first space in the request (without the host part). Unlike "path"
  and "url", it can be used in both request and response because it's
  allocated.

capture.req.ver : string
  This extracts the request's HTTP version and returns either "HTTP/1.0" or
  "HTTP/1.1". Unlike "req.ver", it can be used in both request, response, and
  logs because it relies on a persistent flag.

capture.res.hdr(<idx>) : string
  This extracts the content of the header captured by the "capture response
  header", idx is the position of the capture keyword in the configuration.
  The first entry is an index of 0.
  See also: "capture response header"

capture.res.ver : string
  This extracts the response's HTTP version and returns either "HTTP/1.0" or
  "HTTP/1.1". Unlike "res.ver", it can be used in logs because it relies on a
  persistent flag.

cookie([<name>]) : string (deprecated)
  This extracts the last occurrence of the cookie name <name> on a "Cookie"
  header line from the request, or a "Set-Cookie" header from the response, and
  returns its value as a string. A typical use is to get multiple clients
  sharing a same profile use the same server. This can be similar to what
  "appsession" did with the "request-learn" statement, but with support for
  multi-peer synchronization and state keeping across restarts. If no name is
  specified, the first cookie value is returned. This fetch should not be used
  anymore and should be replaced by req.cook() or res.cook() instead as it
  ambiguously uses the direction based on the context where it is used.

hdr([<name>[,<occ>]]) : string
  This is equivalent to req.hdr() when used on requests, and to res.hdr() when
  used on responses. Please refer to these respective fetches for more details.
  In case of doubt about the fetch direction, please use the explicit ones.
  Note that contrary to the hdr() sample fetch method, the hdr_* ACL keywords
  unambiguously apply to the request headers.

http_auth(<userlist>) : boolean
  Returns a boolean indicating whether the authentication data received from
  the client match a username & password stored in the specified userlist. This
  fetch function is not really useful outside of ACLs. Currently only http
  basic auth is supported.

http_auth_bearer([<header>]) : string
  Returns the client-provided token found in the authorization data when the
  Bearer scheme is used (to send JSON Web Tokens for instance). No check is
  performed on the data sent by the client.
  If a specific <header> is supplied, it will parse this header instead of the
  Authorization one.

http_auth_group(<userlist>) : string
  Returns a string corresponding to the user name found in the authentication
  data received from the client if both the user name and password are valid
  according to the specified userlist. The main purpose is to use it in ACLs
  where it is then checked whether the user belongs to any group within a list.
  This fetch function is not really useful outside of ACLs. Currently only http
  basic auth is supported.

  ACL derivatives :
    http_auth_group(<userlist>) : group ...
    Returns true when the user extracted from the request and whose password is
    valid according to the specified userlist belongs to at least one of the
    groups.

http_auth_pass : string
  Returns the user's password found in the authentication data received from
  the client, as supplied in the Authorization header. Not checks are
  performed by this sample fetch. Only Basic authentication is supported.

http_auth_type : string
  Returns the authentication method found in the authentication data received from
  the client, as supplied in the Authorization header. Not checks are
  performed by this sample fetch. Only Basic authentication is supported.

http_auth_user : string
  Returns the user name found in the authentication data received from the
  client, as supplied in the Authorization header. Not checks are performed by
  this sample fetch. Only Basic authentication is supported.

http_first_req : boolean
  Returns true when the request being processed is the first one of the
  connection. This can be used to add or remove headers that may be missing
  from some requests when a request is not the first one, or to help grouping
  requests in the logs.

method : integer + string
  Returns an integer value corresponding to the method in the HTTP request. For
  example, "GET" equals 1 (check sources to establish the matching). Value 9
  means "other method" and may be converted to a string extracted from the
  stream. This should not be used directly as a sample, this is only meant to
  be used from ACLs, which transparently convert methods from patterns to these
  integer + string values. Some predefined ACL already check for most common
  methods.

  ACL derivatives :
    method : case insensitive method match

  Example :
      # only accept GET and HEAD requests
      acl valid_method method GET HEAD
      http-request deny if ! valid_method

path : string
  This extracts the request's URL path, which starts at the first slash and
  ends before the question mark (without the host part). A typical use is with
  prefetch-capable caches, and with portals which need to aggregate multiple
  information from databases and keep them in caches. Note that with outgoing
  caches, it would be wiser to use "url" instead. With ACLs, it's typically
  used to match exact file names (e.g. "/login.php"), or directory parts using
  the derivative forms. See also the "url" and "base" fetch methods. Please
  note that any fragment reference in the URI ('#' after the path) is strictly
  forbidden by the HTTP standard and will be rejected. However, if the frontend
  receiving the request has "option accept-unsafe-violations-in-http-request",
  then this fragment part will be accepted and will also appear in the path.

  ACL derivatives :
    path     : exact string match
    path_beg : prefix match
    path_dir : subdir match
    path_dom : domain match
    path_end : suffix match
    path_len : length match
    path_reg : regex match
    path_sub : substring match

pathq : string
  This extracts the request's URL path with the query-string, which starts at
  the first slash. This sample fetch is pretty handy to always retrieve a
  relative URI, excluding the scheme and the authority part, if any. Indeed,
  while it is the common representation for an HTTP/1.1 request target, in
  HTTP/2, an absolute URI is often used. This sample fetch will return the same
  result in both cases. Please note that any fragment reference in the URI ('#'
  after the path) is strictly forbidden by the HTTP standard and will be
  rejected. However, if the frontend receiving the request has "option
  accept-unsafe-violations-in-http-request", then this fragment part will be
  accepted and will also appear in the path.

query([<options>]) : string
  This extracts the request's query string, which starts after the first
  question mark. If no question mark is present, this fetch returns nothing. If
  a question mark is present but nothing follows, it returns an empty string.
  This means it's possible to easily know whether a query string is present
  using the "found" matching method. This fetch is the complement of "path"
  which stops before the question mark and of "query_string", which include the
  question mark.

  An optional parameter may be used to customize the return value. Following
  options are supported:

    - with_qm : Include the question mark at the beginning ot the query string,
                if not empty.

req.body : binary
  This returns the HTTP request's available body as a block of data. It is
  recommended to use "option http-buffer-request" to be sure to wait, as much
  as possible, for the request's body.

req.body_len : integer
  This returns the length of the HTTP request's available body in bytes. It may
  be lower than the advertised length if the body is larger than the buffer. It
  is recommended to use "option http-buffer-request" to be sure to wait, as
  much as possible, for the request's body.

req.body_param([<name>[,i]]) : string
  This fetch assumes that the body of the POST request is url-encoded. The user
  can check if the "content-type" contains the value
  "application/x-www-form-urlencoded". This extracts the first occurrence of the
  parameter <name> in the body, which ends before '&'. The parameter name is
  case-sensitive, unless "i" is added as a second argument. If no name is
  given, any parameter will match, and the first one will be returned. The
  result is a string corresponding to the value of the parameter <name> as
  presented in the request body (no URL decoding is performed). Note that the
  ACL version of this fetch iterates over multiple parameters and will
  iteratively report all parameters values if no name is given.

req.body_size : integer
  This returns the advertised length of the HTTP request's body in bytes. It
  will represent the advertised Content-Length header, or the size of the
  available data in case of chunked encoding.

req.cook([<name>]) : string
cook([<name>]) : string (deprecated)
  This extracts the last occurrence of the cookie name <name> on a "Cookie"
  header line from the request, and returns its value as string. If no name is
  specified, the first cookie value is returned. When used with ACLs, all
  matching cookies are evaluated. Spaces around the name and the value are
  ignored as requested by the Cookie header specification (RFC6265). The cookie
  name is case-sensitive. Empty cookies are valid, so an empty cookie may very
  well return an empty value if it is present. Use the "found" match to detect
  presence. Use the res.cook() variant for response cookies sent by the server.

  ACL derivatives :
    req.cook([<name>])     : exact string match
    req.cook_beg([<name>]) : prefix match
    req.cook_dir([<name>]) : subdir match
    req.cook_dom([<name>]) : domain match
    req.cook_end([<name>]) : suffix match
    req.cook_len([<name>]) : length match
    req.cook_reg([<name>]) : regex match
    req.cook_sub([<name>]) : substring match

req.cook_cnt([<name>]) : integer
cook_cnt([<name>]) : integer (deprecated)
  Returns an integer value representing the number of occurrences of the cookie
  <name> in the request, or all cookies if <name> is not specified.

req.cook_names([<delim>]) : string
  This builds a string made from the concatenation of all cookie names as they
  appear in the request (Cookie header) when the rule is evaluated. The default
  delimiter is the comma (',') but it may be overridden as an optional argument
  <delim>. In this case, only the first character of <delim> is considered.

req.cook_val([<name>]) : integer
cook_val([<name>]) : integer (deprecated)
  This extracts the last occurrence of the cookie name <name> on a "Cookie"
  header line from the request, and converts its value to an integer which is
  returned. If no name is specified, the first cookie value is returned. When
  used in ACLs, all matching names are iterated over until a value matches.

req.fhdr(<name>[,<occ>]) : string
  This returns the full value of the last occurrence of header <name> in an
  HTTP request. It differs from req.hdr() in that any commas present in the
  value are returned and are not used as delimiters. This is sometimes useful
  with headers such as User-Agent.

  When used from an ACL, all occurrences are iterated over until a match is
  found.

  Optionally, a specific occurrence might be specified as a position number.
  Positive values indicate a position from the first occurrence, with 1 being
  the first one. Negative values indicate positions relative to the last one,
  with -1 being the last one.

req.fhdr_cnt([<name>]) : integer
  Returns an integer value representing the number of occurrences of request
  header field name <name>, or the total number of header fields if <name> is
  not specified. Like req.fhdr() it differs from res.hdr_cnt() by not splitting
  headers at commas.

req.hdr([<name>[,<occ>]]) : string
  This returns the last comma-separated value of the header <name> in an HTTP
  request. The fetch considers any comma as a delimiter for distinct values.
  This is useful if you need to process headers that are defined to be a list
  of values, such as Accept, or X-Forwarded-For. If full-line headers are
  desired instead, use req.fhdr(). Please carefully check RFC 7231 to know how
  certain headers are supposed to be parsed. Also, some of them are case
  insensitive (e.g. Connection).

  When used from an ACL, all occurrences are iterated over until a match is
  found.

  Optionally, a specific occurrence might be specified as a position number.
  Positive values indicate a position from the first occurrence, with 1 being
  the first one. Negative values indicate positions relative to the last one,
  with -1 being the last one.

  A typical use is with the X-Forwarded-For header once converted to IP,
  associated with an IP stick-table.

  ACL derivatives :
    hdr([<name>[,<occ>]])     : exact string match
    hdr_beg([<name>[,<occ>]]) : prefix match
    hdr_dir([<name>[,<occ>]]) : subdir match
    hdr_dom([<name>[,<occ>]]) : domain match
    hdr_end([<name>[,<occ>]]) : suffix match
    hdr_len([<name>[,<occ>]]) : length match
    hdr_reg([<name>[,<occ>]]) : regex match
    hdr_sub([<name>[,<occ>]]) : substring match

req.hdr_cnt([<name>]) : integer
hdr_cnt([<header>]) : integer (deprecated)
  Returns an integer value representing the number of occurrences of request
  header field name <name>, or the total number of header field values if
  <name> is not specified. Like req.hdr() it counts each comma separated
  part of the header's value. If counting of full-line headers is desired,
  then req.fhdr_cnt() should be used instead.

  With ACLs, it can be used to detect presence, absence or abuse of a specific
  header, as well as to block request smuggling attacks by rejecting requests
  which contain more than one of certain headers.

  Refer to req.hdr() for more information on header matching.

req.hdr_ip([<name>[,<occ>]]) : ip
hdr_ip([<name>[,<occ>]]) : ip (deprecated)
  This extracts the last occurrence of header <name> in an HTTP request,
  converts it to an IPv4 or IPv6 address and returns this address. When used
  with ACLs, all occurrences are checked, and if <name> is omitted, every value
  of every header is checked. The parser strictly adheres to the format
  described in RFC7239, with the extension that IPv4 addresses may optionally
  be followed by a colon (':') and a valid decimal port number (0 to 65535),
  which will be silently dropped. All other forms will not match and will
  cause the address to be ignored.

  The <occ> parameter is processed as with req.hdr().

  A typical use is with the X-Forwarded-For and X-Client-IP headers.

req.hdr_names([<delim>]) : string
  This builds a string made from the concatenation of all header names as they
  appear in the request when the rule is evaluated. The default delimiter is
  the comma (',') but it may be overridden as an optional argument <delim>. In
  this case, only the first character of <delim> is considered.

req.hdr_val([<name>[,<occ>]]) : integer
hdr_val([<name>[,<occ>]]) : integer (deprecated)
  This extracts the last occurrence of header <name> in an HTTP request, and
  converts it to an integer value. When used with ACLs, all occurrences are
  checked, and if <name> is omitted, every value of every header is checked.

  The <occ> parameter is processed as with req.hdr().

  A typical use is with the X-Forwarded-For header.

req.hdrs : string
  Returns the current request headers as string including the last empty line
  separating headers from the request body. The last empty line can be used to
  detect a truncated header block. This sample fetch is useful for some SPOE
  headers analyzers and for advanced logging.

req.hdrs_bin : binary
  Returns the current request headers contained in preparsed binary form. This
  is useful for offloading some processing with SPOE. Each string is described
  by a length followed by the number of bytes indicated in the length. The
  length is represented using the variable integer encoding detailed in the
  SPOE documentation. The end of the list is marked by a couple of empty header
  names and values (length of 0 for both).

  *(<str:header-name><str:header-value>)<empty string><empty string>

  int:  refer to the SPOE documentation for the encoding
  str:  <int:length><bytes>

req.timer.hdr : integer
  Total time to get the client request (HTTP mode only). It's the time elapsed
  between the first bytes received and the moment the proxy received the empty
  line marking the end of the HTTP headers. This is reported in milliseconds
  (ms) and is equivalent to %TR in log-format. See section 8.4 "Timing events"
  for more details.

req.timer.idle : integer
  This is the idle time before the HTTP request (HTTP mode only). This timer
  counts between the end of the handshakes and the first byte of the HTTP
  request. This is reported in milliseconds and is equivalent to %Ti in
  log-format. See section 8.4 "Timing events" for more details.

req.timer.queue : integer
  Total time spent in the queues waiting for a connection slot.
  This is reported in milliseconds and is equivalent to %Tw in
  log-format. See section 8.4 "Timing events" for more details.

req.timer.tq : integer
  total time to get the client request from the accept date or since the
  emission of the last byte of the previous response.
  This is reported in milliseconds and is equivalent to %Tq in
  log-format. See section 8.4 "Timing events" for more details.

req.ver : string
req_ver : string (deprecated)
  Returns the version string from the HTTP request, for example "1.1". This can
  be useful for ACL. For logs use the "%HV" logformat alias. Some predefined
  ACL already check for versions 1.0 and 1.1.

  Common values are "1.0", "1.1", "2.0" or "3.0".

  In the case of http/2 and http/3, the value is not extracted from the HTTP
  version in the request line but is determined by the negotiated protocol
  version.

  ACL derivatives :
    req.ver : exact string match

request_date([<unit>]) : integer
  This is the exact date when the first byte of the HTTP request was received
  by HAProxy (log-format alias %tr). This is computed from accept_date +
  handshake time (%Th) + idle time (%Ti).

  Returns a value in number of seconds since epoch.

  <unit> is facultative, and can be set to "s" for seconds (default behavior),
  "ms" for  milliseconds or "us" for microseconds.
  If unit is set, return value is an integer reflecting either seconds,
  milliseconds or microseconds since epoch.
  It is useful when a time resolution of less than a second is needed.

res.body : binary
  This returns the HTTP response's available body as a block of data. Unlike
  the request side, there is no directive to wait for the response's body. This
  sample fetch is really useful (and usable) in the health-check context.

  It may be used in tcp-check based expect rules.

res.body_len : integer
  This returns the length of the HTTP response available body in bytes. Unlike
  the request side, there is no directive to wait for the response's body. This
  sample fetch is really useful (and usable) in the health-check context.

  It may be used in tcp-check based expect rules.

res.body_size : integer
  This returns the advertised length of the HTTP response body in bytes. It
  will represent the advertised Content-Length header, or the size of the
  available data in case of chunked encoding. Unlike the request side, there is
  no directive to wait for the response body. This sample fetch is really
  useful (and usable) in the health-check context.

  It may be used in tcp-check based expect rules.

res.cache_hit : boolean
  Returns the boolean "true" value if the response has been built out of an
  HTTP cache entry, otherwise returns boolean "false".

res.cache_name : string
  Returns a string containing the name of the HTTP cache that was used to
  build the HTTP response if res.cache_hit is true, otherwise returns an
  empty string.

res.comp : boolean
  Returns the boolean "true" value if the response has been compressed by
  HAProxy, otherwise returns boolean "false". This may be used to add
  information in the logs.

res.comp_algo : string
  Returns a string containing the name of the algorithm used if the response
  was compressed by HAProxy, for example : "deflate". This may be used to add
  some information in the logs.

res.cook([<name>]) : string
scook([<name>]) : string (deprecated)
  This extracts the last occurrence of the cookie name <name> on a "Set-Cookie"
  header line from the response, and returns its value as string. If no name is
  specified, the first cookie value is returned.

  It may be used in tcp-check based expect rules.

  ACL derivatives :
    res.scook([<name>] : exact string match

res.cook_cnt([<name>]) : integer
scook_cnt([<name>]) : integer (deprecated)
  Returns an integer value representing the number of occurrences of the cookie
  <name> in the response, or all cookies if <name> is not specified. This is
  mostly useful when combined with ACLs to detect suspicious responses.

  It may be used in tcp-check based expect rules.

res.cook_names([<delim>]) : string
  This builds a string made from the concatenation of all cookie names as they
  appear in the response (Set-Cookie headers) when the rule is evaluated. The
  default delimiter is the comma (',') but it may be overridden as an optional
  argument <delim>. In this case, only the first character of <delim> is
  considered.

  It may be used in tcp-check based expect rules.

res.cook_val([<name>]) : integer
scook_val([<name>]) : integer (deprecated)
  This extracts the last occurrence of the cookie name <name> on a "Set-Cookie"
  header line from the response, and converts its value to an integer which is
  returned. If no name is specified, the first cookie value is returned.

  It may be used in tcp-check based expect rules.

res.fhdr([<name>[,<occ>]]) : string
  This fetch works like the req.fhdr() fetch with the difference that it acts
  on the headers within an HTTP response.

  Like req.fhdr() the res.fhdr() fetch returns full values. If the header is
  defined to be a list you should use res.hdr().

  This fetch is sometimes useful with headers such as Date or Expires.

  It may be used in tcp-check based expect rules.

res.fhdr_cnt([<name>]) : integer
  This fetch works like the req.fhdr_cnt() fetch with the difference that it
  acts on the headers within an HTTP response.

  Like req.fhdr_cnt() the res.fhdr_cnt() fetch acts on full values. If the
  header is defined to be a list you should use res.hdr_cnt().

  It may be used in tcp-check based expect rules.

res.hdr([<name>[,<occ>]]) : string
shdr([<name>[,<occ>]]) : string (deprecated)
  This fetch works like the req.hdr() fetch with the difference that it acts
  on the headers within an HTTP response.

  Like req.hdr() the res.hdr() fetch considers the comma to be a delimiter. If
  this is not desired res.fhdr() should be used.

  It may be used in tcp-check based expect rules.

  ACL derivatives :
    res.hdr([<name>[,<occ>]])     : exact string match
    res.hdr_beg([<name>[,<occ>]]) : prefix match
    res.hdr_dir([<name>[,<occ>]]) : subdir match
    res.hdr_dom([<name>[,<occ>]]) : domain match
    res.hdr_end([<name>[,<occ>]]) : suffix match
    res.hdr_len([<name>[,<occ>]]) : length match
    res.hdr_reg([<name>[,<occ>]]) : regex match
    res.hdr_sub([<name>[,<occ>]]) : substring match

res.hdr_cnt([<name>]) : integer
shdr_cnt([<name>]) : integer (deprecated)
  This fetch works like the req.hdr_cnt() fetch with the difference that it
  acts on the headers within an HTTP response.

  Like req.hdr_cnt() the res.hdr_cnt() fetch considers the comma to be a
  delimiter. If this is not desired res.fhdr_cnt() should be used.

  It may be used in tcp-check based expect rules.

res.hdr_ip([<name>[,<occ>]]) : ip
shdr_ip([<name>[,<occ>]]) : ip (deprecated)
  This fetch works like the req.hdr_ip() fetch with the difference that it
  acts on the headers within an HTTP response.

  This can be useful to learn some data into a stick table.

  It may be used in tcp-check based expect rules.

res.hdr_names([<delim>]) : string
  This builds a string made from the concatenation of all header names as they
  appear in the response when the rule is evaluated. The default delimiter is
  the comma (',') but it may be overridden as an optional argument <delim>. In
  this case, only the first character of <delim> is considered.

  It may be used in tcp-check based expect rules.

res.hdr_val([<name>[,<occ>]]) : integer
shdr_val([<name>[,<occ>]]) : integer (deprecated)
  This fetch works like the req.hdr_val() fetch with the difference that it
  acts on the headers within an HTTP response.

  This can be useful to learn some data into a stick table.

  It may be used in tcp-check based expect rules.

res.hdrs : string
  Returns the current response headers as string including the last empty line
  separating headers from the request body. The last empty line can be used to
  detect a truncated header block. This sample fetch is useful for some SPOE
  headers analyzers and for advanced logging.

  It may also be used in tcp-check based expect rules.

res.hdrs_bin : binary
  Returns the current response headers contained in preparsed binary form. This
  is useful for offloading some processing with SPOE. It may be used in
  tcp-check based expect rules. Each string is described by a length followed
  by the number of bytes indicated in the length. The length is represented
  using the variable integer encoding detailed in the SPOE documentation. The
  end of the list is marked by a couple of empty header names and values
  (length of 0 for both).

  *(<str:header-name><str:header-value>)<empty string><empty string>

  int:  refer to the SPOE documentation for the encoding
  str:  <int:length><bytes>

res.timer.hdr : integer
  It's the time elapsed between the moment the TCP connection was established
  to the server and the moment the server sent its complete response headers.
  This is reported in milliseconds and is equivalent to %Tr in log-format. See
  section 8.4 "Timing events" for more details.

res.ver : string
resp_ver : string (deprecated)
  Returns the version string from the HTTP response, for example "1.1". This
  can be useful for logs, but is mostly there for ACL.

  It may be used in tcp-check based expect rules.

  ACL derivatives :
    resp.ver : exact string match

server_status : integer
  Return an integer containing the HTTP status code as received from the
  server. If no response was received from the server, the sample fetch fails.

set-cookie([<name>]) : string (deprecated)
  This extracts the last occurrence of the cookie name <name> on a "Set-Cookie"
  header line from the response and uses the corresponding value to match. This
  can be comparable to what "appsession" did with default options, but with
  support for multi-peer synchronization and state keeping across restarts.

  This fetch function is deprecated and has been superseded by the "res.cook"
  fetch. This keyword will disappear soon.

status : integer
  Returns an integer containing the HTTP status code in the HTTP response, for
  example, 302. It is mostly used within ACLs and integer ranges, for example,
  to remove any Location header if the response is not a 3xx. It will be the
  status code received by the client if it is not changed, via a 'set-status'
  action for instance.

  It may be used in tcp-check based expect rules.

txn.status : integer
  Return an integer containing the HTTP status code of the transaction, as
  reported in the log.

txn.timer.total : integer
  Total active time for the HTTP request, between the moment the proxy received
  the first byte of the request header and the emission of the last byte of the
  response body. This is the equivalent of %Ta in the log-format and is
  reported in milliseconds (ms).  For more information see Section 8.4 "Timing
  events"

unique-id : string
  Returns the unique-id attached to the request. The directive
  "unique-id-format" must be set. If it is not set, the unique-id sample fetch
  fails. Note that the unique-id is usually used with HTTP requests, however this
  sample fetch can be used with other protocols. Obviously, if it is used with
  other protocols than HTTP, the unique-id-format directive must not contain
  HTTP parts. See: unique-id-format and unique-id-header

url : string
  This extracts the request's URL as presented in the request. A typical use is
  with prefetch-capable caches, and with portals which need to aggregate
  multiple information from databases and keep them in caches. With ACLs, using
  "path" is preferred over using "url", because clients may send a full URL as
  is normally done with proxies. The only real use is to match "*" which does
  not match in "path", and for which there is already a predefined ACL. See
  also "path" and "base". Please note that any fragment reference in the URI
  ('#' after the path) is strictly forbidden by the HTTP standard and will be
  rejected. However, if the frontend receiving the request has "option
  accept-unsafe-violations-in-http-request", then this fragment part will be
  accepted and will also appear in the url.

  ACL derivatives :
    url     : exact string match
    url_beg : prefix match
    url_dir : subdir match
    url_dom : domain match
    url_end : suffix match
    url_len : length match
    url_reg : regex match
    url_sub : substring match

url32 : integer
  This returns a 32-bit hash of the value obtained by concatenating the first
  Host header and the whole URL including parameters (not only the path part of
  the request, as in the "base32" fetch above). This is useful to track per-URL
  activity. A shorter hash is stored, saving a lot of memory. The output type
  is an unsigned integer.

url32+src : binary
  This returns the concatenation of the "url32" fetch and the "src" fetch. The
  resulting type is of type binary, with a size of 8 or 20 bytes depending on
  the source address family. This can be used to track per-IP, per-URL counters.

url_ip : ip
  This extracts the IP address from the request's URL when the host part is
  presented as an IP address. Its use is very limited. For instance, a
  monitoring system might use this field as an alternative for the source IP in
  order to test what path a given source address would follow, or to force an
  entry in a table for a given source address. It may be used in combination
  with 'http-request set-dst' to emulate the older 'option http_proxy'.

url_port : integer
  This extracts the port part from the request's URL. Note that if the port is
  not specified in the request, port 80 is assumed..

urlp([<name>[,<delim>[,i]]]) : string
url_param([<name>[,<delim>[,i]]]) : string
  This extracts the first occurrence of the parameter <name> in the query
  string, which begins after either '?' or <delim>, and which ends before '&',
  ';' or <delim>. The parameter name is case-sensitive, unless"i" is added as a
  third argument. If no name is given, any parameter will match, and the first
  one will be returned. The result is a string corresponding to the value of the
  parameter <name> as presented in the request (no URL decoding is performed).
  This can be used for session stickiness based on a client ID, to extract an
  application cookie passed as a URL parameter, or in ACLs to apply some checks.
  Note that the ACL version of this fetch iterates over multiple parameters and
  will iteratively report all parameters values if no name is given

  ACL derivatives :
    urlp(<name>[,<delim>])     : exact string match
    urlp_beg(<name>[,<delim>]) : prefix match
    urlp_dir(<name>[,<delim>]) : subdir match
    urlp_dom(<name>[,<delim>]) : domain match
    urlp_end(<name>[,<delim>]) : suffix match
    urlp_len(<name>[,<delim>]) : length match
    urlp_reg(<name>[,<delim>]) : regex match
    urlp_sub(<name>[,<delim>]) : substring match


  Example :
      # match http://example.com/foo?PHPSESSIONID=some_id
      stick on urlp(PHPSESSIONID)
      # match http://example.com/foo;JSESSIONID=some_id
      stick on urlp(JSESSIONID,;)

urlp_val([<name>[,<delim>[,i]]]) : integer
  See "urlp" above. This one extracts the URL parameter <name> in the request
  and converts it to an integer value. This can be used for session stickiness
  based on a user ID for example, or with ACLs to match a page number or price.


7.3.7. Fetching samples for developers
---------------------------------------

This set of sample fetch methods is reserved to developers and must never be
used on a production environment, except on developer demand, for debugging
purposes. Moreover, no special care will be taken on backwards compatibility.
There is no warranty the following sample fetches will never change, be renamed
or simply removed. So be really careful if you should use one of them. To avoid
any ambiguity, these sample fetches are placed in the dedicated scope "internal",
for instance "internal.strm.is_htx".

Summary of sample fetch methods in this section and their respective types:

  keyword                                          output type
-------------------------------------------------+-------------
internal.htx.data                                  integer
internal.htx.free                                  integer
internal.htx.free_data                             integer
internal.htx.has_eom                               boolean
internal.htx.nbblks                                integer
internal.htx.size                                  integer
internal.htx.used                                  integer
internal.htx_blk.size(<idx>)                       integer
internal.htx_blk.type(<idx>)                       string
internal.htx_blk.data(<idx>)                       binary
internal.htx_blk.hdrname(<idx>)                    string
internal.htx_blk.hdrval(<idx>)                     string
internal.htx_blk.start_line(<idx>)                 string
internal.strm.is_htx                               boolean
-------------------------------------------------+-------------

Detailed list:

internal.htx.data : integer
  Returns the size in bytes used by data in the HTX message associated to a
  channel. The channel is chosen depending on the sample direction.

internal.htx.free : integer
  Returns the free space (size - used) in bytes in the HTX message associated
  to a channel. The channel is chosen depending on the sample direction.

internal.htx.free_data : integer
  Returns the free space for the data in bytes in the HTX message associated to
  a channel. The channel is chosen depending on the sample direction.

internal.htx.has_eom : boolean
  Returns true if the HTX message associated to a channel contains the
  end-of-message flag (EOM). Otherwise, it returns false. The channel is chosen
  depending on the sample direction.

internal.htx.nbblks : integer
  Returns the number of blocks present in the HTX message associated to a
  channel. The channel is chosen depending on the sample direction.

internal.htx.size : integer
  Returns the total size in bytes of the HTX message associated to a
  channel. The channel is chosen depending on the sample direction.

internal.htx.used : integer
  Returns the total size used in bytes (data + metadata) in the HTX message
  associated to a channel. The channel is chosen depending on the sample
  direction.

internal.htx_blk.size(<idx>) : integer
  Returns the size of the block at the position <idx> in the HTX message
  associated to a channel or 0 if it does not exist. The channel is chosen
  depending on the sample direction. <idx> may be any positive integer or one
  of the special value :
    * head  : The oldest inserted block
    * tail  : The newest inserted block
    * first : The first block where to (re)start the analysis

internal.htx_blk.type(<idx>) : string
  Returns the type of the block at the position <idx> in the HTX message
  associated to a channel or "HTX_BLK_UNUSED" if it does not exist. The channel
  is chosen depending on the sample direction. <idx> may be any positive
  integer or one of the special value :
    * head  : The oldest inserted block
    * tail  : The newest inserted block
    * first : The first block where to (re)start the analysis

internal.htx_blk.data(<idx>) : binary
  Returns the value of the DATA block at the position <idx> in the HTX message
  associated to a channel or an empty string if it does not exist or if it is
  not a DATA block. The channel is chosen depending on the sample direction.
  <idx> may be any positive integer or one of the special value :

    * head  : The oldest inserted block
    * tail  : The newest inserted block
    * first : The first block where to (re)start the analysis

internal.htx_blk.hdrname(<idx>) : string
  Returns the header name of the HEADER block at the position <idx> in the HTX
  message associated to a channel or an empty string if it does not exist or if
  it is not an HEADER block. The channel is chosen depending on the sample
  direction.  <idx> may be any positive integer or one of the special value :

    * head  : The oldest inserted block
    * tail  : The newest inserted block
    * first : The first block where to (re)start the analysis

internal.htx_blk.hdrval(<idx>) : string
  Returns the header value of the HEADER block at the position <idx> in the HTX
  message associated to a channel or an empty string if it does not exist or if
  it is not an HEADER block. The channel is chosen depending on the sample
  direction.  <idx> may be any positive integer or one of the special value :

    * head  : The oldest inserted block
    * tail  : The newest inserted block
    * first : The first block where to (re)start the analysis

internal.htx_blk.start_line(<idx>) : string
  Returns the value of the REQ_SL or RES_SL block at the position <idx> in the
  HTX message associated to a channel or an empty string if it does not exist
  or if it is not a SL block. The channel is chosen depending on the sample
  direction.  <idx> may be any positive integer or one of the special value :

    * head  : The oldest inserted block
    * tail  : The newest inserted block
    * first : The first block where to (re)start the analysis

internal.strm.is_htx : boolean
  Returns true if the current stream is an HTX stream. It means the data in the
  channels buffers are stored using the internal HTX representation. Otherwise,
  it returns false.


7.4. Pre-defined ACLs
---------------------

Some predefined ACLs are hard-coded so that they do not have to be declared in
every frontend which needs them. They all have their names in upper case in
order to avoid confusion. Their equivalence is provided below.

ACL name          Equivalent to                Usage
---------------+----------------------------------+------------------------------------------------------
FALSE            always_false                       never match
HTTP             req.proto_http                     match if request protocol is valid HTTP
HTTP_1.0         req.ver 1.0                        match if HTTP request version is 1.0
HTTP_1.1         req.ver 1.1                        match if HTTP request version is 1.1
HTTP_2.0         req.ver 2.0                        match if HTTP request version is 2.0
HTTP_3.0         req.ver 3.0                        match if HTTP request version is 3.0
HTTP_CONTENT     req.hdr_val(content-length) gt 0   match an existing content-length in the HTTP request
HTTP_URL_ABS     url_reg ^[^/:]*://                 match absolute URL with scheme
HTTP_URL_SLASH   url_beg /                          match URL beginning with "/"
HTTP_URL_STAR    url     *                          match URL equal to "*"
LOCALHOST        src 127.0.0.1/8 ::1                match connection from local host
METH_CONNECT     method  CONNECT                    match HTTP CONNECT method
METH_DELETE      method  DELETE                     match HTTP DELETE method
METH_GET         method  GET HEAD                   match HTTP GET or HEAD method
METH_HEAD        method  HEAD                       match HTTP HEAD method
METH_OPTIONS     method  OPTIONS                    match HTTP OPTIONS method
METH_POST        method  POST                       match HTTP POST method
METH_PUT         method  PUT                        match HTTP PUT method
METH_TRACE       method  TRACE                      match HTTP TRACE method
RDP_COOKIE       req.rdp_cookie_cnt gt 0            match presence of an RDP cookie in the request buffer
REQ_CONTENT      req.len gt 0                       match data in the request buffer
TRUE             always_true                        always match
WAIT_END         wait_end                           wait for end of content analysis
---------------+----------------------------------+------------------------------------------------------


8. Logging
----------

One of HAProxy's strong points certainly lies is its precise logs. It probably
provides the finest level of information available for such a product, which is
very important for troubleshooting complex environments. Standard information
provided in logs include client ports, TCP/HTTP state timers, precise stream
state at termination and precise termination cause, information about decisions
to direct traffic to a server, and of course the ability to capture arbitrary
headers.

In order to improve administrators reactivity, it offers a great transparency
about encountered problems, both internal and external, and it is possible to
send logs to different sources at the same time with different level filters :

  - global process-level logs (system errors, start/stop, etc..)
  - per-instance system and internal errors (lack of resource, bugs, ...)
  - per-instance external troubles (servers up/down, max connections)
  - per-instance activity (client connections), either at the establishment or
    at the termination.
  - per-request control of log-level, e.g.
        http-request set-log-level silent if sensitive_request

The ability to distribute different levels of logs to different log servers
allow several production teams to interact and to fix their problems as soon
as possible. For example, the system team might monitor system-wide errors,
while the application team might be monitoring the up/down for their servers in
real time, and the security team might analyze the activity logs with one hour
delay.


8.1. Log levels
---------------

TCP and HTTP connections can be logged with information such as the date, time,
source IP address, destination address, connection duration, response times,
HTTP request, HTTP return code, number of bytes transmitted, conditions
in which the stream ended, and even exchanged cookies values. For example
track a particular user's problems. All messages may be sent to up to two
syslog servers. Check the "log" keyword in section 4.2 for more information
about log facilities.


8.2. Log formats
----------------

HAProxy supports 5 log formats. Several fields are common between these formats
and will be detailed in the following sections. A few of them may vary
slightly with the configuration, due to indicators specific to certain
options. The supported formats are as follows :

  - the default format, which is very basic and very rarely used. It only
    provides very basic information about the incoming connection at the moment
    it is accepted : source IP:port, destination IP:port, and frontend-name.
    This mode will eventually disappear so it will not be described to great
    extents.

  - the TCP format, which is more advanced. This format is enabled when "option
    tcplog" is set on the frontend. HAProxy will then usually wait for the
    connection to terminate before logging. This format provides much richer
    information, such as timers, connection counts, queue size, etc... This
    format is recommended for pure TCP proxies.

  - the HTTP format, which is the most advanced for HTTP proxying. This format
    is enabled when "option httplog" is set on the frontend. It provides the
    same information as the TCP format with some HTTP-specific fields such as
    the request, the status code, and captures of headers and cookies. This
    format is recommended for HTTP proxies.

  - the CLF HTTP format, which is equivalent to the HTTP format, but with the
    fields arranged in the same order as the CLF format. In this mode, all
    timers, captures, flags, etc... appear one per field after the end of the
    common fields, in the same order they appear in the standard HTTP format.

  - the custom log format, allows you to make your own log line.

Next sections will go deeper into details for each of these formats. Format
specification will be performed on a "field" basis. Unless stated otherwise, a
field is a portion of text delimited by any number of spaces. Since syslog
servers are susceptible of inserting fields at the beginning of a line, it is
always assumed that the first field is the one containing the process name and
identifier.

Note : Since log lines may be quite long, the log examples in sections below
       might be broken into multiple lines. The example log lines will be
       prefixed with 3 closing angle brackets ('>>>') and each time a log is
       broken into multiple lines, each non-final line will end with a
       backslash ('\') and the next line will start indented by two characters.


8.2.1. Default log format
-------------------------

This format is used when no specific option is set. The log is emitted as soon
as the connection is accepted. One should note that this currently is the only
format which logs the request's destination IP and ports.

  Example :
        listen www
            mode http
            log global
            server srv1 127.0.0.1:8000

    >>> Feb  6 12:12:09 localhost \
          haproxy[14385]: Connect from 10.0.1.2:33312 to 10.0.3.31:8012 \
          (www/HTTP)

  Field   Format                                Extract from the example above
      1   process_name '[' pid ']:'                            haproxy[14385]:
      2   'Connect from'                                          Connect from
      3   source_ip ':' source_port                             10.0.1.2:33312
      4   'to'                                                              to
      5   destination_ip ':' destination_port                   10.0.3.31:8012
      6   '(' frontend_name '/' mode ')'                            (www/HTTP)

Detailed fields description :
  - "source_ip" is the IP address of the client which initiated the connection.
  - "source_port" is the TCP port of the client which initiated the connection.
  - "destination_ip" is the IP address the client connected to.
  - "destination_port" is the TCP port the client connected to.
  - "frontend_name" is the name of the frontend (or listener) which received
    and processed the connection.
  - "mode is the mode the frontend is operating (TCP or HTTP).

In case of a UNIX socket, the source and destination addresses are marked as
"unix:" and the ports reflect the internal ID of the socket which accepted the
connection (the same ID as reported in the stats).

It is advised not to use this deprecated format for newer installations as it
will eventually disappear.


8.2.2. TCP log format
---------------------

The TCP format is used when "option tcplog" is specified in the frontend, and
is the recommended format for pure TCP proxies. It provides a lot of precious
information for troubleshooting. Since this format includes timers and byte
counts, the log is normally emitted at the end of the session. It can be
emitted earlier if "option logasap" is specified, which makes sense in most
environments with long sessions such as remote terminals. Sessions which match
the "monitor" rules are never logged. It is also possible not to emit logs for
sessions for which no data were exchanged between the client and the server, by
specifying "option dontlognull" in the frontend. Successful connections will
not be logged if "option dontlog-normal" is specified in the frontend.

The TCP log format is internally declared as a custom log format based on the
exact following string, which may also be used as a basis to extend the format
if required. Additionally the HAPROXY_TCP_LOG_FMT variable can be used instead.
Refer to section 8.2.6 "Custom log format" to see how to use this:

    # strict equivalent of "option tcplog"
    log-format "%ci:%cp [%t] %ft %b/%s %Tw/%Tc/%Tt %B %ts \
                %ac/%fc/%bc/%sc/%rc %sq/%bq"
    # or using the HAPROXY_TCP_LOG_FMT variable
    log-format "${HAPROXY_TCP_LOG_FMT}"

And the CLF log format is internally declared as a custom log format based on
this exact string:

    # strict equivalent of "option tcplog clf"
    log-format "%{Q}o %{-Q}ci - - [%T] \"TCP \" 000 %B \"\" \"\" %cp \
                %ms %ft %b %s %Th %Tw %Tc %Tt %U %ts-- %ac %fc %bc \
                %sc %rc %sq %bq \"\" \"\" "

A few fields may slightly vary depending on some configuration options, those
are marked with a star ('*') after the field name below.

  Example :
        frontend fnt
            mode tcp
            option tcplog
            log global
            default_backend bck

        backend bck
            server srv1 127.0.0.1:8000

    >>> Feb  6 12:12:56 localhost \
          haproxy[14387]: 10.0.1.2:33313 [06/Feb/2009:12:12:51.443] fnt \
          bck/srv1 0/0/5007 212 -- 0/0/0/0/3 0/0

  Field   Format                                Extract from the example above
      1   process_name '[' pid ']:'                            haproxy[14387]:
      2   client_ip ':' client_port                             10.0.1.2:33313
      3   '[' accept_date ']'                       [06/Feb/2009:12:12:51.443]
      4   frontend_name                                                    fnt
      5   backend_name '/' server_name                                bck/srv1
      6   Tw '/' Tc '/' Tt*                                           0/0/5007
      7   bytes_read*                                                      212
      8   termination_state                                                 --
      9   actconn '/' feconn '/' beconn '/' srv_conn '/' retries*    0/0/0/0/3
     10   srv_queue '/' backend_queue                                      0/0

Detailed fields description :
  - "client_ip" is the IP address of the client which initiated the TCP
    connection to HAProxy. If the connection was accepted on a UNIX socket
    instead, the IP address would be replaced with the word "unix". Note that
    when the connection is accepted on a socket configured with "accept-proxy"
    and the PROXY protocol is correctly used, or with a "accept-netscaler-cip"
    and the NetScaler Client IP insertion protocol is correctly used, then the
    logs will reflect the forwarded connection's information.

  - "client_port" is the TCP port of the client which initiated the connection.
    If the connection was accepted on a UNIX socket instead, the port would be
    replaced with the ID of the accepting socket, which is also reported in the
    stats interface.

  - "accept_date" is the exact date when the connection was received by HAProxy
    (which might be very slightly different from the date observed on the
    network if there was some queuing in the system's backlog). This is usually
    the same date which may appear in any upstream firewall's log. When used in
    HTTP mode, the accept_date field will be reset to the first moment the
    connection is ready to receive a new request (end of previous response for
    HTTP/1, immediately after previous request for HTTP/2).

  - "frontend_name" is the name of the frontend (or listener) which received
    and processed the connection.

  - "backend_name" is the name of the backend (or listener) which was selected
    to manage the connection to the server. This will be the same as the
    frontend if no switching rule has been applied, which is common for TCP
    applications.

  - "server_name" is the name of the last server to which the connection was
    sent, which might differ from the first one if there were connection errors
    and a redispatch occurred. Note that this server belongs to the backend
    which processed the request. If the connection was aborted before reaching
    a server, "<NOSRV>" is indicated instead of a server name.

  - "Tw" is the total time in milliseconds spent waiting in the various queues.
    It can be "-1" if the connection was aborted before reaching the queue.
    See "Timers" below for more details.

  - "Tc" is the total time in milliseconds spent waiting for the connection to
    establish to the final server, including retries. It can be "-1" if the
    connection was aborted before a connection could be established. See
    "Timers" below for more details.

  - "Tt" is the total time in milliseconds elapsed between the accept and the
    last close. It covers all possible processing. There is one exception, if
    "option logasap" was specified, then the time counting stops at the moment
    the log is emitted. In this case, a '+' sign is prepended before the value,
    indicating that the final one will be larger. See "Timers" below for more
    details.

  - "bytes_read" is the total number of bytes transmitted from the server to
    the client when the log is emitted. If "option logasap" is specified, the
    this value will be prefixed with a '+' sign indicating that the final one
    may be larger. Please note that this value is a 64-bit counter, so log
    analysis tools must be able to handle it without overflowing.

  - "termination_state" is the condition the session was in when the session
    ended. This indicates the session state, which side caused the end of
    session to happen, and for what reason (timeout, error, ...). The normal
    flags should be "--", indicating the session was closed by either end with
    no data remaining in buffers. See below "Stream state at disconnection"
    for more details.

  - "actconn" is the total number of concurrent connections on the process when
    the session was logged. It is useful to detect when some per-process system
    limits have been reached. For instance, if actconn is close to 512 when
    multiple connection errors occur, chances are high that the system limits
    the process to use a maximum of 1024 file descriptors and that all of them
    are used. See section 3 "Global parameters" to find how to tune the system.

  - "feconn" is the total number of concurrent connections on the frontend when
    the session was logged. It is useful to estimate the amount of resource
    required to sustain high loads, and to detect when the frontend's "maxconn"
    has been reached. Most often when this value increases by huge jumps, it is
    because there is congestion on the backend servers, but sometimes it can be
    caused by a denial of service attack.

  - "beconn" is the total number of concurrent connections handled by the
    backend when the session was logged. It includes the total number of
    concurrent connections active on servers as well as the number of
    connections pending in queues. It is useful to estimate the amount of
    additional servers needed to support high loads for a given application.
    Most often when this value increases by huge jumps, it is because there is
    congestion on the backend servers, but sometimes it can be caused by a
    denial of service attack.

  - "srv_conn" is the total number of concurrent connections still active on
    the server when the session was logged. It can never exceed the server's
    configured "maxconn" parameter. If this value is very often close or equal
    to the server's "maxconn", it means that traffic regulation is involved a
    lot, meaning that either the server's maxconn value is too low, or that
    there aren't enough servers to process the load with an optimal response
    time. When only one of the server's "srv_conn" is high, it usually means
    that this server has some trouble causing the connections to take longer to
    be processed than on other servers.

  - "retries" is the number of connection retries experienced by this session
    when trying to connect to the server. It must normally be zero, unless a
    server is being stopped at the same moment the connection was attempted.
    Frequent retries generally indicate either a network problem between
    HAProxy and the server, or a misconfigured system backlog on the server
    preventing new connections from being queued. This field may optionally be
    prefixed with a '+' sign, indicating that the session has experienced a
    redispatch after the maximal retry count has been reached on the initial
    server. In this case, the server name appearing in the log is the one the
    connection was redispatched to, and not the first one, though both may
    sometimes be the same in case of hashing for instance. So as a general rule
    of thumb, when a '+' is present in front of the retry count, this count
    should not be attributed to the logged server.

  - "srv_queue" is the total number of requests which were processed before
    this one in the server queue. It is zero when the request has not gone
    through the server queue. It makes it possible to estimate the approximate
    server's response time by dividing the time spent in queue by the number of
    requests in the queue. It is worth noting that if a session experiences a
    redispatch and passes through two server queues, their positions will be
    cumulative. A request should not pass through both the server queue and the
    backend queue unless a redispatch occurs.

  - "backend_queue" is the total number of requests which were processed before
    this one in the backend's global queue. It is zero when the request has not
    gone through the global queue. It makes it possible to estimate the average
    queue length, which easily translates into a number of missing servers when
    divided by a server's "maxconn" parameter. It is worth noting that if a
    session experiences a redispatch, it may pass twice in the backend's queue,
    and then both positions will be cumulative. A request should not pass
    through both the server queue and the backend queue unless a redispatch
    occurs.


8.2.3. HTTP log format
----------------------

The HTTP format is the most complete and the best suited for HTTP proxies. It
is enabled by when "option httplog" is specified in the frontend. It provides
the same level of information as the TCP format with additional features which
are specific to the HTTP protocol. Just like the TCP format, the log is usually
emitted at the end of the stream, unless "option logasap" is specified, which
generally only makes sense for download sites. A stream which matches the
"monitor" rules will never logged. It is also possible not to log streams for
which no data were sent by the client by specifying "option dontlognull" in the
frontend. Successful connections will not be logged if "option dontlog-normal"
is specified in the frontend.

The HTTP log format is internally declared as a custom log format based on the
exact following string, which may also be used as a basis to extend the format
if required. Additionally the HAPROXY_HTTP_LOG_FMT variable can be used
instead. Refer to section 8.2.6 "Custom log format" to see how to use this:

    # strict equivalent of "option httplog"
    log-format "%ci:%cp [%tr] %ft %b/%s %TR/%Tw/%Tc/%Tr/%Ta %ST %B %CC \
                %CS %tsc %ac/%fc/%bc/%sc/%rc %sq/%bq %hr %hs %{+Q}r"
    # or using the HAPROXY_HTTP_LOG_FMT variable
    log-format "${HAPROXY_HTTP_LOG_FMT}"

And the CLF log format is internally declared as a custom log format based on
this exact string:

    # strict equivalent of "option httplog clf"
    log-format "%{+Q}o %{-Q}ci - - [%trg] %r %ST %B \"\" \"\" %cp \
                %ms %ft %b %s %TR %Tw %Tc %Tr %Ta %tsc %ac %fc \
                %bc %sc %rc %sq %bq %CC %CS %hrl %hsl"

Most fields are shared with the TCP log, some being different. A few fields may
slightly vary depending on some configuration options. Those ones are marked
with a star ('*') after the field name below.

  Example :
        frontend http-in
            mode http
            option httplog
            log global
            default_backend bck

        backend static
            server srv1 127.0.0.1:8000

    >>> Feb  6 12:14:14 localhost \
          haproxy[14389]: 10.0.1.2:33317 [06/Feb/2009:12:14:14.655] http-in \
          static/srv1 10/0/30/69/109 200 2750 - - ---- 1/1/1/1/0 0/0 {1wt.eu} \
          {} "GET /index.html HTTP/1.1"

  Field   Format                                Extract from the example above
      1   process_name '[' pid ']:'                            haproxy[14389]:
      2   client_ip ':' client_port                             10.0.1.2:33317
      3   '[' request_date ']'                      [06/Feb/2009:12:14:14.655]
      4   frontend_name                                                http-in
      5   backend_name '/' server_name                             static/srv1
      6   TR '/' Tw '/' Tc '/' Tr '/' Ta*                       10/0/30/69/109
      7   status_code                                                      200
      8   bytes_read*                                                     2750
      9   captured_request_cookie                                            -
     10   captured_response_cookie                                           -
     11   termination_state                                               ----
     12   actconn '/' feconn '/' beconn '/' srv_conn '/' retries*    1/1/1/1/0
     13   srv_queue '/' backend_queue                                      0/0
     14   '{' captured_request_headers* '}'                   {haproxy.1wt.eu}
     15   '{' captured_response_headers* '}'                                {}
     16   '"' http_request '"'                      "GET /index.html HTTP/1.1"

Detailed fields description :
  - "client_ip" is the IP address of the client which initiated the TCP
    connection to HAProxy. If the connection was accepted on a UNIX socket
    instead, the IP address would be replaced with the word "unix". Note that
    when the connection is accepted on a socket configured with "accept-proxy"
    and the PROXY protocol is correctly used, or with a "accept-netscaler-cip"
    and the NetScaler Client IP insertion protocol is correctly used, then the
    logs will reflect the forwarded connection's information.

  - "client_port" is the TCP port of the client which initiated the connection.
    If the connection was accepted on a UNIX socket instead, the port would be
    replaced with the ID of the accepting socket, which is also reported in the
    stats interface.

  - "request_date" is the exact date when the first byte of the HTTP request
    was received by HAProxy (log field %tr).

  - "frontend_name" is the name of the frontend (or listener) which received
    and processed the connection.

  - "backend_name" is the name of the backend (or listener) which was selected
    to manage the connection to the server. This will be the same as the
    frontend if no switching rule has been applied.

  - "server_name" is the name of the last server to which the connection was
    sent, which might differ from the first one if there were connection errors
    and a redispatch occurred. Note that this server belongs to the backend
    which processed the request. If the request was aborted before reaching a
    server, "<NOSRV>" is indicated instead of a server name. If the request was
    intercepted by the stats subsystem, "<STATS>" is indicated instead.

  - "TR" is the total time in milliseconds spent waiting for a full HTTP
    request from the client (not counting body) after the first byte was
    received. It can be "-1" if the connection was aborted before a complete
    request could be received or a bad request was received. It should
    always be very small because a request generally fits in one single packet.
    Large times here generally indicate network issues between the client and
    HAProxy or requests being typed by hand. See section 8.4 "Timing Events"
    for more details.

  - "Tw" is the total time in milliseconds spent waiting in the various queues.
    It can be "-1" if the connection was aborted before reaching the queue.
    See section 8.4 "Timing Events" for more details.

  - "Tc" is the total time in milliseconds spent waiting for the connection to
    establish to the final server, including retries. It can be "-1" if the
    request was aborted before a connection could be established. See section
    8.4 "Timing Events" for more details.

  - "Tr" is the total time in milliseconds spent waiting for the server to send
    a full HTTP response, not counting data. It can be "-1" if the request was
    aborted before a complete response could be received. It generally matches
    the server's processing time for the request, though it may be altered by
    the amount of data sent by the client to the server. Large times here on
    "GET" requests generally indicate an overloaded server. See section 8.4
    "Timing Events" for more details.

  - "Ta" is the time the request remained active in HAProxy, which is the total
    time in milliseconds elapsed between the first byte of the request was
    received and the last byte of response was sent. It covers all possible
    processing except the handshake (see Th) and idle time (see Ti). There is
    one exception, if "option logasap" was specified, then the time counting
    stops at the moment the log is emitted. In this case, a '+' sign is
    prepended before the value, indicating that the final one will be larger.
    See section 8.4 "Timing Events" for more details.

  - "status_code" is the HTTP status code returned to the client. This status
    is generally set by the server, but it might also be set by HAProxy when
    the server cannot be reached or when its response is blocked by HAProxy.

  - "bytes_read" is the total number of bytes transmitted to the client when
    the log is emitted. This does include HTTP headers. If "option logasap" is
    specified, this value will be prefixed with a '+' sign indicating that
    the final one may be larger. Please note that this value is a 64-bit
    counter, so log analysis tools must be able to handle it without
    overflowing.

  - "captured_request_cookie" is an optional "name=value" entry indicating that
    the client had this cookie in the request. The cookie name and its maximum
    length are defined by the "capture cookie" statement in the frontend
    configuration. The field is a single dash ('-') when the option is not
    set. Only one cookie may be captured, it is generally used to track session
    ID exchanges between a client and a server to detect session crossing
    between clients due to application bugs. For more details, please consult
    the section "Capturing HTTP headers and cookies" below.

  - "captured_response_cookie" is an optional "name=value" entry indicating
    that the server has returned a cookie with its response. The cookie name
    and its maximum length are defined by the "capture cookie" statement in the
    frontend configuration. The field is a single dash ('-') when the option is
    not set. Only one cookie may be captured, it is generally used to track
    session ID exchanges between a client and a server to detect session
    crossing between clients due to application bugs. For more details, please
    consult the section "Capturing HTTP headers and cookies" below.

  - "termination_state" is the condition the stream was in when the stream
    ended. This indicates the stream state, which side caused the end of
    stream to happen, for what reason (timeout, error, ...), just like in TCP
    logs, and information about persistence operations on cookies in the last
    two characters. The normal flags should begin with "--", indicating the
    stream was closed by either end with no data remaining in buffers. See
    below "Stream state at disconnection" for more details.

  - "actconn" is the total number of concurrent connections on the process when
    the stream was logged. It is useful to detect when some per-process system
    limits have been reached. For instance, if actconn is close to 512 or 1024
    when multiple connection errors occur, chances are high that the system
    limits the process to use a maximum of 1024 file descriptors and that all
    of them are used. See section 3 "Global parameters" to find how to tune the
    system.

  - "feconn" is the total number of concurrent connections on the frontend when
    the stream was logged. It is useful to estimate the amount of resource
    required to sustain high loads, and to detect when the frontend's "maxconn"
    has been reached. Most often when this value increases by huge jumps, it is
    because there is congestion on the backend servers, but sometimes it can be
    caused by a denial of service attack.

  - "beconn" is the total number of concurrent connections handled by the
    backend when the stream was logged. It includes the total number of
    concurrent connections active on servers as well as the number of
    connections pending in queues. It is useful to estimate the amount of
    additional servers needed to support high loads for a given application.
    Most often when this value increases by huge jumps, it is because there is
    congestion on the backend servers, but sometimes it can be caused by a
    denial of service attack.

  - "srv_conn" is the total number of concurrent connections still active on
    the server when the stream was logged. It can never exceed the server's
    configured "maxconn" parameter. If this value is very often close or equal
    to the server's "maxconn", it means that traffic regulation is involved a
    lot, meaning that either the server's maxconn value is too low, or that
    there aren't enough servers to process the load with an optimal response
    time. When only one of the server's "srv_conn" is high, it usually means
    that this server has some trouble causing the requests to take longer to be
    processed than on other servers.

  - "retries" is the number of connection retries experienced by this stream
    when trying to connect to the server. It must normally be zero, unless a
    server is being stopped at the same moment the connection was attempted.
    Frequent retries generally indicate either a network problem between
    HAProxy and the server, or a misconfigured system backlog on the server
    preventing new connections from being queued. This field may optionally be
    prefixed with a '+' sign, indicating that the stream has experienced a
    redispatch after the maximal retry count has been reached on the initial
    server. In this case, the server name appearing in the log is the one the
    connection was redispatched to, and not the first one, though both may
    sometimes be the same in case of hashing for instance. So as a general rule
    of thumb, when a '+' is present in front of the retry count, this count
    should not be attributed to the logged server.

  - "srv_queue" is the total number of requests which were processed before
    this one in the server queue. It is zero when the request has not gone
    through the server queue. It makes it possible to estimate the approximate
    server's response time by dividing the time spent in queue by the number of
    requests in the queue. It is worth noting that if a stream experiences a
    redispatch and passes through two server queues, their positions will be
    cumulative. A request should not pass through both the server queue and the
    backend queue unless a redispatch occurs.

  - "backend_queue" is the total number of requests which were processed before
    this one in the backend's global queue. It is zero when the request has not
    gone through the global queue. It makes it possible to estimate the average
    queue length, which easily translates into a number of missing servers when
    divided by a server's "maxconn" parameter. It is worth noting that if a
    stream experiences a redispatch, it may pass twice in the backend's queue,
    and then both positions will be cumulative. A request should not pass
    through both the server queue and the backend queue unless a redispatch
    occurs.

  - "captured_request_headers" is a list of headers captured in the request due
    to the presence of the "capture request header" statement in the frontend.
    Multiple headers can be captured, they will be delimited by a vertical bar
    ('|'). When no capture is enabled, the braces do not appear, causing a
    shift of remaining fields. It is important to note that this field may
    contain spaces, and that using it requires a smarter log parser than when
    it's not used. Please consult the section "Capturing HTTP headers and
    cookies" below for more details.

  - "captured_response_headers" is a list of headers captured in the response
    due to the presence of the "capture response header" statement in the
    frontend. Multiple headers can be captured, they will be delimited by a
    vertical bar ('|'). When no capture is enabled, the braces do not appear,
    causing a shift of remaining fields. It is important to note that this
    field may contain spaces, and that using it requires a smarter log parser
    than when it's not used. Please consult the section "Capturing HTTP headers
    and cookies" below for more details.

  - "http_request" is the complete HTTP request line, including the method,
    request and HTTP version string. Non-printable characters are encoded (see
    below the section "Non-printable characters"). This is always the last
    field, and it is always delimited by quotes and is the only one which can
    contain quotes. If new fields are added to the log format, they will be
    added before this field. This field might be truncated if the request is
    huge and does not fit in the standard syslog buffer (1024 characters). This
    is the reason why this field must always remain the last one.


8.2.4. HTTPS log format
----------------------

The HTTPS format is the best suited for HTTP over SSL connections. It is an
extension of the HTTP format (see section 8.2.3) to which SSL related
information are added. It is enabled when "option httpslog" is specified in the
frontend. Just like the TCP and HTTP formats, the log is usually emitted at the
end of the stream, unless "option logasap" is specified. A stream which
matches the "monitor" rules will never logged. It is also possible not to log
streams for which no data were sent by the client by specifying "option
dontlognull" in the frontend. Successful connections will not be logged if
"option dontlog-normal" is specified in the frontend.

The HTTPS log format is internally declared as a custom log format based on the
exact following string, which may also be used as a basis to extend the format
if required. Additionally the HAPROXY_HTTPS_LOG_FMT variable can be used
instead. Refer to section 8.2.6 "Custom log format" to see how to use this:

    # strict equivalent of "option httpslog"
    log-format "%ci:%cp [%tr] %ft %b/%s %TR/%Tw/%Tc/%Tr/%Ta %ST %B %CC \
               %CS %tsc %ac/%fc/%bc/%sc/%rc %sq/%bq %hr %hs %{+Q}r \
               %[fc_err]/%[ssl_fc_err,hex]/%[ssl_c_err]/\
               %[ssl_c_ca_err]/%[ssl_fc_is_resumed] %[ssl_fc_sni]/%sslv/%sslc"
    # or using the HAPROXY_HTTPS_LOG_FMT variable
    log-format "${HAPROXY_HTTPS_LOG_FMT}"

This format is basically the HTTP one (see section 8.2.3) with new fields
appended to it. The new fields (lines 17 and 18) will be detailed here. For the
HTTP ones, refer to the HTTP section.

  Example :
        frontend https-in
            mode http
            option httpslog
            log global
            bind *:443 ssl crt mycerts/srv.pem ...
            default_backend bck

        backend static
            server srv1 127.0.0.1:8000 ssl crt mycerts/clt.pem ...

    >>> Feb  6 12:14:14 localhost \
          haproxy[14389]: 10.0.1.2:33317 [06/Feb/2009:12:14:14.655] https-in \
          static/srv1 10/0/30/69/109 200 2750 - - ---- 1/1/1/1/0 0/0 {1wt.eu} \
          {} "GET /index.html HTTP/1.1" 0/0/0/0/0 \
          1wt.eu/TLSv1.3/TLS_AES_256_GCM_SHA384

  Field   Format                                  Extract from the example above
      1   process_name '[' pid ']:'                              haproxy[14389]:
      2   client_ip ':' client_port                               10.0.1.2:33317
      3   '[' request_date ']'                        [06/Feb/2009:12:14:14.655]
      4   frontend_name                                                 https-in
      5   backend_name '/' server_name                               static/srv1
      6   TR '/' Tw '/' Tc '/' Tr '/' Ta*                         10/0/30/69/109
      7   status_code                                                        200
      8   bytes_read*                                                       2750
      9   captured_request_cookie                                              -
     10   captured_response_cookie                                             -
     11   termination_state                                                 ----
     12   actconn '/' feconn '/' beconn '/' srv_conn '/' retries*      1/1/1/1/0
     13   srv_queue '/' backend_queue                                        0/0
     14   '{' captured_request_headers* '}'                     {haproxy.1wt.eu}
     15   '{' captured_response_headers* '}'                                  {}
     16   '"' http_request '"'                        "GET /index.html HTTP/1.1"
     17   fc_err '/' ssl_fc_err '/' ssl_c_err
          '/' ssl_c_ca_err '/' ssl_fc_is_resumed                       0/0/0/0/0
     18   ssl_fc_sni '/' ssl_version
          '/' ssl_ciphers                  1wt.eu/TLSv1.3/TLS_AES_256_GCM_SHA384

Detailed fields description :
  - "fc_err" is the status of the connection on the frontend's side. It
    corresponds to the "fc_err" sample fetch. See the "fc_err" and "fc_err_str"
    sample fetch functions for more information.

  - "ssl_fc_err" is the last error of the first SSL error stack that was
    raised on the connection from the frontend's perspective. It might be used
    to detect SSL handshake errors for instance. It will be 0 if everything
    went well. See the "ssl_fc_err" sample fetch's description for more
    information.

  - "ssl_c_err" is the status of the client's certificate verification process.
    The handshake might be successful while having a non-null verification
    error code if it is an ignored one. See the "ssl_c_err" sample fetch and
    the "crt-ignore-err" option.

  - "ssl_c_ca_err" is the status of the client's certificate chain verification
    process.  The handshake might be successful while having a non-null
    verification error code if it is an ignored one. See the "ssl_c_ca_err"
    sample fetch and the "ca-ignore-err" option.

  - "ssl_fc_is_resumed" is true if the incoming TLS session was resumed with
    the stateful cache or a stateless ticket. Don't forgot that a TLS session
    can be shared by multiple requests.

  - "ssl_fc_sni" is the SNI (Server Name Indication) presented by the client
    to select the certificate to be used. It usually matches the host name for
    the first request of a connection. An absence of this field may indicate
    that the SNI was not sent by the client, and will lead haproxy to use the
    default certificate, or to reject the connection in case of strict-sni.

  - "ssl_version" is the SSL version of the frontend.

  - "ssl_ciphers" is the SSL cipher used for the connection.


8.2.5. Error log format
-----------------------

When an incoming connection fails due to an SSL handshake or an invalid PROXY
protocol header, HAProxy will log the event using a shorter, fixed line format,
unless a dedicated error log format is defined through an "error-log-format"
line. By default, logs are emitted at the LOG_INFO level, unless the option
"log-separate-errors" is set in the backend, in which case the LOG_ERR level
will be used. Connections on which no data are exchanged (e.g. probes) are not
logged if the "dontlognull" option is set.

The default format looks like this :

    >>> Dec  3 18:27:14 localhost \
          haproxy[6103]: 127.0.0.1:56059 [03/Dec/2012:17:35:10.380] frt/f1: \
          Connection error during SSL handshake

  Field   Format                                Extract from the example above
      1   process_name '[' pid ']:'                             haproxy[6103]:
      2   client_ip ':' client_port                            127.0.0.1:56059
      3   '[' accept_date ']'                       [03/Dec/2012:17:35:10.380]
      4   frontend_name "/" bind_name ":"                              frt/f1:
      5   message                        Connection error during SSL handshake

These fields just provide minimal information to help debugging connection
failures.

By using the "error-log-format" directive, the legacy log format described
above will not be used anymore, and all error log lines will follow the
defined format.

An example of reasonably complete error-log-format follows, it will report the
source address and port, the connection accept() date, the frontend name, the
number of active connections on the process and on thit frontend, haproxy's
internal error identifier on the front connection, the hexadecimal OpenSSL
error number (that can be copy-pasted to "openssl errstr" for full decoding),
the client certificate extraction status (0 indicates no error), the client
certificate validation status using the CA (0 indicates no error), a boolean
indicating if the connection is new or was resumed, the optional server name
indication (SNI) provided by the client, the SSL version name and the SSL
ciphers used on the connection, if any. Note that backend connection errors
are never reported here since in order for a backend connection to fail, it
would have passed through a successful stream, hence will be available as
regular traffic log (see option httplog or option httpslog).

   # detailed frontend connection error log
   error-log-format "%ci:%cp [%tr] %ft %ac/%fc %[fc_err]/\
         %[ssl_fc_err,hex]/%[ssl_c_err]/%[ssl_c_ca_err]/%[ssl_fc_is_resumed] \
         %[ssl_fc_sni]/%sslv/%sslc"


8.2.6. Custom log format
------------------------

Historically, custom log formats were only used to produce logs. But their
convenience when used to produce a string by assembling multiple complex
expressions has got them adopted by many directives which used to take only
a string in argument and which may now also take an such a Custom log format
definition. Such arguments, which are commonly designated by "<fmt>" in this
document, are defined exactly the same way as the argument to the "log-format"
directive, described here.

When it comes to logs and when the default log formats are not sufficient, it
is possible to define new ones in very fine details. As creating a log-format
from scratch is not always a trivial task, it is strongly recommended to first
have a look at the existing formats ("option tcplog", "option httplog", "option
httpslog"), pick the one looking the closest to the expectation, copy its
"log-format" equivalent string and adjust it.

A Custom log format definition is a single argument from a configuration
perspective. This means that it may not contain blanks (spaces or tabs), unless
these blanks are escaped using the backslash character ('\'), or the whole
definition is enclosed between quotes (which is the recommended way to use
them). The use of unquoted format strings is not recommended anymore as history
has shown that it was very error prone since a single missing backslash
character could result in silent truncation of the format. Such configurations
are still commonly encountered due to the massive adoption of log formats after
version 1.5-dev9, 3 years before quotes were usable, but it is recommended to
convert them to quoted strings and to drop the backslashes now.

A log format definition is made of any number of log format items separated
by text and spaces. A log format item starts with character '%'. In order to
emit a verbatim '%', it must be preceded by another '%' resulting in '%%'.

Logformat items may either be aliases or sample expressions:

If an item is named between square brackets ('[' .. ']') then it is used
as a sample expression rule (see section 7.3). This it useful to add some
less common information such as the client's SSL certificate's DN, or to log
the key that would be used to store an entry into a stick table. It is also
commonly used with non-log actions (header manipulation, variables etc).

Else if the item is named using an alpha-numerical name, it is an alias.
(Refer to the table below for the list of available aliases)

Items can take arguments using braces ('{}'), and multiple arguments are
separated by commas within the braces. Flags may be added or removed by
prefixing them with a '+' or '-' sign (see below for the list of available
flags).

Special alias "%o" may be used to propagate its flags to all other
logformat items on the same format string. This is particularly handy with
quoted ("Q") and escaped ("E") string formats.

Special alias "%OG" may be used to retrieve the log origin (when / where
the log was generated) in a human readable format. It is particularly useful
with "option logasap" because some log variables or sample fetches could report
incomplete values or behave differently depending on when / where the logformat
expression was evaluated. Possible values are:
  - "sess_error": log was generated during session error handling
  - "sess_killed": log was generated during session abortion (killed
    embryonic session)
  - "txn_accept": log was generated right after frontend conn was accepted
  - "txn_request": log was generated after client request was received
  - "txn_connect": log was generated after backend connection establishment
  - "txn_response": log was generated during server response handling
  - "txn_close": log was generated at the final txn step, before closing
  - "unspec": unknown or not specified
"%OG" is only relevant in logging context.

Items can optionally be named using ('()'). The name must be provided right
after '%' (before arguments). It will automatically be used as key name when
encoding flag such as "json" or "cbor" is set. When no encoding flag is
specified (default), item name will be ignored. It is also possible to force
the item's output to a given type by appending ':type' after the name, like
this: %(itemname:itemtype)aliasname or %(itemname:itemtype)[expr] where
itemtype may be 'str', 'sint' or 'bool'. Specifying the type is only relevant
when an encoding method is used. Also, it is supported to provide an empty name
to force the output type on an anonymous item: %(:itemtype), ie: when encoding
is not set globally, see flags definitions below for more information.

Due to the original goal of custom log formats to be used for logging only,
there is a special case made of non-printable and unsafe characters (those
outside ASCII codes 32 to 126 plus a few other ones) depending where they are
used. Section 8.6 describes what's done exactly for logs in order to make sure
one will not send unsafe codes that alter the readability of the output in a
terminal. When used to form header fields, health checks or payload responses,
the rules are less strict and only characters forbidden in HTTP header fields
are replaced by their hexadecimal encoding preceded by character '%'. This is
normally not a problem, but it might affect the output when the character was
expected to be reproduced verbatim (e.g. when building an error page or a full
response payload, where line feeds could appear as "%0A").

Note: in configuration directives "log-format", "log-format-sd" and
"unique-id-format", spaces are considered as delimiters and are merged.

Note: when using the RFC5424 syslog message format, the characters '"',
'\' and ']' inside PARAM-VALUE should be escaped with '\' as prefix (see
https://tools.ietf.org/html/rfc5424#section-6.3.3 for more details). In
such cases, the use of the flag "E" should be considered.

Supported item flags are (may be enabled/disabled from item's arguments):
  * Q: quote a string
  * X: hexadecimal representation (IPs, Ports, %Ts, %rt, %pid)
  * E: escape characters '"', '\' and ']' in a string with '\' as prefix
       (intended purpose is for the RFC5424 structured-data log formats)
  * bin: try to preserve binary data, this can be useful with sample
         expressions that output binary data in order to preserve the original
         data. Be careful however, because it can obviously generate non-
         printable chars, including NULL-byte, which most syslog endpoints
         don't expect. Thus it is mainly intended for use with set-var-fmt,
         rings and binary-capable log endpoints.
         This option can only be set globally (with %o), it will be ignored
         if set on an individual item's options.
  * json: automatically encode value in JSON format
          (when set globally, only named logformat items are considered)
          Incomplete numerical values (e.g.: '%B' when logasap is used),
          which are normally prefixed with '+' without encoding, will be
          encoded as-is. Also, '+E' option will be ignored.
  * cbor: automatically encode value in CBOR format
          (when set globally, only named logformat items are considered)
          By default, cbor encoded data is represented in HEX form so
          that it remains printable on stdout an can be used with usual
          syslog endpoints.
          As with json encoding, incomplete numerical values will be encoded
          as-is and '+E' option will be ignored.
          When combined with '+bin' option, it will directly generate raw
          binary CBOR payload. Be careful, because it will obviously generate
          non-printable chars, thus it is mainly intended for use with
          set-var-fmt, rings and binary-capable log endpoints.

  Example:

    log-format %T\ %t\ Some\ Text
    log-format %{+Q}o\ %t\ %s\ %{-Q}r

    log-format-sd %{+Q,+E}o\ [exampleSDID@1234\ header=%[capture.req.hdr(0)]]

    log-format "%{+json}o %(request)r %(custom_expr)[str(custom)]"
    log-format "%{+cbor}o %(request)r %(custom_expr)[str(custom)]"

Please refer to the table below for currently defined aliases :

  +---+------+------------------------------------------------------+---------+
  | R | alias| field name (8.2.2 and 8.2.3 for description)         | type    |
  |   |      | sample fetch alternative                             |         |
  +===+======+======================================================+=========+
  |   | %o   | special, apply flags on all following items          |         |
  +---+------+------------------------------------------------------+---------+
  |                          date formats                                     |
  +---+------+------------------------------------------------------+---------+
  |   | %T   | Accept date UTC + timezone                           |         |
  |   |      | %[accept_date,utime("%d/%b/%Y:%H:%M:%S %z")]         | date    |
  +---+------+------------------------------------------------------+---------+
  |   | %Tl  | Accept date local + timezone                         |         |
  |   |      | %[accept_date,ltime("%d/%b/%Y:%H:%M:%S %z")]         | date    |
  +---+------+------------------------------------------------------+---------+
  |   | %Ts  | Accept date as a UNIX timestamp                      | numeric |
  |   |      | %[accept_date]                                       |         |
  +---+------+------------------------------------------------------+---------+
  |   | %t   | Accept date local (with millisecond resolution)      |         |
  |   |      | %[accept_date(ms),ms_ltime("%d/%b/%Y:%H:%M:%S.%3N")] | date    |
  +---+------+------------------------------------------------------+---------+
  |   | %ms  | Accept date milliseconds                             |         |
  |   |      | %[accept_date(ms),ms_utime("%3N")]                   | numeric |
  +---+------+------------------------------------------------------+---------+
  | H | %tr  | Request date local (with millisecond resolution)     |         |
  |   |      | %[request_date(ms),ms_ltime("%d/%b/%Y:%H:%M:%S.%3N")]| date    |
  +---+------+------------------------------------------------------+---------+
  | H | %trg | Request date UTC + timezone                          |         |
  |   |      | %[request_date,utime("%d/%b/%Y:%H:%M:%S %z")]        | date    |
  +---+------+------------------------------------------------------+---------+
  | H | %trl | Request date local + timezone                        |         |
  |   |      | %[request_date,ltime("%d/%b/%Y:%H:%M:%S %z")]        | date    |
  +---+------+------------------------------------------------------+---------+
  |                          Timing events                                    |
  +---+------+------------------------------------------------------+---------+
  | H | %Ta  | Active time of the request (from TR to end)          |         |
  |   |      | %[txn.timer.total]                                   | numeric |
  +---+------+------------------------------------------------------+---------+
  |   | %Tc  | Tc                                                   |         |
  |   |      | %[bc.timer.connect]                                  | numeric |
  +---+------+------------------------------------------------------+---------+
  |   | %Td  | Td = Tt - (Tq + Tw + Tc + Tr)                        |         |
  |   |      | %[res.timer.data]                                    | numeric |
  +---+------+------------------------------------------------------+---------+
  |   | %Th  | connection handshake time (SSL, PROXY proto)         |         |
  |   |      | %[fc.timer.handshake]                                | numeric |
  +---+------+------------------------------------------------------+---------+
  | H | %Ti  | idle time before the HTTP request                    |         |
  |   |      | %[req.timer.idle]                                    | numeric |
  +---+------+------------------------------------------------------+---------+
  | H | %Tq  | Th + Ti + TR                                         |         |
  |   |      | %[req.timer.tq]                                      | numeric |
  +---+------+------------------------------------------------------+---------+
  | H | %TR  | time to receive the full request from 1st byte       |         |
  |   |      | %[req.timer.hdr]                                     | numeric |
  +---+------+------------------------------------------------------+---------+
  | H | %Tr  | Tr (response time)                                   |         |
  |   |      | %[res.timer.hdr]                                     | numeric |
  +---+------+------------------------------------------------------+---------+
  |   | %Tt  | Tt                                                   |         |
  |   |      | %[fc.timer.total]                                    | numeric |
  +---+------+------------------------------------------------------+---------+
  |   | %Tu  | Tu                                                   |         |
  |   |      | %[txn.timer.user]                                    | numeric |
  +---+------+------------------------------------------------------+---------+
  |   | %Tw  | Tw                                                   |         |
  |   |      | %[req.timer.queue]                                   | numeric |
  +---+------+------------------------------------------------------+---------+
  |                          Others                                           |
  +---+------+------------------------------------------------------+---------+
  |   | %B   | bytes_read           (from server to client)         | numeric |
  |   |      | %[bytes_out]                                         |         |
  +---+------+------------------------------------------------------+---------+
  | H | %CC  | captured_request_cookie                              | string  |
  +---+------+------------------------------------------------------+---------+
  | H | %CS  | captured_response_cookie                             | string  |
  +---+------+------------------------------------------------------+---------+
  |   | %H   | hostname                                             | string  |
  |   |      | %[hostname]                                          |         |
  +---+------+------------------------------------------------------+---------+
  | H | %HM  | HTTP method (ex: POST)                               | string  |
  |   |      | %[method]
  +---+------+------------------------------------------------------+---------+
  | H | %HP  | HTTP request URI without query string                | string  |
  +---+------+------------------------------------------------------+---------+
  | H | %HPO | HTTP path only (without host nor query string)       | string  |
  +---+------+------------------------------------------------------+---------+
  | H | %HQ  | HTTP request URI query string (ex: ?bar=baz)         | string  |
  |   |      | ?%[query]                                            |         |
  +---+------+------------------------------------------------------+---------+
  | H | %HU  | HTTP request URI (ex: /foo?bar=baz)                  | string  |
  +---+------+------------------------------------------------------+---------+
  | H | %HV  | HTTP version (ex: HTTP/1.0)                          | string  |
  |   |      | HTTP/%[req.ver]                                      |         |
  +---+------+------------------------------------------------------+---------+
  |   | %ID  | unique-id                                            | string  |
  |   |      | %[unique-id]                                         |         |
  +---+------+------------------------------------------------------+---------+
  |   | %ST  | status_code                                          | numeric |
  |   |      | %[txn.status]                                        |         |
  +---+------+------------------------------------------------------+---------+
  |   | %U   | bytes_uploaded       (from client to server)         | numeric |
  |   |      | %[bytes_in]                                          |         |
  +---+------+------------------------------------------------------+---------+
  |   | %ac  | actconn                                              |         |
  |   |      | %[act_conn]                                          | numeric |
  +---+------+------------------------------------------------------+---------+
  |   | %b   | backend_name                                         |         |
  |   |      | %[be_name]                                           | string  |
  +---+------+------------------------------------------------------+---------+
  |   | %bc  | beconn      (backend concurrent connections)         | numeric |
  |   |      | %[be_conn]                                           |         |
  +---+------+------------------------------------------------------+---------+
  |   | %bi  | backend_source_ip       (connecting address)         |         |
  |   |      | %[bc_src]                                            | IP      |
  +---+------+------------------------------------------------------+---------+
  |   | %bp  | backend_source_port     (connecting address)         |         |
  |   |      | %[bc_src_port]                                       | numeric |
  +---+------+------------------------------------------------------+---------+
  |   | %bq  | backend_queue                                        | numeric |
  |   |      | %[bc_be_queue]                                       |         |
  +---+------+------------------------------------------------------+---------+
  |   | %ci  | client_ip                 (accepted address)         |         |
  |   |      | %[src]                                               | IP      |
  +---+------+------------------------------------------------------+---------+
  |   | %cp  | client_port               (accepted address)         |         |
  |   |      | %[src_port]                                          | numeric |
  +---+------+------------------------------------------------------+---------+
  |   | %f   | frontend_name                                        | string  |
  |   |      | %[fe_name]                                           |         |
  +---+------+------------------------------------------------------+---------+
  |   | %fc  | feconn     (frontend concurrent connections)         | numeric |
  |   |      | %[fe_conn]                                           |         |
  +---+------+------------------------------------------------------+---------+
  |   | %fi  | frontend_ip              (accepting address)         |         |
  |   |      | %[dst]                                               | IP      |
  +---+------+------------------------------------------------------+---------+
  |   | %fp  | frontend_port            (accepting address)         |         |
  |   |      | %[dst_port]                                          | numeric |
  +---+------+------------------------------------------------------+---------+
  |   | %ft  | frontend_name_transport ('~' suffix for SSL)         | string  |
  +---+------+------------------------------------------------------+---------+
  |   | %lc  | frontend_log_counter                                 | numeric |
  +---+------+------------------------------------------------------+---------+
  |   | %hr  | captured_request_headers default style               | string  |
  +---+------+------------------------------------------------------+---------+
  |   | %hrl | captured_request_headers CLF style                   | string  |
  |   |      |                                                      | list    |
  +---+------+------------------------------------------------------+---------+
  |   | %hs  | captured_response_headers default style              | string  |
  +---+------+------------------------------------------------------+---------+
  |   | %hsl | captured_response_headers CLF style                  | string  |
  |   |      |                                                      | list    |
  +---+------+------------------------------------------------------+---------+
  | L | %OG  | human readable log origin                            | string  |
  +---+------+------------------------------------------------------+---------+
  |   | %pid | PID                                                  |         |
  |   |      | %[pid]                                               | numeric |
  +---+------+------------------------------------------------------+---------+
  | H | %r   | http_request                                         | string  |
  +---+------+------------------------------------------------------+---------+
  |   | %rc  | retries                                              | numeric |
  |   |      | %[txn.redispatched,iif(+,)]%[txn.conn_retries]       |         |
  +---+------+------------------------------------------------------+---------+
  |   | %rt  | request_counter (HTTP req or TCP session)            | numeric |
  |   |      | %[txn.id32]                                          |         |
  +---+------+------------------------------------------------------+---------+
  |   | %s   | server_name                                          | string  |
  |   |      | %[srv_name]                                          |         |
  +---+------+------------------------------------------------------+---------+
  |   | %sc  | srv_conn     (server concurrent connections)         | numeric |
  +---+------+------------------------------------------------------+---------+
  |   | %si  | server_IP                   (target address)         |         |
  |   |      | %[bc_dst]                                            | IP      |
  +---+------+------------------------------------------------------+---------+
  |   | %sp  | server_port                 (target address)         |         |
  |   |      | %[bc_dst_port]                                       | numeric |
  +---+------+------------------------------------------------------+---------+
  |   | %sq  | srv_queue                                            | numeric |
  |   |      | %[bc_srv_queue]                                      |         |
  +---+------+------------------------------------------------------+---------+
  | S | %sslc| ssl_ciphers (ex: AES-SHA)                            |         |
  |   |      | %[ssl_fc_cipher]                                     | string  |
  +---+------+------------------------------------------------------+---------+
  | S | %sslv| ssl_version (ex: TLSv1)                              |         |
  |   |      | %[ssl_fc_protocol]                                   | string  |
  +---+------+------------------------------------------------------+---------+
  |   | %ts  | termination_state                                    | string  |
  |   |      | %[txn.sess_term_state]                               |         |
  +---+------+------------------------------------------------------+---------+
  | H | %tsc | termination_state with cookie status                 | string  |
  +---+------+------------------------------------------------------+---------+

    R = Restrictions : H = mode http only ; S = SSL only ; L = log only


8.3. Advanced logging options
-----------------------------

Some advanced logging options are often looked for but are not easy to find out
just by looking at the various options. Here is an entry point for the few
options which can enable better logging. Please refer to the keywords reference
for more information about their usage.


8.3.1. Disabling logging of external tests
------------------------------------------

It is quite common to have some monitoring tools perform health checks on
HAProxy. Sometimes it will be a layer 3 load-balancer such as LVS or any
commercial load-balancer, and sometimes it will simply be a more complete
monitoring system such as Nagios. When the tests are very frequent, users often
ask how to disable logging for those checks. There are three possibilities :

  - if connections come from everywhere and are just TCP probes, it is often
    desired to simply disable logging of connections without data exchange, by
    setting "option dontlognull" in the frontend. It also disables logging of
    port scans, which may or may not be desired.

  - it is possible to use the "http-request set-log-level silent" action using
    a variety of conditions (source networks, paths, user-agents, etc).

  - if the tests are performed on a known URI, use "monitor-uri" to declare
    this URI as dedicated to monitoring. Any host sending this request will
    only get the result of a health-check, and the request will not be logged.


8.3.2. Logging before waiting for the stream to terminate
----------------------------------------------------------

The problem with logging at end of connection is that you have no clue about
what is happening during very long streams, such as remote terminal sessions
or large file downloads. This problem can be worked around by specifying
"option logasap" in the frontend. HAProxy will then log as soon as possible,
just before data transfer begins. This means that in case of TCP, it will still
log the connection status to the server, and in case of HTTP, it will log just
after processing the server headers. In this case, the number of bytes reported
is the number of header bytes sent to the client. In order to avoid confusion
with normal logs, the total time field and the number of bytes are prefixed
with a '+' sign which means that real numbers are certainly larger.


8.3.3. Raising log level upon errors
------------------------------------

Sometimes it is more convenient to separate normal traffic from errors logs,
for instance in order to ease error monitoring from log files. When the option
"log-separate-errors" is used, connections which experience errors, timeouts,
retries, redispatches or HTTP status codes 5xx will see their syslog level
raised from "info" to "err". This will help a syslog daemon store the log in
a separate file. It is very important to keep the errors in the normal traffic
file too, so that log ordering is not altered. You should also be careful if
you already have configured your syslog daemon to store all logs higher than
"notice" in an "admin" file, because the "err" level is higher than "notice".


8.3.4. Disabling logging of successful connections
--------------------------------------------------

Although this may sound strange at first, some large sites have to deal with
multiple thousands of logs per second and are experiencing difficulties keeping
them intact for a long time or detecting errors within them. If the option
"dontlog-normal" is set on the frontend, all normal connections will not be
logged. In this regard, a normal connection is defined as one without any
error, timeout, retry nor redispatch. In HTTP, the status code is checked too,
and a response with a status 5xx is not considered normal and will be logged
too. Of course, doing is is really discouraged as it will remove most of the
useful information from the logs. Do this only if you have no other
alternative.


8.3.5. Log profiles
-------------------

While some directives such as "log-format", "log-format-sd", "error-log-format"
or "log-tag" make it possible to configure log formatting globally or at the
proxy level, it may be relevant to configure such settings as close as possible
to the log endpoints, that is, per "log" directive.

This is where "log-profile" section comes into play: "log-profile" may be
defined anywhere in the configuration. This section accepts a set of different
keywords that are used to describe how the logs emitted for a given `log`
directive should be built.

From a "log" directive, one can choose to use a specific log-profile by its
name. The same profile may be used from multiple "log" directives.

log-profile <name>
  Creates a new log profile identified as <name>

log-tag <string>
  Override syslog log tag set globally or per-proxy using "log-tag" directive.

on <step> [drop] [format <fmt>] [sd <sd_fmt>]
  Override the log-format string normally used to build the log line at
  <step> logging step. <fmt> is used to override "log-format" or
  "error-log-format" strings (depending on the <step>) whereas <sd_fmt> is
  used to override "log-format-sd" string (both can be combined).

  "drop" special keyword may be used to specify that no log should be
  emitted for the given <step>. It takes precedence over "format" and
  "sd" if previously defined.

  Possible values for <step> are:

  - "accept"   : override log-format if the log is generated right after
                 frontend conn was accepted
  - "request"  : override log-format if the log is generated after client
                 request was received
  - "connect"  : override log-format if the log is generated after backend
                 connection establishment
  - "response" : override log-format if the log is generated during server
                 response handling
  - "close"    : override log-format if the log is generated at the final
                 transaction (txn) step
  - "error"    : override error-log-format for if the log is generated due
                 to a transaction error
  - "any"      : override both log-format and error-log-format for all logging
                 steps, unless a more precise step override is declared.

  See "do-log" action for relevant additional <step> values.

  This setting is only relevant for "log" directives used from contexts where
  using "log-format" directive makes sense (e.g.: http and tcp proxies).
  Else it will simply be ignored.

  Example :

    log-profile myprof

      log-tag "custom-tag"

      on error format "%ci: error"
      on connect drop
      on any sd "custom-sd"

    listen myproxy
      mode http
      option httplog
      log-tag "normal"

      log stdout format rfc5424 local0
      # success:
      # <134>1 2024-06-12T10:09:11.823400+02:00 - normal 224482 - - 127.0.0.1:53594 [12/Jun/2024:10:09:11.814] myproxy myproxy/<NOSRV> 0/-1/-1/-1/0 200 49 - - LR-- 1/1/0/0/0 0/0 "GET / HTTP/1.1"
      #
      # error:
      # <134>1 2024-06-12T10:09:44.810929+02:00 - normal 224482 - - 127.0.0.1:59258 [12/Jun/2024:10:09:44.426] myproxy myproxy/<NOSRV> -1/-1/-1/-1/384 400 0 - - CR-- 1/1/0/0/0 0/0 "<BADREQ>"

      log 127.0.0.1:514 format rfc5424 profile myprof local0
      # success:
      # <134>1 2024-06-12T10:09:11.823428+02:00 - custom-tag 224482 - custom-sd 127.0.0.1:53594 [12/Jun/2024:10:09:11.814] myproxy myproxy/<NOSRV> 0/-1/-1/-1/0 200 49 - - LR-- 1/1/0/0/0 0/0 "GET / HTTP/1.1"
      #
      # error:
      # <134>1 2024-06-12T10:09:51.566524+02:00 - custom-tag 224482 - - 127.0.0.1: error


8.4. Timing events
------------------

Timers provide a great help in troubleshooting network problems. All values are
reported in milliseconds (ms). These timers should be used in conjunction with
the stream termination flags. In TCP mode with "option tcplog" set on the
frontend, 3 control points are reported under the form "Tw/Tc/Tt", and in HTTP
mode, 5 control points are reported under the form "TR/Tw/Tc/Tr/Ta". In
addition, three other measures are provided, "Th", "Ti", and "Tq".

Timings events in HTTP mode:

                 first request               2nd request
      |<-------------------------------->|<-------------- ...
      t         tr                       t    tr ...
   ---|----|----|----|----|----|----|----|----|--
      : Th   Ti   TR   Tw   Tc   Tr   Td : Ti   ...
      :<---- Tq ---->:                   :
      :<-------------- Tt -------------->:
      :<--        -----Tu--------------->:
                :<--------- Ta --------->:

Timings events in TCP mode:

           TCP session
      |<----------------->|
      t                   t
   ---|----|----|----|----|---
      | Th   Tw   Tc   Td |
      |<------ Tt ------->|

  - Th: total time to accept tcp connection and execute handshakes for low level
    protocols. Currently, these protocols are proxy-protocol and SSL. This may
    only happen once during the whole connection's lifetime. A large time here
    may indicate that the client only pre-established the connection without
    speaking, that it is experiencing network issues preventing it from
    completing a handshake in a reasonable time (e.g. MTU issues), or that an
    SSL handshake was very expensive to compute. Please note that this time is
    reported only before the first request, so it is safe to average it over
    all request to calculate the amortized value. The second and subsequent
    request will always report zero here.

    This timer is named %Th as a log-format alias, and fc.timer.handshake as a
    sample fetch.

  - Ti: is the idle time before the HTTP request (HTTP mode only). This timer
    counts between the end of the handshakes and the first byte of the HTTP
    request. When dealing with a second request in keep-alive mode, it starts
    to count after the end of the transmission the previous response. When a
    multiplexed protocol such as HTTP/2 is used, it starts to count immediately
    after the previous request. Some browsers pre-establish connections to a
    server in order to reduce the latency of a future request, and keep them
    pending until they need it. This delay will be reported as the idle time. A
    value of -1 indicates that nothing was received on the connection.

    This timer is named %Ti as a log-format alias, and req.timer.idle as a
    sample fetch.

  - TR: total time to get the client request (HTTP mode only). It's the time
    elapsed between the first bytes received and the moment the proxy received
    the empty line marking the end of the HTTP headers. The value "-1"
    indicates that the end of headers has never been seen. This happens when
    the client closes prematurely or times out. This time is usually very short
    since most requests fit in a single packet. A large time may indicate a
    request typed by hand during a test.

    This timer is named %TR as a log-format alias, and req.timer.hdr as a
    sample fetch.

  - Tq: total time to get the client request from the accept date or since the
    emission of the last byte of the previous response (HTTP mode only). It's
    exactly equal to Th + Ti + TR unless any of them is -1, in which case it
    returns -1 as well. This timer used to be very useful before the arrival of
    HTTP keep-alive and browsers' pre-connect feature. It's recommended to drop
    it in favor of TR nowadays, as the idle time adds a lot of noise to the
    reports.

    This timer is named %Tq as a log-format alias, and req.timer.tq as a
    sample fetch.

  - Tw: total time spent in the queues waiting for a connection slot. It
    accounts for backend queue as well as the server queues, and depends on the
    queue size, and the time needed for the server to complete previous
    requests. The value "-1" means that the request was killed before reaching
    the queue, which is generally what happens with invalid or denied requests.

    This timer is named %Tw as a log-format alias, and req.timer.queue as a
    sample fetch.

  - Tc: total time to establish the TCP connection to the server. It's the time
    elapsed between the moment the proxy sent the connection request, and the
    moment it was acknowledged by the server, or between the TCP SYN packet and
    the matching SYN/ACK packet in return. The value "-1" means that the
    connection never established.

    This timer is named %Tc as a log-format alias, and bc.timer.connect as a
    sample fetch.

  - Tr: server response time (HTTP mode only). It's the time elapsed between
    the moment the TCP connection was established to the server and the moment
    the server sent its complete response headers. It purely shows its request
    processing time, without the network overhead due to the data transmission.
    It is worth noting that when the client has data to send to the server, for
    instance during a POST request, the time already runs, and this can distort
    apparent response time. For this reason, it's generally wise not to trust
    too much this field for POST requests initiated from clients behind an
    untrusted network. A value of "-1" here means that the last response header
    (empty line) was never seen, most likely because the server timeout stroke
    before the server managed to process the request or because the server
    returned an invalid response.

    This timer is named %Tr as a log-format alias, and res.timer.hdr as a
    sample fetch.

  - Td: this is the total transfer time of the response payload till the last
    byte sent to the client. In HTTP it starts after the last response header
    (after Tr).

    The data sent are not guaranteed to be received by the client, they can be
    stuck in either the kernel or the network.

    This timer is named %Td as a log-format alias, and res.timer.data as a
    sample fetch.

  - Ta: total active time for the HTTP request, between the moment the proxy
    received the first byte of the request header and the emission of the last
    byte of the response body. The exception is when the "logasap" option is
    specified. In this case, it only equals (TR+Tw+Tc+Tr), and is prefixed with
    a '+' sign. From this field, we can deduce "Td", the data transmission time,
    by subtracting other timers when valid :

        Td = Ta - (TR + Tw + Tc + Tr)

    Timers with "-1" values have to be excluded from this equation. Note that
    "Ta" can never be negative.

    This timer is named %Ta as a log-format alias, and txn.timer.total as a
    sample fetch.

  - Tt: total stream duration time, between the moment the proxy accepted it
    and the moment both ends were closed. The exception is when the "logasap"
    option is specified. In this case, it only equals (Th+Ti+TR+Tw+Tc+Tr), and
    is prefixed with a '+' sign. From this field, we can deduce "Td", the data
    transmission time, by subtracting other timers when valid :

        Td = Tt - (Th + Ti + TR + Tw + Tc + Tr)

    Timers with "-1" values have to be excluded from this equation. In TCP
    mode, "Ti", "Tq" and "Tr" have to be excluded too. Note that "Tt" can never
    be negative and that for HTTP, Tt is simply equal to (Th+Ti+Ta).

    This timer is named %Tt as a log-format alias, and fc.timer.total as a
    sample fetch.

  - Tu: total estimated time as seen from client, between the moment the proxy
    accepted it and the moment both ends were closed, without idle time.
    This is useful to roughly measure end-to-end time as a user would see it,
    without idle time pollution from keep-alive time between requests. This
    timer in only an estimation of time seen by user as it assumes network
    latency is the same in both directions. The exception is when the "logasap"
    option is specified. In this case, it only equals (Th+TR+Tw+Tc+Tr), and is
    prefixed with a '+' sign.

    This timer is named %Tu as a log-format alias, and txn.timer.user as a
    sample fetch.

These timers provide precious indications on trouble causes. Since the TCP
protocol defines retransmit delays of 3, 6, 12... seconds, we know for sure
that timers close to multiples of 3s are nearly always related to lost packets
due to network problems (wires, negotiation, congestion). Moreover, if "Ta" or
"Tt" is close to a timeout value specified in the configuration, it often means
that a stream has been aborted on timeout.

Most common cases :

  - If "Th" or "Ti" are close to 3000, a packet has probably been lost between
    the client and the proxy. This is very rare on local networks but might
    happen when clients are on far remote networks and send large requests. It
    may happen that values larger than usual appear here without any network
    cause. Sometimes, during an attack or just after a resource starvation has
    ended, HAProxy may accept thousands of connections in a few milliseconds.
    The time spent accepting these connections will inevitably slightly delay
    processing of other connections, and it can happen that request times in the
    order of a few tens of milliseconds are measured after a few thousands of
    new connections have been accepted at once. Using one of the keep-alive
    modes may display larger idle times since "Ti" measures the time spent
    waiting for additional requests.

  - If "Tc" is close to 3000, a packet has probably been lost between the
    server and the proxy during the server connection phase. This value should
    always be very low, such as 1 ms on local networks and less than a few tens
    of ms on remote networks.

  - If "Tr" is nearly always lower than 3000 except some rare values which seem
    to be the average majored by 3000, there are probably some packets lost
    between the proxy and the server.

  - If "Ta" is large even for small byte counts, it generally is because
    neither the client nor the server decides to close the connection while
    HAProxy is running in tunnel mode and both have agreed on a keep-alive
    connection mode. In order to solve this issue, it will be needed to specify
    one of the HTTP options to manipulate keep-alive or close options on either
    the frontend or the backend. Having the smallest possible 'Ta' or 'Tt' is
    important when connection regulation is used with the "maxconn" option on
    the servers, since no new connection will be sent to the server until
    another one is released.

Other noticeable HTTP log cases ('xx' means any value to be ignored) :

  TR/Tw/Tc/Tr/+Ta  The "option logasap" is present on the frontend and the log
                   was emitted before the data phase. All the timers are valid
                   except "Ta" which is shorter than reality.

  -1/xx/xx/xx/Ta   The client was not able to send a complete request in time
                   or it aborted too early. Check the stream termination flags
                   then "timeout http-request" and "timeout client" settings.

  TR/-1/xx/xx/Ta   It was not possible to process the request, maybe because
                   servers were out of order, because the request was invalid
                   or forbidden by ACL rules. Check the stream termination
                   flags.

  TR/Tw/-1/xx/Ta   The connection could not establish on the server. Either it
                   actively refused it or it timed out after Ta-(TR+Tw) ms.
                   Check the stream termination flags, then check the
                   "timeout connect" setting. Note that the tarpit action might
                   return similar-looking patterns, with "Tw" equal to the time
                   the client connection was maintained open.

  TR/Tw/Tc/-1/Ta   The server has accepted the connection but did not return
                   a complete response in time, or it closed its connection
                   unexpectedly after Ta-(TR+Tw+Tc) ms. Check the stream
                   termination flags, then check the "timeout server" setting.


8.5. Stream state at disconnection
-----------------------------------

TCP and HTTP logs provide a stream termination indicator in the
"termination_state" field, just before the number of active connections. It is
2-characters long in TCP mode, and is extended to 4 characters in HTTP mode,
each of which has a special meaning :

  - On the first character, a code reporting the first event which caused the
    stream to terminate :

        C : the TCP session was unexpectedly aborted by the client.

        S : the TCP session was unexpectedly aborted by the server, or the
            server explicitly refused it.

        P : the stream or session was prematurely aborted by the proxy, because
            of a connection limit enforcement, because a DENY filter was
            matched, because of a security check which detected and blocked a
            dangerous error in server response which might have caused
            information leak (e.g. cacheable cookie).

        L : the stream was locally processed by HAProxy.

        R : a resource on the proxy has been exhausted (memory, sockets, source
            ports, ...). Usually, this appears during the connection phase, and
            system logs should contain a copy of the precise error. If this
            happens, it must be considered as a very serious anomaly which
            should be fixed as soon as possible by any means.

        I : an internal error was identified by the proxy during a self-check.
            This should NEVER happen, and you are encouraged to report any log
            containing this, because this would almost certainly be a bug. It
            would be wise to preventively restart the process after such an
            event too, in case it would be caused by memory corruption.

        D : the stream was killed by HAProxy because the server was detected
            as down and was configured to kill all connections when going down.

        U : the stream was killed by HAProxy on this backup server because an
            active server was detected as up and was configured to kill all
            backup connections when going up.

        K : the stream was actively killed by an admin operating on HAProxy.

        c : the client-side timeout expired while waiting for the client to
            send or receive data.

        s : the server-side timeout expired while waiting for the server to
            send or receive data.

        - : normal stream completion, both the client and the server closed
            with nothing left in the buffers.

  - on the second character, the TCP or HTTP stream state when it was closed :

        R : the proxy was waiting for a complete, valid REQUEST from the client
            (HTTP mode only). Nothing was sent to any server.

        Q : the proxy was waiting in the QUEUE for a connection slot. This can
            only happen when servers have a 'maxconn' parameter set. It can
            also happen in the global queue after a redispatch consecutive to
            a failed attempt to connect to a dying server. If no redispatch is
            reported, then no connection attempt was made to any server.

        C : the proxy was waiting for the CONNECTION to establish on the
            server. The server might at most have noticed a connection attempt.

        H : the proxy was waiting for complete, valid response HEADERS from the
            server (HTTP only).

        D : the stream was in the DATA phase.

        L : the proxy was still transmitting LAST data to the client while the
            server had already finished. This one is very rare as it can only
            happen when the client dies while receiving the last packets.

        T : the request was tarpitted. It has been held open with the client
            during the whole "timeout tarpit" duration or until the client
            closed, both of which will be reported in the "Tw" timer.

        - : normal stream completion after end of data transfer.

  - the third character tells whether the persistence cookie was provided by
    the client (only in HTTP mode) :

        N : the client provided NO cookie. This is usually the case for new
            visitors, so counting the number of occurrences of this flag in the
            logs generally indicate a valid trend for the site frequentation.

        I : the client provided an INVALID cookie matching no known server.
            This might be caused by a recent configuration change, mixed
            cookies between HTTP/HTTPS sites, persistence conditionally
            ignored, or an attack.

        D : the client provided a cookie designating a server which was DOWN,
            so either "option persist" was used and the client was sent to
            this server, or it was not set and the client was redispatched to
            another server.

        V : the client provided a VALID cookie, and was sent to the associated
            server.

        E : the client provided a valid cookie, but with a last date which was
            older than what is allowed by the "maxidle" cookie parameter, so
            the cookie is consider EXPIRED and is ignored. The request will be
            redispatched just as if there was no cookie.

        O : the client provided a valid cookie, but with a first date which was
            older than what is allowed by the "maxlife" cookie parameter, so
            the cookie is consider too OLD and is ignored. The request will be
            redispatched just as if there was no cookie.

        U : a cookie was present but was not used to select the server because
            some other server selection mechanism was used instead (typically a
            "use-server" rule).

        - : does not apply (no cookie set in configuration).

  - the last character reports what operations were performed on the persistence
    cookie returned by the server (only in HTTP mode) :

        N : NO cookie was provided by the server, and none was inserted either.

        I : no cookie was provided by the server, and the proxy INSERTED one.
            Note that in "cookie insert" mode, if the server provides a cookie,
            it will still be overwritten and reported as "I" here.

        U : the proxy UPDATED the last date in the cookie that was presented by
            the client. This can only happen in insert mode with "maxidle". It
            happens every time there is activity at a different date than the
            date indicated in the cookie. If any other change happens, such as
            a redispatch, then the cookie will be marked as inserted instead.

        P : a cookie was PROVIDED by the server and transmitted as-is.

        R : the cookie provided by the server was REWRITTEN by the proxy, which
            happens in "cookie rewrite" or "cookie prefix" modes.

        D : the cookie provided by the server was DELETED by the proxy.

        - : does not apply (no cookie set in configuration).

The combination of the two first flags gives a lot of information about what
was happening when the stream or session terminated, and why it did terminate.
It can be helpful to detect server saturation, network troubles, local system
resource starvation, attacks, etc...

The most common termination flags combinations are indicated below. They are
alphabetically sorted, with the lowercase set just after the upper case for
easier finding and understanding.

  Flags   Reason

     --   Normal termination.

     CC   The client aborted before the connection could be established to the
          server. This can happen when HAProxy tries to connect to a recently
          dead (or unchecked) server, and the client aborts while HAProxy is
          waiting for the server to respond or for "timeout connect" to expire.

     CD   The client unexpectedly aborted during data transfer. This can be
          caused by a browser crash, by an intermediate equipment between the
          client and HAProxy which decided to actively break the connection,
          by network routing issues between the client and HAProxy, or by a
          keep-alive stream between the server and the client terminated first
          by the client.

     cD   The client did not send nor acknowledge any data for as long as the
          "timeout client" delay. This is often caused by network failures on
          the client side, or the client simply leaving the net uncleanly.

     CH   The client aborted while waiting for the server to start responding.
          It might be the server taking too long to respond or the client
          clicking the 'Stop' button too fast.

     cH   The "timeout client" stroke while waiting for client data during a
          POST request. This is sometimes caused by too large TCP MSS values
          for PPPoE networks which cannot transport full-sized packets. It can
          also happen when client timeout is smaller than server timeout and
          the server takes too long to respond.

     CQ   The client aborted while its stream was queued, waiting for a server
          with enough empty slots to accept it. It might be that either all the
          servers were saturated or that the assigned server was taking too
          long a time to respond.

     CR   The client aborted before sending a full HTTP request. Most likely
          the request was typed by hand using a telnet client, and aborted
          too early. The HTTP status code is likely a 400 here. Sometimes this
          might also be caused by an IDS killing the connection between HAProxy
          and the client. "option http-ignore-probes" can be used to ignore
          connections without any data transfer.

     cR   The "timeout http-request" stroke before the client sent a full HTTP
          request. This is sometimes caused by too large TCP MSS values on the
          client side for PPPoE networks which cannot transport full-sized
          packets, or by clients sending requests by hand and not typing fast
          enough, or forgetting to enter the empty line at the end of the
          request. The HTTP status code is likely a 408 here. Note: recently,
          some browsers started to implement a "pre-connect" feature consisting
          in speculatively connecting to some recently visited web sites just
          in case the user would like to visit them. This results in many
          connections being established to web sites, which end up in 408
          Request Timeout if the timeout strikes first, or 400 Bad Request when
          the browser decides to close them first. These ones pollute the log
          and feed the error counters. Some versions of some browsers have even
          been reported to display the error code. It is possible to work
          around the undesirable effects of this behavior by adding "option
          http-ignore-probes" in the frontend, resulting in connections with
          zero data transfer to be totally ignored. This will definitely hide
          the errors of people experiencing connectivity issues though.

     CT   The client aborted while its stream was tarpitted. It is important to
          check if this happens on valid requests, in order to be sure that no
          wrong tarpit rules have been written. If a lot of them happen, it
          might make sense to lower the "timeout tarpit" value to something
          closer to the average reported "Tw" timer, in order not to consume
          resources for just a few attackers.

     LC   The request was intercepted and locally handled by HAProxy. The
          request was not sent to the server. It only happens with a redirect
          because of a "redir" parameter on the server line.

     LR   The request was intercepted and locally handled by HAProxy. The
          request was not sent to the server. Generally it means a redirect was
          returned, an HTTP return statement was processed or the request was
          handled by an applet (stats, cache, Prometheus exported, lua applet...).

     LH   The response was intercepted and locally handled by HAProxy. Generally
          it means a redirect was returned or an HTTP return statement was
          processed.

     SC   The server or an equipment between it and HAProxy explicitly refused
          the TCP connection (the proxy received a TCP RST or an ICMP message
          in return). Under some circumstances, it can also be the network
          stack telling the proxy that the server is unreachable (e.g. no route,
          or no ARP response on local network). When this happens in HTTP mode,
          the status code is likely a 502 or 503 here.

     sC   The "timeout connect" stroke before a connection to the server could
          complete. When this happens in HTTP mode, the status code is likely a
          503 or 504 here.

     SD   The connection to the server died with an error during the data
          transfer. This usually means that HAProxy has received an RST from
          the server or an ICMP message from an intermediate equipment while
          exchanging data with the server. This can be caused by a server crash
          or by a network issue on an intermediate equipment.

     sD   The server did not send nor acknowledge any data for as long as the
          "timeout server" setting during the data phase. This is often caused
          by too short timeouts on L4 equipment before the server (firewalls,
          load-balancers, ...), as well as keep-alive sessions maintained
          between the client and the server expiring first on HAProxy.

     SH   The server aborted before sending its full HTTP response headers, or
          it crashed while processing the request. Since a server aborting at
          this moment is very rare, it would be wise to inspect its logs to
          control whether it crashed and why. The logged request may indicate a
          small set of faulty requests, demonstrating bugs in the application.
          Sometimes this might also be caused by an IDS killing the connection
          between HAProxy and the server.

     sH   The "timeout server" stroke before the server could return its
          response headers. This is the most common anomaly, indicating too
          long transactions, probably caused by server or database saturation.
          The immediate workaround consists in increasing the "timeout server"
          setting, but it is important to keep in mind that the user experience
          will suffer from these long response times. The only long term
          solution is to fix the application.

     sQ   The stream spent too much time in queue and has been expired. See
          the "timeout queue" and "timeout connect" settings to find out how to
          fix this if it happens too often. If it often happens massively in
          short periods, it may indicate general problems on the affected
          servers due to I/O or database congestion, or saturation caused by
          external attacks.

     PC   The proxy refused to establish a connection to the server because the
          process's socket limit has been reached while attempting to connect.
          The global "maxconn" parameter may be increased in the configuration
          so that it does not happen anymore. This status is very rare and
          might happen when the global "ulimit-n" parameter is forced by hand.

     PD   The proxy blocked an incorrectly formatted chunked encoded message in
          a request or a response, after the server has emitted its headers. In
          most cases, this will indicate an invalid message from the server to
          the client. HAProxy supports chunk sizes of up to 2GB - 1 (2147483647
          bytes). Any larger size will be considered as an error.

     PH   The proxy blocked the server's response, because it was invalid,
          incomplete, dangerous (cache control), or matched a security filter.
          In any case, an HTTP 502 error is sent to the client. One possible
          cause for this error is an invalid syntax in an HTTP header name
          containing unauthorized characters. It is also possible but quite
          rare, that the proxy blocked a chunked-encoding request from the
          client due to an invalid syntax, before the server responded. In this
          case, an HTTP 400 error is sent to the client and reported in the
          logs. Finally, it may be due to an HTTP header rewrite failure on the
          response. In this case, an HTTP 500 error is sent (see
          "tune.maxrewrite" and "http-response strict-mode" for more
          inforomation).

     PR   The proxy blocked the client's HTTP request, either because of an
          invalid HTTP syntax, in which case it returned an HTTP 400 error to
          the client, or because a deny filter matched, in which case it
          returned an HTTP 403 error.  It may also be due to an HTTP header
          rewrite failure on the request. In this case, an HTTP 500 error is
          sent (see "tune.maxrewrite" and "http-request strict-mode" for more
          inforomation).

     PT   The proxy blocked the client's request and has tarpitted its
          connection before returning it a 500 server error. Nothing was sent
          to the server. The connection was maintained open for as long as
          reported by the "Tw" timer field.

     RC   A local resource has been exhausted (memory, sockets, source ports)
          preventing the connection to the server from establishing. The error
          logs will tell precisely what was missing. This is very rare and can
          only be solved by proper system tuning.

The combination of the two last flags gives a lot of information about how
persistence was handled by the client, the server and by HAProxy. This is very
important to troubleshoot disconnections, when users complain they have to
re-authenticate. The commonly encountered flags are :

     --   Persistence cookie is not enabled.

     NN   No cookie was provided by the client, none was inserted in the
          response. For instance, this can be in insert mode with "postonly"
          set on a GET request.

     II   A cookie designating an invalid server was provided by the client,
          a valid one was inserted in the response. This typically happens when
          a "server" entry is removed from the configuration, since its cookie
          value can be presented by a client when no other server knows it.

     NI   No cookie was provided by the client, one was inserted in the
          response. This typically happens for first requests from every user
          in "insert" mode, which makes it an easy way to count real users.

     VN   A cookie was provided by the client, none was inserted in the
          response. This happens for most responses for which the client has
          already got a cookie.

     VU   A cookie was provided by the client, with a last visit date which is
          not completely up-to-date, so an updated cookie was provided in
          response. This can also happen if there was no date at all, or if
          there was a date but the "maxidle" parameter was not set, so that the
          cookie can be switched to unlimited time.

     EI   A cookie was provided by the client, with a last visit date which is
          too old for the "maxidle" parameter, so the cookie was ignored and a
          new cookie was inserted in the response.

     OI   A cookie was provided by the client, with a first visit date which is
          too old for the "maxlife" parameter, so the cookie was ignored and a
          new cookie was inserted in the response.

     DI   The server designated by the cookie was down, a new server was
          selected and a new cookie was emitted in the response.

     VI   The server designated by the cookie was not marked dead but could not
          be reached. A redispatch happened and selected another one, which was
          then advertised in the response.


8.6. Non-printable characters
-----------------------------

In order not to cause trouble to log analysis tools or terminals during log
consulting, non-printable characters are not sent as-is into log files, but are
converted to the two-digits hexadecimal representation of their ASCII code,
prefixed by the character '#'. The only characters that can be logged without
being escaped are comprised between 32 and 126 (inclusive). Obviously, the
escape character '#' itself is also encoded to avoid any ambiguity ("#23"). It
is the same for the character '"' which becomes "#22", as well as '{', '|' and
'}' when logging headers.

Note that the space character (' ') is not encoded in headers, which can cause
issues for tools relying on space count to locate fields. A typical header
containing spaces is "User-Agent".

Last, it has been observed that some syslog daemons such as syslog-ng escape
the quote ('"') with a backslash ('\'). The reverse operation can safely be
performed since no quote may appear anywhere else in the logs.


8.7. Capturing HTTP cookies
---------------------------

Cookie capture simplifies the tracking a complete user session. This can be
achieved using the "capture cookie" statement in the frontend. Please refer to
section 4.2 for more details. Only one cookie can be captured, and the same
cookie will simultaneously be checked in the request ("Cookie:" header) and in
the response ("Set-Cookie:" header). The respective values will be reported in
the HTTP logs at the "captured_request_cookie" and "captured_response_cookie"
locations (see section 8.2.3 about HTTP log format). When either cookie is
not seen, a dash ('-') replaces the value. This way, it's easy to detect when a
user switches to a new session for example, because the server will reassign it
a new cookie. It is also possible to detect if a server unexpectedly sets a
wrong cookie to a client, leading to session crossing.

  Examples :
        # capture the first cookie whose name starts with "ASPSESSION"
        capture cookie ASPSESSION len 32

        # capture the first cookie whose name is exactly "vgnvisitor"
        capture cookie vgnvisitor= len 32

It is possible to perform more advanced captures using "http-request" and
"http-response" rules to assign cookies to variables of scope "txn". The cookie
values may then be extracted from the request or response using the "req.cook"
and "res.cook" sample fetch functions (see section 7.3.6) and assigned to a
variable using the "set-var" or "set-var-fmt" actions (see section 4.3). A
custom log-format will then permit to present these variables where desired
(see section 8.2.6).


8.8. Capturing HTTP headers (legacy)
------------------------------------

Header captures are useful to track unique request identifiers set by an upper
proxy, virtual host names, user-agents, POST content-length, referrers, etc. In
the response, one can search for information about the response length, how the
server asked the cache to behave, or an object location during a redirection.

There are two ways to perform header captures. The modern one involves setting
variables from the headers to be captured, or from composite samples returned
by "req.hdr_names", "req.hdrs", "res.hdr_names", "res.hdrs" (see section 7.3.6)
for all possibilities. These can be assigned to variables of scope "txn" using
the "set-var" and "set-var-fmt" actions from the "http-request" and
"http-response" rulesets (see section 4.3), which can then be referenced from
custom log formats (see section 8.2.6). This is the recommended way to capture
HTTP headers.

There is also the legacy method which predates the http-request rules and
variables, which does not involve adjusting the log format, and which has also
long been used both for logging and as an artificial way to convey request
information all along the HTTP transaction, using the older "capture" rulesets.
This is what is described in this section.

Legacy header captures are performed using the "capture request header" and
"capture response header" statements in the frontend. Please consult their
definition in section 4.2 for more details.

It is possible to include both request headers and response headers at the same
time. Non-existent headers are logged as empty strings, and if one header
appears more than once, only its last occurrence will be logged. Request headers
are grouped within braces '{' and '}' in the same order as they were declared,
and delimited with a vertical bar '|' without any space. Response headers
follow the same representation, but are displayed after a space following the
request headers block. These blocks are displayed just before the HTTP request
in the logs.

As a special case, it is possible to specify an HTTP header capture in a TCP
frontend. The purpose is to enable logging of headers which will be parsed in
an HTTP backend if the request is then switched to this HTTP backend.

  Example :
        # This instance chains to the outgoing proxy
        listen proxy-out
            mode http
            option httplog
            option logasap
            log global
            server cache1 192.168.1.1:3128

            # log the name of the virtual server
            capture request  header Host len 20

            # log the amount of data uploaded during a POST
            capture request  header Content-Length len 10

            # log the beginning of the referrer
            capture request  header Referer len 20

            # server name (useful for outgoing proxies only)
            capture response header Server len 20

            # logging the content-length is useful with "option logasap"
            capture response header Content-Length len 10

            # log the expected cache behavior on the response
            capture response header Cache-Control len 8

            # the Via header will report the next proxy's name
            capture response header Via len 20

            # log the URL location during a redirection
            capture response header Location len 20

    >>> Aug  9 20:26:09 localhost \
          haproxy[2022]: 127.0.0.1:34014 [09/Aug/2004:20:26:09] proxy-out \
          proxy-out/cache1 0/0/0/162/+162 200 +350 - - ---- 0/0/0/0/0 0/0 \
          {fr.adserver.yahoo.co||http://fr.f416.mail.} {|864|private||} \
          "GET http://fr.adserver.yahoo.com/"

    >>> Aug  9 20:30:46 localhost \
          haproxy[2022]: 127.0.0.1:34020 [09/Aug/2004:20:30:46] proxy-out \
          proxy-out/cache1 0/0/0/182/+182 200 +279 - - ---- 0/0/0/0/0 0/0 \
          {w.ods.org||} {Formilux/0.1.8|3495|||} \
          "GET http://trafic.1wt.eu/ HTTP/1.1"

    >>> Aug  9 20:30:46 localhost \
          haproxy[2022]: 127.0.0.1:34028 [09/Aug/2004:20:30:46] proxy-out \
          proxy-out/cache1 0/0/2/126/+128 301 +223 - - ---- 0/0/0/0/0 0/0 \
          {www.sytadin.equipement.gouv.fr||http://trafic.1wt.eu/} \
          {Apache|230|||http://www.sytadin.} \
          "GET http://www.sytadin.equipement.gouv.fr/ HTTP/1.1"


8.9. Examples of logs
---------------------

These are real-world examples of logs accompanied with an explanation. Some of
them have been made up by hand. The syslog part has been removed for better
reading. Their sole purpose is to explain how to decipher them.

    >>> haproxy[674]: 127.0.0.1:33318 [15/Oct/2003:08:31:57.130] px-http \
          px-http/srv1 6559/0/7/147/6723 200 243 - - ---- 5/3/3/1/0 0/0 \
          "HEAD / HTTP/1.0"

    => long request (6.5s) entered by hand through 'telnet'. The server replied
       in 147 ms, and the session ended normally ('----')

    >>> haproxy[674]: 127.0.0.1:33319 [15/Oct/2003:08:31:57.149] px-http \
          px-http/srv1 6559/1230/7/147/6870 200 243 - - ---- 324/239/239/99/0 \
          0/9 "HEAD / HTTP/1.0"

    => Idem, but the request was queued in the global queue behind 9 other
       requests, and waited there for 1230 ms.

    >>> haproxy[674]: 127.0.0.1:33320 [15/Oct/2003:08:32:17.654] px-http \
          px-http/srv1 9/0/7/14/+30 200 +243 - - ---- 3/3/3/1/0 0/0 \
          "GET /image.iso HTTP/1.0"

    => request for a long data transfer. The "logasap" option was specified, so
       the log was produced just before transferring data. The server replied in
       14 ms, 243 bytes of headers were sent to the client, and total time from
       accept to first data byte is 30 ms.

    >>> haproxy[674]: 127.0.0.1:33320 [15/Oct/2003:08:32:17.925] px-http \
          px-http/srv1 9/0/7/14/30 502 243 - - PH-- 3/2/2/0/0 0/0 \
          "GET /cgi-bin/bug.cgi? HTTP/1.0"

    => the proxy blocked a server response either because of an "http-response
       deny" rule, or because the response was improperly formatted and not
       HTTP-compliant, or because it blocked sensitive information which risked
       being cached. In this case, the response is replaced with a "502 bad
       gateway". The flags ("PH--") tell us that it was HAProxy who decided to
       return the 502 and not the server.

    >>> haproxy[18113]: 127.0.0.1:34548 [15/Oct/2003:15:18:55.798] px-http \
          px-http/<NOSRV> -1/-1/-1/-1/8490 -1 0 - - CR-- 2/2/2/0/0 0/0 ""

    => the client never completed its request and aborted itself ("C---") after
       8.5s, while the proxy was waiting for the request headers ("-R--").
       Nothing was sent to any server.

    >>> haproxy[18113]: 127.0.0.1:34549 [15/Oct/2003:15:19:06.103] px-http \
         px-http/<NOSRV> -1/-1/-1/-1/50001 408 0 - - cR-- 2/2/2/0/0 0/0 ""

    => The client never completed its request, which was aborted by the
       time-out ("c---") after 50s, while the proxy was waiting for the request
       headers ("-R--"). Nothing was sent to any server, but the proxy could
       send a 408 return code to the client.

    >>> haproxy[18989]: 127.0.0.1:34550 [15/Oct/2003:15:24:28.312] px-tcp \
          px-tcp/srv1 0/0/5007 0 cD 0/0/0/0/0 0/0

    => This log was produced with "option tcplog". The client timed out after
       5 seconds ("c----").

    >>> haproxy[18989]: 10.0.0.1:34552 [15/Oct/2003:15:26:31.462] px-http \
          px-http/srv1 3183/-1/-1/-1/11215 503 0 - - SC-- 205/202/202/115/3 \
          0/0 "HEAD / HTTP/1.0"

    => The request took 3s to complete (probably a network problem), and the
       connection to the server failed ('SC--') after 4 attempts of 2 seconds
       (config says 'retries 3'), and no redispatch (otherwise we would have
       seen "/+3"). Status code 503 was returned to the client. There were 115
       connections on this server, 202 connections on this proxy, and 205 on
       the global process. It is possible that the server refused the
       connection because of too many already established.


9. Supported filters
--------------------

Here are listed officially supported filters with the list of parameters they
accept. Depending on compile options, some of these filters might be
unavailable. The list of available filters is reported in haproxy -vv.

See also : "filter"

9.1. Trace
----------

filter trace [name <name>] [random-forwarding] [hexdump]

  Arguments:
    <name>               is an arbitrary name that will be reported in
                         messages. If no name is provided, "TRACE" is used.

    <quiet>              inhibits trace messages.

    <random-forwarding>  enables the random forwarding of parsed data. By
                         default, this filter forwards all previously parsed
                         data. With this parameter, it only forwards a random
                         amount of the parsed data.

    <hexdump>             dumps all forwarded data to the server and the client.

This filter can be used as a base to develop new filters. It defines all
callbacks and print a message on the standard error stream (stderr) with useful
information for all of them. It may be useful to debug the activity of other
filters or, quite simply, HAProxy's activity.

Using <random-parsing> and/or <random-forwarding> parameters is a good way to
tests the behavior of a filter that parses data exchanged between a client and
a server by adding some latencies in the processing.


9.2. HTTP compression
---------------------

filter compression

The HTTP compression has been moved in a filter in HAProxy 1.7. "compression"
keyword must still be used to enable and configure the HTTP compression. And
when no other filter is used, it is enough. When used with the cache or the
fcgi-app enabled, it is also enough. In this case, the compression is always
done after the response is stored in the cache. But it is mandatory to
explicitly use a filter line to enable the HTTP compression when at least one
filter other than the cache or the fcgi-app is used for the same
listener/frontend/backend. This is important to know the filters evaluation
order.

See also : "compression", section 9.4 about the cache filter and section 9.5
           about the fcgi-app filter.


9.3. Stream Processing Offload Engine (SPOE)
--------------------------------------------

filter spoe [engine <name>] config <file>

  Arguments :

    <name>      is the engine name that will be used to find the right scope in
                the configuration file. If not provided, all the file will be
                parsed.

    <file>      is the path of the engine configuration file. This file can
                contain configuration of several engines. In this case, each
                part must be placed in its own scope.

The Stream Processing Offload Engine (SPOE) is a filter communicating with
external components. It allows the offload of some specifics processing on the
streams in tiered applications. These external components and information
exchanged with them are configured in dedicated files, for the main part. It
also requires dedicated backends, defined in HAProxy configuration.

SPOE communicates with external components using an in-house binary protocol,
the Stream Processing Offload Protocol (SPOP).

When the SPOE is used on a stream, a dedicated stream is spawned to handle the
communication with the external component. The main stream is the parent stream
of this "SPOE" stream. It means it is possible to retrieve variables of the
main stream from the "SPOE" stream. See section 2.8 about variables for
details.

For all information about the SPOE configuration and the SPOP specification, see
"doc/SPOE.txt".

9.4. Cache
----------

filter cache <name>

  Arguments :

    <name>      is name of the cache section this filter will use.

The cache uses a filter to store cacheable responses. The HTTP rules
"cache-store" and "cache-use" must be used to define how and when to use a
cache. By default the corresponding filter is implicitly defined. And when no
other filters than fcgi-app or compression are used, it is enough. In such
case, the compression filter is always evaluated after the cache filter. But it
is mandatory to explicitly use a filter line to use a cache when at least one
filter other than the compression or the fcgi-app is used for the same
listener/frontend/backend. This is important to know the filters evaluation
order.

See also : section 9.2 about the compression filter, section 9.5 about the
           fcgi-app filter and section 6 about cache.


9.5. Fcgi-app
-------------

filter fcgi-app <name>

  Arguments :

    <name>      is name of the fcgi-app section this filter will use.

The FastCGI application uses a filter to evaluate all custom parameters on the
request path, and to process the headers on the response path. the <name> must
reference an existing fcgi-app section. The directive "use-fcgi-app" should be
used to define the application to use. By default the corresponding filter is
implicitly defined. And when no other filters than cache or compression are
used, it is enough. But it is mandatory to explicitly use a filter line to a
fcgi-app when at least one filter other than the compression or the cache is
used for the same backend. This is important to know the filters evaluation
order.

See also: "use-fcgi-app", section 9.2 about the compression filter, section 9.4
          about the cache filter and section 10 about FastCGI application.


9.6. OpenTracing
----------------

The OpenTracing filter adds native support for using distributed tracing in
HAProxy. This is enabled by sending an OpenTracing compliant request to one
of the supported tracers such as Datadog, Jaeger, Lightstep and Zipkin tracers.
Please note: tracers are not listed by any preference, but alphabetically.

This feature is only enabled when HAProxy was built with USE_OT=1.

The OpenTracing filter activation is done explicitly by specifying it in the
HAProxy configuration. If this is not done, the OpenTracing filter in no way
participates in the work of HAProxy.

filter opentracing [id <id>] config <file>

  Arguments :

    <id>        is the OpenTracing filter id that will be used to find the
                right scope in the configuration file. If no filter id is
                specified, 'ot-filter' is used as default.  If scope is not
                specified in the configuration file, it applies to all defined
                OpenTracing filters.

    <file>      is the path of the OpenTracing configuration file. The same
                file can contain configurations for multiple OpenTracing
                filters simultaneously. In that case we do not need to define
                scope so the same configuration applies to all filters or each
                filter must have its own scope defined.

More detailed documentation related to the operation, configuration and use
of the filter can be found in the addons/ot directory.

Note: The OpenTracing filter shouldn't be used for new designs as OpenTracing
      itself is no longer maintained nor supported by its authors. A
      replacement filter base on OpenTelemetry is currently under development
      and is expected to be ready around HAProxy 3.2. As such OpenTracing will
      be deprecated in 3.3 and removed in 3.5.


9.7. Bandwidth limitation
--------------------------

filter bwlim-in  <name> default-limit <size> default-period <time> [min-size <sz>]
filter bwlim-out <name> default-limit <size> default-period <time> [min-size <sz>]
filter bwlim-in  <name> limit <size> key <pattern> [table <table>] [min-size <sz>]
filter bwlim-out <name> limit <size> key <pattern> [table <table>] [min-size <sz>]

  Arguments :

    <name>      is the filter name that will be used by 'set-bandwidth-limit'
                actions to reference a specific bandwidth limitation filter.

    <size>      is max number of bytes that can be forwarded over the period.
                The value must be specified for per-stream and shared bandwidth
                limitation filters. It follows the HAProxy size format and is
                expressed in bytes.

    <pattern>   is a sample expression rule as described in section 7.3. It
                describes what elements will be analyzed, extracted, combined,
                and used to select which table entry to update the counters. It
                must be specified for shared bandwidth limitation filters only.

    <table>     is an optional table to be used instead of the default one,
                which is the stick-table declared in the current proxy. It can
                be specified for shared bandwidth limitation filters only.

    <time>      is the default time period used to evaluate the bandwidth
                limitation rate. It can be specified for per-stream bandwidth
                limitation filters only. It follows the HAProxy time format and
                is expressed in milliseconds.

    <min-size>  is the optional minimum number of bytes forwarded at a time by
                a stream excluding the last packet that may be smaller. This
                value can be specified for per-stream and shared bandwidth
                limitation filters. It follows the HAProxy size format and is
                expressed in bytes.

Bandwidth limitation filters should be used to restrict the data forwarding
speed at the stream level. By extension, such filters limit the network
bandwidth consumed by a resource. Several bandwidth limitation filters can be
used. For instance, it is possible to define a limit per source address to be
sure a client will never consume all the network bandwidth, thereby penalizing
other clients, and another one per stream to be able to fairly handle several
connections for a given client.

The definition order of these filters is important. If several bandwidth
filters are enabled on a stream, the filtering will be applied in their
definition order. It is also important to understand the definition order of
the other filters have an influence. For instance, depending on the HTTP
compression filter is defined before or after a bandwidth limitation filter,
the limit will be applied on the compressed payload or not. The same is true
for the cache filter.

There are two kinds of bandwidth limitation filters. The first one enforces a
default limit and is applied per stream. The second one uses a stickiness table
to enforce a limit equally divided between all streams sharing the same entry in
the table.

In addition, for a given filter, depending on the filter keyword used, the
limitation can be applied on incoming data, received from the client and
forwarded to a server, or on outgoing data, received from a server and sent to
the client. To apply a limit on incoming data, "bwlim-in" keyword must be
used. To apply it on outgoing data, "bwlim-out" keyword must be used. In both
cases, the bandwidth limitation is applied on forwarded data, at the stream
level.

The bandwidth limitation is applied at the stream level and not at the
connection level. For multiplexed protocols (H2, H3 and FastCGI), the streams
of the same connection may have different limits.

For a per-stream bandwidth limitation filter, default period and limit must be
defined. As their names suggest, they are the default values used to setup the
bandwidth limitation rate for a stream. However, for this kind of filter and
only this one, it is possible to redefine these values using sample expressions
when the filter is enabled with a TCP/HTTP "set-bandwidth-limit" action.

For a shared bandwidth limitation filter, depending on whether it is applied on
incoming or outgoing data, the stickiness table used must store the
corresponding bytes rate information. "bytes_in_rate(<period>)" counter must be
stored to limit incoming data and "bytes_out_rate(<period>)" counter must be
used to limit outgoing data.

Finally, it is possible to set the minimum number of bytes that a bandwidth
limitation filter can forward at a time for a given stream. It should be used
to not forward too small amount of data, to reduce the CPU usage. It must
carefully be defined. Too small, a value can increase the CPU usage. Too high,
it can increase the latency. It is also highly linked to the defined bandwidth
limit. If it is too close to the bandwidth limit, some pauses may be
experienced to not exceed the limit because too many bytes will be consumed at
a time. It is highly dependent on the filter configuration. A good idea is to
start with something around 2 TCP MSS, typically 2896 bytes, and tune it after
some experimentations.

  Example:
    frontend http
        bind *:80
        mode http

        # If this filter is enabled, the stream will share the download limit
        # of 10m/s with all other streams with the same source address.
        filter bwlim-out limit-by-src key src table limit-by-src limit 10m

        # If this filter is enabled, the stream will be limited to download at 1m/s,
        # independently of all other streams.
        filter bwlim-out limit-by-strm default-limit 1m default-period 1s

        # Limit all streams to 1m/s (the default limit) and those accessing the
        # internal API to 100k/s. Limit each source address to 10m/s. The shared
        # limit is applied first. Both are limiting the download rate.
        http-request set-bandwidth-limit limit-by-strm
        http-request set-bandwidth-limit limit-by-strm limit 100k if { path_beg /internal }
        http-request set-bandwidth-limit limit-by-src
        ...

    backend limit-by-src
        # The stickiness table used by <limit-by-src> filter
        stick-table type ip size 1m expire 3600s store bytes_out_rate(1s)

See also : "tcp-request content set-bandwidth-limit",
           "tcp-response content set-bandwidth-limit",
           "http-request set-bandwidth-limit" and
           "http-response set-bandwidth-limit".

10. FastCGI applications
-------------------------

HAProxy is able to send HTTP requests to Responder FastCGI applications. This
feature was added in HAProxy 2.1. To do so, servers must be configured to use
the FastCGI protocol (using the keyword "proto fcgi" on the server line) and a
FastCGI application must be configured and used by the backend managing these
servers (using the keyword "use-fcgi-app" into the proxy section). Several
FastCGI applications may be defined, but only one can be used at a time by a
backend.

HAProxy implements all features of the FastCGI specification for Responder
application. Especially it is able to multiplex several requests on a simple
connection.

10.1. Setup
-----------

10.1.1. Fcgi-app section
--------------------------

fcgi-app <name>
  Declare a FastCGI application named <name>. To be valid, at least the
  document root must be defined.

acl <aclname> <criterion> [flags] [operator] <value> ...
  Declare or complete an access list.

  See "acl" keyword in section 4.2 and section 7 about ACL usage for
  details. ACLs defined for a FastCGI application are private. They cannot be
  used by any other application or by any proxy. In the same way, ACLs defined
  in any other section are not usable by a FastCGI application. However,
  Pre-defined ACLs are available.

docroot <path>
   Define the document root on the remote host. <path> will be used to build
   the default value of FastCGI parameters SCRIPT_FILENAME and
   PATH_TRANSLATED. It is a mandatory setting.

index <script-name>
  Define the script name that will be appended after an URI that ends with a
  slash ("/") to set the default value of the FastCGI parameter SCRIPT_NAME. It
  is an optional setting.

  Example :
    index index.php

log-stderr global
log-stderr <target> [len <length>] [format <format>]
    [sample <ranges>:<sample_size>] <facility> [<level> [<minlevel>]]
  Enable logging of STDERR messages reported by the FastCGI application.

  See "log" keyword in section 4.2 for details. It is an optional setting. By
  default STDERR messages are ignored.

pass-header <name> [ { if | unless } <condition> ]
  Specify the name of a request header which will be passed to the FastCGI
  application. It may optionally be followed by an ACL-based condition, in
  which case it will only be evaluated if the condition is true.

  Most request headers are already available to the FastCGI application,
  prefixed with "HTTP_". Thus, this directive is only required to pass headers
  that are purposefully omitted. Currently, the headers "Authorization",
  "Proxy-Authorization" and hop-by-hop headers are omitted.

  Note that the headers "Content-type" and "Content-length" are never passed to
  the FastCGI application because they are already converted into parameters.

path-info <regex>
  Define a regular expression to extract the script-name and the path-info from
  the URL-decoded path. Thus, <regex> may have two captures: the first one to
  capture the script name and the second one to capture the path-info. The
  first one is mandatory, the second one is optional. This way, it is possible
  to extract the script-name from the path ignoring the path-info. It is an
  optional setting. If it is not defined, no matching is performed on the
  path. and the FastCGI parameters PATH_INFO and PATH_TRANSLATED are not
  filled.

  For security reason, when this regular expression is defined, the newline and
  the null characters are forbidden from the path, once URL-decoded. The reason
  to such limitation is because otherwise the matching always fails (due to a
  limitation one the way regular expression are executed in HAProxy). So if one
  of these two characters is found in the URL-decoded path, an error is
  returned to the client. The principle of least astonishment is applied here.

  Example :
     path-info ^(/.+\.php)(/.*)?$ # both script-name and path-info may be set
     path-info ^(/.+\.php)        # the path-info is ignored

option get-values
no option get-values
  Enable or disable the retrieve of variables about connection management.

  HAProxy is able to send the record FCGI_GET_VALUES on connection
  establishment to retrieve the value for following variables:

    * FCGI_MAX_REQS     The maximum number of concurrent requests this
                        application will accept.

    * FCGI_MPXS_CONNS   "0" if this application does not multiplex connections,
                        "1" otherwise.

  Some FastCGI applications does not support this feature. Some others close
  the connection immediately after sending their response. So, by default, this
  option is disabled.

  Note that the maximum number of concurrent requests accepted by a FastCGI
  application is a connection variable. It only limits the number of streams
  per connection. If the global load must be limited on the application, the
  server parameters "maxconn" and "pool-max-conn" must be set. In addition, if
  an application does not support connection multiplexing, the maximum number
  of concurrent requests is automatically set to 1.

option keep-conn
no option keep-conn
  Instruct the FastCGI application to keep the connection open or not after
  sending a response.

   If disabled, the FastCGI application closes the connection after responding
   to this request. By default, this option is enabled.

option max-reqs <reqs>
  Define the maximum number of concurrent requests this application will
  accept.

  This option may be overwritten if the variable FCGI_MAX_REQS is retrieved
  during connection establishment. Furthermore, if the application does not
  support connection multiplexing, this option will be ignored. By default set
  to 1.

option mpxs-conns
no option mpxs-conns
  Enable or disable the support of connection multiplexing.

  This option may be overwritten if the variable FCGI_MPXS_CONNS is retrieved
  during connection establishment. It is disabled by default.

set-param <name> <fmt> [ { if | unless } <condition> ]
  Set a FastCGI parameter that should be passed to this application. Its
  value, defined by <fmt> must follows the Custom log format rules (see section
  8.2.6 "Custom Log format"). It may optionally be followed by an ACL-based
  condition, in which case it will only be evaluated if the condition is true.

  With this directive, it is possible to overwrite the value of default FastCGI
  parameters. If the value is evaluated to an empty string, the rule is
  ignored. These directives are evaluated in their declaration order.

  Example :
    # PHP only, required if PHP was built with --enable-force-cgi-redirect
    set-param REDIRECT_STATUS 200

    set-param PHP_AUTH_DIGEST %[req.hdr(Authorization)]


10.1.2. Proxy section
---------------------

use-fcgi-app <name>
  Define the FastCGI application to use for the backend.

  Arguments :
    <name>    is the name of the FastCGI application to use.

  This keyword is only available for HTTP proxies with the backend capability
  and with at least one FastCGI server. However, FastCGI servers can be mixed
  with HTTP servers. But except there is a good reason to do so, it is not
  recommended (see section 10.3 about the limitations for details). Only one
  application may be defined at a time per backend.

  Note that, once a FastCGI application is referenced for a backend, depending
  on the configuration some processing may be done even if the request is not
  sent to a FastCGI server. Rules to set parameters or pass headers to an
  application are evaluated.


10.1.3. Example
---------------

  frontend front-http
      mode http
      bind *:80
      bind *:

      use_backend back-dynamic if { path_reg ^/.+\.php(/.*)?$ }
      default_backend back-static

  backend back-static
      mode http
      server www A.B.C.D:80

  backend back-dynamic
      mode http
      use-fcgi-app php-fpm
      server php-fpm A.B.C.D:9000 proto fcgi

  fcgi-app php-fpm
      log-stderr global
      option keep-conn

      docroot /var/www/my-app
      index index.php
      path-info ^(/.+\.php)(/.*)?$


10.2. Default parameters
------------------------

A Responder FastCGI application has the same purpose as a CGI/1.1 program. In
the CGI/1.1 specification (RFC3875), several variables must be passed to the
script. So HAProxy set them and some others commonly used by FastCGI
applications. All these variables may be overwritten, with caution though.

  +-------------------+-----------------------------------------------------+
  | AUTH_TYPE         | Identifies the mechanism, if any, used by HAProxy   |
  |                   | to authenticate the user. Concretely, only the      |
  |                   | BASIC authentication mechanism is supported.        |
  |                   |                                                     |
  +-------------------+-----------------------------------------------------+
  | CONTENT_LENGTH    | Contains the size of the message-body attached to   |
  |                   | the request. It means only requests with a known    |
  |                   | size are considered as valid and sent to the        |
  |                   | application.                                        |
  |                   |                                                     |
  +-------------------+-----------------------------------------------------+
  | CONTENT_TYPE      | Contains the type of the message-body attached to   |
  |                   | the request. It may not be set.                     |
  |                   |                                                     |
  +-------------------+-----------------------------------------------------+
  | DOCUMENT_ROOT     | Contains the document root on the remote host under |
  |                   | which the script should be executed, as defined in  |
  |                   | the application's configuration.                    |
  |                   |                                                     |
  +-------------------+-----------------------------------------------------+
  | GATEWAY_INTERFACE | Contains the dialect of CGI being used by HAProxy   |
  |                   | to communicate with the FastCGI application.        |
  |                   | Concretely, it is set to "CGI/1.1".                 |
  |                   |                                                     |
  +-------------------+-----------------------------------------------------+
  | PATH_INFO         | Contains the portion of the URI path hierarchy      |
  |                   | following the part that identifies the script       |
  |                   | itself. To be set, the directive "path-info" must   |
  |                   | be defined.                                         |
  |                   |                                                     |
  +-------------------+-----------------------------------------------------+
  | PATH_TRANSLATED   | If PATH_INFO is set, it is its translated version.  |
  |                   | It is the concatenation of DOCUMENT_ROOT and        |
  |                   | PATH_INFO. If PATH_INFO is not set, this parameters |
  |                   | is not set too.                                     |
  |                   |                                                     |
  +-------------------+-----------------------------------------------------+
  | QUERY_STRING      | Contains the request's query string. It may not be  |
  |                   | set.                                                |
  |                   |                                                     |
  +-------------------+-----------------------------------------------------+
  | REMOTE_ADDR       | Contains the network address of the client sending  |
  |                   | the request.                                        |
  |                   |                                                     |
  +-------------------+-----------------------------------------------------+
  | REMOTE_USER       | Contains the user identification string supplied by |
  |                   | client as part of user authentication.              |
  |                   |                                                     |
  +-------------------+-----------------------------------------------------+
  | REQUEST_METHOD    | Contains the method which should be used by the     |
  |                   | script to process the request.                      |
  |                   |                                                     |
  +-------------------+-----------------------------------------------------+
  | REQUEST_URI       | Contains the request's URI.                         |
  |                   |                                                     |
  +-------------------+-----------------------------------------------------+
  | SCRIPT_FILENAME   | Contains the absolute pathname of the script. it is |
  |                   | the concatenation of DOCUMENT_ROOT and SCRIPT_NAME. |
  |                   |                                                     |
  +-------------------+-----------------------------------------------------+
  | SCRIPT_NAME       | Contains the name of the script. If the directive   |
  |                   | "path-info" is defined, it is the first part of the |
  |                   | URI path hierarchy, ending with the script name.    |
  |                   | Otherwise, it is the entire URI path.               |
  |                   |                                                     |
  +-------------------+-----------------------------------------------------+
  | SERVER_NAME       | Contains the name of the server host to which the   |
  |                   | client request is directed. It is the value of the  |
  |                   | header "Host", if defined. Otherwise, the           |
  |                   | destination address of the connection on the client |
  |                   | side.                                               |
  |                   |                                                     |
  +-------------------+-----------------------------------------------------+
  | SERVER_PORT       | Contains the destination TCP port of the connection |
  |                   | on the client side, which is the port the client    |
  |                   | connected to.                                       |
  |                   |                                                     |
  +-------------------+-----------------------------------------------------+
  | SERVER_PROTOCOL   | Contains the request's protocol.                    |
  |                   |                                                     |
  +-------------------+-----------------------------------------------------+
  | SERVER_SOFTWARE   | Contains the string "HAProxy" followed by the       |
  |                   | current HAProxy version.                            |
  |                   |                                                     |
  +-------------------+-----------------------------------------------------+
  | HTTPS             | Set to a non-empty value ("on") if the script was   |
  |                   | queried through the HTTPS protocol.                 |
  |                   |                                                     |
  +-------------------+-----------------------------------------------------+


10.3. Limitations
------------------

The current implementation have some limitations. The first one is about the
way some request headers are hidden to the FastCGI applications. This happens
during the headers analysis, on the backend side, before the connection
establishment. At this stage, HAProxy know the backend is using a FastCGI
application but it don't know if the request will be routed to a FastCGI server
or not. But to hide request headers, it simply removes them from the HTX
message. So, if the request is finally routed to an HTTP server, it never see
these headers. For this reason, it is not recommended to mix FastCGI servers
and HTTP servers under the same backend.

Similarly, the rules "set-param" and "pass-header" are evaluated during the
request headers analysis. So the evaluation is always performed, even if the
requests is finally forwarded to an HTTP server.

About the rules "set-param", when a rule is applied, a pseudo header is added
into the HTX message. So, the same way than for HTTP header rewrites, it may
fail if the buffer is full. The rules "set-param" will compete with
"http-request" ones.

Finally, all FastCGI params and HTTP headers are sent into a unique record
FCGI_PARAM. Encoding of this record must be done in one pass, otherwise a
processing error is returned. It means the record FCGI_PARAM, once encoded,
must not exceeds the size of a buffer. However, there is no reserve to respect
here.


11. Stick-tables and Peers
--------------------------

Stick-tables in HAProxy are a mechanism which permits to associate a certain
number of information and metrics with a key of a certain type, and this for a
certain duration after the last update. This can be seen as a multicolumn line
in a table, where the line number is defined by the key value, and the columns
all represent distinct criteria.

Stick-tables were originally designed to store client-server stickiness
information in order to maintain persistent sessions between these entities. A
client would connect or send a request, this client would be identified via a
discriminator (source address, cookie, URL parameter) and the chosen server
would be stored in association with this discriminator in a stick table for a
configurable duration so that subsequent accesses from the same client could
automatically be routed to the same server, where the client had created its
application session.

Nowadays, stick-tables can store more information than just a server number,
elements such as activity metrics related to a specific client can be stored
(request counts/rates, connection counts/rates, byte counts/rates etc), as well
as some arbitrary event counters ("gpc" for "General Purpose Counters") and
some tags to label a client with certain characteristics ("gpt" for "General
Purpose Tag").

Stick-tables may be referenced by the "stick" directives, which are used for
client-server stickiness, by "track-sc" rules, which are used to describe what
key to track in which table in order to collect metrics, as well as by a number
of sample-fetch functions and converters which can perform an immediate lookup
of a given key to retrieve a specific metric or data. The general principle is
that updates to tables (gpt/gpc/metrics) as well as lookups of stickiness
information refresh the accessed entry and postpone its expiration, while mere
lookups from sample-fetch functions and converters only extract the data
without postponing the entry's expiration.

In order for the mechanism to scale and to resist to HAProxy reloads and fail-
over, it is possible to share stick-tables updates with other nodes called
"peers" via the "Peers" mechanism described in section 11.2. In order to finely
tune the communication with peers, it is possible to also decide that some
tables only receive information from peers, or that updates from peers should
instead be forwarded to a different table.

Finally, stick-tables may be declared either in proxy sections (frontends,
backends) using the "stick-table" keyword, where there may only be one per
section and where they will get the name of that section, or in peers sections
with the "table" keyword followed by the table's name, and which permits to
declare multiple stick-tables in the same "peers" section. If multiple
stick-tables are needed, usually the recommended solution is either to declare
them in a peers section (in case they intend to be shared), or to create extra
backend sections, each with only the "stick-table" definition in them.


11.1. stick-table declaration
-----------------------------

The declaration of a stick-table in a proxy section ("frontend", "backend",
"listen") and in "peers" sections is very similar, with the differences being
that the one in the peers section requires a mandatory name and doesn't take a
"peers" option.

In a "frontend", "backend" or "listen" section:

stick-table type <type> size <size> [expire <expire>] [nopurge] [recv-only]
            [write-to <wtable>] [srvkey <srvkey>] [store <data_type>]*
            [brates-factor <factor>] [peers <peersect>]

In a "peers" section:

table <name> type <type> size <size> [expire <expire>] [nopurge] [recv-only]
             [write-to <wtable>] [srvkey <srvkey>] [store <data_type>]*
             [brates-factor <factor>]

Arguments: (mandatory ones first, then alphabetically sorted):
  - type <type>
             This mandatory argument sets the key type to <type>, which
             usually is a single word but may also have its own arguments:

     * ip        This type should be avoided in favor of a more explicit one such
                 as "ipv4" or "ipv6". Prior to version 3.2 it was the only way to
                 configure IPv4. In 3.2, "ip" is an alias for "ipv4", and "ipv4"
                 is preferred. In a future version, "ip" will instead correspond
                 to "ipv6". It is only meant to ease the transition from pre-3.2
                 to post-3.2.

     * ipv4      A table declared with this type will only store IPv4 addresses.
                 This form is very compact (about 50 bytes per entry) and allows
                 very fast entry lookup and stores with almost no overhead. This
                 is mainly used to store client source IP addresses.

     * ipv6      A table declared with "type ipv6" will only store IPv6 addresses.
                 This form is very compact (about 60 bytes per entry) and allows
                 very fast entry lookup and stores with almost no overhead. This
                 is mainly used to store client source IP addresses.

     * integer   A table declared with "type integer" will store 32bit integers
                 which can represent a client identifier found in a request for
                 instance.

     * string [len <len>]
                 A table declared with "type string" will store substrings of
                 up to <len> characters. If the string provided by the pattern
                 extractor is larger than <len>, it will be truncated before
                 being stored. During matching, at most <len> characters will
                 be compared between the string in the table and the extracted
                 pattern. When not specified, the string is automatically
                 limited to 32 characters. Increasing the length can have a
                 non-negligible memory usage impact.

     * binary [len <len>]
                 A table declared with "type binary" will store binary blocks
                 of <len> bytes. If the block provided by the pattern
                 extractor is larger than <len>, it will be truncated before
                 being stored. If the block provided by the sample expression
                 is shorter than <len>, it will be padded by 0. When not
                 specified, the block is automatically limited to 32
                 bytes. Increasing the length can have a non-negligible memory
                 usage impact.

  - size <size>
             This mandatory argument sets maximum number of entries that can
             fit in the table to <size>. This value directly impacts memory
             usage. Count approximately 50 bytes per entry in addition to the
             key size above, and optionally stored metrics, plus the size of a
             string if any. The size supports suffixes "k", "m", "g" for 2^10,
             2^20 and 2^30 factors.

  - expire <delay>
             Defines the maximum duration of an entry in the table since it was
             last created, refreshed using 'track-sc' or matched using 'stick
             match' or 'stick on' rule. The expiration delay <delay> is defined
             using the standard time format, similarly as the various timeouts,
             defaulting to milliseconds. The maximum duration is slightly above
             24 days. See section 2.5 for more information. If this delay is
             not specified, sessions won't automatically expire, but oldest
             entries will be removed upon creation once full. Be sure not to
             use the "nopurge" parameter if not expiration delay is specified.
             Note: 'table_*' converters performs lookups but won't update touch
             expire since they don't require 'track-sc'.

  - brates-factor <factor>
             Specifies a factor to be applied to in/out bytes rate. Instead of
             counting each bytes, blocks of bytes are counted. Internally,
             rates are defined on 32-bits counters, limiting them to about 4
             billion per period. By using this parameter, it is possible to
             have rates exceeding this 4G limit over the defined period. The
             factor must be greater than 0 and lower than or equal to 1024.

  - nopurge  indicates that we refuse to purge older entries when the table is
             full. When not specified and the table is full when HAProxy wants
             to store an entry in it, it will flush a few of the oldest entries
             in order to release some space for the new ones. This is most
             often the desired behavior. In some specific cases, it will be
             desirable to refuse new entries instead of purging the older ones.
             That may be the case when the amount of data to store is far above
             the hardware limits and we prefer not to offer access to new
             clients than to reject the ones already connected. When using this
             parameter, be sure to properly set the "expire" parameter (see
             above).

  - recv-only
             indicates that we don't intend to use the table to perform updates
             on it, but that we only plan on using the table to retrieve data
             from a remote peer which we are interested in. Indeed, the use of
             this keyword enables the retrieval of local-only values such as
             "conn_cur" that are not learned by default as they would conflict
             with local updates performed on the table by the local peer. Use
             of this option is only relevant for tables that are not involved
             in tracking rules or methods that perform update operations on the
             table, or put simpler: remote tables that are only used to
             retrieve information.

  - peers <peersect>
             Entries that are created, updated or refreshed will be sent to the
             peers in section <peersect> for synchronization, and keys learned
             from peers in this section will also be inserted or updated in the
             table. Additionally, on startup, an attempt may be done to learn
             entries from an older instance of the process, designated as the
             "local peer" via this section.

  - srvkey <srvkey>
             Specifies how each server is identified for the purposes of the
             stick table. The valid values are "name" and "addr". If "name" is
             given, then <name> argument for the server (may be generated by a
             template). If "addr" is given, then the server is identified by
             its current network address, including the port. "addr" is
             especially useful if you are using service discovery to generate
             the addresses for servers with peered stick-tables and want to
             consistently use the same host across peers for a stickiness
             token.

  - store <data_type>
             This is used to store additional information in the stick-table.
             This may be used by ACLs in order to control various criteria
             related to the activity of the client matching the stick-table.
             For each item specified here, the size of each entry will be
             inflated so that the additional data can fit. Several data types
             may be stored with an entry. Multiple data types may be specified
             after the "store" keyword, as a comma-separated list.
             Alternatively, it is possible to repeat the "store" keyword
             followed by one or several data types. Except for the "server_id"
             type which is automatically detected and enabled, all data types
             must be explicitly declared to be stored. If an ACL references a
             data type which is not stored, the ACL will simply not match. Some
             data types require an argument which must be passed just after the
             type between parenthesis. See below for the supported data types
             and their arguments.

  - write-to <wtable>
             Specifies the name of another stick table where peers updates will
             be written to in addition to the source table. <wtable> must be of
             the same type as the table being defined and must have the same
             key length, and source table cannot be used as a target table
             itself. Every time an entry update will be received on the source
             table through a peer, HAProxy will try to refresh related <wtable>
             entry. If the entry doesn't exist yet, it will be created, else
             its values will be updated as well as its timer. Note that only
             types that are not involved in arithmetic ops such as server_id,
             server_key and gpt will be written to <wtable> to prevent
             processed values from a remote table from interfering with
             arithmetic operations performed on the local target table. (ie:
             prevent shared cumulative counter from growing indefinitely) One
             common use of this option is to be able to use sticking rules (for
             server persistence) in a peers cluster setup, because matching
             keys will be learned from remote tables.

The data types that can be associated with an entry via the "store" directive
are listed below. It is important to keep in mind that memory requirements may
be important when storing many data types. Indeed, storing all indicators below
at once in each entry can requires hundreds of bytes per entry, or hundreds of
MB for a 1-million entries table. For this reason, the approximate storage size
is mentioned below for each type between brackets after the argument.

Arguments:
  - bytes_in_cnt [4 bytes]
             This is the client to server byte count. It is a positive 64-bit
             integer which counts the cumulative number of bytes received from
             clients which matched this entry. Headers are included in the
             count. This may be used to limit abuse of upload features on photo
             or video servers. Note that the values are measured when the data
             enter haproxy, thus the counts are not affected by compression.

  - bytes_in_rate(<period>) [12 bytes]
             This is a rate counter on bytes from the client to the server.
             It takes an integer parameter <period> which indicates in
             milliseconds the length of the period over which the average is
             measured. It reports the average incoming bytes rate over that
             period, in bytes per period. It may be used to detect users which
             upload too much and too fast. Warning: with large uploads, it is
             possible that the amount of uploaded data will be counted once
             upon termination, thus causing spikes in the average transfer
             speed instead of having a smooth one. This may partially be
             smoothed with "option contstats" though this is not perfect.  Use
             of byte_in_cnt is recommended for better fairness.

  - bytes_out_cnt [4 bytes]
             This is the server to client byte count. It is a positive 64-bit
             integer which counts the cumulative number of bytes sent to
             clients which matched this entry. Headers are included in the
             count. This may be used to limit abuse of bots sucking the whole
             site. Note that the values are measured when the data enter
             haproxy, thus the counts are not affected by compression.

  - bytes_out_rate(<period>) [12 bytes]
             This is a rate counter on bytes from the server to the client.
             It takes an integer parameter <period> which indicates in
             milliseconds the length of the period over which the average is
             measured. It reports the average outgoing bytes rate over that
             period, in bytes per period. It may be used to detect users which
             download too much and too fast. Warning: with large transfers, it
             is possible that the amount of transferred data will be counted
             once upon termination, thus causing spikes in the average transfer
             speed instead of having a smooth one. This may partially be
             smoothed with "option contstats" though this is not perfect
             yet. Use of byte_out_cnt is recommended for better fairness.

  - conn_cnt [4 bytes]
             This is the Connection Count. It is a positive 32-bit integer
             which counts the absolute number of connections received from
             clients which matched this entry. It does not mean the connections
             were accepted, just that they were received.

  - conn_cur [4 bytes]
             This is the Current Connections count. It is a positive 32-bit
             integer which stores the concurrent connection count for the
             entry. It is incremented once an incoming connection matches the
             entry, and decremented once the connection leaves. That way it is
             possible to know at any time the exact number of concurrent
             connections for an entry. This type is not learned from other
             peers by default as it wouldn't represent anything given that it
             would ignore the local count. However, in combination with
             recv-only it can be used to learn the number of concurrent
             connections seen by peers.

  - conn_rate(<period>) [12 bytes]
             This is a connection frequency counter. It takes an integer
             parameter <period> which indicates in milliseconds the length of
             the period over which the average is measured. It reports the
             average incoming connection rate over that period, in connections
             per period. The result is an integer which can be matched using
             ACLs. Whether connections are accepted or rejected has no effect
             on their measurement.

  - glitch_cnt [4 bytes]
             This is the front glitches count. It is a positive 32-bit integer
             which counts the cumulative number of glitches reported on a front
             connection. Glitches correspond to either unusual or unexpected
             actions (protocol- wise) from the client that could indicate a
             badly defective client or possibly an attacker. As such, this
             counter can help in order to decide how to act with them in such
             case.

  - glitch_rate(<period>) [12 bytes]
             This is a frequency counter on glitches. It takes an integer
             parameter <period> which indicates in milliseconds the length of
             the period over which the average is measured. It reports the
             average front glitches rate over that period. It may be used to
             detect defective clients or potential attackers that perform
             uncommon or unexpected actions from a protocol point of view,
             provided that HAProxy flagged them them as such.

  - gpc(<nb>) [4 * <nb> bytes]
             This is an array of <nb> General Purpose Counter elements. This is
             an array of positive 32-bit integers which may be used to count
             anything. Most of the time they will be used as a incremental
             counters on some entries, for instance to note that a limit is
             reached and trigger some actions. This array is limited to a
             maximum of 100 elements: gpc0 to gpc99, to ensure that the build
             of a peer update message can fit into the buffer. Users should
             take in consideration that a large amount of counters will
             increase the data size and the traffic load using peers protocol
             since all data/counters are pushed each time any of them is
             updated. This data_type will exclude the usage of the legacy
             data_types 'gpc0' and 'gpc1' on the same table. Using the 'gpc'
             array data_type, all 'gpc0' and 'gpc1' related sample fetch
             functions and actions will apply to the two first elements of this
             array.

  - gpc_rate(<nb>,<period>) [12 * <nb> bytes]
             This is an array of increment rates of General Purpose Counters
             over a period. Those elements are positive 32-bit integers which
             may be used for anything. Just like <gpc>, the count events, but
             instead of keeping a cumulative number, they maintain the rate at
             which the counter is incremented. Most of the time it will be
             used to measure the frequency of occurrence of certain events
             (e.g. requests to a specific URL). This array is limited to a
             maximum of 100 elements: gpt(100) allowing the storage of gpc0 to
             gpc99, to ensure that the build of a peer update message can fit
             into the buffer.  The array cannot contain less than 1 element:
             use gpc(1) if you want to store only the counter gpc0.  Users
             should take in consideration that a large amount of counters will
             increase the data size and the traffic load using peers protocol
             since all data/counters are pushed each time any of them is
             updated.  This data_type will exclude the usage of the legacy
             data_types 'gpc0_rate' and 'gpc1_rate' on the same table. Using
             the 'gpc_rate' array data_type, all 'gpc0' and 'gpc1' related
             fetches and actions will apply to the two first elements of this
             array.

  - gpc0 [4 bytes]
             This is the first General Purpose Counter. It is a positive 32-bit
             integer integer which may be used for anything. Most of the time
             it will be used to put a special tag on some entries, for instance
             to note that a specific behavior was detected and must be known
             for future matches.

  - gpc0_rate(<period>) [12 bytes]
             This is the increment rate of the first General Purpose Counter
             over a period. It is a positive 32-bit integer integer which may
             be used for anything. Just like <gpc0>, it counts events, but
             instead of keeping a cumulative number, it maintains the rate at
             which the counter is incremented. Most of the time it will be used
             to measure the frequency of occurrence of certain events
             (e.g. requests to a specific URL).

  - gpc1 [4 bytes]
             This is the second General Purpose Counter. It is a positive
             32-bit integer integer which may be used for anything. Most of the
             time it will be used to put a special tag on some entries, for
             instance to note that a specific behavior was detected and must be
             known for future matches.

  - gpc1_rate(<period>) [12 bytes]
             This is the increment rate of the second General Purpose Counter
             over a period. It is a positive 32-bit integer integer which may
             be used for anything. Just like <gpc1>, it counts events, but
             instead of keeping a cumulative number, it maintains the rate at
             which the counter is incremented. Most of the time it will be used
             to measure the frequency of occurrence of certain events
             (e.g. requests to a specific URL).

  - gpt(<nb>) [4 * <nb> bytes]
             This is an array of <nb> General Purpose Tags elements. This is an
             array of positive 32-bit integers which may be used for anything.
             Most of the time they will be used to put a special tags on some
             entries, for instance to note that a specific behavior was
             detected and must be known for future matches. This array is
             limited to a maximum of 100 elements: gpt(100) allowing the
             storage of gpt0 to gpt99, to ensure that the build of a peer
             update message can fit into the buffer. The array cannot contain
             less than 1 element: use gpt(1) if you want to to store only the
             tag gpt0. Users should take in consideration that a large amount
             of counters will increase the data size and the traffic load using
             peers protocol since all data/counters are pushed each time any of
             them is updated.  This data_type will exclude the usage of the
             legacy data_type 'gpt0' on the same table. Using the 'gpt' array
             data_type, all 'gpt0' related fetches and actions will apply to
             the first element of this array.

  - gpt0 [4 bytes]
             This is the first General Purpose Tag. It is a positive 32-bit
             integer which may be used for anything. Most of the time it will
             be used to put a special tag on some entries, for instance to note
             that a specific behavior was detected and must be known for future
             matches.

  - http_req_cnt [4 bytes]
             This is the HTTP request Count. It is a positive 32-bit integer
             which counts the absolute number of HTTP requests received from
             clients which matched this entry. It does not matter whether they
             are valid requests or not. Note that this is different from
             sessions when keep-alive is used on the client side.

  - http_req_rate(<period>) [12 bytes]
             This is a request frequency counter. It takes an integer parameter
             <period> which indicates in milliseconds the length of the period
             over which the average is measured. It reports the average HTTP
             request rate over that period, in requests per period. The result
             is an integer which can be matched using ACLs. It does not matter
             whether they are valid requests or not. Note that this is
             different from sessions when keep-alive is used on the client
             side.

  - http_err_cnt [4 bytes]
             This is the HTTP request Error Count. It is a positive 32-bit
             integer which counts the absolute number of HTTP requests errors
             induced by clients which matched this entry. Errors are counted on
             invalid and truncated requests, as well as on denied or tarpitted
             requests, and on failed authentications. If the server responds
             with 4xx, then the request is also counted as an error since it's
             an error triggered by the client (e.g. vulnerability scan).

  - http_err_rate(<period>) [12 bytes]
             This is an HTTP request frequency counter. It takes an integer
             parameter <period> which indicates in milliseconds the length of
             the period over which the average is measured. It reports the
             average HTTP request error rate over that period, in requests per
             period (see http_err_cnt above for what is accounted as an
             error). The result is an integer which can be matched using ACLs.

  - http_fail_cnt [4 bytes]
             This is the HTTP response Failure Count. It is a positive 32-bit
             integer which counts the absolute number of HTTP response failures
             induced by servers which matched this entry. Errors are counted on
             invalid and truncated responses, as well as any 5xx response other
             than 501 or 505. It aims at being used combined with path or URI
             to detect service failures.

  - http_fail_rate(<period>) [12 bytes]
             This is an HTTP response failure frequency counter. It takes an
             integer parameter <period> which indicates in milliseconds the
             length of the period over which the average is measured. It
             reports the average HTTP response failure rate over that period,
             in requests per period (see http_fail_cnt above for what is
             accounted as a failure). The result is an integer which can be
             matched using ACLs.

  - server_id [4 bytes]
             This is an integer which holds the numeric ID of the server a
             request was assigned to. It is used by the "stick match", "stick
             store", and "stick on" rules. It is automatically enabled when
             referenced. It is important to understand that stickiness based on
             learning information has some limitations, including the fact that
             all learned associations are lost upon restart unless peers are
             properly configured to transfer such information upon restart
             (recommended). In general it can be good as a complement to other
             stickiness mechanisms but not always as the sole mechanism.

  - sess_cnt  [4 bytes]
             This is the Session Count. It is a positive 32-bit integer which
             counts the absolute number of sessions received from clients which
             matched this entry. A session is a connection that was accepted by
             the layer 4 rules ("tcp-request connection").

  - sess_rate(<period>) [12 bytes]
             This is a session frequency counter. It takes an integer parameter
             <period> which indicates in milliseconds the length of the period
             over which the average is measured. It reports the average
             incoming session rate over that period, in sessions per
             period. The result is an integer which can be matched using ACLs.

Example:
      # Keep track of counters of up to 1 million IP addresses over 5 minutes
      # and store a general purpose counter and the average connection rate
      # computed over a sliding window of 30 seconds.
      stick-table type ip size 1m expire 5m store gpc0,conn_rate(30s)

See also : "stick match", "stick on", "stick store-request", "track-sc",
           section 2.5 about time format, section 11.2 about peers, section 9.7
           about bandwidth limitations, and section 7 about ACLs.


11.2. Peers declaration
-----------------------

It is possible to propagate entries of any data-types in stick-tables between
several HAProxy instances over TCP connections in a multi-master fashion. Each
instance pushes its local updates and insertions to remote peers. The pushed
values overwrite remote ones without aggregation.

One exception is the data type "conn_cur" which is never learned from peers by
default as it is supposed to reflect local values. Earlier versions used to
synchronize it by default which was known to cause negative values in active-
active setups, and always-growing values upon reloads or active-passive
switches because the local value would reflect more connections than locally
present. However there are some setups where it could be relevant to learn
this value from peers, for instance when the table is a passive remote table
solely used to learn/monitor data from it without relying on it for write-
oriented operations or updates. To achieve this, the "recv-only" keyword can
be added on the table declaration. In any case, the "conn_cur" info is always
pushed so that monitoring systems can watch it.

Interrupted exchanges are automatically detected and recovered from the last
known point. In addition, during a soft restart, the old process connects to
the new one using such a TCP connection to push all its entries before the new
process tries to connect to other peers. That ensures very fast replication
during a reload, it typically takes a fraction of a second even for large
tables.

Note that Server IDs are used to identify servers remotely, so it is important
that configurations look similar or at least that the same IDs are forced on
each server on all participants.

peers <peersect>
  Creates a new peer list with name <peersect>. It is an independent section,
  which is referenced by one or more stick-tables.

bind [<address>]:port [param*]
bind /<path> [param*]
  Defines the binding parameters of the local peer of this "peers" section.
  Such lines are not supported with "peer" line in the same "peers" section.

disabled
  Disables a peers section. It disables both listening and any synchronization
  related to this section. This is provided to disable synchronization of stick
  tables without having to comment out all "peers" references.

default-bind [param*]
  Defines the binding parameters for the local peer, excepted its address.

default-server [param*]
  Change default options for a server in a "peers" section.

  Arguments:
    <param*>  is a list of parameters for this server. The "default-server"
              keyword accepts an important number of options and has a complete
              section dedicated to it. In a peers section, the transport
              parameters of a "default-server" line are supported. Please refer
              to section 5 for more details, and the "server" keyword below in
              this section for some of the restrictions.

  See also: "server" and section 5 about server options

enabled
  This re-enables a peers section which was previously disabled via the
  "disabled" keyword.

log <target> [len <length>] [format <format>] [sample <ranges>:<sample_size>]
    <facility> [<level> [<minlevel>]]
  "peers" sections support the same "log" keyword as for the proxies to
  log information about the "peers" listener. See "log" option for proxies for
  more details.

peer <peername> [<address>]:port [param*]
peer <peername> /<path> [param*]
  Defines a peer inside a peers section.
  If <peername> is set to the local peer name (by default hostname, or forced
  using "-L" command line option or "localpeer" global configuration setting),
  HAProxy will listen for incoming remote peer connection on the provided
  address.  Otherwise, the address defines where to connect to in order to join
  the remote peer, and <peername> is used at the protocol level to identify and
  validate the remote peer on the server side.

  During a soft restart, local peer address is used by the old instance to
  connect the new one and initiate a complete replication (teaching process).

  It is strongly recommended to have the exact same peers declaration on all
  peers and to only rely on the "-L" command line argument or the "localpeer"
  global configuration setting to change the local peer name. This makes it
  easier to maintain coherent configuration files across all peers.

  You may want to reference some environment variables in the address
  parameter, see section 2.3 about environment variables.

  Note: "peer" keyword may transparently be replaced by "server" keyword (see
  "server" keyword explanation below).

server <peername> [<address>:<port>] [param*]
server <peername> [/<path>] [param*]
  As previously mentioned, "peer" keyword may be replaced by "server" keyword
  with a support for all "server" parameters found in 5.2 paragraph that are
  related to transport settings. If the underlying peer is local, the address
  parameter must not be present; it must be provided on a "bind" line (see
  "bind" keyword of this "peers" section).

  A number of "server" parameters are irrelevant for "peers" sections. Peers by
  nature do not support dynamic host name resolution nor health checks, hence
  parameters like "init_addr", "resolvers", "check", "agent-check", or "track"
  are not supported. Similarly, there is no load balancing nor stickiness, thus
  parameters such as "weight" or "cookie" have no effect.

  Example:
    # The old way.
    peers mypeers
        peer haproxy1 192.168.0.1:1024
        peer haproxy2 192.168.0.2:1024
        peer haproxy3 10.2.0.1:1024

    backend mybackend
        mode tcp
        balance roundrobin
        stick-table type ip size 20k peers mypeers
        stick on src

        server srv1 192.168.0.30:80
        server srv2 192.168.0.31:80

   Example:
     peers mypeers
        bind 192.168.0.1:1024 ssl crt mycerts/pem
        default-server ssl verify none
        server haproxy1 #local peer
        server haproxy2 192.168.0.2:1024
        server haproxy3 10.2.0.1:1024

shards <shards>

  In some configurations, one would like to distribute the stick-table contents
  to some peers in place of sending all the stick-table contents to each peer
  declared in the "peers" section. In such cases, "shards" specifies the
  number of peer involved in this stick-table contents distribution.
  See also "shard" server parameter.

table <tablename> type {ip | integer | string [len <length>] | binary [len <length>]}
      size <size> [expire <expire>] [write-to <wtable>] [nopurge] [store <data_type>]*
      [recv-only]

  Configure a stickiness table for the current section. This line is parsed
  exactly the same way as the "stick-table" keyword in others section, except
  for the "peers" argument which is not required here and with an additional
  mandatory first parameter to designate the stick-table. Contrary to others
  sections, there may be several "table" lines in "peers" sections (see also
  the complete definition of the "table" and "stick-table" keywords in
  section 11.1 above).

  Also be aware of the fact that "peers" sections have their own stick-table
  namespaces to avoid collisions between stick-table names identical in
  different "peers" section. This is internally handled prepending the "peers"
  sections names to the name of the stick-tables followed by a '/' character.
  If somewhere else in the configuration file you have to refer to such
  stick-tables declared in "peers" sections you must use the prefixed version
  of the stick-table name as follows:

      peers mypeers
          peer A ...
          peer B ...
          table t1 ...

      frontend fe1
          tcp-request content track-sc0 src table mypeers/t1

  This is also this prefixed version of the stick-table names which must be
  used to refer to stick-tables through the CLI.

  About "peers" protocol, as only "peers" belonging to the same section may
  communicate with each others, there is no need to do such a distinction.
  Several "peers" sections may declare stick-tables with the same name.
  This is shorter version of the stick-table name  which is sent over the network.
  There is only a '/' character as prefix to avoid stick-table name collisions between
  stick-tables declared as backends and stick-table declared in "peers" sections
  as follows in this weird but supported configuration:

      peers mypeers
          peer A ...
          peer B ...
          table t1 type string size 10m store gpc0

      backend t1
          stick-table type string size 10m store gpc0 peers mypeers

  Here "t1" table declared in "mypeers" section has "mypeers/t1" as global name.
  "t1" table declared as a backend as "t1" as global name. But at peer protocol
  level the former table is named "/t1", the latter is again named "t1".

12. Other sections
------------------

The sections described below are less commonly used and usually support only a
few parameters. There is no implicit relation between any of them. They're all
started using a single keyword. None of them is permitted before a "global"
section. The support for some of them might be conditionned by build options
(e.g. anything SSL-related).

12.1. Traces
------------

For debugging purpose, it is possible to activate traces on an HAProxy's
subsystem. This will dump debug messages about a specific subsystem. It is a
very powerful tool to diagnose issues. Traces can be dynamically configured via
the CLI. It is also possible to predefined some settings in the configuration
file, in dedicated "traces" sections. More details about traces can be found in
the management guide. It remains a developer tools used during complex
debugging sessions.  It is pretty verbose and have a cost, so use it with
caution. And because it is a developer tool, there is no warranty about the
backward compatibility of this section.

traces
  Starts a new traces section. One or multiple "traces" section may be
  used. All direcitives are evaluated in the declararion order, the last ones
  overriding previous ones.

trace <source> <args...>
  Configures on "trace" subsystem. Each of them can be found in the management
  manual, and follow the exact same syntax. Any output that the "trace"
  command would produce will be emitted during the parsing step of the
  section. Most of the time these will be errors and warnings, but certain
  incomplete commands might list permissible choices. This command is not meant
  for regular use, it will generally only be suggested by developers along
  complex debugging sessions. It is important to keep in mind that depending on
  the trace level and details, enabling traces can severely degrade the global
  performance. Please refer to the management manual for the statements syntax.

  Example:
    ring buf1
      size 10485760 # 10MB
      format timed
      backing-file /tmp/h1.traces

    ring buf2
      size 10485760 # 10MB
      format timed
      backing-file /tmp/h2.traces

    traces
      trace h1 sink buf1 level developer verbosity complete start now
      trace h2 sink buf1 level developer verbosity complete start now

12.2. Userlists
---------------

It is possible to control access to frontend/backend/listen sections or to
http stats by allowing only authenticated and authorized users. To do this,
it is required to create at least one userlist and to define users.

userlist <listname>
  Creates new userlist with name <listname>. Many independent userlists can be
  used to store authentication & authorization data for independent customers.

group <groupname> [users <user>,<user>,(...)]
  Adds group <groupname> to the current userlist. It is also possible to
  attach users to this group by using a comma separated list of names
  proceeded by "users" keyword.

user <username> [password|insecure-password <password>]
                [groups <group>,<group>,(...)]
  Adds user <username> to the current userlist. Both secure (encrypted) and
  insecure (unencrypted) passwords can be used. Encrypted passwords are
  evaluated using the crypt(3) function, so depending on the system's
  capabilities, different algorithms are supported. For example, modern Glibc
  based Linux systems support MD5, SHA-256, SHA-512, and, of course, the
  classic DES-based method of encrypting passwords.

  Attention: Be aware that using encrypted passwords might cause significantly
  increased CPU usage, depending on the number of requests, and the algorithm
  used. For any of the hashed variants, the password for each request must
  be processed through the chosen algorithm, before it can be compared to the
  value specified in the config file. Most current algorithms are deliberately
  designed to be expensive to compute to achieve resistance against brute
  force attacks. They do not simply salt/hash the clear text password once,
  but thousands of times. This can quickly become a major factor in HAProxy's
  overall CPU consumption, and can even lead to application crashes!

  To address the high CPU usage of hash functions, one approach is to reduce
  the number of rounds of the hash function (SHA family algorithms) or decrease
  the "cost" of the function, if the algorithm supports it.

  As a side note, musl (e.g. Alpine Linux) implementations are known to be
  slower than their glibc counterparts when calculating hashes, so you might
  want to consider this aspect too.

  All passwords are considered normal arguments and are therefor subject to
  regular section 2.2 Quoting and escaping. Single quoting passwords is
  therefor recommended.

  Example:
        userlist L1
          group G1 users tiger,scott
          group G2 users xdb,scott

          user tiger password $6$k6y3o.eP$JlKBx9za9667qe4(...)xHSwRv6J.C0/D7cV91
          user scott insecure-password 'elgato'
          user xdb insecure-password 'hello'

        userlist L2
          group G1
          group G2

          user tiger password $6$k6y3o.eP$JlKBx(...)xHSwRv6J.C0/D7cV91 groups G1
          user scott insecure-password 'elgato' groups G1,G2
          user xdb insecure-password 'hello' groups G2

  Please note that both lists are functionally identical.


12.3. Mailers
-------------

It is possible to send email alerts when the state of servers changes.
If configured email alerts are sent to each mailer that is configured
in a mailers section. Email is sent to mailers through Lua (see
examples/lua/mailers.lua).

mailers <mailersect>
  Creates a new mailer list with the name <mailersect>. It is an
  independent section which is referenced by one or more proxies.

mailer <mailername> <ip>:<port>
  Defines a mailer inside a mailers section.

  Example:
    global
        # mailers.lua file as provided in the git repository
        # adjust path as needed
        lua-load examples/lua/mailers.lua

    mailers mymailers
        mailer smtp1 192.168.0.1:587
        mailer smtp2 192.168.0.2:587

    backend mybackend
        mode tcp
        balance roundrobin

        email-alert mailers mymailers
        email-alert from test1@horms.org
        email-alert to test2@horms.org

        server srv1 192.168.0.30:80
        server srv2 192.168.0.31:80

timeout mail <time>
  Defines the time available for a mail/connection to be made and send to
  the mail-server. If not defined the default value is 10 seconds. To allow
  for at least two SYN-ACK packets to be send during initial TCP handshake it
  is advised to keep this value above 4 seconds.

  Example:
    mailers mymailers
        timeout mail 20s
        mailer smtp1 192.168.0.1:587

12.4. HTTP-errors
-----------------

It is possible to globally declare several groups of HTTP errors, to be
imported afterwards in any proxy section. Same group may be referenced at
several places and can be fully or partially imported.

http-errors <name>
  Create a new http-errors group with the name <name>. It is an independent
  section that may be referenced by one or more proxies using its name.

errorfile <code> <file>
  Associate a file contents to an HTTP error code

  Arguments :
    <code>    is the HTTP status code. Currently, HAProxy is capable of
              generating codes 200, 400, 401, 403, 404, 405, 407, 408, 410,
              425, 429, 500, 501, 502, 503, and 504.

    <file>    designates a file containing the full HTTP response. It is
              recommended to follow the common practice of appending ".http" to
              the filename so that people do not confuse the response with HTML
              error pages, and to use absolute paths, since files are read
              before any chroot is performed.

  Please referrers to "errorfile" keyword in section 4 for details.

  Example:
    http-errors website-1
        errorfile 400 /etc/haproxy/errorfiles/site1/400.http
        errorfile 404 /etc/haproxy/errorfiles/site1/404.http
        errorfile 408 /dev/null  # work around Chrome pre-connect bug

    http-errors website-2
        errorfile 400 /etc/haproxy/errorfiles/site2/400.http
        errorfile 404 /etc/haproxy/errorfiles/site2/404.http
        errorfile 408 /dev/null  # work around Chrome pre-connect bug

12.5. Rings
-----------

It is possible to globally declare ring-buffers, to be used as target for log
servers or traces.

ring <ringname>
  Creates a new ring-buffer with name <ringname>.

backing-file <path>
  This replaces the regular memory allocation by a RAM-mapped file to store the
  ring. This can be useful for collecting traces or logs for post-mortem
  analysis, without having to attach a slow client to the CLI. Newer contents
  will automatically replace older ones so that the latest contents are always
  available. The contents written to the ring will be visible in that file once
  the process stops (most often they will even be seen very soon after but
  there is no such guarantee since writes are not synchronous).

  When this option is used, the total storage area is reduced by the size of
  the "struct ring" that starts at the beginning of the area, and that is
  required to recover the area's contents. The file will be created with the
  starting user's ownership, with mode 0600 and will be of the size configured
  by the "size" directive. When the directive is parsed (thus even during
  config checks), any existing non-empty file will first be renamed with the
  extra suffix ".bak", and any previously existing file with suffix ".bak" will
  be removed. This ensures that instant reload or restart of the process will
  not wipe precious debugging information, and will leave time for an admin to
  spot this new ".bak" file and to archive it if needed. As such, after a crash
  the file designated by <path> will contain the freshest information, and if
  the service is restarted, the "<path>.bak" file will have it instead. This
  means that the total storage capacity required will be double of the ring
  size. Failures to rotate the file are silently ignored, so placing the file
  into a directory without write permissions will be sufficient to avoid the
  backup file if not desired.

  WARNING: there are stability and security implications in using this feature.
  First, backing the ring to a slow device (e.g. physical hard drive) may cause
  perceptible slowdowns during accesses, and possibly even panics if too many
  threads compete for accesses. Second, an external process modifying the area
  could cause the haproxy process to crash or to overwrite some of its own
  memory with traces. Third, if the file system fills up before the ring,
  writes to the ring may cause the process to crash.

  The information present in this ring are structured and are NOT directly
  readable using a text editor (even though most of it looks barely readable).
  The output of this file is only intended for developers.

description <text>
  The description is an optional description string of the ring. It will
  appear on CLI. By default, <name> is reused to fill this field.

format <format>
  Format used to store events into the ring buffer.

  Arguments:
    <format> is the log format used when generating syslog messages. It may be
             one of the following :

      iso     A message containing only the ISO date, followed by the text.
              The PID, process name and system name are omitted. This is
              designed to be used with a local log server.

      local   Analog to rfc3164 syslog message format except that hostname
              field is stripped. This is the default.
              Note: option "log-send-hostname" switches the default to
              rfc3164.

      raw     A message containing only the text. The level, PID, date, time,
              process name and system name are omitted. This is designed to be
              used in containers or during development, where the severity
              only depends on the file descriptor used (stdout/stderr). This
              is the default.

      rfc3164 The RFC3164 syslog message format.
              (https://tools.ietf.org/html/rfc3164)

      rfc5424 The RFC5424 syslog message format.
              (https://tools.ietf.org/html/rfc5424)

      short   A message containing only a level between angle brackets such as
              '<3>', followed by the text. The PID, date, time, process name
              and system name are omitted. This is designed to be used with a
              local log server. This format is compatible with what the systemd
              logger consumes.

     priority A message containing only a level plus syslog facility between angle
              brackets such as '<63>', followed by the text. The PID, date, time,
              process name and system name are omitted. This is designed to be used
              with a local log server.

      timed   A message containing only a level between angle brackets such as
              '<3>', followed by ISO date and by the text. The PID, process
              name and system name are omitted. This is designed to be
              used with a local log server.

maxlen <length>
  The maximum length of an event message stored into the ring,
  including formatted header. If an event message is longer than
  <length>, it will be truncated to this length.

server <name> <address> [param*]
  Used to configure a syslog tcp server to forward messages from ring buffer.
  This supports for all "server" parameters found in 5.2 paragraph. Some of
  these parameters are irrelevant for "ring" sections. Important point: there
  is little reason to add more than one server to a ring, because all servers
  will receive the exact same copy of the ring contents, and as such the ring
  will progress at the speed of the slowest server. If one server does not
  respond, it will prevent old messages from being purged and may block new
  messages from being inserted into the ring. The proper way to send messages
  to multiple servers is to use one distinct ring per log server, not to
  attach multiple servers to the same ring. Note that specific server directive
  "log-proto" is used to set the protocol used to send messages.

size <size>
  This is the optional size in bytes for the ring-buffer. Default value is
  set to BUFSIZE.

timeout connect <timeout>
  Set the maximum time to wait for a connection attempt to a server to succeed.

  Arguments :
    <timeout> is the timeout value specified in milliseconds by default, but
              can be in any other unit if the number is suffixed by the unit,
              as explained at the top of this document.

timeout server <timeout>
  Set the maximum time for pending data staying into output buffer.

  Arguments :
    <timeout> is the timeout value specified in milliseconds by default, but
              can be in any other unit if the number is suffixed by the unit,
              as explained at the top of this document.

  Example:
    global
        log ring@myring local7

    ring myring
        description "My local buffer"
        format rfc5424
        maxlen 1200
        size 32764
        timeout connect 5s
        timeout server 10s
        server mysyslogsrv 127.0.0.1:6514 log-proto octet-count

12.6. Log forwarding
--------------------

It is possible to declare one or multiple log forwarding section,
HAProxy will forward all received log messages to a log servers list.

log-forward <name>
  Creates a new log forwarder proxy identified as <name>.

backlog <conns>
  Give hints to the system about the approximate listen backlog desired size
  on connections accept.

bind <addr> [param*]
  Used to configure a stream log listener to receive messages to forward.
  This supports the "bind" parameters found in 5.1 paragraph including
  those about ssl but some statements such as "alpn" may be irrelevant for
  syslog protocol over TCP.
  Those listeners support both "Octet Counting" and "Non-Transparent-Framing"
  modes as defined in rfc-6587.

dgram-bind <addr> [param*]
  Used to configure a datagram log listener to receive messages to forward.
  Addresses must be in IPv4 or IPv6 form,followed by a port. This supports
  for some of the "bind" parameters found in 5.1 paragraph among which
  "interface", "namespace" or "transparent", the other ones being
  silently ignored as irrelevant for UDP/syslog case.

log global
log <target> [len <length>] [format <format>] [sample <ranges>:<sample_size>]
    <facility> [<level> [<minlevel>]]
  Used to configure target log servers. See more details on proxies
  documentation.
  If no format specified, HAProxy tries to keep the incoming log format.
  Configured facility is ignored, except if incoming message does not
  present a facility but one is mandatory on the outgoing format.
  If there is no timestamp available in the input format, but the field
  exists in output format, HAProxy will use the local date.

  Example:
    global
       log stderr format iso local7

    ring myring
        description "My local buffer"
        format rfc5424
        maxlen 1200
        size 32764
        timeout connect 5s
        timeout server 10s
        # syslog tcp server
        server mysyslogsrv 127.0.0.1:514 log-proto octet-count

    log-forward sylog-loadb
        dgram-bind 127.0.0.1:1514
        bind 127.0.0.1:1514
        # all messages on stderr
        log global
        # all messages on local tcp syslog server
        log ring@myring local0
        # load balance messages on 4 udp syslog servers
        log 127.0.0.1:10001 sample 1:4 local0
        log 127.0.0.1:10002 sample 2:4 local0
        log 127.0.0.1:10003 sample 3:4 local0
        log 127.0.0.1:10004 sample 4:4 local0

maxconn <conns>
  Fix the maximum number of concurrent connections on a log forwarder.
  10 is the default.

timeout client <timeout>
  Set the maximum inactivity time on the client side.

option assume-rfc6587-ntf
  Directs HAProxy to treat incoming TCP log streams always as using
  non-transparent framing. This option simplifies the framing logic and ensures
  consistent handling of messages, particularly useful when dealing with
  improperly formed starting characters.

option dont-parse-log
  Enables HAProxy to relay syslog messages without attempting to parse and
  restructure them, useful for forwarding messages that may not conform to
  traditional formats. This option should be used with the format raw setting on
  destination log targets to ensure the original message content is preserved.

option host { replace | fill | keep | append }
  Set the host strategy that should be used on the log-forward section
  regarding syslog hostname field for outbound rfc3164 or rfc5424 messages.

      replace If input message already contains a value for the hostname field,
              we replace it by the source IP address from the sender.
              If input message doesn't contain a value for the hostname field
              (ie: '-' as input rfc5424 message or non compliant rfc3164 or
              rfc5424 message), we use the source IP address from the sender as
              hostname field.

      fill    If input message already contains a value for the hostname field,
              we keep it.
              If input message doesn't contain a value for the hostname field
              (ie: '-' as input rfc5424 message or non compliant rfc3164 or
              rfc5424 message), we use the source IP address from the sender as
              hostname field.
              (This is the default)

      keep    If input message already contains a value for the hostname field,
              we keep it.
              If input message doesn't contain a value for the hostname field,
              we set it to 'localhost' (rfc3164) or '-' (rfc5424).

      append  If input message already contains a value for the hostname field,
              we append a comma followed by the IP address from the sender.
              If input message doesn't contain a value for the hostname field,
              we use the source IP address from the sender.

  For all options above, if the source IP address from the sender is not
  available (ie: UNIX/ABNS socket), then the resulting strategy is "keep".

  Note that this option is only relevant for rfc3164 or rfc5424 destination
  log format. Else setting the option will have no visible effect.

12.7. Certificate Storage
-------------------------

HAProxy uses an internal storage mechanism to load and store certificates used
in the configuration. This storage can be configured by using a "crt-store"
section. It allows to configure certificate definitions and which files should
be loaded in it. A certificate definition must be written before it is used
elsewhere in the configuration.

crt-store [<name>]

The "crt-store" takes an optional name in argument. If a name is specified,
every certificate of this store must be referenced using "@<name>/<crt>" or
"@<name>/<alias>".

Files in the certificate storage can also be updated dynamically with the CLI.
See "set ssl cert" in the section 9.3 of the management guide.


The following keywords are supported in the "crt-store" section :
  - crt-base
  - key-base
  - load

crt-base <dir>
  Assigns a default directory to fetch SSL certificates from when a relative
  path is used with "crt" directives. Absolute locations specified prevail and
  ignore "crt-base". When used in a crt-store, the crt-base of the global
  section is ignored.

key-base <dir>
  Assigns a default directory to fetch SSL private keys from when a relative
  path is used with "key" directives. Absolute locations specified prevail and
  ignore "key-base". When used in a crt-store, the key-base of the global
  section is ignored.

load [crt <filename>] [param*]
  Load SSL files in the certificate storage. For the parameter list, see section
  "12.7.1. Load options"

Example:

    crt-store
        load crt "site1.crt" key "site1.key" ocsp "site1.ocsp" alias "site1"
        load crt "site2.crt" key "site2.key"

    frontend in2
        bind *:443 ssl crt "@/site1" crt "site2.crt"

    crt-store web
        crt-base /etc/ssl/certs/
        key-base /etc/ssl/private/
        load crt "site3.crt" alias "site3"
        load crt "site4.crt" key "site4.key"

    frontend in2
        bind *:443 ssl crt "@/site1" crt "site2.crt"  crt "@web/site3" crt "@web/site4.crt"

12.7.1. Load options
--------------------

Load SSL files in the certificate storage. The load keyword can take multiple
parameters which are listed below. These keywords are also usable in a
crt-list.

crt <filename>
  This argument is mandatory, it loads a PEM which must contain the public
  certificate but could also contain the intermediate certificates and the
  private key.  If no private key is provided in this file, a key can be provided
  with the "key" keyword.

acme <string>
  This option allows to configure the ACME protocol for a given certificate.
  This is an experimental feature which needs the
  "expose-experimental-directives" keyword in the global section.

  See also Section 12.8 ("ACME") and "domains" in this section.

alias <string>
  Optional argument. Allow to name the certificate with an alias, so it can be
  referenced with it in the configuration. An alias must be prefixed with '@/'
  when called elsewhere in the configuration.

domains <string>
  Configure the list of domains that will be used for ACME certificates. The
  first domain of the list is used as the CN. Domains are separated by commas in the list.

  See also Section 12.8 ("ACME") and "acme" in this section.

  Example:

    load crt "example.com.pem" acme LE domains "bar.example.com,foo.example.com"

key <filename>
  This argument is optional. Load a private key in PEM format. If a private key
  was already defined in "crt", it will overwrite it.

ocsp <filename>
  This argument is optional, it loads an OCSP response in DER format. It can
  be updated with the CLI.

issuer <filename>
  This argument is optional. Load the OCSP issuer in PEM format. In order to
  identify which certificate an OCSP Response applies to, the issuer's
  certificate is necessary.  If the issuer's certificate is not found in the
  "crt" file, it could be loaded from a file with this argument.

sctl <filename>
  This argument is optional. Support for Certificate Transparency (RFC6962) TLS
  extension is enabled. The file must contain a valid Signed Certificate
  Timestamp List, as described in RFC. File is parsed to check basic syntax,
  but no signatures are verified.

ocsp-update [ off | on ]
  Enable automatic OCSP response update when set to 'on', disable it otherwise.
  Its value defaults to 'off'.
  To enable the OCSP auto update on a bind line, you can use this option in a
  crt-store or you can use the global option "tune.ocsp-update.mode".
  If a given certificate is used in multiple crt-lists with different values of
  the 'ocsp-update' set, an error will be raised. Likewise, if a certificate
  inherits from the global option on a bind line and has an incompatible
  explicit 'ocsp-update' option set in a crt-list, the same error will be
  raised.

  Examples:

  Here is an example configuration enabling it with a crt-list:

  haproxy.cfg:
      frontend fe
          bind :443 ssl crt-list haproxy.list

  haproxy.list:
      server_cert.pem [ocsp-update on] foo.bar

  Here is an example configuration enabling it with a crt-store:

  haproxy.cfg:

      crt-store
        load crt foobar.pem ocsp-update on

      frontend fe
          bind :443 ssl crt foobar.pem

  When the option is set to 'on', we will try to get an ocsp response whenever
  an ocsp uri is found in the frontend's certificate. The only limitation of
  this mode is that the certificate's issuer will have to be known in order for
  the OCSP certid to be built.
  Each OCSP response will be updated at least once an hour, and even more
  frequently if a given OCSP response has an expire date earlier than this one
  hour limit. A minimum update interval of 5 minutes will still exist in order
  to avoid updating too often responses that have a really short expire time or
  even no 'Next Update' at all. Because of this hard limit, please note that
  when auto update is set to 'on', any OCSP response loaded during init will
  not be updated until at least 5 minutes, even if its expire time ends before
  now+5m. This should not be too much of a hassle since an OCSP response must
  be valid when it gets loaded during init (its expire time must be in the
  future) so it is unlikely that this response expires in such a short time
  after init.
  On the other hand, if a certificate has an OCSP uri specified and no OCSP
  response, setting this option to 'on' for the given certificate will ensure
  that the OCSP response gets fetched automatically right after init.
  The default minimum and maximum delays (5 minutes and 1 hour respectively)
  can be configured by the "ocsp-update.maxdelay" and "ocsp-update.mindelay"
  global options.

  Whenever an OCSP response is updated by the auto update task or following a
  call to the "update ssl ocsp-response" CLI command, a dedicated log line is
  emitted. It follows a dedicated format that contains the following header
  "<OCSP-UPDATE>" and is followed by specific OCSP-related information:
    - the path of the corresponding frontend certificate
    - a numerical update status
    - a textual update status
    - the number of update failures for the given response
    - the number of update successes for the givan response
  See "show ssl ocsp-updates" CLI command for a full list of error codes and
  error messages. This line is emitted regardless of the success or failure of
  the concerned OCSP response update.
  The OCSP request/response is sent and received through an http_client
  instance that has the dontlog-normal option set and that uses the regular
  HTTP log format in case of error (unreachable OCSP responder for instance).
  If such an error occurs, another log line that contains HTTP-related
  information will then be emitted alongside the "regular" OCSP one (which will
  likely have "HTTP error" as text status). But if a purely HTTP error happens
  (unreachable OCSP responder for instance), an extra log line that follows the
  regular HTTP log-format will be emitted.
  Here are two examples of such log lines, with a successful OCSP update log
  line first and then an example of an HTTP error with the two different lines
  (lines were spit and the URL was shortened for readability):
    <133>Mar  6 11:16:53 haproxy[14872]: <OCSP-UPDATE> /path_to_cert/foo.pem 1 \
            "Update successful" 0 1

    <133>Mar  6 11:18:55 haproxy[14872]: <OCSP-UPDATE> /path_to_cert/bar.pem 2 \
            "HTTP error" 1 0
    <133>Mar  6 11:18:55 haproxy[14872]: -:- [06/Mar/2023:11:18:52.200] \
            <OCSP-UPDATE> -/- 2/0/-1/-1/3009 503 217 - - SC-- 0/0/0/0/3 0/0 {} \
            "GET http://127.0.0.1:12345/MEMwQT HTTP/1.1"

  Troubleshooting:
  A common error that can happen with let's encrypt certificates is if the DNS
  resolution provides an IPv6 address and your system does not have a valid
  outgoing IPv6 route. In such a case, you can either create the appropriate
  route or set the "httpclient.resolvers.prefer ipv4" option in the global
  section.
  In case of "OCSP response check failure" error, you might want to check that
  the issuer certificate that you provided is valid.
  A more precise error message might also be displayed between parenthesis
  after the "generic" error message. It can happen for "OCSP response check
  failure" or "Error during insertion" errors.

12.8. ACME
----------

acme <name>

The ACME protocol can be configured using the "acme" section. The section takes
a "<name>" argument, which is used to link a certificate to the section.

The ACME section allows to configure HAProxy as an ACMEv2 client. This feature
is experimental meaning that "expose-experimental-directives" must be in the
global section so this can be used.

Current limitations as of 3.2:
- The feature is limited to the HTTP-01 or DNS-01 challenges for now. HTTP-01
  is completely handled by HAProxy, but DNS-01 needs either the dataplaneAPI or
  another 3rd party tool to talk to a DNS provider API.
- Configuring acme needs a configuration with a crt, it's currently not
  possible to start without this crt on the disk, a key-pair must already exist
  to start haproxy. It is recommanded to use an expired certificate for that.
- The current HAProxy architecture is a non-blocking model, access to the disk
  is not supposed to be done after the configuration is loaded, because it
  could block the event loop, blocking the traffic on the same thread. Meaning
  that the certificates and keys generated from HAProxy will need to be dumped
  from outside HAProxy using "dump ssl cert" on the stats socket. It's possible
  to automate the dump of the certificates by using the dataplaneAPI or the
  haproxy-dump-certs script provided in the admin/cli/ directory.
- External Account Binding (EAB) is not supported.

The ACME scheduler starts at HAProxy startup, it will loop over the
certificates and start an ACME renewal task when the notAfter task is past
curtime + (notAfter - notBefore) / 12, or 7 days if notBefore is not defined.
The scheduler will then sleep and wakeup after 12 hours.
It is possible to start manually a renewal task with "acme renew'.
See also "acme status" in the management guide.

The following keywords are usable in the ACME section:

account-key <filename>
  Configure the path to the account key. The key need to be generated before
  launching HAProxy. If no account keyword is used, the acme section will try
  to load a filename using the section name "<name>.account.key". If the file
  doesn't exist, HAProxy will generate one, using the parameters from the acme
  section.

  You can also generate manually an RSA private key with openssl:

    openssl genrsa -out account.key 2048

  Or an ecdsa one:

    openssl ecparam -name secp384r1 -genkey -noout -out account.key

bits <number>
  Configure the number of bits to generate an RSA certificate. Default to 2048.
  Setting a too high value can trigger a warning if your machine is not
  powerful enough. (This can be configured with "warn-blocked-traffic-after"
  but blocking the traffic too long could trigger the watchdog.)

challenge <string>
  Takes a challenge type as parameter, this must be http-01 or dns-01. When not
  used the default is http-01.

contact <string>
  The contact email that will be associated to the account key in the CA.

curves <string>
  When using the ECDSA keytype, configure the curves. The default is P-384.

directory <string>
  This keyword configures the directory URL for the CA used by this acme
  section. This keyword is mandatory as there is no default URL.

  Example:
    directory https://acme-staging-v02.api.letsencrypt.org/directory

keytype <string>
  Configure the type of key that will be generated. Value can be either "RSA"
  or "ECDSA". You can also configure the "curves" for ECDSA and the number of
  "bits" for RSA. By default EC384 keys are generated.

map <map>
  Configure the map which will be used to store token (key) and thumbprint
  (value), which is useful to reply to a challenge when there are multiple
  account used. The acme task will add entries before validating the challenge
  and will remove the entries at the end of the task.

reuse-key { on | off }
  If set to "on", HAProxy won't generate a new private key and will keep the
  previous one. Rotating private keys is recommended, when enabling this option
  it is recommended to regenerate manually the keys regularly.

  This option might be useful when using RSA keys bigger than 2048 that can
  take time to generate and might slow down one thread doing so.

  Using the same key can be useful when using the cache of your ACME server, it
  can help to retrieve a valid certificate corresponding to the current key.

  The default setting is "off".

Example:

  global
      expose-experimental-directives
      httpclient.resolvers.prefer ipv4

  frontend in
      bind *:80
      bind *:443 ssl
      http-request return status 200 content-type text/plain lf-string "%[path,field(-1,/)].%[path,field(-1,/),map(virt@acme)]\n" if { path_beg '/.well-known/acme-challenge/' }
      ssl-f-use crt "foo.example.com.pem.rsa"   acme LE1 domains "foo.example.com.pem,bar.example.com"
      ssl-f-use crt "foo.example.com.pem.ecdsa" acme LE2 domains "foo.example.com.pem,bar.example.com"

  acme LE1
      directory https://acme-staging-v02.api.letsencrypt.org/directory
      account-key /etc/haproxy/letsencrypt.account.key
      contact john.doe@example.com
      challenge http-01
      keytype RSA
      bits 2048
      map virt@acme

  acme LE2
      directory https://acme-staging-v02.api.letsencrypt.org/directory
      account-key /etc/haproxy/letsencrypt.account.key
      contact john.doe@example.com
      challenge http-01
      keytype ECDSA
      curves P-384
      map virt@acme

12.9. Programs (deprecated)
---------------------------

This section is deprecated and should disappear with HAProxy 3.3. The section
could be replaced easily by separated process managers. Systemd unit files or
sysvinit scripts could replace this section as they are more reliable. In docker
environments, some alternatives can also be found such as s6 or supervisord.

In master-worker mode, it is possible to launch external binaries with the
master, these processes are called programs. These programs are launched and
managed the same way as the workers.

Since version 3.1, the program section has a slightly different behavior, the
section is parsed and the program is started from the master, but the rest of
the configuration is loaded in the worker. This mean the program configuration
is completely separated from the worker configuration, and a program could be
reexecuted even if the worker configuration is wrong upon a reload.

During a reload of HAProxy, those processes are dealing with the same
sequence as a worker:

  - the master is re-executed
  - the master sends a SIGUSR1 signal to the program
  - if "option start-on-reload" is not disabled, the master launches a new
    instance of the program

During a stop, or restart, a SIGTERM is sent to the programs.

program <name>
  This is a new program section, this section will create an instance <name>
  which is visible in "show proc" on the master CLI. (See "9.4. Master CLI" in
  the management guide).

command <command> [arguments*]
  Define the command to start with optional arguments. The command is looked
  up in the current PATH if it does not include an absolute path. This is a
  mandatory option of the program section. Arguments containing spaces must
  be enclosed in quotes or double quotes or be prefixed by a backslash.

user <user name>
  Changes the executed command user ID to the <user name> from /etc/passwd.
  See also "group".

group <group name>
  Changes the executed command group ID to the <group name> from /etc/group.
  See also "user".

option start-on-reload
no option start-on-reload
  Start (or not) a new instance of the program upon a reload of the master.
  The default is to start a new instance. This option may only be used in a
  program section.


/*
 * Local variables:
 *  fill-column: 79
 * End:
 */
